// SPDX-License-Identifier: GPL-2.0+ /* * mxuport.c - MOXA UPort series driver * * Copyright (c) 2006 Moxa Technologies Co., Ltd. * Copyright (c) 2013 Andrew Lunn * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * * Supports the following Moxa USB to serial converters: * 2 ports : UPort 1250, UPort 1250I * 4 ports : UPort 1410, UPort 1450, UPort 1450I * 8 ports : UPort 1610-8, UPort 1650-8 * 16 ports : UPort 1610-16, UPort 1650-16 */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include /* Definitions for the vendor ID and device ID */ #define MX_USBSERIAL_VID 0x110A #define MX_UPORT1250_PID 0x1250 #define MX_UPORT1251_PID 0x1251 #define MX_UPORT1410_PID 0x1410 #define MX_UPORT1450_PID 0x1450 #define MX_UPORT1451_PID 0x1451 #define MX_UPORT1618_PID 0x1618 #define MX_UPORT1658_PID 0x1658 #define MX_UPORT1613_PID 0x1613 #define MX_UPORT1653_PID 0x1653 /* Definitions for USB info */ #define HEADER_SIZE 4 #define EVENT_LENGTH 8 #define DOWN_BLOCK_SIZE 64 /* Definitions for firmware info */ #define VER_ADDR_1 0x20 #define VER_ADDR_2 0x24 #define VER_ADDR_3 0x28 /* Definitions for USB vendor request */ #define RQ_VENDOR_NONE 0x00 #define RQ_VENDOR_SET_BAUD 0x01 /* Set baud rate */ #define RQ_VENDOR_SET_LINE 0x02 /* Set line status */ #define RQ_VENDOR_SET_CHARS 0x03 /* Set Xon/Xoff chars */ #define RQ_VENDOR_SET_RTS 0x04 /* Set RTS */ #define RQ_VENDOR_SET_DTR 0x05 /* Set DTR */ #define RQ_VENDOR_SET_XONXOFF 0x06 /* Set auto Xon/Xoff */ #define RQ_VENDOR_SET_RX_HOST_EN 0x07 /* Set RX host enable */ #define RQ_VENDOR_SET_OPEN 0x08 /* Set open/close port */ #define RQ_VENDOR_PURGE 0x09 /* Purge Rx/Tx buffer */ #define RQ_VENDOR_SET_MCR 0x0A /* Set MCR register */ #define RQ_VENDOR_SET_BREAK 0x0B /* Set Break signal */ #define RQ_VENDOR_START_FW_DOWN 0x0C /* Start firmware download */ #define RQ_VENDOR_STOP_FW_DOWN 0x0D /* Stop firmware download */ #define RQ_VENDOR_QUERY_FW_READY 0x0E /* Query if new firmware ready */ #define RQ_VENDOR_SET_FIFO_DISABLE 0x0F /* Set fifo disable */ #define RQ_VENDOR_SET_INTERFACE 0x10 /* Set interface */ #define RQ_VENDOR_SET_HIGH_PERFOR 0x11 /* Set hi-performance */ #define RQ_VENDOR_ERASE_BLOCK 0x12 /* Erase flash block */ #define RQ_VENDOR_WRITE_PAGE 0x13 /* Write flash page */ #define RQ_VENDOR_PREPARE_WRITE 0x14 /* Prepare write flash */ #define RQ_VENDOR_CONFIRM_WRITE 0x15 /* Confirm write flash */ #define RQ_VENDOR_LOCATE 0x16 /* Locate the device */ #define RQ_VENDOR_START_ROM_DOWN 0x17 /* Start firmware download */ #define RQ_VENDOR_ROM_DATA 0x18 /* Rom file data */ #define RQ_VENDOR_STOP_ROM_DOWN 0x19 /* Stop firmware download */ #define RQ_VENDOR_FW_DATA 0x20 /* Firmware data */ #define RQ_VENDOR_RESET_DEVICE 0x23 /* Try to reset the device */ #define RQ_VENDOR_QUERY_FW_CONFIG 0x24 #define RQ_VENDOR_GET_VERSION 0x81 /* Get firmware version */ #define RQ_VENDOR_GET_PAGE 0x82 /* Read flash page */ #define RQ_VENDOR_GET_ROM_PROC 0x83 /* Get ROM process state */ #define RQ_VENDOR_GET_INQUEUE 0x84 /* Data in input buffer */ #define RQ_VENDOR_GET_OUTQUEUE 0x85 /* Data in output buffer */ #define RQ_VENDOR_GET_MSR 0x86 /* Get modem status register */ /* Definitions for UPort event type */ #define UPORT_EVENT_NONE 0 /* None */ #define UPORT_EVENT_TXBUF_THRESHOLD 1 /* Tx buffer threshold */ #define UPORT_EVENT_SEND_NEXT 2 /* Send next */ #define UPORT_EVENT_MSR 3 /* Modem status */ #define UPORT_EVENT_LSR 4 /* Line status */ #define UPORT_EVENT_MCR 5 /* Modem control */ /* Definitions for serial event type */ #define SERIAL_EV_CTS 0x0008 /* CTS changed state */ #define SERIAL_EV_DSR 0x0010 /* DSR changed state */ #define SERIAL_EV_RLSD 0x0020 /* RLSD changed state */ /* Definitions for modem control event type */ #define SERIAL_EV_XOFF 0x40 /* XOFF received */ /* Definitions for line control of communication */ #define MX_WORDLENGTH_5 5 #define MX_WORDLENGTH_6 6 #define MX_WORDLENGTH_7 7 #define MX_WORDLENGTH_8 8 #define MX_PARITY_NONE 0 #define MX_PARITY_ODD 1 #define MX_PARITY_EVEN 2 #define MX_PARITY_MARK 3 #define MX_PARITY_SPACE 4 #define MX_STOP_BITS_1 0 #define MX_STOP_BITS_1_5 1 #define MX_STOP_BITS_2 2 #define MX_RTS_DISABLE 0x0 #define MX_RTS_ENABLE 0x1 #define MX_RTS_HW 0x2 #define MX_RTS_NO_CHANGE 0x3 /* Flag, not valid register value*/ #define MX_INT_RS232 0 #define MX_INT_2W_RS485 1 #define MX_INT_RS422 2 #define MX_INT_4W_RS485 3 /* Definitions for holding reason */ #define MX_WAIT_FOR_CTS 0x0001 #define MX_WAIT_FOR_DSR 0x0002 #define MX_WAIT_FOR_DCD 0x0004 #define MX_WAIT_FOR_XON 0x0008 #define MX_WAIT_FOR_START_TX 0x0010 #define MX_WAIT_FOR_UNTHROTTLE 0x0020 #define MX_WAIT_FOR_LOW_WATER 0x0040 #define MX_WAIT_FOR_SEND_NEXT 0x0080 #define MX_UPORT_2_PORT BIT(0) #define MX_UPORT_4_PORT BIT(1) #define MX_UPORT_8_PORT BIT(2) #define MX_UPORT_16_PORT BIT(3) /* This structure holds all of the local port information */ struct mxuport_port { u8 mcr_state; /* Last MCR state */ u8 msr_state; /* Last MSR state */ struct mutex mutex; /* Protects mcr_state */ spinlock_t spinlock; /* Protects msr_state */ }; /* Table of devices that work with this driver */ static const struct usb_device_id mxuport_idtable[] = { { USB_DEVICE(MX_USBSERIAL_VID, MX_UPORT1250_PID), .driver_info = MX_UPORT_2_PORT }, { USB_DEVICE(MX_USBSERIAL_VID, MX_UPORT1251_PID), .driver_info = MX_UPORT_2_PORT }, { USB_DEVICE(MX_USBSERIAL_VID, MX_UPORT1410_PID), .driver_info = MX_UPORT_4_PORT }, { USB_DEVICE(MX_USBSERIAL_VID, MX_UPORT1450_PID), .driver_info = MX_UPORT_4_PORT }, { USB_DEVICE(MX_USBSERIAL_VID, MX_UPORT1451_PID), .driver_info = MX_UPORT_4_PORT }, { USB_DEVICE(MX_USBSERIAL_VID, MX_UPORT1618_PID), .driver_info = MX_UPORT_8_PORT }, { USB_DEVICE(MX_USBSERIAL_VID, MX_UPORT1658_PID), .driver_info = MX_UPORT_8_PORT }, { USB_DEVICE(MX_USBSERIAL_VID, MX_UPORT1613_PID), .driver_info = MX_UPORT_16_PORT }, { USB_DEVICE(MX_USBSERIAL_VID, MX_UPORT1653_PID), .driver_info = MX_UPORT_16_PORT }, {} /* Terminating entry */ }; MODULE_DEVICE_TABLE(usb, mxuport_idtable); /* * Add a four byte header containing the port number and the number of * bytes of data in the message. Return the number of bytes in the * buffer. */ static int mxuport_prepare_write_buffer(struct usb_serial_port *port, void *dest, size_t size) { u8 *buf = dest; int count; count = kfifo_out_locked(&port->write_fifo, buf + HEADER_SIZE, size - HEADER_SIZE, &port->lock); put_unaligned_be16(port->port_number, buf); put_unaligned_be16(count, buf + 2); dev_dbg(&port->dev, "%s - size %zd count %d\n", __func__, size, count); return count + HEADER_SIZE; } /* Read the given buffer in from the control pipe. */ static int mxuport_recv_ctrl_urb(struct usb_serial *serial, u8 request, u16 value, u16 index, u8 *data, size_t size) { int status; status = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0), request, (USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE), value, index, data, size, USB_CTRL_GET_TIMEOUT); if (status < 0) { dev_err(&serial->interface->dev, "%s - usb_control_msg failed (%d)\n", __func__, status); return status; } if (status != size) { dev_err(&serial->interface->dev, "%s - short read (%d / %zd)\n", __func__, status, size); return -EIO; } return status; } /* Write the given buffer out to the control pipe. */ static int mxuport_send_ctrl_data_urb(struct usb_serial *serial, u8 request, u16 value, u16 index, u8 *data, size_t size) { int status; status = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), request, (USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE), value, index, data, size, USB_CTRL_SET_TIMEOUT); if (status < 0) { dev_err(&serial->interface->dev, "%s - usb_control_msg failed (%d)\n", __func__, status); return status; } if (status != size) { dev_err(&serial->interface->dev, "%s - short write (%d / %zd)\n", __func__, status, size); return -EIO; } return 0; } /* Send a vendor request without any data */ static int mxuport_send_ctrl_urb(struct usb_serial *serial, u8 request, u16 value, u16 index) { return mxuport_send_ctrl_data_urb(serial, request, value, index, NULL, 0); } /* * mxuport_throttle - throttle function of driver * * This function is called by the tty driver when it wants to stop the * data being read from the port. Since all the data comes over one * bulk in endpoint, we cannot stop submitting urbs by setting * port->throttle. Instead tell the device to stop sending us data for * the port. */ static void mxuport_throttle(struct tty_struct *tty) { struct usb_serial_port *port = tty->driver_data; struct usb_serial *serial = port->serial; dev_dbg(&port->dev, "%s\n", __func__); mxuport_send_ctrl_urb(serial, RQ_VENDOR_SET_RX_HOST_EN, 0, port->port_number); } /* * mxuport_unthrottle - unthrottle function of driver * * This function is called by the tty driver when it wants to resume * the data being read from the port. Tell the device it can resume * sending us received data from the port. */ static void mxuport_unthrottle(struct tty_struct *tty) { struct usb_serial_port *port = tty->driver_data; struct usb_serial *serial = port->serial; dev_dbg(&port->dev, "%s\n", __func__); mxuport_send_ctrl_urb(serial, RQ_VENDOR_SET_RX_HOST_EN, 1, port->port_number); } /* * Processes one chunk of data received for a port. Mostly a copy of * usb_serial_generic_process_read_urb(). */ static void mxuport_process_read_urb_data(struct usb_serial_port *port, char *data, int size) { int i; if (!port->port.console || !port->sysrq) { tty_insert_flip_string(&port->port, data, size); } else { for (i = 0; i < size; i++, data++) { if (!usb_serial_handle_sysrq_char(port, *data)) tty_insert_flip_char(&port->port, *data, TTY_NORMAL); } } tty_flip_buffer_push(&port->port); } static void mxuport_msr_event(struct usb_serial_port *port, u8 buf[4]) { struct mxuport_port *mxport = usb_get_serial_port_data(port); u8 rcv_msr_hold = buf[2] & 0xF0; u16 rcv_msr_event = get_unaligned_be16(buf); unsigned long flags; if (rcv_msr_event == 0) return; /* Update MSR status */ spin_lock_irqsave(&mxport->spinlock, flags); dev_dbg(&port->dev, "%s - current MSR status = 0x%x\n", __func__, mxport->msr_state); if (rcv_msr_hold & UART_MSR_CTS) { mxport->msr_state |= UART_MSR_CTS; dev_dbg(&port->dev, "%s - CTS high\n", __func__); } else { mxport->msr_state &= ~UART_MSR_CTS; dev_dbg(&port->dev, "%s - CTS low\n", __func__); } if (rcv_msr_hold & UART_MSR_DSR) { mxport->msr_state |= UART_MSR_DSR; dev_dbg(&port->dev, "%s - DSR high\n", __func__); } else { mxport->msr_state &= ~UART_MSR_DSR; dev_dbg(&port->dev, "%s - DSR low\n", __func__); } if (rcv_msr_hold & UART_MSR_DCD) { mxport->msr_state |= UART_MSR_DCD; dev_dbg(&port->dev, "%s - DCD high\n", __func__); } else { mxport->msr_state &= ~UART_MSR_DCD; dev_dbg(&port->dev, "%s - DCD low\n", __func__); } spin_unlock_irqrestore(&mxport->spinlock, flags); if (rcv_msr_event & (SERIAL_EV_CTS | SERIAL_EV_DSR | SERIAL_EV_RLSD)) { if (rcv_msr_event & SERIAL_EV_CTS) { port->icount.cts++; dev_dbg(&port->dev, "%s - CTS change\n", __func__); } if (rcv_msr_event & SERIAL_EV_DSR) { port->icount.dsr++; dev_dbg(&port->dev, "%s - DSR change\n", __func__); } if (rcv_msr_event & SERIAL_EV_RLSD) { port->icount.dcd++; dev_dbg(&port->dev, "%s - DCD change\n", __func__); } wake_up_interruptible(&port->port.delta_msr_wait); } } static void mxuport_lsr_event(struct usb_serial_port *port, u8 buf[4]) { u8 lsr_event = buf[2]; if (lsr_event & UART_LSR_BI) { port->icount.brk++; dev_dbg(&port->dev, "%s - break error\n", __func__); } if (lsr_event & UART_LSR_FE) { port->icount.frame++; dev_dbg(&port->dev, "%s - frame error\n", __func__); } if (lsr_event & UART_LSR_PE) { port->icount.parity++; dev_dbg(&port->dev, "%s - parity error\n", __func__); } if (lsr_event & UART_LSR_OE) { port->icount.overrun++; dev_dbg(&port->dev, "%s - overrun error\n", __func__); } } /* * When something interesting happens, modem control lines XON/XOFF * etc, the device sends an event. Process these events. */ static void mxuport_process_read_urb_event(struct usb_serial_port *port, u8 buf[4], u32 event) { dev_dbg(&port->dev, "%s - receive event : %04x\n", __func__, event); switch (event) { case UPORT_EVENT_SEND_NEXT: /* * Sent as part of the flow control on device buffers. * Not currently used. */ break; case UPORT_EVENT_MSR: mxuport_msr_event(port, buf); break; case UPORT_EVENT_LSR: mxuport_lsr_event(port, buf); break; case UPORT_EVENT_MCR: /* * Event to indicate a change in XON/XOFF from the * peer. Currently not used. We just continue * sending the device data and it will buffer it if * needed. This event could be used for flow control * between the host and the device. */ break; default: dev_dbg(&port->dev, "Unexpected event\n"); break; } } /* * One URB can contain data for multiple ports. Demultiplex the data, * checking the port exists, is opened and the message is valid. */ static void mxuport_process_read_urb_demux_data(struct urb *urb) { struct usb_serial_port *port = urb->context; struct usb_serial *serial = port->serial; u8 *data = urb->transfer_buffer; u8 *end = data + urb->actual_length; struct usb_serial_port *demux_port; u8 *ch; u16 rcv_port; u16 rcv_len; while (data < end) { if (data + HEADER_SIZE > end) { dev_warn(&port->dev, "%s - message with short header\n", __func__); return; } rcv_port = get_unaligned_be16(data); if (rcv_port >= serial->num_ports) { dev_warn(&port->dev, "%s - message for invalid port\n", __func__); return; } demux_port = serial->port[rcv_port]; rcv_len = get_unaligned_be16(data + 2); if (!rcv_len || data + HEADER_SIZE + rcv_len > end) { dev_warn(&port->dev, "%s - short data\n", __func__); return; } if (tty_port_initialized(&demux_port->port)) { ch = data + HEADER_SIZE; mxuport_process_read_urb_data(demux_port, ch, rcv_len); } else { dev_dbg(&demux_port->dev, "%s - data for closed port\n", __func__); } data += HEADER_SIZE + rcv_len; } } /* * One URB can contain events for multiple ports. Demultiplex the event, * checking the port exists, and is opened. */ static void mxuport_process_read_urb_demux_event(struct urb *urb) { struct usb_serial_port *port = urb->context; struct usb_serial *serial = port->serial; u8 *data = urb->transfer_buffer; u8 *end = data + urb->actual_length; struct usb_serial_port *demux_port; u8 *ch; u16 rcv_port; u16 rcv_event; while (data < end) { if (data + EVENT_LENGTH > end) { dev_warn(&port->dev, "%s - message with short event\n", __func__); return; } rcv_port = get_unaligned_be16(data); if (rcv_port >= serial->num_ports) { dev_warn(&port->dev, "%s - message for invalid port\n", __func__); return; } demux_port = serial->port[rcv_port]; if (tty_port_initialized(&demux_port->port)) { ch = data + HEADER_SIZE; rcv_event = get_unaligned_be16(data + 2); mxuport_process_read_urb_event(demux_port, ch, rcv_event); } else { dev_dbg(&demux_port->dev, "%s - event for closed port\n", __func__); } data += EVENT_LENGTH; } } /* * This is called when we have received data on the bulk in * endpoint. Depending on which port it was received on, it can * contain serial data or events. */ static void mxuport_process_read_urb(struct urb *urb) { struct usb_serial_port *port = urb->context; struct usb_serial *serial = port->serial; if (port == serial->port[0]) mxuport_process_read_urb_demux_data(urb); if (port == serial->port[1]) mxuport_process_read_urb_demux_event(urb); } /* * Ask the device how many bytes it has queued to be sent out. If * there are none, return true. */ static bool mxuport_tx_empty(struct usb_serial_port *port) { struct usb_serial *serial = port->serial; bool is_empty = true; u32 txlen; u8 *len_buf; int err; len_buf = kzalloc(4, GFP_KERNEL); if (!len_buf) goto out; err = mxuport_recv_ctrl_urb(serial, RQ_VENDOR_GET_OUTQUEUE, 0, port->port_number, len_buf, 4); if (err < 0) goto out; txlen = get_unaligned_be32(len_buf); dev_dbg(&port->dev, "%s - tx len = %u\n", __func__, txlen); if (txlen != 0) is_empty = false; out: kfree(len_buf); return is_empty; } static int mxuport_set_mcr(struct usb_serial_port *port, u8 mcr_state) { struct usb_serial *serial = port->serial; int err; dev_dbg(&port->dev, "%s - %02x\n", __func__, mcr_state); err = mxuport_send_ctrl_urb(serial, RQ_VENDOR_SET_MCR, mcr_state, port->port_number); if (err) dev_err(&port->dev, "%s - failed to change MCR\n", __func__); return err; } static int mxuport_set_dtr(struct usb_serial_port *port, int on) { struct mxuport_port *mxport = usb_get_serial_port_data(port); struct usb_serial *serial = port->serial; int err; mutex_lock(&mxport->mutex); err = mxuport_send_ctrl_urb(serial, RQ_VENDOR_SET_DTR, !!on, port->port_number); if (!err) { if (on) mxport->mcr_state |= UART_MCR_DTR; else mxport->mcr_state &= ~UART_MCR_DTR; } mutex_unlock(&mxport->mutex); return err; } static int mxuport_set_rts(struct usb_serial_port *port, u8 state) { struct mxuport_port *mxport = usb_get_serial_port_data(port); struct usb_serial *serial = port->serial; int err; u8 mcr_state; mutex_lock(&mxport->mutex); mcr_state = mxport->mcr_state; switch (state) { case MX_RTS_DISABLE: mcr_state &= ~UART_MCR_RTS; break; case MX_RTS_ENABLE: mcr_state |= UART_MCR_RTS; break; case MX_RTS_HW: /* * Do not update mxport->mcr_state when doing hardware * flow control. */ break; default: /* * Should not happen, but somebody might try passing * MX_RTS_NO_CHANGE, which is not valid. */ err = -EINVAL; goto out; } err = mxuport_send_ctrl_urb(serial, RQ_VENDOR_SET_RTS, state, port->port_number); if (!err) mxport->mcr_state = mcr_state; out: mutex_unlock(&mxport->mutex); return err; } static void mxuport_dtr_rts(struct usb_serial_port *port, int on) { struct mxuport_port *mxport = usb_get_serial_port_data(port); u8 mcr_state; int err; mutex_lock(&mxport->mutex); mcr_state = mxport->mcr_state; if (on) mcr_state |= (UART_MCR_RTS | UART_MCR_DTR); else mcr_state &= ~(UART_MCR_RTS | UART_MCR_DTR); err = mxuport_set_mcr(port, mcr_state); if (!err) mxport->mcr_state = mcr_state; mutex_unlock(&mxport->mutex); } static int mxuport_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear) { struct usb_serial_port *port = tty->driver_data; struct mxuport_port *mxport = usb_get_serial_port_data(port); int err; u8 mcr_state; mutex_lock(&mxport->mutex); mcr_state = mxport->mcr_state; if (set & TIOCM_RTS) mcr_state |= UART_MCR_RTS; if (set & TIOCM_DTR) mcr_state |= UART_MCR_DTR; if (clear & TIOCM_RTS) mcr_state &= ~UART_MCR_RTS; if (clear & TIOCM_DTR) mcr_state &= ~UART_MCR_DTR; err = mxuport_set_mcr(port, mcr_state); if (!err) mxport->mcr_state = mcr_state; mutex_unlock(&mxport->mutex); return err; } static int mxuport_tiocmget(struct tty_struct *tty) { struct mxuport_port *mxport; struct usb_serial_port *port = tty->driver_data; unsigned int result; unsigned long flags; unsigned int msr; unsigned int mcr; mxport = usb_get_serial_port_data(port); mutex_lock(&mxport->mutex); spin_lock_irqsave(&mxport->spinlock, flags); msr = mxport->msr_state; mcr = mxport->mcr_state; spin_unlock_irqrestore(&mxport->spinlock, flags); mutex_unlock(&mxport->mutex); result = (((mcr & UART_MCR_DTR) ? TIOCM_DTR : 0) | /* 0x002 */ ((mcr & UART_MCR_RTS) ? TIOCM_RTS : 0) | /* 0x004 */ ((msr & UART_MSR_CTS) ? TIOCM_CTS : 0) | /* 0x020 */ ((msr & UART_MSR_DCD) ? TIOCM_CAR : 0) | /* 0x040 */ ((msr & UART_MSR_RI) ? TIOCM_RI : 0) | /* 0x080 */ ((msr & UART_MSR_DSR) ? TIOCM_DSR : 0)); /* 0x100 */ dev_dbg(&port->dev, "%s - 0x%04x\n", __func__, result); return result; } static int mxuport_set_termios_flow(struct tty_struct *tty, struct ktermios *old_termios, struct usb_serial_port *port, struct usb_serial *serial) { u8 xon = START_CHAR(tty); u8 xoff = STOP_CHAR(tty); int enable; int err; u8 *buf; u8 rts; buf = kmalloc(2, GFP_KERNEL); if (!buf) return -ENOMEM; /* S/W flow control settings */ if (I_IXOFF(tty) || I_IXON(tty)) { enable = 1; buf[0] = xon; buf[1] = xoff; err = mxuport_send_ctrl_data_urb(serial, RQ_VENDOR_SET_CHARS, 0, port->port_number, buf, 2); if (err) goto out; dev_dbg(&port->dev, "%s - XON = 0x%02x, XOFF = 0x%02x\n", __func__, xon, xoff); } else { enable = 0; } err = mxuport_send_ctrl_urb(serial, RQ_VENDOR_SET_XONXOFF, enable, port->port_number); if (err) goto out; rts = MX_RTS_NO_CHANGE; /* H/W flow control settings */ if (!old_termios || C_CRTSCTS(tty) != (old_termios->c_cflag & CRTSCTS)) { if (C_CRTSCTS(tty)) rts = MX_RTS_HW; else rts = MX_RTS_ENABLE; } if (C_BAUD(tty)) { if (old_termios && (old_termios->c_cflag & CBAUD) == B0) { /* Raise DTR and RTS */ if (C_CRTSCTS(tty)) rts = MX_RTS_HW; else rts = MX_RTS_ENABLE; mxuport_set_dtr(port, 1); } } else { /* Drop DTR and RTS */ rts = MX_RTS_DISABLE; mxuport_set_dtr(port, 0); } if (rts != MX_RTS_NO_CHANGE) err = mxuport_set_rts(port, rts); out: kfree(buf); return err; } static void mxuport_set_termios(struct tty_struct *tty, struct usb_serial_port *port, struct ktermios *old_termios) { struct usb_serial *serial = port->serial; u8 *buf; u8 data_bits; u8 stop_bits; u8 parity; int baud; int err; if (old_termios && !tty_termios_hw_change(&tty->termios, old_termios) && tty->termios.c_iflag == old_termios->c_iflag) { dev_dbg(&port->dev, "%s - nothing to change\n", __func__); return; } buf = kmalloc(4, GFP_KERNEL); if (!buf) return; /* Set data bit of termios */ switch (C_CSIZE(tty)) { case CS5: data_bits = MX_WORDLENGTH_5; break; case CS6: data_bits = MX_WORDLENGTH_6; break; case CS7: data_bits = MX_WORDLENGTH_7; break; case CS8: default: data_bits = MX_WORDLENGTH_8; break; } /* Set parity of termios */ if (C_PARENB(tty)) { if (C_CMSPAR(tty)) { if (C_PARODD(tty)) parity = MX_PARITY_MARK; else parity = MX_PARITY_SPACE; } else { if (C_PARODD(tty)) parity = MX_PARITY_ODD; else parity = MX_PARITY_EVEN; } } else { parity = MX_PARITY_NONE; } /* Set stop bit of termios */ if (C_CSTOPB(tty)) stop_bits = MX_STOP_BITS_2; else stop_bits = MX_STOP_BITS_1; buf[0] = data_bits; buf[1] = parity; buf[2] = stop_bits; buf[3] = 0; err = mxuport_send_ctrl_data_urb(serial, RQ_VENDOR_SET_LINE, 0, port->port_number, buf, 4); if (err) goto out; err = mxuport_set_termios_flow(tty, old_termios, port, serial); if (err) goto out; baud = tty_get_baud_rate(tty); if (!baud) baud = 9600; /* Note: Little Endian */ put_unaligned_le32(baud, buf); err = mxuport_send_ctrl_data_urb(serial, RQ_VENDOR_SET_BAUD, 0, port->port_number, buf, 4); if (err) goto out; dev_dbg(&port->dev, "baud_rate : %d\n", baud); dev_dbg(&port->dev, "data_bits : %d\n", data_bits); dev_dbg(&port->dev, "parity : %d\n", parity); dev_dbg(&port->dev, "stop_bits : %d\n", stop_bits); out: kfree(buf); } /* * Determine how many ports this device has dynamically. It will be * called after the probe() callback is called, but before attach(). */ static int mxuport_calc_num_ports(struct usb_serial *serial, struct usb_serial_endpoints *epds) { unsigned long features = (unsigned long)usb_get_serial_data(serial); int num_ports; int i; if (features & MX_UPORT_2_PORT) { num_ports = 2; } else if (features & MX_UPORT_4_PORT) { num_ports = 4; } else if (features & MX_UPORT_8_PORT) { num_ports = 8; } else if (features & MX_UPORT_16_PORT) { num_ports = 16; } else { dev_warn(&serial->interface->dev, "unknown device, assuming two ports\n"); num_ports = 2; } /* * Setup bulk-out endpoint multiplexing. All ports share the same * bulk-out endpoint. */ BUILD_BUG_ON(ARRAY_SIZE(epds->bulk_out) < 16); for (i = 1; i < num_ports; ++i) epds->bulk_out[i] = epds->bulk_out[0]; epds->num_bulk_out = num_ports; return num_ports; } /* Get the version of the firmware currently running. */ static int mxuport_get_fw_version(struct usb_serial *serial, u32 *version) { u8 *ver_buf; int err; ver_buf = kzalloc(4, GFP_KERNEL); if (!ver_buf) return -ENOMEM; /* Get firmware version from SDRAM */ err = mxuport_recv_ctrl_urb(serial, RQ_VENDOR_GET_VERSION, 0, 0, ver_buf, 4); if (err != 4) { err = -EIO; goto out; } *version = (ver_buf[0] << 16) | (ver_buf[1] << 8) | ver_buf[2]; err = 0; out: kfree(ver_buf); return err; } /* Given a firmware blob, download it to the device. */ static int mxuport_download_fw(struct usb_serial *serial, const struct firmware *fw_p) { u8 *fw_buf; size_t txlen; size_t fwidx; int err; fw_buf = kmalloc(DOWN_BLOCK_SIZE, GFP_KERNEL); if (!fw_buf) return -ENOMEM; dev_dbg(&serial->interface->dev, "Starting firmware download...\n"); err = mxuport_send_ctrl_urb(serial, RQ_VENDOR_START_FW_DOWN, 0, 0); if (err) goto out; fwidx = 0; do { txlen = min_t(size_t, (fw_p->size - fwidx), DOWN_BLOCK_SIZE); memcpy(fw_buf, &fw_p->data[fwidx], txlen); err = mxuport_send_ctrl_data_urb(serial, RQ_VENDOR_FW_DATA, 0, 0, fw_buf, txlen); if (err) { mxuport_send_ctrl_urb(serial, RQ_VENDOR_STOP_FW_DOWN, 0, 0); goto out; } fwidx += txlen; usleep_range(1000, 2000); } while (fwidx < fw_p->size); msleep(1000); err = mxuport_send_ctrl_urb(serial, RQ_VENDOR_STOP_FW_DOWN, 0, 0); if (err) goto out; msleep(1000); err = mxuport_send_ctrl_urb(serial, RQ_VENDOR_QUERY_FW_READY, 0, 0); out: kfree(fw_buf); return err; } static int mxuport_probe(struct usb_serial *serial, const struct usb_device_id *id) { u16 productid = le16_to_cpu(serial->dev->descriptor.idProduct); const struct firmware *fw_p = NULL; u32 version; int local_ver; char buf[32]; int err; /* Load our firmware */ err = mxuport_send_ctrl_urb(serial, RQ_VENDOR_QUERY_FW_CONFIG, 0, 0); if (err) { mxuport_send_ctrl_urb(serial, RQ_VENDOR_RESET_DEVICE, 0, 0); return err; } err = mxuport_get_fw_version(serial, &version); if (err < 0) return err; dev_dbg(&serial->interface->dev, "Device firmware version v%x.%x.%x\n", (version & 0xff0000) >> 16, (version & 0xff00) >> 8, (version & 0xff)); snprintf(buf, sizeof(buf) - 1, "moxa/moxa-%04x.fw", productid); err = request_firmware(&fw_p, buf, &serial->interface->dev); if (err) { dev_warn(&serial->interface->dev, "Firmware %s not found\n", buf); /* Use the firmware already in the device */ err = 0; } else { local_ver = ((fw_p->data[VER_ADDR_1] << 16) | (fw_p->data[VER_ADDR_2] << 8) | fw_p->data[VER_ADDR_3]); dev_dbg(&serial->interface->dev, "Available firmware version v%x.%x.%x\n", fw_p->data[VER_ADDR_1], fw_p->data[VER_ADDR_2], fw_p->data[VER_ADDR_3]); if (local_ver > version) { err = mxuport_download_fw(serial, fw_p); if (err) goto out; err = mxuport_get_fw_version(serial, &version); if (err < 0) goto out; } } dev_info(&serial->interface->dev, "Using device firmware version v%x.%x.%x\n", (version & 0xff0000) >> 16, (version & 0xff00) >> 8, (version & 0xff)); /* * Contains the features of this hardware. Store away for * later use, eg, number of ports. */ usb_set_serial_data(serial, (void *)id->driver_info); out: if (fw_p) release_firmware(fw_p); return err; } static int mxuport_port_probe(struct usb_serial_port *port) { struct usb_serial *serial = port->serial; struct mxuport_port *mxport; int err; mxport = devm_kzalloc(&port->dev, sizeof(struct mxuport_port), GFP_KERNEL); if (!mxport) return -ENOMEM; mutex_init(&mxport->mutex); spin_lock_init(&mxport->spinlock); /* Set the port private data */ usb_set_serial_port_data(port, mxport); /* Set FIFO (Enable) */ err = mxuport_send_ctrl_urb(serial, RQ_VENDOR_SET_FIFO_DISABLE, 0, port->port_number); if (err) return err; /* Set transmission mode (Hi-Performance) */ err = mxuport_send_ctrl_urb(serial, RQ_VENDOR_SET_HIGH_PERFOR, 0, port->port_number); if (err) return err; /* Set interface (RS-232) */ return mxuport_send_ctrl_urb(serial, RQ_VENDOR_SET_INTERFACE, MX_INT_RS232, port->port_number); } static int mxuport_attach(struct usb_serial *serial) { struct usb_serial_port *port0 = serial->port[0]; struct usb_serial_port *port1 = serial->port[1]; int err; /* * All data from the ports is received on the first bulk in * endpoint, with a multiplex header. The second bulk in is * used for events. * * Start to read from the device. */ err = usb_serial_generic_submit_read_urbs(port0, GFP_KERNEL); if (err) return err; err = usb_serial_generic_submit_read_urbs(port1, GFP_KERNEL); if (err) { usb_serial_generic_close(port0); return err; } return 0; } static void mxuport_release(struct usb_serial *serial) { struct usb_serial_port *port0 = serial->port[0]; struct usb_serial_port *port1 = serial->port[1]; usb_serial_generic_close(port1); usb_serial_generic_close(port0); } static int mxuport_open(struct tty_struct *tty, struct usb_serial_port *port) { struct mxuport_port *mxport = usb_get_serial_port_data(port); struct usb_serial *serial = port->serial; int err; /* Set receive host (enable) */ err = mxuport_send_ctrl_urb(serial, RQ_VENDOR_SET_RX_HOST_EN, 1, port->port_number); if (err) return err; err = mxuport_send_ctrl_urb(serial, RQ_VENDOR_SET_OPEN, 1, port->port_number); if (err) { mxuport_send_ctrl_urb(serial, RQ_VENDOR_SET_RX_HOST_EN, 0, port->port_number); return err; } /* Initial port termios */ if (tty) mxuport_set_termios(tty, port, NULL); /* * TODO: use RQ_VENDOR_GET_MSR, once we know what it * returns. */ mxport->msr_state = 0; return err; } static void mxuport_close(struct usb_serial_port *port) { struct usb_serial *serial = port->serial; mxuport_send_ctrl_urb(serial, RQ_VENDOR_SET_OPEN, 0, port->port_number); mxuport_send_ctrl_urb(serial, RQ_VENDOR_SET_RX_HOST_EN, 0, port->port_number); } /* Send a break to the port. */ static void mxuport_break_ctl(struct tty_struct *tty, int break_state) { struct usb_serial_port *port = tty->driver_data; struct usb_serial *serial = port->serial; int enable; if (break_state == -1) { enable = 1; dev_dbg(&port->dev, "%s - sending break\n", __func__); } else { enable = 0; dev_dbg(&port->dev, "%s - clearing break\n", __func__); } mxuport_send_ctrl_urb(serial, RQ_VENDOR_SET_BREAK, enable, port->port_number); } static int mxuport_resume(struct usb_serial *serial) { struct usb_serial_port *port; int c = 0; int i; int r; for (i = 0; i < 2; i++) { port = serial->port[i]; r = usb_serial_generic_submit_read_urbs(port, GFP_NOIO); if (r < 0) c++; } for (i = 0; i < serial->num_ports; i++) { port = serial->port[i]; if (!tty_port_initialized(&port->port)) continue; r = usb_serial_generic_write_start(port, GFP_NOIO); if (r < 0) c++; } return c ? -EIO : 0; } static struct usb_serial_driver mxuport_device = { .driver = { .owner = THIS_MODULE, .name = "mxuport", }, .description = "MOXA UPort", .id_table = mxuport_idtable, .num_bulk_in = 2, .num_bulk_out = 1, .probe = mxuport_probe, .port_probe = mxuport_port_probe, .attach = mxuport_attach, .release = mxuport_release, .calc_num_ports = mxuport_calc_num_ports, .open = mxuport_open, .close = mxuport_close, .set_termios = mxuport_set_termios, .break_ctl = mxuport_break_ctl, .tx_empty = mxuport_tx_empty, .tiocmiwait = usb_serial_generic_tiocmiwait, .get_icount = usb_serial_generic_get_icount, .throttle = mxuport_throttle, .unthrottle = mxuport_unthrottle, .tiocmget = mxuport_tiocmget, .tiocmset = mxuport_tiocmset, .dtr_rts = mxuport_dtr_rts, .process_read_urb = mxuport_process_read_urb, .prepare_write_buffer = mxuport_prepare_write_buffer, .resume = mxuport_resume, }; static struct usb_serial_driver *const serial_drivers[] = { &mxuport_device, NULL }; module_usb_serial_driver(serial_drivers, mxuport_idtable); MODULE_AUTHOR("Andrew Lunn "); MODULE_AUTHOR(""); MODULE_LICENSE("GPL");