[ARM] 5097/1: Tosa: support TC6393XB device

Add definitions for Toshiba TC6393XB companion chip and register
the tc6393xb device.

Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

3 files changed, 158 insertions, 14 deletions

diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c
index 7a89f764acf3..2fe0998ac3fb 100644
--- a/arch/arm/mach-pxa/tosa.c
+++ b/arch/arm/mach-pxa/tosa.c
@@ -18,7 +18,10 @@
 #include <linux/major.h>
 #include <linux/fs.h>
 #include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/fb.h>
 #include <linux/mmc/host.h>
+#include <linux/mfd/tc6393xb.h>
 #include <linux/pm.h>
 #include <linux/delay.h>
 #include <linux/gpio_keys.h>
@@ -509,9 +512,127 @@ static struct platform_device tosaled_device = {
 	},
 };
 
+/*
+ * Toshiba Mobile IO Controller
+ */
+static struct resource tc6393xb_resources[] = {
+	[0] = {
+		.start	= TOSA_LCDC_PHYS,
+		.end	= TOSA_LCDC_PHYS + 0x3ffffff,
+		.flags	= IORESOURCE_MEM,
+	},
+
+	[1] = {
+		.start	= TOSA_IRQ_GPIO_TC6393XB_INT,
+		.end	= TOSA_IRQ_GPIO_TC6393XB_INT,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+
+static int tosa_tc6393xb_enable(struct platform_device *dev)
+{
+	int rc;
+
+	rc = gpio_request(TOSA_GPIO_TC6393XB_REST_IN, "tc6393xb #pclr");
+	if (rc)
+		goto err_req_pclr;
+	rc = gpio_request(TOSA_GPIO_TC6393XB_SUSPEND, "tc6393xb #suspend");
+	if (rc)
+		goto err_req_suspend;
+	rc = gpio_request(TOSA_GPIO_TC6393XB_L3V_ON, "l3v");
+	if (rc)
+		goto err_req_l3v;
+	rc = gpio_direction_output(TOSA_GPIO_TC6393XB_L3V_ON, 0);
+	if (rc)
+		goto err_dir_l3v;
+	rc = gpio_direction_output(TOSA_GPIO_TC6393XB_SUSPEND, 0);
+	if (rc)
+		goto err_dir_suspend;
+	rc = gpio_direction_output(TOSA_GPIO_TC6393XB_REST_IN, 0);
+	if (rc)
+		goto err_dir_pclr;
+
+	mdelay(1);
+
+	gpio_set_value(TOSA_GPIO_TC6393XB_SUSPEND, 1);
+
+	mdelay(10);
+
+	gpio_set_value(TOSA_GPIO_TC6393XB_REST_IN, 1);
+	gpio_set_value(TOSA_GPIO_TC6393XB_L3V_ON, 1);
+
+	return 0;
+err_dir_pclr:
+err_dir_suspend:
+err_dir_l3v:
+	gpio_free(TOSA_GPIO_TC6393XB_L3V_ON);
+err_req_l3v:
+	gpio_free(TOSA_GPIO_TC6393XB_SUSPEND);
+err_req_suspend:
+	gpio_free(TOSA_GPIO_TC6393XB_REST_IN);
+err_req_pclr:
+	return rc;
+}
+
+static int tosa_tc6393xb_disable(struct platform_device *dev)
+{
+	gpio_free(TOSA_GPIO_TC6393XB_L3V_ON);
+	gpio_free(TOSA_GPIO_TC6393XB_SUSPEND);
+	gpio_free(TOSA_GPIO_TC6393XB_REST_IN);
+
+	return 0;
+}
+
+static int tosa_tc6393xb_resume(struct platform_device *dev)
+{
+	gpio_set_value(TOSA_GPIO_TC6393XB_SUSPEND, 1);
+	mdelay(10);
+	gpio_set_value(TOSA_GPIO_TC6393XB_L3V_ON, 1);
+	mdelay(10);
+
+	return 0;
+}
+
+static int tosa_tc6393xb_suspend(struct platform_device *dev)
+{
+	gpio_set_value(TOSA_GPIO_TC6393XB_L3V_ON, 0);
+	gpio_set_value(TOSA_GPIO_TC6393XB_SUSPEND, 0);
+	return 0;
+}
+
+static struct tc6393xb_platform_data tosa_tc6393xb_setup = {
+	.scr_pll2cr	= 0x0cc1,
+	.scr_gper	= 0x3300,
+	.scr_gpo_dsr	=
+		TOSA_TC6393XB_GPIO_BIT(TOSA_GPIO_CARD_VCC_ON),
+	.scr_gpo_doecr	=
+		TOSA_TC6393XB_GPIO_BIT(TOSA_GPIO_CARD_VCC_ON),
+
+	.irq_base	= IRQ_BOARD_START,
+	.gpio_base	= TOSA_TC6393XB_GPIO_BASE,
+
+	.enable		= tosa_tc6393xb_enable,
+	.disable	= tosa_tc6393xb_disable,
+	.suspend	= tosa_tc6393xb_suspend,
+	.resume		= tosa_tc6393xb_resume,
+};
+
+
+static struct platform_device tc6393xb_device = {
+	.name	= "tc6393xb",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &tosa_tc6393xb_setup,
+	},
+	.num_resources	= ARRAY_SIZE(tc6393xb_resources),
+	.resource	= tc6393xb_resources,
+};
+
 static struct platform_device *devices[] __initdata = {
 	&tosascoop_device,
 	&tosascoop_jc_device,
+	&tc6393xb_device,
 	&tosakbd_device,
 	&tosa_gpio_keys_device,
 	&tosaled_device,
@@ -533,6 +654,8 @@ static void tosa_restart(char mode)
 
 static void __init tosa_init(void)
 {
+	int dummy;
+
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(tosa_pin_config));
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(tosa_pin_irda_off));
 	gpio_set_wake(MFP_PIN_GPIO1, 1);
@@ -548,6 +671,10 @@ static void __init tosa_init(void)
 	/* enable batt_fault */
 	PMCR = 0x01;
 
+	dummy = gpiochip_reserve(TOSA_SCOOP_GPIO_BASE, 12);
+	dummy = gpiochip_reserve(TOSA_SCOOP_JC_GPIO_BASE, 12);
+	dummy = gpiochip_reserve(TOSA_TC6393XB_GPIO_BASE, 16);
+
 	pxa_set_mci_info(&tosa_mci_platform_data);
 	pxa_set_udc_info(&udc_info);
 	pxa_set_ficp_info(&tosa_ficp_platform_data);
diff --git a/include/asm-arm/arch-pxa/irqs.h b/include/asm-arm/arch-pxa/irqs.h
index b6c8fe377683..fa05e76f64e8 100644
--- a/include/asm-arm/arch-pxa/irqs.h
+++ b/include/asm-arm/arch-pxa/irqs.h
@@ -180,6 +180,7 @@
 #define NR_IRQS			(IRQ_LOCOMO_SPI_TEND + 1)
 #elif defined(CONFIG_ARCH_LUBBOCK) || \
       defined(CONFIG_MACH_LOGICPD_PXA270) || \
+      defined(CONFIG_MACH_TOSA) || \
       defined(CONFIG_MACH_MAINSTONE) || \
       defined(CONFIG_MACH_PCM027) || \
       defined(CONFIG_MACH_MAGICIAN)
diff --git a/include/asm-arm/arch-pxa/tosa.h b/include/asm-arm/arch-pxa/tosa.h
index 188226216154..a16c103b7251 100644
--- a/include/asm-arm/arch-pxa/tosa.h
+++ b/include/asm-arm/arch-pxa/tosa.h
@@ -25,7 +25,7 @@
  */
 #define TOSA_SCOOP_GPIO_BASE		NR_BUILTIN_GPIO
 #define TOSA_SCOOP_PXA_VCORE1		SCOOP_GPCR_PA11
-#define TOSA_SCOOP_TC6393_REST_IN	SCOOP_GPCR_PA12
+#define TOSA_GPIO_TC6393XB_REST_IN	(TOSA_SCOOP_GPIO_BASE + 1)
 #define TOSA_GPIO_IR_POWERDWN		(TOSA_SCOOP_GPIO_BASE + 2)
 #define TOSA_GPIO_SD_WP			(TOSA_SCOOP_GPIO_BASE + 3)
 #define TOSA_GPIO_PWR_ON		(TOSA_SCOOP_GPIO_BASE + 4)
@@ -35,11 +35,9 @@
 #define TOSA_SCOOP_AC_IN_OL		SCOOP_GPCR_PA19
 
 /* GPIO Direction   1 : output mode / 0:input mode */
-#define TOSA_SCOOP_IO_DIR     ( TOSA_SCOOP_PXA_VCORE1 | TOSA_SCOOP_TC6393_REST_IN | \
+#define TOSA_SCOOP_IO_DIR     (TOSA_SCOOP_PXA_VCORE1 | \
 		TOSA_SCOOP_AUD_PWR_ON |\
-		TOSA_SCOOP_BT_RESET | TOSA_SCOOP_BT_PWR_EN )
-/* GPIO out put level when init   1: Hi */
-#define TOSA_SCOOP_IO_OUT     ( TOSA_SCOOP_TC6393_REST_IN )
+		TOSA_SCOOP_BT_RESET | TOSA_SCOOP_BT_PWR_EN)
 
 /*
  * SCOOP2 jacket GPIOs
@@ -49,16 +47,34 @@
 #define TOSA_GPIO_NOTE_LED		(TOSA_SCOOP_JC_GPIO_BASE + 1)
 #define TOSA_GPIO_CHRG_ERR_LED		(TOSA_SCOOP_JC_GPIO_BASE + 2)
 #define TOSA_GPIO_USB_PULLUP		(TOSA_SCOOP_JC_GPIO_BASE + 3)
-#define TOSA_SCOOP_JC_TC6393_SUSPEND	SCOOP_GPCR_PA15
-#define TOSA_SCOOP_JC_TC3693_L3V_ON	SCOOP_GPCR_PA16
+#define TOSA_GPIO_TC6393XB_SUSPEND	(TOSA_SCOOP_JC_GPIO_BASE + 4)
+#define TOSA_GPIO_TC6393XB_L3V_ON	(TOSA_SCOOP_JC_GPIO_BASE + 5)
 #define TOSA_SCOOP_JC_WLAN_DETECT	SCOOP_GPCR_PA17
 #define TOSA_GPIO_WLAN_LED		(TOSA_SCOOP_JC_GPIO_BASE + 7)
 #define TOSA_SCOOP_JC_CARD_LIMIT_SEL	SCOOP_GPCR_PA19
 
 /* GPIO Direction   1 : output mode / 0:input mode */
-#define TOSA_SCOOP_JC_IO_DIR ( \
-		TOSA_SCOOP_JC_TC6393_SUSPEND | TOSA_SCOOP_JC_TC3693_L3V_ON | \
-		TOSA_SCOOP_JC_CARD_LIMIT_SEL )
+#define TOSA_SCOOP_JC_IO_DIR (TOSA_SCOOP_JC_CARD_LIMIT_SEL)
+
+/*
+ * TC6393XB GPIOs
+ */
+#define TOSA_TC6393XB_GPIO_BASE		(NR_BUILTIN_GPIO + 2 * 12)
+#define TOSA_TC6393XB_GPIO(i)		(TOSA_TC6393XB_GPIO_BASE + (i))
+#define TOSA_TC6393XB_GPIO_BIT(gpio)	(1 << (gpio - TOSA_TC6393XB_GPIO_BASE))
+
+#define TOSA_GPIO_TG_ON			(TOSA_TC6393XB_GPIO_BASE + 0)
+#define TOSA_GPIO_L_MUTE		(TOSA_TC6393XB_GPIO_BASE + 1)
+#define TOSA_GPIO_BL_C20MA		(TOSA_TC6393XB_GPIO_BASE + 3)
+#define TOSA_GPIO_CARD_VCC_ON		(TOSA_TC6393XB_GPIO_BASE + 4)
+#define TOSA_GPIO_CHARGE_OFF		(TOSA_TC6393XB_GPIO_BASE + 6)
+#define TOSA_GPIO_CHARGE_OFF_JC		(TOSA_TC6393XB_GPIO_BASE + 7)
+#define TOSA_GPIO_BAT0_V_ON		(TOSA_TC6393XB_GPIO_BASE + 9)
+#define TOSA_GPIO_BAT1_V_ON		(TOSA_TC6393XB_GPIO_BASE + 10)
+#define TOSA_GPIO_BU_CHRG_ON		(TOSA_TC6393XB_GPIO_BASE + 11)
+#define TOSA_GPIO_BAT_SW_ON		(TOSA_TC6393XB_GPIO_BASE + 12)
+#define TOSA_GPIO_BAT0_TH_ON		(TOSA_TC6393XB_GPIO_BASE + 14)
+#define TOSA_GPIO_BAT1_TH_ON		(TOSA_TC6393XB_GPIO_BASE + 15)
 
 /*
  * Timing Generator
@@ -84,13 +100,13 @@
 #define TOSA_GPIO_JACKET_DETECT		(7)
 #define TOSA_GPIO_nSD_DETECT		(9)
 #define TOSA_GPIO_nSD_INT		(10)
-#define TOSA_GPIO_TC6393_CLK		(11)
+#define TOSA_GPIO_TC6393XB_CLK		(11)
 #define TOSA_GPIO_BAT1_CRG		(12)
 #define TOSA_GPIO_CF_CD			(13)
 #define TOSA_GPIO_BAT0_CRG		(14)
-#define TOSA_GPIO_TC6393_INT		(15)
+#define TOSA_GPIO_TC6393XB_INT		(15)
 #define TOSA_GPIO_BAT0_LOW		(17)
-#define TOSA_GPIO_TC6393_RDY		(18)
+#define TOSA_GPIO_TC6393XB_RDY		(18)
 #define TOSA_GPIO_ON_RESET		(19)
 #define TOSA_GPIO_EAR_IN		(20)
 #define TOSA_GPIO_CF_IRQ		(21)	/* CF slot0 Ready */
@@ -138,7 +154,7 @@
 #define TOSA_IRQ_GPIO_BAT1_CRG      	IRQ_GPIO(TOSA_GPIO_BAT1_CRG)
 #define TOSA_IRQ_GPIO_CF_CD         	IRQ_GPIO(TOSA_GPIO_CF_CD)
 #define TOSA_IRQ_GPIO_BAT0_CRG      	IRQ_GPIO(TOSA_GPIO_BAT0_CRG)
-#define TOSA_IRQ_GPIO_TC6393_INT    	IRQ_GPIO(TOSA_GPIO_TC6393_INT)
+#define TOSA_IRQ_GPIO_TC6393XB_INT    	IRQ_GPIO(TOSA_GPIO_TC6393XB_INT)
 #define TOSA_IRQ_GPIO_BAT0_LOW      	IRQ_GPIO(TOSA_GPIO_BAT0_LOW)
 #define TOSA_IRQ_GPIO_EAR_IN        	IRQ_GPIO(TOSA_GPIO_EAR_IN)
 #define TOSA_IRQ_GPIO_CF_IRQ        	IRQ_GPIO(TOSA_GPIO_CF_IRQ)