summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorViresh Kumar <viresh.kumar@st.com>2012-02-01 16:12:27 +0530
committerVinod Koul <vinod.koul@linux.intel.com>2012-02-22 18:15:39 +0530
commite2b35f3dbfc080f15b72834d08f04f0269dbe9be (patch)
treefda60f8be147b57cf01155528dda33a9a99b0dab
parent327e6970258618da810f72e86cf2a8b803927e14 (diff)
downloadlinux-e2b35f3dbfc080f15b72834d08f04f0269dbe9be.tar.bz2
dmaengine/dw_dmac: Fix dw_dmac user drivers to adapt to slave_config changes
There are few existing user drivers of dw_dmac. They will break as soon as we remove unused fields from struct dw_dma_slave. This patch focuses to fix these user drivers to use dma_slave_config() routine. Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
-rw-r--r--arch/avr32/mach-at32ap/at32ap700x.c13
-rw-r--r--arch/avr32/mach-at32ap/include/mach/atmel-mci.h7
-rw-r--r--drivers/mmc/host/atmel-mci.c24
-rw-r--r--sound/atmel/abdac.c18
-rw-r--r--sound/atmel/ac97c.c41
5 files changed, 63 insertions, 40 deletions
diff --git a/arch/avr32/mach-at32ap/at32ap700x.c b/arch/avr32/mach-at32ap/at32ap700x.c
index 402a7bb72669..43c44e77d83c 100644
--- a/arch/avr32/mach-at32ap/at32ap700x.c
+++ b/arch/avr32/mach-at32ap/at32ap700x.c
@@ -1353,7 +1353,6 @@ at32_add_device_mci(unsigned int id, struct mci_platform_data *data)
goto fail;
slave->sdata.dma_dev = &dw_dmac0_device.dev;
- slave->sdata.reg_width = DW_DMA_SLAVE_WIDTH_32BIT;
slave->sdata.cfg_hi = (DWC_CFGH_SRC_PER(0)
| DWC_CFGH_DST_PER(1));
slave->sdata.cfg_lo &= ~(DWC_CFGL_HS_DST_POL
@@ -2048,27 +2047,19 @@ at32_add_device_ac97c(unsigned int id, struct ac97c_platform_data *data,
/* Check if DMA slave interface for capture should be configured. */
if (flags & AC97C_CAPTURE) {
rx_dws->dma_dev = &dw_dmac0_device.dev;
- rx_dws->reg_width = DW_DMA_SLAVE_WIDTH_16BIT;
rx_dws->cfg_hi = DWC_CFGH_SRC_PER(3);
rx_dws->cfg_lo &= ~(DWC_CFGL_HS_DST_POL | DWC_CFGL_HS_SRC_POL);
rx_dws->src_master = 0;
rx_dws->dst_master = 1;
- rx_dws->src_msize = DW_DMA_MSIZE_1;
- rx_dws->dst_msize = DW_DMA_MSIZE_1;
- rx_dws->fc = DW_DMA_FC_D_P2M;
}
/* Check if DMA slave interface for playback should be configured. */
if (flags & AC97C_PLAYBACK) {
tx_dws->dma_dev = &dw_dmac0_device.dev;
- tx_dws->reg_width = DW_DMA_SLAVE_WIDTH_16BIT;
tx_dws->cfg_hi = DWC_CFGH_DST_PER(4);
tx_dws->cfg_lo &= ~(DWC_CFGL_HS_DST_POL | DWC_CFGL_HS_SRC_POL);
tx_dws->src_master = 0;
tx_dws->dst_master = 1;
- tx_dws->src_msize = DW_DMA_MSIZE_1;
- tx_dws->dst_msize = DW_DMA_MSIZE_1;
- tx_dws->fc = DW_DMA_FC_D_M2P;
}
if (platform_device_add_data(pdev, data,
@@ -2138,14 +2129,10 @@ at32_add_device_abdac(unsigned int id, struct atmel_abdac_pdata *data)
dws = &data->dws;
dws->dma_dev = &dw_dmac0_device.dev;
- dws->reg_width = DW_DMA_SLAVE_WIDTH_32BIT;
dws->cfg_hi = DWC_CFGH_DST_PER(2);
dws->cfg_lo &= ~(DWC_CFGL_HS_DST_POL | DWC_CFGL_HS_SRC_POL);
dws->src_master = 0;
dws->dst_master = 1;
- dws->src_msize = DW_DMA_MSIZE_1;
- dws->dst_msize = DW_DMA_MSIZE_1;
- dws->fc = DW_DMA_FC_D_M2P;
if (platform_device_add_data(pdev, data,
sizeof(struct atmel_abdac_pdata)))
diff --git a/arch/avr32/mach-at32ap/include/mach/atmel-mci.h b/arch/avr32/mach-at32ap/include/mach/atmel-mci.h
index a9b38967f703..4bba58561d5c 100644
--- a/arch/avr32/mach-at32ap/include/mach/atmel-mci.h
+++ b/arch/avr32/mach-at32ap/include/mach/atmel-mci.h
@@ -14,11 +14,4 @@ struct mci_dma_data {
#define slave_data_ptr(s) (&(s)->sdata)
#define find_slave_dev(s) ((s)->sdata.dma_dev)
-#define setup_dma_addr(s, t, r) do { \
- if (s) { \
- (s)->sdata.tx_reg = (t); \
- (s)->sdata.rx_reg = (r); \
- } \
-} while (0)
-
#endif /* __MACH_ATMEL_MCI_H */
diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c
index fcfe1eb5acc8..3ba865ddebc4 100644
--- a/drivers/mmc/host/atmel-mci.c
+++ b/drivers/mmc/host/atmel-mci.c
@@ -24,6 +24,7 @@
#include <linux/seq_file.h>
#include <linux/slab.h>
#include <linux/stat.h>
+#include <linux/types.h>
#include <linux/mmc/host.h>
#include <linux/mmc/sdio.h>
@@ -173,6 +174,7 @@ struct atmel_mci {
struct atmel_mci_dma dma;
struct dma_chan *data_chan;
+ struct dma_slave_config dma_conf;
u32 cmd_status;
u32 data_status;
@@ -863,15 +865,16 @@ atmci_prepare_data_dma(struct atmel_mci *host, struct mmc_data *data)
if (data->flags & MMC_DATA_READ) {
direction = DMA_FROM_DEVICE;
- slave_dirn = DMA_DEV_TO_MEM;
+ host->dma_conf.direction = slave_dirn = DMA_DEV_TO_MEM;
} else {
direction = DMA_TO_DEVICE;
- slave_dirn = DMA_MEM_TO_DEV;
+ host->dma_conf.direction = slave_dirn = DMA_MEM_TO_DEV;
}
sglen = dma_map_sg(chan->device->dev, data->sg,
data->sg_len, direction);
+ dmaengine_slave_config(chan, &host->dma_conf);
desc = chan->device->device_prep_slave_sg(chan,
data->sg, sglen, slave_dirn,
DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
@@ -1957,22 +1960,27 @@ static void atmci_configure_dma(struct atmel_mci *host)
if (pdata && find_slave_dev(pdata->dma_slave)) {
dma_cap_mask_t mask;
- setup_dma_addr(pdata->dma_slave,
- host->mapbase + ATMCI_TDR,
- host->mapbase + ATMCI_RDR);
-
/* Try to grab a DMA channel */
dma_cap_zero(mask);
dma_cap_set(DMA_SLAVE, mask);
host->dma.chan =
dma_request_channel(mask, atmci_filter, pdata->dma_slave);
}
- if (!host->dma.chan)
+ if (!host->dma.chan) {
dev_notice(&host->pdev->dev, "DMA not available, using PIO\n");
- else
+ } else {
dev_info(&host->pdev->dev,
"Using %s for DMA transfers\n",
dma_chan_name(host->dma.chan));
+
+ host->dma_conf.src_addr = host->mapbase + ATMCI_RDR;
+ host->dma_conf.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
+ host->dma_conf.src_maxburst = 1;
+ host->dma_conf.dst_addr = host->mapbase + ATMCI_TDR;
+ host->dma_conf.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
+ host->dma_conf.dst_maxburst = 1;
+ host->dma_conf.device_fc = false;
+ }
}
static inline unsigned int atmci_get_version(struct atmel_mci *host)
diff --git a/sound/atmel/abdac.c b/sound/atmel/abdac.c
index 4fa1dbd8ee83..f7c2bb08055d 100644
--- a/sound/atmel/abdac.c
+++ b/sound/atmel/abdac.c
@@ -16,6 +16,7 @@
#include <linux/interrupt.h>
#include <linux/module.h>
#include <linux/platform_device.h>
+#include <linux/types.h>
#include <linux/io.h>
#include <sound/core.h>
@@ -467,15 +468,24 @@ static int __devinit atmel_abdac_probe(struct platform_device *pdev)
snd_card_set_dev(card, &pdev->dev);
if (pdata->dws.dma_dev) {
- struct dw_dma_slave *dws = &pdata->dws;
dma_cap_mask_t mask;
- dws->tx_reg = regs->start + DAC_DATA;
-
dma_cap_zero(mask);
dma_cap_set(DMA_SLAVE, mask);
- dac->dma.chan = dma_request_channel(mask, filter, dws);
+ dac->dma.chan = dma_request_channel(mask, filter, &pdata->dws);
+ if (dac->dma.chan) {
+ struct dma_slave_config dma_conf = {
+ .dst_addr = regs->start + DAC_DATA,
+ .dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES,
+ .src_maxburst = 1,
+ .dst_maxburst = 1,
+ .direction = DMA_MEM_TO_DEV,
+ .device_fc = false,
+ };
+
+ dmaengine_slave_config(dac->dma.chan, &dma_conf);
+ }
}
if (!pdata->dws.dma_dev || !dac->dma.chan) {
dev_dbg(&pdev->dev, "DMA not available\n");
diff --git a/sound/atmel/ac97c.c b/sound/atmel/ac97c.c
index 61dade698358..115313ef54d6 100644
--- a/sound/atmel/ac97c.c
+++ b/sound/atmel/ac97c.c
@@ -20,6 +20,7 @@
#include <linux/platform_device.h>
#include <linux/mutex.h>
#include <linux/gpio.h>
+#include <linux/types.h>
#include <linux/io.h>
#include <sound/core.h>
@@ -1014,16 +1015,28 @@ static int __devinit atmel_ac97c_probe(struct platform_device *pdev)
if (cpu_is_at32ap7000()) {
if (pdata->rx_dws.dma_dev) {
- struct dw_dma_slave *dws = &pdata->rx_dws;
dma_cap_mask_t mask;
- dws->rx_reg = regs->start + AC97C_CARHR + 2;
-
dma_cap_zero(mask);
dma_cap_set(DMA_SLAVE, mask);
chip->dma.rx_chan = dma_request_channel(mask, filter,
- dws);
+ &pdata->rx_dws);
+ if (chip->dma.rx_chan) {
+ struct dma_slave_config dma_conf = {
+ .src_addr = regs->start + AC97C_CARHR +
+ 2,
+ .src_addr_width =
+ DMA_SLAVE_BUSWIDTH_2_BYTES,
+ .src_maxburst = 1,
+ .dst_maxburst = 1,
+ .direction = DMA_DEV_TO_MEM,
+ .device_fc = false,
+ };
+
+ dmaengine_slave_config(chip->dma.rx_chan,
+ &dma_conf);
+ }
dev_info(&chip->pdev->dev, "using %s for DMA RX\n",
dev_name(&chip->dma.rx_chan->dev->device));
@@ -1031,16 +1044,28 @@ static int __devinit atmel_ac97c_probe(struct platform_device *pdev)
}
if (pdata->tx_dws.dma_dev) {
- struct dw_dma_slave *dws = &pdata->tx_dws;
dma_cap_mask_t mask;
- dws->tx_reg = regs->start + AC97C_CATHR + 2;
-
dma_cap_zero(mask);
dma_cap_set(DMA_SLAVE, mask);
chip->dma.tx_chan = dma_request_channel(mask, filter,
- dws);
+ &pdata->tx_dws);
+ if (chip->dma.tx_chan) {
+ struct dma_slave_config dma_conf = {
+ .dst_addr = regs->start + AC97C_CATHR +
+ 2,
+ .dst_addr_width =
+ DMA_SLAVE_BUSWIDTH_2_BYTES,
+ .src_maxburst = 1,
+ .dst_maxburst = 1,
+ .direction = DMA_MEM_TO_DEV,
+ .device_fc = false,
+ };
+
+ dmaengine_slave_config(chip->dma.tx_chan,
+ &dma_conf);
+ }
dev_info(&chip->pdev->dev, "using %s for DMA TX\n",
dev_name(&chip->dma.tx_chan->dev->device));