diff options
| author | Hans de Goede <hdegoede@redhat.com> | 2022-11-28 10:28:48 +0100 |
|---|---|---|
| committer | Sebastian Reichel <sebastian.reichel@collabora.com> | 2022-12-03 03:06:51 +0100 |
| commit | a7aaa80098d5b7608b2dc1e883e3c3f929415243 (patch) | |
| tree | 5d1906952989cc7eced122a1caa838a168fb8fad /drivers/power | |
| parent | 54c03bfd094fb74f9533a9c28250219afe182382 (diff) | |
| download | linux-a7aaa80098d5b7608b2dc1e883e3c3f929415243.tar.bz2 | |
power: supply: bq25890: Ensure pump_express_work is cancelled on remove
The pump_express_work which gets queued from an external_power_changed
callback might be pending / running on remove() (or on probe failure).
Add a devm action cancelling the work, to ensure that it is cancelled.
Note the devm action is added before devm_power_supply_register(), making
it run after devm unregisters the power_supply, so that the work cannot
be queued anymore (this is also why a devm action is used for this).
Fixes: 48f45b094dbb ("power: supply: bq25890: Support higher charging voltages through Pump Express+ protocol")
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Diffstat (limited to 'drivers/power')
| -rw-r--r-- | drivers/power/supply/bq25890_charger.c | 15 |
1 files changed, 15 insertions, 0 deletions
diff --git a/drivers/power/supply/bq25890_charger.c b/drivers/power/supply/bq25890_charger.c index 512c81662eea..866c475bb735 100644 --- a/drivers/power/supply/bq25890_charger.c +++ b/drivers/power/supply/bq25890_charger.c @@ -1317,6 +1317,13 @@ static int bq25890_fw_probe(struct bq25890_device *bq) return 0; } +static void bq25890_non_devm_cleanup(void *data) +{ + struct bq25890_device *bq = data; + + cancel_delayed_work_sync(&bq->pump_express_work); +} + static int bq25890_probe(struct i2c_client *client) { struct device *dev = &client->dev; @@ -1372,6 +1379,14 @@ static int bq25890_probe(struct i2c_client *client) /* OTG reporting */ bq->usb_phy = devm_usb_get_phy(dev, USB_PHY_TYPE_USB2); + /* + * This must be before bq25890_power_supply_init(), so that it runs + * after devm unregisters the power_supply. + */ + ret = devm_add_action_or_reset(dev, bq25890_non_devm_cleanup, bq); + if (ret) + return ret; + ret = bq25890_register_regulator(bq); if (ret) return ret; |