// SPDX-License-Identifier: GPL-2.0-only /* * Toggles a GPIO pin to power down a device * * Jamie Lentin * Andrew Lunn * * Copyright (C) 2012 Jamie Lentin */ #include #include #include #include #include #include #include #define DEFAULT_TIMEOUT_MS 3000 /* * Hold configuration here, cannot be more than one instance of the driver * since pm_power_off itself is global. */ static struct gpio_desc *reset_gpio; static u32 timeout = DEFAULT_TIMEOUT_MS; static u32 active_delay = 100; static u32 inactive_delay = 100; static void gpio_poweroff_do_poweroff(void) { BUG_ON(!reset_gpio); /* drive it active, also inactive->active edge */ gpiod_direction_output(reset_gpio, 1); mdelay(active_delay); /* drive inactive, also active->inactive edge */ gpiod_set_value_cansleep(reset_gpio, 0); mdelay(inactive_delay); /* drive it active, also inactive->active edge */ gpiod_set_value_cansleep(reset_gpio, 1); /* give it some time */ mdelay(timeout); WARN_ON(1); } static int gpio_poweroff_probe(struct platform_device *pdev) { bool input = false; enum gpiod_flags flags; /* If a pm_power_off function has already been added, leave it alone */ if (pm_power_off != NULL) { dev_err(&pdev->dev, "%s: pm_power_off function already registered", __func__); return -EBUSY; } input = device_property_read_bool(&pdev->dev, "input"); if (input) flags = GPIOD_IN; else flags = GPIOD_OUT_LOW; device_property_read_u32(&pdev->dev, "active-delay-ms", &active_delay); device_property_read_u32(&pdev->dev, "inactive-delay-ms", &inactive_delay); device_property_read_u32(&pdev->dev, "timeout-ms", &timeout); reset_gpio = devm_gpiod_get(&pdev->dev, NULL, flags); if (IS_ERR(reset_gpio)) return PTR_ERR(reset_gpio); pm_power_off = &gpio_poweroff_do_poweroff; return 0; } static int gpio_poweroff_remove(struct platform_device *pdev) { if (pm_power_off == &gpio_poweroff_do_poweroff) pm_power_off = NULL; return 0; } static const struct of_device_id of_gpio_poweroff_match[] = { { .compatible = "gpio-poweroff", }, {}, }; static struct platform_driver gpio_poweroff_driver = { .probe = gpio_poweroff_probe, .remove = gpio_poweroff_remove, .driver = { .name = "poweroff-gpio", .of_match_table = of_gpio_poweroff_match, }, }; module_platform_driver(gpio_poweroff_driver); MODULE_AUTHOR("Jamie Lentin "); MODULE_DESCRIPTION("GPIO poweroff driver"); MODULE_LICENSE("GPL v2"); MODULE_ALIAS("platform:poweroff-gpio");