summaryrefslogtreecommitdiffstats
path: root/doc/usage
diff options
context:
space:
mode:
Diffstat (limited to 'doc/usage')
-rw-r--r--doc/usage27
1 files changed, 15 insertions, 12 deletions
diff --git a/doc/usage b/doc/usage
index d297505..f784b1d 100644
--- a/doc/usage
+++ b/doc/usage
@@ -8,6 +8,7 @@ Tablets (n770 and n800).
- reboot de mother board
- extract the current firmware pieces from the device (dump)
- set the USB host/slave mode
+ - pack/unpack fiasco firmwares
- fine grained R&D flags support
- identify firmware pieces
- dump mtd partitions (embedded mtd-utils source code)
@@ -19,27 +20,29 @@ Tablets (n770 and n800).
This is the help message of the tool:
<pre>
<b>~$ 0xFFFF -h</b>
-0xFFFF v0.2 // The Free Fiasco Firmware Flasher
+0xFFFF v0.3 // The Free Fiasco Firmware Flasher
-b [arg] boots the kernel with arguments
+ -c console prompt mode
+ -C [/dev/mtd] check bad blocks on mtd
+ -d [vid:pid] injects a usb device into the supported list
+ -D [0|1|2] sets the root device to flash (0), mmc (1) or usb (2)
-e [path] dump and extract pieces to path
- -r [0|1] disable/enable R&D mode
-f <flags> set the given RD flags (see '-f help')
- -p [[p%]file] piece-of-firmware % file-where-this-piece-is
- -u [fiasco] unpack target fiasco image
- -U [0|1] disable/enable the usb host mode
- -s [serial] serial port console (minicom like terminal)
- -C [/dev/mtd] check bad blocks on mtd
- -c console prompt mode
+ -F [fiasco] flash a fiasco firmware image
-h show this help message
+ -H [file] calculate hash for file
-i show device information (let standby mode)
-I [piece] identify a firmware piece
- -l list supported usb device ids
- -d [vid:pid] injects a usb device into the supported list
- -D [0|1|2] sets the root device to flash (0), mmc (1) or usb (2)
+ -l, -L list supported usb device ids
+ -p [[p%]file] piece-of-firmware % file-where-this-piece-is
+ -r [0|1] disable/enable R&D mode
-R reboot the omap board
- -x extract configuration entries from /dev/mtd1
+ -s [serial] serial port console (minicom like terminal)
+ -u [fiasco] unpack target fiasco image
+ -U [0|1] disable/enable the usb host mode
-v be verbose and noisy
-V show 0xFFFF version information
+ -x extract configuration entries from /dev/mtd1
Pieces are: xloader secondary kernel initfs rootfs omap-nand
</pre>