// SPDX-License-Identifier: GPL-2.0 /* * Copyright 2020 NXP. * * Author: Anson Huang */ #include #include #include #include #include #include #include #include #include #include #include #include "thermal_core.h" #include "thermal_hwmon.h" #define TER 0x0 /* TMU enable */ #define TPS 0x4 #define TRITSR 0x20 /* TMU immediate temp */ /* TMU calibration data registers */ #define TASR 0x28 #define TASR_BUF_SLOPE_MASK GENMASK(19, 16) #define TASR_BUF_VREF_MASK GENMASK(4, 0) /* TMU_V1 */ #define TASR_BUF_VERF_SEL_MASK GENMASK(1, 0) /* TMU_V2 */ #define TCALIV(n) (0x30 + ((n) * 4)) #define TCALIV_EN BIT(31) #define TCALIV_HR_MASK GENMASK(23, 16) /* TMU_V1 */ #define TCALIV_RT_MASK GENMASK(7, 0) /* TMU_V1 */ #define TCALIV_SNSR105C_MASK GENMASK(27, 16) /* TMU_V2 */ #define TCALIV_SNSR25C_MASK GENMASK(11, 0) /* TMU_V2 */ #define TRIM 0x3c #define TRIM_BJT_CUR_MASK GENMASK(23, 20) #define TRIM_BGR_MASK GENMASK(31, 28) #define TRIM_VLSB_MASK GENMASK(15, 12) #define TRIM_EN_CH BIT(7) #define TER_ADC_PD BIT(30) #define TER_EN BIT(31) #define TRITSR_TEMP0_VAL_MASK GENMASK(7, 0) #define TRITSR_TEMP1_VAL_MASK GENMASK(23, 16) #define PROBE_SEL_ALL GENMASK(31, 30) #define probe_status_offset(x) (30 + x) #define SIGN_BIT BIT(7) #define TEMP_VAL_MASK GENMASK(6, 0) /* TMU OCOTP calibration data bitfields */ #define ANA0_EN BIT(25) #define ANA0_BUF_VREF_MASK GENMASK(24, 20) #define ANA0_BUF_SLOPE_MASK GENMASK(19, 16) #define ANA0_HR_MASK GENMASK(15, 8) #define ANA0_RT_MASK GENMASK(7, 0) #define TRIM2_VLSB_MASK GENMASK(23, 20) #define TRIM2_BGR_MASK GENMASK(19, 16) #define TRIM2_BJT_CUR_MASK GENMASK(15, 12) #define TRIM2_BUF_SLOP_SEL_MASK GENMASK(11, 8) #define TRIM2_BUF_VERF_SEL_MASK GENMASK(7, 6) #define TRIM3_TCA25_0_LSB_MASK GENMASK(31, 28) #define TRIM3_TCA40_0_MASK GENMASK(27, 16) #define TRIM4_TCA40_1_MASK GENMASK(31, 20) #define TRIM4_TCA105_0_MASK GENMASK(19, 8) #define TRIM4_TCA25_0_MSB_MASK GENMASK(7, 0) #define TRIM5_TCA105_1_MASK GENMASK(23, 12) #define TRIM5_TCA25_1_MASK GENMASK(11, 0) #define VER1_TEMP_LOW_LIMIT 10000 #define VER2_TEMP_LOW_LIMIT -40000 #define VER2_TEMP_HIGH_LIMIT 125000 #define TMU_VER1 0x1 #define TMU_VER2 0x2 struct thermal_soc_data { u32 num_sensors; u32 version; int (*get_temp)(void *, int *); }; struct tmu_sensor { struct imx8mm_tmu *priv; u32 hw_id; struct thermal_zone_device *tzd; }; struct imx8mm_tmu { void __iomem *base; struct clk *clk; const struct thermal_soc_data *socdata; struct tmu_sensor sensors[]; }; static int imx8mm_tmu_get_temp(void *data, int *temp) { struct tmu_sensor *sensor = data; struct imx8mm_tmu *tmu = sensor->priv; u32 val; val = readl_relaxed(tmu->base + TRITSR) & TRITSR_TEMP0_VAL_MASK; /* * Do not validate against the V bit (bit 31) due to errata * ERR051272: TMU: Bit 31 of registers TMU_TSCR/TMU_TRITSR/TMU_TRATSR invalid */ *temp = val * 1000; if (*temp < VER1_TEMP_LOW_LIMIT || *temp > VER2_TEMP_HIGH_LIMIT) return -EAGAIN; return 0; } static int imx8mp_tmu_get_temp(void *data, int *temp) { struct tmu_sensor *sensor = data; struct imx8mm_tmu *tmu = sensor->priv; unsigned long val; bool ready; val = readl_relaxed(tmu->base + TRITSR); ready = test_bit(probe_status_offset(sensor->hw_id), &val); if (!ready) return -EAGAIN; val = sensor->hw_id ? FIELD_GET(TRITSR_TEMP1_VAL_MASK, val) : FIELD_GET(TRITSR_TEMP0_VAL_MASK, val); if (val & SIGN_BIT) /* negative */ val = (~(val & TEMP_VAL_MASK) + 1); *temp = val * 1000; if (*temp < VER2_TEMP_LOW_LIMIT || *temp > VER2_TEMP_HIGH_LIMIT) return -EAGAIN; return 0; } static int tmu_get_temp(struct thermal_zone_device *tz, int *temp) { struct tmu_sensor *sensor = tz->devdata; struct imx8mm_tmu *tmu = sensor->priv; return tmu->socdata->get_temp(sensor, temp); } static const struct thermal_zone_device_ops tmu_tz_ops = { .get_temp = tmu_get_temp, }; static void imx8mm_tmu_enable(struct imx8mm_tmu *tmu, bool enable) { u32 val; val = readl_relaxed(tmu->base + TER); val = enable ? (val | TER_EN) : (val & ~TER_EN); if (tmu->socdata->version == TMU_VER2) val = enable ? (val & ~TER_ADC_PD) : (val | TER_ADC_PD); writel_relaxed(val, tmu->base + TER); } static void imx8mm_tmu_probe_sel_all(struct imx8mm_tmu *tmu) { u32 val; val = readl_relaxed(tmu->base + TPS); val |= PROBE_SEL_ALL; writel_relaxed(val, tmu->base + TPS); } static int imx8mm_tmu_probe_set_calib_v1(struct platform_device *pdev, struct imx8mm_tmu *tmu) { struct device *dev = &pdev->dev; u32 ana0; int ret; ret = nvmem_cell_read_u32(&pdev->dev, "calib", &ana0); if (ret) { dev_warn(dev, "Failed to read OCOTP nvmem cell (%d).\n", ret); return ret; } writel(FIELD_PREP(TASR_BUF_VREF_MASK, FIELD_GET(ANA0_BUF_VREF_MASK, ana0)) | FIELD_PREP(TASR_BUF_SLOPE_MASK, FIELD_GET(ANA0_BUF_SLOPE_MASK, ana0)), tmu->base + TASR); writel(FIELD_PREP(TCALIV_RT_MASK, FIELD_GET(ANA0_RT_MASK, ana0)) | FIELD_PREP(TCALIV_HR_MASK, FIELD_GET(ANA0_HR_MASK, ana0)) | ((ana0 & ANA0_EN) ? TCALIV_EN : 0), tmu->base + TCALIV(0)); return 0; } static int imx8mm_tmu_probe_set_calib_v2(struct platform_device *pdev, struct imx8mm_tmu *tmu) { struct device *dev = &pdev->dev; struct nvmem_cell *cell; u32 trim[4] = { 0 }; size_t len; void *buf; cell = nvmem_cell_get(dev, "calib"); if (IS_ERR(cell)) return PTR_ERR(cell); buf = nvmem_cell_read(cell, &len); nvmem_cell_put(cell); if (IS_ERR(buf)) return PTR_ERR(buf); memcpy(trim, buf, min(len, sizeof(trim))); kfree(buf); if (len != 16) { dev_err(dev, "OCOTP nvmem cell length is %zu, must be 16.\n", len); return -EINVAL; } /* Blank sample hardware */ if (!trim[0] && !trim[1] && !trim[2] && !trim[3]) { /* Use a default 25C binary codes */ writel(FIELD_PREP(TCALIV_SNSR25C_MASK, 0x63c), tmu->base + TCALIV(0)); writel(FIELD_PREP(TCALIV_SNSR25C_MASK, 0x63c), tmu->base + TCALIV(1)); return 0; } writel(FIELD_PREP(TASR_BUF_VERF_SEL_MASK, FIELD_GET(TRIM2_BUF_VERF_SEL_MASK, trim[0])) | FIELD_PREP(TASR_BUF_SLOPE_MASK, FIELD_GET(TRIM2_BUF_SLOP_SEL_MASK, trim[0])), tmu->base + TASR); writel(FIELD_PREP(TRIM_BJT_CUR_MASK, FIELD_GET(TRIM2_BJT_CUR_MASK, trim[0])) | FIELD_PREP(TRIM_BGR_MASK, FIELD_GET(TRIM2_BGR_MASK, trim[0])) | FIELD_PREP(TRIM_VLSB_MASK, FIELD_GET(TRIM2_VLSB_MASK, trim[0])) | TRIM_EN_CH, tmu->base + TRIM); writel(FIELD_PREP(TCALIV_SNSR25C_MASK, FIELD_GET(TRIM3_TCA25_0_LSB_MASK, trim[1]) | (FIELD_GET(TRIM4_TCA25_0_MSB_MASK, trim[2]) << 4)) | FIELD_PREP(TCALIV_SNSR105C_MASK, FIELD_GET(TRIM4_TCA105_0_MASK, trim[2])), tmu->base + TCALIV(0)); writel(FIELD_PREP(TCALIV_SNSR25C_MASK, FIELD_GET(TRIM5_TCA25_1_MASK, trim[3])) | FIELD_PREP(TCALIV_SNSR105C_MASK, FIELD_GET(TRIM5_TCA105_1_MASK, trim[3])), tmu->base + TCALIV(1)); writel(FIELD_PREP(TCALIV_SNSR25C_MASK, FIELD_GET(TRIM3_TCA40_0_MASK, trim[1])) | FIELD_PREP(TCALIV_SNSR105C_MASK, FIELD_GET(TRIM4_TCA40_1_MASK, trim[2])), tmu->base + TCALIV(2)); return 0; } static int imx8mm_tmu_probe_set_calib(struct platform_device *pdev, struct imx8mm_tmu *tmu) { struct device *dev = &pdev->dev; /* * Lack of calibration data OCOTP reference is not considered * fatal to retain compatibility with old DTs. It is however * strongly recommended to update such old DTs to get correct * temperature compensation values for each SoC. */ if (!of_find_property(pdev->dev.of_node, "nvmem-cells", NULL)) { dev_warn(dev, "No OCOTP nvmem reference found, SoC-specific calibration not loaded. Please update your DT.\n"); return 0; } if (tmu->socdata->version == TMU_VER1) return imx8mm_tmu_probe_set_calib_v1(pdev, tmu); return imx8mm_tmu_probe_set_calib_v2(pdev, tmu); } static int imx8mm_tmu_probe(struct platform_device *pdev) { const struct thermal_soc_data *data; struct imx8mm_tmu *tmu; int ret; int i; data = of_device_get_match_data(&pdev->dev); tmu = devm_kzalloc(&pdev->dev, struct_size(tmu, sensors, data->num_sensors), GFP_KERNEL); if (!tmu) return -ENOMEM; tmu->socdata = data; tmu->base = devm_platform_ioremap_resource(pdev, 0); if (IS_ERR(tmu->base)) return PTR_ERR(tmu->base); tmu->clk = devm_clk_get(&pdev->dev, NULL); if (IS_ERR(tmu->clk)) return dev_err_probe(&pdev->dev, PTR_ERR(tmu->clk), "failed to get tmu clock\n"); ret = clk_prepare_enable(tmu->clk); if (ret) { dev_err(&pdev->dev, "failed to enable tmu clock: %d\n", ret); return ret; } /* disable the monitor during initialization */ imx8mm_tmu_enable(tmu, false); for (i = 0; i < data->num_sensors; i++) { tmu->sensors[i].priv = tmu; tmu->sensors[i].tzd = devm_thermal_of_zone_register(&pdev->dev, i, &tmu->sensors[i], &tmu_tz_ops); if (IS_ERR(tmu->sensors[i].tzd)) { ret = PTR_ERR(tmu->sensors[i].tzd); dev_err(&pdev->dev, "failed to register thermal zone sensor[%d]: %d\n", i, ret); goto disable_clk; } tmu->sensors[i].hw_id = i; if (devm_thermal_add_hwmon_sysfs(tmu->sensors[i].tzd)) dev_warn(&pdev->dev, "failed to add hwmon sysfs attributes\n"); } platform_set_drvdata(pdev, tmu); ret = imx8mm_tmu_probe_set_calib(pdev, tmu); if (ret) goto disable_clk; /* enable all the probes for V2 TMU */ if (tmu->socdata->version == TMU_VER2) imx8mm_tmu_probe_sel_all(tmu); /* enable the monitor */ imx8mm_tmu_enable(tmu, true); return 0; disable_clk: clk_disable_unprepare(tmu->clk); return ret; } static int imx8mm_tmu_remove(struct platform_device *pdev) { struct imx8mm_tmu *tmu = platform_get_drvdata(pdev); /* disable TMU */ imx8mm_tmu_enable(tmu, false); clk_disable_unprepare(tmu->clk); platform_set_drvdata(pdev, NULL); return 0; } static struct thermal_soc_data imx8mm_tmu_data = { .num_sensors = 1, .version = TMU_VER1, .get_temp = imx8mm_tmu_get_temp, }; static struct thermal_soc_data imx8mp_tmu_data = { .num_sensors = 2, .version = TMU_VER2, .get_temp = imx8mp_tmu_get_temp, }; static const struct of_device_id imx8mm_tmu_table[] = { { .compatible = "fsl,imx8mm-tmu", .data = &imx8mm_tmu_data, }, { .compatible = "fsl,imx8mp-tmu", .data = &imx8mp_tmu_data, }, { }, }; MODULE_DEVICE_TABLE(of, imx8mm_tmu_table); static struct platform_driver imx8mm_tmu = { .driver = { .name = "i.mx8mm_thermal", .of_match_table = imx8mm_tmu_table, }, .probe = imx8mm_tmu_probe, .remove = imx8mm_tmu_remove, }; module_platform_driver(imx8mm_tmu); MODULE_AUTHOR("Anson Huang "); MODULE_DESCRIPTION("i.MX8MM Thermal Monitor Unit driver"); MODULE_LICENSE("GPL v2");