// SPDX-License-Identifier: GPL-2.0 /* * PCI Express I/O Virtualization (IOV) support * Address Translation Service 1.0 * Page Request Interface added by Joerg Roedel * PASID support added by Joerg Roedel * * Copyright (C) 2009 Intel Corporation, Yu Zhao * Copyright (C) 2011 Advanced Micro Devices, */ #include #include #include #include #include "pci.h" void pci_ats_init(struct pci_dev *dev) { int pos; if (pci_ats_disabled()) return; pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ATS); if (!pos) return; dev->ats_cap = pos; } /** * pci_ats_supported - check if the device can use ATS * @dev: the PCI device * * Returns true if the device supports ATS and is allowed to use it, false * otherwise. */ bool pci_ats_supported(struct pci_dev *dev) { if (!dev->ats_cap) return false; return (dev->untrusted == 0); } EXPORT_SYMBOL_GPL(pci_ats_supported); /** * pci_enable_ats - enable the ATS capability * @dev: the PCI device * @ps: the IOMMU page shift * * Returns 0 on success, or negative on failure. */ int pci_enable_ats(struct pci_dev *dev, int ps) { u16 ctrl; struct pci_dev *pdev; if (!pci_ats_supported(dev)) return -EINVAL; if (WARN_ON(dev->ats_enabled)) return -EBUSY; if (ps < PCI_ATS_MIN_STU) return -EINVAL; /* * Note that enabling ATS on a VF fails unless it's already enabled * with the same STU on the PF. */ ctrl = PCI_ATS_CTRL_ENABLE; if (dev->is_virtfn) { pdev = pci_physfn(dev); if (pdev->ats_stu != ps) return -EINVAL; } else { dev->ats_stu = ps; ctrl |= PCI_ATS_CTRL_STU(dev->ats_stu - PCI_ATS_MIN_STU); } pci_write_config_word(dev, dev->ats_cap + PCI_ATS_CTRL, ctrl); dev->ats_enabled = 1; return 0; } EXPORT_SYMBOL_GPL(pci_enable_ats); /** * pci_disable_ats - disable the ATS capability * @dev: the PCI device */ void pci_disable_ats(struct pci_dev *dev) { u16 ctrl; if (WARN_ON(!dev->ats_enabled)) return; pci_read_config_word(dev, dev->ats_cap + PCI_ATS_CTRL, &ctrl); ctrl &= ~PCI_ATS_CTRL_ENABLE; pci_write_config_word(dev, dev->ats_cap + PCI_ATS_CTRL, ctrl); dev->ats_enabled = 0; } EXPORT_SYMBOL_GPL(pci_disable_ats); void pci_restore_ats_state(struct pci_dev *dev) { u16 ctrl; if (!dev->ats_enabled) return; ctrl = PCI_ATS_CTRL_ENABLE; if (!dev->is_virtfn) ctrl |= PCI_ATS_CTRL_STU(dev->ats_stu - PCI_ATS_MIN_STU); pci_write_config_word(dev, dev->ats_cap + PCI_ATS_CTRL, ctrl); } /** * pci_ats_queue_depth - query the ATS Invalidate Queue Depth * @dev: the PCI device * * Returns the queue depth on success, or negative on failure. * * The ATS spec uses 0 in the Invalidate Queue Depth field to * indicate that the function can accept 32 Invalidate Request. * But here we use the `real' values (i.e. 1~32) for the Queue * Depth; and 0 indicates the function shares the Queue with * other functions (doesn't exclusively own a Queue). */ int pci_ats_queue_depth(struct pci_dev *dev) { u16 cap; if (!dev->ats_cap) return -EINVAL; if (dev->is_virtfn) return 0; pci_read_config_word(dev, dev->ats_cap + PCI_ATS_CAP, &cap); return PCI_ATS_CAP_QDEP(cap) ? PCI_ATS_CAP_QDEP(cap) : PCI_ATS_MAX_QDEP; } /** * pci_ats_page_aligned - Return Page Aligned Request bit status. * @pdev: the PCI device * * Returns 1, if the Untranslated Addresses generated by the device * are always aligned or 0 otherwise. * * Per PCIe spec r4.0, sec 10.5.1.2, if the Page Aligned Request bit * is set, it indicates the Untranslated Addresses generated by the * device are always aligned to a 4096 byte boundary. */ int pci_ats_page_aligned(struct pci_dev *pdev) { u16 cap; if (!pdev->ats_cap) return 0; pci_read_config_word(pdev, pdev->ats_cap + PCI_ATS_CAP, &cap); if (cap & PCI_ATS_CAP_PAGE_ALIGNED) return 1; return 0; } #ifdef CONFIG_PCI_PRI void pci_pri_init(struct pci_dev *pdev) { u16 status; pdev->pri_cap = pci_find_ext_capability(pdev, PCI_EXT_CAP_ID_PRI); if (!pdev->pri_cap) return; pci_read_config_word(pdev, pdev->pri_cap + PCI_PRI_STATUS, &status); if (status & PCI_PRI_STATUS_PASID) pdev->pasid_required = 1; } /** * pci_enable_pri - Enable PRI capability * @ pdev: PCI device structure * * Returns 0 on success, negative value on error */ int pci_enable_pri(struct pci_dev *pdev, u32 reqs) { u16 control, status; u32 max_requests; int pri = pdev->pri_cap; /* * VFs must not implement the PRI Capability. If their PF * implements PRI, it is shared by the VFs, so if the PF PRI is * enabled, it is also enabled for the VF. */ if (pdev->is_virtfn) { if (pci_physfn(pdev)->pri_enabled) return 0; return -EINVAL; } if (WARN_ON(pdev->pri_enabled)) return -EBUSY; if (!pri) return -EINVAL; pci_read_config_word(pdev, pri + PCI_PRI_STATUS, &status); if (!(status & PCI_PRI_STATUS_STOPPED)) return -EBUSY; pci_read_config_dword(pdev, pri + PCI_PRI_MAX_REQ, &max_requests); reqs = min(max_requests, reqs); pdev->pri_reqs_alloc = reqs; pci_write_config_dword(pdev, pri + PCI_PRI_ALLOC_REQ, reqs); control = PCI_PRI_CTRL_ENABLE; pci_write_config_word(pdev, pri + PCI_PRI_CTRL, control); pdev->pri_enabled = 1; return 0; } /** * pci_disable_pri - Disable PRI capability * @pdev: PCI device structure * * Only clears the enabled-bit, regardless of its former value */ void pci_disable_pri(struct pci_dev *pdev) { u16 control; int pri = pdev->pri_cap; /* VFs share the PF PRI */ if (pdev->is_virtfn) return; if (WARN_ON(!pdev->pri_enabled)) return; if (!pri) return; pci_read_config_word(pdev, pri + PCI_PRI_CTRL, &control); control &= ~PCI_PRI_CTRL_ENABLE; pci_write_config_word(pdev, pri + PCI_PRI_CTRL, control); pdev->pri_enabled = 0; } EXPORT_SYMBOL_GPL(pci_disable_pri); /** * pci_restore_pri_state - Restore PRI * @pdev: PCI device structure */ void pci_restore_pri_state(struct pci_dev *pdev) { u16 control = PCI_PRI_CTRL_ENABLE; u32 reqs = pdev->pri_reqs_alloc; int pri = pdev->pri_cap; if (pdev->is_virtfn) return; if (!pdev->pri_enabled) return; if (!pri) return; pci_write_config_dword(pdev, pri + PCI_PRI_ALLOC_REQ, reqs); pci_write_config_word(pdev, pri + PCI_PRI_CTRL, control); } /** * pci_reset_pri - Resets device's PRI state * @pdev: PCI device structure * * The PRI capability must be disabled before this function is called. * Returns 0 on success, negative value on error. */ int pci_reset_pri(struct pci_dev *pdev) { u16 control; int pri = pdev->pri_cap; if (pdev->is_virtfn) return 0; if (WARN_ON(pdev->pri_enabled)) return -EBUSY; if (!pri) return -EINVAL; control = PCI_PRI_CTRL_RESET; pci_write_config_word(pdev, pri + PCI_PRI_CTRL, control); return 0; } /** * pci_prg_resp_pasid_required - Return PRG Response PASID Required bit * status. * @pdev: PCI device structure * * Returns 1 if PASID is required in PRG Response Message, 0 otherwise. */ int pci_prg_resp_pasid_required(struct pci_dev *pdev) { if (pdev->is_virtfn) pdev = pci_physfn(pdev); return pdev->pasid_required; } #endif /* CONFIG_PCI_PRI */ #ifdef CONFIG_PCI_PASID void pci_pasid_init(struct pci_dev *pdev) { pdev->pasid_cap = pci_find_ext_capability(pdev, PCI_EXT_CAP_ID_PASID); } /** * pci_enable_pasid - Enable the PASID capability * @pdev: PCI device structure * @features: Features to enable * * Returns 0 on success, negative value on error. This function checks * whether the features are actually supported by the device and returns * an error if not. */ int pci_enable_pasid(struct pci_dev *pdev, int features) { u16 control, supported; int pasid = pdev->pasid_cap; /* * VFs must not implement the PASID Capability, but if a PF * supports PASID, its VFs share the PF PASID configuration. */ if (pdev->is_virtfn) { if (pci_physfn(pdev)->pasid_enabled) return 0; return -EINVAL; } if (WARN_ON(pdev->pasid_enabled)) return -EBUSY; if (!pdev->eetlp_prefix_path) return -EINVAL; if (!pasid) return -EINVAL; pci_read_config_word(pdev, pasid + PCI_PASID_CAP, &supported); supported &= PCI_PASID_CAP_EXEC | PCI_PASID_CAP_PRIV; /* User wants to enable anything unsupported? */ if ((supported & features) != features) return -EINVAL; control = PCI_PASID_CTRL_ENABLE | features; pdev->pasid_features = features; pci_write_config_word(pdev, pasid + PCI_PASID_CTRL, control); pdev->pasid_enabled = 1; return 0; } EXPORT_SYMBOL_GPL(pci_enable_pasid); /** * pci_disable_pasid - Disable the PASID capability * @pdev: PCI device structure */ void pci_disable_pasid(struct pci_dev *pdev) { u16 control = 0; int pasid = pdev->pasid_cap; /* VFs share the PF PASID configuration */ if (pdev->is_virtfn) return; if (WARN_ON(!pdev->pasid_enabled)) return; if (!pasid) return; pci_write_config_word(pdev, pasid + PCI_PASID_CTRL, control); pdev->pasid_enabled = 0; } EXPORT_SYMBOL_GPL(pci_disable_pasid); /** * pci_restore_pasid_state - Restore PASID capabilities * @pdev: PCI device structure */ void pci_restore_pasid_state(struct pci_dev *pdev) { u16 control; int pasid = pdev->pasid_cap; if (pdev->is_virtfn) return; if (!pdev->pasid_enabled) return; if (!pasid) return; control = PCI_PASID_CTRL_ENABLE | pdev->pasid_features; pci_write_config_word(pdev, pasid + PCI_PASID_CTRL, control); } /** * pci_pasid_features - Check which PASID features are supported * @pdev: PCI device structure * * Returns a negative value when no PASI capability is present. * Otherwise is returns a bitmask with supported features. Current * features reported are: * PCI_PASID_CAP_EXEC - Execute permission supported * PCI_PASID_CAP_PRIV - Privileged mode supported */ int pci_pasid_features(struct pci_dev *pdev) { u16 supported; int pasid; if (pdev->is_virtfn) pdev = pci_physfn(pdev); pasid = pdev->pasid_cap; if (!pasid) return -EINVAL; pci_read_config_word(pdev, pasid + PCI_PASID_CAP, &supported); supported &= PCI_PASID_CAP_EXEC | PCI_PASID_CAP_PRIV; return supported; } EXPORT_SYMBOL_GPL(pci_pasid_features); #define PASID_NUMBER_SHIFT 8 #define PASID_NUMBER_MASK (0x1f << PASID_NUMBER_SHIFT) /** * pci_max_pasid - Get maximum number of PASIDs supported by device * @pdev: PCI device structure * * Returns negative value when PASID capability is not present. * Otherwise it returns the number of supported PASIDs. */ int pci_max_pasids(struct pci_dev *pdev) { u16 supported; int pasid; if (pdev->is_virtfn) pdev = pci_physfn(pdev); pasid = pdev->pasid_cap; if (!pasid) return -EINVAL; pci_read_config_word(pdev, pasid + PCI_PASID_CAP, &supported); supported = (supported & PASID_NUMBER_MASK) >> PASID_NUMBER_SHIFT; return (1 << supported); } EXPORT_SYMBOL_GPL(pci_max_pasids); #endif /* CONFIG_PCI_PASID */