/* * Definitions for the FTDI USB Single Port Serial Converter - * known as FTDI_SIO (Serial Input/Output application of the chipset) * * The example I have is known as the USC-1000 which is available from * http://www.dse.co.nz - cat no XH4214 It looks similar to this: * http://www.dansdata.com/usbser.htm but I can't be sure There are other * USC-1000s which don't look like my device though so beware! * * The device is based on the FTDI FT8U100AX chip. It has a DB25 on one side, * USB on the other. * * Thanx to FTDI (http://www.ftdi.co.uk) for so kindly providing details * of the protocol required to talk to the device and ongoing assistence * during development. * * Bill Ryder - bryder@sgi.com formerly of Silicon Graphics, Inc.- wrote the * FTDI_SIO implementation. * * Philipp G�hring - pg@futureware.at - added the Device ID of the USB relais * from Rudolf Gugler * */ #define FTDI_VID 0x0403 /* Vendor Id */ #define FTDI_SIO_PID 0x8372 /* Product Id SIO application of 8U100AX */ #define FTDI_8U232AM_PID 0x6001 /* Similar device to SIO above */ #define FTDI_8U232AM_ALT_PID 0x6006 /* FTDI's alternate PID for above */ #define FTDI_8U2232C_PID 0x6010 /* Dual channel device */ #define FTDI_RELAIS_PID 0xFA10 /* Relais device from Rudolf Gugler */ #define FTDI_NF_RIC_VID 0x0DCD /* Vendor Id */ #define FTDI_NF_RIC_PID 0x0001 /* Product Id */ /* www.canusb.com Lawicel CANUSB device */ #define FTDI_CANUSB_PID 0xFFA8 /* Product Id */ /* AlphaMicro Components AMC-232USB01 device */ #define FTDI_AMC232_PID 0xFF00 /* Product Id */ /* ACT Solutions HomePro ZWave interface (http://www.act-solutions.com/HomePro.htm) */ #define FTDI_ACTZWAVE_PID 0xF2D0 /* www.starting-point-systems.com �Chameleon device */ #define FTDI_MICRO_CHAMELEON_PID 0xCAA0 /* Product Id */ /* www.irtrans.de device */ #define FTDI_IRTRANS_PID 0xFC60 /* Product Id */ /* www.thoughttechnology.com/ TT-USB provide with procomp use ftdi_sio */ #define FTDI_TTUSB_PID 0xFF20 /* Product Id */ /* iPlus device */ #define FTDI_IPLUS_PID 0xD070 /* Product Id */ /* DMX4ALL DMX Interfaces */ #define FTDI_DMX4ALL 0xC850 /* www.crystalfontz.com devices - thanx for providing free devices for evaluation ! */ /* they use the ftdi chipset for the USB interface and the vendor id is the same */ #define FTDI_XF_632_PID 0xFC08 /* 632: 16x2 Character Display */ #define FTDI_XF_634_PID 0xFC09 /* 634: 20x4 Character Display */ #define FTDI_XF_547_PID 0xFC0A /* 547: Two line Display */ #define FTDI_XF_633_PID 0xFC0B /* 633: 16x2 Character Display with Keys */ #define FTDI_XF_631_PID 0xFC0C /* 631: 20x2 Character Display */ #define FTDI_XF_635_PID 0xFC0D /* 635: 20x4 Character Display */ #define FTDI_XF_640_PID 0xFC0E /* 640: Two line Display */ #define FTDI_XF_642_PID 0xFC0F /* 642: Two line Display */ /* Video Networks Limited / Homechoice in the UK use an ftdi-based device for their 1Mb */ /* broadband internet service. The following PID is exhibited by the usb device supplied */ /* (the VID is the standard ftdi vid (FTDI_VID) */ #define FTDI_VNHCPCUSB_D_PID 0xfe38 /* Product Id */ /* * PCDJ use ftdi based dj-controllers. The following PID is for their DAC-2 device * http://www.pcdjhardware.com/DAC2.asp (PID sent by Wouter Paesen) * (the VID is the standard ftdi vid (FTDI_VID) */ #define FTDI_PCDJ_DAC2_PID 0xFA88 /* * The following are the values for the Matrix Orbital LCD displays, * which are the FT232BM ( similar to the 8U232AM ) */ #define FTDI_MTXORB_0_PID 0xFA00 /* Matrix Orbital Product Id */ #define FTDI_MTXORB_1_PID 0xFA01 /* Matrix Orbital Product Id */ #define FTDI_MTXORB_2_PID 0xFA02 /* Matrix Orbital Product Id */ #define FTDI_MTXORB_3_PID 0xFA03 /* Matrix Orbital Product Id */ #define FTDI_MTXORB_4_PID 0xFA04 /* Matrix Orbital Product Id */ #define FTDI_MTXORB_5_PID 0xFA05 /* Matrix Orbital Product Id */ #define FTDI_MTXORB_6_PID 0xFA06 /* Matrix Orbital Product Id */ /* Interbiometrics USB I/O Board */ /* Developed for Interbiometrics by Rudolf Gugler */ #define INTERBIOMETRICS_VID 0x1209 #define INTERBIOMETRICS_IOBOARD_PID 0x1002 #define INTERBIOMETRICS_MINI_IOBOARD_PID 0x1006 /* * The following are the values for the Perle Systems * UltraPort USB serial converters */ #define FTDI_PERLE_ULTRAPORT_PID 0xF0C0 /* Perle UltraPort Product Id */ /* * The following are the values for the Sealevel SeaLINK+ adapters. * (Original list sent by Tuan Hoang. Ian Abbott renamed the macros and * removed some PIDs that don't seem to match any existing products.) */ #define SEALEVEL_VID 0x0c52 /* Sealevel Vendor ID */ #define SEALEVEL_2101_PID 0x2101 /* SeaLINK+232 (2101/2105) */ #define SEALEVEL_2102_PID 0x2102 /* SeaLINK+485 (2102) */ #define SEALEVEL_2103_PID 0x2103 /* SeaLINK+232I (2103) */ #define SEALEVEL_2104_PID 0x2104 /* SeaLINK+485I (2104) */ #define SEALEVEL_2106_PID 0x9020 /* SeaLINK+422 (2106) */ #define SEALEVEL_2201_1_PID 0x2211 /* SeaPORT+2/232 (2201) Port 1 */ #define SEALEVEL_2201_2_PID 0x2221 /* SeaPORT+2/232 (2201) Port 2 */ #define SEALEVEL_2202_1_PID 0x2212 /* SeaPORT+2/485 (2202) Port 1 */ #define SEALEVEL_2202_2_PID 0x2222 /* SeaPORT+2/485 (2202) Port 2 */ #define SEALEVEL_2203_1_PID 0x2213 /* SeaPORT+2 (2203) Port 1 */ #define SEALEVEL_2203_2_PID 0x2223 /* SeaPORT+2 (2203) Port 2 */ #define SEALEVEL_2401_1_PID 0x2411 /* SeaPORT+4/232 (2401) Port 1 */ #define SEALEVEL_2401_2_PID 0x2421 /* SeaPORT+4/232 (2401) Port 2 */ #define SEALEVEL_2401_3_PID 0x2431 /* SeaPORT+4/232 (2401) Port 3 */ #define SEALEVEL_2401_4_PID 0x2441 /* SeaPORT+4/232 (2401) Port 4 */ #define SEALEVEL_2402_1_PID 0x2412 /* SeaPORT+4/485 (2402) Port 1 */ #define SEALEVEL_2402_2_PID 0x2422 /* SeaPORT+4/485 (2402) Port 2 */ #define SEALEVEL_2402_3_PID 0x2432 /* SeaPORT+4/485 (2402) Port 3 */ #define SEALEVEL_2402_4_PID 0x2442 /* SeaPORT+4/485 (2402) Port 4 */ #define SEALEVEL_2403_1_PID 0x2413 /* SeaPORT+4 (2403) Port 1 */ #define SEALEVEL_2403_2_PID 0x2423 /* SeaPORT+4 (2403) Port 2 */ #define SEALEVEL_2403_3_PID 0x2433 /* SeaPORT+4 (2403) Port 3 */ #define SEALEVEL_2403_4_PID 0x2443 /* SeaPORT+4 (2403) Port 4 */ #define SEALEVEL_2801_1_PID 0X2811 /* SeaLINK+8/232 (2801) Port 1 */ #define SEALEVEL_2801_2_PID 0X2821 /* SeaLINK+8/232 (2801) Port 2 */ #define SEALEVEL_2801_3_PID 0X2831 /* SeaLINK+8/232 (2801) Port 3 */ #define SEALEVEL_2801_4_PID 0X2841 /* SeaLINK+8/232 (2801) Port 4 */ #define SEALEVEL_2801_5_PID 0X2851 /* SeaLINK+8/232 (2801) Port 5 */ #define SEALEVEL_2801_6_PID 0X2861 /* SeaLINK+8/232 (2801) Port 6 */ #define SEALEVEL_2801_7_PID 0X2871 /* SeaLINK+8/232 (2801) Port 7 */ #define SEALEVEL_2801_8_PID 0X2881 /* SeaLINK+8/232 (2801) Port 8 */ #define SEALEVEL_2802_1_PID 0X2812 /* SeaLINK+8/485 (2802) Port 1 */ #define SEALEVEL_2802_2_PID 0X2822 /* SeaLINK+8/485 (2802) Port 2 */ #define SEALEVEL_2802_3_PID 0X2832 /* SeaLINK+8/485 (2802) Port 3 */ #define SEALEVEL_2802_4_PID 0X2842 /* SeaLINK+8/485 (2802) Port 4 */ #define SEALEVEL_2802_5_PID 0X2852 /* SeaLINK+8/485 (2802) Port 5 */ #define SEALEVEL_2802_6_PID 0X2862 /* SeaLINK+8/485 (2802) Port 6 */ #define SEALEVEL_2802_7_PID 0X2872 /* SeaLINK+8/485 (2802) Port 7 */ #define SEALEVEL_2802_8_PID 0X2882 /* SeaLINK+8/485 (2802) Port 8 */ #define SEALEVEL_2803_1_PID 0X2813 /* SeaLINK+8 (2803) Port 1 */ #define SEALEVEL_2803_2_PID 0X2823 /* SeaLINK+8 (2803) Port 2 */ #define SEALEVEL_2803_3_PID 0X2833 /* SeaLINK+8 (2803) Port 3 */ #define SEALEVEL_2803_4_PID 0X2843 /* SeaLINK+8 (2803) Port 4 */ #define SEALEVEL_2803_5_PID 0X2853 /* SeaLINK+8 (2803) Port 5 */ #define SEALEVEL_2803_6_PID 0X2863 /* SeaLINK+8 (2803) Port 6 */ #define SEALEVEL_2803_7_PID 0X2873 /* SeaLINK+8 (2803) Port 7 */ #define SEALEVEL_2803_8_PID 0X2883 /* SeaLINK+8 (2803) Port 8 */ /* * The following are the values for two KOBIL chipcard terminals. */ #define KOBIL_VID 0x0d46 /* KOBIL Vendor ID */ #define KOBIL_CONV_B1_PID 0x2020 /* KOBIL Konverter for B1 */ #define KOBIL_CONV_KAAN_PID 0x2021 /* KOBIL_Konverter for KAAN */ /* * Icom ID-1 digital transceiver */ #define ICOM_ID1_VID 0x0C26 #define ICOM_ID1_PID 0x0004 /* * ASK.fr devices */ #define FTDI_ASK_RDR400_PID 0xC991 /* ASK RDR 400 series card reader */ /* * FTDI USB UART chips used in construction projects from the * Elektor Electronics magazine (http://elektor-electronics.co.uk) */ #define ELEKTOR_VID 0x0C7D #define ELEKTOR_FT323R_PID 0x0005 /* RFID-Reader, issue 09-2006 */ /* * DSS-20 Sync Station for Sony Ericsson P800 */ #define FTDI_DSS20_PID 0xFC82 /* * Home Electronics (www.home-electro.com) USB gadgets */ #define FTDI_HE_TIRA1_PID 0xFA78 /* Tira-1 IR transceiver */ /* USB-UIRT - An infrared receiver and transmitter using the 8U232AM chip */ /* http://home.earthlink.net/~jrhees/USBUIRT/index.htm */ #define FTDI_USB_UIRT_PID 0xF850 /* Product Id */ /* TNC-X USB-to-packet-radio adapter, versions prior to 3.0 (DLP module) */ #define FTDI_TNC_X_PID 0xEBE0 /* * ELV USB devices submitted by Christian Abt of ELV (www.elv.de). * All of these devices use FTDI's vendor ID (0x0403). * * The previously included PID for the UO 100 module was incorrect. * In fact, that PID was for ELV's UR 100 USB-RS232 converter (0xFB58). * * Armin Laeuger originally sent the PID for the UM 100 module. */ #define FTDI_ELV_UR100_PID 0xFB58 /* USB-RS232-Umsetzer (UR 100) */ #define FTDI_ELV_UM100_PID 0xFB5A /* USB-Modul UM 100 */ #define FTDI_ELV_UO100_PID 0xFB5B /* USB-Modul UO 100 */ #define FTDI_ELV_ALC8500_PID 0xF06E /* ALC 8500 Expert */ /* Additional ELV PIDs that default to using the FTDI D2XX drivers on * MS Windows, rather than the FTDI Virtual Com Port drivers. * Maybe these will be easier to use with the libftdi/libusb user-space * drivers, or possibly the Comedi drivers in some cases. */ #define FTDI_ELV_CLI7000_PID 0xFB59 /* Computer-Light-Interface (CLI 7000) */ #define FTDI_ELV_PPS7330_PID 0xFB5C /* Processor-Power-Supply (PPS 7330) */ #define FTDI_ELV_TFM100_PID 0xFB5D /* Temperartur-Feuchte Messgeraet (TFM 100) */ #define FTDI_ELV_UDF77_PID 0xFB5E /* USB DCF Funkurh (UDF 77) */ #define FTDI_ELV_UIO88_PID 0xFB5F /* USB-I/O Interface (UIO 88) */ #define FTDI_ELV_UAD8_PID 0xF068 /* USB-AD-Wandler (UAD 8) */ #define FTDI_ELV_UDA7_PID 0xF069 /* USB-DA-Wandler (UDA 7) */ #define FTDI_ELV_USI2_PID 0xF06A /* USB-Schrittmotoren-Interface (USI 2) */ #define FTDI_ELV_T1100_PID 0xF06B /* Thermometer (T 1100) */ #define FTDI_ELV_PCD200_PID 0xF06C /* PC-Datenlogger (PCD 200) */ #define FTDI_ELV_ULA200_PID 0xF06D /* USB-LCD-Ansteuerung (ULA 200) */ #define FTDI_ELV_FHZ1000PC_PID 0xF06F /* FHZ 1000 PC */ #define FTDI_ELV_CSI8_PID 0xE0F0 /* Computer-Schalt-Interface (CSI 8) */ #define FTDI_ELV_EM1000DL_PID 0xE0F1 /* PC-Datenlogger fuer Energiemonitor (EM 1000 DL) */ #define FTDI_ELV_PCK100_PID 0xE0F2 /* PC-Kabeltester (PCK 100) */ #define FTDI_ELV_RFP500_PID 0xE0F3 /* HF-Leistungsmesser (RFP 500) */ #define FTDI_ELV_FS20SIG_PID 0xE0F4 /* Signalgeber (FS 20 SIG) */ #define FTDI_ELV_WS300PC_PID 0xE0F6 /* PC-Wetterstation (WS 300 PC) */ #define FTDI_ELV_FHZ1300PC_PID 0xE0E8 /* FHZ 1300 PC */ #define FTDI_ELV_WS500_PID 0xE0E9 /* PC-Wetterstation (WS 500) */ /* * Definitions for ID TECH (www.idt-net.com) devices */ #define IDTECH_VID 0x0ACD /* ID TECH Vendor ID */ #define IDTECH_IDT1221U_PID 0x0300 /* IDT1221U USB to RS-232 adapter */ /* * Definitions for Omnidirectional Control Technology, Inc. devices */ #define OCT_VID 0x0B39 /* OCT vendor ID */ /* Note: OCT US101 is also rebadged as Dick Smith Electronics (NZ) XH6381 */ /* Also rebadged as Dick Smith Electronics (Aus) XH6451 */ /* Also rebadged as SIIG Inc. model US2308 hardware version 1 */ #define OCT_US101_PID 0x0421 /* OCT US101 USB to RS-232 */ /* an infrared receiver for user access control with IR tags */ #define FTDI_PIEGROUP_PID 0xF208 /* Product Id */ /* * Definitions for Artemis astronomical USB based cameras * Check it at http://www.artemisccd.co.uk/ */ #define FTDI_ARTEMIS_PID 0xDF28 /* All Artemis Cameras */ /* * Definitions for ATIK Instruments astronomical USB based cameras * Check it at http://www.atik-instruments.com/ */ #define FTDI_ATIK_ATK16_PID 0xDF30 /* ATIK ATK-16 Grayscale Camera */ #define FTDI_ATIK_ATK16C_PID 0xDF32 /* ATIK ATK-16C Colour Camera */ #define FTDI_ATIK_ATK16HR_PID 0xDF31 /* ATIK ATK-16HR Grayscale Camera */ #define FTDI_ATIK_ATK16HRC_PID 0xDF33 /* ATIK ATK-16HRC Colour Camera */ /* * Protego product ids */ #define PROTEGO_SPECIAL_1 0xFC70 /* special/unknown device */ #define PROTEGO_R2X0 0xFC71 /* R200-USB TRNG unit (R210, R220, and R230) */ #define PROTEGO_SPECIAL_3 0xFC72 /* special/unknown device */ #define PROTEGO_SPECIAL_4 0xFC73 /* special/unknown device */ /* * Gude Analog- und Digitalsysteme GmbH */ #define FTDI_GUDEADS_E808_PID 0xE808 #define FTDI_GUDEADS_E809_PID 0xE809 #define FTDI_GUDEADS_E80A_PID 0xE80A #define FTDI_GUDEADS_E80B_PID 0xE80B #define FTDI_GUDEADS_E80C_PID 0xE80C #define FTDI_GUDEADS_E80D_PID 0xE80D #define FTDI_GUDEADS_E80E_PID 0xE80E #define FTDI_GUDEADS_E80F_PID 0xE80F #define FTDI_GUDEADS_E888_PID 0xE888 /* Expert ISDN Control USB */ #define FTDI_GUDEADS_E889_PID 0xE889 /* USB RS-232 OptoBridge */ #define FTDI_GUDEADS_E88A_PID 0xE88A #define FTDI_GUDEADS_E88B_PID 0xE88B #define FTDI_GUDEADS_E88C_PID 0xE88C #define FTDI_GUDEADS_E88D_PID 0xE88D #define FTDI_GUDEADS_E88E_PID 0xE88E #define FTDI_GUDEADS_E88F_PID 0xE88F /* * Linx Technologies product ids */ #define LINX_SDMUSBQSS_PID 0xF448 /* Linx SDM-USB-QS-S */ #define LINX_MASTERDEVEL2_PID 0xF449 /* Linx Master Development 2.0 */ #define LINX_FUTURE_0_PID 0xF44A /* Linx future device */ #define LINX_FUTURE_1_PID 0xF44B /* Linx future device */ #define LINX_FUTURE_2_PID 0xF44C /* Linx future device */ /* CCS Inc. ICDU/ICDU40 product ID - the FT232BM is used in an in-circuit-debugger */ /* unit for PIC16's/PIC18's */ #define FTDI_CCSICDU20_0_PID 0xF9D0 #define FTDI_CCSICDU40_1_PID 0xF9D1 #define FTDI_CCSMACHX_2_PID 0xF9D2 /* Inside Accesso contactless reader (http://www.insidefr.com) */ #define INSIDE_ACCESSO 0xFAD0 /* * Intrepid Control Systems (http://www.intrepidcs.com/) ValueCAN and NeoVI */ #define INTREPID_VID 0x093C #define INTREPID_VALUECAN_PID 0x0601 #define INTREPID_NEOVI_PID 0x0701 /* * Falcom Wireless Communications GmbH */ #define FALCOM_VID 0x0F94 /* Vendor Id */ #define FALCOM_TWIST_PID 0x0001 /* Falcom Twist USB GPRS modem */ #define FALCOM_SAMBA_PID 0x0005 /* Falcom Samba USB GPRS modem */ /* * SUUNTO product ids */ #define FTDI_SUUNTO_SPORTS_PID 0xF680 /* Suunto Sports instrument */ /* * Definitions for B&B Electronics products. */ #define BANDB_VID 0x0856 /* B&B Electronics Vendor ID */ #define BANDB_USOTL4_PID 0xAC01 /* USOTL4 Isolated RS-485 Converter */ #define BANDB_USTL4_PID 0xAC02 /* USTL4 RS-485 Converter */ #define BANDB_USO9ML2_PID 0xAC03 /* USO9ML2 Isolated RS-232 Converter */ /* * RM Michaelides CANview USB (http://www.rmcan.com) * CAN fieldbus interface adapter, added by port GmbH www.port.de) * Ian Abbott changed the macro names for consistency. */ #define FTDI_RM_CANVIEW_PID 0xfd60 /* Product Id */ /* * EVER Eco Pro UPS (http://www.ever.com.pl/) */ #define EVER_ECO_PRO_CDS 0xe520 /* RS-232 converter */ /* * 4N-GALAXY.DE PIDs for CAN-USB, USB-RS232, USB-RS422, USB-RS485, * USB-TTY activ, USB-TTY passiv. Some PIDs are used by several devices * and I'm not entirely sure which are used by which. */ #define FTDI_4N_GALAXY_DE_0_PID 0x8372 #define FTDI_4N_GALAXY_DE_1_PID 0xF3C0 #define FTDI_4N_GALAXY_DE_2_PID 0xF3C1 /* * Mobility Electronics products. */ #define MOBILITY_VID 0x1342 #define MOBILITY_USB_SERIAL_PID 0x0202 /* EasiDock USB 200 serial */ /* * microHAM product IDs (http://www.microham.com). * Submitted by Justin Burket (KL1RL) <zorton@jtan.com> * and Mike Studer (K6EEP) <k6eep@hamsoftware.org>. * Ian Abbott <abbotti@mev.co.uk> added a few more from the driver INF file. */ #define FTDI_MHAM_KW_PID 0xEEE8 /* USB-KW interface */ #define FTDI_MHAM_YS_PID 0xEEE9 /* USB-YS interface */ #define FTDI_MHAM_Y6_PID 0xEEEA /* USB-Y6 interface */ #define FTDI_MHAM_Y8_PID 0xEEEB /* USB-Y8 interface */ #define FTDI_MHAM_IC_PID 0xEEEC /* USB-IC interface */ #define FTDI_MHAM_DB9_PID 0xEEED /* USB-DB9 interface */ #define FTDI_MHAM_RS232_PID 0xEEEE /* USB-RS232 interface */ #define FTDI_MHAM_Y9_PID 0xEEEF /* USB-Y9 interface */ /* * Active Robots product ids. */ #define FTDI_ACTIVE_ROBOTS_PID 0xE548 /* USB comms board */ /* * Xsens Technologies BV products (http://www.xsens.com). */ #define XSENS_CONVERTER_0_PID 0xD388 #define XSENS_CONVERTER_1_PID 0xD389 #define XSENS_CONVERTER_2_PID 0xD38A #define XSENS_CONVERTER_3_PID 0xD38B #define XSENS_CONVERTER_4_PID 0xD38C #define XSENS_CONVERTER_5_PID 0xD38D #define XSENS_CONVERTER_6_PID 0xD38E #define XSENS_CONVERTER_7_PID 0xD38F /* * Teratronik product ids. * Submitted by O. W�lfelschneider. */ #define FTDI_TERATRONIK_VCP_PID 0xEC88 /* Teratronik device (preferring VCP driver on windows) */ #define FTDI_TERATRONIK_D2XX_PID 0xEC89 /* Teratronik device (preferring D2XX driver on windows) */ /* * Evolution Robotics products (http://www.evolution.com/). * Submitted by Shawn M. Lavelle. */ #define EVOLUTION_VID 0xDEEE /* Vendor ID */ #define EVOLUTION_ER1_PID 0x0300 /* ER1 Control Module */ /* Pyramid Computer GmbH */ #define FTDI_PYRAMID_PID 0xE6C8 /* Pyramid Appliance Display */ /* * Posiflex inc retail equipment (http://www.posiflex.com.tw) */ #define POSIFLEX_VID 0x0d3a /* Vendor ID */ #define POSIFLEX_PP7000_PID 0x0300 /* PP-7000II thermal printer */ /* * Westrex International devices submitted by Cory Lee */ #define FTDI_WESTREX_MODEL_777_PID 0xDC00 /* Model 777 */ #define FTDI_WESTREX_MODEL_8900F_PID 0xDC01 /* Model 8900F */ /* * RR-CirKits LocoBuffer USB (http://www.rr-cirkits.com) */ #define FTDI_RRCIRKITS_LOCOBUFFER_PID 0xc7d0 /* LocoBuffer USB */ /* * Eclo (http://www.eclo.pt/) product IDs. * PID 0xEA90 submitted by Martin Grill. */ #define FTDI_ECLO_COM_1WIRE_PID 0xEA90 /* COM to 1-Wire USB adaptor */ /* * Papouch products (http://www.papouch.com/) * Submitted by Folkert van Heusden */ #define PAPOUCH_VID 0x5050 /* Vendor ID */ #define PAPOUCH_TMU_PID 0x0400 /* TMU USB Thermometer */ /* * ACG Identification Technologies GmbH products (http://www.acg.de/). * Submitted by anton -at- goto10 -dot- org. */ #define FTDI_ACG_HFDUAL_PID 0xDD20 /* HF Dual ISO Reader (RFID) */ /* * Yost Engineering, Inc. products (www.yostengineering.com). * PID 0xE050 submitted by Aaron Prose. */ #define FTDI_YEI_SERVOCENTER31_PID 0xE050 /* YEI ServoCenter3.1 USB */ /* * ThorLabs USB motor drivers */ #define FTDI_THORLABS_PID 0xfaf0 /* ThorLabs USB motor drivers */ /* * Testo products (http://www.testo.com/) * Submitted by Colin Leroy */ #define TESTO_VID 0x128D #define TESTO_USB_INTERFACE_PID 0x0001 /* * Gamma Scout (http://gamma-scout.com/). Submitted by rsc@runtux.com. */ #define FTDI_GAMMA_SCOUT_PID 0xD678 /* Gamma Scout online */ /* * Tactrix OpenPort (ECU) devices. * OpenPort 1.3M submitted by Donour Sizemore. * OpenPort 1.3S and 1.3U submitted by Ian Abbott. */ #define FTDI_TACTRIX_OPENPORT_13M_PID 0xCC48 /* OpenPort 1.3 Mitsubishi */ #define FTDI_TACTRIX_OPENPORT_13S_PID 0xCC49 /* OpenPort 1.3 Subaru */ #define FTDI_TACTRIX_OPENPORT_13U_PID 0xCC4A /* OpenPort 1.3 Universal */ /* Commands */ #define FTDI_SIO_RESET 0 /* Reset the port */ #define FTDI_SIO_MODEM_CTRL 1 /* Set the modem control register */ #define FTDI_SIO_SET_FLOW_CTRL 2 /* Set flow control register */ #define FTDI_SIO_SET_BAUD_RATE 3 /* Set baud rate */ #define FTDI_SIO_SET_DATA 4 /* Set the data characteristics of the port */ #define FTDI_SIO_GET_MODEM_STATUS 5 /* Retrieve current value of modern status register */ #define FTDI_SIO_SET_EVENT_CHAR 6 /* Set the event character */ #define FTDI_SIO_SET_ERROR_CHAR 7 /* Set the error character */ #define FTDI_SIO_SET_LATENCY_TIMER 9 /* Set the latency timer */ #define FTDI_SIO_GET_LATENCY_TIMER 10 /* Get the latency timer */ /* * BmRequestType: 1100 0000b * bRequest: FTDI_E2_READ * wValue: 0 * wIndex: Address of word to read * wLength: 2 * Data: Will return a word of data from E2Address * */ /* Port Identifier Table */ #define PIT_DEFAULT 0 /* SIOA */ #define PIT_SIOA 1 /* SIOA */ /* The device this driver is tested with one has only one port */ #define PIT_SIOB 2 /* SIOB */ #define PIT_PARALLEL 3 /* Parallel */ /* FTDI_SIO_RESET */ #define FTDI_SIO_RESET_REQUEST FTDI_SIO_RESET #define FTDI_SIO_RESET_REQUEST_TYPE 0x40 #define FTDI_SIO_RESET_SIO 0 #define FTDI_SIO_RESET_PURGE_RX 1 #define FTDI_SIO_RESET_PURGE_TX 2 /* * BmRequestType: 0100 0000B * bRequest: FTDI_SIO_RESET * wValue: Control Value * 0 = Reset SIO * 1 = Purge RX buffer * 2 = Purge TX buffer * wIndex: Port * wLength: 0 * Data: None * * The Reset SIO command has this effect: * * Sets flow control set to 'none' * Event char = $0D * Event trigger = disabled * Purge RX buffer * Purge TX buffer * Clear DTR * Clear RTS * baud and data format not reset * * The Purge RX and TX buffer commands affect nothing except the buffers * */ /* FTDI_SIO_SET_BAUDRATE */ #define FTDI_SIO_SET_BAUDRATE_REQUEST_TYPE 0x40 #define FTDI_SIO_SET_BAUDRATE_REQUEST 3 /* * BmRequestType: 0100 0000B * bRequest: FTDI_SIO_SET_BAUDRATE * wValue: BaudDivisor value - see below * wIndex: Port * wLength: 0 * Data: None * The BaudDivisor values are calculated as follows: * - BaseClock is either 12000000 or 48000000 depending on the device. FIXME: I wish * I knew how to detect old chips to select proper base clock! * - BaudDivisor is a fixed point number encoded in a funny way. * (--WRONG WAY OF THINKING--) * BaudDivisor is a fixed point number encoded with following bit weighs: * (-2)(-1)(13..0). It is a radical with a denominator of 4, so values * end with 0.0 (00...), 0.25 (10...), 0.5 (01...), and 0.75 (11...). * (--THE REALITY--) * The both-bits-set has quite different meaning from 0.75 - the chip designers * have decided it to mean 0.125 instead of 0.75. * This info looked up in FTDI application note "FT8U232 DEVICES \ Data Rates * and Flow Control Consideration for USB to RS232". * - BaudDivisor = (BaseClock / 16) / BaudRate, where the (=) operation should * automagically re-encode the resulting value to take fractions into consideration. * As all values are integers, some bit twiddling is in order: * BaudDivisor = (BaseClock / 16 / BaudRate) | * (((BaseClock / 2 / BaudRate) & 4) ? 0x4000 // 0.5 * : ((BaseClock / 2 / BaudRate) & 2) ? 0x8000 // 0.25 * : ((BaseClock / 2 / BaudRate) & 1) ? 0xc000 // 0.125 * : 0) * * For the FT232BM, a 17th divisor bit was introduced to encode the multiples * of 0.125 missing from the FT8U232AM. Bits 16 to 14 are coded as follows * (the first four codes are the same as for the FT8U232AM, where bit 16 is * always 0): * 000 - add .000 to divisor * 001 - add .500 to divisor * 010 - add .250 to divisor * 011 - add .125 to divisor * 100 - add .375 to divisor * 101 - add .625 to divisor * 110 - add .750 to divisor * 111 - add .875 to divisor * Bits 15 to 0 of the 17-bit divisor are placed in the urb value. Bit 16 is * placed in bit 0 of the urb index. * * Note that there are a couple of special cases to support the highest baud * rates. If the calculated divisor value is 1, this needs to be replaced with * 0. Additionally for the FT232BM, if the calculated divisor value is 0x4001 * (1.5), this needs to be replaced with 0x0001 (1) (but this divisor value is * not supported by the FT8U232AM). */ typedef enum { SIO = 1, FT8U232AM = 2, FT232BM = 3, FT2232C = 4, } ftdi_chip_type_t; typedef enum { ftdi_sio_b300 = 0, ftdi_sio_b600 = 1, ftdi_sio_b1200 = 2, ftdi_sio_b2400 = 3, ftdi_sio_b4800 = 4, ftdi_sio_b9600 = 5, ftdi_sio_b19200 = 6, ftdi_sio_b38400 = 7, ftdi_sio_b57600 = 8, ftdi_sio_b115200 = 9 } FTDI_SIO_baudrate_t ; /* * The ftdi_8U232AM_xxMHz_byyy constants have been removed. The encoded divisor values * are calculated internally. */ #define FTDI_SIO_SET_DATA_REQUEST FTDI_SIO_SET_DATA #define FTDI_SIO_SET_DATA_REQUEST_TYPE 0x40 #define FTDI_SIO_SET_DATA_PARITY_NONE (0x0 << 8 ) #define FTDI_SIO_SET_DATA_PARITY_ODD (0x1 << 8 ) #define FTDI_SIO_SET_DATA_PARITY_EVEN (0x2 << 8 ) #define FTDI_SIO_SET_DATA_PARITY_MARK (0x3 << 8 ) #define FTDI_SIO_SET_DATA_PARITY_SPACE (0x4 << 8 ) #define FTDI_SIO_SET_DATA_STOP_BITS_1 (0x0 << 11 ) #define FTDI_SIO_SET_DATA_STOP_BITS_15 (0x1 << 11 ) #define FTDI_SIO_SET_DATA_STOP_BITS_2 (0x2 << 11 ) #define FTDI_SIO_SET_BREAK (0x1 << 14) /* FTDI_SIO_SET_DATA */ /* * BmRequestType: 0100 0000B * bRequest: FTDI_SIO_SET_DATA * wValue: Data characteristics (see below) * wIndex: Port * wLength: 0 * Data: No * * Data characteristics * * B0..7 Number of data bits * B8..10 Parity * 0 = None * 1 = Odd * 2 = Even * 3 = Mark * 4 = Space * B11..13 Stop Bits * 0 = 1 * 1 = 1.5 * 2 = 2 * B14 * 1 = TX ON (break) * 0 = TX OFF (normal state) * B15 Reserved * */ /* FTDI_SIO_MODEM_CTRL */ #define FTDI_SIO_SET_MODEM_CTRL_REQUEST_TYPE 0x40 #define FTDI_SIO_SET_MODEM_CTRL_REQUEST FTDI_SIO_MODEM_CTRL /* * BmRequestType: 0100 0000B * bRequest: FTDI_SIO_MODEM_CTRL * wValue: ControlValue (see below) * wIndex: Port * wLength: 0 * Data: None * * NOTE: If the device is in RTS/CTS flow control, the RTS set by this * command will be IGNORED without an error being returned * Also - you can not set DTR and RTS with one control message */ #define FTDI_SIO_SET_DTR_MASK 0x1 #define FTDI_SIO_SET_DTR_HIGH ( 1 | ( FTDI_SIO_SET_DTR_MASK << 8)) #define FTDI_SIO_SET_DTR_LOW ( 0 | ( FTDI_SIO_SET_DTR_MASK << 8)) #define FTDI_SIO_SET_RTS_MASK 0x2 #define FTDI_SIO_SET_RTS_HIGH ( 2 | ( FTDI_SIO_SET_RTS_MASK << 8 )) #define FTDI_SIO_SET_RTS_LOW ( 0 | ( FTDI_SIO_SET_RTS_MASK << 8 )) /* * ControlValue * B0 DTR state * 0 = reset * 1 = set * B1 RTS state * 0 = reset * 1 = set * B2..7 Reserved * B8 DTR state enable * 0 = ignore * 1 = use DTR state * B9 RTS state enable * 0 = ignore * 1 = use RTS state * B10..15 Reserved */ /* FTDI_SIO_SET_FLOW_CTRL */ #define FTDI_SIO_SET_FLOW_CTRL_REQUEST_TYPE 0x40 #define FTDI_SIO_SET_FLOW_CTRL_REQUEST FTDI_SIO_SET_FLOW_CTRL #define FTDI_SIO_DISABLE_FLOW_CTRL 0x0 #define FTDI_SIO_RTS_CTS_HS (0x1 << 8) #define FTDI_SIO_DTR_DSR_HS (0x2 << 8) #define FTDI_SIO_XON_XOFF_HS (0x4 << 8) /* * BmRequestType: 0100 0000b * bRequest: FTDI_SIO_SET_FLOW_CTRL * wValue: Xoff/Xon * wIndex: Protocol/Port - hIndex is protocl / lIndex is port * wLength: 0 * Data: None * * hIndex protocol is: * B0 Output handshaking using RTS/CTS * 0 = disabled * 1 = enabled * B1 Output handshaking using DTR/DSR * 0 = disabled * 1 = enabled * B2 Xon/Xoff handshaking * 0 = disabled * 1 = enabled * * A value of zero in the hIndex field disables handshaking * * If Xon/Xoff handshaking is specified, the hValue field should contain the XOFF character * and the lValue field contains the XON character. */ /* * FTDI_SIO_GET_LATENCY_TIMER * * Set the timeout interval. The FTDI collects data from the slave * device, transmitting it to the host when either A) 62 bytes are * received, or B) the timeout interval has elapsed and the buffer * contains at least 1 byte. Setting this value to a small number * can dramatically improve performance for applications which send * small packets, since the default value is 16ms. */ #define FTDI_SIO_GET_LATENCY_TIMER_REQUEST FTDI_SIO_GET_LATENCY_TIMER #define FTDI_SIO_GET_LATENCY_TIMER_REQUEST_TYPE 0xC0 /* * BmRequestType: 1100 0000b * bRequest: FTDI_SIO_GET_LATENCY_TIMER * wValue: 0 * wIndex: Port * wLength: 0 * Data: latency (on return) */ /* * FTDI_SIO_SET_LATENCY_TIMER * * Set the timeout interval. The FTDI collects data from the slave * device, transmitting it to the host when either A) 62 bytes are * received, or B) the timeout interval has elapsed and the buffer * contains at least 1 byte. Setting this value to a small number * can dramatically improve performance for applications which send * small packets, since the default value is 16ms. */ #define FTDI_SIO_SET_LATENCY_TIMER_REQUEST FTDI_SIO_SET_LATENCY_TIMER #define FTDI_SIO_SET_LATENCY_TIMER_REQUEST_TYPE 0x40 /* * BmRequestType: 0100 0000b * bRequest: FTDI_SIO_SET_LATENCY_TIMER * wValue: Latency (milliseconds) * wIndex: Port * wLength: 0 * Data: None * * wValue: * B0..7 Latency timer * B8..15 0 * */ /* * FTDI_SIO_SET_EVENT_CHAR * * Set the special event character for the specified communications port. * If the device sees this character it will immediately return the * data read so far - rather than wait 40ms or until 62 bytes are read * which is what normally happens. */ #define FTDI_SIO_SET_EVENT_CHAR_REQUEST FTDI_SIO_SET_EVENT_CHAR #define FTDI_SIO_SET_EVENT_CHAR_REQUEST_TYPE 0x40 /* * BmRequestType: 0100 0000b * bRequest: FTDI_SIO_SET_EVENT_CHAR * wValue: EventChar * wIndex: Port * wLength: 0 * Data: None * * wValue: * B0..7 Event Character * B8 Event Character Processing * 0 = disabled * 1 = enabled * B9..15 Reserved * */ /* FTDI_SIO_SET_ERROR_CHAR */ /* Set the parity error replacement character for the specified communications port */ /* * BmRequestType: 0100 0000b * bRequest: FTDI_SIO_SET_EVENT_CHAR * wValue: Error Char * wIndex: Port * wLength: 0 * Data: None * *Error Char * B0..7 Error Character * B8 Error Character Processing * 0 = disabled * 1 = enabled * B9..15 Reserved * */ /* FTDI_SIO_GET_MODEM_STATUS */ /* Retrieve the current value of the modem status register */ #define FTDI_SIO_GET_MODEM_STATUS_REQUEST_TYPE 0xc0 #define FTDI_SIO_GET_MODEM_STATUS_REQUEST FTDI_SIO_GET_MODEM_STATUS #define FTDI_SIO_CTS_MASK 0x10 #define FTDI_SIO_DSR_MASK 0x20 #define FTDI_SIO_RI_MASK 0x40 #define FTDI_SIO_RLSD_MASK 0x80 /* * BmRequestType: 1100 0000b * bRequest: FTDI_SIO_GET_MODEM_STATUS * wValue: zero * wIndex: Port * wLength: 1 * Data: Status * * One byte of data is returned * B0..3 0 * B4 CTS * 0 = inactive * 1 = active * B5 DSR * 0 = inactive * 1 = active * B6 Ring Indicator (RI) * 0 = inactive * 1 = active * B7 Receive Line Signal Detect (RLSD) * 0 = inactive * 1 = active */ /* Descriptors returned by the device * * Device Descriptor * * Offset Field Size Value Description * 0 bLength 1 0x12 Size of descriptor in bytes * 1 bDescriptorType 1 0x01 DEVICE Descriptor Type * 2 bcdUSB 2 0x0110 USB Spec Release Number * 4 bDeviceClass 1 0x00 Class Code * 5 bDeviceSubClass 1 0x00 SubClass Code * 6 bDeviceProtocol 1 0x00 Protocol Code * 7 bMaxPacketSize0 1 0x08 Maximum packet size for endpoint 0 * 8 idVendor 2 0x0403 Vendor ID * 10 idProduct 2 0x8372 Product ID (FTDI_SIO_PID) * 12 bcdDevice 2 0x0001 Device release number * 14 iManufacturer 1 0x01 Index of man. string desc * 15 iProduct 1 0x02 Index of prod string desc * 16 iSerialNumber 1 0x02 Index of serial nmr string desc * 17 bNumConfigurations 1 0x01 Number of possible configurations * * Configuration Descriptor * * Offset Field Size Value * 0 bLength 1 0x09 Size of descriptor in bytes * 1 bDescriptorType 1 0x02 CONFIGURATION Descriptor Type * 2 wTotalLength 2 0x0020 Total length of data * 4 bNumInterfaces 1 0x01 Number of interfaces supported * 5 bConfigurationValue 1 0x01 Argument for SetCOnfiguration() req * 6 iConfiguration 1 0x02 Index of config string descriptor * 7 bmAttributes 1 0x20 Config characteristics Remote Wakeup * 8 MaxPower 1 0x1E Max power consumption * * Interface Descriptor * * Offset Field Size Value * 0 bLength 1 0x09 Size of descriptor in bytes * 1 bDescriptorType 1 0x04 INTERFACE Descriptor Type * 2 bInterfaceNumber 1 0x00 Number of interface * 3 bAlternateSetting 1 0x00 Value used to select alternate * 4 bNumEndpoints 1 0x02 Number of endpoints * 5 bInterfaceClass 1 0xFF Class Code * 6 bInterfaceSubClass 1 0xFF Subclass Code * 7 bInterfaceProtocol 1 0xFF Protocol Code * 8 iInterface 1 0x02 Index of interface string description * * IN Endpoint Descriptor * * Offset Field Size Value * 0 bLength 1 0x07 Size of descriptor in bytes * 1 bDescriptorType 1 0x05 ENDPOINT descriptor type * 2 bEndpointAddress 1 0x82 Address of endpoint * 3 bmAttributes 1 0x02 Endpoint attributes - Bulk * 4 bNumEndpoints 2 0x0040 maximum packet size * 5 bInterval 1 0x00 Interval for polling endpoint * * OUT Endpoint Descriptor * * Offset Field Size Value * 0 bLength 1 0x07 Size of descriptor in bytes * 1 bDescriptorType 1 0x05 ENDPOINT descriptor type * 2 bEndpointAddress 1 0x02 Address of endpoint * 3 bmAttributes 1 0x02 Endpoint attributes - Bulk * 4 bNumEndpoints 2 0x0040 maximum packet size * 5 bInterval 1 0x00 Interval for polling endpoint * * DATA FORMAT * * IN Endpoint * * The device reserves the first two bytes of data on this endpoint to contain the current * values of the modem and line status registers. In the absence of data, the device * generates a message consisting of these two status bytes every 40 ms * * Byte 0: Modem Status * * Offset Description * B0 Reserved - must be 1 * B1 Reserved - must be 0 * B2 Reserved - must be 0 * B3 Reserved - must be 0 * B4 Clear to Send (CTS) * B5 Data Set Ready (DSR) * B6 Ring Indicator (RI) * B7 Receive Line Signal Detect (RLSD) * * Byte 1: Line Status * * Offset Description * B0 Data Ready (DR) * B1 Overrun Error (OE) * B2 Parity Error (PE) * B3 Framing Error (FE) * B4 Break Interrupt (BI) * B5 Transmitter Holding Register (THRE) * B6 Transmitter Empty (TEMT) * B7 Error in RCVR FIFO * */ #define FTDI_RS0_CTS (1 << 4) #define FTDI_RS0_DSR (1 << 5) #define FTDI_RS0_RI (1 << 6) #define FTDI_RS0_RLSD (1 << 7) #define FTDI_RS_DR 1 #define FTDI_RS_OE (1<<1) #define FTDI_RS_PE (1<<2) #define FTDI_RS_FE (1<<3) #define FTDI_RS_BI (1<<4) #define FTDI_RS_THRE (1<<5) #define FTDI_RS_TEMT (1<<6) #define FTDI_RS_FIFO (1<<7) /* * OUT Endpoint * * This device reserves the first bytes of data on this endpoint contain the length * and port identifier of the message. For the FTDI USB Serial converter the port * identifier is always 1. * * Byte 0: Line Status * * Offset Description * B0 Reserved - must be 1 * B1 Reserved - must be 0 * B2..7 Length of message - (not including Byte 0) * */