Merge master.kernel.org:/pub/scm/linux/kernel/git/dtor/input

* master.kernel.org:/pub/scm/linux/kernel/git/dtor/input:
  Input: move USB miscellaneous devices under drivers/input/misc
  Input: move USB mice under drivers/input/mouse
  Input: move USB gamepads under drivers/input/joystick
  Input: move USB touchscreens under drivers/input/touchscreen
  Input: move USB tablets under drivers/input/tablet
  Input: i8042 - fix AUX port detection with some chips
  Input: aaed2000_kbd - convert to use polldev library
  Input: drivers/usb/input - usb_buffer_free() cleanup
  Input: synaptics - don't complain about failed resets
  Input: pull input.h into uinpit.h
  Input: drivers/usb/input - fix sparse warnings (signedness)
  Input: evdev - fix some sparse warnings (signedness, shadowing)
  Input: drivers/joystick - fix various sparse warnings
  Input: force feedback - make sure effect is present before playing

47 files changed, 404 insertions, 404 deletions

diff --git a/drivers/input/Kconfig b/drivers/input/Kconfig
index 96232313b1b9..0e9b69535ad6 100644
--- a/drivers/input/Kconfig
+++ b/drivers/input/Kconfig
@@ -153,6 +153,8 @@ source "drivers/input/mouse/Kconfig"
 
 source "drivers/input/joystick/Kconfig"
 
+source "drivers/input/tablet/Kconfig"
+
 source "drivers/input/touchscreen/Kconfig"
 
 source "drivers/input/misc/Kconfig"
diff --git a/drivers/input/Makefile b/drivers/input/Makefile
index b4cd10653c4f..8a2dd987546c 100644
--- a/drivers/input/Makefile
+++ b/drivers/input/Makefile
@@ -18,6 +18,7 @@ obj-$(CONFIG_INPUT_EVBUG)	+= evbug.o
 obj-$(CONFIG_INPUT_KEYBOARD)	+= keyboard/
 obj-$(CONFIG_INPUT_MOUSE)	+= mouse/
 obj-$(CONFIG_INPUT_JOYSTICK)	+= joystick/
+obj-$(CONFIG_INPUT_TABLET)	+= tablet/
 obj-$(CONFIG_INPUT_TOUCHSCREEN)	+= touchscreen/
 obj-$(CONFIG_INPUT_MISC)	+= misc/
 
diff --git a/drivers/input/evdev.c b/drivers/input/evdev.c
index be3dbc1ae67d..55a72592704c 100644
--- a/drivers/input/evdev.c
+++ b/drivers/input/evdev.c
@@ -511,7 +511,7 @@ static long evdev_ioctl_handler(struct file *file, unsigned int cmd,
 
 				if ((_IOC_NR(cmd) & ~EV_MAX) == _IOC_NR(EVIOCGBIT(0,0))) {
 
-					long *bits;
+					unsigned long *bits;
 					int len;
 
 					switch (_IOC_NR(cmd) & EV_MAX) {
@@ -556,7 +556,7 @@ static long evdev_ioctl_handler(struct file *file, unsigned int cmd,
 
 				if ((_IOC_NR(cmd) & ~ABS_MAX) == _IOC_NR(EVIOCGABS(0))) {
 
-					int t = _IOC_NR(cmd) & ABS_MAX;
+					t = _IOC_NR(cmd) & ABS_MAX;
 
 					abs.value = dev->abs[t];
 					abs.minimum = dev->absmin[t];
@@ -576,7 +576,7 @@ static long evdev_ioctl_handler(struct file *file, unsigned int cmd,
 
 				if ((_IOC_NR(cmd) & ~ABS_MAX) == _IOC_NR(EVIOCSABS(0))) {
 
-					int t = _IOC_NR(cmd) & ABS_MAX;
+					t = _IOC_NR(cmd) & ABS_MAX;
 
 					if (copy_from_user(&abs, p, sizeof(struct input_absinfo)))
 						return -EFAULT;
diff --git a/drivers/input/ff-core.c b/drivers/input/ff-core.c
index 783b3412cead..eebc72465fc9 100644
--- a/drivers/input/ff-core.c
+++ b/drivers/input/ff-core.c
@@ -281,7 +281,8 @@ int input_ff_event(struct input_dev *dev, unsigned int type,
 		break;
 
 	default:
-		ff->playback(dev, code, value);
+		if (check_effect_access(ff, code, NULL) == 0)
+			ff->playback(dev, code, value);
 		break;
 	}
 
diff --git a/drivers/input/joystick/Kconfig b/drivers/input/joystick/Kconfig
index 271263443c37..82f563e24fdb 100644
--- a/drivers/input/joystick/Kconfig
+++ b/drivers/input/joystick/Kconfig
@@ -2,7 +2,7 @@
 # Joystick driver configuration
 #
 menuconfig INPUT_JOYSTICK
-	bool "Joysticks"
+	bool "Joysticks/Gamepads"
 	help
 	  If you have a joystick, 6dof controller, gamepad, steering wheel,
 	  weapon control system or something like that you can say Y here
@@ -196,7 +196,7 @@ config JOYSTICK_TWIDJOY
 config JOYSTICK_DB9
 	tristate "Multisystem, Sega Genesis, Saturn joysticks and gamepads"
 	depends on PARPORT
-	---help---
+	help
 	  Say Y here if you have a Sega Master System gamepad, Sega Genesis
 	  gamepad, Sega Saturn gamepad, or a Multisystem -- Atari, Amiga,
 	  Commodore, Amstrad CPC joystick connected to your parallel port.
@@ -253,4 +253,18 @@ config JOYSTICK_JOYDUMP
 	  To compile this driver as a module, choose M here: the
 	  module will be called joydump.
 
+config JOYSTICK_XPAD
+	tristate "X-Box gamepad support"
+	select USB
+	help
+	  Say Y here if you want to use the X-Box pad with your computer.
+	  Make sure to say Y to "Joystick support" (CONFIG_INPUT_JOYDEV)
+	  and/or "Event interface support" (CONFIG_INPUT_EVDEV) as well.
+
+	  For information about how to connect the X-Box pad to USB, see
+	  <file:Documentation/input/xpad.txt>.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called xpad.
+
 endif
diff --git a/drivers/input/joystick/Makefile b/drivers/input/joystick/Makefile
index 5231f6ff75b8..e855abb0cc51 100644
--- a/drivers/input/joystick/Makefile
+++ b/drivers/input/joystick/Makefile
@@ -26,5 +26,6 @@ obj-$(CONFIG_JOYSTICK_TMDC)		+= tmdc.o
 obj-$(CONFIG_JOYSTICK_TURBOGRAFX)	+= turbografx.o
 obj-$(CONFIG_JOYSTICK_TWIDJOY)		+= twidjoy.o
 obj-$(CONFIG_JOYSTICK_WARRIOR)		+= warrior.o
+obj-$(CONFIG_JOYSTICK_XPAD)		+= xpad.o
 
 obj-$(CONFIG_JOYSTICK_IFORCE)		+= iforce/
diff --git a/drivers/input/joystick/analog.c b/drivers/input/joystick/analog.c
index 1c1afb5d4684..bdd157c1ebf8 100644
--- a/drivers/input/joystick/analog.c
+++ b/drivers/input/joystick/analog.c
@@ -53,7 +53,7 @@ MODULE_LICENSE("GPL");
 #define ANALOG_PORTS		16
 
 static char *js[ANALOG_PORTS];
-static int js_nargs;
+static unsigned int js_nargs;
 static int analog_options[ANALOG_PORTS];
 module_param_array_named(map, js, charp, &js_nargs, 0);
 MODULE_PARM_DESC(map, "Describes analog joysticks type/capabilities");
diff --git a/drivers/input/joystick/db9.c b/drivers/input/joystick/db9.c
index c27593bf9978..86ad1027e12a 100644
--- a/drivers/input/joystick/db9.c
+++ b/drivers/input/joystick/db9.c
@@ -46,17 +46,17 @@ MODULE_LICENSE("GPL");
 
 struct db9_config {
 	int args[2];
-	int nargs;
+	unsigned int nargs;
 };
 
 #define DB9_MAX_PORTS		3
-static struct db9_config db9[DB9_MAX_PORTS] __initdata;
+static struct db9_config db9_cfg[DB9_MAX_PORTS] __initdata;
 
-module_param_array_named(dev, db9[0].args, int, &db9[0].nargs, 0);
+module_param_array_named(dev, db9_cfg[0].args, int, &db9_cfg[0].nargs, 0);
 MODULE_PARM_DESC(dev, "Describes first attached device (<parport#>,<type>)");
-module_param_array_named(dev2, db9[1].args, int, &db9[0].nargs, 0);
+module_param_array_named(dev2, db9_cfg[1].args, int, &db9_cfg[0].nargs, 0);
 MODULE_PARM_DESC(dev2, "Describes second attached device (<parport#>,<type>)");
-module_param_array_named(dev3, db9[2].args, int, &db9[2].nargs, 0);
+module_param_array_named(dev3, db9_cfg[2].args, int, &db9_cfg[2].nargs, 0);
 MODULE_PARM_DESC(dev3, "Describes third attached device (<parport#>,<type>)");
 
 #define DB9_ARG_PARPORT		0
@@ -680,17 +680,17 @@ static int __init db9_init(void)
 	int err = 0;
 
 	for (i = 0; i < DB9_MAX_PORTS; i++) {
-		if (db9[i].nargs == 0 || db9[i].args[DB9_ARG_PARPORT] < 0)
+		if (db9_cfg[i].nargs == 0 || db9_cfg[i].args[DB9_ARG_PARPORT] < 0)
 			continue;
 
-		if (db9[i].nargs < 2) {
+		if (db9_cfg[i].nargs < 2) {
 			printk(KERN_ERR "db9.c: Device type must be specified.\n");
 			err = -EINVAL;
 			break;
 		}
 
-		db9_base[i] = db9_probe(db9[i].args[DB9_ARG_PARPORT],
-					db9[i].args[DB9_ARG_MODE]);
+		db9_base[i] = db9_probe(db9_cfg[i].args[DB9_ARG_PARPORT],
+					db9_cfg[i].args[DB9_ARG_MODE]);
 		if (IS_ERR(db9_base[i])) {
 			err = PTR_ERR(db9_base[i]);
 			break;
diff --git a/drivers/input/joystick/gamecon.c b/drivers/input/joystick/gamecon.c
index c71b58fe225d..1a452e0e5f25 100644
--- a/drivers/input/joystick/gamecon.c
+++ b/drivers/input/joystick/gamecon.c
@@ -48,16 +48,16 @@ MODULE_LICENSE("GPL");
 
 struct gc_config {
 	int args[GC_MAX_DEVICES + 1];
-	int nargs;
+	unsigned int nargs;
 };
 
-static struct gc_config gc[GC_MAX_PORTS] __initdata;
+static struct gc_config gc_cfg[GC_MAX_PORTS] __initdata;
 
-module_param_array_named(map, gc[0].args, int, &gc[0].nargs, 0);
+module_param_array_named(map, gc_cfg[0].args, int, &gc_cfg[0].nargs, 0);
 MODULE_PARM_DESC(map, "Describes first set of devices (<parport#>,<pad1>,<pad2>,..<pad5>)");
-module_param_array_named(map2, gc[1].args, int, &gc[1].nargs, 0);
+module_param_array_named(map2, gc_cfg[1].args, int, &gc_cfg[1].nargs, 0);
 MODULE_PARM_DESC(map2, "Describes second set of devices");
-module_param_array_named(map3, gc[2].args, int, &gc[2].nargs, 0);
+module_param_array_named(map3, gc_cfg[2].args, int, &gc_cfg[2].nargs, 0);
 MODULE_PARM_DESC(map3, "Describes third set of devices");
 
 /* see also gs_psx_delay parameter in PSX support section */
@@ -810,16 +810,17 @@ static int __init gc_init(void)
 	int err = 0;
 
 	for (i = 0; i < GC_MAX_PORTS; i++) {
-		if (gc[i].nargs == 0 || gc[i].args[0] < 0)
+		if (gc_cfg[i].nargs == 0 || gc_cfg[i].args[0] < 0)
 			continue;
 
-		if (gc[i].nargs < 2) {
+		if (gc_cfg[i].nargs < 2) {
 			printk(KERN_ERR "gamecon.c: at least one device must be specified\n");
 			err = -EINVAL;
 			break;
 		}
 
-		gc_base[i] = gc_probe(gc[i].args[0], gc[i].args + 1, gc[i].nargs - 1);
+		gc_base[i] = gc_probe(gc_cfg[i].args[0],
+				      gc_cfg[i].args + 1, gc_cfg[i].nargs - 1);
 		if (IS_ERR(gc_base[i])) {
 			err = PTR_ERR(gc_base[i]);
 			break;
diff --git a/drivers/input/joystick/iforce/iforce.h b/drivers/input/joystick/iforce/iforce.h
index dadcf4fb92ae..40a853ac21c7 100644
--- a/drivers/input/joystick/iforce/iforce.h
+++ b/drivers/input/joystick/iforce/iforce.h
@@ -124,7 +124,7 @@ struct iforce {
 	/* Buffer used for asynchronous sending of bytes to the device */
 	struct circ_buf xmit;
 	unsigned char xmit_data[XMIT_SIZE];
-	long xmit_flags[1];
+	unsigned long xmit_flags[1];
 
 					/* Force Feedback */
 	wait_queue_head_t wait;
diff --git a/drivers/input/joystick/turbografx.c b/drivers/input/joystick/turbografx.c
index 0f2c60823b0b..8381c6f14373 100644
--- a/drivers/input/joystick/turbografx.c
+++ b/drivers/input/joystick/turbografx.c
@@ -48,16 +48,16 @@ MODULE_LICENSE("GPL");
 
 struct tgfx_config {
 	int args[TGFX_MAX_DEVICES + 1];
-	int nargs;
+	unsigned int nargs;
 };
 
-static struct tgfx_config tgfx[TGFX_MAX_PORTS] __initdata;
+static struct tgfx_config tgfx_cfg[TGFX_MAX_PORTS] __initdata;
 
-module_param_array_named(map, tgfx[0].args, int, &tgfx[0].nargs, 0);
+module_param_array_named(map, tgfx_cfg[0].args, int, &tgfx_cfg[0].nargs, 0);
 MODULE_PARM_DESC(map, "Describes first set of devices (<parport#>,<js1>,<js2>,..<js7>");
-module_param_array_named(map2, tgfx[1].args, int, &tgfx[1].nargs, 0);
+module_param_array_named(map2, tgfx_cfg[1].args, int, &tgfx_cfg[1].nargs, 0);
 MODULE_PARM_DESC(map2, "Describes second set of devices");
-module_param_array_named(map3, tgfx[2].args, int, &tgfx[2].nargs, 0);
+module_param_array_named(map3, tgfx_cfg[2].args, int, &tgfx_cfg[2].nargs, 0);
 MODULE_PARM_DESC(map3, "Describes third set of devices");
 
 #define TGFX_REFRESH_TIME	HZ/100	/* 10 ms */
@@ -283,16 +283,18 @@ static int __init tgfx_init(void)
 	int err = 0;
 
 	for (i = 0; i < TGFX_MAX_PORTS; i++) {
-		if (tgfx[i].nargs == 0 || tgfx[i].args[0] < 0)
+		if (tgfx_cfg[i].nargs == 0 || tgfx_cfg[i].args[0] < 0)
 			continue;
 
-		if (tgfx[i].nargs < 2) {
+		if (tgfx_cfg[i].nargs < 2) {
 			printk(KERN_ERR "turbografx.c: at least one joystick must be specified\n");
 			err = -EINVAL;
 			break;
 		}
 
-		tgfx_base[i] = tgfx_probe(tgfx[i].args[0], tgfx[i].args + 1, tgfx[i].nargs - 1);
+		tgfx_base[i] = tgfx_probe(tgfx_cfg[i].args[0],
+					  tgfx_cfg[i].args + 1,
+					  tgfx_cfg[i].nargs - 1);
 		if (IS_ERR(tgfx_base[i])) {
 			err = PTR_ERR(tgfx_base[i]);
 			break;
diff --git a/drivers/usb/input/xpad.c b/drivers/input/joystick/xpad.c
index 8c8cd95a6989..8c8cd95a6989 100644
--- a/drivers/usb/input/xpad.c
+++ b/drivers/input/joystick/xpad.c
diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig
index 9f42e4d3649e..bd707b86c114 100644
--- a/drivers/input/keyboard/Kconfig
+++ b/drivers/input/keyboard/Kconfig
@@ -226,6 +226,7 @@ config KEYBOARD_PXA27x
 config KEYBOARD_AAED2000
 	tristate "AAED-2000 keyboard"
 	depends on MACH_AAED2000
+	select INPUT_POLLDEV
 	default y
 	help
 	  Say Y here to enable the keyboard on the Agilent AAED-2000
diff --git a/drivers/input/keyboard/aaed2000_kbd.c b/drivers/input/keyboard/aaed2000_kbd.c
index 3a37505f067c..63d6ead6b877 100644
--- a/drivers/input/keyboard/aaed2000_kbd.c
+++ b/drivers/input/keyboard/aaed2000_kbd.c
@@ -14,12 +14,11 @@
 #include <linux/delay.h>
 #include <linux/platform_device.h>
 #include <linux/init.h>
-#include <linux/input.h>
+#include <linux/input-polldev.h>
 #include <linux/interrupt.h>
 #include <linux/jiffies.h>
 #include <linux/module.h>
 #include <linux/slab.h>
-#include <linux/workqueue.h>
 
 #include <asm/arch/hardware.h>
 #include <asm/arch/aaed2000.h>
@@ -46,8 +45,7 @@ static unsigned char aaedkbd_keycode[NR_SCANCODES] = {
 
 struct aaedkbd {
 	unsigned char keycode[ARRAY_SIZE(aaedkbd_keycode)];
-	struct input_dev *input;
-	struct work_struct workq;
+	struct input_polled_dev *poll_dev;
 	int kbdscan_state[KB_COLS];
 	int kbdscan_count[KB_COLS];
 };
@@ -64,14 +62,15 @@ static void aaedkbd_report_col(struct aaedkbd *aaedkbd,
 		scancode = SCANCODE(row, col);
 		pressed = rowd & KB_ROWMASK(row);
 
-		input_report_key(aaedkbd->input, aaedkbd->keycode[scancode], pressed);
+		input_report_key(aaedkbd->poll_dev->input,
+				 aaedkbd->keycode[scancode], pressed);
 	}
 }
 
 /* Scan the hardware keyboard and push any changes up through the input layer */
-static void aaedkbd_work(void *data)
+static void aaedkbd_poll(struct input_polled_dev *dev)
 {
-	struct aaedkbd *aaedkbd = data;
+	struct aaedkbd *aaedkbd = dev->private;
 	unsigned int col, rowd;
 
 	col = 0;
@@ -90,51 +89,34 @@ static void aaedkbd_work(void *data)
 	} while (col < KB_COLS);
 
 	AAEC_GPIO_KSCAN = 0x07;
-	input_sync(aaedkbd->input);
-
-	schedule_delayed_work(&aaedkbd->workq, msecs_to_jiffies(SCAN_INTERVAL));
-}
-
-static int aaedkbd_open(struct input_dev *indev)
-{
-	struct aaedkbd *aaedkbd = input_get_drvdata(indev);
-
-	schedule_delayed_work(&aaedkbd->workq, msecs_to_jiffies(SCAN_INTERVAL));
-
-	return 0;
-}
-
-static void aaedkbd_close(struct input_dev *indev)
-{
-	struct aaedkbd *aaedkbd = input_get_drvdata(indev);
-
-	cancel_delayed_work(&aaedkbd->workq);
-	flush_scheduled_work();
+	input_sync(dev->input);
 }
 
 static int __devinit aaedkbd_probe(struct platform_device *pdev)
 {
 	struct aaedkbd *aaedkbd;
+	struct input_polled_dev *poll_dev;
 	struct input_dev *input_dev;
 	int i;
 	int error;
 
 	aaedkbd = kzalloc(sizeof(struct aaedkbd), GFP_KERNEL);
-	input_dev = input_allocate_device();
-	if (!aaedkbd || !input_dev) {
+	poll_dev = input_allocate_polled_device();
+	if (!aaedkbd || !poll_dev) {
 		error = -ENOMEM;
 		goto fail;
 	}
 
 	platform_set_drvdata(pdev, aaedkbd);
 
-	aaedkbd->input = input_dev;
-
-	/* Init keyboard rescan workqueue */
-	INIT_WORK(&aaedkbd->workq, aaedkbd_work, aaedkbd);
-
+	aaedkbd->poll_dev = poll_dev;
 	memcpy(aaedkbd->keycode, aaedkbd_keycode, sizeof(aaedkbd->keycode));
 
+	poll_dev->private = aaedkbd;
+	poll_dev->poll = aaedkbd_poll;
+	poll_dev->poll_interval = SCAN_INTERVAL;
+
+	input_dev = poll_dev->input;
 	input_dev->name = "AAED-2000 Keyboard";
 	input_dev->phys = "aaedkbd/input0";
 	input_dev->id.bustype = BUS_HOST;
@@ -143,8 +125,6 @@ static int __devinit aaedkbd_probe(struct platform_device *pdev)
 	input_dev->id.version = 0x0100;
 	input_dev->dev.parent = &pdev->dev;
 
-	input_set_drvdata(input_dev, aaedkbd);
-
 	input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_REP);
 	input_dev->keycode = aaedkbd->keycode;
 	input_dev->keycodesize = sizeof(unsigned char);
@@ -154,17 +134,14 @@ static int __devinit aaedkbd_probe(struct platform_device *pdev)
 		set_bit(aaedkbd->keycode[i], input_dev->keybit);
 	clear_bit(0, input_dev->keybit);
 
-	input_dev->open = aaedkbd_open;
-	input_dev->close = aaedkbd_close;
-
-	error = input_register_device(aaedkbd->input);
+	error = input_register_polled_device(aaedkbd->poll_dev);
 	if (error)
 		goto fail;
 
 	return 0;
 
  fail:	kfree(aaedkbd);
-	input_free_device(input_dev);
+	input_free_polled_device(poll_dev);
 	return error;
 }
 
@@ -172,7 +149,8 @@ static int __devexit aaedkbd_remove(struct platform_device *pdev)
 {
 	struct aaedkbd *aaedkbd = platform_get_drvdata(pdev);
 
-	input_unregister_device(aaedkbd->input);
+	input_unregister_polled_device(aaedkbd->poll_dev);
+	input_free_polled_device(aaedkbd->poll_dev);
 	kfree(aaedkbd);
 
 	return 0;
diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
index 1d0d3e765db6..6013ace94d98 100644
--- a/drivers/input/misc/Kconfig
+++ b/drivers/input/misc/Kconfig
@@ -40,6 +40,18 @@ config INPUT_M68K_BEEP
 	tristate "M68k Beeper support"
 	depends on M68K
 
+config INPUT_IXP4XX_BEEPER
+	tristate "IXP4XX Beeper support"
+	depends on ARCH_IXP4XX
+	help
+	  If you say yes here, you can connect a beeper to the
+	  ixp4xx gpio pins. This is used by the LinkSys NSLU2.
+
+	  If unsure, say Y.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called ixp4xx-beeper.
+
 config INPUT_COBALT_BTNS
 	tristate "Cobalt button interface"
 	depends on MIPS_COBALT
@@ -70,17 +82,79 @@ config INPUT_ATLAS_BTNS
 	  To compile this driver as a module, choose M here: the module will
 	  be called atlas_btns.
 
-config INPUT_IXP4XX_BEEPER
-	tristate "IXP4XX Beeper support"
-	depends on ARCH_IXP4XX
+config INPUT_ATI_REMOTE
+	tristate "ATI / X10 USB RF remote control"
+	select USB
 	help
-	  If you say yes here, you can connect a beeper to the
-	  ixp4xx gpio pins. This is used by the LinkSys NSLU2.
+	  Say Y here if you want to use an ATI or X10 "Lola" USB remote control.
+	  These are RF remotes with USB receivers.
+	  The ATI remote comes with many of ATI's All-In-Wonder video cards.
+	  The X10 "Lola" remote is available at:
+	     <http://www.x10.com/products/lola_sg1.htm>
+	  This driver provides mouse pointer, left and right mouse buttons,
+	  and maps all the other remote buttons to keypress events.
+
+	  To compile this driver as a module, choose M here: the module will be
+	  called ati_remote.
+
+config INPUT_ATI_REMOTE2
+	tristate "ATI / Philips USB RF remote control"
+	select USB
+	help
+	  Say Y here if you want to use an ATI or Philips USB RF remote control.
+	  These are RF remotes with USB receivers.
+	  ATI Remote Wonder II comes with some ATI's All-In-Wonder video cards
+	  and is also available as a separate product.
+	  This driver provides mouse pointer, left and right mouse buttons,
+	  and maps all the other remote buttons to keypress events.
+
+	  To compile this driver as a module, choose M here: the module will be
+	  called ati_remote2.
+
+config INPUT_KEYSPAN_REMOTE
+	tristate "Keyspan DMR USB remote control (EXPERIMENTAL)"
+	depends on EXPERIMENTAL
+	select USB
+	help
+	  Say Y here if you want to use a Keyspan DMR USB remote control.
+	  Currently only the UIA-11 type of receiver has been tested.  The tag
+	  on the receiver that connects to the USB port should have a P/N that
+	  will tell you what type of DMR you have.  The UIA-10 type is not
+	  supported at this time.  This driver maps all buttons to keypress
+	  events.
 
-	  If unsure, say Y.
+	  To compile this driver as a module, choose M here: the module will
+	  be called keyspan_remote.
+
+config INPUT_POWERMATE
+	tristate "Griffin PowerMate and Contour Jog support"
+	select USB
+	help
+	  Say Y here if you want to use Griffin PowerMate or Contour Jog devices.
+	  These are aluminum dials which can measure clockwise and anticlockwise
+	  rotation.  The dial also acts as a pushbutton.  The base contains an LED
+	  which can be instructed to pulse or to switch to a particular intensity.
+
+	  You can download userspace tools from
+	  <http://sowerbutts.com/powermate/>.
 
 	  To compile this driver as a module, choose M here: the
-	  module will be called ixp4xx-beeper.
+	  module will be called powermate.
+
+config INPUT_YEALINK
+	tristate "Yealink usb-p1k voip phone"
+	depends EXPERIMENTAL
+	select USB
+	help
+	  Say Y here if you want to enable keyboard and LCD functions of the
+	  Yealink usb-p1k usb phones. The audio part is enabled by the generic
+	  usb sound driver, so you might want to enable that as well.
+
+	  For information about how to use these additional functions, see
+	  <file:Documentation/input/yealink.txt>.
+
+	  To compile this driver as a module, choose M here: the module will be
+	  called yealink.
 
 config INPUT_UINPUT
 	tristate "User level driver support"
diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile
index 21e3cca0d33e..8b2f7799e25c 100644
--- a/drivers/input/misc/Makefile
+++ b/drivers/input/misc/Makefile
@@ -8,9 +8,14 @@ obj-$(CONFIG_INPUT_POLLDEV)		+= input-polldev.o
 obj-$(CONFIG_INPUT_SPARCSPKR)		+= sparcspkr.o
 obj-$(CONFIG_INPUT_PCSPKR)		+= pcspkr.o
 obj-$(CONFIG_INPUT_M68K_BEEP)		+= m68kspkr.o
-obj-$(CONFIG_INPUT_UINPUT)		+= uinput.o
+obj-$(CONFIG_INPUT_IXP4XX_BEEPER)	+= ixp4xx-beeper.o
 obj-$(CONFIG_INPUT_COBALT_BTNS)		+= cobalt_btns.o
 obj-$(CONFIG_INPUT_WISTRON_BTNS)	+= wistron_btns.o
 obj-$(CONFIG_INPUT_ATLAS_BTNS)		+= atlas_btns.o
+obj-$(CONFIG_INPUT_ATI_REMOTE)		+= ati_remote.o
+obj-$(CONFIG_INPUT_ATI_REMOTE2)		+= ati_remote2.o
+obj-$(CONFIG_INPUT_KEYSPAN_REMOTE)	+= keyspan_remote.o
+obj-$(CONFIG_INPUT_POWERMATE)		+= powermate.o
+obj-$(CONFIG_INPUT_YEALINK)		+= yealink.o
 obj-$(CONFIG_HP_SDC_RTC)		+= hp_sdc_rtc.o
-obj-$(CONFIG_INPUT_IXP4XX_BEEPER)	+= ixp4xx-beeper.o
+obj-$(CONFIG_INPUT_UINPUT)		+= uinput.o
diff --git a/drivers/usb/input/ati_remote.c b/drivers/input/misc/ati_remote.c
index 471aab206443..471aab206443 100644
--- a/drivers/usb/input/ati_remote.c
+++ b/drivers/input/misc/ati_remote.c
diff --git a/drivers/usb/input/ati_remote2.c b/drivers/input/misc/ati_remote2.c
index a9032aa3465f..1031543e5c3f 100644
--- a/drivers/usb/input/ati_remote2.c
+++ b/drivers/input/misc/ati_remote2.c
@@ -405,9 +405,7 @@ static void ati_remote2_urb_cleanup(struct ati_remote2 *ar2)
 
 	for (i = 0; i < 2; i++) {
 		usb_free_urb(ar2->urb[i]);
-
-		if (ar2->buf[i])
-			usb_buffer_free(ar2->udev, 4, ar2->buf[i], ar2->buf_dma[i]);
+		usb_buffer_free(ar2->udev, 4, ar2->buf[i], ar2->buf_dma[i]);
 	}
 }
 
diff --git a/drivers/usb/input/keyspan_remote.c b/drivers/input/misc/keyspan_remote.c
index 1bffc9fa98c2..1bffc9fa98c2 100644
--- a/drivers/usb/input/keyspan_remote.c
+++ b/drivers/input/misc/keyspan_remote.c
diff --git a/drivers/usb/input/map_to_7segment.h b/drivers/input/misc/map_to_7segment.h
index a424094d9fe2..a424094d9fe2 100644
--- a/drivers/usb/input/map_to_7segment.h
+++ b/drivers/input/misc/map_to_7segment.h
diff --git a/drivers/usb/input/powermate.c b/drivers/input/misc/powermate.c
index 4f93a760faee..448a470d28f2 100644
--- a/drivers/usb/input/powermate.c
+++ b/drivers/input/misc/powermate.c
@@ -291,12 +291,10 @@ static int powermate_alloc_buffers(struct usb_device *udev, struct powermate_dev
 
 static void powermate_free_buffers(struct usb_device *udev, struct powermate_device *pm)
 {
-	if (pm->data)
-		usb_buffer_free(udev, POWERMATE_PAYLOAD_SIZE_MAX,
-				pm->data, pm->data_dma);
-	if (pm->configcr)
-		usb_buffer_free(udev, sizeof(*(pm->configcr)),
-				pm->configcr, pm->configcr_dma);
+	usb_buffer_free(udev, POWERMATE_PAYLOAD_SIZE_MAX,
+			pm->data, pm->data_dma);
+	usb_buffer_free(udev, sizeof(*(pm->configcr)),
+			pm->configcr, pm->configcr_dma);
 }
 
 /* Called whenever a USB device matching one in our supported devices table is connected */
diff --git a/drivers/input/misc/uinput.c b/drivers/input/misc/uinput.c
index 031467eadd31..a56ad4ba8fe2 100644
--- a/drivers/input/misc/uinput.c
+++ b/drivers/input/misc/uinput.c
@@ -33,7 +33,6 @@
 #include <linux/slab.h>
 #include <linux/module.h>
 #include <linux/init.h>
-#include <linux/input.h>
 #include <linux/smp_lock.h>
 #include <linux/fs.h>
 #include <linux/miscdevice.h>
diff --git a/drivers/usb/input/yealink.c b/drivers/input/misc/yealink.c
index c54f1a5dcb4a..ab15880fd566 100644
--- a/drivers/usb/input/yealink.c
+++ b/drivers/input/misc/yealink.c
@@ -29,7 +29,7 @@
  * This driver is based on:
  *   - the usbb2k-api	http://savannah.nongnu.org/projects/usbb2k-api/
  *   - information from	http://memeteau.free.fr/usbb2k
- *   - the xpad-driver	drivers/usb/input/xpad.c
+ *   - the xpad-driver	drivers/input/joystick/xpad.c
  *
  * Thanks to:
  *   - Olivier Vandorpe, for providing the usbb2k-api.
@@ -818,18 +818,17 @@ static int usb_cleanup(struct yealink_dev *yld, int err)
 		else
 			input_unregister_device(yld->idev);
 	}
-	if (yld->ctl_req)
-		usb_buffer_free(yld->udev, sizeof(*(yld->ctl_req)),
-				yld->ctl_req, yld->ctl_req_dma);
-	if (yld->ctl_data)
-		usb_buffer_free(yld->udev, USB_PKT_LEN,
-				yld->ctl_data, yld->ctl_dma);
-	if (yld->irq_data)
-		usb_buffer_free(yld->udev, USB_PKT_LEN,
-				yld->irq_data, yld->irq_dma);
-
-	usb_free_urb(yld->urb_irq);	/* parameter validation in core/urb */
-	usb_free_urb(yld->urb_ctl);	/* parameter validation in core/urb */
+
+	usb_free_urb(yld->urb_irq);
+	usb_free_urb(yld->urb_ctl);
+
+	usb_buffer_free(yld->udev, sizeof(*(yld->ctl_req)),
+			yld->ctl_req, yld->ctl_req_dma);
+	usb_buffer_free(yld->udev, USB_PKT_LEN,
+			yld->ctl_data, yld->ctl_dma);
+	usb_buffer_free(yld->udev, USB_PKT_LEN,
+			yld->irq_data, yld->irq_dma);
+
 	kfree(yld);
 	return err;
 }
diff --git a/drivers/usb/input/yealink.h b/drivers/input/misc/yealink.h
index 48af0be9cbdf..48af0be9cbdf 100644
--- a/drivers/usb/input/yealink.h
+++ b/drivers/input/misc/yealink.h
diff --git a/drivers/input/mouse/Kconfig b/drivers/input/mouse/Kconfig
index 81dd8c7211a7..2ccc114b3ff6 100644
--- a/drivers/input/mouse/Kconfig
+++ b/drivers/input/mouse/Kconfig
@@ -2,7 +2,7 @@
 # Mouse driver configuration
 #
 menuconfig INPUT_MOUSE
-	bool "Mouse"
+	bool "Mice"
 	default y
 	help
 	  Say Y here, and a list of supported mice will be displayed.
@@ -19,7 +19,7 @@ config MOUSE_PS2
 	select SERIO_LIBPS2
 	select SERIO_I8042 if X86_PC
 	select SERIO_GSCPS2 if GSC
-	---help---
+	help
 	  Say Y here if you have a PS/2 mouse connected to your system. This
 	  includes the standard 2 or 3-button PS/2 mouse, as well as PS/2
 	  mice with wheels and extra buttons, Microsoft, Logitech or Genius
@@ -41,7 +41,7 @@ config MOUSE_PS2_ALPS
 	bool "ALPS PS/2 mouse protocol extension" if EMBEDDED
 	default y
 	depends on MOUSE_PS2
-	---help---
+	help
 	  Say Y here if you have an ALPS PS/2 touchpad connected to
 	  your system.
 
@@ -51,7 +51,7 @@ config MOUSE_PS2_LOGIPS2PP
 	bool "Logictech PS/2++ mouse protocol extension" if EMBEDDED
 	default y
 	depends on MOUSE_PS2
-	---help---
+	help
 	  Say Y here if you have a Logictech PS/2++ mouse connected to
 	  your system.
 
@@ -61,7 +61,7 @@ config MOUSE_PS2_SYNAPTICS
 	bool "Synaptics PS/2 mouse protocol extension" if EMBEDDED
 	default y
 	depends on MOUSE_PS2
-	---help---
+	help
 	  Say Y here if you have a Synaptics PS/2 TouchPad connected to
 	  your system.
 
@@ -71,7 +71,7 @@ config MOUSE_PS2_LIFEBOOK
 	bool "Fujitsu Lifebook PS/2 mouse protocol extension" if EMBEDDED
 	default y
 	depends on MOUSE_PS2
-	---help---
+	help
 	  Say Y here if you have a Fujitsu B-series Lifebook PS/2
 	  TouchScreen connected to your system.
 
@@ -81,7 +81,7 @@ config MOUSE_PS2_TRACKPOINT
 	bool "IBM Trackpoint PS/2 mouse protocol extension" if EMBEDDED
 	default y
 	depends on MOUSE_PS2
-	---help---
+	help
 	  Say Y here if you have an IBM Trackpoint PS/2 mouse connected
 	  to your system.
 
@@ -90,7 +90,7 @@ config MOUSE_PS2_TRACKPOINT
 config MOUSE_PS2_TOUCHKIT
 	bool "eGalax TouchKit PS/2 protocol extension"
 	depends on MOUSE_PS2
-	---help---
+	help
 	  Say Y here if you have an eGalax TouchKit PS/2 touchscreen
 	  connected to your system.
 
@@ -99,7 +99,7 @@ config MOUSE_PS2_TOUCHKIT
 config MOUSE_SERIAL
 	tristate "Serial mouse"
 	select SERIO
-	---help---
+	help
 	  Say Y here if you have a serial (RS-232, COM port) mouse connected
 	  to your system. This includes Sun, MouseSystems, Microsoft,
 	  Logitech and all other compatible serial mice.
@@ -109,6 +109,26 @@ config MOUSE_SERIAL
 	  To compile this driver as a module, choose M here: the
 	  module will be called sermouse.
 
+config MOUSE_APPLETOUCH
+	tristate "Apple USB Touchpad support"
+	select USB
+	help
+	  Say Y here if you want to use an Apple USB Touchpad.
+
+	  These are the touchpads that can be found on post-February 2005
+	  Apple Powerbooks (prior models have a Synaptics touchpad connected
+	  to the ADB bus).
+
+	  This driver provides a basic mouse driver but can be interfaced
+	  with the synaptics X11 driver to provide acceleration and
+	  scrolling in X11.
+
+	  For further information, see
+	  <file:Documentation/input/appletouch.txt>.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called appletouch.
+
 config MOUSE_INPORT
 	tristate "InPort/MS/ATIXL busmouse"
 	depends on ISA
diff --git a/drivers/input/mouse/Makefile b/drivers/input/mouse/Makefile
index 6a8f622927f2..aa4ba878533f 100644
--- a/drivers/input/mouse/Makefile
+++ b/drivers/input/mouse/Makefile
@@ -5,6 +5,7 @@
 # Each configuration option enables a list of files.
 
 obj-$(CONFIG_MOUSE_AMIGA)	+= amimouse.o
+obj-$(CONFIG_MOUSE_APPLETOUCH)	+= appletouch.o
 obj-$(CONFIG_MOUSE_ATARI)	+= atarimouse.o
 obj-$(CONFIG_MOUSE_RISCPC)	+= rpcmouse.o
 obj-$(CONFIG_MOUSE_INPORT)	+= inport.o
diff --git a/drivers/usb/input/appletouch.c b/drivers/input/mouse/appletouch.c
index e3215267db11..e3215267db11 100644
--- a/drivers/usb/input/appletouch.c
+++ b/drivers/input/mouse/appletouch.c
diff --git a/drivers/input/mouse/synaptics.c b/drivers/input/mouse/synaptics.c
index c77788bf932d..666ad3a53fdb 100644
--- a/drivers/input/mouse/synaptics.c
+++ b/drivers/input/mouse/synaptics.c
@@ -185,7 +185,7 @@ static int synaptics_query_hardware(struct psmouse *psmouse)
 	int retries = 0;
 
 	while ((retries++ < 3) && psmouse_reset(psmouse))
-		printk(KERN_ERR "synaptics reset failed\n");
+		/* empty */;
 
 	if (synaptics_identify(psmouse))
 		return -1;
diff --git a/drivers/input/serio/i8042.c b/drivers/input/serio/i8042.c
index 7c17377a65b9..3888dc307e0c 100644
--- a/drivers/input/serio/i8042.c
+++ b/drivers/input/serio/i8042.c
@@ -526,6 +526,33 @@ static irqreturn_t __devinit i8042_aux_test_irq(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
+/*
+ * i8042_toggle_aux - enables or disables AUX port on i8042 via command and
+ * verifies success by readinng CTR. Used when testing for presence of AUX
+ * port.
+ */
+static int __devinit i8042_toggle_aux(int on)
+{
+	unsigned char param;
+	int i;
+
+	if (i8042_command(&param,
+			on ? I8042_CMD_AUX_ENABLE : I8042_CMD_AUX_DISABLE))
+		return -1;
+
+	/* some chips need some time to set the I8042_CTR_AUXDIS bit */
+	for (i = 0; i < 100; i++) {
+		udelay(50);
+
+		if (i8042_command(&param, I8042_CMD_CTL_RCTR))
+			return -1;
+
+		if (!(param & I8042_CTR_AUXDIS) == on)
+			return 0;
+	}
+
+	return -1;
+}
 
 /*
  * i8042_check_aux() applies as much paranoia as it can at detecting
@@ -580,16 +607,12 @@ static int __devinit i8042_check_aux(void)
  * Bit assignment test - filters out PS/2 i8042's in AT mode
  */
 
-	if (i8042_command(&param, I8042_CMD_AUX_DISABLE))
-		return -1;
-	if (i8042_command(&param, I8042_CMD_CTL_RCTR) || (~param & I8042_CTR_AUXDIS)) {
+	if (i8042_toggle_aux(0)) {
 		printk(KERN_WARNING "Failed to disable AUX port, but continuing anyway... Is this a SiS?\n");
 		printk(KERN_WARNING "If AUX port is really absent please use the 'i8042.noaux' option.\n");
 	}
 
-	if (i8042_command(&param, I8042_CMD_AUX_ENABLE))
-		return -1;
-	if (i8042_command(&param, I8042_CMD_CTL_RCTR) || (param & I8042_CTR_AUXDIS))
+	if (i8042_toggle_aux(1))
 		return -1;
 
 /*
diff --git a/drivers/input/tablet/Kconfig b/drivers/input/tablet/Kconfig
new file mode 100644
index 000000000000..12dfb0eb3262
--- /dev/null
+++ b/drivers/input/tablet/Kconfig
@@ -0,0 +1,74 @@
+#
+# Tablet driver configuration
+#
+menuconfig INPUT_TABLET
+	bool "Tablets"
+	help
+	  Say Y here, and a list of supported tablets will be displayed.
+	  This option doesn't affect the kernel.
+
+	  If unsure, say Y.
+
+if INPUT_TABLET
+
+config TABLET_USB_ACECAD
+	tristate "Acecad Flair tablet support (USB)"
+	select USB
+	help
+	  Say Y here if you want to use the USB version of the Acecad Flair
+	  tablet.  Make sure to say Y to "Mouse support"
+	  (CONFIG_INPUT_MOUSEDEV) and/or "Event interface support"
+	  (CONFIG_INPUT_EVDEV) as well.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called acecad.
+
+config TABLET_USB_AIPTEK
+	tristate "Aiptek 6000U/8000U tablet support (USB)"
+	select USB
+	help
+	  Say Y here if you want to use the USB version of the Aiptek 6000U
+	  or Aiptek 8000U tablet.  Make sure to say Y to "Mouse support"
+	  (CONFIG_INPUT_MOUSEDEV) and/or "Event interface support"
+	  (CONFIG_INPUT_EVDEV) as well.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called aiptek.
+
+config TABLET_USB_GTCO
+        tristate "GTCO CalComp/InterWrite USB Support"
+        depends on USB && INPUT
+        help
+          Say Y here if you want to use the USB version of the GTCO
+          CalComp/InterWrite Tablet.  Make sure to say Y to "Mouse support"
+          (CONFIG_INPUT_MOUSEDEV) and/or "Event interface support"
+          (CONFIG_INPUT_EVDEV) as well.
+
+          To compile this driver as a module, choose M here: the
+          module will be called gtco.
+
+config TABLET_USB_KBTAB
+	tristate "KB Gear JamStudio tablet support (USB)"
+	select USB
+	help
+	  Say Y here if you want to use the USB version of the KB Gear
+	  JamStudio tablet.  Make sure to say Y to "Mouse support"
+	  (CONFIG_INPUT_MOUSEDEV) and/or "Event interface support"
+	  (CONFIG_INPUT_EVDEV) as well.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called kbtab.
+
+config TABLET_USB_WACOM
+	tristate "Wacom Intuos/Graphire tablet support (USB)"
+	select USB
+	help
+	  Say Y here if you want to use the USB version of the Wacom Intuos
+	  or Graphire tablet.  Make sure to say Y to "Mouse support"
+	  (CONFIG_INPUT_MOUSEDEV) and/or "Event interface support"
+	  (CONFIG_INPUT_EVDEV) as well.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called wacom.
+
+endif
diff --git a/drivers/input/tablet/Makefile b/drivers/input/tablet/Makefile
new file mode 100644
index 000000000000..ce8b9a9cfa40
--- /dev/null
+++ b/drivers/input/tablet/Makefile
@@ -0,0 +1,12 @@
+#
+# Makefile for the tablet drivers
+#
+
+# Multipart objects.
+wacom-objs	:= wacom_wac.o wacom_sys.o
+
+obj-$(CONFIG_TABLET_USB_ACECAD)	+= acecad.o
+obj-$(CONFIG_TABLET_USB_AIPTEK)	+= aiptek.o
+obj-$(CONFIG_TABLET_USB_GTCO)	+= gtco.o
+obj-$(CONFIG_TABLET_USB_KBTAB)	+= kbtab.o
+obj-$(CONFIG_TABLET_USB_WACOM)	+= wacom.o
diff --git a/drivers/usb/input/acecad.c b/drivers/input/tablet/acecad.c
index be8e9243c062..dd2310458c46 100644
--- a/drivers/usb/input/acecad.c
+++ b/drivers/input/tablet/acecad.c
@@ -54,7 +54,7 @@ struct usb_acecad {
 	struct input_dev *input;
 	struct urb *irq;
 
-	signed char *data;
+	unsigned char *data;
 	dma_addr_t data_dma;
 };
 
diff --git a/drivers/usb/input/aiptek.c b/drivers/input/tablet/aiptek.c
index cc0a498763d8..cc0a498763d8 100644
--- a/drivers/usb/input/aiptek.c
+++ b/drivers/input/tablet/aiptek.c
diff --git a/drivers/usb/input/gtco.c b/drivers/input/tablet/gtco.c
index b2ca10f2fe0e..b2ca10f2fe0e 100644
--- a/drivers/usb/input/gtco.c
+++ b/drivers/input/tablet/gtco.c
diff --git a/drivers/usb/input/kbtab.c b/drivers/input/tablet/kbtab.c
index c4781b9d1297..91e6d00d4a43 100644
--- a/drivers/usb/input/kbtab.c
+++ b/drivers/input/tablet/kbtab.c
@@ -29,7 +29,7 @@ module_param(kb_pressure_click, int, 0);
 MODULE_PARM_DESC(kb_pressure_click, "pressure threshold for clicks");
 
 struct kbtab {
-	signed char *data;
+	unsigned char *data;
 	dma_addr_t data_dma;
 	struct input_dev *dev;
 	struct usb_device *usbdev;
diff --git a/drivers/usb/input/wacom.h b/drivers/input/tablet/wacom.h
index d85abfc5ab58..ef01a807ec0f 100644
--- a/drivers/usb/input/wacom.h
+++ b/drivers/input/tablet/wacom.h
@@ -1,5 +1,5 @@
 /*
- * drivers/usb/input/wacom.h
+ * drivers/input/tablet/wacom.h
  *
  *  USB Wacom Graphire and Wacom Intuos tablet support
  *
diff --git a/drivers/usb/input/wacom_sys.c b/drivers/input/tablet/wacom_sys.c
index 1fe48208c2f4..83bddef66067 100644
--- a/drivers/usb/input/wacom_sys.c
+++ b/drivers/input/tablet/wacom_sys.c
@@ -1,5 +1,5 @@
 /*
- * drivers/usb/input/wacom_sys.c
+ * drivers/input/tablet/wacom_sys.c
  *
  *  USB Wacom Graphire and Wacom Intuos tablet support - system specific code
  */
diff --git a/drivers/usb/input/wacom_wac.c b/drivers/input/tablet/wacom_wac.c
index 4f3e9bc7177d..7661f03a2db2 100644
--- a/drivers/usb/input/wacom_wac.c
+++ b/drivers/input/tablet/wacom_wac.c
@@ -1,5 +1,5 @@
 /*
- * drivers/usb/input/wacom_wac.c
+ * drivers/input/tablet/wacom_wac.c
  *
  *  USB Wacom Graphire and Wacom Intuos tablet support - Wacom specific code
  *
diff --git a/drivers/usb/input/wacom_wac.h b/drivers/input/tablet/wacom_wac.h
index a23022287248..a5e12e8756de 100644
--- a/drivers/usb/input/wacom_wac.h
+++ b/drivers/input/tablet/wacom_wac.h
@@ -1,5 +1,5 @@
 /*
- * drivers/usb/input/wacom_wac.h
+ * drivers/input/tablet/wacom_wac.h
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -39,7 +39,7 @@ struct wacom_features {
 };
 
 struct wacom_wac {
-	signed char *data;
+	unsigned char *data;
         int tool[2];
         int id[2];
         __u32 serial[2];
diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig
index 971618059a6f..5e640aeb03cd 100644
--- a/drivers/input/touchscreen/Kconfig
+++ b/drivers/input/touchscreen/Kconfig
@@ -1,5 +1,5 @@
 #
-# Mouse driver configuration
+# Touchscreen driver configuration
 #
 menuconfig INPUT_TOUCHSCREEN
 	bool "Touchscreens"
@@ -44,9 +44,9 @@ config TOUCHSCREEN_BITSY
 config TOUCHSCREEN_CORGI
 	tristate "SharpSL (Corgi and Spitz series) touchscreen driver"
 	depends on PXA_SHARPSL
-	default y	
+	default y
 	help
-	  Say Y here to enable the driver for the touchscreen on the 
+	  Say Y here to enable the driver for the touchscreen on the
 	  Sharp SL-C7xx and SL-Cxx00 series of PDAs.
 
 	  If unsure, say N.
@@ -164,4 +164,58 @@ config TOUCHSCREEN_UCB1400
 	  To compile this driver as a module, choose M here: the
 	  module will be called ucb1400_ts.
 
+config TOUCHSCREEN_USB_COMPOSITE
+	tristate "USB Touchscreen Driver"
+	select USB
+	help
+	  USB Touchscreen driver for:
+	  - eGalax Touchkit USB (also includes eTurboTouch CT-410/510/700)
+	  - PanJit TouchSet USB
+	  - 3M MicroTouch USB (EX II series)
+	  - ITM
+	  - some other eTurboTouch
+	  - Gunze AHL61
+	  - DMC TSC-10/25
+
+	  Have a look at <http://linux.chapter7.ch/touchkit/> for
+	  a usage description and the required user-space stuff.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called usbtouchscreen.
+
+config TOUCHSCREEN_USB_EGALAX
+	default y
+	bool "eGalax, eTurboTouch CT-410/510/700 device support" if EMBEDDED
+	depends on TOUCHSCREEN_USB_COMPOSITE
+
+config TOUCHSCREEN_USB_PANJIT
+	default y
+	bool "PanJit device support" if EMBEDDED
+	depends on TOUCHSCREEN_USB_COMPOSITE
+
+config TOUCHSCREEN_USB_3M
+	default y
+	bool "3M/Microtouch EX II series device support" if EMBEDDED
+	depends on TOUCHSCREEN_USB_COMPOSITE
+
+config TOUCHSCREEN_USB_ITM
+	default y
+	bool "ITM device support" if EMBEDDED
+	depends on TOUCHSCREEN_USB_COMPOSITE
+
+config TOUCHSCREEN_USB_ETURBO
+	default y
+	bool "eTurboTouch (non-eGalax compatible) device support" if EMBEDDED
+	depends on TOUCHSCREEN_USB_COMPOSITE
+
+config TOUCHSCREEN_USB_GUNZE
+	default y
+	bool "Gunze AHL61 device support" if EMBEDDED
+	depends on TOUCHSCREEN_USB_COMPOSITE
+
+config TOUCHSCREEN_USB_DMC_TSC10
+	default y
+	bool "DMC TSC-10/25 device support" if EMBEDDED
+	depends on TOUCHSCREEN_USB_COMPOSITE
+
 endif
diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile
index 30e6e2217a15..2f86d6ad06d3 100644
--- a/drivers/input/touchscreen/Makefile
+++ b/drivers/input/touchscreen/Makefile
@@ -1,17 +1,18 @@
 #
-# Makefile for the mouse drivers.
+# Makefile for the touchscreen drivers.
 #
 
 # Each configuration option enables a list of files.
 
 obj-$(CONFIG_TOUCHSCREEN_ADS7846)	+= ads7846.o
-obj-$(CONFIG_TOUCHSCREEN_BITSY)	+= h3600_ts_input.o
-obj-$(CONFIG_TOUCHSCREEN_CORGI)	+= corgi_ts.o
-obj-$(CONFIG_TOUCHSCREEN_GUNZE)	+= gunze.o
-obj-$(CONFIG_TOUCHSCREEN_ELO)	+= elo.o
-obj-$(CONFIG_TOUCHSCREEN_MTOUCH) += mtouch.o
-obj-$(CONFIG_TOUCHSCREEN_MK712)	+= mk712.o
-obj-$(CONFIG_TOUCHSCREEN_HP600)	+= hp680_ts_input.o
+obj-$(CONFIG_TOUCHSCREEN_BITSY)		+= h3600_ts_input.o
+obj-$(CONFIG_TOUCHSCREEN_CORGI)		+= corgi_ts.o
+obj-$(CONFIG_TOUCHSCREEN_GUNZE)		+= gunze.o
+obj-$(CONFIG_TOUCHSCREEN_ELO)		+= elo.o
+obj-$(CONFIG_TOUCHSCREEN_MTOUCH)	+= mtouch.o
+obj-$(CONFIG_TOUCHSCREEN_MK712)		+= mk712.o
+obj-$(CONFIG_TOUCHSCREEN_HP600)		+= hp680_ts_input.o
+obj-$(CONFIG_TOUCHSCREEN_USB_COMPOSITE)	+= usbtouchscreen.o
 obj-$(CONFIG_TOUCHSCREEN_PENMOUNT)	+= penmount.o
 obj-$(CONFIG_TOUCHSCREEN_TOUCHRIGHT)	+= touchright.o
 obj-$(CONFIG_TOUCHSCREEN_TOUCHWIN)	+= touchwin.o
diff --git a/drivers/usb/input/usbtouchscreen.c b/drivers/input/touchscreen/usbtouchscreen.c
index e0829413336b..8e18e6c64777 100644
--- a/drivers/usb/input/usbtouchscreen.c
+++ b/drivers/input/touchscreen/usbtouchscreen.c
@@ -668,9 +668,8 @@ static void usbtouch_close(struct input_dev *input)
 static void usbtouch_free_buffers(struct usb_device *udev,
 				  struct usbtouch_usb *usbtouch)
 {
-	if (usbtouch->data)
-		usb_buffer_free(udev, usbtouch->type->rept_size,
-		                usbtouch->data, usbtouch->data_dma);
+	usb_buffer_free(udev, usbtouch->type->rept_size,
+	                usbtouch->data, usbtouch->data_dma);
 	kfree(usbtouch->buffer);
 }
 
diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig
index 9980a4ddfed9..b847bbc8b0e1 100644
--- a/drivers/usb/Kconfig
+++ b/drivers/usb/Kconfig
@@ -85,8 +85,6 @@ source "drivers/usb/class/Kconfig"
 
 source "drivers/usb/storage/Kconfig"
 
-source "drivers/usb/input/Kconfig"
-
 source "drivers/usb/image/Kconfig"
 
 source "drivers/usb/net/Kconfig"
diff --git a/drivers/usb/Makefile b/drivers/usb/Makefile
index f5de58a63f2b..0ef090b1b37c 100644
--- a/drivers/usb/Makefile
+++ b/drivers/usb/Makefile
@@ -23,15 +23,6 @@ obj-$(CONFIG_USB_PRINTER)	+= class/
 obj-$(CONFIG_USB_STORAGE)	+= storage/
 obj-$(CONFIG_USB)		+= storage/
 
-obj-$(CONFIG_USB_ACECAD)	+= input/
-obj-$(CONFIG_USB_AIPTEK)	+= input/
-obj-$(CONFIG_USB_ATI_REMOTE)	+= input/
-obj-$(CONFIG_USB_KBTAB)		+= input/
-obj-$(CONFIG_USB_MTOUCH)	+= input/
-obj-$(CONFIG_USB_POWERMATE)	+= input/
-obj-$(CONFIG_USB_WACOM)		+= input/
-obj-$(CONFIG_USB_XPAD)		+= input/
-
 obj-$(CONFIG_USB_CATC)		+= net/
 obj-$(CONFIG_USB_KAWETH)	+= net/
 obj-$(CONFIG_USB_PEGASUS)	+= net/
diff --git a/drivers/usb/input/Kconfig b/drivers/usb/input/Kconfig
deleted file mode 100644
index a792e42f58af..000000000000
--- a/drivers/usb/input/Kconfig
+++ /dev/null
@@ -1,225 +0,0 @@
-#
-# USB Input driver configuration
-#
-comment "USB Input Devices"
-	depends on USB
-
-config USB_AIPTEK
-	tristate "Aiptek 6000U/8000U tablet support"
-	depends on USB && INPUT
-	help
-	  Say Y here if you want to use the USB version of the Aiptek 6000U
-	  or Aiptek 8000U tablet.  Make sure to say Y to "Mouse support"
-	  (CONFIG_INPUT_MOUSEDEV) and/or "Event interface support"
-	  (CONFIG_INPUT_EVDEV) as well.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called aiptek.
-
-config USB_WACOM
-	tristate "Wacom Intuos/Graphire tablet support"
-	depends on USB && INPUT
-	help
-	  Say Y here if you want to use the USB version of the Wacom Intuos
-	  or Graphire tablet.  Make sure to say Y to "Mouse support"
-	  (CONFIG_INPUT_MOUSEDEV) and/or "Event interface support"
-	  (CONFIG_INPUT_EVDEV) as well.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called wacom.
-
-config USB_ACECAD
-	tristate "Acecad Flair tablet support"
-	depends on USB && INPUT
-	help
-	  Say Y here if you want to use the USB version of the Acecad Flair
-	  tablet.  Make sure to say Y to "Mouse support"
-	  (CONFIG_INPUT_MOUSEDEV) and/or "Event interface support"
-	  (CONFIG_INPUT_EVDEV) as well.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called acecad.
-
-config USB_KBTAB
-	tristate "KB Gear JamStudio tablet support"
-	depends on USB && INPUT
-	help
-	  Say Y here if you want to use the USB version of the KB Gear
-	  JamStudio tablet.  Make sure to say Y to "Mouse support"
-	  (CONFIG_INPUT_MOUSEDEV) and/or "Event interface support"
-	  (CONFIG_INPUT_EVDEV) as well.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called kbtab.
-
-config USB_POWERMATE
-	tristate "Griffin PowerMate and Contour Jog support"
-	depends on USB && INPUT
-	---help---
-	  Say Y here if you want to use Griffin PowerMate or Contour Jog devices.
-	  These are aluminum dials which can measure clockwise and anticlockwise
-	  rotation.  The dial also acts as a pushbutton.  The base contains an LED
-	  which can be instructed to pulse or to switch to a particular intensity.
-
-	  You can download userspace tools from
-	  <http://sowerbutts.com/powermate/>.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called powermate.
-
-config USB_TOUCHSCREEN
-	tristate "USB Touchscreen Driver"
-	depends on USB && INPUT
-	---help---
-	  USB Touchscreen driver for:
-	  - eGalax Touchkit USB (also includes eTurboTouch CT-410/510/700)
-	  - PanJit TouchSet USB
-	  - 3M MicroTouch USB (EX II series)
-	  - ITM
-	  - some other eTurboTouch
-	  - Gunze AHL61
-	  - DMC TSC-10/25
-
-	  Have a look at <http://linux.chapter7.ch/touchkit/> for
-	  a usage description and the required user-space stuff.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called usbtouchscreen.
-
-config USB_TOUCHSCREEN_EGALAX
-	default y
-	bool "eGalax, eTurboTouch CT-410/510/700 device support" if EMBEDDED
-	depends on USB_TOUCHSCREEN
-
-config USB_TOUCHSCREEN_PANJIT
-	default y
-	bool "PanJit device support" if EMBEDDED
-	depends on USB_TOUCHSCREEN
-
-config USB_TOUCHSCREEN_3M
-	default y
-	bool "3M/Microtouch EX II series device support" if EMBEDDED
-	depends on USB_TOUCHSCREEN
-
-config USB_TOUCHSCREEN_ITM
-	default y
-	bool "ITM device support" if EMBEDDED
-	depends on USB_TOUCHSCREEN
-
-config USB_TOUCHSCREEN_ETURBO
-	default y
-	bool "eTurboTouch (non-eGalax compatible) device support" if EMBEDDED
-	depends on USB_TOUCHSCREEN
-
-config USB_TOUCHSCREEN_GUNZE
-	default y
-	bool "Gunze AHL61 device support" if EMBEDDED
-	depends on USB_TOUCHSCREEN
-
-config USB_TOUCHSCREEN_DMC_TSC10
-	default y
-	bool "DMC TSC-10/25 device support" if EMBEDDED
-	depends on USB_TOUCHSCREEN
-
-config USB_YEALINK
-	tristate "Yealink usb-p1k voip phone"
-	depends on USB && INPUT && EXPERIMENTAL
-	---help---
-	  Say Y here if you want to enable keyboard and LCD functions of the
-	  Yealink usb-p1k usb phones. The audio part is enabled by the generic
-	  usb sound driver, so you might want to enable that as well.
-
-	  For information about how to use these additional functions, see
-	  <file:Documentation/input/yealink.txt>.
-
-	  To compile this driver as a module, choose M here: the module will be
-	  called yealink.
-
-config USB_XPAD
-	tristate "X-Box gamepad support"
-	depends on USB && INPUT
-	---help---
-	  Say Y here if you want to use the X-Box pad with your computer.
-	  Make sure to say Y to "Joystick support" (CONFIG_INPUT_JOYDEV)
-	  and/or "Event interface support" (CONFIG_INPUT_EVDEV) as well.
-
-	  For information about how to connect the X-Box pad to USB, see
-	  <file:Documentation/input/xpad.txt>.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called xpad.
-	  
-config USB_ATI_REMOTE
-	tristate "ATI / X10 USB RF remote control"
-	depends on USB && INPUT
-	---help---
-	  Say Y here if you want to use an ATI or X10 "Lola" USB remote control.
-	  These are RF remotes with USB receivers. 
-	  The ATI remote comes with many of ATI's All-In-Wonder video cards.
-	  The X10 "Lola" remote is available at:
-	     <http://www.x10.com/products/lola_sg1.htm>
-	  This driver provides mouse pointer, left and right mouse buttons, 
-	  and maps all the other remote buttons to keypress events.
-	  
-	  To compile this driver as a module, choose M here: the module will be
-	  called ati_remote.
-
-config USB_ATI_REMOTE2
-	tristate "ATI / Philips USB RF remote control"
-	depends on USB && INPUT
-	---help---
-	  Say Y here if you want to use an ATI or Philips USB RF remote control.
-	  These are RF remotes with USB receivers.
-	  ATI Remote Wonder II comes with some ATI's All-In-Wonder video cards
-	  and is also available as a separate product.
-	  This driver provides mouse pointer, left and right mouse buttons,
-	  and maps all the other remote buttons to keypress events.
-
-	  To compile this driver as a module, choose M here: the module will be
-	  called ati_remote2.
-
-config USB_KEYSPAN_REMOTE
-	tristate "Keyspan DMR USB remote control (EXPERIMENTAL)"
-	depends on USB && INPUT && EXPERIMENTAL
-	---help---
-	  Say Y here if you want to use a Keyspan DMR USB remote control.
-	  Currently only the UIA-11 type of receiver has been tested.  The tag
-	  on the receiver that connects to the USB port should have a P/N that
-	  will tell you what type of DMR you have.  The UIA-10 type is not
-	  supported at this time.  This driver maps all buttons to keypress
-	  events.
-
-	  To compile this driver as a module, choose M here: the module will
-	  be called keyspan_remote.
-
-config USB_APPLETOUCH
-	tristate "Apple USB Touchpad support"
-	depends on USB && INPUT
-	---help---
-	  Say Y here if you want to use an Apple USB Touchpad.
-
-	  These are the touchpads that can be found on post-February 2005
-	  Apple Powerbooks (prior models have a Synaptics touchpad connected
-	  to the ADB bus).
-
-	  This driver provides a basic mouse driver but can be interfaced
-	  with the synaptics X11 driver to provide acceleration and
-	  scrolling in X11.
-
-	  For further information, see
-	  <file:Documentation/input/appletouch.txt>.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called appletouch.
-
-config USB_GTCO
-        tristate "GTCO CalComp/InterWrite USB Support"
-        depends on USB && INPUT
-        ---help---
-          Say Y here if you want to use the USB version of the GTCO
-          CalComp/InterWrite Tablet.  Make sure to say Y to "Mouse support"
-          (CONFIG_INPUT_MOUSEDEV) and/or "Event interface support"
-          (CONFIG_INPUT_EVDEV) as well.
-
-          To compile this driver as a module, choose M here: the
-          module will be called gtco.
diff --git a/drivers/usb/input/Makefile b/drivers/usb/input/Makefile
deleted file mode 100644
index 284a0734e0cd..000000000000
--- a/drivers/usb/input/Makefile
+++ /dev/null
@@ -1,24 +0,0 @@
-#
-# Makefile for the USB input drivers
-#
-
-# Multipart objects.
-wacom-objs	:= wacom_wac.o wacom_sys.o
-
-obj-$(CONFIG_USB_AIPTEK)	+= aiptek.o
-obj-$(CONFIG_USB_ATI_REMOTE)	+= ati_remote.o
-obj-$(CONFIG_USB_ATI_REMOTE2)	+= ati_remote2.o
-obj-$(CONFIG_USB_KBTAB)		+= kbtab.o
-obj-$(CONFIG_USB_KEYSPAN_REMOTE)	+= keyspan_remote.o
-obj-$(CONFIG_USB_TOUCHSCREEN)	+= usbtouchscreen.o
-obj-$(CONFIG_USB_POWERMATE)	+= powermate.o
-obj-$(CONFIG_USB_WACOM)		+= wacom.o
-obj-$(CONFIG_USB_ACECAD)	+= acecad.o
-obj-$(CONFIG_USB_YEALINK)	+= yealink.o
-obj-$(CONFIG_USB_XPAD)		+= xpad.o
-obj-$(CONFIG_USB_APPLETOUCH)	+= appletouch.o
-obj-$(CONFIG_USB_GTCO)		+= gtco.o
-
-ifeq ($(CONFIG_USB_DEBUG),y)
-EXTRA_CFLAGS += -DDEBUG
-endif
diff --git a/include/linux/uinput.h b/include/linux/uinput.h
index 1fd61eeed664..a6c1e8eed226 100644
--- a/include/linux/uinput.h
+++ b/include/linux/uinput.h
@@ -32,6 +32,8 @@
  *		- first public version
  */
 
+#include <linux/input.h>
+
 #define UINPUT_VERSION		3
 
 #ifdef __KERNEL__