summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2014-04-01 11:00:07 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2014-04-01 11:00:07 -0700
commit1ead65812486cda65093683a99b8907a7242fa93 (patch)
tree094684870815537aae4aedb69c10d669ba29f0af
parentb6d739e9581272f0bbbd6edd15340fb8e108df96 (diff)
parentb97f0291a2504291aef850077f98cab68a5a2f33 (diff)
downloadlinux-1ead65812486cda65093683a99b8907a7242fa93.tar.bz2
Merge branch 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer changes from Thomas Gleixner: "This assorted collection provides: - A new timer based timer broadcast feature for systems which do not provide a global accessible timer device. That allows those systems to put CPUs into deep idle states where the per cpu timer device stops. - A few NOHZ_FULL related improvements to the timer wheel - The usual updates to timer devices found in ARM SoCs - Small improvements and updates all over the place" * 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (44 commits) tick: Remove code duplication in tick_handle_periodic() tick: Fix spelling mistake in tick_handle_periodic() x86: hpet: Use proper destructor for delayed work workqueue: Provide destroy_delayed_work_on_stack() clocksource: CMT, MTU2, TMU and STI should depend on GENERIC_CLOCKEVENTS timer: Remove code redundancy while calling get_nohz_timer_target() hrtimer: Rearrange comments in the order struct members are declared timer: Use variable head instead of &work_list in __run_timers() clocksource: exynos_mct: silence a static checker warning arm: zynq: Add support for cpufreq arm: zynq: Don't use arm_global_timer with cpufreq clocksource/cadence_ttc: Overhaul clocksource frequency adjustment clocksource/cadence_ttc: Call clockevents_update_freq() with IRQs enabled clocksource: Add Kconfig entries for CMT, MTU2, TMU and STI sh: Remove Kconfig entries for TMU, CMT and MTU2 ARM: shmobile: Remove CMT, TMU and STI Kconfig entries clocksource: armada-370-xp: Use atomic access for shared registers clocksource: orion: Use atomic access for shared registers clocksource: timer-keystone: Delete unnecessary variable clocksource: timer-keystone: introduce clocksource driver for Keystone ...
-rw-r--r--Documentation/devicetree/bindings/timer/allwinner,sun4i-timer.txt4
-rw-r--r--Documentation/devicetree/bindings/timer/ti,keystone-timer.txt29
-rw-r--r--MAINTAINERS1
-rw-r--r--arch/arm/boot/dts/sun4i-a10.dtsi2
-rw-r--r--arch/arm/boot/dts/sun5i-a10s.dtsi2
-rw-r--r--arch/arm/boot/dts/sun5i-a13.dtsi2
-rw-r--r--arch/arm/boot/dts/sun6i-a31.dtsi2
-rw-r--r--arch/arm/boot/dts/sun7i-a20.dtsi2
-rw-r--r--arch/arm/boot/dts/zynq-7000.dtsi6
-rw-r--r--arch/arm/mach-shmobile/Kconfig36
-rw-r--r--arch/arm/mach-u300/Makefile2
-rw-r--r--arch/arm/mach-zynq/Kconfig4
-rw-r--r--arch/arm/mach-zynq/common.c3
-rw-r--r--arch/sh/Kconfig76
-rw-r--r--arch/x86/kernel/hpet.c2
-rw-r--r--drivers/clocksource/Kconfig48
-rw-r--r--drivers/clocksource/Makefile2
-rw-r--r--drivers/clocksource/arm_arch_timer.c1
-rw-r--r--drivers/clocksource/cadence_ttc_timer.c121
-rw-r--r--drivers/clocksource/exynos_mct.c2
-rw-r--r--drivers/clocksource/sun4i_timer.c2
-rw-r--r--drivers/clocksource/time-armada-370-xp.c12
-rw-r--r--drivers/clocksource/time-orion.c28
-rw-r--r--drivers/clocksource/timer-keystone.c241
-rw-r--r--drivers/clocksource/timer-u300.c (renamed from arch/arm/mach-u300/timer.c)4
-rw-r--r--drivers/cpuidle/cpuidle.c14
-rw-r--r--fs/timerfd.c1
-rw-r--r--include/linux/clockchips.h16
-rw-r--r--include/linux/hrtimer.h4
-rw-r--r--include/linux/sched.h6
-rw-r--r--include/linux/workqueue.h2
-rw-r--r--kernel/hrtimer.c15
-rw-r--r--kernel/sched/core.c5
-rw-r--r--kernel/time/Kconfig2
-rw-r--r--kernel/time/Makefile5
-rw-r--r--kernel/time/clockevents.c40
-rw-r--r--kernel/time/ntp.c5
-rw-r--r--kernel/time/tick-broadcast-hrtimer.c106
-rw-r--r--kernel/time/tick-broadcast.c85
-rw-r--r--kernel/time/tick-common.c16
-rw-r--r--kernel/time/tick-internal.h11
-rw-r--r--kernel/time/timekeeping_debug.c2
-rw-r--r--kernel/timer.c57
-rw-r--r--kernel/workqueue.c7
44 files changed, 807 insertions, 226 deletions
diff --git a/Documentation/devicetree/bindings/timer/allwinner,sun4i-timer.txt b/Documentation/devicetree/bindings/timer/allwinner,sun4i-timer.txt
index 48aeb7884ed3..5c2e23574ca0 100644
--- a/Documentation/devicetree/bindings/timer/allwinner,sun4i-timer.txt
+++ b/Documentation/devicetree/bindings/timer/allwinner,sun4i-timer.txt
@@ -2,7 +2,7 @@ Allwinner A1X SoCs Timer Controller
Required properties:
-- compatible : should be "allwinner,sun4i-timer"
+- compatible : should be "allwinner,sun4i-a10-timer"
- reg : Specifies base physical address and size of the registers.
- interrupts : The interrupt of the first timer
- clocks: phandle to the source clock (usually a 24 MHz fixed clock)
@@ -10,7 +10,7 @@ Required properties:
Example:
timer {
- compatible = "allwinner,sun4i-timer";
+ compatible = "allwinner,sun4i-a10-timer";
reg = <0x01c20c00 0x400>;
interrupts = <22>;
clocks = <&osc>;
diff --git a/Documentation/devicetree/bindings/timer/ti,keystone-timer.txt b/Documentation/devicetree/bindings/timer/ti,keystone-timer.txt
new file mode 100644
index 000000000000..5fbe361252b4
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/ti,keystone-timer.txt
@@ -0,0 +1,29 @@
+* Device tree bindings for Texas instruments Keystone timer
+
+This document provides bindings for the 64-bit timer in the KeyStone
+architecture devices. The timer can be configured as a general-purpose 64-bit
+timer, dual general-purpose 32-bit timers. When configured as dual 32-bit
+timers, each half can operate in conjunction (chain mode) or independently
+(unchained mode) of each other.
+
+It is global timer is a free running up-counter and can generate interrupt
+when the counter reaches preset counter values.
+
+Documentation:
+http://www.ti.com/lit/ug/sprugv5a/sprugv5a.pdf
+
+Required properties:
+
+- compatible : should be "ti,keystone-timer".
+- reg : specifies base physical address and count of the registers.
+- interrupts : interrupt generated by the timer.
+- clocks : the clock feeding the timer clock.
+
+Example:
+
+timer@22f0000 {
+ compatible = "ti,keystone-timer";
+ reg = <0x022f0000 0x80>;
+ interrupts = <GIC_SPI 110 IRQ_TYPE_EDGE_RISING>;
+ clocks = <&clktimer15>;
+};
diff --git a/MAINTAINERS b/MAINTAINERS
index 79031a56711b..d1f3cb340e01 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1320,6 +1320,7 @@ M: Linus Walleij <linus.walleij@linaro.org>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Supported
F: arch/arm/mach-u300/
+F: drivers/clocksource/timer-u300.c
F: drivers/i2c/busses/i2c-stu300.c
F: drivers/rtc/rtc-coh901331.c
F: drivers/watchdog/coh901327_wdt.c
diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi
index d4d2763f4794..2ce61228d5f9 100644
--- a/arch/arm/boot/dts/sun4i-a10.dtsi
+++ b/arch/arm/boot/dts/sun4i-a10.dtsi
@@ -403,7 +403,7 @@
};
timer@01c20c00 {
- compatible = "allwinner,sun4i-timer";
+ compatible = "allwinner,sun4i-a10-timer";
reg = <0x01c20c00 0x90>;
interrupts = <22>;
clocks = <&osc24M>;
diff --git a/arch/arm/boot/dts/sun5i-a10s.dtsi b/arch/arm/boot/dts/sun5i-a10s.dtsi
index 79fd412005b0..29dd32d8e77e 100644
--- a/arch/arm/boot/dts/sun5i-a10s.dtsi
+++ b/arch/arm/boot/dts/sun5i-a10s.dtsi
@@ -366,7 +366,7 @@
};
timer@01c20c00 {
- compatible = "allwinner,sun4i-timer";
+ compatible = "allwinner,sun4i-a10-timer";
reg = <0x01c20c00 0x90>;
interrupts = <22>;
clocks = <&osc24M>;
diff --git a/arch/arm/boot/dts/sun5i-a13.dtsi b/arch/arm/boot/dts/sun5i-a13.dtsi
index c463fd730c91..e63bb383b43d 100644
--- a/arch/arm/boot/dts/sun5i-a13.dtsi
+++ b/arch/arm/boot/dts/sun5i-a13.dtsi
@@ -329,7 +329,7 @@
};
timer@01c20c00 {
- compatible = "allwinner,sun4i-timer";
+ compatible = "allwinner,sun4i-a10-timer";
reg = <0x01c20c00 0x90>;
interrupts = <22>;
clocks = <&osc24M>;
diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi
index 5256ad9be52c..996fff54c8a2 100644
--- a/arch/arm/boot/dts/sun6i-a31.dtsi
+++ b/arch/arm/boot/dts/sun6i-a31.dtsi
@@ -231,7 +231,7 @@
};
timer@01c20c00 {
- compatible = "allwinner,sun4i-timer";
+ compatible = "allwinner,sun4i-a10-timer";
reg = <0x01c20c00 0xa0>;
interrupts = <0 18 4>,
<0 19 4>,
diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi
index 6f25cf559ad0..dddc8ac2d522 100644
--- a/arch/arm/boot/dts/sun7i-a20.dtsi
+++ b/arch/arm/boot/dts/sun7i-a20.dtsi
@@ -435,7 +435,7 @@
};
timer@01c20c00 {
- compatible = "allwinner,sun4i-timer";
+ compatible = "allwinner,sun4i-a10-timer";
reg = <0x01c20c00 0x90>;
interrupts = <0 22 4>,
<0 23 4>,
diff --git a/arch/arm/boot/dts/zynq-7000.dtsi b/arch/arm/boot/dts/zynq-7000.dtsi
index 8b67b19392ec..789d0bacc110 100644
--- a/arch/arm/boot/dts/zynq-7000.dtsi
+++ b/arch/arm/boot/dts/zynq-7000.dtsi
@@ -24,6 +24,12 @@
device_type = "cpu";
reg = <0>;
clocks = <&clkc 3>;
+ operating-points = <
+ /* kHz uV */
+ 666667 1000000
+ 333334 1000000
+ 222223 1000000
+ >;
};
cpu@1 {
diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig
index 05fa505df585..f6db7dcae3f4 100644
--- a/arch/arm/mach-shmobile/Kconfig
+++ b/arch/arm/mach-shmobile/Kconfig
@@ -24,17 +24,21 @@ comment "Renesas ARM SoCs System Type"
config ARCH_EMEV2
bool "Emma Mobile EV2"
+ select SYS_SUPPORTS_EM_STI
config ARCH_R7S72100
bool "RZ/A1H (R7S72100)"
+ select SYS_SUPPORTS_SH_MTU2
config ARCH_R8A7790
bool "R-Car H2 (R8A77900)"
select RENESAS_IRQC
+ select SYS_SUPPORTS_SH_CMT
config ARCH_R8A7791
bool "R-Car M2 (R8A77910)"
select RENESAS_IRQC
+ select SYS_SUPPORTS_SH_CMT
comment "Renesas ARM SoCs Board Type"
@@ -68,6 +72,8 @@ config ARCH_SH7372
select ARM_CPU_SUSPEND if PM || CPU_IDLE
select CPU_V7
select SH_CLK_CPG
+ select SYS_SUPPORTS_SH_CMT
+ select SYS_SUPPORTS_SH_TMU
config ARCH_SH73A0
bool "SH-Mobile AG5 (R8A73A00)"
@@ -77,6 +83,8 @@ config ARCH_SH73A0
select I2C
select SH_CLK_CPG
select RENESAS_INTC_IRQPIN
+ select SYS_SUPPORTS_SH_CMT
+ select SYS_SUPPORTS_SH_TMU
config ARCH_R8A73A4
bool "R-Mobile APE6 (R8A73A40)"
@@ -87,6 +95,8 @@ config ARCH_R8A73A4
select RENESAS_IRQC
select ARCH_HAS_CPUFREQ
select ARCH_HAS_OPP
+ select SYS_SUPPORTS_SH_CMT
+ select SYS_SUPPORTS_SH_TMU
config ARCH_R8A7740
bool "R-Mobile A1 (R8A77400)"
@@ -95,6 +105,8 @@ config ARCH_R8A7740
select CPU_V7
select SH_CLK_CPG
select RENESAS_INTC_IRQPIN
+ select SYS_SUPPORTS_SH_CMT
+ select SYS_SUPPORTS_SH_TMU
config ARCH_R8A7778
bool "R-Car M1A (R8A77781)"
@@ -104,6 +116,7 @@ config ARCH_R8A7778
select ARM_GIC
select USB_ARCH_HAS_EHCI
select USB_ARCH_HAS_OHCI
+ select SYS_SUPPORTS_SH_TMU
config ARCH_R8A7779
bool "R-Car H1 (R8A77790)"
@@ -114,6 +127,7 @@ config ARCH_R8A7779
select USB_ARCH_HAS_EHCI
select USB_ARCH_HAS_OHCI
select RENESAS_INTC_IRQPIN
+ select SYS_SUPPORTS_SH_TMU
config ARCH_R8A7790
bool "R-Car H2 (R8A77900)"
@@ -123,6 +137,7 @@ config ARCH_R8A7790
select MIGHT_HAVE_PCI
select SH_CLK_CPG
select RENESAS_IRQC
+ select SYS_SUPPORTS_SH_CMT
config ARCH_R8A7791
bool "R-Car M2 (R8A77910)"
@@ -132,6 +147,7 @@ config ARCH_R8A7791
select MIGHT_HAVE_PCI
select SH_CLK_CPG
select RENESAS_IRQC
+ select SYS_SUPPORTS_SH_CMT
config ARCH_EMEV2
bool "Emma Mobile EV2"
@@ -141,6 +157,7 @@ config ARCH_EMEV2
select MIGHT_HAVE_PCI
select USE_OF
select AUTO_ZRELADDR
+ select SYS_SUPPORTS_EM_STI
config ARCH_R7S72100
bool "RZ/A1H (R7S72100)"
@@ -148,6 +165,7 @@ config ARCH_R7S72100
select ARM_GIC
select CPU_V7
select SH_CLK_CPG
+ select SYS_SUPPORTS_SH_MTU2
comment "Renesas ARM SoCs Board Type"
@@ -321,24 +339,6 @@ config SHMOBILE_TIMER_HZ
want to select a HZ value such as 128 that can evenly divide RCLK.
A HZ value that does not divide evenly may cause timer drift.
-config SH_TIMER_CMT
- bool "CMT timer driver"
- default y
- help
- This enables build of the CMT timer driver.
-
-config SH_TIMER_TMU
- bool "TMU timer driver"
- default y
- help
- This enables build of the TMU timer driver.
-
-config EM_TIMER_STI
- bool "STI timer driver"
- default y
- help
- This enables build of the STI timer driver.
-
endmenu
endif
diff --git a/arch/arm/mach-u300/Makefile b/arch/arm/mach-u300/Makefile
index 0f362b64fb87..3ec74ac95bc1 100644
--- a/arch/arm/mach-u300/Makefile
+++ b/arch/arm/mach-u300/Makefile
@@ -2,7 +2,7 @@
# Makefile for the linux kernel, U300 machine.
#
-obj-y := core.o timer.o
+obj-y := core.o
obj-m :=
obj-n :=
obj- :=
diff --git a/arch/arm/mach-zynq/Kconfig b/arch/arm/mach-zynq/Kconfig
index 6b04260aa142..f03e75bd0b2b 100644
--- a/arch/arm/mach-zynq/Kconfig
+++ b/arch/arm/mach-zynq/Kconfig
@@ -2,6 +2,8 @@ config ARCH_ZYNQ
bool "Xilinx Zynq ARM Cortex A9 Platform" if ARCH_MULTI_V7
select ARM_AMBA
select ARM_GIC
+ select ARCH_HAS_CPUFREQ
+ select ARCH_HAS_OPP
select COMMON_CLK
select CPU_V7
select GENERIC_CLOCKEVENTS
@@ -13,6 +15,6 @@ config ARCH_ZYNQ
select HAVE_SMP
select SPARSE_IRQ
select CADENCE_TTC_TIMER
- select ARM_GLOBAL_TIMER
+ select ARM_GLOBAL_TIMER if !CPU_FREQ
help
Support for Xilinx Zynq ARM Cortex A9 Platform
diff --git a/arch/arm/mach-zynq/common.c b/arch/arm/mach-zynq/common.c
index 8c09a8393fb6..a39be8e80856 100644
--- a/arch/arm/mach-zynq/common.c
+++ b/arch/arm/mach-zynq/common.c
@@ -64,6 +64,8 @@ static struct platform_device zynq_cpuidle_device = {
*/
static void __init zynq_init_machine(void)
{
+ struct platform_device_info devinfo = { .name = "cpufreq-cpu0", };
+
/*
* 64KB way size, 8-way associativity, parity disabled
*/
@@ -72,6 +74,7 @@ static void __init zynq_init_machine(void)
of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
platform_device_register(&zynq_cpuidle_device);
+ platform_device_register_full(&devinfo);
}
static void __init zynq_timer_init(void)
diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index 6357710753d5..364d204298fa 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -123,15 +123,6 @@ config SYS_SUPPORTS_NUMA
config SYS_SUPPORTS_PCI
bool
-config SYS_SUPPORTS_CMT
- bool
-
-config SYS_SUPPORTS_MTU2
- bool
-
-config SYS_SUPPORTS_TMU
- bool
-
config STACKTRACE_SUPPORT
def_bool y
@@ -191,14 +182,14 @@ config CPU_SH3
bool
select CPU_HAS_INTEVT
select CPU_HAS_SR_RB
- select SYS_SUPPORTS_TMU
+ select SYS_SUPPORTS_SH_TMU
config CPU_SH4
bool
select CPU_HAS_INTEVT
select CPU_HAS_SR_RB
select CPU_HAS_FPU if !CPU_SH4AL_DSP
- select SYS_SUPPORTS_TMU
+ select SYS_SUPPORTS_SH_TMU
select SYS_SUPPORTS_HUGETLBFS if MMU
config CPU_SH4A
@@ -213,7 +204,7 @@ config CPU_SH4AL_DSP
config CPU_SH5
bool
select CPU_HAS_FPU
- select SYS_SUPPORTS_TMU
+ select SYS_SUPPORTS_SH_TMU
select SYS_SUPPORTS_HUGETLBFS if MMU
config CPU_SHX2
@@ -250,7 +241,7 @@ choice
config CPU_SUBTYPE_SH7619
bool "Support SH7619 processor"
select CPU_SH2
- select SYS_SUPPORTS_CMT
+ select SYS_SUPPORTS_SH_CMT
# SH-2A Processor Support
@@ -258,50 +249,50 @@ config CPU_SUBTYPE_SH7201
bool "Support SH7201 processor"
select CPU_SH2A
select CPU_HAS_FPU
- select SYS_SUPPORTS_MTU2
+ select SYS_SUPPORTS_SH_MTU2
config CPU_SUBTYPE_SH7203
bool "Support SH7203 processor"
select CPU_SH2A
select CPU_HAS_FPU
- select SYS_SUPPORTS_CMT
- select SYS_SUPPORTS_MTU2
+ select SYS_SUPPORTS_SH_CMT
+ select SYS_SUPPORTS_SH_MTU2
select ARCH_WANT_OPTIONAL_GPIOLIB
select PINCTRL
config CPU_SUBTYPE_SH7206
bool "Support SH7206 processor"
select CPU_SH2A
- select SYS_SUPPORTS_CMT
- select SYS_SUPPORTS_MTU2
+ select SYS_SUPPORTS_SH_CMT
+ select SYS_SUPPORTS_SH_MTU2
config CPU_SUBTYPE_SH7263
bool "Support SH7263 processor"
select CPU_SH2A
select CPU_HAS_FPU
- select SYS_SUPPORTS_CMT
- select SYS_SUPPORTS_MTU2
+ select SYS_SUPPORTS_SH_CMT
+ select SYS_SUPPORTS_SH_MTU2
config CPU_SUBTYPE_SH7264
bool "Support SH7264 processor"
select CPU_SH2A
select CPU_HAS_FPU
- select SYS_SUPPORTS_CMT
- select SYS_SUPPORTS_MTU2
+ select SYS_SUPPORTS_SH_CMT
+ select SYS_SUPPORTS_SH_MTU2
select PINCTRL
config CPU_SUBTYPE_SH7269
bool "Support SH7269 processor"
select CPU_SH2A
select CPU_HAS_FPU
- select SYS_SUPPORTS_CMT
- select SYS_SUPPORTS_MTU2
+ select SYS_SUPPORTS_SH_CMT
+ select SYS_SUPPORTS_SH_MTU2
select PINCTRL
config CPU_SUBTYPE_MXG
bool "Support MX-G processor"
select CPU_SH2A
- select SYS_SUPPORTS_MTU2
+ select SYS_SUPPORTS_SH_MTU2
help
Select MX-G if running on an R8A03022BG part.
@@ -354,7 +345,7 @@ config CPU_SUBTYPE_SH7720
bool "Support SH7720 processor"
select CPU_SH3
select CPU_HAS_DSP
- select SYS_SUPPORTS_CMT
+ select SYS_SUPPORTS_SH_CMT
select ARCH_WANT_OPTIONAL_GPIOLIB
select USB_ARCH_HAS_OHCI
select USB_OHCI_SH if USB_OHCI_HCD
@@ -366,7 +357,7 @@ config CPU_SUBTYPE_SH7721
bool "Support SH7721 processor"
select CPU_SH3
select CPU_HAS_DSP
- select SYS_SUPPORTS_CMT
+ select SYS_SUPPORTS_SH_CMT
select USB_ARCH_HAS_OHCI
select USB_OHCI_SH if USB_OHCI_HCD
help
@@ -422,7 +413,7 @@ config CPU_SUBTYPE_SH7723
select CPU_SHX2
select ARCH_SHMOBILE
select ARCH_SPARSEMEM_ENABLE
- select SYS_SUPPORTS_CMT
+ select SYS_SUPPORTS_SH_CMT
select ARCH_WANT_OPTIONAL_GPIOLIB
select PINCTRL
help
@@ -434,7 +425,7 @@ config CPU_SUBTYPE_SH7724
select CPU_SHX2
select ARCH_SHMOBILE
select ARCH_SPARSEMEM_ENABLE
- select SYS_SUPPORTS_CMT
+ select SYS_SUPPORTS_SH_CMT
select ARCH_WANT_OPTIONAL_GPIOLIB
select PINCTRL
help
@@ -514,7 +505,7 @@ config CPU_SUBTYPE_SH7343
bool "Support SH7343 processor"
select CPU_SH4AL_DSP
select ARCH_SHMOBILE
- select SYS_SUPPORTS_CMT
+ select SYS_SUPPORTS_SH_CMT
config CPU_SUBTYPE_SH7722
bool "Support SH7722 processor"
@@ -523,7 +514,7 @@ config CPU_SUBTYPE_SH7722
select ARCH_SHMOBILE
select ARCH_SPARSEMEM_ENABLE
select SYS_SUPPORTS_NUMA
- select SYS_SUPPORTS_CMT
+ select SYS_SUPPORTS_SH_CMT
select ARCH_WANT_OPTIONAL_GPIOLIB
select PINCTRL
@@ -534,7 +525,7 @@ config CPU_SUBTYPE_SH7366
select ARCH_SHMOBILE
select ARCH_SPARSEMEM_ENABLE
select SYS_SUPPORTS_NUMA
- select SYS_SUPPORTS_CMT
+ select SYS_SUPPORTS_SH_CMT
endchoice
@@ -567,27 +558,6 @@ source "arch/sh/boards/Kconfig"
menu "Timer and clock configuration"
-config SH_TIMER_TMU
- bool "TMU timer driver"
- depends on SYS_SUPPORTS_TMU
- default y
- help
- This enables the build of the TMU timer driver.
-
-config SH_TIMER_CMT
- bool "CMT timer driver"
- depends on SYS_SUPPORTS_CMT
- default y
- help
- This enables build of the CMT timer driver.
-
-config SH_TIMER_MTU2
- bool "MTU2 timer driver"
- depends on SYS_SUPPORTS_MTU2
- default y
- help
- This enables build of the MTU2 timer driver.
-
config SH_PCLK_FREQ
int "Peripheral clock frequency (in Hz)"
depends on SH_CLK_CPG_LEGACY
diff --git a/arch/x86/kernel/hpet.c b/arch/x86/kernel/hpet.c
index da85a8e830a1..b91abfdd4931 100644
--- a/arch/x86/kernel/hpet.c
+++ b/arch/x86/kernel/hpet.c
@@ -699,7 +699,7 @@ static int hpet_cpuhp_notify(struct notifier_block *n,
/* FIXME: add schedule_work_on() */
schedule_delayed_work_on(cpu, &work.work, 0);
wait_for_completion(&work.complete);
- destroy_timer_on_stack(&work.work.timer);
+ destroy_delayed_work_on_stack(&work.work);
break;
case CPU_DEAD:
if (hdev) {
diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
index cd6950fd8caf..52e9329e3c51 100644
--- a/drivers/clocksource/Kconfig
+++ b/drivers/clocksource/Kconfig
@@ -140,3 +140,51 @@ config VF_PIT_TIMER
bool
help
Support for Period Interrupt Timer on Freescale Vybrid Family SoCs.
+
+config SYS_SUPPORTS_SH_CMT
+ bool
+
+config SYS_SUPPORTS_SH_MTU2
+ bool
+
+config SYS_SUPPORTS_SH_TMU
+ bool
+
+config SYS_SUPPORTS_EM_STI
+ bool
+
+config SH_TIMER_CMT
+ bool "Renesas CMT timer driver" if COMPILE_TEST
+ depends on GENERIC_CLOCKEVENTS
+ default SYS_SUPPORTS_SH_CMT
+ help
+ This enables build of a clocksource and clockevent driver for
+ the Compare Match Timer (CMT) hardware available in 16/32/48-bit
+ variants on a wide range of Mobile and Automotive SoCs from Renesas.
+
+config SH_TIMER_MTU2
+ bool "Renesas MTU2 timer driver" if COMPILE_TEST
+ depends on GENERIC_CLOCKEVENTS
+ default SYS_SUPPORTS_SH_MTU2
+ help
+ This enables build of a clockevent driver for the Multi-Function
+ Timer Pulse Unit 2 (TMU2) hardware available on SoCs from Renesas.
+ This hardware comes with 16 bit-timer registers.
+
+config SH_TIMER_TMU
+ bool "Renesas TMU timer driver" if COMPILE_TEST
+ depends on GENERIC_CLOCKEVENTS
+ default SYS_SUPPORTS_SH_TMU
+ help
+ This enables build of a clocksource and clockevent driver for
+ the 32-bit Timer Unit (TMU) hardware available on a wide range
+ SoCs from Renesas.
+
+config EM_TIMER_STI
+ bool "Renesas STI timer driver" if COMPILE_TEST
+ depends on GENERIC_CLOCKEVENTS
+ default SYS_SUPPORTS_EM_STI
+ help
+ This enables build of a clocksource and clockevent driver for
+ the 48-bit System Timer (STI) hardware available on a SoCs
+ such as EMEV2 from former NEC Electronics.
diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile
index c7ca50a9c232..aed3488d9426 100644
--- a/drivers/clocksource/Makefile
+++ b/drivers/clocksource/Makefile
@@ -21,6 +21,7 @@ obj-$(CONFIG_ARCH_MARCO) += timer-marco.o
obj-$(CONFIG_ARCH_MOXART) += moxart_timer.o
obj-$(CONFIG_ARCH_MXS) += mxs_timer.o
obj-$(CONFIG_ARCH_PRIMA2) += timer-prima2.o
+obj-$(CONFIG_ARCH_U300) += timer-u300.o
obj-$(CONFIG_SUN4I_TIMER) += sun4i_timer.o
obj-$(CONFIG_SUN5I_HSTIMER) += timer-sun5i.o
obj-$(CONFIG_ARCH_TEGRA) += tegra20_timer.o
@@ -37,3 +38,4 @@ obj-$(CONFIG_ARM_ARCH_TIMER) += arm_arch_timer.o
obj-$(CONFIG_ARM_GLOBAL_TIMER) += arm_global_timer.o
obj-$(CONFIG_CLKSRC_METAG_GENERIC) += metag_generic.o
obj-$(CONFIG_ARCH_HAS_TICK_BROADCAST) += dummy_timer.o
+obj-$(CONFIG_ARCH_KEYSTONE) += timer-keystone.o
diff --git a/drivers/clocksource/arm_arch_timer.c b/drivers/clocksource/arm_arch_timer.c
index 95fb944e15ee..57e823c44d2a 100644
--- a/drivers/clocksource/arm_arch_timer.c
+++ b/drivers/clocksource/arm_arch_timer.c
@@ -277,6 +277,7 @@ static void __arch_timer_setup(unsigned type,
clk->set_next_event = arch_timer_set_next_event_phys;
}
} else {
+ clk->features |= CLOCK_EVT_FEAT_DYNIRQ;
clk->name = "arch_mem_timer";
clk->rating = 400;
clk->cpumask = cpu_all_mask;
diff --git a/drivers/clocksource/cadence_ttc_timer.c b/drivers/clocksource/cadence_ttc_timer.c
index 63f176de0d02..49fbe2847c84 100644
--- a/drivers/clocksource/cadence_ttc_timer.c
+++ b/drivers/clocksource/cadence_ttc_timer.c
@@ -16,6 +16,7 @@
*/
#include <linux/clk.h>
+#include <linux/clk-provider.h>
#include <linux/interrupt.h>
#include <linux/clockchips.h>
#include <linux/of_address.h>
@@ -52,6 +53,8 @@
#define TTC_CNT_CNTRL_DISABLE_MASK 0x1
#define TTC_CLK_CNTRL_CSRC_MASK (1 << 5) /* clock source */
+#define TTC_CLK_CNTRL_PSV_MASK 0x1e
+#define TTC_CLK_CNTRL_PSV_SHIFT 1
/*
* Setup the timers to use pre-scaling, using a fixed value for now that will
@@ -63,6 +66,8 @@
#define CLK_CNTRL_PRESCALE_EN 1
#define CNT_CNTRL_RESET (1 << 4)
+#define MAX_F_ERR 50
+
/**
* struct ttc_timer - This definition defines local timer structure
*
@@ -82,6 +87,8 @@ struct ttc_timer {
container_of(x, struct ttc_timer, clk_rate_change_nb)
struct ttc_timer_clocksource {
+ u32 scale_clk_ctrl_reg_old;
+ u32 scale_clk_ctrl_reg_new;
struct ttc_timer ttc;
struct clocksource cs;
};
@@ -229,32 +236,89 @@ static int ttc_rate_change_clocksource_cb(struct notifier_block *nb,
struct ttc_timer_clocksource, ttc);
switch (event) {
- case POST_RATE_CHANGE:
+ case PRE_RATE_CHANGE:
+ {
+ u32 psv;
+ unsigned long factor, rate_low, rate_high;
+
+ if (ndata->new_rate > ndata->old_rate) {
+ factor = DIV_ROUND_CLOSEST(ndata->new_rate,
+ ndata->old_rate);
+ rate_low = ndata->old_rate;
+ rate_high = ndata->new_rate;
+ } else {
+ factor = DIV_ROUND_CLOSEST(ndata->old_rate,
+ ndata->new_rate);
+ rate_low = ndata->new_rate;
+ rate_high = ndata->old_rate;
+ }
+
+ if (!is_power_of_2(factor))
+ return NOTIFY_BAD;
+
+ if (abs(rate_high - (factor * rate_low)) > MAX_F_ERR)
+ return NOTIFY_BAD;
+
+ factor = __ilog2_u32(factor);
+
/*
- * Do whatever is necessary to maintain a proper time base
- *
- * I cannot find a way to adjust the currently used clocksource
- * to the new frequency. __clocksource_updatefreq_hz() sounds
- * good, but does not work. Not sure what's that missing.
- *
- * This approach works, but triggers two clocksource switches.
- * The first after unregister to clocksource jiffies. And
- * another one after the register to the newly registered timer.
- *
- * Alternatively we could 'waste' another HW timer to ping pong
- * between clock sources. That would also use one register and
- * one unregister call, but only trigger one clocksource switch
- * for the cost of another HW timer used by the OS.
+ * store timer clock ctrl register so we can restore it in case
+ * of an abort.
*/
- clocksource_unregister(&ttccs->cs);
- clocksource_register_hz(&ttccs->cs,
- ndata->new_rate / PRESCALE);
- /* fall through */
- case PRE_RATE_CHANGE:
+ ttccs->scale_clk_ctrl_reg_old =
+ __raw_readl(ttccs->ttc.base_addr +
+ TTC_CLK_CNTRL_OFFSET);
+
+ psv = (ttccs->scale_clk_ctrl_reg_old &
+ TTC_CLK_CNTRL_PSV_MASK) >>
+ TTC_CLK_CNTRL_PSV_SHIFT;
+ if (ndata->new_rate < ndata->old_rate)
+ psv -= factor;
+ else
+ psv += factor;
+
+ /* prescaler within legal range? */
+ if (psv & ~(TTC_CLK_CNTRL_PSV_MASK >> TTC_CLK_CNTRL_PSV_SHIFT))
+ return NOTIFY_BAD;
+
+ ttccs->scale_clk_ctrl_reg_new = ttccs->scale_clk_ctrl_reg_old &
+ ~TTC_CLK_CNTRL_PSV_MASK;
+ ttccs->scale_clk_ctrl_reg_new |= psv << TTC_CLK_CNTRL_PSV_SHIFT;
+
+
+ /* scale down: adjust divider in post-change notification */
+ if (ndata->new_rate < ndata->old_rate)
+ return NOTIFY_DONE;
+
+ /* scale up: adjust divider now - before frequency change */
+ __raw_writel(ttccs->scale_clk_ctrl_reg_new,
+ ttccs->ttc.base_addr + TTC_CLK_CNTRL_OFFSET);
+ break;
+ }
+ case POST_RATE_CHANGE:
+ /* scale up: pre-change notification did the adjustment */
+ if (ndata->new_rate > ndata->old_rate)
+ return NOTIFY_OK;
+
+ /* scale down: adjust divider now - after frequency change */
+ __raw_writel(ttccs->scale_clk_ctrl_reg_new,
+ ttccs->ttc.base_addr + TTC_CLK_CNTRL_OFFSET);
+ break;
+
case ABORT_RATE_CHANGE:
+ /* we have to undo the adjustment in case we scale up */
+ if (ndata->new_rate < ndata->old_rate)
+ return NOTIFY_OK;
+
+ /* restore original register value */
+ __raw_writel(ttccs->scale_clk_ctrl_reg_old,
+ ttccs->ttc.base_addr + TTC_CLK_CNTRL_OFFSET);
+ /* fall through */
default:
return NOTIFY_DONE;
}
+
+ return NOTIFY_DONE;
}
static void __init ttc_setup_clocksource(struct clk *clk, void __iomem *base)
@@ -321,25 +385,12 @@ static int ttc_rate_change_clockevent_cb(struct notifier_block *nb,
switch (event) {
case POST_RATE_CHANGE:
- {
- unsigned long flags;
-
- /*
- * clockevents_update_freq should be called with IRQ disabled on
- * the CPU the timer provides events for. The timer we use is
- * common to both CPUs, not sure if we need to run on both
- * cores.
- */
- local_irq_save(flags);
- clockevents_update_freq(&ttcce->ce,
- ndata->new_rate / PRESCALE);
- local_irq_restore(flags);
-
/* update cached frequency */
ttc->freq = ndata->new_rate;
+ clockevents_update_freq(&ttcce->ce, ndata->new_rate / PRESCALE);
+
/* fall through */
- }
case PRE_RATE_CHANGE:
case ABORT_RATE_CHANGE:
default:
diff --git a/drivers/clocksource/exynos_mct.c b/drivers/clocksource/exynos_mct.c
index 48f76bc05da0..c2e390efbdca 100644
--- a/drivers/clocksource/exynos_mct.c
+++ b/drivers/clocksource/exynos_mct.c
@@ -410,7 +410,7 @@ static int exynos4_local_timer_setup(struct clock_event_device *evt)
mevt = container_of(evt, struct mct_clock_event_device, evt);
mevt->base = EXYNOS4_MCT_L_BASE(cpu);
- sprintf(mevt->name, "mct_tick%d", cpu);
+ snprintf(mevt->name, sizeof(mevt->name), "mct_tick%d", cpu);
evt->name = mevt->name;
evt->cpumask = cpumask_of(cpu);
diff --git a/drivers/clocksource/sun4i_timer.c b/drivers/clocksource/sun4i_timer.c
index bf497afba9ad..efb17c3ee120 100644
--- a/drivers/clocksource/sun4i_timer.c
+++ b/drivers/clocksource/sun4i_timer.c
@@ -196,5 +196,5 @@ static void __init sun4i_timer_init(struct device_node *node)
clockevents_config_and_register(&sun4i_clockevent, rate,
TIMER_SYNC_TICKS, 0xffffffff);
}
-CLOCKSOURCE_OF_DECLARE(sun4i, "allwinner,sun4i-timer",
+CLOCKSOURCE_OF_DECLARE(sun4i, "allwinner,sun4i-a10-timer",
sun4i_timer_init);
diff --git a/drivers/clocksource/time-armada-370-xp.c b/drivers/clocksource/time-armada-370-xp.c
index ee8691b89944..0451e62fac7a 100644
--- a/drivers/clocksource/time-armada-370-xp.c
+++ b/drivers/clocksource/time-armada-370-xp.c
@@ -85,12 +85,6 @@ static u32 ticks_per_jiffy;
static struct clock_event_device __percpu *armada_370_xp_evt;
-static void timer_ctrl_clrset(u32 clr, u32 set)
-{
- writel((readl(timer_base + TIMER_CTRL_OFF) & ~clr) | set,
- timer_base + TIMER_CTRL_OFF);
-}
-
static void local_timer_ctrl_clrset(u32 clr, u32 set)
{
writel((readl(local_base + TIMER_CTRL_OFF) & ~clr) | set,
@@ -245,7 +239,7 @@ static void __init armada_370_xp_timer_common_init(struct device_node *np)
clr = TIMER0_25MHZ;
enable_mask = TIMER0_EN | TIMER0_DIV(TIMER_DIVIDER_SHIFT);
}
- timer_ctrl_clrset(clr, set);
+ atomic_io_modify(timer_base + TIMER_CTRL_OFF, clr | set, set);
local_timer_ctrl_clrset(clr, set);
/*
@@ -263,7 +257,9 @@ static void __init armada_370_xp_timer_common_init(struct device_node *np)
writel(0xffffffff, timer_base + TIMER0_VAL_OFF);
writel(0xffffffff, timer_base + TIMER0_RELOAD_OFF);
- timer_ctrl_clrset(0, TIMER0_RELOAD_EN | enable_mask);
+ atomic_io_modify(timer_base + TIMER_CTRL_OFF,
+ TIMER0_RELOAD_EN | enable_mask,
+ TIMER0_RELOAD_EN | enable_mask);
/*
* Set scale and timer for sched_clock.
diff --git a/drivers/clocksource/time-orion.c b/drivers/clocksource/time-orion.c
index 20066222f3f2..0b3ce0399c51 100644
--- a/drivers/clocksource/time-orion.c
+++ b/drivers/clocksource/time-orion.c
@@ -35,20 +35,6 @@
#define ORION_ONESHOT_MAX 0xfffffffe
static void __iomem *timer_base;
-static DEFINE_SPINLOCK(timer_ctrl_lock);
-
-/*
- * Thread-safe access to TIMER_CTRL register
- * (shared with watchdog timer)
- */
-void orion_timer_ctrl_clrset(u32 clr, u32 set)
-{
- spin_lock(&timer_ctrl_lock);
- writel((readl(timer_base + TIMER_CTRL) & ~clr) | set,
- timer_base + TIMER_CTRL);
- spin_unlock(&timer_ctrl_lock);
-}
-EXPORT_SYMBOL(orion_timer_ctrl_clrset);
/*
* Free-running clocksource handling.
@@ -68,7 +54,8 @@ static int orion_clkevt_next_event(unsigned long delta,
{
/* setup and enable one-shot timer */
writel(delta, timer_base + TIMER1_VAL);
- orion_timer_ctrl_clrset(TIMER1_RELOAD_EN, TIMER1_EN);
+ atomic_io_modify(timer_base + TIMER_CTRL,
+ TIMER1_RELOAD_EN | TIMER1_EN, TIMER1_EN);
return 0;
}
@@ -80,10 +67,13 @@ static void orion_clkevt_mode(enum clock_event_mode mode,
/* setup and enable periodic timer at 1/HZ intervals */
writel(ticks_per_jiffy - 1, timer_base + TIMER1_RELOAD);
writel(ticks_per_jiffy - 1, timer_base + TIMER1_VAL);
- orion_timer_ctrl_clrset(0, TIMER1_RELOAD_EN | TIMER1_EN);
+ atomic_io_modify(timer_base + TIMER_CTRL,
+ TIMER1_RELOAD_EN | TIMER1_EN,
+ TIMER1_RELOAD_EN | TIMER1_EN);
} else {
/* disable timer */
- orion_timer_ctrl_clrset(TIMER1_RELOAD_EN | TIMER1_EN, 0);
+ atomic_io_modify(timer_base + TIMER_CTRL,
+ TIMER1_RELOAD_EN | TIMER1_EN, 0);
}
}
@@ -131,7 +121,9 @@ static void __init orion_timer_init(struct device_node *np)
/* setup timer0 as free-running clocksource */
writel(~0, timer_base + TIMER0_VAL);
writel(~0, timer_base + TIMER0_RELOAD);
- orion_timer_ctrl_clrset(0, TIMER0_RELOAD_EN | TIMER0_EN);
+ atomic_io_modify(timer_base + TIMER_CTRL,
+ TIMER0_RELOAD_EN | TIMER0_EN,
+ TIMER0_RELOAD_EN | TIMER0_EN);
clocksource_mmio_init(timer_base + TIMER0_VAL, "orion_clocksource",
clk_get_rate(clk), 300, 32,
clocksource_mmio_readl_down);
diff --git a/drivers/clocksource/timer-keystone.c b/drivers/clocksource/timer-keystone.c
new file mode 100644
index 000000000000..0250354f7e55
--- /dev/null
+++ b/drivers/clocksource/timer-keystone.c
@@ -0,0 +1,241 @@
+/*
+ * Keystone broadcast clock-event
+ *
+ * Copyright 2013 Texas Instruments, Inc.
+ *
+ * Author: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/clk.h>
+#include <linux/clockchips.h>
+#include <linux/clocksource.h>
+#include <linux/interrupt.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+
+#define TIMER_NAME "timer-keystone"
+
+/* Timer register offsets */
+#define TIM12 0x10
+#define TIM34 0x14
+#define PRD12 0x18
+#define PRD34 0x1c
+#define TCR 0x20
+#define TGCR 0x24
+#define INTCTLSTAT 0x44
+
+/* Timer register bitfields */
+#define TCR_ENAMODE_MASK 0xC0
+#define TCR_ENAMODE_ONESHOT_MASK 0x40
+#define TCR_ENAMODE_PERIODIC_MASK 0x80
+
+#define TGCR_TIM_UNRESET_MASK 0x03
+#define INTCTLSTAT_ENINT_MASK 0x01
+
+/**
+ * struct keystone_timer: holds timer's data
+ * @base: timer memory base address
+ * @hz_period: cycles per HZ period
+ * @event_dev: event device based on timer
+ */
+static struct keystone_timer {
+ void __iomem *base;
+ unsigned long hz_period;
+ struct clock_event_device event_dev;
+} timer;
+
+static inline u32 keystone_timer_readl(unsigned long rg)
+{
+ return readl_relaxed(timer.base + rg);
+}
+
+static inline void keystone_timer_writel(u32 val, unsigned long rg)
+{
+ writel_relaxed(val, timer.base + rg);
+}
+
+/**
+ * keystone_timer_barrier: write memory barrier
+ * use explicit barrier to avoid using readl/writel non relaxed function
+ * variants, because in our case non relaxed variants hide the true places
+ * where barrier is needed.
+ */
+static inline void keystone_timer_barrier(void)
+{
+ __iowmb();
+}
+
+/**
+ * keystone_timer_config: configures timer to work in oneshot/periodic modes.
+ * @ mode: mode to configure
+ * @ period: cycles number to configure for
+ */
+static int keystone_timer_config(u64 period, enum clock_event_mode mode)
+{
+ u32 tcr;
+ u32 off;
+
+ tcr = keystone_timer_readl(TCR);
+ off = tcr & ~(TCR_ENAMODE_MASK);
+
+ /* set enable mode */
+ switch (mode) {
+ case CLOCK_EVT_MODE_ONESHOT:
+ tcr |= TCR_ENAMODE_ONESHOT_MASK;
+ break;
+ case CLOCK_EVT_MODE_PERIODIC:
+ tcr |= TCR_ENAMODE_PERIODIC_MASK;
+ break;
+ default:
+ return -1;
+ }
+
+ /* disable timer */
+ keystone_timer_writel(off, TCR);
+ /* here we have to be sure the timer has been disabled */
+ keystone_timer_barrier();
+
+ /* reset counter to zero, set new period */
+ keystone_timer_writel(0, TIM12);
+ keystone_timer_writel(0, TIM34);
+ keystone_timer_writel(period & 0xffffffff, PRD12);
+ keystone_timer_writel(period >> 32, PRD34);
+
+ /*
+ * enable timer
+ * here we have to be sure that CNTLO, CNTHI, PRDLO, PRDHI registers
+ * have been written.
+ */
+ keystone_timer_barrier();
+ keystone_timer_writel(tcr, TCR);
+ return 0;
+}
+
+static void keystone_timer_disable(void)
+{
+ u32 tcr;
+
+ tcr = keystone_timer_readl(TCR);
+
+ /* disable timer */
+ tcr &= ~(TCR_ENAMODE_MASK);
+ keystone_timer_writel(tcr, TCR);
+}
+
+static irqreturn_t keystone_timer_interrupt(int irq, void *dev_id)
+{
+ struct clock_event_device *evt = dev_id;
+
+ evt->event_handler(evt);
+ return IRQ_HANDLED;
+}
+
+static int keystone_set_next_event(unsigned long cycles,
+ struct clock_event_device *evt)
+{
+ return keystone_timer_config(cycles, evt->mode);
+}
+
+static void keystone_set_mode(enum clock_event_mode mode,
+ struct clock_event_device *evt)
+{
+ switch (mode) {
+ case CLOCK_EVT_MODE_PERIODIC:
+ keystone_timer_config(timer.hz_period, CLOCK_EVT_MODE_PERIODIC);
+ break;
+ case CLOCK_EVT_MODE_UNUSED:
+ case CLOCK_EVT_MODE_SHUTDOWN:
+ case CLOCK_EVT_MODE_ONESHOT:
+ keystone_timer_disable();
+ break;
+ default:
+ break;
+ }
+}
+
+static void __init keystone_timer_init(struct device_node *np)
+{
+ struct clock_event_device *event_dev = &timer.event_dev;
+ unsigned long rate;
+ struct clk *clk;
+ int irq, error;
+
+ irq = irq_of_parse_and_map(np, 0);
+ if (irq == NO_IRQ) {
+ pr_err("%s: failed to map interrupts\n", __func__);
+ return;
+ }
+
+ timer.base = of_iomap(np, 0);
+ if (!timer.base) {
+ pr_err("%s: failed to map registers\n", __func__);
+ return;
+ }
+
+ clk = of_clk_get(np, 0);
+ if (IS_ERR(clk)) {
+ pr_err("%s: failed to get clock\n", __func__);
+ iounmap(timer.base);
+ return;
+ }
+
+ error = clk_prepare_enable(clk);
+ if (error) {
+ pr_err("%s: failed to enable clock\n", __func__);
+ goto err;
+ }
+
+ rate = clk_get_rate(clk);
+
+ /* disable, use internal clock source */
+ keystone_timer_writel(0, TCR);
+ /* here we have to be sure the timer has been disabled */
+ keystone_timer_barrier();
+
+ /* reset timer as 64-bit, no pre-scaler, plus features are disabled */
+ keystone_timer_writel(0, TGCR);
+
+ /* unreset timer */
+ keystone_timer_writel(TGCR_TIM_UNRESET_MASK, TGCR);
+
+ /* init counter to zero */
+ keystone_timer_writel(0, TIM12);
+ keystone_timer_writel(0, TIM34);
+
+ timer.hz_period = DIV_ROUND_UP(rate, HZ);
+
+ /* enable timer interrupts */
+ keystone_timer_writel(INTCTLSTAT_ENINT_MASK, INTCTLSTAT);
+
+ error = request_irq(irq, keystone_timer_interrupt, IRQF_TIMER,
+ TIMER_NAME, event_dev);
+ if (error) {
+ pr_err("%s: failed to setup irq\n", __func__);
+ goto err;
+ }
+
+ /* setup clockevent */
+ event_dev->features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT;
+ event_dev->set_next_event = keystone_set_next_event;
+ event_dev->set_mode = keystone_set_mode;
+ event_dev->cpumask = cpu_all_mask;
+ event_dev->owner = THIS_MODULE;
+ event_dev->name = TIMER_NAME;
+ event_dev->irq = irq;
+
+ clockevents_config_and_register(event_dev, rate, 1, ULONG_MAX);
+
+ pr_info("keystone timer clock @%lu Hz\n", rate);
+ return;
+err:
+ clk_put(clk);
+ iounmap(timer.base);
+}
+
+CLOCKSOURCE_OF_DECLARE(keystone_timer, "ti,keystone-timer",
+ keystone_timer_init);
diff --git a/arch/arm/mach-u300/timer.c b/drivers/clocksource/timer-u300.c
index fe08fd34c0ce..e63d469661fd 100644
--- a/arch/arm/mach-u300/timer.c
+++ b/drivers/clocksource/timer-u300.c
@@ -1,8 +1,4 @@
/*
- *
- * arch/arm/mach-u300/timer.c
- *
- *
* Copyright (C) 2007-2009 ST-Ericsson AB
* License terms: GNU General Public License (GPL) version 2
* Timer COH 901 328, runs the OS timer interrupt.
diff --git a/drivers/cpuidle/cpuidle.c b/drivers/cpuidle/cpuidle.c
index a55e68f2cfc8..09d05ab262be 100644
--- a/drivers/cpuidle/cpuidle.c
+++ b/drivers/cpuidle/cpuidle.c
@@ -140,12 +140,14 @@ int cpuidle_idle_call(void)
return 0;
}
- trace_cpu_idle_rcuidle(next_state, dev->cpu);
-
broadcast = !!(drv->states[next_state].flags & CPUIDLE_FLAG_TIMER_STOP);
- if (broadcast)
- clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_ENTER, &dev->cpu);
+ if (broadcast &&
+ clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_ENTER, &dev->cpu))
+ return -EBUSY;
+
+
+ trace_cpu_idle_rcuidle(next_state, dev->cpu);
if (cpuidle_state_is_coupled(dev, drv, next_state))
entered_state = cpuidle_enter_state_coupled(dev, drv,
@@ -153,11 +155,11 @@ int cpuidle_idle_call(void)
else
entered_state = cpuidle_enter_state(dev, drv, next_state);
+ trace_cpu_idle_rcuidle(PWR_EVENT_EXIT, dev->cpu);
+
if (broadcast)
clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_EXIT, &dev->cpu);
- trace_cpu_idle_rcuidle(PWR_EVENT_EXIT, dev->cpu);
-
/* give the governor an opportunity to reflect on the outcome */
if (cpuidle_curr_governor->reflect)
cpuidle_curr_governor->reflect(dev, entered_state);
diff --git a/fs/timerfd.c b/fs/timerfd.c
index 929312180dd0..0013142c0475 100644
--- a/fs/timerfd.c
+++ b/fs/timerfd.c
@@ -317,6 +317,7 @@ SYSCALL_DEFINE2(timerfd_create, int, clockid, int, flags)
(clockid != CLOCK_MONOTONIC &&
clockid != CLOCK_REALTIME &&
clockid != CLOCK_REALTIME_ALARM &&
+ clockid != CLOCK_BOOTTIME &&
clockid != CLOCK_BOOTTIME_ALARM))
return -EINVAL;
diff --git a/include/linux/clockchips.h b/include/linux/clockchips.h
index 493aa021c7a9..2e4cb67f6e56 100644
--- a/include/linux/clockchips.h
+++ b/include/linux/clockchips.h
@@ -62,6 +62,11 @@ enum clock_event_mode {
#define CLOCK_EVT_FEAT_DYNIRQ 0x000020
#define CLOCK_EVT_FEAT_PERCPU 0x000040
+/*
+ * Clockevent device is based on a hrtimer for broadcast
+ */
+#define CLOCK_EVT_FEAT_HRTIMER 0x000080
+
/**
* struct clock_event_device - clock event device descriptor
* @event_handler: Assigned by the framework to be called by the low
@@ -83,6 +88,7 @@ enum clock_event_mode {
* @name: ptr to clock event name
* @rating: variable to rate clock event devices
* @irq: IRQ number (only for non CPU local devices)
+ * @bound_on: Bound on CPU
* @cpumask: cpumask to indicate for which CPUs this device works
* @list: list head for the management code
* @owner: module reference
@@ -113,6 +119,7 @@ struct clock_event_device {
const char *name;
int rating;
int irq;
+ int bound_on;
const struct cpumask *cpumask;
struct list_head list;
struct module *owner;
@@ -180,15 +187,17 @@ extern int tick_receive_broadcast(void);
#endif
#if defined(CONFIG_GENERIC_CLOCKEVENTS_BROADCAST) && defined(CONFIG_TICK_ONESHOT)
+extern void tick_setup_hrtimer_broadcast(void);
extern int tick_check_broadcast_expired(void);
#else
static inline int tick_check_broadcast_expired(void) { return 0; }
+static inline void tick_setup_hrtimer_broadcast(void) {};
#endif
#ifdef CONFIG_GENERIC_CLOCKEVENTS
-extern void clockevents_notify(unsigned long reason, void *arg);
+extern int clockevents_notify(unsigned long reason, void *arg);
#else
-static inline void clockevents_notify(unsigned long reason, void *arg) {}
+static inline int clockevents_notify(unsigned long reason, void *arg) { return 0; }
#endif
#else /* CONFIG_GENERIC_CLOCKEVENTS_BUILD */
@@ -196,8 +205,9 @@ static inline void clockevents_notify(unsigned long reason, void *arg) {}
static inline void clockevents_suspend(void) {}
static inline void clockevents_resume(void) {}
-static inline void clockevents_notify(unsigned long reason, void *arg) {}
+static inline int clockevents_notify(unsigned long reason, void *arg) { return 0; }
static inline int tick_check_broadcast_expired(void) { return 0; }
+static inline void tick_setup_hrtimer_broadcast(void) {};
#endif
diff --git a/include/linux/hrtimer.h b/include/linux/hrtimer.h
index d19a5c2d2270..e7a8d3fa91d5 100644
--- a/include/linux/hrtimer.h
+++ b/include/linux/hrtimer.h
@@ -96,12 +96,12 @@ enum hrtimer_restart {
* @function: timer expiry callback function
* @base: pointer to the timer base (per cpu and per clock)
* @state: state information (See bit values above)
+ * @start_pid: timer statistics field to store the pid of the task which
+ * started the timer
* @start_site: timer statistics field to store the site where the timer
* was started
* @start_comm: timer statistics field to store the name of the process which
* started the timer
- * @start_pid: timer statistics field to store the pid of the task which
- * started the timer
*
* The hrtimer structure must be initialized by hrtimer_init()
*/
diff --git a/include/linux/sched.h b/include/linux/sched.h
index c399ed826648..7cb07fd26680 100644
--- a/include/linux/sched.h
+++ b/include/linux/sched.h
@@ -294,10 +294,14 @@ extern int runqueue_is_locked(int cpu);
#if defined(CONFIG_SMP) && defined(CONFIG_NO_HZ_COMMON)
extern void nohz_balance_enter_idle(int cpu);
extern void set_cpu_sd_state_idle(void);
-extern int get_nohz_timer_target(void);
+extern int get_nohz_timer_target(int pinned);
#else
static inline void nohz_balance_enter_idle(int cpu) { }
static inline void set_cpu_sd_state_idle(void) { }
+static inline int get_nohz_timer_target(int pinned)
+{
+ return smp_processor_id();
+}
#endif
/*
diff --git a/include/linux/workqueue.h b/include/linux/workqueue.h
index 532994651684..1b22c42e9c2d 100644
--- a/include/linux/workqueue.h
+++ b/include/linux/workqueue.h
@@ -180,6 +180,7 @@ struct execute_work {
#ifdef CONFIG_DEBUG_OBJECTS_WORK
extern void __init_work(struct work_struct *work, int onstack);
extern void destroy_work_on_stack(struct work_struct *work);
+extern void destroy_delayed_work_on_stack(struct delayed_work *work);
static inline unsigned int work_static(struct work_struct *work)
{
return *work_data_bits(work) & WORK_STRUCT_STATIC;
@@ -187,6 +188,7 @@ static inline unsigned int work_static(struct work_struct *work)
#else
static inline void __init_work(struct work_struct *work, int onstack) { }
static inline void destroy_work_on_stack(struct work_struct *work) { }
+static inline void destroy_delayed_work_on_stack(struct delayed_work *work) { }
static inline unsigned int work_static(struct work_struct *work) { return 0; }
#endif
diff --git a/kernel/hrtimer.c b/kernel/hrtimer.c
index 09094361dce5..d55092ceee29 100644
--- a/kernel/hrtimer.c
+++ b/kernel/hrtimer.c
@@ -168,19 +168,6 @@ struct hrtimer_clock_base *lock_hrtimer_base(const struct hrtimer *timer,
}
}
-
-/*
- * Get the preferred target CPU for NOHZ
- */
-static int hrtimer_get_target(int this_cpu, int pinned)
-{
-#ifdef CONFIG_NO_HZ_COMMON
- if (!pinned && get_sysctl_timer_migration() && idle_cpu(this_cpu))
- return get_nohz_timer_target();
-#endif
- return this_cpu;
-}
-
/*
* With HIGHRES=y we do not migrate the timer when it is expiring
* before the next event on the target cpu because we cannot reprogram
@@ -214,7 +201,7 @@ switch_hrtimer_base(struct hrtimer *timer, struct hrtimer_clock_base *base,
struct hrtimer_clock_base *new_base;
struct hrtimer_cpu_base *new_cpu_base;
int this_cpu = smp_processor_id();
- int cpu = hrtimer_get_target(this_cpu, pinned);
+ int cpu = get_nohz_timer_target(pinned);
int basenum = base->index;
again:
diff --git a/kernel/sched/core.c b/kernel/sched/core.c
index d11a1768357d..3c4d096544ce 100644
--- a/kernel/sched/core.c
+++ b/kernel/sched/core.c
@@ -555,12 +555,15 @@ void resched_cpu(int cpu)
* selecting an idle cpu will add more delays to the timers than intended
* (as that cpu's timer base may not be uptodate wrt jiffies etc).
*/
-int get_nohz_timer_target(void)
+int get_nohz_timer_target(int pinned)
{
int cpu = smp_processor_id();
int i;
struct sched_domain *sd;
+ if (pinned || !get_sysctl_timer_migration() || !idle_cpu(cpu))
+ return cpu;
+
rcu_read_lock();
for_each_domain(cpu, sd) {
for_each_cpu(i, sched_domain_span(sd)) {
diff --git a/kernel/time/Kconfig b/kernel/time/Kconfig
index 3ce6e8c5f3fc..f448513a45ed 100644
--- a/kernel/time/Kconfig
+++ b/kernel/time/Kconfig
@@ -124,7 +124,7 @@ config NO_HZ_FULL
endchoice
config NO_HZ_FULL_ALL
- bool "Full dynticks system on all CPUs by default"
+ bool "Full dynticks system on all CPUs by default (except CPU 0)"
depends on NO_HZ_FULL
help
If the user doesn't pass the nohz_full boot option to
diff --git a/kernel/time/Makefile b/kernel/time/Makefile
index 9250130646f5..57a413fd0ebf 100644
--- a/kernel/time/Makefile
+++ b/kernel/time/Makefile
@@ -3,7 +3,10 @@ obj-y += timeconv.o posix-clock.o alarmtimer.o
obj-$(CONFIG_GENERIC_CLOCKEVENTS_BUILD) += clockevents.o
obj-$(CONFIG_GENERIC_CLOCKEVENTS) += tick-common.o
-obj-$(CONFIG_GENERIC_CLOCKEVENTS_BROADCAST) += tick-broadcast.o
+ifeq ($(CONFIG_GENERIC_CLOCKEVENTS_BROADCAST),y)
+ obj-y += tick-broadcast.o
+ obj-$(CONFIG_TICK_ONESHOT) += tick-broadcast-hrtimer.o
+endif
obj-$(CONFIG_GENERIC_SCHED_CLOCK) += sched_clock.o
obj-$(CONFIG_TICK_ONESHOT) += tick-oneshot.o
obj-$(CONFIG_TICK_ONESHOT) += tick-sched.o
diff --git a/kernel/time/clockevents.c b/kernel/time/clockevents.c
index 086ad6043bcb..ad362c260ef4 100644
--- a/kernel/time/clockevents.c
+++ b/kernel/time/clockevents.c
@@ -439,6 +439,19 @@ void clockevents_config_and_register(struct clock_event_device *dev,
}
EXPORT_SYMBOL_GPL(clockevents_config_and_register);
+int __clockevents_update_freq(struct clock_event_device *dev, u32 freq)
+{
+ clockevents_config(dev, freq);
+
+ if (dev->mode == CLOCK_EVT_MODE_ONESHOT)
+ return clockevents_program_event(dev, dev->next_event, false);
+
+ if (dev->mode == CLOCK_EVT_MODE_PERIODIC)
+ dev->set_mode(CLOCK_EVT_MODE_PERIODIC, dev);
+
+ return 0;
+}
+
/**
* clockevents_update_freq - Update frequency and reprogram a clock event device.
* @dev: device to modify
@@ -446,17 +459,22 @@ EXPORT_SYMBOL_GPL(clockevents_config_and_register);
*
* Reconfigure and reprogram a clock event device in oneshot
* mode. Must be called on the cpu for which the device delivers per
- * cpu timer events with interrupts disabled! Returns 0 on success,
- * -ETIME when the event is in the past.
+ * cpu timer events. If called for the broadcast device the core takes
+ * care of serialization.
+ *
+ * Returns 0 on success, -ETIME when the event is in the past.
*/
int clockevents_update_freq(struct clock_event_device *dev, u32 freq)
{
- clockevents_config(dev, freq);
-
- if (dev->mode != CLOCK_EVT_MODE_ONESHOT)
- return 0;
+ unsigned long flags;
+ int ret;
- return clockevents_program_event(dev, dev->next_event, false);
+ local_irq_save(flags);
+ ret = tick_broadcast_update_freq(dev, freq);
+ if (ret == -ENODEV)
+ ret = __clockevents_update_freq(dev, freq);
+ local_irq_restore(flags);
+ return ret;
}
/*
@@ -524,12 +542,13 @@ void clockevents_resume(void)
#ifdef CONFIG_GENERIC_CLOCKEVENTS
/**
* clockevents_notify - notification about relevant events
+ * Returns 0 on success, any other value on error
*/
-void clockevents_notify(unsigned long reason, void *arg)
+int clockevents_notify(unsigned long reason, void *arg)
{
struct clock_event_device *dev, *tmp;
unsigned long flags;
- int cpu;
+ int cpu, ret = 0;
raw_spin_lock_irqsave(&clockevents_lock, flags);
@@ -542,7 +561,7 @@ void clockevents_notify(unsigned long reason, void *arg)
case CLOCK_EVT_NOTIFY_BROADCAST_ENTER:
case CLOCK_EVT_NOTIFY_BROADCAST_EXIT:
- tick_broadcast_oneshot_control(reason);
+ ret = tick_broadcast_oneshot_control(reason);
break;
case CLOCK_EVT_NOTIFY_CPU_DYING:
@@ -585,6 +604,7 @@ void clockevents_notify(unsigned long reason, void *arg)
break;
}
raw_spin_unlock_irqrestore(&clockevents_lock, flags);
+ return ret;
}
EXPORT_SYMBOL_GPL(clockevents_notify);
diff --git a/kernel/time/ntp.c b/kernel/time/ntp.c
index af8d1d4f3d55..419a52cecd20 100644
--- a/kernel/time/ntp.c
+++ b/kernel/time/ntp.c
@@ -514,12 +514,13 @@ static void sync_cmos_clock(struct work_struct *work)
next.tv_sec++;
next.tv_nsec -= NSEC_PER_SEC;
}
- schedule_delayed_work(&sync_cmos_work, timespec_to_jiffies(&next));
+ queue_delayed_work(system_power_efficient_wq,
+ &sync_cmos_work, timespec_to_jiffies(&next));
}
void ntp_notify_cmos_timer(void)
{
- schedule_delayed_work(&sync_cmos_work, 0);
+ queue_delayed_work(system_power_efficient_wq, &sync_cmos_work, 0);
}
#else
diff --git a/kernel/time/tick-broadcast-hrtimer.c b/kernel/time/tick-broadcast-hrtimer.c
new file mode 100644
index 000000000000..eb682d5c697c
--- /dev/null
+++ b/kernel/time/tick-broadcast-hrtimer.c
@@ -0,0 +1,106 @@
+/*
+ * linux/kernel/time/tick-broadcast-hrtimer.c
+ * This file emulates a local clock event device
+ * via a pseudo clock device.
+ */
+#include <linux/cpu.h>
+#include <linux/err.h>
+#include <linux/hrtimer.h>
+#include <linux/interrupt.h>
+#include <linux/percpu.h>
+#include <linux/profile.h>
+#include <linux/clockchips.h>
+#include <linux/sched.h>
+#include <linux/smp.h>
+#include <linux/module.h>
+
+#include "tick-internal.h"
+
+static struct hrtimer bctimer;
+
+static void bc_set_mode(enum clock_event_mode mode,
+ struct clock_event_device *bc)
+{
+ switch (mode) {
+ case CLOCK_EVT_MODE_SHUTDOWN:
+ /*
+ * Note, we cannot cancel the timer here as we might
+ * run into the following live lock scenario:
+ *
+ * cpu 0 cpu1
+ * lock(broadcast_lock);
+ * hrtimer_interrupt()
+ * bc_handler()
+ * tick_handle_oneshot_broadcast();
+ * lock(broadcast_lock);
+ * hrtimer_cancel()
+ * wait_for_callback()
+ */
+ hrtimer_try_to_cancel(&bctimer);
+ break;
+ default:
+ break;
+ }
+}
+
+/*
+ * This is called from the guts of the broadcast code when the cpu
+ * which is about to enter idle has the earliest broadcast timer event.
+ */
+static int bc_set_next(ktime_t expires, struct clock_event_device *bc)
+{
+ /*
+ * We try to cancel the timer first. If the callback is on
+ * flight on some other cpu then we let it handle it. If we
+ * were able to cancel the timer nothing can rearm it as we
+ * own broadcast_lock.
+ *
+ * However we can also be called from the event handler of
+ * ce_broadcast_hrtimer itself when it expires. We cannot
+ * restart the timer because we are in the callback, but we
+ * can set the expiry time and let the callback return
+ * HRTIMER_RESTART.
+ */
+ if (hrtimer_try_to_cancel(&bctimer) >= 0) {
+ hrtimer_start(&bctimer, expires, HRTIMER_MODE_ABS_PINNED);
+ /* Bind the "device" to the cpu */
+ bc->bound_on = smp_processor_id();
+ } else if (bc->bound_on == smp_processor_id()) {
+ hrtimer_set_expires(&bctimer, expires);
+ }
+ return 0;
+}
+
+static struct clock_event_device ce_broadcast_hrtimer = {
+ .set_mode = bc_set_mode,
+ .set_next_ktime = bc_set_next,
+ .features = CLOCK_EVT_FEAT_ONESHOT |
+ CLOCK_EVT_FEAT_KTIME |
+ CLOCK_EVT_FEAT_HRTIMER,
+ .rating = 0,
+ .bound_on = -1,
+ .min_delta_ns = 1,
+ .max_delta_ns = KTIME_MAX,
+ .min_delta_ticks = 1,
+ .max_delta_ticks = ULONG_MAX,
+ .mult = 1,
+ .shift = 0,
+ .cpumask = cpu_all_mask,
+};
+
+static enum hrtimer_restart bc_handler(struct hrtimer *t)
+{
+ ce_broadcast_hrtimer.event_handler(&ce_broadcast_hrtimer);
+
+ if (ce_broadcast_hrtimer.next_event.tv64 == KTIME_MAX)
+ return HRTIMER_NORESTART;
+
+ return HRTIMER_RESTART;
+}
+
+void tick_setup_hrtimer_broadcast(void)
+{
+ hrtimer_init(&bctimer, CLOCK_MONOTONIC, HRTIMER_MODE_ABS);
+ bctimer.function = bc_handler;
+ clockevents_register_device(&ce_broadcast_hrtimer);
+}
diff --git a/kernel/time/tick-broadcast.c b/kernel/time/tick-broadcast.c
index 98977a57ac72..64c5990fd500 100644
--- a/kernel/time/tick-broadcast.c
+++ b/kernel/time/tick-broadcast.c
@@ -120,6 +120,19 @@ int tick_is_broadcast_device(struct clock_event_device *dev)
return (dev && tick_broadcast_device.evtdev == dev);
}
+int tick_broadcast_update_freq(struct clock_event_device *dev, u32 freq)
+{
+ int ret = -ENODEV;
+
+ if (tick_is_broadcast_device(dev)) {
+ raw_spin_lock(&tick_broadcast_lock);
+ ret = __clockevents_update_freq(dev, freq);
+ raw_spin_unlock(&tick_broadcast_lock);
+ }
+ return ret;
+}
+
+
static void err_broadcast(const struct cpumask *mask)
{
pr_crit_once("Failed to broadcast timer tick. Some CPUs may be unresponsive.\n");
@@ -272,12 +285,8 @@ static void tick_do_broadcast(struct cpumask *mask)
*/
static void tick_do_periodic_broadcast(void)
{
- raw_spin_lock(&tick_broadcast_lock);
-
cpumask_and(tmpmask, cpu_online_mask, tick_broadcast_mask);
tick_do_broadcast(tmpmask);
-
- raw_spin_unlock(&tick_broadcast_lock);
}
/*
@@ -287,13 +296,15 @@ static void tick_handle_periodic_broadcast(struct clock_event_device *dev)
{
ktime_t next;
+ raw_spin_lock(&tick_broadcast_lock);
+
tick_do_periodic_broadcast();
/*
* The device is in periodic mode. No reprogramming necessary:
*/
if (dev->mode == CLOCK_EVT_MODE_PERIODIC)
- return;
+ goto unlock;
/*
* Setup the next period for devices, which do not have
@@ -306,9 +317,11 @@ static void tick_handle_periodic_broadcast(struct clock_event_device *dev)
next = ktime_add(next, tick_period);
if (!clockevents_program_event(dev, next, false))
- return;
+ goto unlock;
tick_do_periodic_broadcast();
}
+unlock:
+ raw_spin_unlock(&tick_broadcast_lock);
}
/*
@@ -630,24 +643,61 @@ again:
raw_spin_unlock(&tick_broadcast_lock);
}
+static int broadcast_needs_cpu(struct clock_event_device *bc, int cpu)
+{
+ if (!(bc->features & CLOCK_EVT_FEAT_HRTIMER))
+ return 0;
+ if (bc->next_event.tv64 == KTIME_MAX)
+ return 0;
+ return bc->bound_on == cpu ? -EBUSY : 0;
+}
+
+static void broadcast_shutdown_local(struct clock_event_device *bc,
+ struct clock_event_device *dev)
+{
+ /*
+ * For hrtimer based broadcasting we cannot shutdown the cpu
+ * local device if our own event is the first one to expire or
+ * if we own the broadcast timer.
+ */
+ if (bc->features & CLOCK_EVT_FEAT_HRTIMER) {
+ if (broadcast_needs_cpu(bc, smp_processor_id()))
+ return;
+ if (dev->next_event.tv64 < bc->next_event.tv64)
+ return;
+ }
+ clockevents_set_mode(dev, CLOCK_EVT_MODE_SHUTDOWN);
+}
+
+static void broadcast_move_bc(int deadcpu)
+{
+ struct clock_event_device *bc = tick_broadcast_device.evtdev;
+
+ if (!bc || !broadcast_needs_cpu(bc, deadcpu))
+ return;
+ /* This moves the broadcast assignment to this cpu */
+ clockevents_program_event(bc, bc->next_event, 1);
+}
+
/*
* Powerstate information: The system enters/leaves a state, where
* affected devices might stop
+ * Returns 0 on success, -EBUSY if the cpu is used to broadcast wakeups.
*/
-void tick_broadcast_oneshot_control(unsigned long reason)
+int tick_broadcast_oneshot_control(unsigned long reason)
{
struct clock_event_device *bc, *dev;
struct tick_device *td;
unsigned long flags;
ktime_t now;
- int cpu;
+ int cpu, ret = 0;
/*
* Periodic mode does not care about the enter/exit of power
* states
*/
if (tick_broadcast_device.mode == TICKDEV_MODE_PERIODIC)
- return;
+ return 0;
/*
* We are called with preemtion disabled from the depth of the
@@ -658,7 +708,7 @@ void tick_broadcast_oneshot_control(unsigned long reason)
dev = td->evtdev;
if (!(dev->features & CLOCK_EVT_FEAT_C3STOP))
- return;
+ return 0;
bc = tick_broadcast_device.evtdev;
@@ -666,7 +716,7 @@ void tick_broadcast_oneshot_control(unsigned long reason)
if (reason == CLOCK_EVT_NOTIFY_BROADCAST_ENTER) {
if (!cpumask_test_and_set_cpu(cpu, tick_broadcast_oneshot_mask)) {
WARN_ON_ONCE(cpumask_test_cpu(cpu, tick_broadcast_pending_mask));
- clockevents_set_mode(dev, CLOCK_EVT_MODE_SHUTDOWN);
+ broadcast_shutdown_local(bc, dev);
/*
* We only reprogram the broadcast timer if we
* did not mark ourself in the force mask and
@@ -679,6 +729,16 @@ void tick_broadcast_oneshot_control(unsigned long reason)
dev->next_event.tv64 < bc->next_event.tv64)
tick_broadcast_set_event(bc, cpu, dev->next_event, 1);
}
+ /*
+ * If the current CPU owns the hrtimer broadcast
+ * mechanism, it cannot go deep idle and we remove the
+ * CPU from the broadcast mask. We don't have to go
+ * through the EXIT path as the local timer is not
+ * shutdown.
+ */
+ ret = broadcast_needs_cpu(bc, cpu);
+ if (ret)
+ cpumask_clear_cpu(cpu, tick_broadcast_oneshot_mask);
} else {
if (cpumask_test_and_clear_cpu(cpu, tick_broadcast_oneshot_mask)) {
clockevents_set_mode(dev, CLOCK_EVT_MODE_ONESHOT);
@@ -746,6 +806,7 @@ void tick_broadcast_oneshot_control(unsigned long reason)
}
out:
raw_spin_unlock_irqrestore(&tick_broadcast_lock, flags);
+ return ret;
}
/*
@@ -852,6 +913,8 @@ void tick_shutdown_broadcast_oneshot(unsigned int *cpup)
cpumask_clear_cpu(cpu, tick_broadcast_pending_mask);
cpumask_clear_cpu(cpu, tick_broadcast_force_mask);
+ broadcast_move_bc(cpu);
+
raw_spin_unlock_irqrestore(&tick_broadcast_lock, flags);
}
diff --git a/kernel/time/tick-common.c b/kernel/time/tick-common.c
index 20b2fe37d105..015661279b68 100644
--- a/kernel/time/tick-common.c
+++ b/kernel/time/tick-common.c
@@ -98,18 +98,19 @@ static void tick_periodic(int cpu)
void tick_handle_periodic(struct clock_event_device *dev)
{
int cpu = smp_processor_id();
- ktime_t next;
+ ktime_t next = dev->next_event;
tick_periodic(cpu);
if (dev->mode != CLOCK_EVT_MODE_ONESHOT)
return;
- /*
- * Setup the next period for devices, which do not have
- * periodic mode:
- */
- next = ktime_add(dev->next_event, tick_period);
for (;;) {
+ /*
+ * Setup the next period for devices, which do not have
+ * periodic mode:
+ */
+ next = ktime_add(next, tick_period);
+
if (!clockevents_program_event(dev, next, false))
return;
/*
@@ -118,12 +119,11 @@ void tick_handle_periodic(struct clock_event_device *dev)
* to be sure we're using a real hardware clocksource.
* Otherwise we could get trapped in an infinite
* loop, as the tick_periodic() increments jiffies,
- * when then will increment time, posibly causing
+ * which then will increment time, possibly causing
* the loop to trigger again and again.
*/
if (timekeeping_valid_for_hres())
tick_periodic(cpu);
- next = ktime_add(next, tick_period);
}
}
diff --git a/kernel/time/tick-internal.h b/kernel/time/tick-internal.h
index 8329669b51ec..7ab92b19965a 100644
--- a/kernel/time/tick-internal.h
+++ b/kernel/time/tick-internal.h
@@ -46,7 +46,7 @@ extern int tick_switch_to_oneshot(void (*handler)(struct clock_event_device *));
extern void tick_resume_oneshot(void);
# ifdef CONFIG_GENERIC_CLOCKEVENTS_BROADCAST
extern void tick_broadcast_setup_oneshot(struct clock_event_device *bc);
-extern void tick_broadcast_oneshot_control(unsigned long reason);
+extern int tick_broadcast_oneshot_control(unsigned long reason);
extern void tick_broadcast_switch_to_oneshot(void);
extern void tick_shutdown_broadcast_oneshot(unsigned int *cpup);
extern int tick_resume_broadcast_oneshot(struct clock_event_device *bc);
@@ -58,7 +58,7 @@ static inline void tick_broadcast_setup_oneshot(struct clock_event_device *bc)
{
BUG();
}
-static inline void tick_broadcast_oneshot_control(unsigned long reason) { }
+static inline int tick_broadcast_oneshot_control(unsigned long reason) { return 0; }
static inline void tick_broadcast_switch_to_oneshot(void) { }
static inline void tick_shutdown_broadcast_oneshot(unsigned int *cpup) { }
static inline int tick_broadcast_oneshot_active(void) { return 0; }
@@ -87,7 +87,7 @@ static inline void tick_broadcast_setup_oneshot(struct clock_event_device *bc)
{
BUG();
}
-static inline void tick_broadcast_oneshot_control(unsigned long reason) { }
+static inline int tick_broadcast_oneshot_control(unsigned long reason) { return 0; }
static inline void tick_shutdown_broadcast_oneshot(unsigned int *cpup) { }
static inline int tick_resume_broadcast_oneshot(struct clock_event_device *bc)
{
@@ -111,6 +111,7 @@ extern int tick_resume_broadcast(void);
extern void tick_broadcast_init(void);
extern void
tick_set_periodic_handler(struct clock_event_device *dev, int broadcast);
+int tick_broadcast_update_freq(struct clock_event_device *dev, u32 freq);
#else /* !BROADCAST */
@@ -133,6 +134,8 @@ static inline void tick_shutdown_broadcast(unsigned int *cpup) { }
static inline void tick_suspend_broadcast(void) { }
static inline int tick_resume_broadcast(void) { return 0; }
static inline void tick_broadcast_init(void) { }
+static inline int tick_broadcast_update_freq(struct clock_event_device *dev,
+ u32 freq) { return -ENODEV; }
/*
* Set the periodic handler in non broadcast mode
@@ -152,6 +155,8 @@ static inline int tick_device_is_functional(struct clock_event_device *dev)
return !(dev->features & CLOCK_EVT_FEAT_DUMMY);
}
+int __clockevents_update_freq(struct clock_event_device *dev, u32 freq);
+
#endif
extern void do_timer(unsigned long ticks);
diff --git a/kernel/time/timekeeping_debug.c b/kernel/time/timekeeping_debug.c
index 802433a4f5eb..4d54f97558df 100644
--- a/kernel/time/timekeeping_debug.c
+++ b/kernel/time/timekeeping_debug.c
@@ -21,6 +21,8 @@
#include <linux/seq_file.h>
#include <linux/time.h>
+#include "timekeeping_internal.h"
+
static unsigned int sleep_time_bin[32] = {0};
static int tk_debug_show_sleep_time(struct seq_file *s, void *data)
diff --git a/kernel/timer.c b/kernel/timer.c
index d78de047599b..87bd529879c2 100644
--- a/kernel/timer.c
+++ b/kernel/timer.c
@@ -81,6 +81,7 @@ struct tvec_base {
unsigned long timer_jiffies;
unsigned long next_timer;
unsigned long active_timers;
+ unsigned long all_timers;
struct tvec_root tv1;
struct tvec tv2;
struct tvec tv3;
@@ -337,6 +338,20 @@ void set_timer_slack(struct timer_list *timer, int slack_hz)
}
EXPORT_SYMBOL_GPL(set_timer_slack);
+/*
+ * If the list is empty, catch up ->timer_jiffies to the current time.
+ * The caller must hold the tvec_base lock. Returns true if the list
+ * was empty and therefore ->timer_jiffies was updated.
+ */
+static bool catchup_timer_jiffies(struct tvec_base *base)
+{
+ if (!base->all_timers) {
+ base->timer_jiffies = jiffies;
+ return true;
+ }
+ return false;
+}
+
static void
__internal_add_timer(struct tvec_base *base, struct timer_list *timer)
{
@@ -383,15 +398,17 @@ __internal_add_timer(struct tvec_base *base, struct timer_list *timer)
static void internal_add_timer(struct tvec_base *base, struct timer_list *timer)
{
+ (void)catchup_timer_jiffies(base);
__internal_add_timer(base, timer);
/*
* Update base->active_timers and base->next_timer
*/
if (!tbase_get_deferrable(timer->base)) {
- if (time_before(timer->expires, base->next_timer))
+ if (!base->active_timers++ ||
+ time_before(timer->expires, base->next_timer))
base->next_timer = timer->expires;
- base->active_timers++;
}
+ base->all_timers++;
}
#ifdef CONFIG_TIMER_STATS
@@ -671,6 +688,8 @@ detach_expired_timer(struct timer_list *timer, struct tvec_base *base)
detach_timer(timer, true);
if (!tbase_get_deferrable(timer->base))
base->active_timers--;
+ base->all_timers--;
+ (void)catchup_timer_jiffies(base);
}
static int detach_if_pending(struct timer_list *timer, struct tvec_base *base,
@@ -685,6 +704,8 @@ static int detach_if_pending(struct timer_list *timer, struct tvec_base *base,
if (timer->expires == base->next_timer)
base->next_timer = base->timer_jiffies;
}
+ base->all_timers--;
+ (void)catchup_timer_jiffies(base);
return 1;
}
@@ -739,12 +760,7 @@ __mod_timer(struct timer_list *timer, unsigned long expires,
debug_activate(timer, expires);
- cpu = smp_processor_id();
-
-#if defined(CONFIG_NO_HZ_COMMON) && defined(CONFIG_SMP)
- if (!pinned && get_sysctl_timer_migration() && idle_cpu(cpu))
- cpu = get_nohz_timer_target();
-#endif
+ cpu = get_nohz_timer_target(pinned);
new_base = per_cpu(tvec_bases, cpu);
if (base != new_base) {
@@ -939,8 +955,15 @@ void add_timer_on(struct timer_list *timer, int cpu)
* with the timer by holding the timer base lock. This also
* makes sure that a CPU on the way to stop its tick can not
* evaluate the timer wheel.
+ *
+ * Spare the IPI for deferrable timers on idle targets though.
+ * The next busy ticks will take care of it. Except full dynticks
+ * require special care against races with idle_cpu(), lets deal
+ * with that later.
*/
- wake_up_nohz_cpu(cpu);
+ if (!tbase_get_deferrable(timer->base) || tick_nohz_full_cpu(cpu))
+ wake_up_nohz_cpu(cpu);
+
spin_unlock_irqrestore(&base->lock, flags);
}
EXPORT_SYMBOL_GPL(add_timer_on);
@@ -1146,6 +1169,10 @@ static inline void __run_timers(struct tvec_base *base)
struct timer_list *timer;
spin_lock_irq(&base->lock);
+ if (catchup_timer_jiffies(base)) {
+ spin_unlock_irq(&base->lock);
+ return;
+ }
while (time_after_eq(jiffies, base->timer_jiffies)) {
struct list_head work_list;
struct list_head *head = &work_list;
@@ -1160,7 +1187,7 @@ static inline void __run_timers(struct tvec_base *base)
!cascade(base, &base->tv4, INDEX(2)))
cascade(base, &base->tv5, INDEX(3));
++base->timer_jiffies;
- list_replace_init(base->tv1.vec + index, &work_list);
+ list_replace_init(base->tv1.vec + index, head);
while (!list_empty(head)) {
void (*fn)(unsigned long);
unsigned long data;
@@ -1523,9 +1550,8 @@ static int init_timers_cpu(int cpu)
if (!base)
return -ENOMEM;
- /* Make sure that tvec_base is 2 byte aligned */
- if (tbase_get_deferrable(base)) {
- WARN_ON(1);
+ /* Make sure tvec_base has TIMER_FLAG_MASK bits free */
+ if (WARN_ON(base != tbase_get_base(base))) {
kfree(base);
return -ENOMEM;
}
@@ -1559,6 +1585,7 @@ static int init_timers_cpu(int cpu)
base->timer_jiffies = jiffies;
base->next_timer = base->timer_jiffies;
base->active_timers = 0;
+ base->all_timers = 0;
return 0;
}
@@ -1648,9 +1675,9 @@ void __init init_timers(void)
err = timer_cpu_notify(&timers_nb, (unsigned long)CPU_UP_PREPARE,
(void *)(long)smp_processor_id());
- init_timer_stats();
-
BUG_ON(err != NOTIFY_OK);
+
+ init_timer_stats();
register_cpu_notifier(&timers_nb);
open_softirq(TIMER_SOFTIRQ, run_timer_softirq);
}
diff --git a/kernel/workqueue.c b/kernel/workqueue.c
index 3fa5b8f3aae3..0ee63af30bd1 100644
--- a/kernel/workqueue.c
+++ b/kernel/workqueue.c
@@ -516,6 +516,13 @@ void destroy_work_on_stack(struct work_struct *work)
}
EXPORT_SYMBOL_GPL(destroy_work_on_stack);
+void destroy_delayed_work_on_stack(struct delayed_work *work)
+{
+ destroy_timer_on_stack(&work->timer);
+ debug_object_free(&work->work, &work_debug_descr);
+}
+EXPORT_SYMBOL_GPL(destroy_delayed_work_on_stack);
+
#else
static inline void debug_work_activate(struct work_struct *work) { }
static inline void debug_work_deactivate(struct work_struct *work) { }