diff options
author | John Crispin <blogic@openwrt.org> | 2012-08-28 12:44:59 +0200 |
---|---|---|
committer | John Crispin <blogic@openwrt.org> | 2012-09-13 10:30:49 +0200 |
commit | 3f8c50c9b110dad4136ea7226cd87b0c4cdb70c8 (patch) | |
tree | bd2dc11535f5102ca56edc10e4674d1e13908f20 | |
parent | 30404aec4d093942ba67ded8e1926cbf4472d4f7 (diff) | |
download | linux-3f8c50c9b110dad4136ea7226cd87b0c4cdb70c8.tar.bz2 |
OF: pinctrl: MIPS: lantiq: implement lantiq/xway pinctrl support
Implement support for pinctrl on lantiq/xway socs. The IO core found on these
socs has the registers for pinctrl, pinconf and gpio mixed up in the same
register range. As the gpio_chip handling is only a few lines, the driver also
implements the gpio functionality. This obseletes the old gpio driver that was
located in the arch/ folder.
Signed-off-by: John Crispin <blogic@openwrt.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Cc: devicetree-discuss@lists.ozlabs.org
Cc: linux-kernel@vger.kernel.org
-rw-r--r-- | arch/mips/Kconfig | 2 | ||||
-rw-r--r-- | arch/mips/lantiq/Kconfig | 1 | ||||
-rw-r--r-- | arch/mips/lantiq/xway/Makefile | 2 | ||||
-rw-r--r-- | arch/mips/lantiq/xway/gpio.c | 183 | ||||
-rw-r--r-- | drivers/pinctrl/Kconfig | 11 | ||||
-rw-r--r-- | drivers/pinctrl/Makefile | 2 | ||||
-rw-r--r-- | drivers/pinctrl/pinctrl-lantiq.c | 342 | ||||
-rw-r--r-- | drivers/pinctrl/pinctrl-lantiq.h | 194 | ||||
-rw-r--r-- | drivers/pinctrl/pinctrl-xway.c | 781 |
9 files changed, 1334 insertions, 184 deletions
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index 331d574df99c..b0f74b89d6fa 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -241,6 +241,8 @@ config LANTIQ select HAVE_MACH_CLKDEV select CLKDEV_LOOKUP select USE_OF + select PINCTRL + select PINCTRL_LANTIQ config LASAT bool "LASAT Networks platforms" diff --git a/arch/mips/lantiq/Kconfig b/arch/mips/lantiq/Kconfig index 20bdf40b3efa..080c01349f9f 100644 --- a/arch/mips/lantiq/Kconfig +++ b/arch/mips/lantiq/Kconfig @@ -2,6 +2,7 @@ if LANTIQ config SOC_TYPE_XWAY bool + select PINCTRL_XWAY default n choice diff --git a/arch/mips/lantiq/xway/Makefile b/arch/mips/lantiq/xway/Makefile index f7053b89ad11..70a58c747bd0 100644 --- a/arch/mips/lantiq/xway/Makefile +++ b/arch/mips/lantiq/xway/Makefile @@ -1 +1 @@ -obj-y := prom.o sysctrl.o clk.o reset.o gpio.o dma.o gptu.o +obj-y := prom.o sysctrl.o clk.o reset.o dma.o gptu.o diff --git a/arch/mips/lantiq/xway/gpio.c b/arch/mips/lantiq/xway/gpio.c deleted file mode 100644 index 2ab39e93d9be..000000000000 --- a/arch/mips/lantiq/xway/gpio.c +++ /dev/null @@ -1,183 +0,0 @@ -/* - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - * - * Copyright (C) 2010 John Crispin <blogic@openwrt.org> - */ - -#include <linux/slab.h> -#include <linux/export.h> -#include <linux/platform_device.h> -#include <linux/gpio.h> -#include <linux/ioport.h> -#include <linux/io.h> - -#include <lantiq_soc.h> - -#define LTQ_GPIO_OUT 0x00 -#define LTQ_GPIO_IN 0x04 -#define LTQ_GPIO_DIR 0x08 -#define LTQ_GPIO_ALTSEL0 0x0C -#define LTQ_GPIO_ALTSEL1 0x10 -#define LTQ_GPIO_OD 0x14 - -#define PINS_PER_PORT 16 -#define MAX_PORTS 3 - -#define ltq_gpio_getbit(m, r, p) (!!(ltq_r32(m + r) & (1 << p))) -#define ltq_gpio_setbit(m, r, p) ltq_w32_mask(0, (1 << p), m + r) -#define ltq_gpio_clearbit(m, r, p) ltq_w32_mask((1 << p), 0, m + r) - -struct ltq_gpio { - void __iomem *membase; - struct gpio_chip chip; -}; - -static struct ltq_gpio ltq_gpio_port[MAX_PORTS]; - -int ltq_gpio_request(unsigned int pin, unsigned int alt0, - unsigned int alt1, unsigned int dir, const char *name) -{ - int id = 0; - - if (pin >= (MAX_PORTS * PINS_PER_PORT)) - return -EINVAL; - if (gpio_request(pin, name)) { - pr_err("failed to setup lantiq gpio: %s\n", name); - return -EBUSY; - } - if (dir) - gpio_direction_output(pin, 1); - else - gpio_direction_input(pin); - while (pin >= PINS_PER_PORT) { - pin -= PINS_PER_PORT; - id++; - } - if (alt0) - ltq_gpio_setbit(ltq_gpio_port[id].membase, - LTQ_GPIO_ALTSEL0, pin); - else - ltq_gpio_clearbit(ltq_gpio_port[id].membase, - LTQ_GPIO_ALTSEL0, pin); - if (alt1) - ltq_gpio_setbit(ltq_gpio_port[id].membase, - LTQ_GPIO_ALTSEL1, pin); - else - ltq_gpio_clearbit(ltq_gpio_port[id].membase, - LTQ_GPIO_ALTSEL1, pin); - return 0; -} -EXPORT_SYMBOL(ltq_gpio_request); - -static void ltq_gpio_set(struct gpio_chip *chip, unsigned int offset, int value) -{ - struct ltq_gpio *ltq_gpio = container_of(chip, struct ltq_gpio, chip); - - if (value) - ltq_gpio_setbit(ltq_gpio->membase, LTQ_GPIO_OUT, offset); - else - ltq_gpio_clearbit(ltq_gpio->membase, LTQ_GPIO_OUT, offset); -} - -static int ltq_gpio_get(struct gpio_chip *chip, unsigned int offset) -{ - struct ltq_gpio *ltq_gpio = container_of(chip, struct ltq_gpio, chip); - - return ltq_gpio_getbit(ltq_gpio->membase, LTQ_GPIO_IN, offset); -} - -static int ltq_gpio_direction_input(struct gpio_chip *chip, unsigned int offset) -{ - struct ltq_gpio *ltq_gpio = container_of(chip, struct ltq_gpio, chip); - - ltq_gpio_clearbit(ltq_gpio->membase, LTQ_GPIO_OD, offset); - ltq_gpio_clearbit(ltq_gpio->membase, LTQ_GPIO_DIR, offset); - - return 0; -} - -static int ltq_gpio_direction_output(struct gpio_chip *chip, - unsigned int offset, int value) -{ - struct ltq_gpio *ltq_gpio = container_of(chip, struct ltq_gpio, chip); - - ltq_gpio_setbit(ltq_gpio->membase, LTQ_GPIO_OD, offset); - ltq_gpio_setbit(ltq_gpio->membase, LTQ_GPIO_DIR, offset); - ltq_gpio_set(chip, offset, value); - - return 0; -} - -static int ltq_gpio_req(struct gpio_chip *chip, unsigned offset) -{ - struct ltq_gpio *ltq_gpio = container_of(chip, struct ltq_gpio, chip); - - ltq_gpio_clearbit(ltq_gpio->membase, LTQ_GPIO_ALTSEL0, offset); - ltq_gpio_clearbit(ltq_gpio->membase, LTQ_GPIO_ALTSEL1, offset); - return 0; -} - -static int ltq_gpio_probe(struct platform_device *pdev) -{ - struct resource *res; - - if (pdev->id >= MAX_PORTS) { - dev_err(&pdev->dev, "invalid gpio port %d\n", - pdev->id); - return -EINVAL; - } - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) { - dev_err(&pdev->dev, "failed to get memory for gpio port %d\n", - pdev->id); - return -ENOENT; - } - res = devm_request_mem_region(&pdev->dev, res->start, - resource_size(res), dev_name(&pdev->dev)); - if (!res) { - dev_err(&pdev->dev, - "failed to request memory for gpio port %d\n", - pdev->id); - return -EBUSY; - } - ltq_gpio_port[pdev->id].membase = devm_ioremap_nocache(&pdev->dev, - res->start, resource_size(res)); - if (!ltq_gpio_port[pdev->id].membase) { - dev_err(&pdev->dev, "failed to remap memory for gpio port %d\n", - pdev->id); - return -ENOMEM; - } - ltq_gpio_port[pdev->id].chip.label = "ltq_gpio"; - ltq_gpio_port[pdev->id].chip.direction_input = ltq_gpio_direction_input; - ltq_gpio_port[pdev->id].chip.direction_output = - ltq_gpio_direction_output; - ltq_gpio_port[pdev->id].chip.get = ltq_gpio_get; - ltq_gpio_port[pdev->id].chip.set = ltq_gpio_set; - ltq_gpio_port[pdev->id].chip.request = ltq_gpio_req; - ltq_gpio_port[pdev->id].chip.base = PINS_PER_PORT * pdev->id; - ltq_gpio_port[pdev->id].chip.ngpio = PINS_PER_PORT; - platform_set_drvdata(pdev, <q_gpio_port[pdev->id]); - return gpiochip_add(<q_gpio_port[pdev->id].chip); -} - -static struct platform_driver -ltq_gpio_driver = { - .probe = ltq_gpio_probe, - .driver = { - .name = "ltq_gpio", - .owner = THIS_MODULE, - }, -}; - -int __init ltq_gpio_init(void) -{ - int ret = platform_driver_register(<q_gpio_driver); - - if (ret) - pr_info("ltq_gpio : Error registering platform driver!"); - return ret; -} - -postcore_initcall(ltq_gpio_init); diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig index 54e3588bef62..f77dce0b1011 100644 --- a/drivers/pinctrl/Kconfig +++ b/drivers/pinctrl/Kconfig @@ -55,6 +55,12 @@ config PINCTRL_IMX6Q help Say Y here to enable the imx6q pinctrl driver +config PINCTRL_LANTIQ + bool + depends on LANTIQ + select PINMUX + select PINCONF + config PINCTRL_PXA3xx bool select PINMUX @@ -147,6 +153,11 @@ config PINCTRL_COH901 source "drivers/pinctrl/spear/Kconfig" +config PINCTRL_XWAY + bool + depends on SOC_TYPE_XWAY + depends on PINCTRL_LANTIQ + endmenu endif diff --git a/drivers/pinctrl/Makefile b/drivers/pinctrl/Makefile index f40b1f81ff2c..e19e2077a795 100644 --- a/drivers/pinctrl/Makefile +++ b/drivers/pinctrl/Makefile @@ -29,5 +29,7 @@ obj-$(CONFIG_PINCTRL_TEGRA20) += pinctrl-tegra20.o obj-$(CONFIG_PINCTRL_TEGRA30) += pinctrl-tegra30.o obj-$(CONFIG_PINCTRL_U300) += pinctrl-u300.o obj-$(CONFIG_PINCTRL_COH901) += pinctrl-coh901.o +obj-$(CONFIG_PINCTRL_XWAY) += pinctrl-xway.o +obj-$(CONFIG_PINCTRL_LANTIQ) += pinctrl-lantiq.o obj-$(CONFIG_PLAT_SPEAR) += spear/ diff --git a/drivers/pinctrl/pinctrl-lantiq.c b/drivers/pinctrl/pinctrl-lantiq.c new file mode 100644 index 000000000000..07ba7682cf22 --- /dev/null +++ b/drivers/pinctrl/pinctrl-lantiq.c @@ -0,0 +1,342 @@ +/* + * linux/drivers/pinctrl/pinctrl-lantiq.c + * based on linux/drivers/pinctrl/pinctrl-pxa3xx.c + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * publishhed by the Free Software Foundation. + * + * Copyright (C) 2012 John Crispin <blogic@openwrt.org> + */ + +#include <linux/module.h> +#include <linux/device.h> +#include <linux/io.h> +#include <linux/platform_device.h> +#include <linux/slab.h> +#include <linux/of.h> + +#include "pinctrl-lantiq.h" + +static int ltq_get_group_count(struct pinctrl_dev *pctrldev) +{ + struct ltq_pinmux_info *info = pinctrl_dev_get_drvdata(pctrldev); + return info->num_grps; +} + +static const char *ltq_get_group_name(struct pinctrl_dev *pctrldev, + unsigned selector) +{ + struct ltq_pinmux_info *info = pinctrl_dev_get_drvdata(pctrldev); + if (selector >= info->num_grps) + return NULL; + return info->grps[selector].name; +} + +static int ltq_get_group_pins(struct pinctrl_dev *pctrldev, + unsigned selector, + const unsigned **pins, + unsigned *num_pins) +{ + struct ltq_pinmux_info *info = pinctrl_dev_get_drvdata(pctrldev); + if (selector >= info->num_grps) + return -EINVAL; + *pins = info->grps[selector].pins; + *num_pins = info->grps[selector].npins; + return 0; +} + +void ltq_pinctrl_dt_free_map(struct pinctrl_dev *pctldev, + struct pinctrl_map *map, unsigned num_maps) +{ + int i; + + for (i = 0; i < num_maps; i++) + if (map[i].type == PIN_MAP_TYPE_CONFIGS_PIN) + kfree(map[i].data.configs.configs); + kfree(map); +} + +static void ltq_pinctrl_pin_dbg_show(struct pinctrl_dev *pctldev, + struct seq_file *s, + unsigned offset) +{ + seq_printf(s, " %s", dev_name(pctldev->dev)); +} + +static int ltq_pinctrl_dt_subnode_to_map(struct pinctrl_dev *pctldev, + struct device_node *np, + struct pinctrl_map **map) +{ + struct ltq_pinmux_info *info = pinctrl_dev_get_drvdata(pctldev); + unsigned long configs[3]; + unsigned num_configs = 0; + struct property *prop; + const char *group, *pin; + const char *function; + int ret, i; + + ret = of_property_read_string(np, "lantiq,function", &function); + if (!ret) { + of_property_for_each_string(np, "lantiq,groups", prop, group) { + (*map)->type = PIN_MAP_TYPE_MUX_GROUP; + (*map)->name = function; + (*map)->data.mux.group = group; + (*map)->data.mux.function = function; + (*map)++; + } + if (of_find_property(np, "lantiq,pins", NULL)) + dev_err(pctldev->dev, + "%s mixes pins and groups settings\n", + np->name); + return 0; + } + + for (i = 0; i < info->num_params; i++) { + u32 val; + int ret = of_property_read_u32(np, + info->params[i].property, &val); + if (!ret) + configs[num_configs++] = + LTQ_PINCONF_PACK(info->params[i].param, + val); + } + + if (!num_configs) + return -EINVAL; + + of_property_for_each_string(np, "lantiq,pins", prop, pin) { + (*map)->data.configs.configs = kmemdup(configs, + num_configs * sizeof(unsigned long), + GFP_KERNEL); + (*map)->type = PIN_MAP_TYPE_CONFIGS_PIN; + (*map)->name = pin; + (*map)->data.configs.group_or_pin = pin; + (*map)->data.configs.num_configs = num_configs; + (*map)++; + } + return 0; +} + +static int ltq_pinctrl_dt_subnode_size(struct device_node *np) +{ + int ret; + + ret = of_property_count_strings(np, "lantiq,groups"); + if (ret < 0) + ret = of_property_count_strings(np, "lantiq,pins"); + return ret; +} + +int ltq_pinctrl_dt_node_to_map(struct pinctrl_dev *pctldev, + struct device_node *np_config, + struct pinctrl_map **map, + unsigned *num_maps) +{ + struct pinctrl_map *tmp; + struct device_node *np; + int ret; + + *num_maps = 0; + for_each_child_of_node(np_config, np) + *num_maps += ltq_pinctrl_dt_subnode_size(np); + *map = kzalloc(*num_maps * sizeof(struct pinctrl_map), GFP_KERNEL); + if (!*map) + return -ENOMEM; + tmp = *map; + + for_each_child_of_node(np_config, np) { + ret = ltq_pinctrl_dt_subnode_to_map(pctldev, np, &tmp); + if (ret < 0) { + ltq_pinctrl_dt_free_map(pctldev, *map, *num_maps); + return ret; + } + } + return 0; +} + +static struct pinctrl_ops ltq_pctrl_ops = { + .get_groups_count = ltq_get_group_count, + .get_group_name = ltq_get_group_name, + .get_group_pins = ltq_get_group_pins, + .pin_dbg_show = ltq_pinctrl_pin_dbg_show, + .dt_node_to_map = ltq_pinctrl_dt_node_to_map, + .dt_free_map = ltq_pinctrl_dt_free_map, +}; + +static int ltq_pmx_func_count(struct pinctrl_dev *pctrldev) +{ + struct ltq_pinmux_info *info = pinctrl_dev_get_drvdata(pctrldev); + + return info->num_funcs; +} + +static const char *ltq_pmx_func_name(struct pinctrl_dev *pctrldev, + unsigned selector) +{ + struct ltq_pinmux_info *info = pinctrl_dev_get_drvdata(pctrldev); + + if (selector >= info->num_funcs) + return NULL; + + return info->funcs[selector].name; +} + +static int ltq_pmx_get_groups(struct pinctrl_dev *pctrldev, + unsigned func, + const char * const **groups, + unsigned * const num_groups) +{ + struct ltq_pinmux_info *info = pinctrl_dev_get_drvdata(pctrldev); + + *groups = info->funcs[func].groups; + *num_groups = info->funcs[func].num_groups; + + return 0; +} + +/* Return function number. If failure, return negative value. */ +static int match_mux(const struct ltq_mfp_pin *mfp, unsigned mux) +{ + int i; + for (i = 0; i < LTQ_MAX_MUX; i++) { + if (mfp->func[i] == mux) + break; + } + if (i >= LTQ_MAX_MUX) + return -EINVAL; + return i; +} + +/* dont assume .mfp is linearly mapped. find the mfp with the correct .pin */ +static int match_mfp(const struct ltq_pinmux_info *info, int pin) +{ + int i; + for (i = 0; i < info->num_mfp; i++) { + if (info->mfp[i].pin == pin) + return i; + } + return -1; +} + +/* check whether current pin configuration is valid. Negative for failure */ +static int match_group_mux(const struct ltq_pin_group *grp, + const struct ltq_pinmux_info *info, + unsigned mux) +{ + int i, pin, ret = 0; + for (i = 0; i < grp->npins; i++) { + pin = match_mfp(info, grp->pins[i]); + if (pin < 0) { + dev_err(info->dev, "could not find mfp for pin %d\n", + grp->pins[i]); + return -EINVAL; + } + ret = match_mux(&info->mfp[pin], mux); + if (ret < 0) { + dev_err(info->dev, "Can't find mux %d on pin%d\n", + mux, pin); + break; + } + } + return ret; +} + +static int ltq_pmx_enable(struct pinctrl_dev *pctrldev, + unsigned func, + unsigned group) +{ + struct ltq_pinmux_info *info = pinctrl_dev_get_drvdata(pctrldev); + const struct ltq_pin_group *pin_grp = &info->grps[group]; + int i, pin, pin_func, ret; + + if (!pin_grp->npins || + (match_group_mux(pin_grp, info, pin_grp->mux) < 0)) { + dev_err(info->dev, "Failed to set the pin group: %s\n", + info->grps[group].name); + return -EINVAL; + } + for (i = 0; i < pin_grp->npins; i++) { + pin = match_mfp(info, pin_grp->pins[i]); + if (pin < 0) { + dev_err(info->dev, "could not find mfp for pin %d\n", + pin_grp->pins[i]); + return -EINVAL; + } + pin_func = match_mux(&info->mfp[pin], pin_grp->mux); + ret = info->apply_mux(pctrldev, pin, pin_func); + if (ret) { + dev_err(info->dev, + "failed to apply mux %d for pin %d\n", + pin_func, pin); + return ret; + } + } + return 0; +} + +static void ltq_pmx_disable(struct pinctrl_dev *pctrldev, + unsigned func, + unsigned group) +{ + /* + * Nothing to do here. However, pinconf_check_ops() requires this + * callback to be defined. + */ +} + +static int ltq_pmx_gpio_request_enable(struct pinctrl_dev *pctrldev, + struct pinctrl_gpio_range *range, + unsigned pin) +{ + struct ltq_pinmux_info *info = pinctrl_dev_get_drvdata(pctrldev); + int mfp = match_mfp(info, pin + (range->id * 32)); + int pin_func; + + if (mfp < 0) { + dev_err(info->dev, "could not find mfp for pin %d\n", pin); + return -EINVAL; + } + + pin_func = match_mux(&info->mfp[mfp], 0); + if (pin_func < 0) { + dev_err(info->dev, "No GPIO function on pin%d\n", mfp); + return -EINVAL; + } + + return info->apply_mux(pctrldev, mfp, pin_func); +} + +static struct pinmux_ops ltq_pmx_ops = { + .get_functions_count = ltq_pmx_func_count, + .get_function_name = ltq_pmx_func_name, + .get_function_groups = ltq_pmx_get_groups, + .enable = ltq_pmx_enable, + .disable = ltq_pmx_disable, + .gpio_request_enable = ltq_pmx_gpio_request_enable, +}; + +/* + * allow different socs to register with the generic part of the lanti + * pinctrl code + */ +int ltq_pinctrl_register(struct platform_device *pdev, + struct ltq_pinmux_info *info) +{ + struct pinctrl_desc *desc; + + if (!info) + return -EINVAL; + desc = info->desc; + desc->pctlops = <q_pctrl_ops; + desc->pmxops = <q_pmx_ops; + info->dev = &pdev->dev; + + info->pctrl = pinctrl_register(desc, &pdev->dev, info); + if (!info->pctrl) { + dev_err(&pdev->dev, "failed to register LTQ pinmux driver\n"); + return -EINVAL; + } + platform_set_drvdata(pdev, info); + return 0; +} diff --git a/drivers/pinctrl/pinctrl-lantiq.h b/drivers/pinctrl/pinctrl-lantiq.h new file mode 100644 index 000000000000..4419d32a0ade --- /dev/null +++ b/drivers/pinctrl/pinctrl-lantiq.h @@ -0,0 +1,194 @@ +/* + * linux/drivers/pinctrl/pinctrl-lantiq.h + * based on linux/drivers/pinctrl/pinctrl-pxa3xx.h + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * publishhed by the Free Software Foundation. + * + * Copyright (C) 2012 John Crispin <blogic@openwrt.org> + */ + +#ifndef __PINCTRL_LANTIQ_H + +#include <linux/clkdev.h> +#include <linux/pinctrl/pinctrl.h> +#include <linux/pinctrl/pinconf.h> +#include <linux/pinctrl/pinmux.h> +#include <linux/pinctrl/consumer.h> +#include <linux/pinctrl/machine.h> + +#include "core.h" + +#define ARRAY_AND_SIZE(x) (x), ARRAY_SIZE(x) + +#define LTQ_MAX_MUX 4 +#define MFPR_FUNC_MASK 0x3 + +#define LTQ_PINCONF_PACK(param, arg) ((param) << 16 | (arg)) +#define LTQ_PINCONF_UNPACK_PARAM(conf) ((conf) >> 16) +#define LTQ_PINCONF_UNPACK_ARG(conf) ((conf) & 0xffff) + +enum ltq_pinconf_param { + LTQ_PINCONF_PARAM_PULL, + LTQ_PINCONF_PARAM_OPEN_DRAIN, + LTQ_PINCONF_PARAM_DRIVE_CURRENT, + LTQ_PINCONF_PARAM_SLEW_RATE, +}; + +struct ltq_cfg_param { + const char *property; + enum ltq_pinconf_param param; +}; + +struct ltq_mfp_pin { + const char *name; + const unsigned int pin; + const unsigned short func[LTQ_MAX_MUX]; +}; + +struct ltq_pin_group { + const char *name; + const unsigned mux; + const unsigned *pins; + const unsigned npins; +}; + +struct ltq_pmx_func { + const char *name; + const char * const *groups; + const unsigned num_groups; +}; + +struct ltq_pinmux_info { + struct device *dev; + struct pinctrl_dev *pctrl; + + /* we need to manage up to 5 pad controllers */ + void __iomem *membase[5]; + + /* the descriptor for the subsystem */ + struct pinctrl_desc *desc; + + /* we expose our pads to the subsystem */ + struct pinctrl_pin_desc *pads; + + /* the number of pads. this varies between socs */ + unsigned int num_pads; + + /* these are our multifunction pins */ + const struct ltq_mfp_pin *mfp; + unsigned int num_mfp; + + /* a number of multifunction pins can be grouped together */ + const struct ltq_pin_group *grps; + unsigned int num_grps; + + /* a mapping between function string and id */ + const struct ltq_pmx_func *funcs; + unsigned int num_funcs; + + /* the pinconf options that we are able to read from the DT */ + const struct ltq_cfg_param *params; + unsigned int num_params; + + /* the pad controller can have a irq mapping */ + const unsigned *exin; + unsigned int num_exin; + + /* we need 5 clocks max */ + struct clk *clk[5]; + + /* soc specific callback used to apply muxing */ + int (*apply_mux)(struct pinctrl_dev *pctrldev, int pin, int mux); +}; + +enum ltq_pin { + GPIO0 = 0, + GPIO1, + GPIO2, + GPIO3, + GPIO4, + GPIO5, + GPIO6, + GPIO7, + GPIO8, + GPIO9, + GPIO10, /* 10 */ + GPIO11, + GPIO12, + GPIO13, + GPIO14, + GPIO15, + GPIO16, + GPIO17, + GPIO18, + GPIO19, + GPIO20, /* 20 */ + GPIO21, + GPIO22, + GPIO23, + GPIO24, + GPIO25, + GPIO26, + GPIO27, + GPIO28, + GPIO29, + GPIO30, /* 30 */ + GPIO31, + GPIO32, + GPIO33, + GPIO34, + GPIO35, + GPIO36, + GPIO37, + GPIO38, + GPIO39, + GPIO40, /* 40 */ + GPIO41, + GPIO42, + GPIO43, + GPIO44, + GPIO45, + GPIO46, + GPIO47, + GPIO48, + GPIO49, + GPIO50, /* 50 */ + GPIO51, + GPIO52, + GPIO53, + GPIO54, + GPIO55, + + GPIO64, + GPIO65, + GPIO66, + GPIO67, + GPIO68, + GPIO69, + GPIO70, + GPIO71, + GPIO72, + GPIO73, + GPIO74, + GPIO75, + GPIO76, + GPIO77, + GPIO78, + GPIO79, + GPIO80, + GPIO81, + GPIO82, + GPIO83, + GPIO84, + GPIO85, + GPIO86, + GPIO87, + GPIO88, +}; + +extern int ltq_pinctrl_register(struct platform_device *pdev, + struct ltq_pinmux_info *info); +extern int ltq_pinctrl_unregister(struct platform_device *pdev); +#endif /* __PINCTRL_PXA3XX_H */ diff --git a/drivers/pinctrl/pinctrl-xway.c b/drivers/pinctrl/pinctrl-xway.c new file mode 100644 index 000000000000..f8d917d40c92 --- /dev/null +++ b/drivers/pinctrl/pinctrl-xway.c @@ -0,0 +1,781 @@ +/* + * linux/drivers/pinctrl/pinmux-xway.c + * based on linux/drivers/pinctrl/pinmux-pxa910.c + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * publishhed by the Free Software Foundation. + * + * Copyright (C) 2012 John Crispin <blogic@openwrt.org> + */ + +#include <linux/slab.h> +#include <linux/module.h> +#include <linux/of_platform.h> +#include <linux/of_address.h> +#include <linux/of_gpio.h> +#include <linux/ioport.h> +#include <linux/io.h> +#include <linux/device.h> +#include <linux/module.h> +#include <linux/io.h> +#include <linux/platform_device.h> + +#include "pinctrl-lantiq.h" + +#include <lantiq_soc.h> + +/* we have 3 1/2 banks of 16 bit each */ +#define PINS 16 +#define PORT3 3 +#define PORT(x) (x / PINS) +#define PORT_PIN(x) (x % PINS) + +/* we have 2 mux bits that can be set for each pin */ +#define MUX_ALT0 0x1 +#define MUX_ALT1 0x2 + +/* + * each bank has this offset apart from the 1/2 bank that is mixed into the + * other 3 ranges + */ +#define REG_OFF 0x30 + +/* these are the offsets to our registers */ +#define GPIO_BASE(p) (REG_OFF * PORT(p)) +#define GPIO_OUT(p) GPIO_BASE(p) +#define GPIO_IN(p) (GPIO_BASE(p) + 0x04) +#define GPIO_DIR(p) (GPIO_BASE(p) + 0x08) +#define GPIO_ALT0(p) (GPIO_BASE(p) + 0x0C) +#define GPIO_ALT1(p) (GPIO_BASE(p) + 0x10) +#define GPIO_OD(p) (GPIO_BASE(p) + 0x14) +#define GPIO_PUDSEL(p) (GPIO_BASE(p) + 0x1c) +#define GPIO_PUDEN(p) (GPIO_BASE(p) + 0x20) + +/* the 1/2 port needs special offsets for some registers */ +#define GPIO3_OD (GPIO_BASE(0) + 0x24) +#define GPIO3_PUDSEL (GPIO_BASE(0) + 0x28) +#define GPIO3_PUDEN (GPIO_BASE(0) + 0x2C) +#define GPIO3_ALT1 (GPIO_BASE(PINS) + 0x24) + +/* macros to help us access the registers */ +#define gpio_getbit(m, r, p) (!!(ltq_r32(m + r) & BIT(p))) +#define gpio_setbit(m, r, p) ltq_w32_mask(0, BIT(p), m + r) +#define gpio_clearbit(m, r, p) ltq_w32_mask(BIT(p), 0, m + r) + +#define MFP_XWAY(a, f0, f1, f2, f3) \ + { \ + .name = #a, \ + .pin = a, \ + .func = { \ + XWAY_MUX_##f0, \ + XWAY_MUX_##f1, \ + XWAY_MUX_##f2, \ + XWAY_MUX_##f3, \ + }, \ + } + +#define GRP_MUX(a, m, p) \ + { .name = a, .mux = XWAY_MUX_##m, .pins = p, .npins = ARRAY_SIZE(p), } + +#define FUNC_MUX(f, m) \ + { .func = f, .mux = XWAY_MUX_##m, } + +#define XWAY_MAX_PIN 32 +#define XR9_MAX_PIN 56 + +enum xway_mux { + XWAY_MUX_GPIO = 0, + XWAY_MUX_SPI, + XWAY_MUX_ASC, + XWAY_MUX_PCI, + XWAY_MUX_CGU, + XWAY_MUX_EBU, + XWAY_MUX_JTAG, + XWAY_MUX_EXIN, + XWAY_MUX_TDM, + XWAY_MUX_STP, + XWAY_MUX_SIN, + XWAY_MUX_GPT, + XWAY_MUX_NMI, + XWAY_MUX_MDIO, + XWAY_MUX_MII, + XWAY_MUX_EPHY, + XWAY_MUX_DFE, + XWAY_MUX_SDIO, + XWAY_MUX_NONE = 0xffff, +}; + +static const struct ltq_mfp_pin xway_mfp[] = { + /* pin f0 f1 f2 f3 */ + MFP_XWAY(GPIO0, GPIO, EXIN, NONE, TDM), + MFP_XWAY(GPIO1, GPIO, EXIN, NONE, NONE), + MFP_XWAY(GPIO2, GPIO, CGU, EXIN, NONE), + MFP_XWAY(GPIO3, GPIO, CGU, NONE, PCI), + MFP_XWAY(GPIO4, GPIO, STP, NONE, ASC), + MFP_XWAY(GPIO5, GPIO, STP, NONE, NONE), + MFP_XWAY(GPIO6, GPIO, STP, GPT, ASC), + MFP_XWAY(GPIO7, GPIO, CGU, PCI, NONE), + MFP_XWAY(GPIO8, GPIO, CGU, NMI, NONE), + MFP_XWAY(GPIO9, GPIO, ASC, SPI, EXIN), + MFP_XWAY(GPIO10, GPIO, ASC, SPI, NONE), + MFP_XWAY(GPIO11, GPIO, ASC, PCI, SPI), + MFP_XWAY(GPIO12, GPIO, ASC, NONE, NONE), + MFP_XWAY(GPIO13, GPIO, EBU, SPI, NONE), + MFP_XWAY(GPIO14, GPIO, CGU, PCI, NONE), + MFP_XWAY(GPIO15, GPIO, SPI, JTAG, NONE), + MFP_XWAY(GPIO16, GPIO, SPI, NONE, JTAG), + MFP_XWAY(GPIO17, GPIO, SPI, NONE, JTAG), + MFP_XWAY(GPIO18, GPIO, SPI, NONE, JTAG), + MFP_XWAY(GPIO19, GPIO, PCI, NONE, NONE), + MFP_XWAY(GPIO20, GPIO, JTAG, NONE, NONE), + MFP_XWAY(GPIO21, GPIO, PCI, EBU, GPT), + MFP_XWAY(GPIO22, GPIO, SPI, NONE, NONE), + MFP_XWAY(GPIO23, GPIO, EBU, PCI, STP), + MFP_XWAY(GPIO24, GPIO, EBU, TDM, PCI), + MFP_XWAY(GPIO25, GPIO, TDM, NONE, ASC), + MFP_XWAY(GPIO26, GPIO, EBU, NONE, TDM), + MFP_XWAY(GPIO27, GPIO, TDM, NONE, ASC), + MFP_XWAY(GPIO28, GPIO, GPT, NONE, NONE), + MFP_XWAY(GPIO29, GPIO, PCI, NONE, NONE), + MFP_XWAY(GPIO30, GPIO, PCI, NONE, NONE), + MFP_XWAY(GPIO31, GPIO, EBU, PCI, NONE), + MFP_XWAY(GPIO32, GPIO, NONE, NONE, EBU), + MFP_XWAY(GPIO33, GPIO, NONE, NONE, EBU), + MFP_XWAY(GPIO34, GPIO, NONE, NONE, EBU), + MFP_XWAY(GPIO35, GPIO, NONE, NONE, EBU), + MFP_XWAY(GPIO36, GPIO, SIN, NONE, EBU), + MFP_XWAY(GPIO37, GPIO, PCI, NONE, NONE), + MFP_XWAY(GPIO38, GPIO, PCI, NONE, NONE), + MFP_XWAY(GPIO39, GPIO, EXIN, NONE, NONE), + MFP_XWAY(GPIO40, GPIO, NONE, NONE, NONE), + MFP_XWAY(GPIO41, GPIO, NONE, NONE, NONE), + MFP_XWAY(GPIO42, GPIO, MDIO, NONE, NONE), + MFP_XWAY(GPIO43, GPIO, MDIO, NONE, NONE), + MFP_XWAY(GPIO44, GPIO, NONE, NONE, SIN), + MFP_XWAY(GPIO45, GPIO, NONE, NONE, SIN), + MFP_XWAY(GPIO46, GPIO, NONE, NONE, EXIN), + MFP_XWAY(GPIO47, GPIO, NONE, NONE, SIN), + MFP_XWAY(GPIO48, GPIO, EBU, NONE, NONE), + MFP_XWAY(GPIO49, GPIO, EBU, NONE, NONE), + MFP_XWAY(GPIO50, GPIO, NONE, NONE, NONE), + MFP_XWAY(GPIO51, GPIO, NONE, NONE, NONE), + MFP_XWAY(GPIO52, GPIO, NONE, NONE, NONE), + MFP_XWAY(GPIO53, GPIO, NONE, NONE, NONE), + MFP_XWAY(GPIO54, GPIO, NONE, NONE, NONE), + MFP_XWAY(GPIO55, GPIO, NONE, NONE, NONE), +}; + +static const struct ltq_mfp_pin ase_mfp[] = { + /* pin f0 f1 f2 f3 */ + MFP_XWAY(GPIO0, GPIO, EXIN, MII, TDM), + MFP_XWAY(GPIO1, GPIO, STP, DFE, EBU), + MFP_XWAY(GPIO2, GPIO, STP, DFE, EPHY), + MFP_XWAY(GPIO3, GPIO, STP, EPHY, EBU), + MFP_XWAY(GPIO4, GPIO, GPT, EPHY, MII), + MFP_XWAY(GPIO5, GPIO, MII, ASC, GPT), + MFP_XWAY(GPIO6, GPIO, MII, ASC, EXIN), + MFP_XWAY(GPIO7, GPIO, SPI, MII, JTAG), + MFP_XWAY(GPIO8, GPIO, SPI, MII, JTAG), + MFP_XWAY(GPIO9, GPIO, SPI, MII, JTAG), + MFP_XWAY(GPIO10, GPIO, SPI, MII, JTAG), + MFP_XWAY(GPIO11, GPIO, EBU, CGU, JTAG), + MFP_XWAY(GPIO12, GPIO, EBU, MII, SDIO), + MFP_XWAY(GPIO13, GPIO, EBU, MII, CGU), + MFP_XWAY(GPIO14, GPIO, EBU, SPI, CGU), + MFP_XWAY(GPIO15, GPIO, EBU, SPI, SDIO), + MFP_XWAY(GPIO16, GPIO, NONE, NONE, NONE), + MFP_XWAY(GPIO17, GPIO, NONE, NONE, NONE), + MFP_XWAY(GPIO18, GPIO, NONE, NONE, NONE), + MFP_XWAY(GPIO19, GPIO, EBU, MII, SDIO), + MFP_XWAY(GPIO20, GPIO, EBU, MII, SDIO), + MFP_XWAY(GPIO21, GPIO, EBU, MII, SDIO), + MFP_XWAY(GPIO22, GPIO, EBU, MII, CGU), + MFP_XWAY(GPIO23, GPIO, EBU, MII, CGU), + MFP_XWAY(GPIO24, GPIO, EBU, NONE, MII), + MFP_XWAY(GPIO25, GPIO, EBU, MII, GPT), + MFP_XWAY(GPIO26, GPIO, EBU, MII, SDIO), + MFP_XWAY(GPIO27, GPIO, EBU, NONE, MII), + MFP_XWAY(GPIO28, GPIO, MII, EBU, SDIO), + MFP_XWAY(GPIO29, GPIO, EBU, MII, EXIN), + MFP_XWAY(GPIO30, GPIO, NONE, NONE, NONE), + MFP_XWAY(GPIO31, GPIO, NONE, NONE, NONE), +}; + +static const unsigned pins_jtag[] = {GPIO15, GPIO16, GPIO17, GPIO19, GPIO35}; +static const unsigned pins_asc0[] = {GPIO11, GPIO12}; +static const unsigned pins_asc0_cts_rts[] = {GPIO9, GPIO10}; +static const unsigned pins_stp[] = {GPIO4, GPIO5, GPIO6}; +static const unsigned pins_nmi[] = {GPIO8}; +static const unsigned pins_mdio[] = {GPIO42, GPIO43}; + +static const unsigned pins_ebu_a24[] = {GPIO13}; +static const unsigned pins_ebu_clk[] = {GPIO21}; +static const unsigned pins_ebu_cs1[] = {GPIO23}; +static const unsigned pins_ebu_a23[] = {GPIO24}; +static const unsigned pins_ebu_wait[] = {GPIO26}; +static const unsigned pins_ebu_a25[] = {GPIO31}; +static const unsigned pins_ebu_rdy[] = {GPIO48}; +static const unsigned pins_ebu_rd[] = {GPIO49}; + +static const unsigned pins_nand_ale[] = {GPIO13}; +static const unsigned pins_nand_cs1[] = {GPIO23}; +static const unsigned pins_nand_cle[] = {GPIO24}; +static const unsigned pins_nand_rdy[] = {GPIO48}; +static const unsigned pins_nand_rd[] = {GPIO49}; + +static const unsigned pins_exin0[] = {GPIO0}; +static const unsigned pins_exin1[] = {GPIO1}; +static const unsigned pins_exin2[] = {GPIO2}; +static const unsigned pins_exin3[] = {GPIO39}; +static const unsigned pins_exin4[] = {GPIO46}; +static const unsigned pins_exin5[] = {GPIO9}; + +static const unsigned pins_spi[] = {GPIO16, GPIO17, GPIO18}; +static const unsigned pins_spi_cs1[] = {GPIO15}; +static const unsigned pins_spi_cs2[] = {GPIO21}; +static const unsigned pins_spi_cs3[] = {GPIO13}; +static const unsigned pins_spi_cs4[] = {GPIO10}; +static const unsigned pins_spi_cs5[] = {GPIO9}; +static const unsigned pins_spi_cs6[] = {GPIO11}; + +static const unsigned pins_gpt1[] = {GPIO28}; +static const unsigned pins_gpt2[] = {GPIO21}; +static const unsigned pins_gpt3[] = {GPIO6}; + +static const unsigned pins_clkout0[] = {GPIO8}; +static const unsigned pins_clkout1[] = {GPIO7}; +static const unsigned pins_clkout2[] = {GPIO3}; +static const unsigned pins_clkout3[] = {GPIO2}; + +static const unsigned pins_pci_gnt1[] = {GPIO30}; +static const unsigned pins_pci_gnt2[] = {GPIO23}; +static const unsigned pins_pci_gnt3[] = {GPIO19}; +static const unsigned pins_pci_gnt4[] = {GPIO38}; +static const unsigned pins_pci_req1[] = {GPIO29}; +static const unsigned pins_pci_req2[] = {GPIO31}; +static const unsigned pins_pci_req3[] = {GPIO3}; +static const unsigned pins_pci_req4[] = {GPIO37}; + +static const unsigned ase_pins_jtag[] = {GPIO7, GPIO8, GPIO9, GPIO10, GPIO11}; +static const unsigned ase_pins_asc[] = {GPIO5, GPIO6}; +static const unsigned ase_pins_stp[] = {GPIO1, GPIO2, GPIO3}; +static const unsigned ase_pins_ephy[] = {GPIO2, GPIO3, GPIO4}; +static const unsigned ase_pins_dfe[] = {GPIO1, GPIO2}; + +static const unsigned ase_pins_spi[] = {GPIO8, GPIO9, GPIO10}; +static const unsigned ase_pins_spi_cs1[] = {GPIO7}; +static const unsigned ase_pins_spi_cs2[] = {GPIO15}; +static const unsigned ase_pins_spi_cs3[] = {GPIO14}; + +static const unsigned ase_pins_exin0[] = {GPIO6}; +static const unsigned ase_pins_exin1[] = {GPIO29}; +static const unsigned ase_pins_exin2[] = {GPIO0}; + +static const unsigned ase_pins_gpt1[] = {GPIO5}; +static const unsigned ase_pins_gpt2[] = {GPIO4}; +static const unsigned ase_pins_gpt3[] = {GPIO25}; + +static const struct ltq_pin_group xway_grps[] = { + GRP_MUX("exin0", EXIN, pins_exin0), + GRP_MUX("exin1", EXIN, pins_exin1), + GRP_MUX("exin2", EXIN, pins_exin2), + GRP_MUX("jtag", JTAG, pins_jtag), + GRP_MUX("ebu a23", EBU, pins_ebu_a23), + GRP_MUX("ebu a24", EBU, pins_ebu_a24), + GRP_MUX("ebu a25", EBU, pins_ebu_a25), + GRP_MUX("ebu clk", EBU, pins_ebu_clk), + GRP_MUX("ebu cs1", EBU, pins_ebu_cs1), + GRP_MUX("ebu wait", EBU, pins_ebu_wait), + GRP_MUX("nand ale", EBU, pins_nand_ale), + GRP_MUX("nand cs1", EBU, pins_nand_cs1), + GRP_MUX("nand cle", EBU, pins_nand_cle), + GRP_MUX("spi", SPI, pins_spi), + GRP_MUX("spi_cs1", SPI, pins_spi_cs1), + GRP_MUX("spi_cs2", SPI, pins_spi_cs2), + GRP_MUX("spi_cs3", SPI, pins_spi_cs3), + GRP_MUX("spi_cs4", SPI, pins_spi_cs4), + GRP_MUX("spi_cs5", SPI, pins_spi_cs5), + GRP_MUX("spi_cs6", SPI, pins_spi_cs6), + GRP_MUX("asc0", ASC, pins_asc0), + GRP_MUX("asc0 cts rts", ASC, pins_asc0_cts_rts), + GRP_MUX("stp", STP, pins_stp), + GRP_MUX("nmi", NMI, pins_nmi), + GRP_MUX("gpt1", GPT, pins_gpt1), + GRP_MUX("gpt2", GPT, pins_gpt2), + GRP_MUX("gpt3", GPT, pins_gpt3), + GRP_MUX("clkout0", CGU, pins_clkout0), + GRP_MUX("clkout1", CGU, pins_clkout1), + GRP_MUX("clkout2", CGU, pins_clkout2), + GRP_MUX("clkout3", CGU, pins_clkout3), + GRP_MUX("gnt1", PCI, pins_pci_gnt1), + GRP_MUX("gnt2", PCI, pins_pci_gnt2), + GRP_MUX("gnt3", PCI, pins_pci_gnt3), + GRP_MUX("req1", PCI, pins_pci_req1), + GRP_MUX("req2", PCI, pins_pci_req2), + GRP_MUX("req3", PCI, pins_pci_req3), +/* xrx only */ + GRP_MUX("nand rdy", EBU, pins_nand_rdy), + GRP_MUX("nand rd", EBU, pins_nand_rd), + GRP_MUX("exin3", EXIN, pins_exin3), + GRP_MUX("exin4", EXIN, pins_exin4), + GRP_MUX("exin5", EXIN, pins_exin5), + GRP_MUX("gnt4", PCI, pins_pci_gnt4), + GRP_MUX("req4", PCI, pins_pci_gnt4), + GRP_MUX("mdio", MDIO, pins_mdio), +}; + +static const struct ltq_pin_group ase_grps[] = { + GRP_MUX("exin0", EXIN, ase_pins_exin0), + GRP_MUX("exin1", EXIN, ase_pins_exin1), + GRP_MUX("exin2", EXIN, ase_pins_exin2), + GRP_MUX("jtag", JTAG, ase_pins_jtag), + GRP_MUX("stp", STP, ase_pins_stp), + GRP_MUX("asc", ASC, ase_pins_asc), + GRP_MUX("gpt1", GPT, ase_pins_gpt1), + GRP_MUX("gpt2", GPT, ase_pins_gpt2), + GRP_MUX("gpt3", GPT, ase_pins_gpt3), + GRP_MUX("ephy", EPHY, ase_pins_ephy), + GRP_MUX("dfe", DFE, ase_pins_dfe), + GRP_MUX("spi", SPI, ase_pins_spi), + GRP_MUX("spi_cs1", SPI, ase_pins_spi_cs1), + GRP_MUX("spi_cs2", SPI, ase_pins_spi_cs2), + GRP_MUX("spi_cs3", SPI, ase_pins_spi_cs3), +}; + +static const char * const xway_pci_grps[] = {"gnt1", "gnt2", + "gnt3", "req1", + "req2", "req3"}; +static const char * const xway_spi_grps[] = {"spi", "spi_cs1", + "spi_cs2", "spi_cs3", + "spi_cs4", "spi_cs5", + "spi_cs6"}; +static const char * const xway_cgu_grps[] = {"clkout0", "clkout1", + "clkout2", "clkout3"}; +static const char * const xway_ebu_grps[] = {"ebu a23", "ebu a24", + "ebu a25", "ebu cs1", + "ebu wait", "ebu clk", + "nand ale", "nand cs1", + "nand cle"}; +static const char * const xway_exin_grps[] = {"exin0", "exin1", "exin2"}; +static const char * const xway_gpt_grps[] = {"gpt1", "gpt2", "gpt3"}; +static const char * const xway_asc_grps[] = {"asc0", "asc0 cts rts"}; +static const char * const xway_jtag_grps[] = {"jtag"}; +static const char * const xway_stp_grps[] = {"stp"}; +static const char * const xway_nmi_grps[] = {"nmi"}; + +/* ar9/vr9/gr9 */ +static const char * const xrx_mdio_grps[] = {"mdio"}; +static const char * const xrx_ebu_grps[] = {"ebu a23", "ebu a24", + "ebu a25", "ebu cs1", + "ebu wait", "ebu clk", + "nand ale", "nand cs1", + "nand cle", "nand rdy", + "nand rd"}; +static const char * const xrx_exin_grps[] = {"exin0", "exin1", "exin2", + "exin3", "exin4", "exin5"}; +static const char * const xrx_pci_grps[] = {"gnt1", "gnt2", + "gnt3", "gnt4", + "req1", "req2", + "req3", "req4"}; + +/* ase */ +static const char * const ase_exin_grps[] = {"exin0", "exin1", "exin2"}; +static const char * const ase_gpt_grps[] = {"gpt1", "gpt2", "gpt3"}; +static const char * const ase_dfe_grps[] = {"dfe"}; +static const char * const ase_ephy_grps[] = {"ephy"}; +static const char * const ase_asc_grps[] = {"asc"}; +static const char * const ase_jtag_grps[] = {"jtag"}; +static const char * const ase_stp_grps[] = {"stp"}; +static const char * const ase_spi_grps[] = {"spi", "spi_cs1", + "spi_cs2", "spi_cs3"}; + +static const struct ltq_pmx_func danube_funcs[] = { + {"spi", ARRAY_AND_SIZE(xway_spi_grps)}, + {"asc", ARRAY_AND_SIZE(xway_asc_grps)}, + {"cgu", ARRAY_AND_SIZE(xway_cgu_grps)}, + {"jtag", ARRAY_AND_SIZE(xway_jtag_grps)}, + {"exin", ARRAY_AND_SIZE(xway_exin_grps)}, + {"stp", ARRAY_AND_SIZE(xway_stp_grps)}, + {"gpt", ARRAY_AND_SIZE(xway_gpt_grps)}, + {"nmi", ARRAY_AND_SIZE(xway_nmi_grps)}, + {"pci", ARRAY_AND_SIZE(xway_pci_grps)}, + {"ebu", ARRAY_AND_SIZE(xway_ebu_grps)}, +}; + +static const struct ltq_pmx_func xrx_funcs[] = { + {"spi", ARRAY_AND_SIZE(xway_spi_grps)}, + {"asc", ARRAY_AND_SIZE(xway_asc_grps)}, + {"cgu", ARRAY_AND_SIZE(xway_cgu_grps)}, + {"jtag", ARRAY_AND_SIZE(xway_jtag_grps)}, + {"exin", ARRAY_AND_SIZE(xrx_exin_grps)}, + {"stp", ARRAY_AND_SIZE(xway_stp_grps)}, + {"gpt", ARRAY_AND_SIZE(xway_gpt_grps)}, + {"nmi", ARRAY_AND_SIZE(xway_nmi_grps)}, + {"pci", ARRAY_AND_SIZE(xrx_pci_grps)}, + {"ebu", ARRAY_AND_SIZE(xrx_ebu_grps)}, + {"mdio", ARRAY_AND_SIZE(xrx_mdio_grps)}, +}; + +static const struct ltq_pmx_func ase_funcs[] = { + {"spi", ARRAY_AND_SIZE(ase_spi_grps)}, + {"asc", ARRAY_AND_SIZE(ase_asc_grps)}, + {"jtag", ARRAY_AND_SIZE(ase_jtag_grps)}, + {"exin", ARRAY_AND_SIZE(ase_exin_grps)}, + {"stp", ARRAY_AND_SIZE(ase_stp_grps)}, + {"gpt", ARRAY_AND_SIZE(ase_gpt_grps)}, + {"ephy", ARRAY_AND_SIZE(ase_ephy_grps)}, + {"dfe", ARRAY_AND_SIZE(ase_dfe_grps)}, +}; + +/* --------- pinconf related code --------- */ +static int xway_pinconf_get(struct pinctrl_dev *pctldev, + unsigned pin, + unsigned long *config) +{ + struct ltq_pinmux_info *info = pinctrl_dev_get_drvdata(pctldev); + enum ltq_pinconf_param param = LTQ_PINCONF_UNPACK_PARAM(*config); + int port = PORT(pin); + u32 reg; + + switch (param) { + case LTQ_PINCONF_PARAM_OPEN_DRAIN: + if (port == PORT3) + reg = GPIO3_OD; + else + reg = GPIO_OD(port); + *config = LTQ_PINCONF_PACK(param, + !!gpio_getbit(info->membase[0], reg, PORT_PIN(port))); + break; + + case LTQ_PINCONF_PARAM_PULL: + if (port == PORT3) + reg = GPIO3_PUDEN; + else + reg = GPIO_PUDEN(port); + if (!gpio_getbit(info->membase[0], reg, PORT_PIN(port))) { + *config = LTQ_PINCONF_PACK(param, 0); + break; + } + + if (port == PORT3) + reg = GPIO3_PUDSEL; + else + reg = GPIO_PUDSEL(port); + if (!gpio_getbit(info->membase[0], reg, PORT_PIN(port))) + *config = LTQ_PINCONF_PACK(param, 2); + else + *config = LTQ_PINCONF_PACK(param, 1); + break; + + default: + dev_err(pctldev->dev, "Invalid config param %04x\n", param); + return -ENOTSUPP; + } + return 0; +} + +static int xway_pinconf_set(struct pinctrl_dev *pctldev, + unsigned pin, + unsigned long config) +{ + struct ltq_pinmux_info *info = pinctrl_dev_get_drvdata(pctldev); + enum ltq_pinconf_param param = LTQ_PINCONF_UNPACK_PARAM(config); + int arg = LTQ_PINCONF_UNPACK_ARG(config); + int port = PORT(pin); + u32 reg; + + switch (param) { + case LTQ_PINCONF_PARAM_OPEN_DRAIN: + if (port == PORT3) + reg = GPIO3_OD; + else + reg = GPIO_OD(port); + gpio_setbit(info->membase[0], reg, PORT_PIN(port)); + break; + + case LTQ_PINCONF_PARAM_PULL: + if (port == PORT3) + reg = GPIO3_PUDEN; + else + reg = GPIO_PUDEN(port); + if (arg == 0) { + gpio_clearbit(info->membase[0], reg, PORT_PIN(port)); + break; + } + gpio_setbit(info->membase[0], reg, PORT_PIN(port)); + + if (port == PORT3) + reg = GPIO3_PUDSEL; + else + reg = GPIO_PUDSEL(port); + if (arg == 1) + gpio_clearbit(info->membase[0], reg, PORT_PIN(port)); + else if (arg == 2) + gpio_setbit(info->membase[0], reg, PORT_PIN(port)); + else + dev_err(pctldev->dev, "Invalid pull value %d\n", arg); + break; + + default: + dev_err(pctldev->dev, "Invalid config param %04x\n", param); + return -ENOTSUPP; + } + return 0; +} + +struct pinconf_ops xway_pinconf_ops = { + .pin_config_get = xway_pinconf_get, + .pin_config_set = xway_pinconf_set, +}; + +static struct pinctrl_desc xway_pctrl_desc = { + .owner = THIS_MODULE, + .confops = &xway_pinconf_ops, +}; + +static inline int xway_mux_apply(struct pinctrl_dev *pctrldev, + int pin, int mux) +{ + struct ltq_pinmux_info *info = pinctrl_dev_get_drvdata(pctrldev); + int port = PORT(pin); + u32 alt1_reg = GPIO_ALT1(pin); + + if (port == PORT3) + alt1_reg = GPIO3_ALT1; + + if (mux & MUX_ALT0) + gpio_setbit(info->membase[0], GPIO_ALT0(pin), PORT_PIN(pin)); + else + gpio_clearbit(info->membase[0], GPIO_ALT0(pin), PORT_PIN(pin)); + + if (mux & MUX_ALT1) + gpio_setbit(info->membase[0], alt1_reg, PORT_PIN(pin)); + else + gpio_clearbit(info->membase[0], alt1_reg, PORT_PIN(pin)); + + return 0; +} + +static const struct ltq_cfg_param xway_cfg_params[] = { + {"lantiq,pull", LTQ_PINCONF_PARAM_PULL}, + {"lantiq,open-drain", LTQ_PINCONF_PARAM_OPEN_DRAIN}, +}; + +static struct ltq_pinmux_info xway_info = { + .desc = &xway_pctrl_desc, + .apply_mux = xway_mux_apply, + .params = xway_cfg_params, + .num_params = ARRAY_SIZE(xway_cfg_params), +}; + +/* --------- gpio_chip related code --------- */ +static void xway_gpio_set(struct gpio_chip *chip, unsigned int pin, int val) +{ + struct ltq_pinmux_info *info = dev_get_drvdata(chip->dev); + + if (val) + gpio_setbit(info->membase[0], GPIO_OUT(pin), PORT_PIN(pin)); + else + gpio_clearbit(info->membase[0], GPIO_OUT(pin), PORT_PIN(pin)); +} + +static int xway_gpio_get(struct gpio_chip *chip, unsigned int pin) +{ + struct ltq_pinmux_info *info = dev_get_drvdata(chip->dev); + + return gpio_getbit(info->membase[0], GPIO_IN(pin), PORT_PIN(pin)); +} + +static int xway_gpio_dir_in(struct gpio_chip *chip, unsigned int pin) +{ + struct ltq_pinmux_info *info = dev_get_drvdata(chip->dev); + + gpio_clearbit(info->membase[0], GPIO_DIR(pin), PORT_PIN(pin)); + + return 0; +} + +static int xway_gpio_dir_out(struct gpio_chip *chip, unsigned int pin, int val) +{ + struct ltq_pinmux_info *info = dev_get_drvdata(chip->dev); + + gpio_setbit(info->membase[0], GPIO_DIR(pin), PORT_PIN(pin)); + xway_gpio_set(chip, pin, val); + + return 0; +} + +static int xway_gpio_req(struct gpio_chip *chip, unsigned offset) +{ + int gpio = chip->base + offset; + + return pinctrl_request_gpio(gpio); +} + +static void xway_gpio_free(struct gpio_chip *chip, unsigned offset) +{ + int gpio = chip->base + offset; + + pinctrl_free_gpio(gpio); +} + +static struct gpio_chip xway_chip = { + .label = "gpio-xway", + .direction_input = xway_gpio_dir_in, + .direction_output = xway_gpio_dir_out, + .get = xway_gpio_get, + .set = xway_gpio_set, + .request = xway_gpio_req, + .free = xway_gpio_free, + .base = -1, +}; + + +/* --------- register the pinctrl layer --------- */ +static const unsigned xway_exin_pin_map[] = {GPIO0, GPIO1, GPIO2, GPIO39, GPIO46, GPIO9}; +static const unsigned ase_exin_pins_map[] = {GPIO6, GPIO29, GPIO0}; + +static struct pinctrl_xway_soc { + int pin_count; + const struct ltq_mfp_pin *mfp; + const struct ltq_pin_group *grps; + unsigned int num_grps; + const struct ltq_pmx_func *funcs; + unsigned int num_funcs; + const unsigned *exin; + unsigned int num_exin; +} soc_cfg[] = { + /* legacy xway */ + {XWAY_MAX_PIN, xway_mfp, + xway_grps, ARRAY_SIZE(xway_grps), + danube_funcs, ARRAY_SIZE(danube_funcs), + xway_exin_pin_map, 3}, + /* xway xr9 series */ + {XR9_MAX_PIN, xway_mfp, + xway_grps, ARRAY_SIZE(xway_grps), + xrx_funcs, ARRAY_SIZE(xrx_funcs), + xway_exin_pin_map, 6}, + /* xway ase series */ + {XWAY_MAX_PIN, ase_mfp, + ase_grps, ARRAY_SIZE(ase_grps), + ase_funcs, ARRAY_SIZE(ase_funcs), + ase_exin_pins_map, 3}, +}; + +static struct pinctrl_gpio_range xway_gpio_range = { + .name = "XWAY GPIO", + .gc = &xway_chip, +}; + +static const struct of_device_id xway_match[] = { + { .compatible = "lantiq,pinctrl-xway", .data = &soc_cfg[0]}, + { .compatible = "lantiq,pinctrl-xr9", .data = &soc_cfg[1]}, + { .compatible = "lantiq,pinctrl-ase", .data = &soc_cfg[2]}, + {}, +}; +MODULE_DEVICE_TABLE(of, xway_match); + +static int __devinit pinmux_xway_probe(struct platform_device *pdev) +{ + const struct of_device_id *match; + const struct pinctrl_xway_soc *xway_soc; + struct resource *res; + int ret, i; + + /* get and remap our register range */ + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + dev_err(&pdev->dev, "Failed to get resource\n"); + return -ENOENT; + } + xway_info.membase[0] = devm_request_and_ioremap(&pdev->dev, res); + if (!xway_info.membase[0]) { + dev_err(&pdev->dev, "Failed to remap resource\n"); + return -ENOMEM; + } + + match = of_match_device(xway_match, &pdev->dev); + if (match) + xway_soc = (const struct pinctrl_xway_soc *) match->data; + else + xway_soc = &soc_cfg[0]; + + /* find out how many pads we have */ + xway_chip.ngpio = xway_soc->pin_count; + + /* load our pad descriptors */ + xway_info.pads = devm_kzalloc(&pdev->dev, + sizeof(struct pinctrl_pin_desc) * xway_chip.ngpio, + GFP_KERNEL); + if (!xway_info.pads) { + dev_err(&pdev->dev, "Failed to allocate pads\n"); + return -ENOMEM; + } + for (i = 0; i < xway_chip.ngpio; i++) { + /* strlen("ioXY") + 1 = 5 */ + char *name = devm_kzalloc(&pdev->dev, 5, GFP_KERNEL); + + if (!name) { + dev_err(&pdev->dev, "Failed to allocate pad name\n"); + return -ENOMEM; + } + snprintf(name, 5, "io%d", i); + xway_info.pads[i].number = GPIO0 + i; + xway_info.pads[i].name = name; + } + xway_pctrl_desc.pins = xway_info.pads; + + /* load the gpio chip */ + xway_chip.dev = &pdev->dev; + of_gpiochip_add(&xway_chip); + ret = gpiochip_add(&xway_chip); + if (ret) { + dev_err(&pdev->dev, "Failed to register gpio chip\n"); + return ret; + } + + /* setup the data needed by pinctrl */ + xway_pctrl_desc.name = dev_name(&pdev->dev); + xway_pctrl_desc.npins = xway_chip.ngpio; + + xway_info.num_pads = xway_chip.ngpio; + xway_info.num_mfp = xway_chip.ngpio; + xway_info.mfp = xway_soc->mfp; + xway_info.grps = xway_soc->grps; + xway_info.num_grps = xway_soc->num_grps; + xway_info.funcs = xway_soc->funcs; + xway_info.num_funcs = xway_soc->num_funcs; + xway_info.exin = xway_soc->exin; + xway_info.num_exin = xway_soc->num_exin; + + /* register with the generic lantiq layer */ + ret = ltq_pinctrl_register(pdev, &xway_info); + if (ret) { + dev_err(&pdev->dev, "Failed to register pinctrl driver\n"); + return ret; + } + + /* finish with registering the gpio range in pinctrl */ + xway_gpio_range.npins = xway_chip.ngpio; + xway_gpio_range.base = xway_chip.base; + pinctrl_add_gpio_range(xway_info.pctrl, &xway_gpio_range); + dev_info(&pdev->dev, "Init done\n"); + return 0; +} + +static struct platform_driver pinmux_xway_driver = { + .probe = pinmux_xway_probe, + .driver = { + .name = "pinctrl-xway", + .owner = THIS_MODULE, + .of_match_table = xway_match, + }, +}; + +static int __init pinmux_xway_init(void) +{ + return platform_driver_register(&pinmux_xway_driver); +} + +core_initcall_sync(pinmux_xway_init); |