summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorJoseph Myers <joseph@codesourcery.com>2013-12-10 23:07:45 +0000
committerScott Wood <scottwood@freescale.com>2014-01-07 18:32:21 -0600
commit640e922501103aaf2e0abb4cf4de5d49fa8342f7 (patch)
tree4aeb43629f6537c620ac72f39a202d6b334ec8a1
parent228b1a473037c89d524e03a569c688a22241b4ea (diff)
downloadlinux-640e922501103aaf2e0abb4cf4de5d49fa8342f7.tar.bz2
powerpc: fix exception clearing in e500 SPE float emulation
The e500 SPE floating-point emulation code clears existing exceptions (__FPU_FPSCR &= ~FP_EX_MASK;) before ORing in the exceptions from the emulated operation. However, these exception bits are the "sticky", cumulative exception bits, and should only be cleared by the user program setting SPEFSCR, not implicitly by any floating-point instruction (whether executed purely by the hardware or emulated). The spurious clearing of these bits shows up as missing exceptions in glibc testing. Fixing this, however, is not as simple as just not clearing the bits, because while the bits may be from previous floating-point operations (in which case they should not be cleared), the processor can also set the sticky bits itself before the interrupt for an exception occurs, and this can happen in cases when IEEE 754 semantics are that the sticky bit should not be set. Specifically, the "invalid" sticky bit is set in various cases with non-finite operands, where IEEE 754 semantics do not involve raising such an exception, and the "underflow" sticky bit is set in cases of exact underflow, whereas IEEE 754 semantics are that this flag is set only for inexact underflow. Thus, for correct emulation the kernel needs to know the setting of these two sticky bits before the instruction being emulated. When a floating-point operation raises an exception, the kernel can note the state of the sticky bits immediately afterwards. Some <fenv.h> functions that affect the state of these bits, such as fesetenv and feholdexcept, need to use prctl with PR_GET_FPEXC and PR_SET_FPEXC anyway, and so it is natural to record the state of those bits during that call into the kernel and so avoid any need for a separate call into the kernel to inform it of a change to those bits. Thus, the interface I chose to use (in this patch and the glibc port) is that one of those prctl calls must be made after any userspace change to those sticky bits, other than through a floating-point operation that traps into the kernel anyway. feclearexcept and fesetexceptflag duly make those calls, which would not be required were it not for this issue. The previous EGLIBC port, and the uClibc code copied from it, is fundamentally broken as regards any use of prctl for floating-point exceptions because it didn't use the PR_FP_EXC_SW_ENABLE bit in its prctl calls (and did various worse things, such as passing a pointer when prctl expected an integer). If you avoid anything where prctl is used, the clearing of sticky bits still means it will never give anything approximating correct exception semantics with existing kernels. I don't believe the patch makes things any worse for existing code that doesn't try to inform the kernel of changes to sticky bits - such code may get incorrect exceptions in some cases, but it would have done so anyway in other cases. Signed-off-by: Joseph Myers <joseph@codesourcery.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
-rw-r--r--arch/powerpc/include/asm/processor.h6
-rw-r--r--arch/powerpc/kernel/process.c30
-rw-r--r--arch/powerpc/math-emu/math_efp.c20
3 files changed, 52 insertions, 4 deletions
diff --git a/arch/powerpc/include/asm/processor.h b/arch/powerpc/include/asm/processor.h
index fc14a38c7ccf..91441d9cbaae 100644
--- a/arch/powerpc/include/asm/processor.h
+++ b/arch/powerpc/include/asm/processor.h
@@ -256,6 +256,8 @@ struct thread_struct {
unsigned long evr[32]; /* upper 32-bits of SPE regs */
u64 acc; /* Accumulator */
unsigned long spefscr; /* SPE & eFP status */
+ unsigned long spefscr_last; /* SPEFSCR value on last prctl
+ call or trap return */
int used_spe; /* set if process has used spe */
#endif /* CONFIG_SPE */
#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
@@ -317,7 +319,9 @@ struct thread_struct {
(_ALIGN_UP(sizeof(init_thread_info), 16) + (unsigned long) &init_stack)
#ifdef CONFIG_SPE
-#define SPEFSCR_INIT .spefscr = SPEFSCR_FINVE | SPEFSCR_FDBZE | SPEFSCR_FUNFE | SPEFSCR_FOVFE,
+#define SPEFSCR_INIT \
+ .spefscr = SPEFSCR_FINVE | SPEFSCR_FDBZE | SPEFSCR_FUNFE | SPEFSCR_FOVFE, \
+ .spefscr_last = SPEFSCR_FINVE | SPEFSCR_FDBZE | SPEFSCR_FUNFE | SPEFSCR_FOVFE,
#else
#define SPEFSCR_INIT
#endif
diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c
index 3386d8ab7eb0..b08c0d03530f 100644
--- a/arch/powerpc/kernel/process.c
+++ b/arch/powerpc/kernel/process.c
@@ -1175,6 +1175,19 @@ int set_fpexc_mode(struct task_struct *tsk, unsigned int val)
if (val & PR_FP_EXC_SW_ENABLE) {
#ifdef CONFIG_SPE
if (cpu_has_feature(CPU_FTR_SPE)) {
+ /*
+ * When the sticky exception bits are set
+ * directly by userspace, it must call prctl
+ * with PR_GET_FPEXC (with PR_FP_EXC_SW_ENABLE
+ * in the existing prctl settings) or
+ * PR_SET_FPEXC (with PR_FP_EXC_SW_ENABLE in
+ * the bits being set). <fenv.h> functions
+ * saving and restoring the whole
+ * floating-point environment need to do so
+ * anyway to restore the prctl settings from
+ * the saved environment.
+ */
+ tsk->thread.spefscr_last = mfspr(SPRN_SPEFSCR);
tsk->thread.fpexc_mode = val &
(PR_FP_EXC_SW_ENABLE | PR_FP_ALL_EXCEPT);
return 0;
@@ -1206,9 +1219,22 @@ int get_fpexc_mode(struct task_struct *tsk, unsigned long adr)
if (tsk->thread.fpexc_mode & PR_FP_EXC_SW_ENABLE)
#ifdef CONFIG_SPE
- if (cpu_has_feature(CPU_FTR_SPE))
+ if (cpu_has_feature(CPU_FTR_SPE)) {
+ /*
+ * When the sticky exception bits are set
+ * directly by userspace, it must call prctl
+ * with PR_GET_FPEXC (with PR_FP_EXC_SW_ENABLE
+ * in the existing prctl settings) or
+ * PR_SET_FPEXC (with PR_FP_EXC_SW_ENABLE in
+ * the bits being set). <fenv.h> functions
+ * saving and restoring the whole
+ * floating-point environment need to do so
+ * anyway to restore the prctl settings from
+ * the saved environment.
+ */
+ tsk->thread.spefscr_last = mfspr(SPRN_SPEFSCR);
val = tsk->thread.fpexc_mode;
- else
+ } else
return -EINVAL;
#else
return -EINVAL;
diff --git a/arch/powerpc/math-emu/math_efp.c b/arch/powerpc/math-emu/math_efp.c
index a73f0884d358..59835c625dc6 100644
--- a/arch/powerpc/math-emu/math_efp.c
+++ b/arch/powerpc/math-emu/math_efp.c
@@ -630,9 +630,27 @@ update_ccr:
regs->ccr |= (IR << ((7 - ((speinsn >> 23) & 0x7)) << 2));
update_regs:
- __FPU_FPSCR &= ~FP_EX_MASK;
+ /*
+ * If the "invalid" exception sticky bit was set by the
+ * processor for non-finite input, but was not set before the
+ * instruction being emulated, clear it. Likewise for the
+ * "underflow" bit, which may have been set by the processor
+ * for exact underflow, not just inexact underflow when the
+ * flag should be set for IEEE 754 semantics. Other sticky
+ * exceptions will only be set by the processor when they are
+ * correct according to IEEE 754 semantics, and we must not
+ * clear sticky bits that were already set before the emulated
+ * instruction as they represent the user-visible sticky
+ * exception status. "inexact" traps to kernel are not
+ * required for IEEE semantics and are not enabled by default,
+ * so the "inexact" sticky bit may have been set by a previous
+ * instruction without the kernel being aware of it.
+ */
+ __FPU_FPSCR
+ &= ~(FP_EX_INVALID | FP_EX_UNDERFLOW) | current->thread.spefscr_last;
__FPU_FPSCR |= (FP_CUR_EXCEPTIONS & FP_EX_MASK);
mtspr(SPRN_SPEFSCR, __FPU_FPSCR);
+ current->thread.spefscr_last = __FPU_FPSCR;
current->thread.evr[fc] = vc.wp[0];
regs->gpr[fc] = vc.wp[1];