diff options
author | Ralf Baechle <ralf@linux-mips.org> | 2012-12-18 11:41:14 +0100 |
---|---|---|
committer | Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 2013-01-15 21:54:41 -0800 |
commit | a205a56dc24811a2879572e52c902a38425a4473 (patch) | |
tree | 6f44aa3b57cf9d33db30cc1f8f18c570d32c79bf | |
parent | 6d8df4b6a3a46b62b1a6f6e8678ebd3acc6df8c8 (diff) | |
download | linux-a205a56dc24811a2879572e52c902a38425a4473.tar.bz2 |
serial: Remove RM9000 series serial driver.
Now that support for RM9000 and platforms based on it has been removed,
remove the serial driver for it as well. It's really only been a quirk
for an almost 8250 compatible UART anyway.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
drivers/tty/serial/8250/8250.c | 70 +----------------------------------------
drivers/tty/serial/8250/Kconfig | 9 ------
include/linux/serial_core.h | 1 -
3 files changed, 1 insertion(+), 79 deletions(-)
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-rw-r--r-- | drivers/tty/serial/8250/8250.c | 70 | ||||
-rw-r--r-- | drivers/tty/serial/8250/Kconfig | 9 | ||||
-rw-r--r-- | include/linux/serial_core.h | 1 |
3 files changed, 1 insertions, 79 deletions
diff --git a/drivers/tty/serial/8250/8250.c b/drivers/tty/serial/8250/8250.c index d085e3a8ec06..5fb6577b94dc 100644 --- a/drivers/tty/serial/8250/8250.c +++ b/drivers/tty/serial/8250/8250.c @@ -239,13 +239,6 @@ static const struct serial8250_config uart_config[] = { .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10, .flags = UART_CAP_FIFO | UART_CAP_UUE | UART_CAP_RTOIE, }, - [PORT_RM9000] = { - .name = "RM9000", - .fifo_size = 16, - .tx_loadsz = 16, - .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10, - .flags = UART_CAP_FIFO, - }, [PORT_OCTEON] = { .name = "OCTEON", .fifo_size = 64, @@ -364,56 +357,6 @@ static void au_serial_dl_write(struct uart_8250_port *up, int value) #endif -#ifdef CONFIG_SERIAL_8250_RM9K - -static const u8 - regmap_in[8] = { - [UART_RX] = 0x00, - [UART_IER] = 0x0c, - [UART_IIR] = 0x14, - [UART_LCR] = 0x1c, - [UART_MCR] = 0x20, - [UART_LSR] = 0x24, - [UART_MSR] = 0x28, - [UART_SCR] = 0x2c - }, - regmap_out[8] = { - [UART_TX] = 0x04, - [UART_IER] = 0x0c, - [UART_FCR] = 0x18, - [UART_LCR] = 0x1c, - [UART_MCR] = 0x20, - [UART_LSR] = 0x24, - [UART_MSR] = 0x28, - [UART_SCR] = 0x2c - }; - -static unsigned int rm9k_serial_in(struct uart_port *p, int offset) -{ - offset = regmap_in[offset] << p->regshift; - return readl(p->membase + offset); -} - -static void rm9k_serial_out(struct uart_port *p, int offset, int value) -{ - offset = regmap_out[offset] << p->regshift; - writel(value, p->membase + offset); -} - -static int rm9k_serial_dl_read(struct uart_8250_port *up) -{ - return ((__raw_readl(up->port.membase + 0x10) << 8) | - (__raw_readl(up->port.membase + 0x08) & 0xff)) & 0xffff; -} - -static void rm9k_serial_dl_write(struct uart_8250_port *up, int value) -{ - __raw_writel(value, up->port.membase + 0x08); - __raw_writel(value >> 8, up->port.membase + 0x10); -} - -#endif - static unsigned int hub6_serial_in(struct uart_port *p, int offset) { offset = offset << p->regshift; @@ -491,15 +434,6 @@ static void set_io_from_upio(struct uart_port *p) p->serial_out = mem32_serial_out; break; -#ifdef CONFIG_SERIAL_8250_RM9K - case UPIO_RM9000: - p->serial_in = rm9k_serial_in; - p->serial_out = rm9k_serial_out; - up->dl_read = rm9k_serial_dl_read; - up->dl_write = rm9k_serial_dl_write; - break; -#endif - #ifdef CONFIG_MIPS_ALCHEMY case UPIO_AU: p->serial_in = au_serial_in; @@ -1343,9 +1277,7 @@ static void serial8250_start_tx(struct uart_port *port) unsigned char lsr; lsr = serial_in(up, UART_LSR); up->lsr_saved_flags |= lsr & LSR_SAVE_FLAGS; - if ((port->type == PORT_RM9000) ? - (lsr & UART_LSR_THRE) : - (lsr & UART_LSR_TEMT)) + if (lsr & UART_LSR_TEMT) serial8250_tx_chars(up); } } diff --git a/drivers/tty/serial/8250/Kconfig b/drivers/tty/serial/8250/Kconfig index c31133a6ea8e..d79208f47237 100644 --- a/drivers/tty/serial/8250/Kconfig +++ b/drivers/tty/serial/8250/Kconfig @@ -249,15 +249,6 @@ config SERIAL_8250_ACORN system, say Y to this option. The driver can handle 1, 2, or 3 port cards. If unsure, say N. -config SERIAL_8250_RM9K - bool "Support for MIPS RM9xxx integrated serial port" - depends on SERIAL_8250 != n && SERIAL_RM9000 - select SERIAL_8250_SHARE_IRQ - help - Selecting this option will add support for the integrated serial - port hardware found on MIPS RM9122 and similar processors. - If unsure, say N. - config SERIAL_8250_FSL bool depends on SERIAL_8250_CONSOLE && PPC_UDBG_16550 diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h index a116daa13113..ec5df74c4506 100644 --- a/include/linux/serial_core.h +++ b/include/linux/serial_core.h @@ -136,7 +136,6 @@ struct uart_port { #define UPIO_MEM32 (3) #define UPIO_AU (4) /* Au1x00 type IO */ #define UPIO_TSI (5) /* Tsi108/109 type IO */ -#define UPIO_RM9000 (6) /* RM9000 type IO */ unsigned int read_status_mask; /* driver specific */ unsigned int ignore_status_mask; /* driver specific */ |