/* SPDX-License-Identifier: GPL-2.0 */ /* * Core pinctrl/GPIO driver for Intel GPIO controllers * * Copyright (C) 2015, Intel Corporation * Authors: Mathias Nyman * Mika Westerberg */ #ifndef PINCTRL_INTEL_H #define PINCTRL_INTEL_H #include #include #include #include struct pinctrl_pin_desc; struct platform_device; struct device; /** * struct intel_pingroup - Description about group of pins * @name: Name of the groups * @pins: All pins in this group * @npins: Number of pins in this groups * @mode: Native mode in which the group is muxed out @pins. Used if @modes * is %NULL. * @modes: If not %NULL this will hold mode for each pin in @pins */ struct intel_pingroup { const char *name; const unsigned int *pins; size_t npins; unsigned short mode; const unsigned int *modes; }; /** * struct intel_function - Description about a function * @name: Name of the function * @groups: An array of groups for this function * @ngroups: Number of groups in @groups */ struct intel_function { const char *name; const char * const *groups; size_t ngroups; }; /** * struct intel_padgroup - Hardware pad group information * @reg_num: GPI_IS register number * @base: Starting pin of this group * @size: Size of this group (maximum is 32). * @gpio_base: Starting GPIO base of this group * @padown_num: PAD_OWN register number (assigned by the core driver) * * If pad groups of a community are not the same size, use this structure * to specify them. */ struct intel_padgroup { unsigned int reg_num; unsigned int base; unsigned int size; int gpio_base; unsigned int padown_num; }; /** * enum - Special treatment for GPIO base in pad group * * @INTEL_GPIO_BASE_ZERO: force GPIO base to be 0 * @INTEL_GPIO_BASE_NOMAP: no GPIO mapping should be created * @INTEL_GPIO_BASE_MATCH: matches with starting pin number */ enum { INTEL_GPIO_BASE_ZERO = -2, INTEL_GPIO_BASE_NOMAP = -1, INTEL_GPIO_BASE_MATCH = 0, }; /** * struct intel_community - Intel pin community description * @barno: MMIO BAR number where registers for this community reside * @padown_offset: Register offset of PAD_OWN register from @regs. If %0 * then there is no support for owner. * @padcfglock_offset: Register offset of PADCFGLOCK from @regs. If %0 then * locking is not supported. * @hostown_offset: Register offset of HOSTSW_OWN from @regs. If %0 then it * is assumed that the host owns the pin (rather than * ACPI). * @is_offset: Register offset of GPI_IS from @regs. * @ie_offset: Register offset of GPI_IE from @regs. * @features: Additional features supported by the hardware * @pin_base: Starting pin of pins in this community * @npins: Number of pins in this community * @gpp_size: Maximum number of pads in each group, such as PADCFGLOCK, * HOSTSW_OWN, GPI_IS, GPI_IE. Used when @gpps is %NULL. * @gpp_num_padown_regs: Number of pad registers each pad group consumes at * minimum. Use %0 if the number of registers can be * determined by the size of the group. * @gpps: Pad groups if the controller has variable size pad groups * @ngpps: Number of pad groups in this community * @pad_map: Optional non-linear mapping of the pads * @nirqs: Optional total number of IRQs this community can generate * @acpi_space_id: Optional address space ID for ACPI OpRegion handler * @regs: Community specific common registers (reserved for core driver) * @pad_regs: Community specific pad registers (reserved for core driver) * * In some of Intel GPIO host controllers this driver supports each pad group * is of equal size (except the last one). In that case the driver can just * fill in @gpp_size field and let the core driver to handle the rest. If * the controller has pad groups of variable size the client driver can * pass custom @gpps and @ngpps instead. */ struct intel_community { unsigned int barno; unsigned int padown_offset; unsigned int padcfglock_offset; unsigned int hostown_offset; unsigned int is_offset; unsigned int ie_offset; unsigned int features; unsigned int pin_base; size_t npins; unsigned int gpp_size; unsigned int gpp_num_padown_regs; const struct intel_padgroup *gpps; size_t ngpps; const unsigned int *pad_map; unsigned short nirqs; unsigned short acpi_space_id; /* Reserved for the core driver */ void __iomem *regs; void __iomem *pad_regs; }; /* Additional features supported by the hardware */ #define PINCTRL_FEATURE_DEBOUNCE BIT(0) #define PINCTRL_FEATURE_1K_PD BIT(1) /** * PIN_GROUP - Declare a pin group * @n: Name of the group * @p: An array of pins this group consists * @m: Mode which the pins are put when this group is active. Can be either * a single integer or an array of integers in which case mode is per * pin. */ #define PIN_GROUP(n, p, m) \ { \ .name = (n), \ .pins = (p), \ .npins = ARRAY_SIZE((p)), \ .mode = __builtin_choose_expr( \ __builtin_constant_p((m)), (m), 0), \ .modes = __builtin_choose_expr( \ __builtin_constant_p((m)), NULL, (m)), \ } #define FUNCTION(n, g) \ { \ .name = (n), \ .groups = (g), \ .ngroups = ARRAY_SIZE((g)), \ } /** * struct intel_pinctrl_soc_data - Intel pin controller per-SoC configuration * @uid: ACPI _UID for the probe driver use if needed * @pins: Array if pins this pinctrl controls * @npins: Number of pins in the array * @groups: Array of pin groups * @ngroups: Number of groups in the array * @functions: Array of functions * @nfunctions: Number of functions in the array * @communities: Array of communities this pinctrl handles * @ncommunities: Number of communities in the array * * The @communities is used as a template by the core driver. It will make * copy of all communities and fill in rest of the information. */ struct intel_pinctrl_soc_data { const char *uid; const struct pinctrl_pin_desc *pins; size_t npins; const struct intel_pingroup *groups; size_t ngroups; const struct intel_function *functions; size_t nfunctions; const struct intel_community *communities; size_t ncommunities; }; struct intel_pad_context; struct intel_community_context; /** * struct intel_pinctrl_context - context to be saved during suspend-resume * @pads: Opaque context per pad (driver dependent) * @communities: Opaque context per community (driver dependent) */ struct intel_pinctrl_context { struct intel_pad_context *pads; struct intel_community_context *communities; }; /** * struct intel_pinctrl - Intel pinctrl private structure * @dev: Pointer to the device structure * @lock: Lock to serialize register access * @pctldesc: Pin controller description * @pctldev: Pointer to the pin controller device * @chip: GPIO chip in this pin controller * @irqchip: IRQ chip in this pin controller * @soc: SoC/PCH specific pin configuration data * @communities: All communities in this pin controller * @ncommunities: Number of communities in this pin controller * @context: Configuration saved over system sleep * @irq: pinctrl/GPIO chip irq number */ struct intel_pinctrl { struct device *dev; raw_spinlock_t lock; struct pinctrl_desc pctldesc; struct pinctrl_dev *pctldev; struct gpio_chip chip; struct irq_chip irqchip; const struct intel_pinctrl_soc_data *soc; struct intel_community *communities; size_t ncommunities; struct intel_pinctrl_context context; int irq; }; int intel_pinctrl_probe_by_hid(struct platform_device *pdev); int intel_pinctrl_probe_by_uid(struct platform_device *pdev); #ifdef CONFIG_PM_SLEEP int intel_pinctrl_suspend_noirq(struct device *dev); int intel_pinctrl_resume_noirq(struct device *dev); #endif #define INTEL_PINCTRL_PM_OPS(_name) \ const struct dev_pm_ops _name = { \ SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(intel_pinctrl_suspend_noirq, \ intel_pinctrl_resume_noirq) \ } #endif /* PINCTRL_INTEL_H */