diff options
author | Sergei Shtylyov <sshtylyov@ru.mvista.com> | 2009-11-27 22:29:02 +0400 |
---|---|---|
committer | Jeff Garzik <jgarzik@redhat.com> | 2009-12-03 14:36:16 -0500 |
commit | 5600c70e576199a7552e1c0fff43f3fe16f5566e (patch) | |
tree | 811a21c65c52b1b166cc518b5200fab1d9991d73 | |
parent | 8e182a90f91456335756d2ce304ad470795d98e1 (diff) | |
download | linux-5600c70e576199a7552e1c0fff43f3fe16f5566e.tar.bz2 |
pata_hpt{37x|3x2n}: fix timing register masks (take 2)
These drivers inherited from the older 'hpt366' IDE driver the buggy timing
register masks in their set_piomode() metods. As a result, too low command
cycle active time is programmed for slow PIO modes. Quite fortunately, it's
later "fixed up" by the set_dmamode() methods which also "helpfully" reprogram
the command timings, usually to PIO mode 4; unfortunately, setting an UltraDMA
mode #N also reprograms already set PIO data timings, usually to MWDMA mode #
max(N, 2) timings...
However, the drivers added some breakage of their own too: the bit that they
set/clear to control the FIFO is sometimes wrong -- it's actually the MSB of
the command cycle setup time; also, setting it in DMA mode is wrong as this
bit is only for PIO actually and clearing it for PIO modes is not needed as
no mode in any timing table has it set...
Fix all this, inverting the masks while at it, like in the 'hpt366' and
'pata_hpt366' drivers; bump the drivers' versions, accounting for recent
patches that forgot to do it...
Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: stable@kernel.org
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
-rw-r--r-- | drivers/ata/pata_hpt37x.c | 32 | ||||
-rw-r--r-- | drivers/ata/pata_hpt3x2n.c | 17 |
2 files changed, 23 insertions, 26 deletions
diff --git a/drivers/ata/pata_hpt37x.c b/drivers/ata/pata_hpt37x.c index 9f5189c700bb..defd9b8456ed 100644 --- a/drivers/ata/pata_hpt37x.c +++ b/drivers/ata/pata_hpt37x.c @@ -24,7 +24,7 @@ #include <linux/libata.h> #define DRV_NAME "pata_hpt37x" -#define DRV_VERSION "0.6.12" +#define DRV_VERSION "0.6.14" struct hpt_clock { u8 xfer_speed; @@ -411,9 +411,8 @@ static void hpt370_set_piomode(struct ata_port *ap, struct ata_device *adev) pci_read_config_dword(pdev, addr1, ®); mode = hpt37x_find_mode(ap, adev->pio_mode); - mode &= ~0x8000000; /* No FIFO in PIO */ - mode &= ~0x30070000; /* Leave config bits alone */ - reg &= 0x30070000; /* Strip timing bits */ + mode &= 0xCFC3FFFF; /* Leave DMA bits alone */ + reg &= ~0xCFC3FFFF; /* Strip timing bits */ pci_write_config_dword(pdev, addr1, reg | mode); } @@ -430,8 +429,7 @@ static void hpt370_set_dmamode(struct ata_port *ap, struct ata_device *adev) { struct pci_dev *pdev = to_pci_dev(ap->host->dev); u32 addr1, addr2; - u32 reg; - u32 mode; + u32 reg, mode, mask; u8 fast; addr1 = 0x40 + 4 * (adev->devno + 2 * ap->port_no); @@ -443,11 +441,12 @@ static void hpt370_set_dmamode(struct ata_port *ap, struct ata_device *adev) fast |= 0x01; pci_write_config_byte(pdev, addr2, fast); + mask = adev->dma_mode < XFER_UDMA_0 ? 0x31C001FF : 0x303C0000; + pci_read_config_dword(pdev, addr1, ®); mode = hpt37x_find_mode(ap, adev->dma_mode); - mode |= 0x8000000; /* FIFO in MWDMA or UDMA */ - mode &= ~0xC0000000; /* Leave config bits alone */ - reg &= 0xC0000000; /* Strip timing bits */ + mode &= mask; + reg &= ~mask; pci_write_config_dword(pdev, addr1, reg | mode); } @@ -515,9 +514,8 @@ static void hpt372_set_piomode(struct ata_port *ap, struct ata_device *adev) mode = hpt37x_find_mode(ap, adev->pio_mode); printk("Find mode for %d reports %X\n", adev->pio_mode, mode); - mode &= ~0x80000000; /* No FIFO in PIO */ - mode &= ~0x30070000; /* Leave config bits alone */ - reg &= 0x30070000; /* Strip timing bits */ + mode &= 0xCFC3FFFF; /* Leave DMA bits alone */ + reg &= ~0xCFC3FFFF; /* Strip timing bits */ pci_write_config_dword(pdev, addr1, reg | mode); } @@ -534,8 +532,7 @@ static void hpt372_set_dmamode(struct ata_port *ap, struct ata_device *adev) { struct pci_dev *pdev = to_pci_dev(ap->host->dev); u32 addr1, addr2; - u32 reg; - u32 mode; + u32 reg, mode, mask; u8 fast; addr1 = 0x40 + 4 * (adev->devno + 2 * ap->port_no); @@ -546,12 +543,13 @@ static void hpt372_set_dmamode(struct ata_port *ap, struct ata_device *adev) fast &= ~0x07; pci_write_config_byte(pdev, addr2, fast); + mask = adev->dma_mode < XFER_UDMA_0 ? 0x31C001FF : 0x303C0000; + pci_read_config_dword(pdev, addr1, ®); mode = hpt37x_find_mode(ap, adev->dma_mode); printk("Find mode for DMA %d reports %X\n", adev->dma_mode, mode); - mode &= ~0xC0000000; /* Leave config bits alone */ - mode |= 0x80000000; /* FIFO in MWDMA or UDMA */ - reg &= 0xC0000000; /* Strip timing bits */ + mode &= mask; + reg &= ~mask; pci_write_config_dword(pdev, addr1, reg | mode); } diff --git a/drivers/ata/pata_hpt3x2n.c b/drivers/ata/pata_hpt3x2n.c index 8d63eba782ff..26f50af0ad89 100644 --- a/drivers/ata/pata_hpt3x2n.c +++ b/drivers/ata/pata_hpt3x2n.c @@ -25,7 +25,7 @@ #include <linux/libata.h> #define DRV_NAME "pata_hpt3x2n" -#define DRV_VERSION "0.3.4" +#define DRV_VERSION "0.3.7" enum { HPT_PCI_FAST = (1 << 31), @@ -188,9 +188,8 @@ static void hpt3x2n_set_piomode(struct ata_port *ap, struct ata_device *adev) pci_read_config_dword(pdev, addr1, ®); mode = hpt3x2n_find_mode(ap, adev->pio_mode); - mode &= ~0x8000000; /* No FIFO in PIO */ - mode &= ~0x30070000; /* Leave config bits alone */ - reg &= 0x30070000; /* Strip timing bits */ + mode &= 0xCFC3FFFF; /* Leave DMA bits alone */ + reg &= ~0xCFC3FFFF; /* Strip timing bits */ pci_write_config_dword(pdev, addr1, reg | mode); } @@ -207,8 +206,7 @@ static void hpt3x2n_set_dmamode(struct ata_port *ap, struct ata_device *adev) { struct pci_dev *pdev = to_pci_dev(ap->host->dev); u32 addr1, addr2; - u32 reg; - u32 mode; + u32 reg, mode, mask; u8 fast; addr1 = 0x40 + 4 * (adev->devno + 2 * ap->port_no); @@ -219,11 +217,12 @@ static void hpt3x2n_set_dmamode(struct ata_port *ap, struct ata_device *adev) fast &= ~0x07; pci_write_config_byte(pdev, addr2, fast); + mask = adev->dma_mode < XFER_UDMA_0 ? 0x31C001FF : 0x303C0000; + pci_read_config_dword(pdev, addr1, ®); mode = hpt3x2n_find_mode(ap, adev->dma_mode); - mode |= 0x8000000; /* FIFO in MWDMA or UDMA */ - mode &= ~0xC0000000; /* Leave config bits alone */ - reg &= 0xC0000000; /* Strip timing bits */ + mode &= mask; + reg &= ~mask; pci_write_config_dword(pdev, addr1, reg | mode); } |