summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorEvgeny Boger <boger@contactless.ru>2014-01-23 15:56:18 -0800
committerLinus Torvalds <torvalds@linux-foundation.org>2014-01-23 16:37:04 -0800
commit3089a4c8d3abc7e2ab105d1d39d415110d1566d6 (patch)
tree5064f69853949cb8b5d245c932f65a3202d21219
parent63509beaf7ed7a9dc8c574be61189fce791489f0 (diff)
downloadlinux-3089a4c8d3abc7e2ab105d1d39d415110d1566d6.tar.bz2
drivers/w1/masters/w1-gpio.c: add strong pullup emulation
Strong pullup is emulated by driving pin logic high after write command when using tri-state push-pull GPIO. Signed-off-by: Evgeny Boger <boger@contactless.ru> Cc: Greg KH <greg@kroah.com> Acked-by: David Fries <david@fries.net> Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-rw-r--r--drivers/w1/masters/w1-gpio.c22
-rw-r--r--drivers/w1/w1_int.c12
-rw-r--r--include/linux/w1-gpio.h1
3 files changed, 23 insertions, 12 deletions
diff --git a/drivers/w1/masters/w1-gpio.c b/drivers/w1/masters/w1-gpio.c
index e36b18b2817b..9709b8b484ba 100644
--- a/drivers/w1/masters/w1-gpio.c
+++ b/drivers/w1/masters/w1-gpio.c
@@ -18,10 +18,31 @@
#include <linux/of_gpio.h>
#include <linux/err.h>
#include <linux/of.h>
+#include <linux/delay.h>
#include "../w1.h"
#include "../w1_int.h"
+static u8 w1_gpio_set_pullup(void *data, int delay)
+{
+ struct w1_gpio_platform_data *pdata = data;
+
+ if (delay) {
+ pdata->pullup_duration = delay;
+ } else {
+ if (pdata->pullup_duration) {
+ gpio_direction_output(pdata->pin, 1);
+
+ msleep(pdata->pullup_duration);
+
+ gpio_direction_input(pdata->pin);
+ }
+ pdata->pullup_duration = 0;
+ }
+
+ return 0;
+}
+
static void w1_gpio_write_bit_dir(void *data, u8 bit)
{
struct w1_gpio_platform_data *pdata = data;
@@ -132,6 +153,7 @@ static int w1_gpio_probe(struct platform_device *pdev)
} else {
gpio_direction_input(pdata->pin);
master->write_bit = w1_gpio_write_bit_dir;
+ master->set_pullup = w1_gpio_set_pullup;
}
err = w1_add_master_device(master);
diff --git a/drivers/w1/w1_int.c b/drivers/w1/w1_int.c
index 5a98649f6abc..590bd8a7cd1b 100644
--- a/drivers/w1/w1_int.c
+++ b/drivers/w1/w1_int.c
@@ -117,18 +117,6 @@ int w1_add_master_device(struct w1_bus_master *master)
printk(KERN_ERR "w1_add_master_device: invalid function set\n");
return(-EINVAL);
}
- /* While it would be electrically possible to make a device that
- * generated a strong pullup in bit bang mode, only hardware that
- * controls 1-wire time frames are even expected to support a strong
- * pullup. w1_io.c would need to support calling set_pullup before
- * the last write_bit operation of a w1_write_8 which it currently
- * doesn't.
- */
- if (!master->write_byte && !master->touch_bit && master->set_pullup) {
- printk(KERN_ERR "w1_add_master_device: set_pullup requires "
- "write_byte or touch_bit, disabling\n");
- master->set_pullup = NULL;
- }
/* Lock until the device is added (or not) to w1_masters. */
mutex_lock(&w1_mlock);
diff --git a/include/linux/w1-gpio.h b/include/linux/w1-gpio.h
index 065e3ae79ab0..d58594a32324 100644
--- a/include/linux/w1-gpio.h
+++ b/include/linux/w1-gpio.h
@@ -20,6 +20,7 @@ struct w1_gpio_platform_data {
unsigned int is_open_drain:1;
void (*enable_external_pullup)(int enable);
unsigned int ext_pullup_enable_pin;
+ unsigned int pullup_duration;
};
#endif /* _LINUX_W1_GPIO_H */