Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lrg/voltage-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lrg/voltage-2.6:
  regulator: Add MODULE_DEVICE_TABLE to max8997 and max8998
  regulator: fix tps6524x section mismatch
  regulator: Remove more wm831x-specific IRQ operations
  regulator: add ab8500 enable and raise time delays
  regulator: provide consumer interface for fall/rise time
  regulator: add set_voltage_time_sel infrastructure
  regulator: initialization for ab8500 regulators
  regulator: add support for USB voltage regulator
  regulator: switch the ab3100 to use enable_time()
  Regulator: add suspend-finish API for regulator core.
  regulator: fix typo in Kconfig
  regulator: Convert WM831x regulators to genirq
  regulator: If we fail when setting up a supply say which supply

17 files changed, 509 insertions, 65 deletions

diff --git a/arch/arm/mach-ux500/board-mop500-regulators.h b/arch/arm/mach-ux500/board-mop500-regulators.h
index 2675fae52537..f979b892e4fa 100644
--- a/arch/arm/mach-ux500/board-mop500-regulators.h
+++ b/arch/arm/mach-ux500/board-mop500-regulators.h
@@ -14,6 +14,8 @@
 #include <linux/regulator/machine.h>
 #include <linux/regulator/ab8500.h>
 
+extern struct ab8500_regulator_reg_init
+ab8500_regulator_reg_init[AB8500_NUM_REGULATOR_REGISTERS];
 extern struct regulator_init_data ab8500_regulators[AB8500_NUM_REGULATORS];
 
 #endif
diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c
index 8790d984cac8..d0076453d7ff 100644
--- a/arch/arm/mach-ux500/board-mop500.c
+++ b/arch/arm/mach-ux500/board-mop500.c
@@ -20,6 +20,7 @@
 #include <linux/amba/serial.h>
 #include <linux/spi/spi.h>
 #include <linux/mfd/ab8500.h>
+#include <linux/regulator/ab8500.h>
 #include <linux/mfd/tc3589x.h>
 #include <linux/leds-lp5521.h>
 #include <linux/input.h>
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index de75f67f4cc3..b9f29e0d4295 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -126,7 +126,7 @@ config REGULATOR_MAX8998
 	  and S5PC1XX chips to control VCC_CORE and VCC_USIM voltages.
 
 config REGULATOR_TWL4030
-	bool "TI TWL4030/TWL5030/TWL6030/TPS695x0 PMIC"
+	bool "TI TWL4030/TWL5030/TWL6030/TPS659x0 PMIC"
 	depends on TWL4030_CORE
 	help
 	  This driver supports the voltage regulators provided by
diff --git a/drivers/regulator/ab3100.c b/drivers/regulator/ab3100.c
index 2dec589a8908..b1d77946e9c6 100644
--- a/drivers/regulator/ab3100.c
+++ b/drivers/regulator/ab3100.c
@@ -206,29 +206,6 @@ static int ab3100_enable_regulator(struct regulator_dev *reg)
 		return err;
 	}
 
-	/* Per-regulator power on delay from spec */
-	switch (abreg->regreg) {
-	case AB3100_LDO_A: /* Fallthrough */
-	case AB3100_LDO_C: /* Fallthrough */
-	case AB3100_LDO_D: /* Fallthrough */
-	case AB3100_LDO_E: /* Fallthrough */
-	case AB3100_LDO_H: /* Fallthrough */
-	case AB3100_LDO_K:
-		udelay(200);
-		break;
-	case AB3100_LDO_F:
-		udelay(600);
-		break;
-	case AB3100_LDO_G:
-		udelay(400);
-		break;
-	case AB3100_BUCK:
-		mdelay(1);
-		break;
-	default:
-		break;
-	}
-
 	return 0;
 }
 
@@ -450,11 +427,37 @@ static int ab3100_get_voltage_regulator_external(struct regulator_dev *reg)
 	return abreg->plfdata->external_voltage;
 }
 
+static int ab3100_enable_time_regulator(struct regulator_dev *reg)
+{
+	struct ab3100_regulator *abreg = reg->reg_data;
+
+	/* Per-regulator power on delay from spec */
+	switch (abreg->regreg) {
+	case AB3100_LDO_A: /* Fallthrough */
+	case AB3100_LDO_C: /* Fallthrough */
+	case AB3100_LDO_D: /* Fallthrough */
+	case AB3100_LDO_E: /* Fallthrough */
+	case AB3100_LDO_H: /* Fallthrough */
+	case AB3100_LDO_K:
+		return 200;
+	case AB3100_LDO_F:
+		return 600;
+	case AB3100_LDO_G:
+		return 400;
+	case AB3100_BUCK:
+		return 1000;
+	default:
+		break;
+	}
+	return 0;
+}
+
 static struct regulator_ops regulator_ops_fixed = {
 	.enable      = ab3100_enable_regulator,
 	.disable     = ab3100_disable_regulator,
 	.is_enabled  = ab3100_is_enabled_regulator,
 	.get_voltage = ab3100_get_voltage_regulator,
+	.enable_time = ab3100_enable_time_regulator,
 };
 
 static struct regulator_ops regulator_ops_variable = {
@@ -464,6 +467,7 @@ static struct regulator_ops regulator_ops_variable = {
 	.get_voltage = ab3100_get_voltage_regulator,
 	.set_voltage = ab3100_set_voltage_regulator,
 	.list_voltage = ab3100_list_voltage_regulator,
+	.enable_time = ab3100_enable_time_regulator,
 };
 
 static struct regulator_ops regulator_ops_variable_sleepable = {
@@ -474,6 +478,7 @@ static struct regulator_ops regulator_ops_variable_sleepable = {
 	.set_voltage = ab3100_set_voltage_regulator,
 	.set_suspend_voltage = ab3100_set_suspend_voltage_regulator,
 	.list_voltage = ab3100_list_voltage_regulator,
+	.enable_time = ab3100_enable_time_regulator,
 };
 
 /*
diff --git a/drivers/regulator/ab8500.c b/drivers/regulator/ab8500.c
index d9a052c53aec..02f3c2333c83 100644
--- a/drivers/regulator/ab8500.c
+++ b/drivers/regulator/ab8500.c
@@ -9,7 +9,7 @@
  * AB8500 peripheral regulators
  *
  * AB8500 supports the following regulators:
- *   VAUX1/2/3, VINTCORE, VTVOUT, VAUDIO, VAMIC1/2, VDMIC, VANA
+ *   VAUX1/2/3, VINTCORE, VTVOUT, VUSB, VAUDIO, VAMIC1/2, VDMIC, VANA
  */
 #include <linux/init.h>
 #include <linux/kernel.h>
@@ -38,6 +38,7 @@
  * @voltage_mask: mask to control regulator voltage
  * @voltages: supported voltage table
  * @voltages_len: number of supported voltages for the regulator
+ * @delay: startup/set voltage delay in us
  */
 struct ab8500_regulator_info {
 	struct device		*dev;
@@ -55,6 +56,7 @@ struct ab8500_regulator_info {
 	u8 voltage_mask;
 	int const *voltages;
 	int voltages_len;
+	unsigned int delay;
 };
 
 /* voltage tables for the vauxn/vintcore supplies */
@@ -290,6 +292,29 @@ static int ab8500_regulator_set_voltage(struct regulator_dev *rdev,
 	return ret;
 }
 
+static int ab8500_regulator_enable_time(struct regulator_dev *rdev)
+{
+	struct ab8500_regulator_info *info = rdev_get_drvdata(rdev);
+
+	return info->delay;
+}
+
+static int ab8500_regulator_set_voltage_time_sel(struct regulator_dev *rdev,
+					     unsigned int old_sel,
+					     unsigned int new_sel)
+{
+	struct ab8500_regulator_info *info = rdev_get_drvdata(rdev);
+	int ret;
+
+	/* If the regulator isn't on, it won't take time here */
+	ret = ab8500_regulator_is_enabled(rdev);
+	if (ret < 0)
+		return ret;
+	if (!ret)
+		return 0;
+	return info->delay;
+}
+
 static struct regulator_ops ab8500_regulator_ops = {
 	.enable		= ab8500_regulator_enable,
 	.disable	= ab8500_regulator_disable,
@@ -297,6 +322,8 @@ static struct regulator_ops ab8500_regulator_ops = {
 	.get_voltage	= ab8500_regulator_get_voltage,
 	.set_voltage	= ab8500_regulator_set_voltage,
 	.list_voltage	= ab8500_list_voltage,
+	.enable_time	= ab8500_regulator_enable_time,
+	.set_voltage_time_sel = ab8500_regulator_set_voltage_time_sel,
 };
 
 static int ab8500_fixed_get_voltage(struct regulator_dev *rdev)
@@ -317,6 +344,8 @@ static struct regulator_ops ab8500_regulator_fixed_ops = {
 	.is_enabled	= ab8500_regulator_is_enabled,
 	.get_voltage	= ab8500_fixed_get_voltage,
 	.list_voltage	= ab8500_list_voltage,
+	.enable_time	= ab8500_regulator_enable_time,
+	.set_voltage_time_sel = ab8500_regulator_set_voltage_time_sel,
 };
 
 static struct ab8500_regulator_info
@@ -426,12 +455,28 @@ static struct ab8500_regulator_info
 			.owner		= THIS_MODULE,
 			.n_voltages	= 1,
 		},
+		.delay			= 10000,
 		.fixed_uV		= 2000000,
 		.update_bank		= 0x03,
 		.update_reg		= 0x80,
 		.update_mask		= 0x82,
 		.update_val_enable	= 0x02,
 	},
+	[AB8500_LDO_USB] = {
+		.desc = {
+			.name           = "LDO-USB",
+			.ops            = &ab8500_regulator_fixed_ops,
+			.type           = REGULATOR_VOLTAGE,
+			.id             = AB8500_LDO_USB,
+			.owner          = THIS_MODULE,
+			.n_voltages     = 1,
+		},
+		.fixed_uV               = 3300000,
+		.update_bank            = 0x03,
+		.update_reg             = 0x82,
+		.update_mask            = 0x03,
+		.update_val_enable      = 0x01,
+	},
 	[AB8500_LDO_AUDIO] = {
 		.desc = {
 			.name		= "LDO-AUDIO",
@@ -511,6 +556,186 @@ static struct ab8500_regulator_info
 
 };
 
+struct ab8500_reg_init {
+	u8 bank;
+	u8 addr;
+	u8 mask;
+};
+
+#define REG_INIT(_id, _bank, _addr, _mask)	\
+	[_id] = {				\
+		.bank = _bank,			\
+		.addr = _addr,			\
+		.mask = _mask,			\
+	}
+
+static struct ab8500_reg_init ab8500_reg_init[] = {
+	/*
+	 * 0x30, VanaRequestCtrl
+	 * 0x0C, VpllRequestCtrl
+	 * 0xc0, VextSupply1RequestCtrl
+	 */
+	REG_INIT(AB8500_REGUREQUESTCTRL2,	0x03, 0x04, 0xfc),
+	/*
+	 * 0x03, VextSupply2RequestCtrl
+	 * 0x0c, VextSupply3RequestCtrl
+	 * 0x30, Vaux1RequestCtrl
+	 * 0xc0, Vaux2RequestCtrl
+	 */
+	REG_INIT(AB8500_REGUREQUESTCTRL3,	0x03, 0x05, 0xff),
+	/*
+	 * 0x03, Vaux3RequestCtrl
+	 * 0x04, SwHPReq
+	 */
+	REG_INIT(AB8500_REGUREQUESTCTRL4,	0x03, 0x06, 0x07),
+	/*
+	 * 0x08, VanaSysClkReq1HPValid
+	 * 0x20, Vaux1SysClkReq1HPValid
+	 * 0x40, Vaux2SysClkReq1HPValid
+	 * 0x80, Vaux3SysClkReq1HPValid
+	 */
+	REG_INIT(AB8500_REGUSYSCLKREQ1HPVALID1,	0x03, 0x07, 0xe8),
+	/*
+	 * 0x10, VextSupply1SysClkReq1HPValid
+	 * 0x20, VextSupply2SysClkReq1HPValid
+	 * 0x40, VextSupply3SysClkReq1HPValid
+	 */
+	REG_INIT(AB8500_REGUSYSCLKREQ1HPVALID2,	0x03, 0x08, 0x70),
+	/*
+	 * 0x08, VanaHwHPReq1Valid
+	 * 0x20, Vaux1HwHPReq1Valid
+	 * 0x40, Vaux2HwHPReq1Valid
+	 * 0x80, Vaux3HwHPReq1Valid
+	 */
+	REG_INIT(AB8500_REGUHWHPREQ1VALID1,	0x03, 0x09, 0xe8),
+	/*
+	 * 0x01, VextSupply1HwHPReq1Valid
+	 * 0x02, VextSupply2HwHPReq1Valid
+	 * 0x04, VextSupply3HwHPReq1Valid
+	 */
+	REG_INIT(AB8500_REGUHWHPREQ1VALID2,	0x03, 0x0a, 0x07),
+	/*
+	 * 0x08, VanaHwHPReq2Valid
+	 * 0x20, Vaux1HwHPReq2Valid
+	 * 0x40, Vaux2HwHPReq2Valid
+	 * 0x80, Vaux3HwHPReq2Valid
+	 */
+	REG_INIT(AB8500_REGUHWHPREQ2VALID1,	0x03, 0x0b, 0xe8),
+	/*
+	 * 0x01, VextSupply1HwHPReq2Valid
+	 * 0x02, VextSupply2HwHPReq2Valid
+	 * 0x04, VextSupply3HwHPReq2Valid
+	 */
+	REG_INIT(AB8500_REGUHWHPREQ2VALID2,	0x03, 0x0c, 0x07),
+	/*
+	 * 0x20, VanaSwHPReqValid
+	 * 0x80, Vaux1SwHPReqValid
+	 */
+	REG_INIT(AB8500_REGUSWHPREQVALID1,	0x03, 0x0d, 0xa0),
+	/*
+	 * 0x01, Vaux2SwHPReqValid
+	 * 0x02, Vaux3SwHPReqValid
+	 * 0x04, VextSupply1SwHPReqValid
+	 * 0x08, VextSupply2SwHPReqValid
+	 * 0x10, VextSupply3SwHPReqValid
+	 */
+	REG_INIT(AB8500_REGUSWHPREQVALID2,	0x03, 0x0e, 0x1f),
+	/*
+	 * 0x02, SysClkReq2Valid1
+	 * ...
+	 * 0x80, SysClkReq8Valid1
+	 */
+	REG_INIT(AB8500_REGUSYSCLKREQVALID1,	0x03, 0x0f, 0xfe),
+	/*
+	 * 0x02, SysClkReq2Valid2
+	 * ...
+	 * 0x80, SysClkReq8Valid2
+	 */
+	REG_INIT(AB8500_REGUSYSCLKREQVALID2,	0x03, 0x10, 0xfe),
+	/*
+	 * 0x02, VTVoutEna
+	 * 0x04, Vintcore12Ena
+	 * 0x38, Vintcore12Sel
+	 * 0x40, Vintcore12LP
+	 * 0x80, VTVoutLP
+	 */
+	REG_INIT(AB8500_REGUMISC1,		0x03, 0x80, 0xfe),
+	/*
+	 * 0x02, VaudioEna
+	 * 0x04, VdmicEna
+	 * 0x08, Vamic1Ena
+	 * 0x10, Vamic2Ena
+	 */
+	REG_INIT(AB8500_VAUDIOSUPPLY,		0x03, 0x83, 0x1e),
+	/*
+	 * 0x01, Vamic1_dzout
+	 * 0x02, Vamic2_dzout
+	 */
+	REG_INIT(AB8500_REGUCTRL1VAMIC,		0x03, 0x84, 0x03),
+	/*
+	 * 0x0c, VanaRegu
+	 * 0x03, VpllRegu
+	 */
+	REG_INIT(AB8500_VPLLVANAREGU,		0x04, 0x06, 0x0f),
+	/*
+	 * 0x01, VrefDDREna
+	 * 0x02, VrefDDRSleepMode
+	 */
+	REG_INIT(AB8500_VREFDDR,		0x04, 0x07, 0x03),
+	/*
+	 * 0x03, VextSupply1Regu
+	 * 0x0c, VextSupply2Regu
+	 * 0x30, VextSupply3Regu
+	 * 0x40, ExtSupply2Bypass
+	 * 0x80, ExtSupply3Bypass
+	 */
+	REG_INIT(AB8500_EXTSUPPLYREGU,		0x04, 0x08, 0xff),
+	/*
+	 * 0x03, Vaux1Regu
+	 * 0x0c, Vaux2Regu
+	 */
+	REG_INIT(AB8500_VAUX12REGU,		0x04, 0x09, 0x0f),
+	/*
+	 * 0x03, Vaux3Regu
+	 */
+	REG_INIT(AB8500_VRF1VAUX3REGU,		0x04, 0x0a, 0x03),
+	/*
+	 * 0x3f, Vsmps1Sel1
+	 */
+	REG_INIT(AB8500_VSMPS1SEL1,		0x04, 0x13, 0x3f),
+	/*
+	 * 0x0f, Vaux1Sel
+	 */
+	REG_INIT(AB8500_VAUX1SEL,		0x04, 0x1f, 0x0f),
+	/*
+	 * 0x0f, Vaux2Sel
+	 */
+	REG_INIT(AB8500_VAUX2SEL,		0x04, 0x20, 0x0f),
+	/*
+	 * 0x07, Vaux3Sel
+	 */
+	REG_INIT(AB8500_VRF1VAUX3SEL,		0x04, 0x21, 0x07),
+	/*
+	 * 0x01, VextSupply12LP
+	 */
+	REG_INIT(AB8500_REGUCTRL2SPARE,		0x04, 0x22, 0x01),
+	/*
+	 * 0x04, Vaux1Disch
+	 * 0x08, Vaux2Disch
+	 * 0x10, Vaux3Disch
+	 * 0x20, Vintcore12Disch
+	 * 0x40, VTVoutDisch
+	 * 0x80, VaudioDisch
+	 */
+	REG_INIT(AB8500_REGUCTRLDISCH,		0x04, 0x43, 0xfc),
+	/*
+	 * 0x02, VanaDisch
+	 * 0x04, VdmicPullDownEna
+	 * 0x10, VdmicDisch
+	 */
+	REG_INIT(AB8500_REGUCTRLDISCH2,		0x04, 0x44, 0x16),
+};
+
 static __devinit int ab8500_regulator_probe(struct platform_device *pdev)
 {
 	struct ab8500 *ab8500 = dev_get_drvdata(pdev->dev.parent);
@@ -529,10 +754,51 @@ static __devinit int ab8500_regulator_probe(struct platform_device *pdev)
 
 	/* make sure the platform data has the correct size */
 	if (pdata->num_regulator != ARRAY_SIZE(ab8500_regulator_info)) {
-		dev_err(&pdev->dev, "platform configuration error\n");
+		dev_err(&pdev->dev, "Configuration error: size mismatch.\n");
 		return -EINVAL;
 	}
 
+	/* initialize registers */
+	for (i = 0; i < pdata->num_regulator_reg_init; i++) {
+		int id;
+		u8 value;
+
+		id = pdata->regulator_reg_init[i].id;
+		value = pdata->regulator_reg_init[i].value;
+
+		/* check for configuration errors */
+		if (id >= AB8500_NUM_REGULATOR_REGISTERS) {
+			dev_err(&pdev->dev,
+				"Configuration error: id outside range.\n");
+			return -EINVAL;
+		}
+		if (value & ~ab8500_reg_init[id].mask) {
+			dev_err(&pdev->dev,
+				"Configuration error: value outside mask.\n");
+			return -EINVAL;
+		}
+
+		/* initialize register */
+		err = abx500_mask_and_set_register_interruptible(&pdev->dev,
+			ab8500_reg_init[id].bank,
+			ab8500_reg_init[id].addr,
+			ab8500_reg_init[id].mask,
+			value);
+		if (err < 0) {
+			dev_err(&pdev->dev,
+				"Failed to initialize 0x%02x, 0x%02x.\n",
+				ab8500_reg_init[id].bank,
+				ab8500_reg_init[id].addr);
+			return err;
+		}
+		dev_vdbg(&pdev->dev,
+			"  init: 0x%02x, 0x%02x, 0x%02x, 0x%02x\n",
+			ab8500_reg_init[id].bank,
+			ab8500_reg_init[id].addr,
+			ab8500_reg_init[id].mask,
+			value);
+	}
+
 	/* register all regulators */
 	for (i = 0; i < ARRAY_SIZE(ab8500_regulator_info); i++) {
 		struct ab8500_regulator_info *info = NULL;
diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c
index 9fa20957847d..3ffc6979d164 100644
--- a/drivers/regulator/core.c
+++ b/drivers/regulator/core.c
@@ -1629,6 +1629,7 @@ static int _regulator_do_set_voltage(struct regulator_dev *rdev,
 				     int min_uV, int max_uV)
 {
 	int ret;
+	int delay = 0;
 	unsigned int selector;
 
 	trace_regulator_set_voltage(rdev_get_name(rdev), min_uV, max_uV);
@@ -1662,6 +1663,22 @@ static int _regulator_do_set_voltage(struct regulator_dev *rdev,
 			}
 		}
 
+		/*
+		 * If we can't obtain the old selector there is not enough
+		 * info to call set_voltage_time_sel().
+		 */
+		if (rdev->desc->ops->set_voltage_time_sel &&
+		    rdev->desc->ops->get_voltage_sel) {
+			unsigned int old_selector = 0;
+
+			ret = rdev->desc->ops->get_voltage_sel(rdev);
+			if (ret < 0)
+				return ret;
+			old_selector = ret;
+			delay = rdev->desc->ops->set_voltage_time_sel(rdev,
+						old_selector, selector);
+		}
+
 		if (best_val != INT_MAX) {
 			ret = rdev->desc->ops->set_voltage_sel(rdev, selector);
 			selector = best_val;
@@ -1672,6 +1689,14 @@ static int _regulator_do_set_voltage(struct regulator_dev *rdev,
 		ret = -EINVAL;
 	}
 
+	/* Insert any necessary delays */
+	if (delay >= 1000) {
+		mdelay(delay / 1000);
+		udelay(delay % 1000);
+	} else if (delay) {
+		udelay(delay);
+	}
+
 	if (ret == 0)
 		_notifier_call_chain(rdev, REGULATOR_EVENT_VOLTAGE_CHANGE,
 				     NULL);
@@ -1740,6 +1765,51 @@ out:
 EXPORT_SYMBOL_GPL(regulator_set_voltage);
 
 /**
+ * regulator_set_voltage_time - get raise/fall time
+ * @regulator: regulator source
+ * @old_uV: starting voltage in microvolts
+ * @new_uV: target voltage in microvolts
+ *
+ * Provided with the starting and ending voltage, this function attempts to
+ * calculate the time in microseconds required to rise or fall to this new
+ * voltage.
+ */
+int regulator_set_voltage_time(struct regulator *regulator,
+			       int old_uV, int new_uV)
+{
+	struct regulator_dev	*rdev = regulator->rdev;
+	struct regulator_ops	*ops = rdev->desc->ops;
+	int old_sel = -1;
+	int new_sel = -1;
+	int voltage;
+	int i;
+
+	/* Currently requires operations to do this */
+	if (!ops->list_voltage || !ops->set_voltage_time_sel
+	    || !rdev->desc->n_voltages)
+		return -EINVAL;
+
+	for (i = 0; i < rdev->desc->n_voltages; i++) {
+		/* We only look for exact voltage matches here */
+		voltage = regulator_list_voltage(regulator, i);
+		if (voltage < 0)
+			return -EINVAL;
+		if (voltage == 0)
+			continue;
+		if (voltage == old_uV)
+			old_sel = i;
+		if (voltage == new_uV)
+			new_sel = i;
+	}
+
+	if (old_sel < 0 || new_sel < 0)
+		return -EINVAL;
+
+	return ops->set_voltage_time_sel(rdev, old_sel, new_sel);
+}
+EXPORT_SYMBOL_GPL(regulator_set_voltage_time);
+
+/**
  * regulator_sync_voltage - re-apply last regulator output voltage
  * @regulator: regulator source
  *
@@ -2565,8 +2635,11 @@ struct regulator_dev *regulator_register(struct regulator_desc *regulator_desc,
 			init_data->consumer_supplies[i].dev,
 			init_data->consumer_supplies[i].dev_name,
 			init_data->consumer_supplies[i].supply);
-		if (ret < 0)
+		if (ret < 0) {
+			dev_err(dev, "Failed to set supply %s\n",
+				init_data->consumer_supplies[i].supply);
 			goto unset_supplies;
+		}
 	}
 
 	list_add(&rdev->list, &regulator_list);
@@ -2653,6 +2726,47 @@ out:
 EXPORT_SYMBOL_GPL(regulator_suspend_prepare);
 
 /**
+ * regulator_suspend_finish - resume regulators from system wide suspend
+ *
+ * Turn on regulators that might be turned off by regulator_suspend_prepare
+ * and that should be turned on according to the regulators properties.
+ */
+int regulator_suspend_finish(void)
+{
+	struct regulator_dev *rdev;
+	int ret = 0, error;
+
+	mutex_lock(&regulator_list_mutex);
+	list_for_each_entry(rdev, &regulator_list, list) {
+		struct regulator_ops *ops = rdev->desc->ops;
+
+		mutex_lock(&rdev->mutex);
+		if ((rdev->use_count > 0  || rdev->constraints->always_on) &&
+				ops->enable) {
+			error = ops->enable(rdev);
+			if (error)
+				ret = error;
+		} else {
+			if (!has_full_constraints)
+				goto unlock;
+			if (!ops->disable)
+				goto unlock;
+			if (ops->is_enabled && !ops->is_enabled(rdev))
+				goto unlock;
+
+			error = ops->disable(rdev);
+			if (error)
+				ret = error;
+		}
+unlock:
+		mutex_unlock(&rdev->mutex);
+	}
+	mutex_unlock(&regulator_list_mutex);
+	return ret;
+}
+EXPORT_SYMBOL_GPL(regulator_suspend_finish);
+
+/**
  * regulator_has_full_constraints - the system has fully specified constraints
  *
  * Calling this function will cause the regulator API to disable all
diff --git a/drivers/regulator/max8997.c b/drivers/regulator/max8997.c
index 01ef7e9903bb..77e0cfb30b23 100644
--- a/drivers/regulator/max8997.c
+++ b/drivers/regulator/max8997.c
@@ -1185,6 +1185,7 @@ static const struct platform_device_id max8997_pmic_id[] = {
 	{ "max8997-pmic", 0},
 	{ },
 };
+MODULE_DEVICE_TABLE(platform, max8997_pmic_id);
 
 static struct platform_driver max8997_pmic_driver = {
 	.driver = {
diff --git a/drivers/regulator/max8998.c b/drivers/regulator/max8998.c
index 0ec49ca527a8..43410266f993 100644
--- a/drivers/regulator/max8998.c
+++ b/drivers/regulator/max8998.c
@@ -887,6 +887,7 @@ static const struct platform_device_id max8998_pmic_id[] = {
 	{ "lp3974-pmic", TYPE_LP3974 },
 	{ }
 };
+MODULE_DEVICE_TABLE(platform, max8998_pmic_id);
 
 static struct platform_driver max8998_pmic_driver = {
 	.driver = {
diff --git a/drivers/regulator/tps6524x-regulator.c b/drivers/regulator/tps6524x-regulator.c
index 176a6be5a8ce..9166aa0a9df7 100644
--- a/drivers/regulator/tps6524x-regulator.c
+++ b/drivers/regulator/tps6524x-regulator.c
@@ -596,7 +596,7 @@ static struct regulator_ops regulator_ops = {
 	.get_current_limit	= get_current_limit,
 };
 
-static int __devexit pmic_remove(struct spi_device *spi)
+static int pmic_remove(struct spi_device *spi)
 {
 	struct tps6524x *hw = spi_get_drvdata(spi);
 	int i;
diff --git a/drivers/regulator/wm831x-dcdc.c b/drivers/regulator/wm831x-dcdc.c
index 06df898842c0..e93453b1b978 100644
--- a/drivers/regulator/wm831x-dcdc.c
+++ b/drivers/regulator/wm831x-dcdc.c
@@ -565,9 +565,8 @@ static __devinit int wm831x_buckv_probe(struct platform_device *pdev)
 	}
 
 	irq = platform_get_irq_byname(pdev, "UV");
-	ret = wm831x_request_irq(wm831x, irq, wm831x_dcdc_uv_irq,
-				 IRQF_TRIGGER_RISING, dcdc->name,
-				 dcdc);
+	ret = request_threaded_irq(irq, NULL, wm831x_dcdc_uv_irq,
+				   IRQF_TRIGGER_RISING, dcdc->name, dcdc);
 	if (ret != 0) {
 		dev_err(&pdev->dev, "Failed to request UV IRQ %d: %d\n",
 			irq, ret);
@@ -575,9 +574,8 @@ static __devinit int wm831x_buckv_probe(struct platform_device *pdev)
 	}
 
 	irq = platform_get_irq_byname(pdev, "HC");
-	ret = wm831x_request_irq(wm831x, irq, wm831x_dcdc_oc_irq,
-				 IRQF_TRIGGER_RISING, dcdc->name,
-				 dcdc);
+	ret = request_threaded_irq(irq, NULL, wm831x_dcdc_oc_irq,
+				   IRQF_TRIGGER_RISING, dcdc->name, dcdc);
 	if (ret != 0) {
 		dev_err(&pdev->dev, "Failed to request HC IRQ %d: %d\n",
 			irq, ret);
@@ -589,7 +587,7 @@ static __devinit int wm831x_buckv_probe(struct platform_device *pdev)
 	return 0;
 
 err_uv:
-	wm831x_free_irq(wm831x, platform_get_irq_byname(pdev, "UV"), dcdc);
+	free_irq(platform_get_irq_byname(pdev, "UV"), dcdc);
 err_regulator:
 	regulator_unregister(dcdc->regulator);
 err:
@@ -606,8 +604,8 @@ static __devexit int wm831x_buckv_remove(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, NULL);
 
-	wm831x_free_irq(wm831x, platform_get_irq_byname(pdev, "HC"), dcdc);
-	wm831x_free_irq(wm831x, platform_get_irq_byname(pdev, "UV"), dcdc);
+	free_irq(platform_get_irq_byname(pdev, "HC"), dcdc);
+	free_irq(platform_get_irq_byname(pdev, "UV"), dcdc);
 	regulator_unregister(dcdc->regulator);
 	if (dcdc->dvs_gpio)
 		gpio_free(dcdc->dvs_gpio);
@@ -756,9 +754,8 @@ static __devinit int wm831x_buckp_probe(struct platform_device *pdev)
 	}
 
 	irq = platform_get_irq_byname(pdev, "UV");
-	ret = wm831x_request_irq(wm831x, irq, wm831x_dcdc_uv_irq,
-				 IRQF_TRIGGER_RISING, dcdc->name,
-				 dcdc);
+	ret = request_threaded_irq(irq, NULL, wm831x_dcdc_uv_irq,
+				   IRQF_TRIGGER_RISING,	dcdc->name, dcdc);
 	if (ret != 0) {
 		dev_err(&pdev->dev, "Failed to request UV IRQ %d: %d\n",
 			irq, ret);
@@ -783,7 +780,7 @@ static __devexit int wm831x_buckp_remove(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, NULL);
 
-	wm831x_free_irq(wm831x, platform_get_irq_byname(pdev, "UV"), dcdc);
+	free_irq(platform_get_irq_byname(pdev, "UV"), dcdc);
 	regulator_unregister(dcdc->regulator);
 	kfree(dcdc);
 
@@ -885,9 +882,9 @@ static __devinit int wm831x_boostp_probe(struct platform_device *pdev)
 	}
 
 	irq = platform_get_irq_byname(pdev, "UV");
-	ret = wm831x_request_irq(wm831x, irq, wm831x_dcdc_uv_irq,
-				 IRQF_TRIGGER_RISING, dcdc->name,
-				 dcdc);
+	ret = request_threaded_irq(irq, NULL, wm831x_dcdc_uv_irq,
+				   IRQF_TRIGGER_RISING, dcdc->name,
+				   dcdc);
 	if (ret != 0) {
 		dev_err(&pdev->dev, "Failed to request UV IRQ %d: %d\n",
 			irq, ret);
@@ -908,11 +905,10 @@ err:
 static __devexit int wm831x_boostp_remove(struct platform_device *pdev)
 {
 	struct wm831x_dcdc *dcdc = platform_get_drvdata(pdev);
-	struct wm831x *wm831x = dcdc->wm831x;
 
 	platform_set_drvdata(pdev, NULL);
 
-	wm831x_free_irq(wm831x, platform_get_irq_byname(pdev, "UV"), dcdc);
+	free_irq(platform_get_irq_byname(pdev, "UV"), dcdc);
 	regulator_unregister(dcdc->regulator);
 	kfree(dcdc);
 
diff --git a/drivers/regulator/wm831x-isink.c b/drivers/regulator/wm831x-isink.c
index 6c446cd6ad54..01f27c7f4236 100644
--- a/drivers/regulator/wm831x-isink.c
+++ b/drivers/regulator/wm831x-isink.c
@@ -198,9 +198,8 @@ static __devinit int wm831x_isink_probe(struct platform_device *pdev)
 	}
 
 	irq = platform_get_irq(pdev, 0);
-	ret = wm831x_request_irq(wm831x, irq, wm831x_isink_irq,
-				 IRQF_TRIGGER_RISING, isink->name,
-				 isink);
+	ret = request_threaded_irq(irq, NULL, wm831x_isink_irq,
+				   IRQF_TRIGGER_RISING, isink->name, isink);
 	if (ret != 0) {
 		dev_err(&pdev->dev, "Failed to request ISINK IRQ %d: %d\n",
 			irq, ret);
@@ -221,11 +220,10 @@ err:
 static __devexit int wm831x_isink_remove(struct platform_device *pdev)
 {
 	struct wm831x_isink *isink = platform_get_drvdata(pdev);
-	struct wm831x *wm831x = isink->wm831x;
 
 	platform_set_drvdata(pdev, NULL);
 
-	wm831x_free_irq(wm831x, platform_get_irq(pdev, 0), isink);
+	free_irq(platform_get_irq(pdev, 0), isink);
 
 	regulator_unregister(isink->regulator);
 	kfree(isink);
diff --git a/drivers/regulator/wm831x-ldo.c b/drivers/regulator/wm831x-ldo.c
index c94fc5b7cd5b..2220cf8defb1 100644
--- a/drivers/regulator/wm831x-ldo.c
+++ b/drivers/regulator/wm831x-ldo.c
@@ -354,9 +354,9 @@ static __devinit int wm831x_gp_ldo_probe(struct platform_device *pdev)
 	}
 
 	irq = platform_get_irq_byname(pdev, "UV");
-	ret = wm831x_request_irq(wm831x, irq, wm831x_ldo_uv_irq,
-				 IRQF_TRIGGER_RISING, ldo->name,
-				 ldo);
+	ret = request_threaded_irq(irq, NULL, wm831x_ldo_uv_irq,
+				   IRQF_TRIGGER_RISING, ldo->name,
+				   ldo);
 	if (ret != 0) {
 		dev_err(&pdev->dev, "Failed to request UV IRQ %d: %d\n",
 			irq, ret);
@@ -377,11 +377,10 @@ err:
 static __devexit int wm831x_gp_ldo_remove(struct platform_device *pdev)
 {
 	struct wm831x_ldo *ldo = platform_get_drvdata(pdev);
-	struct wm831x *wm831x = ldo->wm831x;
 
 	platform_set_drvdata(pdev, NULL);
 
-	wm831x_free_irq(wm831x, platform_get_irq_byname(pdev, "UV"), ldo);
+	free_irq(platform_get_irq_byname(pdev, "UV"), ldo);
 	regulator_unregister(ldo->regulator);
 	kfree(ldo);
 
@@ -619,9 +618,8 @@ static __devinit int wm831x_aldo_probe(struct platform_device *pdev)
 	}
 
 	irq = platform_get_irq_byname(pdev, "UV");
-	ret = wm831x_request_irq(wm831x, irq, wm831x_ldo_uv_irq,
-				 IRQF_TRIGGER_RISING, ldo->name,
-				 ldo);
+	ret = request_threaded_irq(irq, NULL, wm831x_ldo_uv_irq,
+				   IRQF_TRIGGER_RISING, ldo->name, ldo);
 	if (ret != 0) {
 		dev_err(&pdev->dev, "Failed to request UV IRQ %d: %d\n",
 			irq, ret);
@@ -642,9 +640,8 @@ err:
 static __devexit int wm831x_aldo_remove(struct platform_device *pdev)
 {
 	struct wm831x_ldo *ldo = platform_get_drvdata(pdev);
-	struct wm831x *wm831x = ldo->wm831x;
 
-	wm831x_free_irq(wm831x, platform_get_irq_byname(pdev, "UV"), ldo);
+	free_irq(platform_get_irq_byname(pdev, "UV"), ldo);
 	regulator_unregister(ldo->regulator);
 	kfree(ldo);
 
diff --git a/include/linux/mfd/ab8500.h b/include/linux/mfd/ab8500.h
index 56f8dea72152..6e4f77ef4d20 100644
--- a/include/linux/mfd/ab8500.h
+++ b/include/linux/mfd/ab8500.h
@@ -139,17 +139,23 @@ struct ab8500 {
 	u8 oldmask[AB8500_NUM_IRQ_REGS];
 };
 
+struct regulator_reg_init;
 struct regulator_init_data;
 
 /**
  * struct ab8500_platform_data - AB8500 platform data
  * @irq_base: start of AB8500 IRQs, AB8500_NR_IRQS will be used
  * @init: board-specific initialization after detection of ab8500
+ * @num_regulator_reg_init: number of regulator init registers
+ * @regulator_reg_init: regulator init registers
+ * @num_regulator: number of regulators
  * @regulator: machine-specific constraints for regulators
  */
 struct ab8500_platform_data {
 	int irq_base;
 	void (*init) (struct ab8500 *);
+	int num_regulator_reg_init;
+	struct ab8500_regulator_reg_init *regulator_reg_init;
 	int num_regulator;
 	struct regulator_init_data *regulator;
 };
diff --git a/include/linux/regulator/ab8500.h b/include/linux/regulator/ab8500.h
index 6a210f1511fc..76579f964a29 100644
--- a/include/linux/regulator/ab8500.h
+++ b/include/linux/regulator/ab8500.h
@@ -3,8 +3,8 @@
  *
  * License Terms: GNU General Public License v2
  *
- * Author: Sundar Iyer <sundar.iyer@stericsson.com> for ST-Ericsson
- *
+ * Authors: Sundar Iyer <sundar.iyer@stericsson.com> for ST-Ericsson
+ *          Bengt Jonsson <bengt.g.jonsson@stericsson.com> for ST-Ericsson
  */
 
 #ifndef __LINUX_MFD_AB8500_REGULATOR_H
@@ -17,6 +17,7 @@ enum ab8500_regulator_id {
 	AB8500_LDO_AUX3,
 	AB8500_LDO_INTCORE,
 	AB8500_LDO_TVOUT,
+	AB8500_LDO_USB,
 	AB8500_LDO_AUDIO,
 	AB8500_LDO_ANAMIC1,
 	AB8500_LDO_ANAMIC2,
@@ -24,4 +25,50 @@ enum ab8500_regulator_id {
 	AB8500_LDO_ANA,
 	AB8500_NUM_REGULATORS,
 };
+
+/* AB8500 register initialization */
+struct ab8500_regulator_reg_init {
+	int id;
+	u8 value;
+};
+
+#define INIT_REGULATOR_REGISTER(_id, _value)	\
+	{					\
+		.id = _id,			\
+		.value = _value,		\
+	}
+
+/* AB8500 registers */
+enum ab8500_regulator_reg {
+	AB8500_REGUREQUESTCTRL2,
+	AB8500_REGUREQUESTCTRL3,
+	AB8500_REGUREQUESTCTRL4,
+	AB8500_REGUSYSCLKREQ1HPVALID1,
+	AB8500_REGUSYSCLKREQ1HPVALID2,
+	AB8500_REGUHWHPREQ1VALID1,
+	AB8500_REGUHWHPREQ1VALID2,
+	AB8500_REGUHWHPREQ2VALID1,
+	AB8500_REGUHWHPREQ2VALID2,
+	AB8500_REGUSWHPREQVALID1,
+	AB8500_REGUSWHPREQVALID2,
+	AB8500_REGUSYSCLKREQVALID1,
+	AB8500_REGUSYSCLKREQVALID2,
+	AB8500_REGUMISC1,
+	AB8500_VAUDIOSUPPLY,
+	AB8500_REGUCTRL1VAMIC,
+	AB8500_VPLLVANAREGU,
+	AB8500_VREFDDR,
+	AB8500_EXTSUPPLYREGU,
+	AB8500_VAUX12REGU,
+	AB8500_VRF1VAUX3REGU,
+	AB8500_VAUX1SEL,
+	AB8500_VAUX2SEL,
+	AB8500_VRF1VAUX3SEL,
+	AB8500_REGUCTRL2SPARE,
+	AB8500_REGUCTRLDISCH,
+	AB8500_REGUCTRLDISCH2,
+	AB8500_VSMPS1SEL1,
+	AB8500_NUM_REGULATOR_REGISTERS,
+};
+
 #endif
diff --git a/include/linux/regulator/consumer.h b/include/linux/regulator/consumer.h
index 7954f6bd7edb..9e87c1cb7270 100644
--- a/include/linux/regulator/consumer.h
+++ b/include/linux/regulator/consumer.h
@@ -153,6 +153,8 @@ int regulator_list_voltage(struct regulator *regulator, unsigned selector);
 int regulator_is_supported_voltage(struct regulator *regulator,
 				   int min_uV, int max_uV);
 int regulator_set_voltage(struct regulator *regulator, int min_uV, int max_uV);
+int regulator_set_voltage_time(struct regulator *regulator,
+			       int old_uV, int new_uV);
 int regulator_get_voltage(struct regulator *regulator);
 int regulator_sync_voltage(struct regulator *regulator);
 int regulator_set_current_limit(struct regulator *regulator,
diff --git a/include/linux/regulator/driver.h b/include/linux/regulator/driver.h
index b8ed16a33c47..6c433b89c80d 100644
--- a/include/linux/regulator/driver.h
+++ b/include/linux/regulator/driver.h
@@ -63,7 +63,11 @@ enum regulator_status {
  *                    when running with the specified parameters.
  *
  * @enable_time: Time taken for the regulator voltage output voltage to
- *               stabalise after being enabled, in microseconds.
+ *               stabilise after being enabled, in microseconds.
+ * @set_voltage_time_sel: Time taken for the regulator voltage output voltage
+ *               to stabilise after being set to a new value, in microseconds.
+ *               The function provides the from and to voltage selector, the
+ *               function should return the worst case.
  *
  * @set_suspend_voltage: Set the voltage for the regulator when the system
  *                       is suspended.
@@ -103,8 +107,11 @@ struct regulator_ops {
 	int (*set_mode) (struct regulator_dev *, unsigned int mode);
 	unsigned int (*get_mode) (struct regulator_dev *);
 
-	/* Time taken to enable the regulator */
+	/* Time taken to enable or set voltage on the regulator */
 	int (*enable_time) (struct regulator_dev *);
+	int (*set_voltage_time_sel) (struct regulator_dev *,
+				     unsigned int old_selector,
+				     unsigned int new_selector);
 
 	/* report regulator status ... most other accessors report
 	 * control inputs, this reports results of combining inputs
diff --git a/include/linux/regulator/machine.h b/include/linux/regulator/machine.h
index 761c745b9c24..c4c4fc45f856 100644
--- a/include/linux/regulator/machine.h
+++ b/include/linux/regulator/machine.h
@@ -186,6 +186,7 @@ struct regulator_init_data {
 };
 
 int regulator_suspend_prepare(suspend_state_t state);
+int regulator_suspend_finish(void);
 
 #ifdef CONFIG_REGULATOR
 void regulator_has_full_constraints(void);