summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorAntti Palosaari <crope@iki.fi>2013-07-30 17:22:25 -0300
committerMauro Carvalho Chehab <m.chehab@samsung.com>2013-08-18 07:55:06 -0300
commitdd0f5e0b75540f7bfca99c5a664c61ac90e52514 (patch)
tree6d1ebbfd9bab5908550cde612e3d1686ee7bc919
parente42efde4e4ce6bae9b728e8cc12ca73440204650 (diff)
downloadlinux-dd0f5e0b75540f7bfca99c5a664c61ac90e52514.tar.bz2
[media] dvb_usb_v2: get rid of deferred probe
Deferred probe was added in order to avoid udev vs. Kernel firmware download problems. It is not needed anymore. https://bugzilla.redhat.com/show_bug.cgi?id=827538 Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-rw-r--r--drivers/media/usb/dvb-usb-v2/dvb_usb.h5
-rw-r--r--drivers/media/usb/dvb-usb-v2/dvb_usb_core.c134
2 files changed, 45 insertions, 94 deletions
diff --git a/drivers/media/usb/dvb-usb-v2/dvb_usb.h b/drivers/media/usb/dvb-usb-v2/dvb_usb.h
index 399916bd588f..124b4baa7e97 100644
--- a/drivers/media/usb/dvb-usb-v2/dvb_usb.h
+++ b/drivers/media/usb/dvb-usb-v2/dvb_usb.h
@@ -352,9 +352,7 @@ struct dvb_usb_adapter {
* @rc_map: name of rc codes table
* @rc_polling_active: set when RC polling is active
* @udev: pointer to the device's struct usb_device
- * @intf: pointer to the device's usb interface
* @rc: remote controller configuration
- * @probe_work: work to defer .probe()
* @powered: indicated whether the device is power or not
* @usb_mutex: mutex for usb control messages
* @i2c_mutex: mutex for i2c-transfers
@@ -370,10 +368,7 @@ struct dvb_usb_device {
const char *rc_map;
bool rc_polling_active;
struct usb_device *udev;
- struct usb_interface *intf;
struct dvb_usb_rc rc;
- struct work_struct probe_work;
- pid_t work_pid;
int powered;
/* locking */
diff --git a/drivers/media/usb/dvb-usb-v2/dvb_usb_core.c b/drivers/media/usb/dvb-usb-v2/dvb_usb_core.c
index 19f6737d9817..8a054d66e708 100644
--- a/drivers/media/usb/dvb-usb-v2/dvb_usb_core.c
+++ b/drivers/media/usb/dvb-usb-v2/dvb_usb_core.c
@@ -833,20 +833,44 @@ err:
return ret;
}
-/*
- * udev, which is used for the firmware downloading, requires we cannot
- * block during module_init(). module_init() calls USB probe() which
- * is this routine. Due to that we delay actual operation using workqueue
- * and return always success here.
- */
-static void dvb_usbv2_init_work(struct work_struct *work)
+int dvb_usbv2_probe(struct usb_interface *intf,
+ const struct usb_device_id *id)
{
int ret;
- struct dvb_usb_device *d =
- container_of(work, struct dvb_usb_device, probe_work);
+ struct dvb_usb_device *d;
+ struct usb_device *udev = interface_to_usbdev(intf);
+ struct dvb_usb_driver_info *driver_info =
+ (struct dvb_usb_driver_info *) id->driver_info;
+
+ dev_dbg(&udev->dev, "%s: bInterfaceNumber=%d\n", __func__,
+ intf->cur_altsetting->desc.bInterfaceNumber);
+
+ if (!id->driver_info) {
+ dev_err(&udev->dev, "%s: driver_info failed\n", KBUILD_MODNAME);
+ ret = -ENODEV;
+ goto err;
+ }
+
+ d = kzalloc(sizeof(struct dvb_usb_device), GFP_KERNEL);
+ if (!d) {
+ dev_err(&udev->dev, "%s: kzalloc() failed\n", KBUILD_MODNAME);
+ ret = -ENOMEM;
+ goto err;
+ }
- d->work_pid = current->pid;
- dev_dbg(&d->udev->dev, "%s: work_pid=%d\n", __func__, d->work_pid);
+ d->name = driver_info->name;
+ d->rc_map = driver_info->rc_map;
+ d->udev = udev;
+ d->props = driver_info->props;
+
+ if (intf->cur_altsetting->desc.bInterfaceNumber !=
+ d->props->bInterfaceNumber) {
+ ret = -ENODEV;
+ goto err_free_all;
+ }
+
+ mutex_init(&d->usb_mutex);
+ mutex_init(&d->i2c_mutex);
if (d->props->size_of_priv) {
d->priv = kzalloc(d->props->size_of_priv, GFP_KERNEL);
@@ -854,7 +878,7 @@ static void dvb_usbv2_init_work(struct work_struct *work)
dev_err(&d->udev->dev, "%s: kzalloc() failed\n",
KBUILD_MODNAME);
ret = -ENOMEM;
- goto err_usb_driver_release_interface;
+ goto err_free_all;
}
}
@@ -884,20 +908,12 @@ static void dvb_usbv2_init_work(struct work_struct *work)
* device. As 'new' device is warm we should
* never go here again.
*/
- return;
+ goto exit;
} else {
- /*
- * Unexpected error. We must unregister driver
- * manually from the device, because device is
- * already register by returning from probe()
- * with success. usb_driver_release_interface()
- * finally calls disconnect() in order to free
- * resources.
- */
- goto err_usb_driver_release_interface;
+ goto err_free_all;
}
} else {
- goto err_usb_driver_release_interface;
+ goto err_free_all;
}
}
@@ -906,73 +922,17 @@ static void dvb_usbv2_init_work(struct work_struct *work)
ret = dvb_usbv2_init(d);
if (ret < 0)
- goto err_usb_driver_release_interface;
+ goto err_free_all;
dev_info(&d->udev->dev,
"%s: '%s' successfully initialized and connected\n",
KBUILD_MODNAME, d->name);
-
- return;
-err_usb_driver_release_interface:
- dev_info(&d->udev->dev, "%s: '%s' error while loading driver (%d)\n",
- KBUILD_MODNAME, d->name, ret);
- usb_driver_release_interface(to_usb_driver(d->intf->dev.driver),
- d->intf);
- dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret);
- return;
-}
-
-int dvb_usbv2_probe(struct usb_interface *intf,
- const struct usb_device_id *id)
-{
- int ret;
- struct dvb_usb_device *d;
- struct usb_device *udev = interface_to_usbdev(intf);
- struct dvb_usb_driver_info *driver_info =
- (struct dvb_usb_driver_info *) id->driver_info;
-
- dev_dbg(&udev->dev, "%s: bInterfaceNumber=%d\n", __func__,
- intf->cur_altsetting->desc.bInterfaceNumber);
-
- if (!id->driver_info) {
- dev_err(&udev->dev, "%s: driver_info failed\n", KBUILD_MODNAME);
- ret = -ENODEV;
- goto err;
- }
-
- d = kzalloc(sizeof(struct dvb_usb_device), GFP_KERNEL);
- if (!d) {
- dev_err(&udev->dev, "%s: kzalloc() failed\n", KBUILD_MODNAME);
- ret = -ENOMEM;
- goto err;
- }
-
- d->name = driver_info->name;
- d->rc_map = driver_info->rc_map;
- d->udev = udev;
- d->intf = intf;
- d->props = driver_info->props;
-
- if (d->intf->cur_altsetting->desc.bInterfaceNumber !=
- d->props->bInterfaceNumber) {
- ret = -ENODEV;
- goto err_kfree;
- }
-
- mutex_init(&d->usb_mutex);
- mutex_init(&d->i2c_mutex);
- INIT_WORK(&d->probe_work, dvb_usbv2_init_work);
+exit:
usb_set_intfdata(intf, d);
- ret = schedule_work(&d->probe_work);
- if (ret < 0) {
- dev_err(&d->udev->dev, "%s: schedule_work() failed\n",
- KBUILD_MODNAME);
- goto err_kfree;
- }
return 0;
-err_kfree:
- kfree(d);
+err_free_all:
+ dvb_usbv2_exit(d);
err:
dev_dbg(&udev->dev, "%s: failed=%d\n", __func__, ret);
return ret;
@@ -984,12 +944,8 @@ void dvb_usbv2_disconnect(struct usb_interface *intf)
struct dvb_usb_device *d = usb_get_intfdata(intf);
const char *name = d->name;
struct device dev = d->udev->dev;
- dev_dbg(&d->udev->dev, "%s: pid=%d work_pid=%d\n", __func__,
- current->pid, d->work_pid);
-
- /* ensure initialization work is finished until release resources */
- if (d->work_pid != current->pid)
- cancel_work_sync(&d->probe_work);
+ dev_dbg(&d->udev->dev, "%s: bInterfaceNumber=%d\n", __func__,
+ intf->cur_altsetting->desc.bInterfaceNumber);
if (d->props->exit)
d->props->exit(d);