diff options
Diffstat (limited to 'src/main.c')
| -rw-r--r-- | src/main.c | 99 |
1 files changed, 0 insertions, 99 deletions
@@ -68,105 +68,6 @@ void show_usage() int i; show_title(); -#if 0 - // TODO: remove console: serial.c - // TODO: remove inject usb and supported list - // TODO: remove option for calculate hash - - printf ("" - -#if defined(WITH_USB) && ! defined(WITH_DEVICE) - "Over USB:\n" - " -b [cmdline] boot default or loaded kernel with cmdline (default: use default kernel cmdline)\n" - " -R reboot device\n" - " -l load all specified images to RAM\n" - " -f flash all specified images\n" - " -c cold flash 2nd and secondary images\n" - "\n" -#endif - -#ifdef WITH_DEVICE - "On device:\n" - " -R reboot device\n" - " -f flash all specified images\n" - " -x [/dev/mtd] check for bad blocks on mtd device (default: check all)\n" - " -E dump all images from device to fiasco image, see -M and -t\n" - " -e [dir] dump all images from device to directory, see -t (default: current dir)\n" - "\n" -#endif - -#if defined(WITH_USB) || defined(WITH_DEVICE) - "Device configuration:\n" - " -i identify, show all information about device\n" - " -D 0|1|2 change root device: 0 - flash, 1 - mmc, 2 - usb\n" - " -U 0|1 disable/enable USB host mode\n" - " -r 0|1 disable/enable R&D mode\n" - " -F flags change R&D flags, flags are comma separated list, can be empty\n" - " -H rev change HW revision\n" - " -K ver change kernel version string\n" - " -N ver change NOLO version string\n" - " -S ver change SW release version string\n" - " -C ver change content eMMC version string\n" - "\n" -#endif - - "Normal image specification:\n" - " -m [arg] specify normal image\n" - " arg is [[[dev:[hw:]]ver:]type:]file[%%lay]\n" - " dev is device name string (default: emtpy)\n" - " hw are comma separated list of HW revisions (default: empty)\n" - " ver is image version string (default: empty)\n" - " type is image type (default: try autodetect)\n" - " file is image file name\n" - " lay is layout file name (default: none)\n" - "\n" - - "Fiasco image specification:\n" - " -M file specify input fiasco image\n" - " -t [types] filter images by comma separated list of image types (default: do not filter)\n" - " -d [dev] filter images by device (default: do not filter)\n" - " -w [hw] filter images by HW revision (default: do not filter)\n" - " -u [dir] unpack fiasco image to directory (default: current dir)\n" - " -g [ver] generate fiasco image for SW release version (default: without SW release)\n" - "\n" - - "Other options:\n" - " -I identify images\n" -#if defined(WITH_USB) || defined(WITH_DEVICE) - " -c console prompt mode\n" -#endif -#if ( defined(WITH_USB) || defined(WITH_DEVICE) ) && defined(WITH_SQUEUES) - " -Q enter shared queues server mode (for gui or remote)\n" -#endif - " -s simulate, do not flash or write on disk\n" - " -n disable hash, checksum and image type checking\n" - " -v be verbose and noisy\n" - " -V show 0xFFFF version information\n" - " -h show this help message\n" - "\n" - -#if defined(WITH_USB) || defined(WITH_DEVICE) - "R&D flags:\n" - " no-omap-wd disable auto reboot by OMAP watchdog\n" - " no-ext-wd disable auto reboot by external watchdog\n" - " no-lifeguard-reset disable auto reboot by lifeguard\n" - " serial-console enable serial console\n" - " no-usb-timeout disable usb timeout\n" - " sti-console enable sti console\n" - " no-charging disable battery charging\n" - " force-power-key force omap boot reason to power key\n" - "\n" -#endif - - ); - - printf( "Image types:\n"); - for ( i = 0; image_types[i]; ++i ) - printf(" %-15s %s\n", image_types[i], image_desc[i]); - printf( "\n"); - -#endif - #if HAVE_USB printf ("Over USB:\n" " -b [arg] boots the kernel with arguments\n" |