summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2016-03-15 21:44:47 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2016-03-15 21:44:47 -0700
commitf0718cea471265fe69017191429979ba1a54b9e0 (patch)
tree6ddc525a4229c0106bf0dafae345c3a4d11d2be3
parent555f8160b2c36dfa071c043b54d4b1edca7e07b4 (diff)
parent630300d5fcb6ee9c32c75d8b576c100fbb794159 (diff)
downloadlinux-f0718cea471265fe69017191429979ba1a54b9e0.tar.bz2
Merge tag 'hwmon-for-linus-v4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon updates from Guenter Roeck: - New drivers for NSA320 and LTC2990 - Added support for ADM1278 to adm1275 driver - Added support for ncpXXxh103 to ntc_thermistor driver - Renamed vexpress hwmon implementation - Minor cleanups and improvements * tag 'hwmon-for-linus-v4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: Create an NSA320 hardware monitoring driver hwmon: Define binding for the nsa320-hwmon driver hwmon: (adm1275) Add support for ADM1278 hwmon: (ntc_thermistor) Add support for ncpXXxh103 Doc: hwmon: Fix typo "montoring" in hwmon ARM: dts: vfxxx: Add iio_hwmon node for ADC temperature channel ARM: dts: Change iio_hwmon nodes to use hypen in node names hwmon: (iio_hwmon) Allow the driver to accept hypen in device tree node names hwmon: Add LTC2990 sensor driver hwmon: (vexpress) rename vexpress hwmon implementation
-rw-r--r--Documentation/devicetree/bindings/hwmon/nsa320-mcu.txt20
-rw-r--r--Documentation/devicetree/bindings/hwmon/ntc_thermistor.txt1
-rw-r--r--Documentation/devicetree/bindings/iio/iio-bindings.txt2
-rw-r--r--Documentation/hwmon/adm127529
-rw-r--r--Documentation/hwmon/lm250662
-rw-r--r--Documentation/hwmon/ltc299043
-rw-r--r--Documentation/hwmon/max160642
-rw-r--r--Documentation/hwmon/max344402
-rw-r--r--Documentation/hwmon/max86882
-rw-r--r--Documentation/hwmon/nsa32053
-rw-r--r--Documentation/hwmon/ntc_thermistor4
-rw-r--r--Documentation/hwmon/pmbus2
-rw-r--r--Documentation/hwmon/zl61002
-rw-r--r--arch/arm/boot/dts/imx23.dtsi2
-rw-r--r--arch/arm/boot/dts/imx28.dtsi2
-rw-r--r--arch/arm/boot/dts/vfxxx.dtsi5
-rw-r--r--drivers/hwmon/Kconfig31
-rw-r--r--drivers/hwmon/Makefile4
-rw-r--r--drivers/hwmon/iio_hwmon.c11
-rw-r--r--drivers/hwmon/ltc2990.c161
-rw-r--r--drivers/hwmon/nsa320-hwmon.c215
-rw-r--r--drivers/hwmon/ntc_thermistor.c44
-rw-r--r--drivers/hwmon/pmbus/Kconfig4
-rw-r--r--drivers/hwmon/pmbus/adm1275.c56
-rw-r--r--drivers/hwmon/vexpress-hwmon.c (renamed from drivers/hwmon/vexpress.c)0
-rw-r--r--include/linux/platform_data/ntc_thermistor.h1
26 files changed, 677 insertions, 23 deletions
diff --git a/Documentation/devicetree/bindings/hwmon/nsa320-mcu.txt b/Documentation/devicetree/bindings/hwmon/nsa320-mcu.txt
new file mode 100644
index 000000000000..0863e067c85b
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/nsa320-mcu.txt
@@ -0,0 +1,20 @@
+Bindings for the fan / temperature monitor microcontroller used on
+the Zyxel NSA 320 and several subsequent models.
+
+Required properties:
+- compatible : "zyxel,nsa320-mcu"
+- data-gpios : The GPIO pin connected to the data line on the MCU
+- clk-gpios : The GPIO pin connected to the clock line on the MCU
+- act-gpios : The GPIO pin connected to the active line on the MCU
+
+Example:
+
+ hwmon {
+ compatible = "zyxel,nsa320-mcu";
+ pinctrl-0 = <&pmx_mcu_data &pmx_mcu_clk &pmx_mcu_act>;
+ pinctrl-names = "default";
+
+ data-gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
+ clk-gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
+ act-gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
+ };
diff --git a/Documentation/devicetree/bindings/hwmon/ntc_thermistor.txt b/Documentation/devicetree/bindings/hwmon/ntc_thermistor.txt
index a04a80f9cc70..c3b9c4cfe8df 100644
--- a/Documentation/devicetree/bindings/hwmon/ntc_thermistor.txt
+++ b/Documentation/devicetree/bindings/hwmon/ntc_thermistor.txt
@@ -10,6 +10,7 @@ Requires node properties:
"murata,ncp03wb473"
"murata,ncp15wl333"
"murata,ncp03wf104"
+ "murata,ncp15xh103"
/* Usage of vendor name "ntc" is deprecated */
<DEPRECATED> "ntc,ncp15wb473"
diff --git a/Documentation/devicetree/bindings/iio/iio-bindings.txt b/Documentation/devicetree/bindings/iio/iio-bindings.txt
index 0b447d9ad196..68d6f8ce063b 100644
--- a/Documentation/devicetree/bindings/iio/iio-bindings.txt
+++ b/Documentation/devicetree/bindings/iio/iio-bindings.txt
@@ -82,7 +82,7 @@ vdd channel is connected to output 0 of the &ref device.
...
- iio_hwmon {
+ iio-hwmon {
compatible = "iio-hwmon";
io-channels = <&adc 0>, <&adc 1>, <&adc 2>,
<&adc 3>, <&adc 4>, <&adc 5>,
diff --git a/Documentation/hwmon/adm1275 b/Documentation/hwmon/adm1275
index d697229e3c18..791bc0bd91e6 100644
--- a/Documentation/hwmon/adm1275
+++ b/Documentation/hwmon/adm1275
@@ -14,6 +14,10 @@ Supported chips:
Prefix: 'adm1276'
Addresses scanned: -
Datasheet: www.analog.com/static/imported-files/data_sheets/ADM1276.pdf
+ * Analog Devices ADM1278
+ Prefix: 'adm1278'
+ Addresses scanned: -
+ Datasheet: www.analog.com/static/imported-files/data_sheets/ADM1278.pdf
* Analog Devices ADM1293/ADM1294
Prefix: 'adm1293', 'adm1294'
Addresses scanned: -
@@ -25,13 +29,15 @@ Author: Guenter Roeck <linux@roeck-us.net>
Description
-----------
-This driver supports hardware montoring for Analog Devices ADM1075, ADM1275,
-ADM1276, ADM1293, and ADM1294 Hot-Swap Controller and Digital Power Monitors.
+This driver supports hardware monitoring for Analog Devices ADM1075, ADM1275,
+ADM1276, ADM1278, ADM1293, and ADM1294 Hot-Swap Controller and Digital
+Power Monitors.
-ADM1075, ADM1275, ADM1276, ADM1293, and ADM1294 are hot-swap controllers that
-allow a circuit board to be removed from or inserted into a live backplane.
-They also feature current and voltage readback via an integrated 12
-bit analog-to-digital converter (ADC), accessed using a PMBus interface.
+ADM1075, ADM1275, ADM1276, ADM1278, ADM1293, and ADM1294 are hot-swap
+controllers that allow a circuit board to be removed from or inserted into
+a live backplane. They also feature current and voltage readback via an
+integrated 12 bit analog-to-digital converter (ADC), accessed using a
+PMBus interface.
The driver is a client driver to the core PMBus driver. Please see
Documentation/hwmon/pmbus for details on PMBus client drivers.
@@ -96,3 +102,14 @@ power1_reset_history Write any value to reset history.
Power attributes are supported on ADM1075, ADM1276,
ADM1293, and ADM1294.
+
+temp1_input Chip temperature.
+ Temperature attributes are only available on ADM1278.
+temp1_max Maximum chip temperature.
+temp1_max_alarm Temperature alarm.
+temp1_crit Critical chip temperature.
+temp1_crit_alarm Critical temperature high alarm.
+temp1_highest Highest observed temperature.
+temp1_reset_history Write any value to reset history.
+
+ Temperature attributes are supported on ADM1278.
diff --git a/Documentation/hwmon/lm25066 b/Documentation/hwmon/lm25066
index b34c3de5c1bc..2cb20ebb234d 100644
--- a/Documentation/hwmon/lm25066
+++ b/Documentation/hwmon/lm25066
@@ -36,7 +36,7 @@ Author: Guenter Roeck <linux@roeck-us.net>
Description
-----------
-This driver supports hardware montoring for National Semiconductor / TI LM25056,
+This driver supports hardware monitoring for National Semiconductor / TI LM25056,
LM25063, LM25066, LM5064, and LM5066 Power Management, Monitoring, Control, and
Protection ICs.
diff --git a/Documentation/hwmon/ltc2990 b/Documentation/hwmon/ltc2990
new file mode 100644
index 000000000000..c25211e90bdc
--- /dev/null
+++ b/Documentation/hwmon/ltc2990
@@ -0,0 +1,43 @@
+Kernel driver ltc2990
+=====================
+
+Supported chips:
+ * Linear Technology LTC2990
+ Prefix: 'ltc2990'
+ Addresses scanned: -
+ Datasheet: http://www.linear.com/product/ltc2990
+
+Author: Mike Looijmans <mike.looijmans@topic.nl>
+
+
+Description
+-----------
+
+LTC2990 is a Quad I2C Voltage, Current and Temperature Monitor.
+The chip's inputs can measure 4 voltages, or two inputs together (1+2 and 3+4)
+can be combined to measure a differential voltage, which is typically used to
+measure current through a series resistor, or a temperature.
+
+This driver currently uses the 2x differential mode only. In order to support
+other modes, the driver will need to be expanded.
+
+
+Usage Notes
+-----------
+
+This driver does not probe for PMBus devices. You will have to instantiate
+devices explicitly.
+
+
+Sysfs attributes
+----------------
+
+The "curr*_input" measurements actually report the voltage drop across the
+input pins in microvolts. This is equivalent to the current through a 1mOhm
+sense resistor. Divide the reported value by the actual sense resistor value
+in mOhm to get the actual value.
+
+in0_input Voltage at Vcc pin in millivolt (range 2.5V to 5V)
+temp1_input Internal chip temperature in millidegrees Celcius
+curr1_input Current in mA across v1-v2 assuming a 1mOhm sense resistor.
+curr2_input Current in mA across v3-v4 assuming a 1mOhm sense resistor.
diff --git a/Documentation/hwmon/max16064 b/Documentation/hwmon/max16064
index d59cc7829bec..265370f5cb82 100644
--- a/Documentation/hwmon/max16064
+++ b/Documentation/hwmon/max16064
@@ -13,7 +13,7 @@ Author: Guenter Roeck <linux@roeck-us.net>
Description
-----------
-This driver supports hardware montoring for Maxim MAX16064 Quad Power-Supply
+This driver supports hardware monitoring for Maxim MAX16064 Quad Power-Supply
Controller with Active-Voltage Output Control and PMBus Interface.
The driver is a client driver to the core PMBus driver.
diff --git a/Documentation/hwmon/max34440 b/Documentation/hwmon/max34440
index 37cbf472a19d..f5b1fcaa9e4e 100644
--- a/Documentation/hwmon/max34440
+++ b/Documentation/hwmon/max34440
@@ -33,7 +33,7 @@ Author: Guenter Roeck <linux@roeck-us.net>
Description
-----------
-This driver supports hardware montoring for Maxim MAX34440 PMBus 6-Channel
+This driver supports hardware monitoring for Maxim MAX34440 PMBus 6-Channel
Power-Supply Manager, MAX34441 PMBus 5-Channel Power-Supply Manager
and Intelligent Fan Controller, and MAX34446 PMBus Power-Supply Data Logger.
It also supports the MAX34460 and MAX34461 PMBus Voltage Monitor & Sequencers.
diff --git a/Documentation/hwmon/max8688 b/Documentation/hwmon/max8688
index e78078638b91..ca233bec7a8a 100644
--- a/Documentation/hwmon/max8688
+++ b/Documentation/hwmon/max8688
@@ -13,7 +13,7 @@ Author: Guenter Roeck <linux@roeck-us.net>
Description
-----------
-This driver supports hardware montoring for Maxim MAX8688 Digital Power-Supply
+This driver supports hardware monitoring for Maxim MAX8688 Digital Power-Supply
Controller/Monitor with PMBus Interface.
The driver is a client driver to the core PMBus driver. Please see
diff --git a/Documentation/hwmon/nsa320 b/Documentation/hwmon/nsa320
new file mode 100644
index 000000000000..fdbd6947799b
--- /dev/null
+++ b/Documentation/hwmon/nsa320
@@ -0,0 +1,53 @@
+Kernel driver nsa320_hwmon
+==========================
+
+Supported chips:
+ * Holtek HT46R065 microcontroller with onboard firmware that configures
+ it to act as a hardware monitor.
+ Prefix: 'nsa320'
+ Addresses scanned: none
+ Datasheet: Not available, driver was reverse engineered based upon the
+ Zyxel kernel source
+
+Author:
+ Adam Baker <linux@baker-net.org.uk>
+
+Description
+-----------
+
+This chip is known to be used in the Zyxel NSA320 and NSA325 NAS Units and
+also in some variants of the NSA310 but the driver has only been tested
+on the NSA320. In all of these devices it is connected to the same 3 GPIO
+lines which are used to provide chip select, clock and data lines. The
+interface behaves similarly to SPI but at much lower speeds than are normally
+used for SPI.
+
+Following each chip select pulse the chip will generate a single 32 bit word
+that contains 0x55 as a marker to indicate that data is being read correctly,
+followed by an 8 bit fan speed in 100s of RPM and a 16 bit temperature in
+tenths of a degree.
+
+
+sysfs-Interface
+---------------
+
+temp1_input - temperature input
+fan1_input - fan speed
+
+Notes
+-----
+
+The access timings used in the driver are the same as used in the Zyxel
+provided kernel. Testing has shown that if the delay between chip select and
+the first clock pulse is reduced from 100 ms to just under 10ms then the chip
+will not produce any output. If the duration of either phase of the clock
+is reduced from 100 us to less than 15 us then data pulses are likely to be
+read twice corrupting the output. The above analysis is based upon a sample
+of one unit but suggests that the Zyxel provided delay values include a
+reasonable tolerance.
+
+The driver incorporates a limit that it will not check for updated values
+faster than once a second. This is because the hardware takes a relatively long
+time to read the data from the device and when it does it reads both temp and
+fan speed. As the most likely case for two accesses in quick succession is
+to read both of these values avoiding a second read delay is desirable.
diff --git a/Documentation/hwmon/ntc_thermistor b/Documentation/hwmon/ntc_thermistor
index 1d4cc847c6fe..8b9ff23edc32 100644
--- a/Documentation/hwmon/ntc_thermistor
+++ b/Documentation/hwmon/ntc_thermistor
@@ -3,9 +3,9 @@ Kernel driver ntc_thermistor
Supported thermistors from Murata:
* Murata NTC Thermistors NCP15WB473, NCP18WB473, NCP21WB473, NCP03WB473,
- NCP15WL333, NCP03WF104
+ NCP15WL333, NCP03WF104, NCP15XH103
Prefixes: 'ncp15wb473', 'ncp18wb473', 'ncp21wb473', 'ncp03wb473',
- 'ncp15wl333', 'ncp03wf104'
+ 'ncp15wl333', 'ncp03wf104', 'ncp15xh103'
Datasheet: Publicly available at Murata
Supported thermistors from EPCOS:
diff --git a/Documentation/hwmon/pmbus b/Documentation/hwmon/pmbus
index b397675e876d..dfd9c65996c0 100644
--- a/Documentation/hwmon/pmbus
+++ b/Documentation/hwmon/pmbus
@@ -43,7 +43,7 @@ Author: Guenter Roeck <linux@roeck-us.net>
Description
-----------
-This driver supports hardware montoring for various PMBus compliant devices.
+This driver supports hardware monitoring for various PMBus compliant devices.
It supports voltage, current, power, and temperature sensors as supported
by the device.
diff --git a/Documentation/hwmon/zl6100 b/Documentation/hwmon/zl6100
index 33908a4d68ff..477a94b131ae 100644
--- a/Documentation/hwmon/zl6100
+++ b/Documentation/hwmon/zl6100
@@ -60,7 +60,7 @@ Author: Guenter Roeck <linux@roeck-us.net>
Description
-----------
-This driver supports hardware montoring for Intersil / Zilker Labs ZL6100 and
+This driver supports hardware monitoring for Intersil / Zilker Labs ZL6100 and
compatible digital DC-DC controllers.
The driver is a client driver to the core PMBus driver. Please see
diff --git a/arch/arm/boot/dts/imx23.dtsi b/arch/arm/boot/dts/imx23.dtsi
index 1c6c07538a78..302d1168f424 100644
--- a/arch/arm/boot/dts/imx23.dtsi
+++ b/arch/arm/boot/dts/imx23.dtsi
@@ -569,7 +569,7 @@
};
};
- iio_hwmon {
+ iio-hwmon {
compatible = "iio-hwmon";
io-channels = <&lradc 8>;
};
diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi
index fae7b9069fc4..f637ec900cc8 100644
--- a/arch/arm/boot/dts/imx28.dtsi
+++ b/arch/arm/boot/dts/imx28.dtsi
@@ -1256,7 +1256,7 @@
};
};
- iio_hwmon {
+ iio-hwmon {
compatible = "iio-hwmon";
io-channels = <&lradc 8>;
};
diff --git a/arch/arm/boot/dts/vfxxx.dtsi b/arch/arm/boot/dts/vfxxx.dtsi
index a9ceb5bac40e..4539f8d909a5 100644
--- a/arch/arm/boot/dts/vfxxx.dtsi
+++ b/arch/arm/boot/dts/vfxxx.dtsi
@@ -629,5 +629,10 @@
status = "disabled";
};
};
+
+ iio-hwmon {
+ compatible = "iio-hwmon";
+ io-channels = <&adc0 16>, <&adc1 16>;
+ };
};
};
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index 60fb80bd353d..5c2d13a687aa 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -685,6 +685,20 @@ config SENSORS_LTC2945
This driver can also be built as a module. If so, the module will
be called ltc2945.
+config SENSORS_LTC2990
+ tristate "Linear Technology LTC2990 (current monitoring mode only)"
+ depends on I2C
+ help
+ If you say yes here you get support for Linear Technology LTC2990
+ I2C System Monitor. The LTC2990 supports a combination of voltage,
+ current and temperature monitoring, but in addition to the Vcc supply
+ voltage and chip temperature, this driver currently only supports
+ reading two currents by measuring two differential voltages across
+ series resistors.
+
+ This driver can also be built as a module. If so, the module will
+ be called ltc2990.
+
config SENSORS_LTC4151
tristate "Linear Technology LTC4151"
depends on I2C
@@ -1127,7 +1141,7 @@ config SENSORS_NTC_THERMISTOR
Currently, this driver supports
NCP15WB473, NCP18WB473, NCP21WB473, NCP03WB473, NCP15WL333,
- and NCP03WF104 from Murata and B57330V2103 from EPCOS.
+ NCP03WF104 and NCP15XH103 from Murata and B57330V2103 from EPCOS.
This driver can also be built as a module. If so, the module
will be called ntc-thermistor.
@@ -1176,6 +1190,21 @@ config SENSORS_NCT7904
This driver can also be built as a module. If so, the module
will be called nct7904.
+config SENSORS_NSA320
+ tristate "ZyXEL NSA320 and compatible fan speed and temperature sensors"
+ depends on GPIOLIB && OF
+ depends on MACH_KIRKWOOD || COMPILE_TEST
+ help
+ If you say yes here you get support for hardware monitoring
+ for the ZyXEL NSA320 Media Server and other compatible devices
+ (probably the NSA325 and some NSA310 variants).
+
+ The sensor data is taken from a Holtek HT46R065 microcontroller
+ connected to GPIO lines.
+
+ This driver can also be built as a module. If so, the module
+ will be called nsa320-hwmon.
+
config SENSORS_PCF8591
tristate "Philips PCF8591 ADC/DAC"
depends on I2C
diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
index 30c94df31465..58cc3acba7e7 100644
--- a/drivers/hwmon/Makefile
+++ b/drivers/hwmon/Makefile
@@ -100,6 +100,7 @@ obj-$(CONFIG_SENSORS_LM95234) += lm95234.o
obj-$(CONFIG_SENSORS_LM95241) += lm95241.o
obj-$(CONFIG_SENSORS_LM95245) += lm95245.o
obj-$(CONFIG_SENSORS_LTC2945) += ltc2945.o
+obj-$(CONFIG_SENSORS_LTC2990) += ltc2990.o
obj-$(CONFIG_SENSORS_LTC4151) += ltc4151.o
obj-$(CONFIG_SENSORS_LTC4215) += ltc4215.o
obj-$(CONFIG_SENSORS_LTC4222) += ltc4222.o
@@ -123,6 +124,7 @@ obj-$(CONFIG_SENSORS_NCT6683) += nct6683.o
obj-$(CONFIG_SENSORS_NCT6775) += nct6775.o
obj-$(CONFIG_SENSORS_NCT7802) += nct7802.o
obj-$(CONFIG_SENSORS_NCT7904) += nct7904.o
+obj-$(CONFIG_SENSORS_NSA320) += nsa320-hwmon.o
obj-$(CONFIG_SENSORS_NTC_THERMISTOR) += ntc_thermistor.o
obj-$(CONFIG_SENSORS_PC87360) += pc87360.o
obj-$(CONFIG_SENSORS_PC87427) += pc87427.o
@@ -149,7 +151,7 @@ obj-$(CONFIG_SENSORS_TMP103) += tmp103.o
obj-$(CONFIG_SENSORS_TMP401) += tmp401.o
obj-$(CONFIG_SENSORS_TMP421) += tmp421.o
obj-$(CONFIG_SENSORS_TWL4030_MADC)+= twl4030-madc-hwmon.o
-obj-$(CONFIG_SENSORS_VEXPRESS) += vexpress.o
+obj-$(CONFIG_SENSORS_VEXPRESS) += vexpress-hwmon.o
obj-$(CONFIG_SENSORS_VIA_CPUTEMP)+= via-cputemp.o
obj-$(CONFIG_SENSORS_VIA686A) += via686a.o
obj-$(CONFIG_SENSORS_VT1211) += vt1211.o
diff --git a/drivers/hwmon/iio_hwmon.c b/drivers/hwmon/iio_hwmon.c
index 17ae2eb26ce2..b550ba5fa58a 100644
--- a/drivers/hwmon/iio_hwmon.c
+++ b/drivers/hwmon/iio_hwmon.c
@@ -67,6 +67,7 @@ static int iio_hwmon_probe(struct platform_device *pdev)
enum iio_chan_type type;
struct iio_channel *channels;
const char *name = "iio_hwmon";
+ char *sname;
if (dev->of_node && dev->of_node->name)
name = dev->of_node->name;
@@ -144,7 +145,15 @@ static int iio_hwmon_probe(struct platform_device *pdev)
st->attr_group.attrs = st->attrs;
st->groups[0] = &st->attr_group;
- st->hwmon_dev = hwmon_device_register_with_groups(dev, name, st,
+
+ sname = devm_kstrdup(dev, name, GFP_KERNEL);
+ if (!sname) {
+ ret = -ENOMEM;
+ goto error_release_channels;
+ }
+
+ strreplace(sname, '-', '_');
+ st->hwmon_dev = hwmon_device_register_with_groups(dev, sname, st,
st->groups);
if (IS_ERR(st->hwmon_dev)) {
ret = PTR_ERR(st->hwmon_dev);
diff --git a/drivers/hwmon/ltc2990.c b/drivers/hwmon/ltc2990.c
new file mode 100644
index 000000000000..8f8fe059ab48
--- /dev/null
+++ b/drivers/hwmon/ltc2990.c
@@ -0,0 +1,161 @@
+/*
+ * Driver for Linear Technology LTC2990 power monitor
+ *
+ * Copyright (C) 2014 Topic Embedded Products
+ * Author: Mike Looijmans <mike.looijmans@topic.nl>
+ *
+ * License: GPLv2
+ *
+ * This driver assumes the chip is wired as a dual current monitor, and
+ * reports the voltage drop across two series resistors. It also reports
+ * the chip's internal temperature and Vcc power supply voltage.
+ */
+
+#include <linux/err.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/i2c.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+
+#define LTC2990_STATUS 0x00
+#define LTC2990_CONTROL 0x01
+#define LTC2990_TRIGGER 0x02
+#define LTC2990_TINT_MSB 0x04
+#define LTC2990_V1_MSB 0x06
+#define LTC2990_V2_MSB 0x08
+#define LTC2990_V3_MSB 0x0A
+#define LTC2990_V4_MSB 0x0C
+#define LTC2990_VCC_MSB 0x0E
+
+#define LTC2990_CONTROL_KELVIN BIT(7)
+#define LTC2990_CONTROL_SINGLE BIT(6)
+#define LTC2990_CONTROL_MEASURE_ALL (0x3 << 3)
+#define LTC2990_CONTROL_MODE_CURRENT 0x06
+#define LTC2990_CONTROL_MODE_VOLTAGE 0x07
+
+/* convert raw register value to sign-extended integer in 16-bit range */
+static int ltc2990_voltage_to_int(int raw)
+{
+ if (raw & BIT(14))
+ return -(0x4000 - (raw & 0x3FFF)) << 2;
+ else
+ return (raw & 0x3FFF) << 2;
+}
+
+/* Return the converted value from the given register in uV or mC */
+static int ltc2990_get_value(struct i2c_client *i2c, u8 reg, int *result)
+{
+ int val;
+
+ val = i2c_smbus_read_word_swapped(i2c, reg);
+ if (unlikely(val < 0))
+ return val;
+
+ switch (reg) {
+ case LTC2990_TINT_MSB:
+ /* internal temp, 0.0625 degrees/LSB, 13-bit */
+ val = (val & 0x1FFF) << 3;
+ *result = (val * 1000) >> 7;
+ break;
+ case LTC2990_V1_MSB:
+ case LTC2990_V3_MSB:
+ /* Vx-Vy, 19.42uV/LSB. Depends on mode. */
+ *result = ltc2990_voltage_to_int(val) * 1942 / (4 * 100);
+ break;
+ case LTC2990_VCC_MSB:
+ /* Vcc, 305.18μV/LSB, 2.5V offset */
+ *result = (ltc2990_voltage_to_int(val) * 30518 /
+ (4 * 100 * 1000)) + 2500;
+ break;
+ default:
+ return -EINVAL; /* won't happen, keep compiler happy */
+ }
+
+ return 0;
+}
+
+static ssize_t ltc2990_show_value(struct device *dev,
+ struct device_attribute *da, char *buf)
+{
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
+ int value;
+ int ret;
+
+ ret = ltc2990_get_value(dev_get_drvdata(dev), attr->index, &value);
+ if (unlikely(ret < 0))
+ return ret;
+
+ return snprintf(buf, PAGE_SIZE, "%d\n", value);
+}
+
+static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, ltc2990_show_value, NULL,
+ LTC2990_TINT_MSB);
+static SENSOR_DEVICE_ATTR(curr1_input, S_IRUGO, ltc2990_show_value, NULL,
+ LTC2990_V1_MSB);
+static SENSOR_DEVICE_ATTR(curr2_input, S_IRUGO, ltc2990_show_value, NULL,
+ LTC2990_V3_MSB);
+static SENSOR_DEVICE_ATTR(in0_input, S_IRUGO, ltc2990_show_value, NULL,
+ LTC2990_VCC_MSB);
+
+static struct attribute *ltc2990_attrs[] = {
+ &sensor_dev_attr_temp1_input.dev_attr.attr,
+ &sensor_dev_attr_curr1_input.dev_attr.attr,
+ &sensor_dev_attr_curr2_input.dev_attr.attr,
+ &sensor_dev_attr_in0_input.dev_attr.attr,
+ NULL,
+};
+ATTRIBUTE_GROUPS(ltc2990);
+
+static int ltc2990_i2c_probe(struct i2c_client *i2c,
+ const struct i2c_device_id *id)
+{
+ int ret;
+ struct device *hwmon_dev;
+
+ if (!i2c_check_functionality(i2c->adapter, I2C_FUNC_SMBUS_BYTE_DATA |
+ I2C_FUNC_SMBUS_WORD_DATA))
+ return -ENODEV;
+
+ /* Setup continuous mode, current monitor */
+ ret = i2c_smbus_write_byte_data(i2c, LTC2990_CONTROL,
+ LTC2990_CONTROL_MEASURE_ALL |
+ LTC2990_CONTROL_MODE_CURRENT);
+ if (ret < 0) {
+ dev_err(&i2c->dev, "Error: Failed to set control mode.\n");
+ return ret;
+ }
+ /* Trigger once to start continuous conversion */
+ ret = i2c_smbus_write_byte_data(i2c, LTC2990_TRIGGER, 1);
+ if (ret < 0) {
+ dev_err(&i2c->dev, "Error: Failed to start acquisition.\n");
+ return ret;
+ }
+
+ hwmon_dev = devm_hwmon_device_register_with_groups(&i2c->dev,
+ i2c->name,
+ i2c,
+ ltc2990_groups);
+
+ return PTR_ERR_OR_ZERO(hwmon_dev);
+}
+
+static const struct i2c_device_id ltc2990_i2c_id[] = {
+ { "ltc2990", 0 },
+ {}
+};
+MODULE_DEVICE_TABLE(i2c, ltc2990_i2c_id);
+
+static struct i2c_driver ltc2990_i2c_driver = {
+ .driver = {
+ .name = "ltc2990",
+ },
+ .probe = ltc2990_i2c_probe,
+ .id_table = ltc2990_i2c_id,
+};
+
+module_i2c_driver(ltc2990_i2c_driver);
+
+MODULE_DESCRIPTION("LTC2990 Sensor Driver");
+MODULE_AUTHOR("Topic Embedded Products");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/hwmon/nsa320-hwmon.c b/drivers/hwmon/nsa320-hwmon.c
new file mode 100644
index 000000000000..0517a265741f
--- /dev/null
+++ b/drivers/hwmon/nsa320-hwmon.c
@@ -0,0 +1,215 @@
+/*
+ * drivers/hwmon/nsa320-hwmon.c
+ *
+ * ZyXEL NSA320 Media Servers
+ * hardware monitoring
+ *
+ * Copyright (C) 2016 Adam Baker <linux@baker-net.org.uk>
+ * based on a board file driver
+ * Copyright (C) 2012 Peter Schildmann <linux@schildmann.info>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License v2 as published by the
+ * Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ */
+
+#include <linux/bitops.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/gpio/consumer.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/jiffies.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+
+/* Tests for error return values rely upon this value being < 0x80 */
+#define MAGIC_NUMBER 0x55
+
+/*
+ * The Zyxel hwmon MCU is a Holtek HT46R065 that is factory programmed
+ * to perform temperature and fan speed monitoring. It is read by taking
+ * the active pin low. The 32 bit output word is then clocked onto the
+ * data line. The MSB of the data word is a magic nuber to indicate it
+ * has been read correctly, the next byte is the fan speed (in hundreds
+ * of RPM) and the last two bytes are the temperature (in tenths of a
+ * degree)
+ */
+
+struct nsa320_hwmon {
+ struct mutex update_lock; /* lock GPIO operations */
+ unsigned long last_updated; /* jiffies */
+ unsigned long mcu_data;
+ struct gpio_desc *act;
+ struct gpio_desc *clk;
+ struct gpio_desc *data;
+};
+
+enum nsa320_inputs {
+ NSA320_TEMP = 0,
+ NSA320_FAN = 1,
+};
+
+static const char * const nsa320_input_names[] = {
+ [NSA320_TEMP] = "System Temperature",
+ [NSA320_FAN] = "Chassis Fan",
+};
+
+/*
+ * Although this protocol looks similar to SPI the long delay
+ * between the active (aka chip select) signal and the shorter
+ * delay between clock pulses are needed for reliable operation.
+ * The delays provided are taken from the manufacturer kernel,
+ * testing suggest they probably incorporate a reasonable safety
+ * margin. (The single device tested became unreliable if the
+ * delay was reduced to 1/10th of this value.)
+ */
+static s32 nsa320_hwmon_update(struct device *dev)
+{
+ u32 mcu_data;
+ u32 mask;
+ struct nsa320_hwmon *hwmon = dev_get_drvdata(dev);
+
+ mutex_lock(&hwmon->update_lock);
+
+ mcu_data = hwmon->mcu_data;
+
+ if (time_after(jiffies, hwmon->last_updated + HZ) || mcu_data == 0) {
+ gpiod_set_value(hwmon->act, 1);
+ msleep(100);
+
+ mcu_data = 0;
+ for (mask = BIT(31); mask; mask >>= 1) {
+ gpiod_set_value(hwmon->clk, 0);
+ usleep_range(100, 200);
+ gpiod_set_value(hwmon->clk, 1);
+ usleep_range(100, 200);
+ if (gpiod_get_value(hwmon->data))
+ mcu_data |= mask;
+ }
+
+ gpiod_set_value(hwmon->act, 0);
+ dev_dbg(dev, "Read raw MCU data %08x\n", mcu_data);
+
+ if ((mcu_data >> 24) != MAGIC_NUMBER) {
+ dev_dbg(dev, "Read invalid MCU data %08x\n", mcu_data);
+ mcu_data = -EIO;
+ } else {
+ hwmon->mcu_data = mcu_data;
+ hwmon->last_updated = jiffies;
+ }
+ }
+
+ mutex_unlock(&hwmon->update_lock);
+
+ return mcu_data;
+}
+
+static ssize_t show_label(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ int channel = to_sensor_dev_attr(attr)->index;
+
+ return sprintf(buf, "%s\n", nsa320_input_names[channel]);
+}
+
+static ssize_t show_temp(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ s32 mcu_data = nsa320_hwmon_update(dev);
+
+ if (mcu_data < 0)
+ return mcu_data;
+
+ return sprintf(buf, "%d\n", (mcu_data & 0xffff) * 100);
+}
+
+static ssize_t show_fan(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ s32 mcu_data = nsa320_hwmon_update(dev);
+
+ if (mcu_data < 0)
+ return mcu_data;
+
+ return sprintf(buf, "%d\n", ((mcu_data & 0xff0000) >> 16) * 100);
+}
+
+static SENSOR_DEVICE_ATTR(temp1_label, S_IRUGO, show_label, NULL, NSA320_TEMP);
+static DEVICE_ATTR(temp1_input, S_IRUGO, show_temp, NULL);
+static SENSOR_DEVICE_ATTR(fan1_label, S_IRUGO, show_label, NULL, NSA320_FAN);
+static DEVICE_ATTR(fan1_input, S_IRUGO, show_fan, NULL);
+
+static struct attribute *nsa320_attrs[] = {
+ &sensor_dev_attr_temp1_label.dev_attr.attr,
+ &dev_attr_temp1_input.attr,
+ &sensor_dev_attr_fan1_label.dev_attr.attr,
+ &dev_attr_fan1_input.attr,
+ NULL
+};
+
+ATTRIBUTE_GROUPS(nsa320);
+
+static const struct of_device_id of_nsa320_hwmon_match[] = {
+ { .compatible = "zyxel,nsa320-mcu", },
+ { },
+};
+
+static int nsa320_hwmon_probe(struct platform_device *pdev)
+{
+ struct nsa320_hwmon *hwmon;
+ struct device *classdev;
+
+ hwmon = devm_kzalloc(&pdev->dev, sizeof(*hwmon), GFP_KERNEL);
+ if (!hwmon)
+ return -ENOMEM;
+
+ /* Look up the GPIO pins to use */
+ hwmon->act = devm_gpiod_get(&pdev->dev, "act", GPIOD_OUT_LOW);
+ if (IS_ERR(hwmon->act))
+ return PTR_ERR(hwmon->act);
+
+ hwmon->clk = devm_gpiod_get(&pdev->dev, "clk", GPIOD_OUT_HIGH);
+ if (IS_ERR(hwmon->clk))
+ return PTR_ERR(hwmon->clk);
+
+ hwmon->data = devm_gpiod_get(&pdev->dev, "data", GPIOD_IN);
+ if (IS_ERR(hwmon->data))
+ return PTR_ERR(hwmon->data);
+
+ mutex_init(&hwmon->update_lock);
+
+ classdev = devm_hwmon_device_register_with_groups(&pdev->dev,
+ "nsa320", hwmon, nsa320_groups);
+
+ return PTR_ERR_OR_ZERO(classdev);
+
+}
+
+/* All allocations use devres so remove() is not needed. */
+
+static struct platform_driver nsa320_hwmon_driver = {
+ .probe = nsa320_hwmon_probe,
+ .driver = {
+ .name = "nsa320-hwmon",
+ .of_match_table = of_match_ptr(of_nsa320_hwmon_match),
+ },
+};
+
+module_platform_driver(nsa320_hwmon_driver);
+
+MODULE_DEVICE_TABLE(of, of_nsa320_hwmon_match);
+MODULE_AUTHOR("Peter Schildmann <linux@schildmann.info>");
+MODULE_AUTHOR("Adam Baker <linux@baker-net.org.uk>");
+MODULE_DESCRIPTION("NSA320 Hardware Monitoring");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:nsa320-hwmon");
diff --git a/drivers/hwmon/ntc_thermistor.c b/drivers/hwmon/ntc_thermistor.c
index feed30646d91..faa6e8dfbaaf 100644
--- a/drivers/hwmon/ntc_thermistor.c
+++ b/drivers/hwmon/ntc_thermistor.c
@@ -54,6 +54,7 @@ static const struct platform_device_id ntc_thermistor_id[] = {
{ "ncp15wl333", TYPE_NCPXXWL333 },
{ "b57330v2103", TYPE_B57330V2103},
{ "ncp03wf104", TYPE_NCPXXWF104 },
+ { "ncp15xh103", TYPE_NCPXXXH103 },
{ },
};
@@ -173,6 +174,43 @@ static const struct ntc_compensation ncpXXwf104[] = {
{ .temp_c = 125, .ohm = 2522 },
};
+static const struct ntc_compensation ncpXXxh103[] = {
+ { .temp_c = -40, .ohm = 247565 },
+ { .temp_c = -35, .ohm = 181742 },
+ { .temp_c = -30, .ohm = 135128 },
+ { .temp_c = -25, .ohm = 101678 },
+ { .temp_c = -20, .ohm = 77373 },
+ { .temp_c = -15, .ohm = 59504 },
+ { .temp_c = -10, .ohm = 46222 },
+ { .temp_c = -5, .ohm = 36244 },
+ { .temp_c = 0, .ohm = 28674 },
+ { .temp_c = 5, .ohm = 22878 },
+ { .temp_c = 10, .ohm = 18399 },
+ { .temp_c = 15, .ohm = 14910 },
+ { .temp_c = 20, .ohm = 12169 },
+ { .temp_c = 25, .ohm = 10000 },
+ { .temp_c = 30, .ohm = 8271 },
+ { .temp_c = 35, .ohm = 6883 },
+ { .temp_c = 40, .ohm = 5762 },
+ { .temp_c = 45, .ohm = 4851 },
+ { .temp_c = 50, .ohm = 4105 },
+ { .temp_c = 55, .ohm = 3492 },
+ { .temp_c = 60, .ohm = 2985 },
+ { .temp_c = 65, .ohm = 2563 },
+ { .temp_c = 70, .ohm = 2211 },
+ { .temp_c = 75, .ohm = 1915 },
+ { .temp_c = 80, .ohm = 1666 },
+ { .temp_c = 85, .ohm = 1454 },
+ { .temp_c = 90, .ohm = 1275 },
+ { .temp_c = 95, .ohm = 1121 },
+ { .temp_c = 100, .ohm = 990 },
+ { .temp_c = 105, .ohm = 876 },
+ { .temp_c = 110, .ohm = 779 },
+ { .temp_c = 115, .ohm = 694 },
+ { .temp_c = 120, .ohm = 620 },
+ { .temp_c = 125, .ohm = 556 },
+};
+
/*
* The following compensation table is from the specification of EPCOS NTC
* Thermistors Datasheet
@@ -260,6 +298,8 @@ static const struct of_device_id ntc_match[] = {
.data = &ntc_thermistor_id[5]},
{ .compatible = "murata,ncp03wf104",
.data = &ntc_thermistor_id[6] },
+ { .compatible = "murata,ncp15xh103",
+ .data = &ntc_thermistor_id[7] },
/* Usage of vendor name "ntc" is deprecated */
{ .compatible = "ntc,ncp15wb473",
@@ -609,6 +649,10 @@ static int ntc_thermistor_probe(struct platform_device *pdev)
data->comp = ncpXXwf104;
data->n_comp = ARRAY_SIZE(ncpXXwf104);
break;
+ case TYPE_NCPXXXH103:
+ data->comp = ncpXXxh103;
+ data->n_comp = ARRAY_SIZE(ncpXXxh103);
+ break;
default:
dev_err(&pdev->dev, "Unknown device type: %lu(%s)\n",
pdev_id->driver_data, pdev_id->name);
diff --git a/drivers/hwmon/pmbus/Kconfig b/drivers/hwmon/pmbus/Kconfig
index 7e5cc3d025ef..054d3d863802 100644
--- a/drivers/hwmon/pmbus/Kconfig
+++ b/drivers/hwmon/pmbus/Kconfig
@@ -31,8 +31,8 @@ config SENSORS_ADM1275
default n
help
If you say yes here you get hardware monitoring support for Analog
- Devices ADM1075, ADM1275, ADM1276, ADM1293, and ADM1294 Hot-Swap
- Controller and Digital Power Monitors.
+ Devices ADM1075, ADM1275, ADM1276, ADM1278, ADM1293, and ADM1294
+ Hot-Swap Controller and Digital Power Monitors.
This driver can also be built as a module. If so, the module will
be called adm1275.
diff --git a/drivers/hwmon/pmbus/adm1275.c b/drivers/hwmon/pmbus/adm1275.c
index 188af4c89f40..3baa4f4a8c5e 100644
--- a/drivers/hwmon/pmbus/adm1275.c
+++ b/drivers/hwmon/pmbus/adm1275.c
@@ -24,7 +24,7 @@
#include <linux/bitops.h>
#include "pmbus.h"
-enum chips { adm1075, adm1275, adm1276, adm1293, adm1294 };
+enum chips { adm1075, adm1275, adm1276, adm1278, adm1293, adm1294 };
#define ADM1275_MFR_STATUS_IOUT_WARN2 BIT(0)
#define ADM1293_MFR_STATUS_VAUX_UV_WARN BIT(5)
@@ -41,6 +41,10 @@ enum chips { adm1075, adm1275, adm1276, adm1293, adm1294 };
#define ADM1075_IRANGE_25 BIT(3)
#define ADM1075_IRANGE_MASK (BIT(3) | BIT(4))
+#define ADM1278_TEMP1_EN BIT(3)
+#define ADM1278_VIN_EN BIT(2)
+#define ADM1278_VOUT_EN BIT(1)
+
#define ADM1293_IRANGE_25 0
#define ADM1293_IRANGE_50 BIT(6)
#define ADM1293_IRANGE_100 BIT(7)
@@ -54,6 +58,7 @@ enum chips { adm1075, adm1275, adm1276, adm1293, adm1294 };
#define ADM1293_VAUX_EN BIT(1)
+#define ADM1278_PEAK_TEMP 0xd7
#define ADM1275_IOUT_WARN2_LIMIT 0xd7
#define ADM1275_DEVICE_CONFIG 0xd8
@@ -80,6 +85,7 @@ struct adm1275_data {
bool have_iout_min;
bool have_pin_min;
bool have_pin_max;
+ bool have_temp_max;
struct pmbus_driver_info info;
};
@@ -113,6 +119,13 @@ static const struct coefficients adm1276_coefficients[] = {
[4] = { 2115, 0, -1 }, /* power, vrange not set */
};
+static const struct coefficients adm1278_coefficients[] = {
+ [0] = { 19599, 0, -2 }, /* voltage */
+ [1] = { 800, 20475, -1 }, /* current */
+ [2] = { 6123, 0, -2 }, /* power */
+ [3] = { 42, 31880, -1 }, /* temperature */
+};
+
static const struct coefficients adm1293_coefficients[] = {
[0] = { 3333, -1, 0 }, /* voltage, vrange 1.2V */
[1] = { 5552, -5, -1 }, /* voltage, vrange 7.4V */
@@ -196,6 +209,11 @@ static int adm1275_read_word_data(struct i2c_client *client, int page, int reg)
return -ENXIO;
ret = pmbus_read_word_data(client, 0, ADM1276_PEAK_PIN);
break;
+ case PMBUS_VIRT_READ_TEMP_MAX:
+ if (!data->have_temp_max)
+ return -ENXIO;
+ ret = pmbus_read_word_data(client, 0, ADM1278_PEAK_TEMP);
+ break;
case PMBUS_VIRT_RESET_IOUT_HISTORY:
case PMBUS_VIRT_RESET_VOUT_HISTORY:
case PMBUS_VIRT_RESET_VIN_HISTORY:
@@ -204,6 +222,10 @@ static int adm1275_read_word_data(struct i2c_client *client, int page, int reg)
if (!data->have_pin_max)
return -ENXIO;
break;
+ case PMBUS_VIRT_RESET_TEMP_HISTORY:
+ if (!data->have_temp_max)
+ return -ENXIO;
+ break;
default:
ret = -ENODATA;
break;
@@ -245,6 +267,9 @@ static int adm1275_write_word_data(struct i2c_client *client, int page, int reg,
ret = pmbus_write_word_data(client, 0,
ADM1293_PIN_MIN, 0);
break;
+ case PMBUS_VIRT_RESET_TEMP_HISTORY:
+ ret = pmbus_write_word_data(client, 0, ADM1278_PEAK_TEMP, 0);
+ break;
default:
ret = -ENODATA;
break;
@@ -312,6 +337,7 @@ static const struct i2c_device_id adm1275_id[] = {
{ "adm1075", adm1075 },
{ "adm1275", adm1275 },
{ "adm1276", adm1276 },
+ { "adm1278", adm1278 },
{ "adm1293", adm1293 },
{ "adm1294", adm1294 },
{ }
@@ -329,6 +355,7 @@ static int adm1275_probe(struct i2c_client *client,
const struct i2c_device_id *mid;
const struct coefficients *coefficients;
int vindex = -1, voindex = -1, cindex = -1, pindex = -1;
+ int tindex = -1;
if (!i2c_check_functionality(client->adapter,
I2C_FUNC_SMBUS_READ_BYTE_DATA
@@ -386,6 +413,7 @@ static int adm1275_probe(struct i2c_client *client,
info->format[PSC_VOLTAGE_OUT] = direct;
info->format[PSC_CURRENT_OUT] = direct;
info->format[PSC_POWER] = direct;
+ info->format[PSC_TEMPERATURE] = direct;
info->func[0] = PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT;
info->read_word_data = adm1275_read_word_data;
@@ -460,6 +488,27 @@ static int adm1275_probe(struct i2c_client *client,
info->func[0] |=
PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT;
break;
+ case adm1278:
+ data->have_vout = true;
+ data->have_pin_max = true;
+ data->have_temp_max = true;
+
+ coefficients = adm1278_coefficients;
+ vindex = 0;
+ cindex = 1;
+ pindex = 2;
+ tindex = 3;
+
+ info->func[0] |= PMBUS_HAVE_PIN | PMBUS_HAVE_STATUS_INPUT;
+ if (config & ADM1278_TEMP1_EN)
+ info->func[0] |=
+ PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP;
+ if (config & ADM1278_VIN_EN)
+ info->func[0] |= PMBUS_HAVE_VIN;
+ if (config & ADM1278_VOUT_EN)
+ info->func[0] |=
+ PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT;
+ break;
case adm1293:
case adm1294:
data->have_iout_min = true;
@@ -537,6 +586,11 @@ static int adm1275_probe(struct i2c_client *client,
info->b[PSC_POWER] = coefficients[pindex].b;
info->R[PSC_POWER] = coefficients[pindex].R;
}
+ if (tindex >= 0) {
+ info->m[PSC_TEMPERATURE] = coefficients[tindex].m;
+ info->b[PSC_TEMPERATURE] = coefficients[tindex].b;
+ info->R[PSC_TEMPERATURE] = coefficients[tindex].R;
+ }
return pmbus_do_probe(client, id, info);
}
diff --git a/drivers/hwmon/vexpress.c b/drivers/hwmon/vexpress-hwmon.c
index 8ba419d343f8..8ba419d343f8 100644
--- a/drivers/hwmon/vexpress.c
+++ b/drivers/hwmon/vexpress-hwmon.c
diff --git a/include/linux/platform_data/ntc_thermistor.h b/include/linux/platform_data/ntc_thermistor.h
index aed170588b74..698d0d59db76 100644
--- a/include/linux/platform_data/ntc_thermistor.h
+++ b/include/linux/platform_data/ntc_thermistor.h
@@ -28,6 +28,7 @@ enum ntc_thermistor_type {
TYPE_NCPXXWL333,
TYPE_B57330V2103,
TYPE_NCPXXWF104,
+ TYPE_NCPXXXH103,
};
struct ntc_thermistor_platform_data {