summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorJohn Calixto <john.calixto@modsystems.com>2011-04-26 18:56:29 -0400
committerChris Ball <cjb@laptop.org>2011-05-24 21:02:54 -0400
commitcb87ea28ed9e75a41eb456bfcb547b4e6f10e750 (patch)
treee3fe4a653bd96815c650dd9f5db11edc6b39b0db
parent641c3187b9d53cfd4c23b0ce2ab18a13d5e775e5 (diff)
downloadlinux-cb87ea28ed9e75a41eb456bfcb547b4e6f10e750.tar.bz2
mmc: core: Add mmc CMD+ACMD passthrough ioctl
Allows appropriately-privileged applications to send CMD (normal) and ACMD (application-specific; preceded with CMD55) commands to cards/devices on the mmc bus. This is primarily useful for enabling the security functionality built in to every SD card. It can also be used as a generic passthrough (e.g. to enable virtual machines to control mmc bus devices directly). However, this use case has not been tested rigorously. Generic passthrough testing was only conducted for a few non-security opcodes to prove the feasibility of the passthrough. Since any opcode can be sent using this passthrough, it is very possible to render the card/device unusable. Applications that use this ioctl must have CAP_SYS_RAWIO. Security commands tested on TI PCIxx12 (SDHCI), Sigma Designs SMP8652 SoC, TI OMAP3621/OMAP3630 SoC, Samsung S5PC110 SoC, Qualcomm MSM7200A SoC. Signed-off-by: John Calixto <john.calixto@modsystems.com> Reviewed-by: Andrei Warkentin <andreiw@motorola.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Chris Ball <cjb@laptop.org>
-rw-r--r--Documentation/ioctl/ioctl-number.txt1
-rw-r--r--drivers/mmc/card/block.c201
-rw-r--r--drivers/mmc/core/sd_ops.c3
-rw-r--r--include/linux/Kbuild1
-rw-r--r--include/linux/mmc/Kbuild1
-rw-r--r--include/linux/mmc/core.h1
-rw-r--r--include/linux/mmc/ioctl.h54
7 files changed, 261 insertions, 1 deletions
diff --git a/Documentation/ioctl/ioctl-number.txt b/Documentation/ioctl/ioctl-number.txt
index a0a5d82b6b0b..2a34d822e6d6 100644
--- a/Documentation/ioctl/ioctl-number.txt
+++ b/Documentation/ioctl/ioctl-number.txt
@@ -304,6 +304,7 @@ Code Seq#(hex) Include File Comments
0xB0 all RATIO devices in development:
<mailto:vgo@ratio.de>
0xB1 00-1F PPPoX <mailto:mostrows@styx.uwaterloo.ca>
+0xB3 00 linux/mmc/ioctl.h
0xC0 00-0F linux/usb/iowarrior.h
0xCB 00-1F CBM serial IEC bus in development:
<mailto:michael.klein@puffin.lb.shuttle.de>
diff --git a/drivers/mmc/card/block.c b/drivers/mmc/card/block.c
index e7efd6faeaf9..407836d55712 100644
--- a/drivers/mmc/card/block.c
+++ b/drivers/mmc/card/block.c
@@ -31,7 +31,11 @@
#include <linux/mutex.h>
#include <linux/scatterlist.h>
#include <linux/string_helpers.h>
+#include <linux/delay.h>
+#include <linux/capability.h>
+#include <linux/compat.h>
+#include <linux/mmc/ioctl.h>
#include <linux/mmc/card.h>
#include <linux/mmc/host.h>
#include <linux/mmc/mmc.h>
@@ -218,11 +222,208 @@ mmc_blk_getgeo(struct block_device *bdev, struct hd_geometry *geo)
return 0;
}
+struct mmc_blk_ioc_data {
+ struct mmc_ioc_cmd ic;
+ unsigned char *buf;
+ u64 buf_bytes;
+};
+
+static struct mmc_blk_ioc_data *mmc_blk_ioctl_copy_from_user(
+ struct mmc_ioc_cmd __user *user)
+{
+ struct mmc_blk_ioc_data *idata;
+ int err;
+
+ idata = kzalloc(sizeof(*idata), GFP_KERNEL);
+ if (!idata) {
+ err = -ENOMEM;
+ goto copy_err;
+ }
+
+ if (copy_from_user(&idata->ic, user, sizeof(idata->ic))) {
+ err = -EFAULT;
+ goto copy_err;
+ }
+
+ idata->buf_bytes = (u64) idata->ic.blksz * idata->ic.blocks;
+ if (idata->buf_bytes > MMC_IOC_MAX_BYTES) {
+ err = -EOVERFLOW;
+ goto copy_err;
+ }
+
+ idata->buf = kzalloc(idata->buf_bytes, GFP_KERNEL);
+ if (!idata->buf) {
+ err = -ENOMEM;
+ goto copy_err;
+ }
+
+ if (copy_from_user(idata->buf, (void __user *)(unsigned long)
+ idata->ic.data_ptr, idata->buf_bytes)) {
+ err = -EFAULT;
+ goto copy_err;
+ }
+
+ return idata;
+
+copy_err:
+ kfree(idata->buf);
+ kfree(idata);
+ return ERR_PTR(err);
+
+}
+
+static int mmc_blk_ioctl_cmd(struct block_device *bdev,
+ struct mmc_ioc_cmd __user *ic_ptr)
+{
+ struct mmc_blk_ioc_data *idata;
+ struct mmc_blk_data *md;
+ struct mmc_card *card;
+ struct mmc_command cmd = {0};
+ struct mmc_data data = {0};
+ struct mmc_request mrq = {0};
+ struct scatterlist sg;
+ int err;
+
+ /*
+ * The caller must have CAP_SYS_RAWIO, and must be calling this on the
+ * whole block device, not on a partition. This prevents overspray
+ * between sibling partitions.
+ */
+ if ((!capable(CAP_SYS_RAWIO)) || (bdev != bdev->bd_contains))
+ return -EPERM;
+
+ idata = mmc_blk_ioctl_copy_from_user(ic_ptr);
+ if (IS_ERR(idata))
+ return PTR_ERR(idata);
+
+ cmd.opcode = idata->ic.opcode;
+ cmd.arg = idata->ic.arg;
+ cmd.flags = idata->ic.flags;
+
+ data.sg = &sg;
+ data.sg_len = 1;
+ data.blksz = idata->ic.blksz;
+ data.blocks = idata->ic.blocks;
+
+ sg_init_one(data.sg, idata->buf, idata->buf_bytes);
+
+ if (idata->ic.write_flag)
+ data.flags = MMC_DATA_WRITE;
+ else
+ data.flags = MMC_DATA_READ;
+
+ mrq.cmd = &cmd;
+ mrq.data = &data;
+
+ md = mmc_blk_get(bdev->bd_disk);
+ if (!md) {
+ err = -EINVAL;
+ goto cmd_done;
+ }
+
+ card = md->queue.card;
+ if (IS_ERR(card)) {
+ err = PTR_ERR(card);
+ goto cmd_done;
+ }
+
+ mmc_claim_host(card->host);
+
+ if (idata->ic.is_acmd) {
+ err = mmc_app_cmd(card->host, card);
+ if (err)
+ goto cmd_rel_host;
+ }
+
+ /* data.flags must already be set before doing this. */
+ mmc_set_data_timeout(&data, card);
+ /* Allow overriding the timeout_ns for empirical tuning. */
+ if (idata->ic.data_timeout_ns)
+ data.timeout_ns = idata->ic.data_timeout_ns;
+
+ if ((cmd.flags & MMC_RSP_R1B) == MMC_RSP_R1B) {
+ /*
+ * Pretend this is a data transfer and rely on the host driver
+ * to compute timeout. When all host drivers support
+ * cmd.cmd_timeout for R1B, this can be changed to:
+ *
+ * mrq.data = NULL;
+ * cmd.cmd_timeout = idata->ic.cmd_timeout_ms;
+ */
+ data.timeout_ns = idata->ic.cmd_timeout_ms * 1000000;
+ }
+
+ mmc_wait_for_req(card->host, &mrq);
+
+ if (cmd.error) {
+ dev_err(mmc_dev(card->host), "%s: cmd error %d\n",
+ __func__, cmd.error);
+ err = cmd.error;
+ goto cmd_rel_host;
+ }
+ if (data.error) {
+ dev_err(mmc_dev(card->host), "%s: data error %d\n",
+ __func__, data.error);
+ err = data.error;
+ goto cmd_rel_host;
+ }
+
+ /*
+ * According to the SD specs, some commands require a delay after
+ * issuing the command.
+ */
+ if (idata->ic.postsleep_min_us)
+ usleep_range(idata->ic.postsleep_min_us, idata->ic.postsleep_max_us);
+
+ if (copy_to_user(&(ic_ptr->response), cmd.resp, sizeof(cmd.resp))) {
+ err = -EFAULT;
+ goto cmd_rel_host;
+ }
+
+ if (!idata->ic.write_flag) {
+ if (copy_to_user((void __user *)(unsigned long) idata->ic.data_ptr,
+ idata->buf, idata->buf_bytes)) {
+ err = -EFAULT;
+ goto cmd_rel_host;
+ }
+ }
+
+cmd_rel_host:
+ mmc_release_host(card->host);
+
+cmd_done:
+ mmc_blk_put(md);
+ kfree(idata->buf);
+ kfree(idata);
+ return err;
+}
+
+static int mmc_blk_ioctl(struct block_device *bdev, fmode_t mode,
+ unsigned int cmd, unsigned long arg)
+{
+ int ret = -EINVAL;
+ if (cmd == MMC_IOC_CMD)
+ ret = mmc_blk_ioctl_cmd(bdev, (struct mmc_ioc_cmd __user *)arg);
+ return ret;
+}
+
+#ifdef CONFIG_COMPAT
+static int mmc_blk_compat_ioctl(struct block_device *bdev, fmode_t mode,
+ unsigned int cmd, unsigned long arg)
+{
+ return mmc_blk_ioctl(bdev, mode, cmd, (unsigned long) compat_ptr(arg));
+}
+#endif
+
static const struct block_device_operations mmc_bdops = {
.open = mmc_blk_open,
.release = mmc_blk_release,
.getgeo = mmc_blk_getgeo,
.owner = THIS_MODULE,
+ .ioctl = mmc_blk_ioctl,
+#ifdef CONFIG_COMPAT
+ .compat_ioctl = mmc_blk_compat_ioctl,
+#endif
};
struct mmc_blk_request {
diff --git a/drivers/mmc/core/sd_ops.c b/drivers/mmc/core/sd_ops.c
index a206aea5360d..021fed153804 100644
--- a/drivers/mmc/core/sd_ops.c
+++ b/drivers/mmc/core/sd_ops.c
@@ -21,7 +21,7 @@
#include "core.h"
#include "sd_ops.h"
-static int mmc_app_cmd(struct mmc_host *host, struct mmc_card *card)
+int mmc_app_cmd(struct mmc_host *host, struct mmc_card *card)
{
int err;
struct mmc_command cmd = {0};
@@ -49,6 +49,7 @@ static int mmc_app_cmd(struct mmc_host *host, struct mmc_card *card)
return 0;
}
+EXPORT_SYMBOL_GPL(mmc_app_cmd);
/**
* mmc_wait_for_app_cmd - start an application command and wait for
diff --git a/include/linux/Kbuild b/include/linux/Kbuild
index 75cf611641e6..ed38527599ee 100644
--- a/include/linux/Kbuild
+++ b/include/linux/Kbuild
@@ -4,6 +4,7 @@ header-y += caif/
header-y += dvb/
header-y += hdlc/
header-y += isdn/
+header-y += mmc/
header-y += nfsd/
header-y += raid/
header-y += spi/
diff --git a/include/linux/mmc/Kbuild b/include/linux/mmc/Kbuild
new file mode 100644
index 000000000000..1fb26448faa9
--- /dev/null
+++ b/include/linux/mmc/Kbuild
@@ -0,0 +1 @@
+header-y += ioctl.h
diff --git a/include/linux/mmc/core.h b/include/linux/mmc/core.h
index f8e4bcbd2846..cbe8d55f64c4 100644
--- a/include/linux/mmc/core.h
+++ b/include/linux/mmc/core.h
@@ -133,6 +133,7 @@ struct mmc_card;
extern void mmc_wait_for_req(struct mmc_host *, struct mmc_request *);
extern int mmc_wait_for_cmd(struct mmc_host *, struct mmc_command *, int);
+extern int mmc_app_cmd(struct mmc_host *, struct mmc_card *);
extern int mmc_wait_for_app_cmd(struct mmc_host *, struct mmc_card *,
struct mmc_command *, int);
extern int mmc_switch(struct mmc_card *, u8, u8, u8, unsigned int);
diff --git a/include/linux/mmc/ioctl.h b/include/linux/mmc/ioctl.h
new file mode 100644
index 000000000000..5baf2983a12f
--- /dev/null
+++ b/include/linux/mmc/ioctl.h
@@ -0,0 +1,54 @@
+#ifndef LINUX_MMC_IOCTL_H
+#define LINUX_MMC_IOCTL_H
+struct mmc_ioc_cmd {
+ /* Implies direction of data. true = write, false = read */
+ int write_flag;
+
+ /* Application-specific command. true = precede with CMD55 */
+ int is_acmd;
+
+ __u32 opcode;
+ __u32 arg;
+ __u32 response[4]; /* CMD response */
+ unsigned int flags;
+ unsigned int blksz;
+ unsigned int blocks;
+
+ /*
+ * Sleep at least postsleep_min_us useconds, and at most
+ * postsleep_max_us useconds *after* issuing command. Needed for
+ * some read commands for which cards have no other way of indicating
+ * they're ready for the next command (i.e. there is no equivalent of
+ * a "busy" indicator for read operations).
+ */
+ unsigned int postsleep_min_us;
+ unsigned int postsleep_max_us;
+
+ /*
+ * Override driver-computed timeouts. Note the difference in units!
+ */
+ unsigned int data_timeout_ns;
+ unsigned int cmd_timeout_ms;
+
+ /*
+ * For 64-bit machines, the next member, ``__u64 data_ptr``, wants to
+ * be 8-byte aligned. Make sure this struct is the same size when
+ * built for 32-bit.
+ */
+ __u32 __pad;
+
+ /* DAT buffer */
+ __u64 data_ptr;
+};
+#define mmc_ioc_cmd_set_data(ic, ptr) ic.data_ptr = (__u64)(unsigned long) ptr
+
+#define MMC_IOC_CMD _IOWR(MMC_BLOCK_MAJOR, 0, struct mmc_ioc_cmd)
+
+/*
+ * Since this ioctl is only meant to enhance (and not replace) normal access
+ * to the mmc bus device, an upper data transfer limit of MMC_IOC_MAX_BYTES
+ * is enforced per ioctl call. For larger data transfers, use the normal
+ * block device operations.
+ */
+#define MMC_IOC_MAX_BYTES (512L * 256)
+#endif /* LINUX_MMC_IOCTL_H */