summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2013-12-04 08:56:18 -0800
committerLinus Torvalds <torvalds@linux-foundation.org>2013-12-04 08:56:18 -0800
commit36059ee2bad1e08906fd8eed286a50ba6fad643d (patch)
tree41b07e13c86cf09f208e7d66ace64fb17459945a
parent8aa9c36788ee5ebf7a1377742d577911bfc9cfe7 (diff)
parenta5c6e87a7b224bdbf57875a9da8f340f5a6abc5a (diff)
downloadlinux-36059ee2bad1e08906fd8eed286a50ba6fad643d.tar.bz2
Merge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Olof Johansson: "Another batch of fixes for ARM SoCs for 3.13. The diffstat is large, mostly because of: - Another set of fixes to fix regressions caused by moving OMAP from board files to DT. Tony thinks this was the last major set of fixes, with maybe just a few small patches to follow. - More fixes for Marvell platforms, most dealing with misdescribed PCIe hardware, i.e. incorrect number of busses on some SoCs, etc. The line delta adds up due to various ranges moving around when this is fixed. But there's also: - Some smaller tweaks to defconfigs to make more boards bootable in my test setup for better coverage. - There are also a few other smaller fixes, a short series for at91, a couple of reverts for ux500, etc" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (39 commits) arm: dts: socfpga: Change some clocks of gate-clk type to perip-clk arm: socfpga: Enable ARM_TWD for socfpga ARM: multi_v7_defconfig: enable SDHCI_BCM_KONA and MMC_BLOCK_MINORS=16 ARM: sunxi_defconfig: enable NFS, TMPFS, PRINTK_TIME and nfsroot support ARM: multi_v7_defconfig: enable network for BeagleBone Black ARM: dts: Fix the name of supplies for smsc911x shared by OMAP ARM: OMAP2+: Powerdomain: Fix unchecked dereference of arch_pwrdm ARM: dts: omap3-beagle: Add omap-twl4030 audio support ARM: dts: omap4-sdp: Fix pin muxing for wl12xx ARM: dts: omap4-panda-common: Fix pin muxing for wl12xx ARM: at91: fixed unresolved symbol "at91_pm_set_standby" when built without CONFIG_PM ARM: at91: add usart3 alias to dtsi ARM: at91: sama5d3: reduce TWI internal clock frequency mmc: omap: Fix I2C dependency and make driver usable with device tree mmc: omap: Fix DMA configuration to not rely on device id ARM: dts: omap3-beagle: Fix USB host on beagle boards (for 3.13) ARM: dts: omap3-igep0020: name twl4030 VPLL2 regulator as vdds_dsi ARM: dts: AM33XX IGEP0033: add USB support ARM: dts: AM33XX BASE0033: add 32KBit EEPROM support ARM: dts: AM33XX BASE0033: add pinmux and user led support ...
-rw-r--r--Documentation/devicetree/bindings/mmc/ti-omap.txt54
-rw-r--r--arch/arm/boot/dts/am335x-base0033.dts79
-rw-r--r--arch/arm/boot/dts/am335x-igep0033.dtsi29
-rw-r--r--arch/arm/boot/dts/armada-370-db.dts28
-rw-r--r--arch/arm/boot/dts/armada-370-xp.dtsi2
-rw-r--r--arch/arm/boot/dts/armada-xp-mv78230.dtsi24
-rw-r--r--arch/arm/boot/dts/armada-xp-mv78260.dtsi109
-rw-r--r--arch/arm/boot/dts/at91sam9x5_usart3.dtsi4
-rw-r--r--arch/arm/boot/dts/omap-gpmc-smsc911x.dtsi4
-rw-r--r--arch/arm/boot/dts/omap3-beagle-xm.dts7
-rw-r--r--arch/arm/boot/dts/omap3-beagle.dts21
-rw-r--r--arch/arm/boot/dts/omap3-igep.dtsi85
-rw-r--r--arch/arm/boot/dts/omap3-igep0020.dts50
-rw-r--r--arch/arm/boot/dts/omap3-igep0030.dts4
-rw-r--r--arch/arm/boot/dts/omap3-n900.dts23
-rw-r--r--arch/arm/boot/dts/omap3.dtsi42
-rw-r--r--arch/arm/boot/dts/omap4-panda-common.dtsi20
-rw-r--r--arch/arm/boot/dts/omap4-sdp.dts12
-rw-r--r--arch/arm/boot/dts/socfpga.dtsi7
-rw-r--r--arch/arm/configs/multi_v7_defconfig3
-rw-r--r--arch/arm/configs/omap2plus_defconfig1
-rw-r--r--arch/arm/configs/sunxi_defconfig7
-rw-r--r--arch/arm/configs/u8500_defconfig3
-rw-r--r--arch/arm/mach-at91/pm.h4
-rw-r--r--arch/arm/mach-at91/sama5d3.c6
-rw-r--r--arch/arm/mach-omap2/dss-common.c2
-rw-r--r--arch/arm/mach-omap2/pdata-quirks.c1
-rw-r--r--arch/arm/mach-omap2/powerdomain.c3
-rw-r--r--arch/arm/mach-socfpga/Kconfig1
-rw-r--r--arch/arm/mach-ux500/cpu-db8500.c4
-rw-r--r--arch/arm/plat-omap/include/plat/dmtimer.h5
-rw-r--r--drivers/mmc/host/omap.c45
32 files changed, 575 insertions, 114 deletions
diff --git a/Documentation/devicetree/bindings/mmc/ti-omap.txt b/Documentation/devicetree/bindings/mmc/ti-omap.txt
new file mode 100644
index 000000000000..8de579969763
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/ti-omap.txt
@@ -0,0 +1,54 @@
+* TI MMC host controller for OMAP1 and 2420
+
+The MMC Host Controller on TI OMAP1 and 2420 family provides
+an interface for MMC, SD, and SDIO types of memory cards.
+
+This file documents differences between the core properties described
+by mmc.txt and the properties used by the omap mmc driver.
+
+Note that this driver will not work with omap2430 or later omaps,
+please see the omap hsmmc driver for the current omaps.
+
+Required properties:
+- compatible: Must be "ti,omap2420-mmc", for OMAP2420 controllers
+- ti,hwmods: For 2420, must be "msdi<n>", where n is controller
+ instance starting 1
+
+Examples:
+
+ msdi1: mmc@4809c000 {
+ compatible = "ti,omap2420-mmc";
+ ti,hwmods = "msdi1";
+ reg = <0x4809c000 0x80>;
+ interrupts = <83>;
+ dmas = <&sdma 61 &sdma 62>;
+ dma-names = "tx", "rx";
+ };
+
+* TI MMC host controller for OMAP1 and 2420
+
+The MMC Host Controller on TI OMAP1 and 2420 family provides
+an interface for MMC, SD, and SDIO types of memory cards.
+
+This file documents differences between the core properties described
+by mmc.txt and the properties used by the omap mmc driver.
+
+Note that this driver will not work with omap2430 or later omaps,
+please see the omap hsmmc driver for the current omaps.
+
+Required properties:
+- compatible: Must be "ti,omap2420-mmc", for OMAP2420 controllers
+- ti,hwmods: For 2420, must be "msdi<n>", where n is controller
+ instance starting 1
+
+Examples:
+
+ msdi1: mmc@4809c000 {
+ compatible = "ti,omap2420-mmc";
+ ti,hwmods = "msdi1";
+ reg = <0x4809c000 0x80>;
+ interrupts = <83>;
+ dmas = <&sdma 61 &sdma 62>;
+ dma-names = "tx", "rx";
+ };
+
diff --git a/arch/arm/boot/dts/am335x-base0033.dts b/arch/arm/boot/dts/am335x-base0033.dts
index b4f95c2bbf74..72a9b3fc4251 100644
--- a/arch/arm/boot/dts/am335x-base0033.dts
+++ b/arch/arm/boot/dts/am335x-base0033.dts
@@ -13,4 +13,83 @@
/ {
model = "IGEP COM AM335x on AQUILA Expansion";
compatible = "isee,am335x-base0033", "isee,am335x-igep0033", "ti,am33xx";
+
+ hdmi {
+ compatible = "ti,tilcdc,slave";
+ i2c = <&i2c0>;
+ pinctrl-names = "default", "off";
+ pinctrl-0 = <&nxp_hdmi_pins>;
+ pinctrl-1 = <&nxp_hdmi_off_pins>;
+ status = "okay";
+ };
+
+ leds_base {
+ pinctrl-names = "default";
+ pinctrl-0 = <&leds_base_pins>;
+
+ compatible = "gpio-leds";
+
+ led@0 {
+ label = "base:red:user";
+ gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>; /* gpio1_21 */
+ default-state = "off";
+ };
+
+ led@1 {
+ label = "base:green:user";
+ gpios = <&gpio2 0 GPIO_ACTIVE_HIGH>; /* gpio2_0 */
+ default-state = "off";
+ };
+ };
+};
+
+&am33xx_pinmux {
+ nxp_hdmi_pins: pinmux_nxp_hdmi_pins {
+ pinctrl-single,pins = <
+ 0x1b0 (PIN_OUTPUT | MUX_MODE3) /* xdma_event_intr0.clkout1 */
+ 0xa0 (PIN_OUTPUT | MUX_MODE0) /* lcd_data0 */
+ 0xa4 (PIN_OUTPUT | MUX_MODE0) /* lcd_data1 */
+ 0xa8 (PIN_OUTPUT | MUX_MODE0) /* lcd_data2 */
+ 0xac (PIN_OUTPUT | MUX_MODE0) /* lcd_data3 */
+ 0xb0 (PIN_OUTPUT | MUX_MODE0) /* lcd_data4 */
+ 0xb4 (PIN_OUTPUT | MUX_MODE0) /* lcd_data5 */
+ 0xb8 (PIN_OUTPUT | MUX_MODE0) /* lcd_data6 */
+ 0xbc (PIN_OUTPUT | MUX_MODE0) /* lcd_data7 */
+ 0xc0 (PIN_OUTPUT | MUX_MODE0) /* lcd_data8 */
+ 0xc4 (PIN_OUTPUT | MUX_MODE0) /* lcd_data9 */
+ 0xc8 (PIN_OUTPUT | MUX_MODE0) /* lcd_data10 */
+ 0xcc (PIN_OUTPUT | MUX_MODE0) /* lcd_data11 */
+ 0xd0 (PIN_OUTPUT | MUX_MODE0) /* lcd_data12 */
+ 0xd4 (PIN_OUTPUT | MUX_MODE0) /* lcd_data13 */
+ 0xd8 (PIN_OUTPUT | MUX_MODE0) /* lcd_data14 */
+ 0xdc (PIN_OUTPUT | MUX_MODE0) /* lcd_data15 */
+ 0xe0 (PIN_OUTPUT | MUX_MODE0) /* lcd_vsync */
+ 0xe4 (PIN_OUTPUT | MUX_MODE0) /* lcd_hsync */
+ 0xe8 (PIN_OUTPUT | MUX_MODE0) /* lcd_pclk */
+ 0xec (PIN_OUTPUT | MUX_MODE0) /* lcd_ac_bias_en */
+ >;
+ };
+ nxp_hdmi_off_pins: pinmux_nxp_hdmi_off_pins {
+ pinctrl-single,pins = <
+ 0x1b0 (PIN_OUTPUT | MUX_MODE3) /* xdma_event_intr0.clkout1 */
+ >;
+ };
+
+ leds_base_pins: pinmux_leds_base_pins {
+ pinctrl-single,pins = <
+ 0x54 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a5.gpio1_21 */
+ 0x88 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_csn3.gpio2_0 */
+ >;
+ };
+};
+
+&lcdc {
+ status = "okay";
+};
+
+&i2c0 {
+ eeprom: eeprom@50 {
+ compatible = "at,24c256";
+ reg = <0x50>;
+ };
};
diff --git a/arch/arm/boot/dts/am335x-igep0033.dtsi b/arch/arm/boot/dts/am335x-igep0033.dtsi
index 619624479311..7063311a58d9 100644
--- a/arch/arm/boot/dts/am335x-igep0033.dtsi
+++ b/arch/arm/boot/dts/am335x-igep0033.dtsi
@@ -199,6 +199,35 @@
pinctrl-0 = <&uart0_pins>;
};
+&usb {
+ status = "okay";
+
+ control@44e10000 {
+ status = "okay";
+ };
+
+ usb-phy@47401300 {
+ status = "okay";
+ };
+
+ usb-phy@47401b00 {
+ status = "okay";
+ };
+
+ usb@47401000 {
+ status = "okay";
+ };
+
+ usb@47401800 {
+ status = "okay";
+ dr_mode = "host";
+ };
+
+ dma-controller@07402000 {
+ status = "okay";
+ };
+};
+
#include "tps65910.dtsi"
&tps {
diff --git a/arch/arm/boot/dts/armada-370-db.dts b/arch/arm/boot/dts/armada-370-db.dts
index 90ce29dbe119..08a56bcfc724 100644
--- a/arch/arm/boot/dts/armada-370-db.dts
+++ b/arch/arm/boot/dts/armada-370-db.dts
@@ -99,22 +99,22 @@
spi-max-frequency = <50000000>;
};
};
+ };
- pcie-controller {
+ pcie-controller {
+ status = "okay";
+ /*
+ * The two PCIe units are accessible through
+ * both standard PCIe slots and mini-PCIe
+ * slots on the board.
+ */
+ pcie@1,0 {
+ /* Port 0, Lane 0 */
+ status = "okay";
+ };
+ pcie@2,0 {
+ /* Port 1, Lane 0 */
status = "okay";
- /*
- * The two PCIe units are accessible through
- * both standard PCIe slots and mini-PCIe
- * slots on the board.
- */
- pcie@1,0 {
- /* Port 0, Lane 0 */
- status = "okay";
- };
- pcie@2,0 {
- /* Port 1, Lane 0 */
- status = "okay";
- };
};
};
};
diff --git a/arch/arm/boot/dts/armada-370-xp.dtsi b/arch/arm/boot/dts/armada-370-xp.dtsi
index 00d6a798c705..7f10f627ae5b 100644
--- a/arch/arm/boot/dts/armada-370-xp.dtsi
+++ b/arch/arm/boot/dts/armada-370-xp.dtsi
@@ -118,7 +118,7 @@
coherency-fabric@20200 {
compatible = "marvell,coherency-fabric";
- reg = <0x20200 0xb0>, <0x21810 0x1c>;
+ reg = <0x20200 0xb0>, <0x21010 0x1c>;
};
serial@12000 {
diff --git a/arch/arm/boot/dts/armada-xp-mv78230.dtsi b/arch/arm/boot/dts/armada-xp-mv78230.dtsi
index 3f5e6121c730..98335fb34b7a 100644
--- a/arch/arm/boot/dts/armada-xp-mv78230.dtsi
+++ b/arch/arm/boot/dts/armada-xp-mv78230.dtsi
@@ -47,7 +47,7 @@
/*
* MV78230 has 2 PCIe units Gen2.0: One unit can be
* configured as x4 or quad x1 lanes. One unit is
- * x4/x1.
+ * x1 only.
*/
pcie-controller {
compatible = "marvell,armada-xp-pcie";
@@ -62,10 +62,10 @@
ranges =
<0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000 /* Port 0.0 registers */
- 0x82000000 0 0x42000 MBUS_ID(0xf0, 0x01) 0x42000 0 0x00002000 /* Port 2.0 registers */
0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000 /* Port 0.1 registers */
0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000 /* Port 0.2 registers */
0x82000000 0 0x4c000 MBUS_ID(0xf0, 0x01) 0x4c000 0 0x00002000 /* Port 0.3 registers */
+ 0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000 /* Port 1.0 registers */
0x82000000 0x1 0 MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */
0x81000000 0x1 0 MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO */
0x82000000 0x2 0 MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 0.1 MEM */
@@ -74,8 +74,8 @@
0x81000000 0x3 0 MBUS_ID(0x04, 0xb0) 0 1 0 /* Port 0.2 IO */
0x82000000 0x4 0 MBUS_ID(0x04, 0x78) 0 1 0 /* Port 0.3 MEM */
0x81000000 0x4 0 MBUS_ID(0x04, 0x70) 0 1 0 /* Port 0.3 IO */
- 0x82000000 0x9 0 MBUS_ID(0x04, 0xf8) 0 1 0 /* Port 2.0 MEM */
- 0x81000000 0x9 0 MBUS_ID(0x04, 0xf0) 0 1 0 /* Port 2.0 IO */>;
+ 0x82000000 0x5 0 MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 1.0 MEM */
+ 0x81000000 0x5 0 MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 1.0 IO */>;
pcie@1,0 {
device_type = "pci";
@@ -145,20 +145,20 @@
status = "disabled";
};
- pcie@9,0 {
+ pcie@5,0 {
device_type = "pci";
- assigned-addresses = <0x82000800 0 0x42000 0 0x2000>;
- reg = <0x4800 0 0 0 0>;
+ assigned-addresses = <0x82000800 0 0x80000 0 0x2000>;
+ reg = <0x2800 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
#interrupt-cells = <1>;
- ranges = <0x82000000 0 0 0x82000000 0x9 0 1 0
- 0x81000000 0 0 0x81000000 0x9 0 1 0>;
+ ranges = <0x82000000 0 0 0x82000000 0x5 0 1 0
+ 0x81000000 0 0 0x81000000 0x5 0 1 0>;
interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &mpic 99>;
- marvell,pcie-port = <2>;
+ interrupt-map = <0 0 0 0 &mpic 62>;
+ marvell,pcie-port = <1>;
marvell,pcie-lane = <0>;
- clocks = <&gateclk 26>;
+ clocks = <&gateclk 9>;
status = "disabled";
};
};
diff --git a/arch/arm/boot/dts/armada-xp-mv78260.dtsi b/arch/arm/boot/dts/armada-xp-mv78260.dtsi
index 3e9fd1353f89..66609684d41b 100644
--- a/arch/arm/boot/dts/armada-xp-mv78260.dtsi
+++ b/arch/arm/boot/dts/armada-xp-mv78260.dtsi
@@ -48,7 +48,7 @@
/*
* MV78260 has 3 PCIe units Gen2.0: Two units can be
* configured as x4 or quad x1 lanes. One unit is
- * x4/x1.
+ * x4 only.
*/
pcie-controller {
compatible = "marvell,armada-xp-pcie";
@@ -68,7 +68,9 @@
0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000 /* Port 0.2 registers */
0x82000000 0 0x4c000 MBUS_ID(0xf0, 0x01) 0x4c000 0 0x00002000 /* Port 0.3 registers */
0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000 /* Port 1.0 registers */
- 0x82000000 0 0x82000 MBUS_ID(0xf0, 0x01) 0x82000 0 0x00002000 /* Port 3.0 registers */
+ 0x82000000 0 0x84000 MBUS_ID(0xf0, 0x01) 0x84000 0 0x00002000 /* Port 1.1 registers */
+ 0x82000000 0 0x88000 MBUS_ID(0xf0, 0x01) 0x88000 0 0x00002000 /* Port 1.2 registers */
+ 0x82000000 0 0x8c000 MBUS_ID(0xf0, 0x01) 0x8c000 0 0x00002000 /* Port 1.3 registers */
0x82000000 0x1 0 MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */
0x81000000 0x1 0 MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO */
0x82000000 0x2 0 MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 0.1 MEM */
@@ -77,10 +79,18 @@
0x81000000 0x3 0 MBUS_ID(0x04, 0xb0) 0 1 0 /* Port 0.2 IO */
0x82000000 0x4 0 MBUS_ID(0x04, 0x78) 0 1 0 /* Port 0.3 MEM */
0x81000000 0x4 0 MBUS_ID(0x04, 0x70) 0 1 0 /* Port 0.3 IO */
- 0x82000000 0x9 0 MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 1.0 MEM */
- 0x81000000 0x9 0 MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 1.0 IO */
- 0x82000000 0xa 0 MBUS_ID(0x08, 0xf8) 0 1 0 /* Port 3.0 MEM */
- 0x81000000 0xa 0 MBUS_ID(0x08, 0xf0) 0 1 0 /* Port 3.0 IO */>;
+
+ 0x82000000 0x5 0 MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 1.0 MEM */
+ 0x81000000 0x5 0 MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 1.0 IO */
+ 0x82000000 0x6 0 MBUS_ID(0x08, 0xd8) 0 1 0 /* Port 1.1 MEM */
+ 0x81000000 0x6 0 MBUS_ID(0x08, 0xd0) 0 1 0 /* Port 1.1 IO */
+ 0x82000000 0x7 0 MBUS_ID(0x08, 0xb8) 0 1 0 /* Port 1.2 MEM */
+ 0x81000000 0x7 0 MBUS_ID(0x08, 0xb0) 0 1 0 /* Port 1.2 IO */
+ 0x82000000 0x8 0 MBUS_ID(0x08, 0x78) 0 1 0 /* Port 1.3 MEM */
+ 0x81000000 0x8 0 MBUS_ID(0x08, 0x70) 0 1 0 /* Port 1.3 IO */
+
+ 0x82000000 0x9 0 MBUS_ID(0x04, 0xf8) 0 1 0 /* Port 2.0 MEM */
+ 0x81000000 0x9 0 MBUS_ID(0x04, 0xf0) 0 1 0 /* Port 2.0 IO */>;
pcie@1,0 {
device_type = "pci";
@@ -106,8 +116,8 @@
#address-cells = <3>;
#size-cells = <2>;
#interrupt-cells = <1>;
- ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
- 0x81000000 0 0 0x81000000 0x2 0 1 0>;
+ ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
+ 0x81000000 0 0 0x81000000 0x2 0 1 0>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &mpic 59>;
marvell,pcie-port = <0>;
@@ -150,37 +160,88 @@
status = "disabled";
};
- pcie@9,0 {
+ pcie@5,0 {
device_type = "pci";
- assigned-addresses = <0x82000800 0 0x42000 0 0x2000>;
- reg = <0x4800 0 0 0 0>;
+ assigned-addresses = <0x82000800 0 0x80000 0 0x2000>;
+ reg = <0x2800 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
#interrupt-cells = <1>;
- ranges = <0x82000000 0 0 0x82000000 0x9 0 1 0
- 0x81000000 0 0 0x81000000 0x9 0 1 0>;
+ ranges = <0x82000000 0 0 0x82000000 0x5 0 1 0
+ 0x81000000 0 0 0x81000000 0x5 0 1 0>;
interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &mpic 99>;
- marvell,pcie-port = <2>;
+ interrupt-map = <0 0 0 0 &mpic 62>;
+ marvell,pcie-port = <1>;
marvell,pcie-lane = <0>;
- clocks = <&gateclk 26>;
+ clocks = <&gateclk 9>;
status = "disabled";
};
- pcie@10,0 {
+ pcie@6,0 {
device_type = "pci";
- assigned-addresses = <0x82000800 0 0x82000 0 0x2000>;
- reg = <0x5000 0 0 0 0>;
+ assigned-addresses = <0x82000800 0 0x84000 0 0x2000>;
+ reg = <0x3000 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
#interrupt-cells = <1>;
- ranges = <0x82000000 0 0 0x82000000 0xa 0 1 0
- 0x81000000 0 0 0x81000000 0xa 0 1 0>;
+ ranges = <0x82000000 0 0 0x82000000 0x6 0 1 0
+ 0x81000000 0 0 0x81000000 0x6 0 1 0>;
interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &mpic 103>;
- marvell,pcie-port = <3>;
+ interrupt-map = <0 0 0 0 &mpic 63>;
+ marvell,pcie-port = <1>;
+ marvell,pcie-lane = <1>;
+ clocks = <&gateclk 10>;
+ status = "disabled";
+ };
+
+ pcie@7,0 {
+ device_type = "pci";
+ assigned-addresses = <0x82000800 0 0x88000 0 0x2000>;
+ reg = <0x3800 0 0 0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ ranges = <0x82000000 0 0 0x82000000 0x7 0 1 0
+ 0x81000000 0 0 0x81000000 0x7 0 1 0>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &mpic 64>;
+ marvell,pcie-port = <1>;
+ marvell,pcie-lane = <2>;
+ clocks = <&gateclk 11>;
+ status = "disabled";
+ };
+
+ pcie@8,0 {
+ device_type = "pci";
+ assigned-addresses = <0x82000800 0 0x8c000 0 0x2000>;
+ reg = <0x4000 0 0 0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ ranges = <0x82000000 0 0 0x82000000 0x8 0 1 0
+ 0x81000000 0 0 0x81000000 0x8 0 1 0>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &mpic 65>;
+ marvell,pcie-port = <1>;
+ marvell,pcie-lane = <3>;
+ clocks = <&gateclk 12>;
+ status = "disabled";
+ };
+
+ pcie@9,0 {
+ device_type = "pci";
+ assigned-addresses = <0x82000800 0 0x42000 0 0x2000>;
+ reg = <0x4800 0 0 0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ ranges = <0x82000000 0 0 0x82000000 0x9 0 1 0
+ 0x81000000 0 0 0x81000000 0x9 0 1 0>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &mpic 99>;
+ marvell,pcie-port = <2>;
marvell,pcie-lane = <0>;
- clocks = <&gateclk 27>;
+ clocks = <&gateclk 26>;
status = "disabled";
};
};
diff --git a/arch/arm/boot/dts/at91sam9x5_usart3.dtsi b/arch/arm/boot/dts/at91sam9x5_usart3.dtsi
index 2347e9563cef..6801106fa1f8 100644
--- a/arch/arm/boot/dts/at91sam9x5_usart3.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5_usart3.dtsi
@@ -11,6 +11,10 @@
#include <dt-bindings/interrupt-controller/irq.h>
/ {
+ aliases {
+ serial4 = &usart3;
+ };
+
ahb {
apb {
pinctrl@fffff400 {
diff --git a/arch/arm/boot/dts/omap-gpmc-smsc911x.dtsi b/arch/arm/boot/dts/omap-gpmc-smsc911x.dtsi
index 9c18adf788f7..f577b7df9a29 100644
--- a/arch/arm/boot/dts/omap-gpmc-smsc911x.dtsi
+++ b/arch/arm/boot/dts/omap-gpmc-smsc911x.dtsi
@@ -44,8 +44,8 @@
gpmc,wr-access-ns = <186>;
gpmc,cycle2cycle-samecsen;
gpmc,cycle2cycle-diffcsen;
- vmmc-supply = <&vddvario>;
- vmmc_aux-supply = <&vdd33a>;
+ vddvario-supply = <&vddvario>;
+ vdd33a-supply = <&vdd33a>;
reg-io-width = <4>;
smsc,save-mac-address;
};
diff --git a/arch/arm/boot/dts/omap3-beagle-xm.dts b/arch/arm/boot/dts/omap3-beagle-xm.dts
index 31a632f7effb..df33a50bc070 100644
--- a/arch/arm/boot/dts/omap3-beagle-xm.dts
+++ b/arch/arm/boot/dts/omap3-beagle-xm.dts
@@ -215,3 +215,10 @@
&usbhsehci {
phys = <0 &hsusb2_phy>;
};
+
+&vaux2 {
+ regulator-name = "usb_1v8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+};
diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle.dts
index fa532aaacc68..3ba4a625ea5b 100644
--- a/arch/arm/boot/dts/omap3-beagle.dts
+++ b/arch/arm/boot/dts/omap3-beagle.dts
@@ -61,6 +61,14 @@
vcc-supply = <&hsusb2_power>;
};
+ sound {
+ compatible = "ti,omap-twl4030";
+ ti,model = "omap3beagle";
+
+ ti,mcbsp = <&mcbsp2>;
+ ti,codec = <&twl_audio>;
+ };
+
gpio_keys {
compatible = "gpio-keys";
@@ -120,6 +128,12 @@
reg = <0x48>;
interrupts = <7>; /* SYS_NIRQ cascaded to intc */
interrupt-parent = <&intc>;
+
+ twl_audio: audio {
+ compatible = "ti,twl4030-audio";
+ codec {
+ };
+ };
};
};
@@ -178,3 +192,10 @@
mode = <3>;
power = <50>;
};
+
+&vaux2 {
+ regulator-name = "vdd_ehci";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+};
diff --git a/arch/arm/boot/dts/omap3-igep.dtsi b/arch/arm/boot/dts/omap3-igep.dtsi
index ba1e58b7b7e3..165aaf7591ba 100644
--- a/arch/arm/boot/dts/omap3-igep.dtsi
+++ b/arch/arm/boot/dts/omap3-igep.dtsi
@@ -1,5 +1,5 @@
/*
- * Device Tree Source for IGEP Technology devices
+ * Common device tree for IGEP boards based on AM/DM37x
*
* Copyright (C) 2012 Javier Martinez Canillas <javier@collabora.co.uk>
* Copyright (C) 2012 Enric Balletbo i Serra <eballetbo@gmail.com>
@@ -10,7 +10,7 @@
*/
/dts-v1/;
-#include "omap34xx.dtsi"
+#include "omap36xx.dtsi"
/ {
memory {
@@ -24,6 +24,25 @@
ti,mcbsp = <&mcbsp2>;
ti,codec = <&twl_audio>;
};
+
+ vdd33: regulator-vdd33 {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd33";
+ regulator-always-on;
+ };
+
+ lbee1usjyc_vmmc: lbee1usjyc_vmmc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&lbee1usjyc_pins>;
+ compatible = "regulator-fixed";
+ regulator-name = "regulator-lbee1usjyc";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio5 10 GPIO_ACTIVE_HIGH>; /* gpio_138 WIFI_PDN */
+ startup-delay-us = <10000>;
+ enable-active-high;
+ vin-supply = <&vdd33>;
+ };
};
&omap3_pmx_core {
@@ -48,6 +67,15 @@
>;
};
+ /* WiFi/BT combo */
+ lbee1usjyc_pins: pinmux_lbee1usjyc_pins {
+ pinctrl-single,pins = <
+ 0x136 (PIN_OUTPUT | MUX_MODE4) /* sdmmc2_dat5.gpio_137 */
+ 0x138 (PIN_OUTPUT | MUX_MODE4) /* sdmmc2_dat6.gpio_138 */
+ 0x13a (PIN_OUTPUT | MUX_MODE4) /* sdmmc2_dat7.gpio_139 */
+ >;
+ };
+
mcbsp2_pins: pinmux_mcbsp2_pins {
pinctrl-single,pins = <
0x10c (PIN_INPUT | MUX_MODE0) /* mcbsp2_fsx.mcbsp2_fsx */
@@ -65,10 +93,17 @@
0x11a (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat1.sdmmc1_dat1 */
0x11c (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat2.sdmmc1_dat2 */
0x11e (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat3.sdmmc1_dat3 */
- 0x120 (PIN_INPUT | MUX_MODE0) /* sdmmc1_dat4.sdmmc1_dat4 */
- 0x122 (PIN_INPUT | MUX_MODE0) /* sdmmc1_dat5.sdmmc1_dat5 */
- 0x124 (PIN_INPUT | MUX_MODE0) /* sdmmc1_dat6.sdmmc1_dat6 */
- 0x126 (PIN_INPUT | MUX_MODE0) /* sdmmc1_dat7.sdmmc1_dat7 */
+ >;
+ };
+
+ mmc2_pins: pinmux_mmc2_pins {
+ pinctrl-single,pins = <
+ 0x128 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_clk.sdmmc2_clk */
+ 0x12a (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_cmd.sdmmc2_cmd */
+ 0x12c (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat0.sdmmc2_dat0 */
+ 0x12e (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat1.sdmmc2_dat1 */
+ 0x130 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat2.sdmmc2_dat2 */
+ 0x132 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat3.sdmmc2_dat3 */
>;
};
@@ -78,10 +113,33 @@
>;
};
+ i2c1_pins: pinmux_i2c1_pins {
+ pinctrl-single,pins = <
+ 0x18a (PIN_INPUT | MUX_MODE0) /* i2c1_scl.i2c1_scl */
+ 0x18c (PIN_INPUT | MUX_MODE0) /* i2c1_sda.i2c1_sda */
+ >;
+ };
+
+ i2c2_pins: pinmux_i2c2_pins {
+ pinctrl-single,pins = <
+ 0x18e (PIN_INPUT | MUX_MODE0) /* i2c2_scl.i2c2_scl */
+ 0x190 (PIN_INPUT | MUX_MODE0) /* i2c2_sda.i2c2_sda */
+ >;
+ };
+
+ i2c3_pins: pinmux_i2c3_pins {
+ pinctrl-single,pins = <
+ 0x192 (PIN_INPUT | MUX_MODE0) /* i2c3_scl.i2c3_scl */
+ 0x194 (PIN_INPUT | MUX_MODE0) /* i2c3_sda.i2c3_sda */
+ >;
+ };
+
leds_pins: pinmux_leds_pins { };
};
&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins>;
clock-frequency = <2600000>;
twl: twl@48 {
@@ -101,9 +159,16 @@
#include "twl4030_omap3.dtsi"
&i2c2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_pins>;
clock-frequency = <400000>;
};
+&i2c3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c3_pins>;
+};
+
&mcbsp2 {
pinctrl-names = "default";
pinctrl-0 = <&mcbsp2_pins>;
@@ -114,11 +179,15 @@
pinctrl-0 = <&mmc1_pins>;
vmmc-supply = <&vmmc1>;
vmmc_aux-supply = <&vsim>;
- bus-width = <8>;
+ bus-width = <4>;
};
&mmc2 {
- status = "disabled";
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc2_pins>;
+ vmmc-supply = <&lbee1usjyc_vmmc>;
+ bus-width = <4>;
+ non-removable;
};
&mmc3 {
diff --git a/arch/arm/boot/dts/omap3-igep0020.dts b/arch/arm/boot/dts/omap3-igep0020.dts
index d5cc79267250..1c7e74d2d2bc 100644
--- a/arch/arm/boot/dts/omap3-igep0020.dts
+++ b/arch/arm/boot/dts/omap3-igep0020.dts
@@ -1,5 +1,5 @@
/*
- * Device Tree Source for IGEPv2 board
+ * Device Tree Source for IGEPv2 Rev. (TI OMAP AM/DM37x)
*
* Copyright (C) 2012 Javier Martinez Canillas <javier@collabora.co.uk>
* Copyright (C) 2012 Enric Balletbo i Serra <eballetbo@gmail.com>
@@ -13,7 +13,7 @@
#include "omap-gpmc-smsc911x.dtsi"
/ {
- model = "IGEPv2";
+ model = "IGEPv2 (TI OMAP AM/DM37x)";
compatible = "isee,omap3-igep0020", "ti,omap3";
leds {
@@ -67,6 +67,8 @@
pinctrl-names = "default";
pinctrl-0 = <
&hsusbb1_pins
+ &tfp410_pins
+ &dss_pins
>;
hsusbb1_pins: pinmux_hsusbb1_pins {
@@ -85,6 +87,45 @@
0x5ba (PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d7.hsusb1_data3 */
>;
};
+
+ tfp410_pins: tfp410_dvi_pins {
+ pinctrl-single,pins = <
+ 0x196 (PIN_OUTPUT | MUX_MODE4) /* hdq_sio.gpio_170 */
+ >;
+ };
+
+ dss_pins: pinmux_dss_dvi_pins {
+ pinctrl-single,pins = <
+ 0x0a4 (PIN_OUTPUT | MUX_MODE0) /* dss_pclk.dss_pclk */
+ 0x0a6 (PIN_OUTPUT | MUX_MODE0) /* dss_hsync.dss_hsync */
+ 0x0a8 (PIN_OUTPUT | MUX_MODE0) /* dss_vsync.dss_vsync */
+ 0x0aa (PIN_OUTPUT | MUX_MODE0) /* dss_acbias.dss_acbias */
+ 0x0ac (PIN_OUTPUT | MUX_MODE0) /* dss_data0.dss_data0 */
+ 0x0ae (PIN_OUTPUT | MUX_MODE0) /* dss_data1.dss_data1 */
+ 0x0b0 (PIN_OUTPUT | MUX_MODE0) /* dss_data2.dss_data2 */
+ 0x0b2 (PIN_OUTPUT | MUX_MODE0) /* dss_data3.dss_data3 */
+ 0x0b4 (PIN_OUTPUT | MUX_MODE0) /* dss_data4.dss_data4 */
+ 0x0b6 (PIN_OUTPUT | MUX_MODE0) /* dss_data5.dss_data5 */
+ 0x0b8 (PIN_OUTPUT | MUX_MODE0) /* dss_data6.dss_data6 */
+ 0x0ba (PIN_OUTPUT | MUX_MODE0) /* dss_data7.dss_data7 */
+ 0x0bc (PIN_OUTPUT | MUX_MODE0) /* dss_data8.dss_data8 */
+ 0x0be (PIN_OUTPUT | MUX_MODE0) /* dss_data9.dss_data9 */
+ 0x0c0 (PIN_OUTPUT | MUX_MODE0) /* dss_data10.dss_data10 */
+ 0x0c2 (PIN_OUTPUT | MUX_MODE0) /* dss_data11.dss_data11 */
+ 0x0c4 (PIN_OUTPUT | MUX_MODE0) /* dss_data12.dss_data12 */
+ 0x0c6 (PIN_OUTPUT | MUX_MODE0) /* dss_data13.dss_data13 */
+ 0x0c8 (PIN_OUTPUT | MUX_MODE0) /* dss_data14.dss_data14 */
+ 0x0ca (PIN_OUTPUT | MUX_MODE0) /* dss_data15.dss_data15 */
+ 0x0cc (PIN_OUTPUT | MUX_MODE0) /* dss_data16.dss_data16 */
+ 0x0ce (PIN_OUTPUT | MUX_MODE0) /* dss_data17.dss_data17 */
+ 0x0d0 (PIN_OUTPUT | MUX_MODE0) /* dss_data18.dss_data18 */
+ 0x0d2 (PIN_OUTPUT | MUX_MODE0) /* dss_data19.dss_data19 */
+ 0x0d4 (PIN_OUTPUT | MUX_MODE0) /* dss_data20.dss_data20 */
+ 0x0d6 (PIN_OUTPUT | MUX_MODE0) /* dss_data21.dss_data21 */
+ 0x0d8 (PIN_OUTPUT | MUX_MODE0) /* dss_data22.dss_data22 */
+ 0x0da (PIN_OUTPUT | MUX_MODE0) /* dss_data23.dss_data23 */
+ >;
+ };
};
&leds_pins {
@@ -174,3 +215,8 @@
&usbhsehci {
phys = <&hsusb1_phy>;
};
+
+&vpll2 {
+ /* Needed for DSS */
+ regulator-name = "vdds_dsi";
+};
diff --git a/arch/arm/boot/dts/omap3-igep0030.dts b/arch/arm/boot/dts/omap3-igep0030.dts
index 525e6d9b0978..02a23f8a3384 100644
--- a/arch/arm/boot/dts/omap3-igep0030.dts
+++ b/arch/arm/boot/dts/omap3-igep0030.dts
@@ -1,5 +1,5 @@
/*
- * Device Tree Source for IGEP COM Module
+ * Device Tree Source for IGEP COM MODULE (TI OMAP AM/DM37x)
*
* Copyright (C) 2012 Javier Martinez Canillas <javier@collabora.co.uk>
* Copyright (C) 2012 Enric Balletbo i Serra <eballetbo@gmail.com>
@@ -12,7 +12,7 @@
#include "omap3-igep.dtsi"
/ {
- model = "IGEP COM Module";
+ model = "IGEP COM MODULE (TI OMAP AM/DM37x)";
compatible = "isee,omap3-igep0030", "ti,omap3";
leds {
diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts
index c4f20bfe4cce..c2c306d13b87 100644
--- a/arch/arm/boot/dts/omap3-n900.dts
+++ b/arch/arm/boot/dts/omap3-n900.dts
@@ -125,6 +125,21 @@
>;
};
+ mmc2_pins: pinmux_mmc2_pins {
+ pinctrl-single,pins = <
+ 0x128 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_clk */
+ 0x12a (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_cmd */
+ 0x12c (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat0 */
+ 0x12e (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat1 */
+ 0x130 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat2 */
+ 0x132 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat3 */
+ 0x134 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat4 */
+ 0x136 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat5 */
+ 0x138 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat6 */
+ 0x13a (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat7 */
+ >;
+ };
+
display_pins: pinmux_display_pins {
pinctrl-single,pins = <
0x0d4 (PIN_OUTPUT | MUX_MODE4) /* RX51_LCD_RESET_GPIO */
@@ -358,8 +373,14 @@
cd-gpios = <&gpio6 0 GPIO_ACTIVE_HIGH>; /* 160 */
};
+/* most boards use vaux3, only some old versions use vmmc2 instead */
&mmc2 {
- status = "disabled";
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc2_pins>;
+ vmmc-supply = <&vaux3>;
+ vmmc_aux-supply = <&vsim>;
+ bus-width = <8>;
+ non-removable;
};
&mmc3 {
diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi
index f3a0c26ed0c2..daabf99d402a 100644
--- a/arch/arm/boot/dts/omap3.dtsi
+++ b/arch/arm/boot/dts/omap3.dtsi
@@ -82,6 +82,13 @@
ranges;
ti,hwmods = "l3_main";
+ aes: aes@480c5000 {
+ compatible = "ti,omap3-aes";
+ ti,hwmods = "aes";
+ reg = <0x480c5000 0x50>;
+ interrupts = <0>;
+ };
+
counter32k: counter@48320000 {
compatible = "ti,omap-counter32k";
reg = <0x48320000 0x20>;
@@ -260,6 +267,13 @@
ti,hwmods = "i2c3";
};
+ mailbox: mailbox@48094000 {
+ compatible = "ti,omap3-mailbox";
+ ti,hwmods = "mailbox";
+ reg = <0x48094000 0x200>;
+ interrupts = <26>;
+ };
+
mcspi1: spi@48098000 {
compatible = "ti,omap2-mcspi";
reg = <0x48098000 0x100>;
@@ -357,6 +371,13 @@
dma-names = "tx", "rx";
};
+ mmu_isp: mmu@480bd400 {
+ compatible = "ti,omap3-mmu-isp";
+ ti,hwmods = "mmu_isp";
+ reg = <0x480bd400 0x80>;
+ interrupts = <8>;
+ };
+
wdt2: wdt@48314000 {
compatible = "ti,omap3-wdt";
reg = <0x48314000 0x80>;
@@ -442,6 +463,27 @@
dma-names = "tx", "rx";
};
+ sham: sham@480c3000 {
+ compatible = "ti,omap3-sham";
+ ti,hwmods = "sham";
+ reg = <0x480c3000 0x64>;
+ interrupts = <49>;
+ };
+
+ smartreflex_core: smartreflex@480cb000 {
+ compatible = "ti,omap3-smartreflex-core";
+ ti,hwmods = "smartreflex_core";
+ reg = <0x480cb000 0x400>;
+ interrupts = <19>;
+ };
+
+ smartreflex_mpu_iva: smartreflex@480c9000 {
+ compatible = "ti,omap3-smartreflex-iva";
+ ti,hwmods = "smartreflex_mpu_iva";
+ reg = <0x480c9000 0x400>;
+ interrupts = <18>;
+ };
+
timer1: timer@48318000 {
compatible = "ti,omap3430-timer";
reg = <0x48318000 0x400>;
diff --git a/arch/arm/boot/dts/omap4-panda-common.dtsi b/arch/arm/boot/dts/omap4-panda-common.dtsi
index 298e85020e1b..88c6a05cab41 100644
--- a/arch/arm/boot/dts/omap4-panda-common.dtsi
+++ b/arch/arm/boot/dts/omap4-panda-common.dtsi
@@ -246,15 +246,6 @@
0xf0 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c4_sda */
>;
};
-};
-
-&omap4_pmx_wkup {
- led_wkgpio_pins: pinmux_leds_wkpins {
- pinctrl-single,pins = <
- 0x1a (PIN_OUTPUT | MUX_MODE3) /* gpio_wk7 */
- 0x1c (PIN_OUTPUT | MUX_MODE3) /* gpio_wk8 */
- >;
- };
/*
* wl12xx GPIO outputs for WLAN_EN, BT_EN, FM_EN, BT_WAKEUP
@@ -274,7 +265,7 @@
pinctrl-single,pins = <
0x38 (PIN_INPUT | MUX_MODE3) /* gpmc_ncs2.gpio_52 */
0x3a (PIN_INPUT | MUX_MODE3) /* gpmc_ncs3.gpio_53 */
- 0x108 (PIN_OUTPUT | MUX_MODE0) /* sdmmc5_clk.sdmmc5_clk */
+ 0x108 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_clk.sdmmc5_clk */
0x10a (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_cmd.sdmmc5_cmd */
0x10c (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat0.sdmmc5_dat0 */
0x10e (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat1.sdmmc5_dat1 */
@@ -284,6 +275,15 @@
};
};
+&omap4_pmx_wkup {
+ led_wkgpio_pins: pinmux_leds_wkpins {
+ pinctrl-single,pins = <
+ 0x1a (PIN_OUTPUT | MUX_MODE3) /* gpio_wk7 */
+ 0x1c (PIN_OUTPUT | MUX_MODE3) /* gpio_wk8 */
+ >;
+ };
+};
+
&i2c1 {
pinctrl-names = "default";
pinctrl-0 = <&i2c1_pins>;
diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/omap4-sdp.dts
index 5fc3f43c5a81..dbc81fb6ef03 100644
--- a/arch/arm/boot/dts/omap4-sdp.dts
+++ b/arch/arm/boot/dts/omap4-sdp.dts
@@ -300,12 +300,12 @@
wl12xx_pins: pinmux_wl12xx_pins {
pinctrl-single,pins = <
0x3a (PIN_INPUT | MUX_MODE3) /* gpmc_ncs3.gpio_53 */
- 0x108 (PIN_OUTPUT | MUX_MODE3) /* sdmmc5_clk.sdmmc5_clk */
- 0x10a (PIN_INPUT_PULLUP | MUX_MODE3) /* sdmmc5_cmd.sdmmc5_cmd */
- 0x10c (PIN_INPUT_PULLUP | MUX_MODE3) /* sdmmc5_dat0.sdmmc5_dat0 */
- 0x10e (PIN_INPUT_PULLUP | MUX_MODE3) /* sdmmc5_dat1.sdmmc5_dat1 */
- 0x110 (PIN_INPUT_PULLUP | MUX_MODE3) /* sdmmc5_dat2.sdmmc5_dat2 */
- 0x112 (PIN_INPUT_PULLUP | MUX_MODE3) /* sdmmc5_dat3.sdmmc5_dat3 */
+ 0x108 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_clk.sdmmc5_clk */
+ 0x10a (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_cmd.sdmmc5_cmd */
+ 0x10c (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat0.sdmmc5_dat0 */
+ 0x10e (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat1.sdmmc5_dat1 */
+ 0x110 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat2.sdmmc5_dat2 */
+ 0x112 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat3.sdmmc5_dat3 */
>;
};
};
diff --git a/arch/arm/boot/dts/socfpga.dtsi b/arch/arm/boot/dts/socfpga.dtsi
index 6d09b8d42fdd..f936476c2753 100644
--- a/arch/arm/boot/dts/socfpga.dtsi
+++ b/arch/arm/boot/dts/socfpga.dtsi
@@ -245,14 +245,14 @@
mpu_periph_clk: mpu_periph_clk {
#clock-cells = <0>;
- compatible = "altr,socfpga-gate-clk";
+ compatible = "altr,socfpga-perip-clk";
clocks = <&mpuclk>;
fixed-divider = <4>;
};
mpu_l2_ram_clk: mpu_l2_ram_clk {
#clock-cells = <0>;
- compatible = "altr,socfpga-gate-clk";
+ compatible = "altr,socfpga-perip-clk";
clocks = <&mpuclk>;
fixed-divider = <2>;
};
@@ -266,8 +266,9 @@
l3_main_clk: l3_main_clk {
#clock-cells = <0>;
- compatible = "altr,socfpga-gate-clk";
+ compatible = "altr,socfpga-perip-clk";
clocks = <&mainclk>;
+ fixed-divider = <1>;
};
l3_mp_clk: l3_mp_clk {
diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig
index 4a5903e04827..c1df4e9db140 100644
--- a/arch/arm/configs/multi_v7_defconfig
+++ b/arch/arm/configs/multi_v7_defconfig
@@ -69,6 +69,7 @@ CONFIG_KS8851=y
CONFIG_SMSC911X=y
CONFIG_STMMAC_ETH=y
CONFIG_MDIO_SUN4I=y
+CONFIG_TI_CPSW=y
CONFIG_KEYBOARD_SPEAR=y
CONFIG_SERIO_AMBAKMI=y
CONFIG_SERIAL_8250=y
@@ -133,12 +134,14 @@ CONFIG_USB_GPIO_VBUS=y
CONFIG_USB_ISP1301=y
CONFIG_USB_MXS_PHY=y
CONFIG_MMC=y
+CONFIG_MMC_BLOCK_MINORS=16
CONFIG_MMC_ARMMMCI=y
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_PLTFM=y
CONFIG_MMC_SDHCI_ESDHC_IMX=y
CONFIG_MMC_SDHCI_TEGRA=y
CONFIG_MMC_SDHCI_SPEAR=y
+CONFIG_MMC_SDHCI_BCM_KONA=y
CONFIG_MMC_OMAP=y
CONFIG_MMC_OMAP_HS=y
CONFIG_EDAC=y
diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig
index 98a50c309b90..bfa80a11e8c7 100644
--- a/arch/arm/configs/omap2plus_defconfig
+++ b/arch/arm/configs/omap2plus_defconfig
@@ -173,6 +173,7 @@ CONFIG_MFD_PALMAS=y
CONFIG_MFD_TPS65217=y
CONFIG_MFD_TPS65910=y
CONFIG_TWL6040_CORE=y
+CONFIG_REGULATOR_FIXED_VOLTAGE=y
CONFIG_REGULATOR_PALMAS=y
CONFIG_REGULATOR_TPS65023=y
CONFIG_REGULATOR_TPS6507X=y
diff --git a/arch/arm/configs/sunxi_defconfig b/arch/arm/configs/sunxi_defconfig
index d57a85badb5e..3e2259b60236 100644
--- a/arch/arm/configs/sunxi_defconfig
+++ b/arch/arm/configs/sunxi_defconfig
@@ -12,6 +12,9 @@ CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_INET=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
@@ -58,4 +61,8 @@ CONFIG_LEDS_TRIGGER_HEARTBEAT=y
CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
CONFIG_COMMON_CLK_DEBUG=y
# CONFIG_IOMMU_SUPPORT is not set
+CONFIG_TMPFS=y
+CONFIG_NFS_FS=y
+CONFIG_ROOT_NFS=y
CONFIG_NLS=y
+CONFIG_PRINTK_TIME=y
diff --git a/arch/arm/configs/u8500_defconfig b/arch/arm/configs/u8500_defconfig
index ac632cc38f24..c6ebc184bf68 100644
--- a/arch/arm/configs/u8500_defconfig
+++ b/arch/arm/configs/u8500_defconfig
@@ -22,6 +22,7 @@ CONFIG_CMDLINE="root=/dev/ram0 console=ttyAMA2,115200n8"
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
CONFIG_CPU_IDLE=y
+CONFIG_ARM_U8500_CPUIDLE=y
CONFIG_VFP=y
CONFIG_NEON=y
CONFIG_PM_RUNTIME=y
@@ -109,6 +110,8 @@ CONFIG_EXT2_FS_SECURITY=y
CONFIG_EXT3_FS=y
CONFIG_EXT4_FS=y
CONFIG_VFAT_FS=y
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
# CONFIG_MISC_FILESYSTEMS is not set
diff --git a/arch/arm/mach-at91/pm.h b/arch/arm/mach-at91/pm.h
index 3ed190ce062b..c5101dcb4fb0 100644
--- a/arch/arm/mach-at91/pm.h
+++ b/arch/arm/mach-at91/pm.h
@@ -16,7 +16,11 @@
#include <mach/at91_ramc.h>
#include <mach/at91rm9200_sdramc.h>
+#ifdef CONFIG_PM
extern void at91_pm_set_standby(void (*at91_standby)(void));
+#else
+static inline void at91_pm_set_standby(void (*at91_standby)(void)) { }
+#endif
/*
* The AT91RM9200 goes into self-refresh mode with this command, and will
diff --git a/arch/arm/mach-at91/sama5d3.c b/arch/arm/mach-at91/sama5d3.c
index 3ea86428ee09..a28873fe3049 100644
--- a/arch/arm/mach-at91/sama5d3.c
+++ b/arch/arm/mach-at91/sama5d3.c
@@ -95,19 +95,19 @@ static struct clk twi0_clk = {
.name = "twi0_clk",
.pid = SAMA5D3_ID_TWI0,
.type = CLK_TYPE_PERIPHERAL,
- .div = AT91_PMC_PCR_DIV2,
+ .div = AT91_PMC_PCR_DIV8,
};
static struct clk twi1_clk = {
.name = "twi1_clk",
.pid = SAMA5D3_ID_TWI1,
.type = CLK_TYPE_PERIPHERAL,
- .div = AT91_PMC_PCR_DIV2,
+ .div = AT91_PMC_PCR_DIV8,
};
static struct clk twi2_clk = {
.name = "twi2_clk",
.pid = SAMA5D3_ID_TWI2,
.type = CLK_TYPE_PERIPHERAL,
- .div = AT91_PMC_PCR_DIV2,
+ .div = AT91_PMC_PCR_DIV8,
};
static struct clk mmc0_clk = {
.name = "mci0_clk",
diff --git a/arch/arm/mach-omap2/dss-common.c b/arch/arm/mach-omap2/dss-common.c
index 365bfd3d9c68..dadccc91488c 100644
--- a/arch/arm/mach-omap2/dss-common.c
+++ b/arch/arm/mach-omap2/dss-common.c
@@ -223,7 +223,7 @@ void __init omap_4430sdp_display_init_of(void)
static struct connector_dvi_platform_data omap3_igep2_dvi_connector_pdata = {
.name = "dvi",
.source = "tfp410.0",
- .i2c_bus_num = 3,
+ .i2c_bus_num = 2,
};
static struct platform_device omap3_igep2_dvi_connector_device = {
diff --git a/arch/arm/mach-omap2/pdata-quirks.c b/arch/arm/mach-omap2/pdata-quirks.c
index 10c71450cf63..39f020c982e8 100644
--- a/arch/arm/mach-omap2/pdata-quirks.c
+++ b/arch/arm/mach-omap2/pdata-quirks.c
@@ -139,6 +139,7 @@ struct of_dev_auxdata omap_auxdata_lookup[] __initdata = {
static struct pdata_init pdata_quirks[] __initdata = {
#ifdef CONFIG_ARCH_OMAP3
+ { "nokia,omap3-n900", hsmmc2_internal_input_clk, },
{ "nokia,omap3-n9", hsmmc2_internal_input_clk, },
{ "nokia,omap3-n950", hsmmc2_internal_input_clk, },
{ "isee,omap3-igep0020", omap3_igep0020_legacy_init, },
diff --git a/arch/arm/mach-omap2/powerdomain.c b/arch/arm/mach-omap2/powerdomain.c
index e233dfcbc186..93a2a6e4260f 100644
--- a/arch/arm/mach-omap2/powerdomain.c
+++ b/arch/arm/mach-omap2/powerdomain.c
@@ -128,7 +128,8 @@ skip_voltdm:
for (i = 0; i < pwrdm->banks; i++)
pwrdm->ret_mem_off_counter[i] = 0;
- arch_pwrdm->pwrdm_wait_transition(pwrdm);
+ if (arch_pwrdm && arch_pwrdm->pwrdm_wait_transition)
+ arch_pwrdm->pwrdm_wait_transition(pwrdm);
pwrdm->state = pwrdm_read_pwrst(pwrdm);
pwrdm->state_counter[pwrdm->state] = 1;
diff --git a/arch/arm/mach-socfpga/Kconfig b/arch/arm/mach-socfpga/Kconfig
index 037100a1563a..aee77f06f887 100644
--- a/arch/arm/mach-socfpga/Kconfig
+++ b/arch/arm/mach-socfpga/Kconfig
@@ -10,6 +10,7 @@ config ARCH_SOCFPGA
select GENERIC_CLOCKEVENTS
select GPIO_PL061 if GPIOLIB
select HAVE_ARM_SCU
+ select HAVE_ARM_TWD if SMP
select HAVE_SMP
select MFD_SYSCON
select SPARSE_IRQ
diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c
index 2e85c1e72535..12c7e5c03ea4 100644
--- a/arch/arm/mach-ux500/cpu-db8500.c
+++ b/arch/arm/mach-ux500/cpu-db8500.c
@@ -140,6 +140,10 @@ static struct of_dev_auxdata u8500_auxdata_lookup[] __initdata = {
/* Requires call-back bindings. */
OF_DEV_AUXDATA("arm,cortex-a9-pmu", 0, "arm-pmu", &db8500_pmu_platdata),
/* Requires DMA bindings. */
+ OF_DEV_AUXDATA("arm,pl18x", 0x80126000, "sdi0", &mop500_sdi0_data),
+ OF_DEV_AUXDATA("arm,pl18x", 0x80118000, "sdi1", &mop500_sdi1_data),
+ OF_DEV_AUXDATA("arm,pl18x", 0x80005000, "sdi2", &mop500_sdi2_data),
+ OF_DEV_AUXDATA("arm,pl18x", 0x80114000, "sdi4", &mop500_sdi4_data),
OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80123000,
"ux500-msp-i2s.0", &msp0_platform_data),
OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80124000,
diff --git a/arch/arm/plat-omap/include/plat/dmtimer.h b/arch/arm/plat-omap/include/plat/dmtimer.h
index fb92abb91628..2861b155485a 100644
--- a/arch/arm/plat-omap/include/plat/dmtimer.h
+++ b/arch/arm/plat-omap/include/plat/dmtimer.h
@@ -336,8 +336,11 @@ static inline void __omap_dm_timer_enable_posted(struct omap_dm_timer *timer)
if (timer->posted)
return;
- if (timer->errata & OMAP_TIMER_ERRATA_I103_I767)
+ if (timer->errata & OMAP_TIMER_ERRATA_I103_I767) {
+ timer->posted = OMAP_TIMER_NONPOSTED;
+ __omap_dm_timer_write(timer, OMAP_TIMER_IF_CTRL_REG, 0, 0);
return;
+ }
__omap_dm_timer_write(timer, OMAP_TIMER_IF_CTRL_REG,
OMAP_TIMER_CTRL_POSTED, 0);
diff --git a/drivers/mmc/host/omap.c b/drivers/mmc/host/omap.c
index 0b10a9030f4e..98b6b6ef7e5c 100644
--- a/drivers/mmc/host/omap.c
+++ b/drivers/mmc/host/omap.c
@@ -22,6 +22,7 @@
#include <linux/delay.h>
#include <linux/spinlock.h>
#include <linux/timer.h>
+#include <linux/of.h>
#include <linux/omap-dma.h>
#include <linux/mmc/host.h>
#include <linux/mmc/card.h>
@@ -90,17 +91,6 @@
#define OMAP_MMC_CMDTYPE_AC 2
#define OMAP_MMC_CMDTYPE_ADTC 3
-#define OMAP_DMA_MMC_TX 21
-#define OMAP_DMA_MMC_RX 22
-#define OMAP_DMA_MMC2_TX 54
-#define OMAP_DMA_MMC2_RX 55
-
-#define OMAP24XX_DMA_MMC2_TX 47
-#define OMAP24XX_DMA_MMC2_RX 48
-#define OMAP24XX_DMA_MMC1_TX 61
-#define OMAP24XX_DMA_MMC1_RX 62
-
-
#define DRIVER_NAME "mmci-omap"
/* Specifies how often in millisecs to poll for card status changes
@@ -1330,7 +1320,7 @@ static int mmc_omap_probe(struct platform_device *pdev)
struct mmc_omap_host *host = NULL;
struct resource *res;
dma_cap_mask_t mask;
- unsigned sig;
+ unsigned sig = 0;
int i, ret = 0;
int irq;
@@ -1340,7 +1330,7 @@ static int mmc_omap_probe(struct platform_device *pdev)
}
if (pdata->nr_slots == 0) {
dev_err(&pdev->dev, "no slots\n");
- return -ENXIO;
+ return -EPROBE_DEFER;
}
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
@@ -1407,19 +1397,20 @@ static int mmc_omap_probe(struct platform_device *pdev)
host->dma_tx_burst = -1;
host->dma_rx_burst = -1;
- if (mmc_omap2())
- sig = host->id == 0 ? OMAP24XX_DMA_MMC1_TX : OMAP24XX_DMA_MMC2_TX;
- else
- sig = host->id == 0 ? OMAP_DMA_MMC_TX : OMAP_DMA_MMC2_TX;
- host->dma_tx = dma_request_channel(mask, omap_dma_filter_fn, &sig);
+ res = platform_get_resource_byname(pdev, IORESOURCE_DMA, "tx");
+ if (res)
+ sig = res->start;
+ host->dma_tx = dma_request_slave_channel_compat(mask,
+ omap_dma_filter_fn, &sig, &pdev->dev, "tx");
if (!host->dma_tx)
dev_warn(host->dev, "unable to obtain TX DMA engine channel %u\n",
sig);
- if (mmc_omap2())
- sig = host->id == 0 ? OMAP24XX_DMA_MMC1_RX : OMAP24XX_DMA_MMC2_RX;
- else
- sig = host->id == 0 ? OMAP_DMA_MMC_RX : OMAP_DMA_MMC2_RX;
- host->dma_rx = dma_request_channel(mask, omap_dma_filter_fn, &sig);
+
+ res = platform_get_resource_byname(pdev, IORESOURCE_DMA, "rx");
+ if (res)
+ sig = res->start;
+ host->dma_rx = dma_request_slave_channel_compat(mask,
+ omap_dma_filter_fn, &sig, &pdev->dev, "rx");
if (!host->dma_rx)
dev_warn(host->dev, "unable to obtain RX DMA engine channel %u\n",
sig);
@@ -1512,12 +1503,20 @@ static int mmc_omap_remove(struct platform_device *pdev)
return 0;
}
+#if IS_BUILTIN(CONFIG_OF)
+static const struct of_device_id mmc_omap_match[] = {
+ { .compatible = "ti,omap2420-mmc", },
+ { },
+};
+#endif
+
static struct platform_driver mmc_omap_driver = {
.probe = mmc_omap_probe,
.remove = mmc_omap_remove,
.driver = {
.name = DRIVER_NAME,
.owner = THIS_MODULE,
+ .of_match_table = of_match_ptr(mmc_omap_match),
},
};