Merge master.kernel.org:/home/rmk/linux-2.6-arm

* master.kernel.org:/home/rmk/linux-2.6-arm:
  Allow architectures to override copy_user_highpage()
  [ARM] pxa/palmtx: misc fixes to use generic GPIO API
  ARM: OMAP: Fixes for suspend / resume GPIO wake-up handling
  [ARM] pxa/corgi: update default config to exclude tosa from being built
  [ARM] pxa/pcm990: use negative number for an invalid GPIO in camera data
  ARM: OMAP: Typo fix for clock_allow_idle
  ARM: OMAP: Remove broken LCD driver for SX1
  [ARM] 5335/1: pxa25x_udc: Fix is_vbus_present to return 1 or 0
  [ARM] pxa/MioA701: bluetooth resume fix
  [ARM] pxa/MioA701: fix memory corruption.

11 files changed, 135 insertions, 372 deletions

diff --git a/arch/arm/configs/corgi_defconfig b/arch/arm/configs/corgi_defconfig
index f3af0b593eb0..98765438048d 100644
--- a/arch/arm/configs/corgi_defconfig
+++ b/arch/arm/configs/corgi_defconfig
@@ -179,7 +179,7 @@ CONFIG_MACH_HUSKY=y
 # CONFIG_MACH_AKITA is not set
 # CONFIG_MACH_SPITZ is not set
 # CONFIG_MACH_BORZOI is not set
-CONFIG_MACH_TOSA=y
+# CONFIG_MACH_TOSA is not set
 # CONFIG_ARCH_VIPER is not set
 # CONFIG_ARCH_PXA_ESERIES is not set
 # CONFIG_TRIZEPS_PXA is not set
diff --git a/arch/arm/mach-pxa/mioa701.c b/arch/arm/mach-pxa/mioa701.c
index 0842c531ee4d..782903fe9c6c 100644
--- a/arch/arm/mach-pxa/mioa701.c
+++ b/arch/arm/mach-pxa/mioa701.c
@@ -565,7 +565,7 @@ static int mioa701_sys_suspend(struct sys_device *sysdev, pm_message_t state)
 	u32 *mem_resume_unknown	= phys_to_virt(RESUME_UNKNOWN_ADDR);
 
 	/* Devices prepare suspend */
-	is_bt_on = gpio_get_value(GPIO83_BT_ON);
+	is_bt_on = !!gpio_get_value(GPIO83_BT_ON);
 	pxa2xx_mfp_set_lpm(GPIO83_BT_ON,
 			   is_bt_on ? MFP_LPM_DRIVE_HIGH : MFP_LPM_DRIVE_LOW);
 
diff --git a/arch/arm/mach-pxa/mioa701_bootresume.S b/arch/arm/mach-pxa/mioa701_bootresume.S
index a647693d9856..324d25a48c85 100644
--- a/arch/arm/mach-pxa/mioa701_bootresume.S
+++ b/arch/arm/mach-pxa/mioa701_bootresume.S
@@ -24,6 +24,7 @@ ENTRY(mioa701_jumpaddr)
 1:
 	mov	r0,     #0xa0000000	@ Don't suppose memory access works
 	orr	r0, r0, #0x00200000	@ even if it's supposed to
+	orr	r0, r0, #0x0000b000
 	mov	r1, #0
 	str	r1, [r0]		@ Early disable resume for next boot
 	ldr	r0, mioa701_jumpaddr	@ (Murphy's Law)
diff --git a/arch/arm/mach-pxa/palmtx.c b/arch/arm/mach-pxa/palmtx.c
index 4447711c9fc6..a9d94f5dbec4 100644
--- a/arch/arm/mach-pxa/palmtx.c
+++ b/arch/arm/mach-pxa/palmtx.c
@@ -56,6 +56,9 @@ static unsigned long palmtx_pin_config[] __initdata = {
 	GPIO110_MMC_DAT_2,
 	GPIO111_MMC_DAT_3,
 	GPIO112_MMC_CMD,
+	GPIO14_GPIO,	/* SD detect */
+	GPIO114_GPIO,	/* SD power */
+	GPIO115_GPIO,	/* SD r/o switch */
 
 	/* AC97 */
 	GPIO28_AC97_BITCLK,
@@ -64,6 +67,7 @@ static unsigned long palmtx_pin_config[] __initdata = {
 	GPIO31_AC97_SYNC,
 
 	/* IrDA */
+	GPIO40_GPIO,	/* ir disable */
 	GPIO46_FICP_RXD,
 	GPIO47_FICP_TXD,
 
@@ -71,7 +75,8 @@ static unsigned long palmtx_pin_config[] __initdata = {
 	GPIO16_PWM0_OUT,
 
 	/* USB */
-	GPIO13_GPIO,
+	GPIO13_GPIO,	/* usb detect */
+	GPIO95_GPIO,	/* usb power */
 
 	/* PCMCIA */
 	GPIO48_nPOE,
@@ -84,6 +89,45 @@ static unsigned long palmtx_pin_config[] __initdata = {
 	GPIO55_nPREG,
 	GPIO56_nPWAIT,
 	GPIO57_nIOIS16,
+	GPIO94_GPIO,	/* wifi power 1 */
+	GPIO108_GPIO,	/* wifi power 2 */
+	GPIO116_GPIO,	/* wifi ready */
+
+	/* MATRIX KEYPAD */
+	GPIO100_KP_MKIN_0,
+	GPIO101_KP_MKIN_1,
+	GPIO102_KP_MKIN_2,
+	GPIO97_KP_MKIN_3,
+	GPIO103_KP_MKOUT_0,
+	GPIO104_KP_MKOUT_1,
+	GPIO105_KP_MKOUT_2,
+
+	/* LCD */
+	GPIO58_LCD_LDD_0,
+	GPIO59_LCD_LDD_1,
+	GPIO60_LCD_LDD_2,
+	GPIO61_LCD_LDD_3,
+	GPIO62_LCD_LDD_4,
+	GPIO63_LCD_LDD_5,
+	GPIO64_LCD_LDD_6,
+	GPIO65_LCD_LDD_7,
+	GPIO66_LCD_LDD_8,
+	GPIO67_LCD_LDD_9,
+	GPIO68_LCD_LDD_10,
+	GPIO69_LCD_LDD_11,
+	GPIO70_LCD_LDD_12,
+	GPIO71_LCD_LDD_13,
+	GPIO72_LCD_LDD_14,
+	GPIO73_LCD_LDD_15,
+	GPIO74_LCD_FCLK,
+	GPIO75_LCD_LCLK,
+	GPIO76_LCD_PCLK,
+	GPIO77_LCD_BIAS,
+
+	/* MISC. */
+	GPIO10_GPIO,	/* hotsync button */
+	GPIO12_GPIO,	/* power detect */
+	GPIO107_GPIO,	/* earphone detect */
 };
 
 /******************************************************************************
@@ -95,32 +139,49 @@ static int palmtx_mci_init(struct device *dev, irq_handler_t palmtx_detect_int,
 	int err = 0;
 
 	/* Setup an interrupt for detecting card insert/remove events */
-	err = request_irq(IRQ_GPIO_PALMTX_SD_DETECT_N, palmtx_detect_int,
-			IRQF_DISABLED | IRQF_SAMPLE_RANDOM |
+	err = gpio_request(GPIO_NR_PALMTX_SD_DETECT_N, "SD IRQ");
+	if (err)
+		goto err;
+	err = gpio_direction_input(GPIO_NR_PALMTX_SD_DETECT_N);
+	if (err)
+		goto err2;
+	err = request_irq(gpio_to_irq(GPIO_NR_PALMTX_SD_DETECT_N),
+			palmtx_detect_int, IRQF_DISABLED | IRQF_SAMPLE_RANDOM |
 			IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
 			"SD/MMC card detect", data);
 	if (err) {
 		printk(KERN_ERR "%s: cannot request SD/MMC card detect IRQ\n",
 				__func__);
-		return err;
+		goto err2;
 	}
 
 	err = gpio_request(GPIO_NR_PALMTX_SD_POWER, "SD_POWER");
 	if (err)
-		goto pwr_err;
+		goto err3;
+	err = gpio_direction_output(GPIO_NR_PALMTX_SD_POWER, 0);
+	if (err)
+		goto err4;
 
 	err = gpio_request(GPIO_NR_PALMTX_SD_READONLY, "SD_READONLY");
 	if (err)
-		goto ro_err;
+		goto err4;
+	err = gpio_direction_input(GPIO_NR_PALMTX_SD_READONLY);
+	if (err)
+		goto err5;
 
 	printk(KERN_DEBUG "%s: irq registered\n", __func__);
 
 	return 0;
 
-ro_err:
+err5:
+	gpio_free(GPIO_NR_PALMTX_SD_READONLY);
+err4:
 	gpio_free(GPIO_NR_PALMTX_SD_POWER);
-pwr_err:
-	free_irq(IRQ_GPIO_PALMTX_SD_DETECT_N, data);
+err3:
+	free_irq(gpio_to_irq(GPIO_NR_PALMTX_SD_DETECT_N), data);
+err2:
+	gpio_free(GPIO_NR_PALMTX_SD_DETECT_N);
+err:
 	return err;
 }
 
@@ -128,7 +189,8 @@ static void palmtx_mci_exit(struct device *dev, void *data)
 {
 	gpio_free(GPIO_NR_PALMTX_SD_READONLY);
 	gpio_free(GPIO_NR_PALMTX_SD_POWER);
-	free_irq(IRQ_GPIO_PALMTX_SD_DETECT_N, data);
+	free_irq(gpio_to_irq(GPIO_NR_PALMTX_SD_DETECT_N), data);
+	gpio_free(GPIO_NR_PALMTX_SD_DETECT_N);
 }
 
 static void palmtx_mci_power(struct device *dev, unsigned int vdd)
@@ -167,7 +229,6 @@ static unsigned int palmtx_matrix_keys[] = {
 
 	KEY(3, 0, KEY_RIGHT),
 	KEY(3, 2, KEY_LEFT),
-
 };
 
 static struct pxa27x_keypad_platform_data palmtx_keypad_platform_data = {
@@ -209,11 +270,19 @@ static int palmtx_backlight_init(struct device *dev)
 	ret = gpio_request(GPIO_NR_PALMTX_BL_POWER, "BL POWER");
 	if (ret)
 		goto err;
+	ret = gpio_direction_output(GPIO_NR_PALMTX_BL_POWER, 0);
+	if (ret)
+		goto err2;
 	ret = gpio_request(GPIO_NR_PALMTX_LCD_POWER, "LCD POWER");
 	if (ret)
 		goto err2;
+	ret = gpio_direction_output(GPIO_NR_PALMTX_LCD_POWER, 0);
+	if (ret)
+		goto err3;
 
 	return 0;
+err3:
+	gpio_free(GPIO_NR_PALMTX_LCD_POWER);
 err2:
 	gpio_free(GPIO_NR_PALMTX_BL_POWER);
 err:
@@ -254,6 +323,24 @@ static struct platform_device palmtx_backlight = {
 /******************************************************************************
  * IrDA
  ******************************************************************************/
+static int palmtx_irda_startup(struct device *dev)
+{
+	int err;
+	err = gpio_request(GPIO_NR_PALMTX_IR_DISABLE, "IR DISABLE");
+	if (err)
+		goto err;
+	err = gpio_direction_output(GPIO_NR_PALMTX_IR_DISABLE, 1);
+	if (err)
+		gpio_free(GPIO_NR_PALMTX_IR_DISABLE);
+err:
+	return err;
+}
+
+static void palmtx_irda_shutdown(struct device *dev)
+{
+	gpio_free(GPIO_NR_PALMTX_IR_DISABLE);
+}
+
 static void palmtx_irda_transceiver_mode(struct device *dev, int mode)
 {
 	gpio_set_value(GPIO_NR_PALMTX_IR_DISABLE, mode & IR_OFF);
@@ -261,6 +348,8 @@ static void palmtx_irda_transceiver_mode(struct device *dev, int mode)
 }
 
 static struct pxaficp_platform_data palmtx_ficp_platform_data = {
+	.startup		= palmtx_irda_startup,
+	.shutdown		= palmtx_irda_shutdown,
 	.transceiver_cap	= IR_SIRMODE | IR_FIRMODE | IR_OFF,
 	.transceiver_mode	= palmtx_irda_transceiver_mode,
 };
@@ -268,17 +357,11 @@ static struct pxaficp_platform_data palmtx_ficp_platform_data = {
 /******************************************************************************
  * UDC
  ******************************************************************************/
-static void palmtx_udc_command(int cmd)
-{
-	gpio_set_value(GPIO_NR_PALMTX_USB_POWER, !cmd);
-	udelay(50);
-	gpio_set_value(GPIO_NR_PALMTX_USB_PULLUP, !cmd);
-}
-
 static struct pxa2xx_udc_mach_info palmtx_udc_info __initdata = {
 	.gpio_vbus		= GPIO_NR_PALMTX_USB_DETECT_N,
 	.gpio_vbus_inverted	= 1,
-	.udc_command		= palmtx_udc_command,
+	.gpio_pullup		= GPIO_NR_PALMTX_USB_POWER,
+	.gpio_pullup_inverted	= 0,
 };
 
 /******************************************************************************
@@ -290,17 +373,16 @@ static int power_supply_init(struct device *dev)
 
 	ret = gpio_request(GPIO_NR_PALMTX_POWER_DETECT, "CABLE_STATE_AC");
 	if (ret)
-		goto err_cs_ac;
-
-	ret = gpio_request(GPIO_NR_PALMTX_USB_DETECT_N, "CABLE_STATE_USB");
+		goto err1;
+	ret = gpio_direction_input(GPIO_NR_PALMTX_POWER_DETECT);
 	if (ret)
-		goto err_cs_usb;
+		goto err2;
 
 	return 0;
 
-err_cs_usb:
+err2:
 	gpio_free(GPIO_NR_PALMTX_POWER_DETECT);
-err_cs_ac:
+err1:
 	return ret;
 }
 
@@ -309,14 +391,8 @@ static int palmtx_is_ac_online(void)
 	return gpio_get_value(GPIO_NR_PALMTX_POWER_DETECT);
 }
 
-static int palmtx_is_usb_online(void)
-{
-	return !gpio_get_value(GPIO_NR_PALMTX_USB_DETECT_N);
-}
-
 static void power_supply_exit(struct device *dev)
 {
-	gpio_free(GPIO_NR_PALMTX_USB_DETECT_N);
 	gpio_free(GPIO_NR_PALMTX_POWER_DETECT);
 }
 
@@ -327,7 +403,6 @@ static char *palmtx_supplicants[] = {
 static struct pda_power_pdata power_supply_info = {
 	.init            = power_supply_init,
 	.is_ac_online    = palmtx_is_ac_online,
-	.is_usb_online   = palmtx_is_usb_online,
 	.exit            = power_supply_exit,
 	.supplied_to     = palmtx_supplicants,
 	.num_supplicants = ARRAY_SIZE(palmtx_supplicants),
@@ -410,12 +485,23 @@ static void __init palmtx_map_io(void)
 	iotable_init(palmtx_io_desc, ARRAY_SIZE(palmtx_io_desc));
 }
 
+/* setup udc GPIOs initial state */
+static void __init palmtx_udc_init(void)
+{
+	if (!gpio_request(GPIO_NR_PALMTX_USB_POWER, "UDC Vbus")) {
+		gpio_direction_output(GPIO_NR_PALMTX_USB_POWER, 1);
+		gpio_free(GPIO_NR_PALMTX_USB_POWER);
+	}
+}
+
+
 static void __init palmtx_init(void)
 {
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(palmtx_pin_config));
 
 	set_pxa_fb_info(&palmtx_lcd_screen);
 	pxa_set_mci_info(&palmtx_mci_platform_data);
+	palmtx_udc_init();
 	pxa_set_udc_info(&palmtx_udc_info);
 	pxa_set_ac97_info(NULL);
 	pxa_set_ficp_info(&palmtx_ficp_platform_data);
diff --git a/arch/arm/mach-pxa/pcm990-baseboard.c b/arch/arm/mach-pxa/pcm990-baseboard.c
index f601425f1b1e..b36cec5c9eed 100644
--- a/arch/arm/mach-pxa/pcm990-baseboard.c
+++ b/arch/arm/mach-pxa/pcm990-baseboard.c
@@ -385,6 +385,7 @@ static struct soc_camera_link iclink[] = {
 		.gpio	= NR_BUILTIN_GPIO + 1,
 	}, {
 		.bus_id	= 0, /* Must match with the camera ID above */
+		.gpio	= -ENXIO,
 	}
 };
 
diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c
index 8679fbca6bbe..424049d83fbe 100644
--- a/arch/arm/plat-omap/gpio.c
+++ b/arch/arm/plat-omap/gpio.c
@@ -101,6 +101,7 @@
 #define OMAP24XX_GPIO_IRQSTATUS2	0x0028
 #define OMAP24XX_GPIO_IRQENABLE2	0x002c
 #define OMAP24XX_GPIO_IRQENABLE1	0x001c
+#define OMAP24XX_GPIO_WAKE_EN		0x0020
 #define OMAP24XX_GPIO_CTRL		0x0030
 #define OMAP24XX_GPIO_OE		0x0034
 #define OMAP24XX_GPIO_DATAIN		0x0038
@@ -1551,7 +1552,7 @@ static int omap_gpio_suspend(struct sys_device *dev, pm_message_t mesg)
 #endif
 #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
 		case METHOD_GPIO_24XX:
-			wake_status = bank->base + OMAP24XX_GPIO_SETWKUENA;
+			wake_status = bank->base + OMAP24XX_GPIO_WAKE_EN;
 			wake_clear = bank->base + OMAP24XX_GPIO_CLEARWKUENA;
 			wake_set = bank->base + OMAP24XX_GPIO_SETWKUENA;
 			break;
@@ -1574,7 +1575,7 @@ static int omap_gpio_resume(struct sys_device *dev)
 {
 	int i;
 
-	if (!cpu_is_omap24xx() && !cpu_is_omap16xx())
+	if (!cpu_class_is_omap2() && !cpu_is_omap16xx())
 		return 0;
 
 	for (i = 0; i < gpio_bank_count; i++) {
diff --git a/arch/arm/plat-omap/include/mach/pm.h b/arch/arm/plat-omap/include/mach/pm.h
index 768eb6e7abcf..2a9c27ad4c37 100644
--- a/arch/arm/plat-omap/include/mach/pm.h
+++ b/arch/arm/plat-omap/include/mach/pm.h
@@ -128,7 +128,7 @@ void clk_deny_idle(struct clk *clk);
  * clk_allow_idle - Counters previous clk_deny_idle
  * @clk: clock signal handle
  */
-void clk_deny_idle(struct clk *clk);
+void clk_allow_idle(struct clk *clk);
 
 extern void omap_pm_idle(void);
 extern void omap_pm_suspend(void);
diff --git a/drivers/usb/gadget/pxa25x_udc.c b/drivers/usb/gadget/pxa25x_udc.c
index da6e93c201d2..2dbc0db0b46c 100644
--- a/drivers/usb/gadget/pxa25x_udc.c
+++ b/drivers/usb/gadget/pxa25x_udc.c
@@ -141,7 +141,11 @@ static int is_vbus_present(void)
 
 	if (mach->gpio_vbus) {
 		int value = gpio_get_value(mach->gpio_vbus);
-		return mach->gpio_vbus_inverted ? !value : value;
+
+		if (mach->gpio_vbus_inverted)
+			return !value;
+		else
+			return !!value;
 	}
 	if (mach->udc_is_connected)
 		return mach->udc_is_connected();
@@ -982,7 +986,7 @@ static int pxa25x_udc_vbus_session(struct usb_gadget *_gadget, int is_active)
 	struct pxa25x_udc	*udc;
 
 	udc = container_of(_gadget, struct pxa25x_udc, gadget);
-	udc->vbus = (is_active != 0);
+	udc->vbus = is_active;
 	DMSG("vbus %s\n", is_active ? "supplied" : "inactive");
 	pullup(udc);
 	return 0;
@@ -1399,12 +1403,8 @@ lubbock_vbus_irq(int irq, void *_dev)
 static irqreturn_t udc_vbus_irq(int irq, void *_dev)
 {
 	struct pxa25x_udc	*dev = _dev;
-	int			vbus = gpio_get_value(dev->mach->gpio_vbus);
 
-	if (dev->mach->gpio_vbus_inverted)
-		vbus = !vbus;
-
-	pxa25x_udc_vbus_session(&dev->gadget, vbus);
+	pxa25x_udc_vbus_session(&dev->gadget, is_vbus_present());
 	return IRQ_HANDLED;
 }
 
diff --git a/drivers/video/omap/Makefile b/drivers/video/omap/Makefile
index 99da8b6d2c36..ed13889c1162 100644
--- a/drivers/video/omap/Makefile
+++ b/drivers/video/omap/Makefile
@@ -23,7 +23,6 @@ objs-y$(CONFIG_MACH_OMAP_PALMZ71) += lcd_palmz71.o
 objs-$(CONFIG_ARCH_OMAP16XX)$(CONFIG_MACH_OMAP_INNOVATOR) += lcd_inn1610.o
 objs-$(CONFIG_ARCH_OMAP15XX)$(CONFIG_MACH_OMAP_INNOVATOR) += lcd_inn1510.o
 objs-y$(CONFIG_MACH_OMAP_OSK) += lcd_osk.o
-objs-y$(CONFIG_MACH_SX1) += lcd_sx1.o
 
 omapfb-objs := $(objs-yy)
 
diff --git a/drivers/video/omap/lcd_sx1.c b/drivers/video/omap/lcd_sx1.c
deleted file mode 100644
index e55de201b8ff..000000000000
--- a/drivers/video/omap/lcd_sx1.c
+++ /dev/null
@@ -1,327 +0,0 @@
-/*
- * LCD panel support for the Siemens SX1 mobile phone
- *
- * Current version : Vovan888@gmail.com, great help from FCA00000
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
- */
-
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/io.h>
-
-#include <mach/gpio.h>
-#include <mach/omapfb.h>
-#include <mach/mcbsp.h>
-#include <mach/mux.h>
-
-/*
- * OMAP310 GPIO registers
- */
-#define GPIO_DATA_INPUT		0xfffce000
-#define GPIO_DATA_OUTPUT	0xfffce004
-#define GPIO_DIR_CONTROL	0xfffce008
-#define GPIO_INT_CONTROL	0xfffce00c
-#define GPIO_INT_MASK		0xfffce010
-#define GPIO_INT_STATUS		0xfffce014
-#define GPIO_PIN_CONTROL	0xfffce018
-
-
-#define A_LCD_SSC_RD	3
-#define A_LCD_SSC_SD	7
-#define _A_LCD_RESET	9
-#define _A_LCD_SSC_CS	12
-#define _A_LCD_SSC_A0	13
-
-#define DSP_REG		0xE1017024
-
-const unsigned char INIT_1[12] = {
-	0x1C, 0x02, 0x88, 0x00, 0x1E, 0xE0, 0x00, 0xDC, 0x00, 0x02, 0x00
-};
-
-const unsigned char INIT_2[127] = {
-	0x15, 0x00, 0x29, 0x00, 0x3E, 0x00, 0x51, 0x00,
-	0x65, 0x00, 0x7A, 0x00, 0x8D, 0x00, 0xA1, 0x00,
-	0xB6, 0x00, 0xC7, 0x00, 0xD8, 0x00, 0xEB, 0x00,
-	0xFB, 0x00, 0x0B, 0x01, 0x1B, 0x01, 0x27, 0x01,
-	0x34, 0x01, 0x41, 0x01, 0x4C, 0x01, 0x55, 0x01,
-	0x5F, 0x01, 0x68, 0x01, 0x70, 0x01, 0x78, 0x01,
-	0x7E, 0x01, 0x86, 0x01, 0x8C, 0x01, 0x94, 0x01,
-	0x9B, 0x01, 0xA1, 0x01, 0xA4, 0x01, 0xA9, 0x01,
-	0xAD, 0x01, 0xB2, 0x01, 0xB7, 0x01, 0xBC, 0x01,
-	0xC0, 0x01, 0xC4, 0x01, 0xC8, 0x01, 0xCB, 0x01,
-	0xCF, 0x01, 0xD2, 0x01, 0xD5, 0x01, 0xD8, 0x01,
-	0xDB, 0x01, 0xE0, 0x01, 0xE3, 0x01, 0xE6, 0x01,
-	0xE8, 0x01, 0xEB, 0x01, 0xEE, 0x01, 0xF1, 0x01,
-	0xF3, 0x01, 0xF8, 0x01, 0xF9, 0x01, 0xFC, 0x01,
-	0x00, 0x02, 0x03, 0x02, 0x07, 0x02, 0x09, 0x02,
-	0x0E, 0x02, 0x13, 0x02, 0x1C, 0x02, 0x00
-};
-
-const unsigned char INIT_3[15] = {
-	0x14, 0x26, 0x33, 0x3D, 0x45, 0x4D, 0x53, 0x59,
-	0x5E, 0x63, 0x67, 0x6D, 0x71, 0x78, 0xFF
-};
-
-static void epson_sendbyte(int flag, unsigned char byte)
-{
-	int i, shifter = 0x80;
-
-	if (!flag)
-		gpio_set_value(_A_LCD_SSC_A0, 0);
-	mdelay(2);
-	gpio_set_value(A_LCD_SSC_RD, 1);
-
-	gpio_set_value(A_LCD_SSC_SD, flag);
-
-	OMAP_MCBSP_WRITE(OMAP1510_MCBSP3_BASE, PCR0, 0x2200);
-	OMAP_MCBSP_WRITE(OMAP1510_MCBSP3_BASE, PCR0, 0x2202);
-	for (i = 0; i < 8; i++) {
-		OMAP_MCBSP_WRITE(OMAP1510_MCBSP3_BASE, PCR0, 0x2200);
-		gpio_set_value(A_LCD_SSC_SD, shifter & byte);
-		OMAP_MCBSP_WRITE(OMAP1510_MCBSP3_BASE, PCR0, 0x2202);
-		shifter >>= 1;
-	}
-	gpio_set_value(_A_LCD_SSC_A0, 1);
-}
-
-static void init_system(void)
-{
-	omap_mcbsp_request(OMAP_MCBSP3);
-	omap_mcbsp_stop(OMAP_MCBSP3);
-}
-
-static void setup_GPIO(void)
-{
-	/* new wave */
-	gpio_request(A_LCD_SSC_RD, "lcd_ssc_rd");
-	gpio_request(A_LCD_SSC_SD, "lcd_ssc_sd");
-	gpio_request(_A_LCD_RESET, "lcd_reset");
-	gpio_request(_A_LCD_SSC_CS, "lcd_ssc_cs");
-	gpio_request(_A_LCD_SSC_A0, "lcd_ssc_a0");
-
-	/* set GPIOs to output, with initial data */
-	gpio_direction_output(A_LCD_SSC_RD, 1);
-	gpio_direction_output(A_LCD_SSC_SD, 0);
-	gpio_direction_output(_A_LCD_RESET, 0);
-	gpio_direction_output(_A_LCD_SSC_CS, 1);
-	gpio_direction_output(_A_LCD_SSC_A0, 1);
-}
-
-static void display_init(void)
-{
-	int i;
-
-	omap_cfg_reg(MCBSP3_CLKX);
-
-	mdelay(2);
-	setup_GPIO();
-	mdelay(2);
-
-	/* reset LCD */
-	gpio_set_value(A_LCD_SSC_SD, 1);
-	epson_sendbyte(0, 0x25);
-
-	gpio_set_value(_A_LCD_RESET, 0);
-	mdelay(10);
-	gpio_set_value(_A_LCD_RESET, 1);
-
-	gpio_set_value(_A_LCD_SSC_CS, 1);
-	mdelay(2);
-	gpio_set_value(_A_LCD_SSC_CS, 0);
-
-	/* init LCD, phase 1 */
-	epson_sendbyte(0, 0xCA);
-	for (i = 0; i < 10; i++)
-		epson_sendbyte(1, INIT_1[i]);
-	gpio_set_value(_A_LCD_SSC_CS, 1);
-	gpio_set_value(_A_LCD_SSC_CS, 0);
-
-	/* init LCD phase 2 */
-	epson_sendbyte(0, 0xCB);
-	for (i = 0; i < 125; i++)
-		epson_sendbyte(1, INIT_2[i]);
-	gpio_set_value(_A_LCD_SSC_CS, 1);
-	gpio_set_value(_A_LCD_SSC_CS, 0);
-
-	/* init LCD phase 2a */
-	epson_sendbyte(0, 0xCC);
-	for (i = 0; i < 14; i++)
-		epson_sendbyte(1, INIT_3[i]);
-	gpio_set_value(_A_LCD_SSC_CS, 1);
-	gpio_set_value(_A_LCD_SSC_CS, 0);
-
-	/* init LCD phase 3 */
-	epson_sendbyte(0, 0xBC);
-	epson_sendbyte(1, 0x08);
-	gpio_set_value(_A_LCD_SSC_CS, 1);
-	gpio_set_value(_A_LCD_SSC_CS, 0);
-
-	/* init LCD phase 4 */
-	epson_sendbyte(0, 0x07);
-	epson_sendbyte(1, 0x05);
-	gpio_set_value(_A_LCD_SSC_CS, 1);
-	gpio_set_value(_A_LCD_SSC_CS, 0);
-
-	/* init LCD phase 5 */
-	epson_sendbyte(0, 0x94);
-	gpio_set_value(_A_LCD_SSC_CS, 1);
-	gpio_set_value(_A_LCD_SSC_CS, 0);
-
-	/* init LCD phase 6 */
-	epson_sendbyte(0, 0xC6);
-	epson_sendbyte(1, 0x80);
-	gpio_set_value(_A_LCD_SSC_CS, 1);
-	mdelay(100); /* used to be 1000 */
-	gpio_set_value(_A_LCD_SSC_CS, 0);
-
-	/* init LCD phase 7 */
-	epson_sendbyte(0, 0x16);
-	epson_sendbyte(1, 0x02);
-	epson_sendbyte(1, 0x00);
-	epson_sendbyte(1, 0xB1);
-	epson_sendbyte(1, 0x00);
-	gpio_set_value(_A_LCD_SSC_CS, 1);
-	gpio_set_value(_A_LCD_SSC_CS, 0);
-
-	/* init LCD phase 8 */
-	epson_sendbyte(0, 0x76);
-	epson_sendbyte(1, 0x00);
-	epson_sendbyte(1, 0x00);
-	epson_sendbyte(1, 0xDB);
-	epson_sendbyte(1, 0x00);
-	gpio_set_value(_A_LCD_SSC_CS, 1);
-	gpio_set_value(_A_LCD_SSC_CS, 0);
-
-	/* init LCD phase 9 */
-	epson_sendbyte(0, 0xAF);
-	gpio_set_value(_A_LCD_SSC_CS, 1);
-}
-
-static int sx1_panel_init(struct lcd_panel *panel, struct omapfb_device *fbdev)
-{
-	return 0;
-}
-
-static void sx1_panel_cleanup(struct lcd_panel *panel)
-{
-}
-
-static void sx1_panel_disable(struct lcd_panel *panel)
-{
-	printk(KERN_INFO "SX1: LCD panel disable\n");
-	sx1_setmmipower(0);
-	gpio_set_value(_A_LCD_SSC_CS, 1);
-
-	epson_sendbyte(0, 0x25);
-	gpio_set_value(_A_LCD_SSC_CS, 0);
-
-	epson_sendbyte(0, 0xAE);
-	gpio_set_value(_A_LCD_SSC_CS, 1);
-	mdelay(100);
-	gpio_set_value(_A_LCD_SSC_CS, 0);
-
-	epson_sendbyte(0, 0x95);
-	gpio_set_value(_A_LCD_SSC_CS, 1);
-}
-
-static int sx1_panel_enable(struct lcd_panel *panel)
-{
-	printk(KERN_INFO "lcd_sx1: LCD panel enable\n");
-	init_system();
-	display_init();
-
-	sx1_setmmipower(1);
-	sx1_setbacklight(0x18);
-	sx1_setkeylight (0x06);
-	return 0;
-}
-
-
-static unsigned long sx1_panel_get_caps(struct lcd_panel *panel)
-{
-	return 0;
-}
-
-struct lcd_panel sx1_panel = {
-	.name		= "sx1",
-	.config		= OMAP_LCDC_PANEL_TFT | OMAP_LCDC_INV_VSYNC |
-			  OMAP_LCDC_INV_HSYNC | OMAP_LCDC_INV_PIX_CLOCK |
-			  OMAP_LCDC_INV_OUTPUT_EN,
-
-	.x_res		= 176,
-	.y_res		= 220,
-	.data_lines	= 16,
-	.bpp		= 16,
-	.hsw		= 5,
-	.hfp		= 5,
-	.hbp		= 5,
-	.vsw		= 2,
-	.vfp		= 1,
-	.vbp		= 1,
-	.pixel_clock	= 1500,
-
-	.init		= sx1_panel_init,
-	.cleanup	= sx1_panel_cleanup,
-	.enable		= sx1_panel_enable,
-	.disable	= sx1_panel_disable,
-	.get_caps	= sx1_panel_get_caps,
-};
-
-static int sx1_panel_probe(struct platform_device *pdev)
-{
-	omapfb_register_panel(&sx1_panel);
-	return 0;
-}
-
-static int sx1_panel_remove(struct platform_device *pdev)
-{
-	return 0;
-}
-
-static int sx1_panel_suspend(struct platform_device *pdev, pm_message_t mesg)
-{
-	return 0;
-}
-
-static int sx1_panel_resume(struct platform_device *pdev)
-{
-	return 0;
-}
-
-struct platform_driver sx1_panel_driver = {
-	.probe		= sx1_panel_probe,
-	.remove		= sx1_panel_remove,
-	.suspend	= sx1_panel_suspend,
-	.resume		= sx1_panel_resume,
-	.driver	= {
-		.name	= "lcd_sx1",
-		.owner	= THIS_MODULE,
-	},
-};
-
-static int sx1_panel_drv_init(void)
-{
-	return platform_driver_register(&sx1_panel_driver);
-}
-
-static void sx1_panel_drv_cleanup(void)
-{
-	platform_driver_unregister(&sx1_panel_driver);
-}
-
-module_init(sx1_panel_drv_init);
-module_exit(sx1_panel_drv_cleanup);
diff --git a/include/linux/highmem.h b/include/linux/highmem.h
index 7dcbc82f3b7b..13875ce9112a 100644
--- a/include/linux/highmem.h
+++ b/include/linux/highmem.h
@@ -63,12 +63,14 @@ static inline void *kmap_atomic(struct page *page, enum km_type idx)
 #endif /* CONFIG_HIGHMEM */
 
 /* when CONFIG_HIGHMEM is not set these will be plain clear/copy_page */
+#ifndef clear_user_highpage
 static inline void clear_user_highpage(struct page *page, unsigned long vaddr)
 {
 	void *addr = kmap_atomic(page, KM_USER0);
 	clear_user_page(addr, vaddr, page);
 	kunmap_atomic(addr, KM_USER0);
 }
+#endif
 
 #ifndef __HAVE_ARCH_ALLOC_ZEROED_USER_HIGHPAGE
 /**