summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorPaul Bolle <pebolle@tiscali.nl>2014-02-11 13:38:47 +0100
committerJiri Kosina <jkosina@suse.cz>2014-02-20 14:38:06 +0100
commitc7dcec7dd463907c451048b04f30d1870fe5cacc (patch)
tree0239b0d94995fdfdc1b8f41408d9bb364a8132ad
parent392b21897d6cbff55c5b28910dfdc74e3020de6c (diff)
downloadlinux-c7dcec7dd463907c451048b04f30d1870fe5cacc.tar.bz2
Kconfig: Remove useless "default N" lines
A number of Kconfig entries default to (uppercase) "N". It was clearly intended to use "default n". But since (lowercase) "n" is the default anyway, these lines might as well be removed. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
-rw-r--r--arch/arc/Kconfig1
-rw-r--r--arch/cris/arch-v32/drivers/Kconfig2
-rw-r--r--drivers/misc/mic/Kconfig2
-rw-r--r--drivers/staging/android/Kconfig2
-rw-r--r--drivers/staging/bcm/Kconfig1
-rw-r--r--drivers/staging/frontier/Kconfig1
-rw-r--r--drivers/staging/media/go7007/Kconfig3
-rw-r--r--drivers/staging/rtl8187se/Kconfig1
-rw-r--r--drivers/staging/rtl8188eu/Kconfig1
-rw-r--r--drivers/staging/rtl8192e/rtl8192e/Kconfig1
-rw-r--r--drivers/staging/rtl8192u/Kconfig1
-rw-r--r--drivers/staging/rtl8712/Kconfig2
-rw-r--r--drivers/staging/usbip/Kconfig4
-rw-r--r--drivers/usb/core/Kconfig1
-rw-r--r--drivers/usb/host/Kconfig3
15 files changed, 0 insertions, 26 deletions
diff --git a/arch/arc/Kconfig b/arch/arc/Kconfig
index 9063ae6553cc..3d7f1137a21b 100644
--- a/arch/arc/Kconfig
+++ b/arch/arc/Kconfig
@@ -356,7 +356,6 @@ config ARC_CURR_IN_REG
config ARC_MISALIGN_ACCESS
bool "Emulate unaligned memory access (userspace only)"
- default N
select SYSCTL_ARCH_UNALIGN_NO_WARN
select SYSCTL_ARCH_UNALIGN_ALLOW
help
diff --git a/arch/cris/arch-v32/drivers/Kconfig b/arch/cris/arch-v32/drivers/Kconfig
index 6792503aaf79..15a9ed1d579c 100644
--- a/arch/cris/arch-v32/drivers/Kconfig
+++ b/arch/cris/arch-v32/drivers/Kconfig
@@ -11,7 +11,6 @@ config ETRAX_ETHERNET
config ETRAX_NO_PHY
bool "PHY not present"
depends on ETRAX_ETHERNET
- default N
help
This option disables all MDIO communication with an ethernet
transceiver connected to the MII interface. This option shall
@@ -116,7 +115,6 @@ config ETRAX_AXISFLASHMAP
config ETRAX_AXISFLASHMAP_MTD0WHOLE
bool "MTD0 is whole boot flash device"
depends on ETRAX_AXISFLASHMAP
- default N
help
When this option is not set, mtd0 refers to the first partition
on the boot flash device. When set, mtd0 refers to the whole
diff --git a/drivers/misc/mic/Kconfig b/drivers/misc/mic/Kconfig
index e42b331edbc6..462a5b1d8651 100644
--- a/drivers/misc/mic/Kconfig
+++ b/drivers/misc/mic/Kconfig
@@ -4,7 +4,6 @@ config INTEL_MIC_HOST
tristate "Intel MIC Host Driver"
depends on 64BIT && PCI && X86
select VHOST_RING
- default N
help
This enables Host Driver support for the Intel Many Integrated
Core (MIC) family of PCIe form factor coprocessor devices that
@@ -25,7 +24,6 @@ config INTEL_MIC_CARD
tristate "Intel MIC Card Driver"
depends on 64BIT && X86
select VIRTIO
- default N
help
This enables card driver support for the Intel Many Integrated
Core (MIC) device family. The card driver communicates shutdown/
diff --git a/drivers/staging/android/Kconfig b/drivers/staging/android/Kconfig
index 1e9ab6dfc90d..22cf17dcb7da 100644
--- a/drivers/staging/android/Kconfig
+++ b/drivers/staging/android/Kconfig
@@ -2,7 +2,6 @@ menu "Android"
config ANDROID
bool "Android Drivers"
- default N
---help---
Enable support for various drivers needed on the Android platform
@@ -60,7 +59,6 @@ config ANDROID_TIMED_GPIO
config ANDROID_LOW_MEMORY_KILLER
bool "Android Low Memory Killer"
- default N
---help---
Registers processes to be killed when memory is low
diff --git a/drivers/staging/bcm/Kconfig b/drivers/staging/bcm/Kconfig
index 83c9752504d4..8acf4b24a7c9 100644
--- a/drivers/staging/bcm/Kconfig
+++ b/drivers/staging/bcm/Kconfig
@@ -1,7 +1,6 @@
config BCM_WIMAX
tristate "Beceem BCS200/BCS220-3 and BCSM250 wimax support"
depends on USB && NET
- default N
help
This is an experimental driver for the Beceem WIMAX chipset used
by Sprint 4G.
diff --git a/drivers/staging/frontier/Kconfig b/drivers/staging/frontier/Kconfig
index 7121853bd397..4da290b2f5bd 100644
--- a/drivers/staging/frontier/Kconfig
+++ b/drivers/staging/frontier/Kconfig
@@ -1,6 +1,5 @@
config TRANZPORT
tristate "Frontier Tranzport and Alphatrack support"
depends on USB
- default N
---help---
Enable support for the Frontier Tranzport and Alphatrack devices.
diff --git a/drivers/staging/media/go7007/Kconfig b/drivers/staging/media/go7007/Kconfig
index 04bd0fba7b1f..95a3af644a92 100644
--- a/drivers/staging/media/go7007/Kconfig
+++ b/drivers/staging/media/go7007/Kconfig
@@ -13,7 +13,6 @@ config VIDEO_GO7007
select VIDEO_TW9906 if MEDIA_SUBDRV_AUTOSELECT
select VIDEO_OV7640 if MEDIA_SUBDRV_AUTOSELECT
select VIDEO_UDA1342 if MEDIA_SUBDRV_AUTOSELECT
- default N
---help---
This is a video4linux driver for the WIS GO7007 MPEG
encoder chip.
@@ -24,7 +23,6 @@ config VIDEO_GO7007
config VIDEO_GO7007_USB
tristate "WIS GO7007 USB support"
depends on VIDEO_GO7007 && USB
- default N
---help---
This is a video4linux driver for the WIS GO7007 MPEG
encoder chip over USB.
@@ -46,7 +44,6 @@ config VIDEO_GO7007_LOADER
config VIDEO_GO7007_USB_S2250_BOARD
tristate "Sensoray 2250/2251 support"
depends on VIDEO_GO7007_USB && USB
- default N
---help---
This is a video4linux driver for the Sensoray 2250/2251 device.
diff --git a/drivers/staging/rtl8187se/Kconfig b/drivers/staging/rtl8187se/Kconfig
index 3162aabbeb07..ff8d41ebca36 100644
--- a/drivers/staging/rtl8187se/Kconfig
+++ b/drivers/staging/rtl8187se/Kconfig
@@ -6,6 +6,5 @@ config R8187SE
select WEXT_PRIV
select EEPROM_93CX6
select CRYPTO
- default N
---help---
If built as a module, it will be called r8187se.ko.
diff --git a/drivers/staging/rtl8188eu/Kconfig b/drivers/staging/rtl8188eu/Kconfig
index c9c548f17494..70fecfabc0c7 100644
--- a/drivers/staging/rtl8188eu/Kconfig
+++ b/drivers/staging/rtl8188eu/Kconfig
@@ -3,7 +3,6 @@ config R8188EU
depends on WLAN && USB
select WIRELESS_EXT
select WEXT_PRIV
- default N
---help---
This option adds the Realtek RTL8188EU USB device such as TP-Link TL-WN725N.
If built as a module, it will be called r8188eu.
diff --git a/drivers/staging/rtl8192e/rtl8192e/Kconfig b/drivers/staging/rtl8192e/rtl8192e/Kconfig
index 50e0d91a409a..ad82bc348a75 100644
--- a/drivers/staging/rtl8192e/rtl8192e/Kconfig
+++ b/drivers/staging/rtl8192e/rtl8192e/Kconfig
@@ -5,5 +5,4 @@ config RTL8192E
select WIRELESS_EXT
select WEXT_PRIV
select CRYPTO
- default N
---help---
diff --git a/drivers/staging/rtl8192u/Kconfig b/drivers/staging/rtl8192u/Kconfig
index 3f055091b35f..3ee9d0d00fb6 100644
--- a/drivers/staging/rtl8192u/Kconfig
+++ b/drivers/staging/rtl8192u/Kconfig
@@ -5,5 +5,4 @@ config RTL8192U
select WIRELESS_EXT
select WEXT_PRIV
select CRYPTO
- default N
---help---
diff --git a/drivers/staging/rtl8712/Kconfig b/drivers/staging/rtl8712/Kconfig
index 6a43312380e0..f160eee52f09 100644
--- a/drivers/staging/rtl8712/Kconfig
+++ b/drivers/staging/rtl8712/Kconfig
@@ -4,7 +4,6 @@ config R8712U
select WIRELESS_EXT
select WEXT_PRIV
select FW_LOADER
- default N
---help---
This option adds the Realtek RTL8712 USB device such as the D-Link DWA-130.
If built as a module, it will be called r8712u.
@@ -12,7 +11,6 @@ config R8712U
config R8712_TX_AGGR
bool "Realtek RTL8712U Transmit Aggregation code"
depends on R8712U && BROKEN
- default N
---help---
This option provides transmit aggregation for the Realtek RTL8712 USB device.
diff --git a/drivers/staging/usbip/Kconfig b/drivers/staging/usbip/Kconfig
index 886000980474..bd99e9e47e50 100644
--- a/drivers/staging/usbip/Kconfig
+++ b/drivers/staging/usbip/Kconfig
@@ -1,7 +1,6 @@
config USBIP_CORE
tristate "USB/IP support"
depends on USB && NET
- default N
---help---
This enables pushing USB packets over IP to allow remote
machines direct access to USB devices. It provides the
@@ -18,7 +17,6 @@ config USBIP_CORE
config USBIP_VHCI_HCD
tristate "VHCI hcd"
depends on USBIP_CORE
- default N
---help---
This enables the USB/IP virtual host controller driver,
which is run on the remote machine.
@@ -29,7 +27,6 @@ config USBIP_VHCI_HCD
config USBIP_HOST
tristate "Host driver"
depends on USBIP_CORE
- default N
---help---
This enables the USB/IP host driver, which is run on the
machine that is sharing the USB devices.
@@ -40,6 +37,5 @@ config USBIP_HOST
config USBIP_DEBUG
bool "Debug messages for USB/IP"
depends on USBIP_CORE
- default N
---help---
This enables the debug messages from the USB/IP drivers.
diff --git a/drivers/usb/core/Kconfig b/drivers/usb/core/Kconfig
index fed7f68d025d..cb8e99156f5a 100644
--- a/drivers/usb/core/Kconfig
+++ b/drivers/usb/core/Kconfig
@@ -10,7 +10,6 @@ config USB_DEBUG
config USB_ANNOUNCE_NEW_DEVICES
bool "USB announce new devices"
- default N
help
Say Y here if you want the USB core to always announce the
idVendor, idProduct, Manufacturer, Product, and SerialNumber
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index a9707da7da0b..c8b4161613cf 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -314,7 +314,6 @@ config USB_ISP1760_HCD
config USB_ISP1362_HCD
tristate "ISP1362 HCD support"
- default N
---help---
Supports the Philips ISP1362 chip as a host controller
@@ -326,7 +325,6 @@ config USB_ISP1362_HCD
config USB_FUSBH200_HCD
tristate "FUSBH200 HCD support"
depends on USB
- default N
---help---
Faraday FUSBH200 is designed to meet USB2.0 EHCI specification
with minor modification.
@@ -337,7 +335,6 @@ config USB_FUSBH200_HCD
config USB_FOTG210_HCD
tristate "FOTG210 HCD support"
depends on USB
- default N
---help---
Faraday FOTG210 is an OTG controller which can be configured as
an USB2.0 host. It is designed to meet USB2.0 EHCI specification