diff options
author | Jitao Shi <jitao.shi@mediatek.com> | 2016-11-16 11:20:54 +0800 |
---|---|---|
committer | CK Hu <ck.hu@mediatek.com> | 2016-11-24 14:53:14 +0800 |
commit | f6c872397028837c80685ee96c4011c62abe9a73 (patch) | |
tree | 47927838d25847c3dee50bb8c420d760c70a7373 | |
parent | 1ee6f347f81925fa8f3816e69ca1b49021f37850 (diff) | |
download | linux-f6c872397028837c80685ee96c4011c62abe9a73.tar.bz2 |
drm/mediatek: fixed the calc method of data rate per lane
Tune dsi frame rate by pixel clock, dsi add some extra signal (i.e.
Tlpx, Ths-prepare, Ths-zero, Ths-trail,Ths-exit) when enter and exit LP
mode, those signals will cause h-time larger than normal and reduce FPS.
So need to multiply a coefficient to offset the extra signal's effect.
coefficient = ((htotal*bpp/lane_number)+Tlpx+Ths_prep+Ths_zero+
Ths_trail+Ths_exit)/(htotal*bpp/lane_number)
Signed-off-by: Jitao Shi <jitao.shi@mediatek.com>
Reviewed-by: Daniel Kurtz <djkurtz@chromium.org>
-rw-r--r-- | drivers/gpu/drm/mediatek/mtk_dsi.c | 64 |
1 files changed, 48 insertions, 16 deletions
diff --git a/drivers/gpu/drm/mediatek/mtk_dsi.c b/drivers/gpu/drm/mediatek/mtk_dsi.c index 28b2044ed9f2..eaa5a2240c0c 100644 --- a/drivers/gpu/drm/mediatek/mtk_dsi.c +++ b/drivers/gpu/drm/mediatek/mtk_dsi.c @@ -86,7 +86,7 @@ #define DSI_PHY_TIMECON0 0x110 #define LPX (0xff << 0) -#define HS_PRPR (0xff << 8) +#define HS_PREP (0xff << 8) #define HS_ZERO (0xff << 16) #define HS_TRAIL (0xff << 24) @@ -102,10 +102,16 @@ #define CLK_TRAIL (0xff << 24) #define DSI_PHY_TIMECON3 0x11c -#define CLK_HS_PRPR (0xff << 0) +#define CLK_HS_PREP (0xff << 0) #define CLK_HS_POST (0xff << 8) #define CLK_HS_EXIT (0xff << 16) +#define T_LPX 5 +#define T_HS_PREP 6 +#define T_HS_TRAIL 8 +#define T_HS_EXIT 7 +#define T_HS_ZERO 10 + #define NS_TO_CYCLE(n, c) ((n) / (c) + (((n) % (c)) ? 1 : 0)) struct phy; @@ -161,20 +167,18 @@ static void mtk_dsi_mask(struct mtk_dsi *dsi, u32 offset, u32 mask, u32 data) static void dsi_phy_timconfig(struct mtk_dsi *dsi) { u32 timcon0, timcon1, timcon2, timcon3; - unsigned int ui, cycle_time; - unsigned int lpx; + u32 ui, cycle_time; ui = 1000 / dsi->data_rate + 0x01; cycle_time = 8000 / dsi->data_rate + 0x01; - lpx = 5; - timcon0 = (8 << 24) | (0xa << 16) | (0x6 << 8) | lpx; - timcon1 = (7 << 24) | (5 * lpx << 16) | ((3 * lpx) / 2) << 8 | - (4 * lpx); + timcon0 = T_LPX | T_HS_PREP << 8 | T_HS_ZERO << 16 | T_HS_TRAIL << 24; + timcon1 = 4 * T_LPX | (3 * T_LPX / 2) << 8 | 5 * T_LPX << 16 | + T_HS_EXIT << 24; timcon2 = ((NS_TO_CYCLE(0x64, cycle_time) + 0xa) << 24) | (NS_TO_CYCLE(0x150, cycle_time) << 16); - timcon3 = (2 * lpx) << 16 | NS_TO_CYCLE(80 + 52 * ui, cycle_time) << 8 | - NS_TO_CYCLE(0x40, cycle_time); + timcon3 = NS_TO_CYCLE(0x40, cycle_time) | (2 * T_LPX) << 16 | + NS_TO_CYCLE(80 + 52 * ui, cycle_time) << 8; writel(timcon0, dsi->regs + DSI_PHY_TIMECON0); writel(timcon1, dsi->regs + DSI_PHY_TIMECON1); @@ -202,19 +206,47 @@ static int mtk_dsi_poweron(struct mtk_dsi *dsi) { struct device *dev = dsi->dev; int ret; + u64 pixel_clock, total_bits; + u32 htotal, htotal_bits, bit_per_pixel, overhead_cycles, overhead_bits; if (++dsi->refcount != 1) return 0; + switch (dsi->format) { + case MIPI_DSI_FMT_RGB565: + bit_per_pixel = 16; + break; + case MIPI_DSI_FMT_RGB666_PACKED: + bit_per_pixel = 18; + break; + case MIPI_DSI_FMT_RGB666: + case MIPI_DSI_FMT_RGB888: + default: + bit_per_pixel = 24; + break; + } + /** - * data_rate = (pixel_clock / 1000) * pixel_dipth * mipi_ratio; - * pixel_clock unit is Khz, data_rata unit is MHz, so need divide 1000. - * mipi_ratio is mipi clk coefficient for balance the pixel clk in mipi. - * we set mipi_ratio is 1.05. + * vm.pixelclock is in kHz, pixel_clock unit is Hz, so multiply by 1000 + * htotal_time = htotal * byte_per_pixel / num_lanes + * overhead_time = lpx + hs_prepare + hs_zero + hs_trail + hs_exit + * mipi_ratio = (htotal_time + overhead_time) / htotal_time + * data_rate = pixel_clock * bit_per_pixel * mipi_ratio / num_lanes; */ - dsi->data_rate = dsi->vm.pixelclock * 3 * 21 / (1 * 1000 * 10); + pixel_clock = dsi->vm.pixelclock * 1000; + htotal = dsi->vm.hactive + dsi->vm.hback_porch + dsi->vm.hfront_porch + + dsi->vm.hsync_len; + htotal_bits = htotal * bit_per_pixel; + + overhead_cycles = T_LPX + T_HS_PREP + T_HS_ZERO + T_HS_TRAIL + + T_HS_EXIT; + overhead_bits = overhead_cycles * dsi->lanes * 8; + total_bits = htotal_bits + overhead_bits; + + dsi->data_rate = DIV_ROUND_UP_ULL(pixel_clock * total_bits, + htotal * dsi->lanes); - ret = clk_set_rate(dsi->hs_clk, dsi->data_rate * 1000000); + ret = clk_set_rate(dsi->hs_clk, dsi->data_rate); if (ret < 0) { dev_err(dev, "Failed to set data rate: %d\n", ret); goto err_refcount; |