summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorJean Delvare <khali@linux-fr.org>2009-10-04 22:53:42 +0200
committerJean Delvare <khali@linux-fr.org>2009-10-04 22:53:42 +0200
commit2d2a7cff1b63cde1e2d981eea8ae9e69ae9ce96d (patch)
tree73e2422c4d4836c770c6ba0269f1bcf002f9d48b
parent0314b020c49c1d6cd182d2b89775bfa6686660db (diff)
downloadlinux-2d2a7cff1b63cde1e2d981eea8ae9e69ae9ce96d.tar.bz2
ltc4215/ltc4245: Discard obsolete detect methods
There is no point in implementing a detect callback for the LTC4215 and LTC4245, as these devices can't be detected. It was there solely to handle "force" module parameters to instantiate devices, but now we have a better sysfs interface that can do the same. So we can get rid of the ugly module parameters and the detect callbacks. This shrinks the binary module sizes by 36% and 46%, respectively. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Ira W. Snyder <iws@ovro.caltech.edu>
-rw-r--r--Documentation/hwmon/ltc42157
-rw-r--r--Documentation/hwmon/ltc42457
-rw-r--r--drivers/hwmon/ltc4215.c47
-rw-r--r--drivers/hwmon/ltc4245.c131
4 files changed, 18 insertions, 174 deletions
diff --git a/Documentation/hwmon/ltc4215 b/Documentation/hwmon/ltc4215
index 2e6a21eb656c..c196a1846259 100644
--- a/Documentation/hwmon/ltc4215
+++ b/Documentation/hwmon/ltc4215
@@ -22,12 +22,13 @@ Usage Notes
-----------
This driver does not probe for LTC4215 devices, due to the fact that some
-of the possible addresses are unfriendly to probing. You will need to use
-the "force" parameter to tell the driver where to find the device.
+of the possible addresses are unfriendly to probing. You will have to
+instantiate the devices explicitly.
Example: the following will load the driver for an LTC4215 at address 0x44
on I2C bus #0:
-$ modprobe ltc4215 force=0,0x44
+$ modprobe ltc4215
+$ echo ltc4215 0x44 > /sys/bus/i2c/devices/i2c-0/new_device
Sysfs entries
diff --git a/Documentation/hwmon/ltc4245 b/Documentation/hwmon/ltc4245
index bae7a3adc5d8..02838a47d862 100644
--- a/Documentation/hwmon/ltc4245
+++ b/Documentation/hwmon/ltc4245
@@ -23,12 +23,13 @@ Usage Notes
-----------
This driver does not probe for LTC4245 devices, due to the fact that some
-of the possible addresses are unfriendly to probing. You will need to use
-the "force" parameter to tell the driver where to find the device.
+of the possible addresses are unfriendly to probing. You will have to
+instantiate the devices explicitly.
Example: the following will load the driver for an LTC4245 at address 0x23
on I2C bus #1:
-$ modprobe ltc4245 force=1,0x23
+$ modprobe ltc4245
+$ echo ltc4245 0x23 > /sys/bus/i2c/devices/i2c-1/new_device
Sysfs entries
diff --git a/drivers/hwmon/ltc4215.c b/drivers/hwmon/ltc4215.c
index 6c9a04136e0a..00d975eb5b83 100644
--- a/drivers/hwmon/ltc4215.c
+++ b/drivers/hwmon/ltc4215.c
@@ -20,11 +20,6 @@
#include <linux/hwmon.h>
#include <linux/hwmon-sysfs.h>
-static const unsigned short normal_i2c[] = { I2C_CLIENT_END };
-
-/* Insmod parameters */
-I2C_CLIENT_INSMOD_1(ltc4215);
-
/* Here are names of the chip's registers (a.k.a. commands) */
enum ltc4215_cmd {
LTC4215_CONTROL = 0x00, /* rw */
@@ -246,9 +241,13 @@ static const struct attribute_group ltc4215_group = {
static int ltc4215_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
+ struct i2c_adapter *adapter = client->adapter;
struct ltc4215_data *data;
int ret;
+ if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
+ return -ENODEV;
+
data = kzalloc(sizeof(*data), GFP_KERNEL);
if (!data) {
ret = -ENOMEM;
@@ -294,56 +293,20 @@ static int ltc4215_remove(struct i2c_client *client)
return 0;
}
-static int ltc4215_detect(struct i2c_client *client,
- int kind,
- struct i2c_board_info *info)
-{
- struct i2c_adapter *adapter = client->adapter;
-
- if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
- return -ENODEV;
-
- if (kind < 0) { /* probed detection - check the chip type */
- s32 v; /* 8 bits from the chip, or -ERRNO */
-
- /*
- * Register 0x01 bit b7 is reserved, expect 0
- * Register 0x03 bit b6 and b7 are reserved, expect 0
- */
- v = i2c_smbus_read_byte_data(client, LTC4215_ALERT);
- if (v < 0 || (v & (1 << 7)) != 0)
- return -ENODEV;
-
- v = i2c_smbus_read_byte_data(client, LTC4215_FAULT);
- if (v < 0 || (v & ((1 << 6) | (1 << 7))) != 0)
- return -ENODEV;
- }
-
- strlcpy(info->type, "ltc4215", I2C_NAME_SIZE);
- dev_info(&adapter->dev, "ltc4215 %s at address 0x%02x\n",
- kind < 0 ? "probed" : "forced",
- client->addr);
-
- return 0;
-}
-
static const struct i2c_device_id ltc4215_id[] = {
- { "ltc4215", ltc4215 },
+ { "ltc4215", 0 },
{ }
};
MODULE_DEVICE_TABLE(i2c, ltc4215_id);
/* This is the driver that will be inserted */
static struct i2c_driver ltc4215_driver = {
- .class = I2C_CLASS_HWMON,
.driver = {
.name = "ltc4215",
},
.probe = ltc4215_probe,
.remove = ltc4215_remove,
.id_table = ltc4215_id,
- .detect = ltc4215_detect,
- .address_data = &addr_data,
};
static int __init ltc4215_init(void)
diff --git a/drivers/hwmon/ltc4245.c b/drivers/hwmon/ltc4245.c
index e38964333612..65c232a9d0c5 100644
--- a/drivers/hwmon/ltc4245.c
+++ b/drivers/hwmon/ltc4245.c
@@ -22,15 +22,6 @@
#include <linux/hwmon.h>
#include <linux/hwmon-sysfs.h>
-/* Valid addresses are 0x20 - 0x3f
- *
- * For now, we do not probe, since some of these addresses
- * are known to be unfriendly to probing */
-static const unsigned short normal_i2c[] = { I2C_CLIENT_END };
-
-/* Insmod parameters */
-I2C_CLIENT_INSMOD_1(ltc4245);
-
/* Here are names of the chip's registers (a.k.a. commands) */
enum ltc4245_cmd {
LTC4245_STATUS = 0x00, /* readonly */
@@ -369,9 +360,13 @@ static const struct attribute_group ltc4245_group = {
static int ltc4245_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
+ struct i2c_adapter *adapter = client->adapter;
struct ltc4245_data *data;
int ret;
+ if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
+ return -ENODEV;
+
data = kzalloc(sizeof(*data), GFP_KERNEL);
if (!data) {
ret = -ENOMEM;
@@ -418,136 +413,20 @@ static int ltc4245_remove(struct i2c_client *client)
return 0;
}
-/* Check that some bits in a control register appear at all possible
- * locations without changing value
- *
- * @client: the i2c client to use
- * @reg: the register to read
- * @bits: the bits to check (0xff checks all bits,
- * 0x03 checks only the last two bits)
- *
- * return -ERRNO if the register read failed
- * return -ENODEV if the register value doesn't stay constant at all
- * possible addresses
- *
- * return 0 for success
- */
-static int ltc4245_check_control_reg(struct i2c_client *client, u8 reg, u8 bits)
-{
- int i;
- s32 v, voff1, voff2;
-
- /* Read register and check for error */
- v = i2c_smbus_read_byte_data(client, reg);
- if (v < 0)
- return v;
-
- v &= bits;
-
- for (i = 0x00; i < 0xff; i += 0x20) {
-
- voff1 = i2c_smbus_read_byte_data(client, reg + i);
- if (voff1 < 0)
- return voff1;
-
- voff2 = i2c_smbus_read_byte_data(client, reg + i + 0x08);
- if (voff2 < 0)
- return voff2;
-
- voff1 &= bits;
- voff2 &= bits;
-
- if (v != voff1 || v != voff2)
- return -ENODEV;
- }
-
- return 0;
-}
-
-static int ltc4245_detect(struct i2c_client *client,
- int kind,
- struct i2c_board_info *info)
-{
- struct i2c_adapter *adapter = client->adapter;
-
- if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
- return -ENODEV;
-
- if (kind < 0) { /* probed detection - check the chip type */
- s32 v; /* 8 bits from the chip, or -ERRNO */
-
- /* Chip registers 0x00-0x07 are control registers
- * Chip registers 0x10-0x1f are data registers
- *
- * Address bits b7-b5 are ignored. This makes the chip "repeat"
- * in steps of 0x20. Any control registers should appear with
- * the same values across all duplicated addresses.
- *
- * Register 0x02 bit b2 is reserved, expect 0
- * Register 0x07 bits b7 to b4 are reserved, expect 0
- *
- * Registers 0x01, 0x02 are control registers and should not
- * change on their own.
- *
- * Register 0x06 bits b6 and b7 are control bits, and should
- * not change on their own.
- *
- * Register 0x07 bits b3 to b0 are control bits, and should
- * not change on their own.
- */
-
- /* read register 0x02 reserved bit, expect 0 */
- v = i2c_smbus_read_byte_data(client, LTC4245_CONTROL);
- if (v < 0 || (v & 0x04) != 0)
- return -ENODEV;
-
- /* read register 0x07 reserved bits, expect 0 */
- v = i2c_smbus_read_byte_data(client, LTC4245_ADCADR);
- if (v < 0 || (v & 0xf0) != 0)
- return -ENODEV;
-
- /* check that the alert register appears at all locations */
- if (ltc4245_check_control_reg(client, LTC4245_ALERT, 0xff))
- return -ENODEV;
-
- /* check that the control register appears at all locations */
- if (ltc4245_check_control_reg(client, LTC4245_CONTROL, 0xff))
- return -ENODEV;
-
- /* check that register 0x06 bits b6 and b7 stay constant */
- if (ltc4245_check_control_reg(client, LTC4245_GPIO, 0xc0))
- return -ENODEV;
-
- /* check that register 0x07 bits b3-b0 stay constant */
- if (ltc4245_check_control_reg(client, LTC4245_ADCADR, 0x0f))
- return -ENODEV;
- }
-
- strlcpy(info->type, "ltc4245", I2C_NAME_SIZE);
- dev_info(&adapter->dev, "ltc4245 %s at address 0x%02x\n",
- kind < 0 ? "probed" : "forced",
- client->addr);
-
- return 0;
-}
-
static const struct i2c_device_id ltc4245_id[] = {
- { "ltc4245", ltc4245 },
+ { "ltc4245", 0 },
{ }
};
MODULE_DEVICE_TABLE(i2c, ltc4245_id);
/* This is the driver that will be inserted */
static struct i2c_driver ltc4245_driver = {
- .class = I2C_CLASS_HWMON,
.driver = {
.name = "ltc4245",
},
.probe = ltc4245_probe,
.remove = ltc4245_remove,
.id_table = ltc4245_id,
- .detect = ltc4245_detect,
- .address_data = &addr_data,
};
static int __init ltc4245_init(void)