| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Passing NULL format parameter to vsnprintf results in invalid argument
error on glibc. But with some other libc libraries (musl and uClibc)
this results in dereferencing NULL pointer and crash due to
segmentation fault.
|
|
There is no need to duplicate code in g_dbus_send_error_valist.
|
|
The g_dbus_get_flags function enables detection of when the
G_DBUS_FLAG_ENABLE_EXPERIMENTAL is set.
|
|
This actually creates a problem since the code now does flush any pending
message on the queue any signal will be send right away before the
actual reply to GetManagedObjects which will not contain those interfaces.
|
|
data->conn and data->path must be destroyed before freeing "data".
|
|
When we return FALSE from idle handlers, the source is removed.
This will be causing warnings in glib 2.40.
See https://bugzilla.gnome.org/show_bug.cgi?id=710724
|
|
"Warning: if the connection is disconnected or you try to send Unix file
descriptors on a connection that does not support them, the
DBusPendingCall will be set to NULL, so be careful with this."
Check this in g_dbus_send_message_with_reply so that callers don't need
to double check for NULL if g_dbus_send_message_with_reply returned
TRUE.
This also fix crash if passing FD over D-Bus is blocked e.g. by SELinux
policy.
bluetoothd[1894]: profiles/audio/avdtp.c:session_cb()
bluetoothd[1894]: profiles/audio/avdtp.c:avdtp_parse_cmd() Received
SET_CONFIGURATION_CMD
bluetoothd[1894]: profiles/audio/a2dp.c:endpoint_setconf_ind() Source
0x6c5000: Set_Configuration_Ind
bluetoothd[1894]: profiles/audio/avdtp.c:avdtp_ref() 0x6df360: ref=1
bluetoothd[1894]: profiles/audio/a2dp.c:setup_ref() 0x6d32b0: ref=1
process 1894: arguments to dbus_pending_call_set_notify() were incorrect,
assertion "pending != NULL" failed in file dbus-pending-call.c line
636.
This is normally a bug in some application using the D-Bus library.
|
|
This fixes double emission of PropertiesChanged introduced by flushing
changes, the flushing can happen during the pending processing so the
pending_prop flag needs to be updated in the beginning and the list of
properties can be freed before g_dbus_send_message as it is not required
anymore.
|
|
dbus_connection_send* should not be called directly except by
g_dbus_send_message.
|
|
g_dbus_send_message_with_reply flushes pending signals before calling
dbus_connection_send_with_reply so it does not alter the message order
|
|
In some cases the order of the messages is altered when a message is
sent without processing the pending signals first, currently this affect
client_check_order unit test:
/gdbus/client_check_order: **
ERROR:unit/test-gdbus-client.c:795:property_check_order: assertion failed: (g_strcmp0(string, "value1") == 0)
As can be observed the value of the property is not yet updated because the
signal it is still pending, once this fix is applied the test pass:
/gdbus/client_check_order: OK
Note that the flushing only works when g_dbus_send_message is used so
places where dbus_connection_send and other variants are called directly
may still change the order.
|
|
A quick fix on g_dbus_send_message(), if check_signal() fails it returns
FALSE without unreferencing the message as it should. This patch fixes
it.
|
|
If D-Bus ObjectManager is not supported, InterfacesAdded signal
checking needs to be ignored otherwise PropertiesChanged signal
will never be sent.
|
|
If we haven't published an interface yet (i.e. it's in the data->added
list), we should just ignore any property changed indications as the
values for the properties will anyway be part of the InterfacesAdded
signal.
|
|
|
|
The pointer returned by dbus_message_iter_get_signature() must be freed
with dbus_free().
Fixes this memory leak:
==1857== 16 bytes in 1 blocks are definitely lost in loss record 104 of
251
==1857== at 0x402BF52: realloc (in
/usr/lib/valgrind/vgpreload_memcheck-x86-linux.so)
==1857== by 0x415E286: dbus_realloc (in
/lib/i386-linux-gnu/libdbus-1.so.3.5.8)
==1857== by 0x415E70B: ??? (in
/lib/i386-linux-gnu/libdbus-1.so.3.5.8)
==1857== by 0x415F17B: ??? (in
/lib/i386-linux-gnu/libdbus-1.so.3.5.8)
==1857== by 0x414CB33: dbus_message_iter_get_signature (in
/lib/i386-linux-gnu/libdbus-1.so.3.5.8)
==1857== by 0x8053239: properties_set (object.c:899)
==1857== by 0x5FFFFF: ???
==1857==
|
|
|
|
If we received a call to ObjectManager.GetManagedObject we should not
include in the response the interfaces in data->added. This is because
it's not guaranteed that those interfaces will trigger an
InterfacesAdded signal, which is the case if the interface is removed in
the same mainloop iteration.
|
|
The generated introspection is not supposed to be read as is by human,
so there's no point in printing the indentation or writing more code to
use auto-close tags.
If it's desired to read the raw xml file, user can always use other
tools to transform the output such as "xmllint --format".
This also fixes a missing </property> when property is deprecated.
|
|
If message passed to g_dbus_send_message is a signal verify if it is a
valid and there really exists an interface with respective signal name.
|
|
This prevent registering interfaces that are empty or have all members
marked as experiemental.
|
|
This flag can be used to mark properties as experimental, marked
properties are disabled by default and can be enabled by setting
G_DBUS_FLAG_ENABLE_EXPERIMENTAL using g_dbus_set_flags.
|
|
This flag can be used to mark signals as experimental, marked
signals are disabled by default and can be enabled by setting
G_DBUS_FLAG_ENABLE_EXPERIMENTAL using g_dbus_set_flags.
|
|
This flag can be used to mark methods as experimental, marked
methods are disable by default and can be enabled by setting
G_DBUS_FLAG_ENABLE_EXPERIMENTAL using g_dbus_set_flags.
|
|
|
|
|
|
Let each project attach the object manager interface instead of
registering it automatically.
|
|
Delay registering DBus.Properties interface until the moment there are
properties on that path. This is needed for objects that currently don't
expose any property to not export the interface.
|
|
Trivial formatting fix.
|
|
Since these are simple #define strings, we are defining it here
instead of upgrading to D-Bus 1.5 or later.
Log:
CC gdbus/object.o
gdbus/object.c: In function ‘properties_set’:
gdbus/object.c:876:7: error: ‘DBUS_ERROR_UNKNOWN_PROPERTY’ undeclared
(first use in this function)
gdbus/object.c:876:7: note: each undeclared identifier is reported
only once for each function it appears in
gdbus/object.c:881:6: error: ‘DBUS_ERROR_PROPERTY_READ_ONLY’
undeclared (first use in this function)
make[1]: *** [gdbus/object.o] Error 1
make: *** [all] Error 2
|
|
The reply to a DBus.Properties.Set() method call should go through the
same D-Bus connection. Thus remove the DBusConnection parameter from the
following functions:
- g_dbus_pending_property_success()
- g_dbus_pending_property_error_valist()
- g_dbus_pending_property_error()
|
|
If an interface is removed from the root path during the same mainloop
iteration that it was added we need to check for data->added before
doing the check for data->parent == NULL in the remove_interface()
function. Otherwise the added interface doesn't get removed from the
data->added list and will result in accessing freed memory:
==337== Invalid read of size 8
==337== at 0x4F65AFA: dbus_message_iter_append_basic (in /usr/lib64/libdbus-1.so.3.7.1)
==337== by 0x1247B5: append_interface (object.c:556)
==337== by 0x4C8DC5C: g_slist_foreach (gslist.c:840)
==337== by 0x1261F7: process_changes (object.c:594)
==337== by 0x126372: generic_unregister (object.c:997)
==337== by 0x4F69669: ??? (in /usr/lib64/libdbus-1.so.3.7.1)
==337== by 0x4F5CE51: dbus_connection_unregister_object_path (in /usr/lib64/libdbus-1.so.3.7.1)
==337== by 0x125E81: object_path_unref (object.c:1236)
==337== by 0x126136: g_dbus_unregister_interface (object.c:1361)
==337== by 0x14CDF0: service_exit (service.c:581)
==337== by 0x177556: plugin_cleanup (plugin.c:242)
==337== by 0x12221F: main (main.c:559)
==337== Address 0x5bc1550 is 0 bytes inside a block of size 56 free'd
==337== at 0x4A079AE: free (vg_replace_malloc.c:427)
==337== by 0x4C7850E: g_free (gmem.c:252)
==337== by 0x125DB0: remove_interface (object.c:671)
==337== by 0x125E3B: object_path_unref (object.c:1230)
==337== by 0x126136: g_dbus_unregister_interface (object.c:1361)
==337== by 0x14CDF0: service_exit (service.c:581)
==337== by 0x177556: plugin_cleanup (plugin.c:242)
==337== by 0x12221F: main (main.c:559)
|
|
This function can be used to construct custom D-Bus messages containing
the properties for a specific interface on a given path.
|
|
If there's a pending property but its exists() callback returns false
the property should be considered invalidated and included in the
relevant list of the PropertiesChanged signal.
|
|
|
|
Minor fixes to make setter actually work:
- Add propdata in pending_property_set
- Break loop when we are removing propdata from list and we
found it
- in_args and out_args were swapped
- interface and method name arguments were swapped
|
|
If an interface is added and removed on the same mailoop iteration,
ObjectManager would try to send InterfacesAdded signal while running the
idler because the interface was added to data->added list.
This is easily reproduced by forcing an error path in a plugin
registration, like on sap_server_register(), resulting in the following
error:
==11795== Invalid read of size 4
==11795== at 0x496F592: dbus_message_iter_append_basic (dbus-message.c:2598)
==11795== by 0x117B39: append_interface (object.c:554)
==11795== by 0x48955E7: g_slist_foreach (gslist.c:840)
==11795== by 0x11923B: process_changes (object.c:592)
==11795== by 0x11956D: generic_unregister (object.c:980)
==11795== by 0x4973BAC: _dbus_object_tree_unregister_and_unlock (dbus-object-tree.c:516)
==11795== by 0x4965240: dbus_connection_unregister_object_path (dbus-connection.c:5776)
==11795== by 0x1178A5: object_path_unref (object.c:1219)
==11795== by 0x118517: g_dbus_unregister_interface (object.c:1344)
==11795== by 0x19AF5B: sap_exit (sap.c:385)
==11795== by 0x13E9E2: sap_server_register (server.c:1428)
==11795== by 0x13C092: sap_server_probe (manager.c:44)
With this patch we don't send the InterfacesAdded signal, removing it
from data->added while unregistering.
|
|
|
|
This reuse append_properties for GetAll and GetManagedObjects
|
|
This appends the properties and its values when using ObjectManager.
|
|
ObjectManager should be exported only in the root path and list all
the children paths.
|
|
InterfacesAdded and InterfacesRemoved can group all the interfaces
changes together in one message.
|
|
This implements initial support for ObjectManager, it automatically adds
objects to its parents so no action is needed by daemons to get their
objects managed by this interface.
ObjectManager is part of D-Bus spec since revision 0.17:
http://dbus.freedesktop.org/doc/dbus-specification.html#standard-interfaces-objectmanager
|
|
|
|
Contrary to Get() and GetAll(), Set() is asynchronous so we pass an id
to the setter so later it can declare the Set() as successful or
otherwise.
|
|
|
|
|
|
This interface is responsible for handling properties of all objects in
a given path. Right now it only registers itself, doing nothing useful.
A conversion to this new layout will be done by subsequent patches.
org.freedesktop.org.DBus.Properties spec can be found at
http://dbus.freedesktop.org/doc/dbus-specification.html#standard-interfaces-properties
|
|
Besides being more readable this way it avoids going over 80 chars.
|
|
The variable "signature" used in error is not defined and "args" is now
a struct instead of a string.
|
