/* * PWM device driver for ST SoCs. * Author: Ajit Pal Singh * * Copyright (C) 2013-2014 STMicroelectronics (R&D) Limited * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. */ #include #include #include #include #include #include #include #include #include #include #define PWM_OUT_VAL(x) (0x00 + (4 * (x))) /* Device's Duty Cycle register */ #define STI_PWM_CTRL 0x50 /* Control/Config register */ #define STI_INT_EN 0x54 /* Interrupt Enable/Disable register */ #define PWM_PRESCALE_LOW_MASK 0x0f #define PWM_PRESCALE_HIGH_MASK 0xf0 /* Regfield IDs */ enum { /* Bits in PWM_CTRL*/ PWMCLK_PRESCALE_LOW, PWMCLK_PRESCALE_HIGH, PWM_OUT_EN, PWM_CPT_INT_EN, /* Keep last */ MAX_REGFIELDS }; struct sti_pwm_compat_data { const struct reg_field *reg_fields; unsigned int num_devs; unsigned int max_pwm_cnt; unsigned int max_prescale; }; struct sti_pwm_chip { struct device *dev; struct clk *pwm_clk; struct regmap *regmap; struct sti_pwm_compat_data *cdata; struct regmap_field *prescale_low; struct regmap_field *prescale_high; struct regmap_field *pwm_out_en; struct regmap_field *pwm_cpt_int_en; struct pwm_chip chip; struct pwm_device *cur; unsigned long configured; unsigned int en_count; struct mutex sti_pwm_lock; /* To sync between enable/disable calls */ void __iomem *mmio; }; static const struct reg_field sti_pwm_regfields[MAX_REGFIELDS] = { [PWMCLK_PRESCALE_LOW] = REG_FIELD(STI_PWM_CTRL, 0, 3), [PWMCLK_PRESCALE_HIGH] = REG_FIELD(STI_PWM_CTRL, 11, 14), [PWM_OUT_EN] = REG_FIELD(STI_PWM_CTRL, 9, 9), [PWM_CPT_INT_EN] = REG_FIELD(STI_INT_EN, 1, 4), }; static inline struct sti_pwm_chip *to_sti_pwmchip(struct pwm_chip *chip) { return container_of(chip, struct sti_pwm_chip, chip); } /* * Calculate the prescaler value corresponding to the period. */ static int sti_pwm_get_prescale(struct sti_pwm_chip *pc, unsigned long period, unsigned int *prescale) { struct sti_pwm_compat_data *cdata = pc->cdata; unsigned long clk_rate; unsigned long val; unsigned int ps; clk_rate = clk_get_rate(pc->pwm_clk); if (!clk_rate) { dev_err(pc->dev, "failed to get clock rate\n"); return -EINVAL; } /* * prescale = ((period_ns * clk_rate) / (10^9 * (max_pwm_count + 1)) - 1 */ val = NSEC_PER_SEC / clk_rate; val *= cdata->max_pwm_cnt + 1; if (period % val) { return -EINVAL; } else { ps = period / val - 1; if (ps > cdata->max_prescale) return -EINVAL; } *prescale = ps; return 0; } /* * For STiH4xx PWM IP, the PWM period is fixed to 256 local clock cycles. * The only way to change the period (apart from changing the PWM input clock) * is to change the PWM clock prescaler. * The prescaler is of 8 bits, so 256 prescaler values and hence * 256 possible period values are supported (for a particular clock rate). * The requested period will be applied only if it matches one of these * 256 values. */ static int sti_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm, int duty_ns, int period_ns) { struct sti_pwm_chip *pc = to_sti_pwmchip(chip); struct sti_pwm_compat_data *cdata = pc->cdata; struct pwm_device *cur = pc->cur; struct device *dev = pc->dev; unsigned int prescale = 0, pwmvalx; int ret; unsigned int ncfg; bool period_same = false; ncfg = hweight_long(pc->configured); if (ncfg) period_same = (period_ns == pwm_get_period(cur)); /* Allow configuration changes if one of the * following conditions satisfy. * 1. No devices have been configured. * 2. Only one device has been configured and the new request * is for the same device. * 3. Only one device has been configured and the new request is * for a new device and period of the new device is same as * the current configured period. * 4. More than one devices are configured and period of the new * requestis the same as the current period. */ if (!ncfg || ((ncfg == 1) && (pwm->hwpwm == cur->hwpwm)) || ((ncfg == 1) && (pwm->hwpwm != cur->hwpwm) && period_same) || ((ncfg > 1) && period_same)) { /* Enable clock before writing to PWM registers. */ ret = clk_enable(pc->pwm_clk); if (ret) return ret; if (!period_same) { ret = sti_pwm_get_prescale(pc, period_ns, &prescale); if (ret) goto clk_dis; ret = regmap_field_write(pc->prescale_low, prescale & PWM_PRESCALE_LOW_MASK); if (ret) goto clk_dis; ret = regmap_field_write(pc->prescale_high, (prescale & PWM_PRESCALE_HIGH_MASK) >> 4); if (ret) goto clk_dis; } /* * When PWMVal == 0, PWM pulse = 1 local clock cycle. * When PWMVal == max_pwm_count, * PWM pulse = (max_pwm_count + 1) local cycles, * that is continuous pulse: signal never goes low. */ pwmvalx = cdata->max_pwm_cnt * duty_ns / period_ns; ret = regmap_write(pc->regmap, PWM_OUT_VAL(pwm->hwpwm), pwmvalx); if (ret) goto clk_dis; ret = regmap_field_write(pc->pwm_cpt_int_en, 0); set_bit(pwm->hwpwm, &pc->configured); pc->cur = pwm; dev_dbg(dev, "prescale:%u, period:%i, duty:%i, pwmvalx:%u\n", prescale, period_ns, duty_ns, pwmvalx); } else { return -EINVAL; } clk_dis: clk_disable(pc->pwm_clk); return ret; } static int sti_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm) { struct sti_pwm_chip *pc = to_sti_pwmchip(chip); struct device *dev = pc->dev; int ret = 0; /* * Since we have a common enable for all PWM devices, * do not enable if already enabled. */ mutex_lock(&pc->sti_pwm_lock); if (!pc->en_count) { ret = clk_enable(pc->pwm_clk); if (ret) goto out; ret = regmap_field_write(pc->pwm_out_en, 1); if (ret) { dev_err(dev, "failed to enable PWM device:%d\n", pwm->hwpwm); goto out; } } pc->en_count++; out: mutex_unlock(&pc->sti_pwm_lock); return ret; } static void sti_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm) { struct sti_pwm_chip *pc = to_sti_pwmchip(chip); mutex_lock(&pc->sti_pwm_lock); if (--pc->en_count) { mutex_unlock(&pc->sti_pwm_lock); return; } regmap_field_write(pc->pwm_out_en, 0); clk_disable(pc->pwm_clk); mutex_unlock(&pc->sti_pwm_lock); } static void sti_pwm_free(struct pwm_chip *chip, struct pwm_device *pwm) { struct sti_pwm_chip *pc = to_sti_pwmchip(chip); clear_bit(pwm->hwpwm, &pc->configured); } static const struct pwm_ops sti_pwm_ops = { .config = sti_pwm_config, .enable = sti_pwm_enable, .disable = sti_pwm_disable, .free = sti_pwm_free, .owner = THIS_MODULE, }; static int sti_pwm_probe_dt(struct sti_pwm_chip *pc) { struct device *dev = pc->dev; const struct reg_field *reg_fields; struct device_node *np = dev->of_node; struct sti_pwm_compat_data *cdata = pc->cdata; u32 num_devs; of_property_read_u32(np, "st,pwm-num-chan", &num_devs); if (num_devs) cdata->num_devs = num_devs; reg_fields = cdata->reg_fields; pc->prescale_low = devm_regmap_field_alloc(dev, pc->regmap, reg_fields[PWMCLK_PRESCALE_LOW]); if (IS_ERR(pc->prescale_low)) return PTR_ERR(pc->prescale_low); pc->prescale_high = devm_regmap_field_alloc(dev, pc->regmap, reg_fields[PWMCLK_PRESCALE_HIGH]); if (IS_ERR(pc->prescale_high)) return PTR_ERR(pc->prescale_high); pc->pwm_out_en = devm_regmap_field_alloc(dev, pc->regmap, reg_fields[PWM_OUT_EN]); if (IS_ERR(pc->pwm_out_en)) return PTR_ERR(pc->pwm_out_en); pc->pwm_cpt_int_en = devm_regmap_field_alloc(dev, pc->regmap, reg_fields[PWM_CPT_INT_EN]); if (IS_ERR(pc->pwm_cpt_int_en)) return PTR_ERR(pc->pwm_cpt_int_en); return 0; } static const struct regmap_config sti_pwm_regmap_config = { .reg_bits = 32, .val_bits = 32, .reg_stride = 4, }; static int sti_pwm_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; struct sti_pwm_compat_data *cdata; struct sti_pwm_chip *pc; struct resource *res; int ret; pc = devm_kzalloc(dev, sizeof(*pc), GFP_KERNEL); if (!pc) return -ENOMEM; cdata = devm_kzalloc(dev, sizeof(*cdata), GFP_KERNEL); if (!cdata) return -ENOMEM; res = platform_get_resource(pdev, IORESOURCE_MEM, 0); pc->mmio = devm_ioremap_resource(dev, res); if (IS_ERR(pc->mmio)) return PTR_ERR(pc->mmio); pc->regmap = devm_regmap_init_mmio(dev, pc->mmio, &sti_pwm_regmap_config); if (IS_ERR(pc->regmap)) return PTR_ERR(pc->regmap); /* * Setup PWM data with default values: some values could be replaced * with specific ones provided from Device Tree. */ cdata->reg_fields = &sti_pwm_regfields[0]; cdata->max_prescale = 0xff; cdata->max_pwm_cnt = 255; cdata->num_devs = 1; pc->cdata = cdata; pc->dev = dev; pc->en_count = 0; mutex_init(&pc->sti_pwm_lock); ret = sti_pwm_probe_dt(pc); if (ret) return ret; pc->pwm_clk = of_clk_get_by_name(dev->of_node, "pwm"); if (IS_ERR(pc->pwm_clk)) { dev_err(dev, "failed to get PWM clock\n"); return PTR_ERR(pc->pwm_clk); } ret = clk_prepare(pc->pwm_clk); if (ret) { dev_err(dev, "failed to prepare clock\n"); return ret; } pc->chip.dev = dev; pc->chip.ops = &sti_pwm_ops; pc->chip.base = -1; pc->chip.npwm = pc->cdata->num_devs; pc->chip.can_sleep = true; ret = pwmchip_add(&pc->chip); if (ret < 0) { clk_unprepare(pc->pwm_clk); return ret; } platform_set_drvdata(pdev, pc); return 0; } static int sti_pwm_remove(struct platform_device *pdev) { struct sti_pwm_chip *pc = platform_get_drvdata(pdev); unsigned int i; for (i = 0; i < pc->cdata->num_devs; i++) pwm_disable(&pc->chip.pwms[i]); clk_unprepare(pc->pwm_clk); return pwmchip_remove(&pc->chip); } static const struct of_device_id sti_pwm_of_match[] = { { .compatible = "st,sti-pwm", }, { /* sentinel */ } }; MODULE_DEVICE_TABLE(of, sti_pwm_of_match); static struct platform_driver sti_pwm_driver = { .driver = { .name = "sti-pwm", .of_match_table = sti_pwm_of_match, }, .probe = sti_pwm_probe, .remove = sti_pwm_remove, }; module_platform_driver(sti_pwm_driver); MODULE_AUTHOR("Ajit Pal Singh "); MODULE_DESCRIPTION("STMicroelectronics ST PWM driver"); MODULE_LICENSE("GPL");