config SND_SOC_INTEL_SST_TOPLEVEL bool "Intel ASoC SST drivers" default y depends on X86 || COMPILE_TEST select SND_SOC_INTEL_MACH help Intel ASoC SST Platform Drivers. If you have a Intel machine that has an audio controller with a DSP and I2S or DMIC port, then enable this option by saying Y Note that the answer to this question doesn't directly affect the kernel: saying N will just cause the configurator to skip all the questions about Intel SST drivers. if SND_SOC_INTEL_SST_TOPLEVEL config SND_SST_IPC tristate # This option controls the IPC core for HiFi2 platforms config SND_SST_IPC_PCI tristate select SND_SST_IPC # This option controls the PCI-based IPC for HiFi2 platforms # (Medfield, Merrifield). config SND_SST_IPC_ACPI tristate select SND_SST_IPC # This option controls the ACPI-based IPC for HiFi2 platforms # (Baytrail, Cherrytrail) config SND_SOC_INTEL_SST_ACPI tristate # This option controls ACPI-based probing on # Haswell/Broadwell/Baytrail legacy and will be set # when these platforms are enabled config SND_SOC_INTEL_SST tristate config SND_SOC_INTEL_SST_FIRMWARE tristate select DW_DMAC_CORE # This option controls firmware download on # Haswell/Broadwell/Baytrail legacy and will be set # when these platforms are enabled config SND_SOC_INTEL_HASWELL tristate "Haswell/Broadwell Platforms" depends on SND_DMA_SGBUF depends on DMADEVICES && ACPI select SND_SOC_INTEL_SST select SND_SOC_INTEL_SST_ACPI select SND_SOC_INTEL_SST_FIRMWARE select SND_SOC_ACPI_INTEL_MATCH help If you have a Intel Haswell or Broadwell platform connected to an I2S codec, then enable this option by saying Y or m. This is typically used for Chromebooks. This is a recommended option. config SND_SOC_INTEL_BAYTRAIL tristate "Baytrail (legacy) Platforms" depends on DMADEVICES && ACPI && SND_SST_ATOM_HIFI2_PLATFORM=n select SND_SOC_INTEL_SST select SND_SOC_INTEL_SST_ACPI select SND_SOC_INTEL_SST_FIRMWARE select SND_SOC_ACPI_INTEL_MATCH help If you have a Intel Baytrail platform connected to an I2S codec, then enable this option by saying Y or m. This was typically used for Baytrail Chromebooks but this option is now deprecated and is not recommended, use SND_SST_ATOM_HIFI2_PLATFORM instead. config SND_SST_ATOM_HIFI2_PLATFORM tristate select SND_SOC_COMPRESS config SND_SST_ATOM_HIFI2_PLATFORM_PCI tristate "PCI HiFi2 (Merrifield) Platforms" depends on X86 && PCI select SND_SST_IPC_PCI select SND_SST_ATOM_HIFI2_PLATFORM help If you have a Intel Merrifield/Edison platform, then enable this option by saying Y or m. Distros will typically not enable this option: while Merrifield/Edison can run a mainline kernel with limited functionality it will require a firmware file which is not in the standard firmware tree config SND_SST_ATOM_HIFI2_PLATFORM_ACPI tristate "ACPI HiFi2 (Baytrail, Cherrytrail) Platforms" default ACPI depends on X86 && ACPI select SND_SST_IPC_ACPI select SND_SST_ATOM_HIFI2_PLATFORM select SND_SOC_ACPI_INTEL_MATCH select IOSF_MBI help If you have a Intel Baytrail or Cherrytrail platform with an I2S codec, then enable this option by saying Y or m. This is a recommended option config SND_SOC_INTEL_SKYLAKE tristate "All Skylake/SST Platforms" depends on PCI && ACPI select SND_SOC_INTEL_SKL select SND_SOC_INTEL_APL select SND_SOC_INTEL_KBL select SND_SOC_INTEL_GLK select SND_SOC_INTEL_CNL select SND_SOC_INTEL_CFL help This is a backwards-compatible option to select all devices supported by the Intel SST/Skylake driver. This option is no longer recommended and will be deprecated when the SOF driver is introduced. Distributions should explicitly select which platform uses this driver. config SND_SOC_INTEL_SKL tristate "Skylake Platforms" depends on PCI && ACPI select SND_SOC_INTEL_SKYLAKE_FAMILY help If you have a Intel Skylake platform with the DSP enabled in the BIOS then enable this option by saying Y or m. config SND_SOC_INTEL_APL tristate "Broxton/ApolloLake Platforms" depends on PCI && ACPI select SND_SOC_INTEL_SKYLAKE_FAMILY help If you have a Intel Broxton/ApolloLake platform with the DSP enabled in the BIOS then enable this option by saying Y or m. config SND_SOC_INTEL_KBL tristate "Kabylake Platforms" depends on PCI && ACPI select SND_SOC_INTEL_SKYLAKE_FAMILY help If you have a Intel Kabylake platform with the DSP enabled in the BIOS then enable this option by saying Y or m. config SND_SOC_INTEL_GLK tristate "GeminiLake Platforms" depends on PCI && ACPI select SND_SOC_INTEL_SKYLAKE_FAMILY help If you have a Intel GeminiLake platform with the DSP enabled in the BIOS then enable this option by saying Y or m. config SND_SOC_INTEL_CNL tristate "CannonLake/WhiskyLake Platforms" depends on PCI && ACPI select SND_SOC_INTEL_SKYLAKE_FAMILY help If you have a Intel CNL/WHL platform with the DSP enabled in the BIOS then enable this option by saying Y or m. config SND_SOC_INTEL_CFL tristate "CoffeeLake Platforms" depends on PCI && ACPI select SND_SOC_INTEL_SKYLAKE_FAMILY help If you have a Intel CoffeeLake platform with the DSP enabled in the BIOS then enable this option by saying Y or m. config SND_SOC_INTEL_SKYLAKE_FAMILY tristate select SND_SOC_INTEL_SKYLAKE_COMMON if SND_SOC_INTEL_SKYLAKE_FAMILY config SND_SOC_INTEL_SKYLAKE_SSP_CLK tristate config SND_SOC_INTEL_SKYLAKE_HDAUDIO_CODEC bool "HDAudio codec support" help If you have a Intel Skylake/Broxton/ApolloLake/KabyLake/ GeminiLake or CannonLake platform with an HDaudio codec then enable this option by saying Y config SND_SOC_INTEL_SKYLAKE_COMMON tristate select SND_HDA_EXT_CORE select SND_HDA_DSP_LOADER select SND_SOC_TOPOLOGY select SND_SOC_INTEL_SST select SND_SOC_HDAC_HDA if SND_SOC_INTEL_SKYLAKE_HDAUDIO_CODEC select SND_HDA_INTEL_DSP_DETECTION_SKL if SND_SOC_INTEL_SKL select SND_HDA_INTEL_DSP_DETECTION_APL if SND_SOC_INTEL_APL select SND_HDA_INTEL_DSP_DETECTION_KBL if SND_SOC_INTEL_KBL select SND_HDA_INTEL_DSP_DETECTION_GLK if SND_SOC_INTEL_GLK select SND_HDA_INTEL_DSP_DETECTION_CNL if SND_SOC_INTEL_CNL select SND_HDA_INTEL_DSP_DETECTION_CFL if SND_SOC_INTEL_CFL select SND_SOC_ACPI_INTEL_MATCH help If you have a Intel Skylake/Broxton/ApolloLake/KabyLake/ GeminiLake or CannonLake platform with the DSP enabled in the BIOS then enable this option by saying Y or m. endif ## SND_SOC_INTEL_SKYLAKE_FAMILY config SND_SOC_ACPI_INTEL_MATCH tristate select SND_SOC_ACPI if ACPI # this option controls the compilation of ACPI matching tables and # helpers and is not meant to be selected by the user. endif ## SND_SOC_INTEL_SST_TOPLEVEL # ASoC codec drivers source "sound/soc/intel/boards/Kconfig"