summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2015-01-17 08:15:49 +1300
committerLinus Torvalds <torvalds@linux-foundation.org>2015-01-17 08:15:49 +1300
commit7b78de8cb9c095c6d85eefa1bd1b350a3cfe67d0 (patch)
tree2db9494d399b472c4cc996268c6204eb2ebf06c2
parent937102fede1ad4943a3c3559b28468713370d7f9 (diff)
parent31ec77aca72ee5920ed3ec3d047734dc0bc43342 (diff)
downloadlinux-7b78de8cb9c095c6d85eefa1bd1b350a3cfe67d0.tar.bz2
Merge tag 'tty-3.19-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial driver fixes from Greg KH: "Here are some tty and serial driver fixes for 3.19-rc5 that resolve some reported issues, and add a new device id to the 8250 serial port driver. All have been in linux-next with no reported problems" * tag 'tty-3.19-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: serial: samsung: Add the support for Exynos5433 SoC Revert "tty: Fix pty master poll() after slave closes v2" tty: Prevent hw state corruption in exclusive mode reopen tty: Add support for the WCH384 4S multi-IO card serial: fix parisc boot hang
-rw-r--r--drivers/tty/n_tty.c9
-rw-r--r--drivers/tty/serial/8250/8250_pci.c29
-rw-r--r--drivers/tty/serial/samsung.c56
-rw-r--r--drivers/tty/serial/serial_core.c4
-rw-r--r--drivers/tty/tty_io.c7
5 files changed, 70 insertions, 35 deletions
diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c
index d2b496750d59..4ddfa60c9222 100644
--- a/drivers/tty/n_tty.c
+++ b/drivers/tty/n_tty.c
@@ -2399,17 +2399,12 @@ static unsigned int n_tty_poll(struct tty_struct *tty, struct file *file,
poll_wait(file, &tty->read_wait, wait);
poll_wait(file, &tty->write_wait, wait);
- if (test_bit(TTY_OTHER_CLOSED, &tty->flags))
- mask |= POLLHUP;
if (input_available_p(tty, 1))
mask |= POLLIN | POLLRDNORM;
- else if (mask & POLLHUP) {
- tty_flush_to_ldisc(tty);
- if (input_available_p(tty, 1))
- mask |= POLLIN | POLLRDNORM;
- }
if (tty->packet && tty->link->ctrl_status)
mask |= POLLPRI | POLLIN | POLLRDNORM;
+ if (test_bit(TTY_OTHER_CLOSED, &tty->flags))
+ mask |= POLLHUP;
if (tty_hung_up_p(file))
mask |= POLLHUP;
if (!(mask & (POLLHUP | POLLIN | POLLRDNORM))) {
diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c
index 31feeb2d0a66..d1f8dc6aabcb 100644
--- a/drivers/tty/serial/8250/8250_pci.c
+++ b/drivers/tty/serial/8250/8250_pci.c
@@ -1815,7 +1815,7 @@ pci_wch_ch353_setup(struct serial_private *priv,
}
static int
-pci_wch_ch382_setup(struct serial_private *priv,
+pci_wch_ch38x_setup(struct serial_private *priv,
const struct pciserial_board *board,
struct uart_8250_port *port, int idx)
{
@@ -1880,6 +1880,7 @@ pci_wch_ch382_setup(struct serial_private *priv,
#define PCIE_VENDOR_ID_WCH 0x1c00
#define PCIE_DEVICE_ID_WCH_CH382_2S1P 0x3250
+#define PCIE_DEVICE_ID_WCH_CH384_4S 0x3470
/* Unknown vendors/cards - this should not be in linux/pci_ids.h */
#define PCI_SUBDEVICE_ID_UNKNOWN_0x1584 0x1584
@@ -2571,13 +2572,21 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = {
.subdevice = PCI_ANY_ID,
.setup = pci_wch_ch353_setup,
},
- /* WCH CH382 2S1P card (16750 clone) */
+ /* WCH CH382 2S1P card (16850 clone) */
{
.vendor = PCIE_VENDOR_ID_WCH,
.device = PCIE_DEVICE_ID_WCH_CH382_2S1P,
.subvendor = PCI_ANY_ID,
.subdevice = PCI_ANY_ID,
- .setup = pci_wch_ch382_setup,
+ .setup = pci_wch_ch38x_setup,
+ },
+ /* WCH CH384 4S card (16850 clone) */
+ {
+ .vendor = PCIE_VENDOR_ID_WCH,
+ .device = PCIE_DEVICE_ID_WCH_CH384_4S,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .setup = pci_wch_ch38x_setup,
},
/*
* ASIX devices with FIFO bug
@@ -2876,6 +2885,7 @@ enum pci_board_num_t {
pbn_fintek_4,
pbn_fintek_8,
pbn_fintek_12,
+ pbn_wch384_4,
};
/*
@@ -3675,6 +3685,14 @@ static struct pciserial_board pci_boards[] = {
.base_baud = 115200,
.first_offset = 0x40,
},
+
+ [pbn_wch384_4] = {
+ .flags = FL_BASE0,
+ .num_ports = 4,
+ .base_baud = 115200,
+ .uart_offset = 8,
+ .first_offset = 0xC0,
+ },
};
static const struct pci_device_id blacklist[] = {
@@ -3687,6 +3705,7 @@ static const struct pci_device_id blacklist[] = {
{ PCI_DEVICE(0x4348, 0x7053), }, /* WCH CH353 2S1P */
{ PCI_DEVICE(0x4348, 0x5053), }, /* WCH CH353 1S1P */
{ PCI_DEVICE(0x1c00, 0x3250), }, /* WCH CH382 2S1P */
+ { PCI_DEVICE(0x1c00, 0x3470), }, /* WCH CH384 4S */
};
/*
@@ -5400,6 +5419,10 @@ static struct pci_device_id serial_pci_tbl[] = {
PCI_ANY_ID, PCI_ANY_ID,
0, 0, pbn_b0_bt_2_115200 },
+ { PCIE_VENDOR_ID_WCH, PCIE_DEVICE_ID_WCH_CH384_4S,
+ PCI_ANY_ID, PCI_ANY_ID,
+ 0, 0, pbn_wch384_4 },
+
/*
* Commtech, Inc. Fastcom adapters
*/
diff --git a/drivers/tty/serial/samsung.c b/drivers/tty/serial/samsung.c
index 19273e31d224..107e80722575 100644
--- a/drivers/tty/serial/samsung.c
+++ b/drivers/tty/serial/samsung.c
@@ -1757,32 +1757,43 @@ static struct s3c24xx_serial_drv_data s5pv210_serial_drv_data = {
#endif
#if defined(CONFIG_ARCH_EXYNOS)
+#define EXYNOS_COMMON_SERIAL_DRV_DATA \
+ .info = &(struct s3c24xx_uart_info) { \
+ .name = "Samsung Exynos UART", \
+ .type = PORT_S3C6400, \
+ .has_divslot = 1, \
+ .rx_fifomask = S5PV210_UFSTAT_RXMASK, \
+ .rx_fifoshift = S5PV210_UFSTAT_RXSHIFT, \
+ .rx_fifofull = S5PV210_UFSTAT_RXFULL, \
+ .tx_fifofull = S5PV210_UFSTAT_TXFULL, \
+ .tx_fifomask = S5PV210_UFSTAT_TXMASK, \
+ .tx_fifoshift = S5PV210_UFSTAT_TXSHIFT, \
+ .def_clk_sel = S3C2410_UCON_CLKSEL0, \
+ .num_clks = 1, \
+ .clksel_mask = 0, \
+ .clksel_shift = 0, \
+ }, \
+ .def_cfg = &(struct s3c2410_uartcfg) { \
+ .ucon = S5PV210_UCON_DEFAULT, \
+ .ufcon = S5PV210_UFCON_DEFAULT, \
+ .has_fracval = 1, \
+ } \
+
static struct s3c24xx_serial_drv_data exynos4210_serial_drv_data = {
- .info = &(struct s3c24xx_uart_info) {
- .name = "Samsung Exynos4 UART",
- .type = PORT_S3C6400,
- .has_divslot = 1,
- .rx_fifomask = S5PV210_UFSTAT_RXMASK,
- .rx_fifoshift = S5PV210_UFSTAT_RXSHIFT,
- .rx_fifofull = S5PV210_UFSTAT_RXFULL,
- .tx_fifofull = S5PV210_UFSTAT_TXFULL,
- .tx_fifomask = S5PV210_UFSTAT_TXMASK,
- .tx_fifoshift = S5PV210_UFSTAT_TXSHIFT,
- .def_clk_sel = S3C2410_UCON_CLKSEL0,
- .num_clks = 1,
- .clksel_mask = 0,
- .clksel_shift = 0,
- },
- .def_cfg = &(struct s3c2410_uartcfg) {
- .ucon = S5PV210_UCON_DEFAULT,
- .ufcon = S5PV210_UFCON_DEFAULT,
- .has_fracval = 1,
- },
+ EXYNOS_COMMON_SERIAL_DRV_DATA,
.fifosize = { 256, 64, 16, 16 },
};
+
+static struct s3c24xx_serial_drv_data exynos5433_serial_drv_data = {
+ EXYNOS_COMMON_SERIAL_DRV_DATA,
+ .fifosize = { 64, 256, 16, 256 },
+};
+
#define EXYNOS4210_SERIAL_DRV_DATA ((kernel_ulong_t)&exynos4210_serial_drv_data)
+#define EXYNOS5433_SERIAL_DRV_DATA ((kernel_ulong_t)&exynos5433_serial_drv_data)
#else
#define EXYNOS4210_SERIAL_DRV_DATA (kernel_ulong_t)NULL
+#define EXYNOS5433_SERIAL_DRV_DATA (kernel_ulong_t)NULL
#endif
static struct platform_device_id s3c24xx_serial_driver_ids[] = {
@@ -1804,6 +1815,9 @@ static struct platform_device_id s3c24xx_serial_driver_ids[] = {
}, {
.name = "exynos4210-uart",
.driver_data = EXYNOS4210_SERIAL_DRV_DATA,
+ }, {
+ .name = "exynos5433-uart",
+ .driver_data = EXYNOS5433_SERIAL_DRV_DATA,
},
{ },
};
@@ -1823,6 +1837,8 @@ static const struct of_device_id s3c24xx_uart_dt_match[] = {
.data = (void *)S5PV210_SERIAL_DRV_DATA },
{ .compatible = "samsung,exynos4210-uart",
.data = (void *)EXYNOS4210_SERIAL_DRV_DATA },
+ { .compatible = "samsung,exynos5433-uart",
+ .data = (void *)EXYNOS5433_SERIAL_DRV_DATA },
{},
};
MODULE_DEVICE_TABLE(of, s3c24xx_uart_dt_match);
diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c
index 57ca61b14670..984605bb5bf1 100644
--- a/drivers/tty/serial/serial_core.c
+++ b/drivers/tty/serial/serial_core.c
@@ -2164,7 +2164,9 @@ uart_report_port(struct uart_driver *drv, struct uart_port *port)
break;
}
- dev_info(port->dev, "%s%d at %s (irq = %d, base_baud = %d) is a %s\n",
+ printk(KERN_INFO "%s%s%s%d at %s (irq = %d, base_baud = %d) is a %s\n",
+ port->dev ? dev_name(port->dev) : "",
+ port->dev ? ": " : "",
drv->dev_name,
drv->tty_driver->name_base + port->line,
address, port->irq, port->uartclk / 16, uart_type(port));
diff --git a/drivers/tty/tty_io.c b/drivers/tty/tty_io.c
index 4f35b43e2475..51f066aa375e 100644
--- a/drivers/tty/tty_io.c
+++ b/drivers/tty/tty_io.c
@@ -1464,6 +1464,9 @@ static int tty_reopen(struct tty_struct *tty)
driver->subtype == PTY_TYPE_MASTER)
return -EIO;
+ if (test_bit(TTY_EXCLUSIVE, &tty->flags) && !capable(CAP_SYS_ADMIN))
+ return -EBUSY;
+
tty->count++;
WARN_ON(!tty->ldisc);
@@ -2106,10 +2109,6 @@ retry_open:
retval = -ENODEV;
filp->f_flags = saved_flags;
- if (!retval && test_bit(TTY_EXCLUSIVE, &tty->flags) &&
- !capable(CAP_SYS_ADMIN))
- retval = -EBUSY;
-
if (retval) {
#ifdef TTY_DEBUG_HANGUP
printk(KERN_DEBUG "%s: error %d in opening %s...\n", __func__,