summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorWu Fengguang <fengguang.wu@intel.com>2010-08-29 11:22:30 -0600
committerWu Fengguang <fengguang.wu@intel.com>2011-07-09 22:09:01 -0700
commite98be2d599207c6b31e9bb340d52a231b2f3662d (patch)
tree3ae28e7d621a6e2ddf8e7462f8d282901c113d5c
parentf7d2b1ecd0c714adefc7d3a942ef87beb828a763 (diff)
downloadlinux-e98be2d599207c6b31e9bb340d52a231b2f3662d.tar.bz2
writeback: bdi write bandwidth estimation
The estimation value will start from 100MB/s and adapt to the real bandwidth in seconds. It tries to update the bandwidth only when disk is fully utilized. Any inactive period of more than one second will be skipped. The estimated bandwidth will be reflecting how fast the device can writeout when _fully utilized_, and won't drop to 0 when it goes idle. The value will remain constant at disk idle time. At busy write time, if not considering fluctuations, it will also remain high unless be knocked down by possible concurrent reads that compete for the disk time and bandwidth with async writes. The estimation is not done purely in the flusher because there is no guarantee for write_cache_pages() to return timely to update bandwidth. The bdi->avg_write_bandwidth smoothing is very effective for filtering out sudden spikes, however may be a little biased in long term. The overheads are low because the bdi bandwidth update only occurs at 200ms intervals. The 200ms update interval is suitable, because it's not possible to get the real bandwidth for the instance at all, due to large fluctuations. The NFS commits can be as large as seconds worth of data. One XFS completion may be as large as half second worth of data if we are going to increase the write chunk to half second worth of data. In ext4, fluctuations with time period of around 5 seconds is observed. And there is another pattern of irregular periods of up to 20 seconds on SSD tests. That's why we are not only doing the estimation at 200ms intervals, but also averaging them over a period of 3 seconds and then go further to do another level of smoothing in avg_write_bandwidth. CC: Li Shaohua <shaohua.li@intel.com> CC: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
-rw-r--r--fs/fs-writeback.c13
-rw-r--r--include/linux/backing-dev.h5
-rw-r--r--include/linux/writeback.h3
-rw-r--r--mm/backing-dev.c12
-rw-r--r--mm/page-writeback.c87
5 files changed, 120 insertions, 0 deletions
diff --git a/fs/fs-writeback.c b/fs/fs-writeback.c
index 2c947da39f6e..5826992910e9 100644
--- a/fs/fs-writeback.c
+++ b/fs/fs-writeback.c
@@ -693,6 +693,16 @@ static inline bool over_bground_thresh(void)
}
/*
+ * Called under wb->list_lock. If there are multiple wb per bdi,
+ * only the flusher working on the first wb should do it.
+ */
+static void wb_update_bandwidth(struct bdi_writeback *wb,
+ unsigned long start_time)
+{
+ __bdi_update_bandwidth(wb->bdi, start_time);
+}
+
+/*
* Explicit flushing or periodic writeback of "old" data.
*
* Define "old": the first time one of an inode's pages is dirtied, we mark the
@@ -710,6 +720,7 @@ static inline bool over_bground_thresh(void)
static long wb_writeback(struct bdi_writeback *wb,
struct wb_writeback_work *work)
{
+ unsigned long wb_start = jiffies;
long nr_pages = work->nr_pages;
unsigned long oldest_jif;
struct inode *inode;
@@ -758,6 +769,8 @@ static long wb_writeback(struct bdi_writeback *wb,
progress = __writeback_inodes_wb(wb, work);
trace_writeback_written(wb->bdi, work);
+ wb_update_bandwidth(wb, wb_start);
+
/*
* Did we write something? Try for more
*
diff --git a/include/linux/backing-dev.h b/include/linux/backing-dev.h
index 469d56443c63..a008982e7c08 100644
--- a/include/linux/backing-dev.h
+++ b/include/linux/backing-dev.h
@@ -73,6 +73,11 @@ struct backing_dev_info {
struct percpu_counter bdi_stat[NR_BDI_STAT_ITEMS];
+ unsigned long bw_time_stamp; /* last time write bw is updated */
+ unsigned long written_stamp; /* pages written at bw_time_stamp */
+ unsigned long write_bandwidth; /* the estimated write bandwidth */
+ unsigned long avg_write_bandwidth; /* further smoothed write bw */
+
struct prop_local_percpu completions;
int dirty_exceeded;
diff --git a/include/linux/writeback.h b/include/linux/writeback.h
index df1b7f18f100..66862f2d90c8 100644
--- a/include/linux/writeback.h
+++ b/include/linux/writeback.h
@@ -118,6 +118,9 @@ void global_dirty_limits(unsigned long *pbackground, unsigned long *pdirty);
unsigned long bdi_dirty_limit(struct backing_dev_info *bdi,
unsigned long dirty);
+void __bdi_update_bandwidth(struct backing_dev_info *bdi,
+ unsigned long start_time);
+
void page_writeback_init(void);
void balance_dirty_pages_ratelimited_nr(struct address_space *mapping,
unsigned long nr_pages_dirtied);
diff --git a/mm/backing-dev.c b/mm/backing-dev.c
index 83f18a1d9d10..a76cdd160277 100644
--- a/mm/backing-dev.c
+++ b/mm/backing-dev.c
@@ -638,6 +638,11 @@ static void bdi_wb_init(struct bdi_writeback *wb, struct backing_dev_info *bdi)
setup_timer(&wb->wakeup_timer, wakeup_timer_fn, (unsigned long)bdi);
}
+/*
+ * Initial write bandwidth: 100 MB/s
+ */
+#define INIT_BW (100 << (20 - PAGE_SHIFT))
+
int bdi_init(struct backing_dev_info *bdi)
{
int i, err;
@@ -660,6 +665,13 @@ int bdi_init(struct backing_dev_info *bdi)
}
bdi->dirty_exceeded = 0;
+
+ bdi->bw_time_stamp = jiffies;
+ bdi->written_stamp = 0;
+
+ bdi->write_bandwidth = INIT_BW;
+ bdi->avg_write_bandwidth = INIT_BW;
+
err = prop_local_init_percpu(&bdi->completions);
if (err) {
diff --git a/mm/page-writeback.c b/mm/page-writeback.c
index 8cd71376c63d..446bdf7b975b 100644
--- a/mm/page-writeback.c
+++ b/mm/page-writeback.c
@@ -37,6 +37,11 @@
#include <trace/events/writeback.h>
/*
+ * Estimate write bandwidth at 200ms intervals.
+ */
+#define BANDWIDTH_INTERVAL max(HZ/5, 1)
+
+/*
* After a CPU has dirtied this many pages, balance_dirty_pages_ratelimited
* will look to see if it needs to force writeback or throttling.
*/
@@ -471,6 +476,85 @@ unsigned long bdi_dirty_limit(struct backing_dev_info *bdi, unsigned long dirty)
return bdi_dirty;
}
+static void bdi_update_write_bandwidth(struct backing_dev_info *bdi,
+ unsigned long elapsed,
+ unsigned long written)
+{
+ const unsigned long period = roundup_pow_of_two(3 * HZ);
+ unsigned long avg = bdi->avg_write_bandwidth;
+ unsigned long old = bdi->write_bandwidth;
+ u64 bw;
+
+ /*
+ * bw = written * HZ / elapsed
+ *
+ * bw * elapsed + write_bandwidth * (period - elapsed)
+ * write_bandwidth = ---------------------------------------------------
+ * period
+ */
+ bw = written - bdi->written_stamp;
+ bw *= HZ;
+ if (unlikely(elapsed > period)) {
+ do_div(bw, elapsed);
+ avg = bw;
+ goto out;
+ }
+ bw += (u64)bdi->write_bandwidth * (period - elapsed);
+ bw >>= ilog2(period);
+
+ /*
+ * one more level of smoothing, for filtering out sudden spikes
+ */
+ if (avg > old && old >= (unsigned long)bw)
+ avg -= (avg - old) >> 3;
+
+ if (avg < old && old <= (unsigned long)bw)
+ avg += (old - avg) >> 3;
+
+out:
+ bdi->write_bandwidth = bw;
+ bdi->avg_write_bandwidth = avg;
+}
+
+void __bdi_update_bandwidth(struct backing_dev_info *bdi,
+ unsigned long start_time)
+{
+ unsigned long now = jiffies;
+ unsigned long elapsed = now - bdi->bw_time_stamp;
+ unsigned long written;
+
+ /*
+ * rate-limit, only update once every 200ms.
+ */
+ if (elapsed < BANDWIDTH_INTERVAL)
+ return;
+
+ written = percpu_counter_read(&bdi->bdi_stat[BDI_WRITTEN]);
+
+ /*
+ * Skip quiet periods when disk bandwidth is under-utilized.
+ * (at least 1s idle time between two flusher runs)
+ */
+ if (elapsed > HZ && time_before(bdi->bw_time_stamp, start_time))
+ goto snapshot;
+
+ bdi_update_write_bandwidth(bdi, elapsed, written);
+
+snapshot:
+ bdi->written_stamp = written;
+ bdi->bw_time_stamp = now;
+}
+
+static void bdi_update_bandwidth(struct backing_dev_info *bdi,
+ unsigned long start_time)
+{
+ if (time_is_after_eq_jiffies(bdi->bw_time_stamp + BANDWIDTH_INTERVAL))
+ return;
+ spin_lock(&bdi->wb.list_lock);
+ __bdi_update_bandwidth(bdi, start_time);
+ spin_unlock(&bdi->wb.list_lock);
+}
+
/*
* balance_dirty_pages() must be called by processes which are generating dirty
* data. It looks at the number of dirty pages in the machine and will force
@@ -490,6 +574,7 @@ static void balance_dirty_pages(struct address_space *mapping,
unsigned long pause = 1;
bool dirty_exceeded = false;
struct backing_dev_info *bdi = mapping->backing_dev_info;
+ unsigned long start_time = jiffies;
for (;;) {
nr_reclaimable = global_page_state(NR_FILE_DIRTY) +
@@ -544,6 +629,8 @@ static void balance_dirty_pages(struct address_space *mapping,
if (!bdi->dirty_exceeded)
bdi->dirty_exceeded = 1;
+ bdi_update_bandwidth(bdi, start_time);
+
/* Note: nr_reclaimable denotes nr_dirty + nr_unstable.
* Unstable writes are a feature of certain networked
* filesystems (i.e. NFS) in which data may have been