/* * linux/drivers/mmc/host/tmio_mmc_pio.c * * Copyright (C) 2011 Guennadi Liakhovetski * Copyright (C) 2007 Ian Molton * Copyright (C) 2004 Ian Molton * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. * * Driver for the MMC / SD / SDIO IP found in: * * TC6393XB, TC6391XB, TC6387XB, T7L66XB, ASIC3, SH-Mobile SoCs * * This driver draws mainly on scattered spec sheets, Reverse engineering * of the toshiba e800 SD driver and some parts of the 2.4 ASIC3 driver (4 bit * support). (Further 4 bit support from a later datasheet). * * TODO: * Investigate using a workqueue for PIO transfers * Eliminate FIXMEs * SDIO support * Better Power management * Handle MMC errors better * double buffer support * */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "tmio_mmc.h" void tmio_mmc_enable_mmc_irqs(struct tmio_mmc_host *host, u32 i) { host->sdcard_irq_mask &= ~(i & TMIO_MASK_IRQ); sd_ctrl_write32(host, CTL_IRQ_MASK, host->sdcard_irq_mask); } void tmio_mmc_disable_mmc_irqs(struct tmio_mmc_host *host, u32 i) { host->sdcard_irq_mask |= (i & TMIO_MASK_IRQ); sd_ctrl_write32(host, CTL_IRQ_MASK, host->sdcard_irq_mask); } static void tmio_mmc_ack_mmc_irqs(struct tmio_mmc_host *host, u32 i) { sd_ctrl_write32(host, CTL_STATUS, ~i); } static void tmio_mmc_init_sg(struct tmio_mmc_host *host, struct mmc_data *data) { host->sg_len = data->sg_len; host->sg_ptr = data->sg; host->sg_orig = data->sg; host->sg_off = 0; } static int tmio_mmc_next_sg(struct tmio_mmc_host *host) { host->sg_ptr = sg_next(host->sg_ptr); host->sg_off = 0; return --host->sg_len; } #ifdef CONFIG_MMC_DEBUG #define STATUS_TO_TEXT(a, status, i) \ do { \ if (status & TMIO_STAT_##a) { \ if (i++) \ printk(" | "); \ printk(#a); \ } \ } while (0) static void pr_debug_status(u32 status) { int i = 0; pr_debug("status: %08x = ", status); STATUS_TO_TEXT(CARD_REMOVE, status, i); STATUS_TO_TEXT(CARD_INSERT, status, i); STATUS_TO_TEXT(SIGSTATE, status, i); STATUS_TO_TEXT(WRPROTECT, status, i); STATUS_TO_TEXT(CARD_REMOVE_A, status, i); STATUS_TO_TEXT(CARD_INSERT_A, status, i); STATUS_TO_TEXT(SIGSTATE_A, status, i); STATUS_TO_TEXT(CMD_IDX_ERR, status, i); STATUS_TO_TEXT(STOPBIT_ERR, status, i); STATUS_TO_TEXT(ILL_FUNC, status, i); STATUS_TO_TEXT(CMD_BUSY, status, i); STATUS_TO_TEXT(CMDRESPEND, status, i); STATUS_TO_TEXT(DATAEND, status, i); STATUS_TO_TEXT(CRCFAIL, status, i); STATUS_TO_TEXT(DATATIMEOUT, status, i); STATUS_TO_TEXT(CMDTIMEOUT, status, i); STATUS_TO_TEXT(RXOVERFLOW, status, i); STATUS_TO_TEXT(TXUNDERRUN, status, i); STATUS_TO_TEXT(RXRDY, status, i); STATUS_TO_TEXT(TXRQ, status, i); STATUS_TO_TEXT(ILL_ACCESS, status, i); printk("\n"); } #else #define pr_debug_status(s) do { } while (0) #endif static void tmio_mmc_enable_sdio_irq(struct mmc_host *mmc, int enable) { struct tmio_mmc_host *host = mmc_priv(mmc); if (enable && !host->sdio_irq_enabled) { /* Keep device active while SDIO irq is enabled */ pm_runtime_get_sync(mmc_dev(mmc)); host->sdio_irq_enabled = true; host->sdio_irq_mask = TMIO_SDIO_MASK_ALL & ~TMIO_SDIO_STAT_IOIRQ; sd_ctrl_write16(host, CTL_TRANSACTION_CTL, 0x0001); sd_ctrl_write16(host, CTL_SDIO_IRQ_MASK, host->sdio_irq_mask); } else if (!enable && host->sdio_irq_enabled) { host->sdio_irq_mask = TMIO_SDIO_MASK_ALL; sd_ctrl_write16(host, CTL_SDIO_IRQ_MASK, host->sdio_irq_mask); sd_ctrl_write16(host, CTL_TRANSACTION_CTL, 0x0000); host->sdio_irq_enabled = false; pm_runtime_mark_last_busy(mmc_dev(mmc)); pm_runtime_put_autosuspend(mmc_dev(mmc)); } } static void tmio_mmc_set_clock(struct tmio_mmc_host *host, unsigned int new_clock) { u32 clk = 0, clock; if (new_clock) { for (clock = host->mmc->f_min, clk = 0x80000080; new_clock >= (clock<<1); clk >>= 1) clock <<= 1; /* 1/1 clock is option */ if ((host->pdata->flags & TMIO_MMC_CLK_ACTUAL) && ((clk >> 22) & 0x1)) clk |= 0xff; } if (host->set_clk_div) host->set_clk_div(host->pdev, (clk>>22) & 1); sd_ctrl_write16(host, CTL_SD_CARD_CLK_CTL, clk & 0x1ff); msleep(10); } static void tmio_mmc_clk_stop(struct tmio_mmc_host *host) { /* implicit BUG_ON(!res) */ if (host->pdata->flags & TMIO_MMC_HAVE_HIGH_REG) { sd_ctrl_write16(host, CTL_CLK_AND_WAIT_CTL, 0x0000); msleep(10); } sd_ctrl_write16(host, CTL_SD_CARD_CLK_CTL, ~0x0100 & sd_ctrl_read16(host, CTL_SD_CARD_CLK_CTL)); msleep(10); } static void tmio_mmc_clk_start(struct tmio_mmc_host *host) { sd_ctrl_write16(host, CTL_SD_CARD_CLK_CTL, 0x0100 | sd_ctrl_read16(host, CTL_SD_CARD_CLK_CTL)); msleep(10); /* implicit BUG_ON(!res) */ if (host->pdata->flags & TMIO_MMC_HAVE_HIGH_REG) { sd_ctrl_write16(host, CTL_CLK_AND_WAIT_CTL, 0x0100); msleep(10); } } static void tmio_mmc_reset(struct tmio_mmc_host *host) { /* FIXME - should we set stop clock reg here */ sd_ctrl_write16(host, CTL_RESET_SD, 0x0000); /* implicit BUG_ON(!res) */ if (host->pdata->flags & TMIO_MMC_HAVE_HIGH_REG) sd_ctrl_write16(host, CTL_RESET_SDIO, 0x0000); msleep(10); sd_ctrl_write16(host, CTL_RESET_SD, 0x0001); if (host->pdata->flags & TMIO_MMC_HAVE_HIGH_REG) sd_ctrl_write16(host, CTL_RESET_SDIO, 0x0001); msleep(10); } static void tmio_mmc_reset_work(struct work_struct *work) { struct tmio_mmc_host *host = container_of(work, struct tmio_mmc_host, delayed_reset_work.work); struct mmc_request *mrq; unsigned long flags; spin_lock_irqsave(&host->lock, flags); mrq = host->mrq; /* * is request already finished? Since we use a non-blocking * cancel_delayed_work(), it can happen, that a .set_ios() call preempts * us, so, have to check for IS_ERR(host->mrq) */ if (IS_ERR_OR_NULL(mrq) || time_is_after_jiffies(host->last_req_ts + msecs_to_jiffies(2000))) { spin_unlock_irqrestore(&host->lock, flags); return; } dev_warn(&host->pdev->dev, "timeout waiting for hardware interrupt (CMD%u)\n", mrq->cmd->opcode); if (host->data) host->data->error = -ETIMEDOUT; else if (host->cmd) host->cmd->error = -ETIMEDOUT; else mrq->cmd->error = -ETIMEDOUT; host->cmd = NULL; host->data = NULL; host->force_pio = false; spin_unlock_irqrestore(&host->lock, flags); tmio_mmc_reset(host); /* Ready for new calls */ host->mrq = NULL; tmio_mmc_abort_dma(host); mmc_request_done(host->mmc, mrq); pm_runtime_mark_last_busy(mmc_dev(host->mmc)); pm_runtime_put_autosuspend(mmc_dev(host->mmc)); } /* called with host->lock held, interrupts disabled */ static void tmio_mmc_finish_request(struct tmio_mmc_host *host) { struct mmc_request *mrq; unsigned long flags; spin_lock_irqsave(&host->lock, flags); mrq = host->mrq; if (IS_ERR_OR_NULL(mrq)) { spin_unlock_irqrestore(&host->lock, flags); return; } host->cmd = NULL; host->data = NULL; host->force_pio = false; cancel_delayed_work(&host->delayed_reset_work); host->mrq = NULL; spin_unlock_irqrestore(&host->lock, flags); if (mrq->cmd->error || (mrq->data && mrq->data->error)) tmio_mmc_abort_dma(host); mmc_request_done(host->mmc, mrq); pm_runtime_mark_last_busy(mmc_dev(host->mmc)); pm_runtime_put_autosuspend(mmc_dev(host->mmc)); } static void tmio_mmc_done_work(struct work_struct *work) { struct tmio_mmc_host *host = container_of(work, struct tmio_mmc_host, done); tmio_mmc_finish_request(host); } /* These are the bitmasks the tmio chip requires to implement the MMC response * types. Note that R1 and R6 are the same in this scheme. */ #define APP_CMD 0x0040 #define RESP_NONE 0x0300 #define RESP_R1 0x0400 #define RESP_R1B 0x0500 #define RESP_R2 0x0600 #define RESP_R3 0x0700 #define DATA_PRESENT 0x0800 #define TRANSFER_READ 0x1000 #define TRANSFER_MULTI 0x2000 #define SECURITY_CMD 0x4000 #define NO_CMD12_ISSUE 0x4000 /* TMIO_MMC_HAVE_CMD12_CTRL */ static int tmio_mmc_start_command(struct tmio_mmc_host *host, struct mmc_command *cmd) { struct mmc_data *data = host->data; int c = cmd->opcode; u32 irq_mask = TMIO_MASK_CMD; /* CMD12 is handled by hardware */ if (cmd->opcode == MMC_STOP_TRANSMISSION && !cmd->arg) { sd_ctrl_write16(host, CTL_STOP_INTERNAL_ACTION, 0x001); return 0; } switch (mmc_resp_type(cmd)) { case MMC_RSP_NONE: c |= RESP_NONE; break; case MMC_RSP_R1: c |= RESP_R1; break; case MMC_RSP_R1B: c |= RESP_R1B; break; case MMC_RSP_R2: c |= RESP_R2; break; case MMC_RSP_R3: c |= RESP_R3; break; default: pr_debug("Unknown response type %d\n", mmc_resp_type(cmd)); return -EINVAL; } host->cmd = cmd; /* FIXME - this seems to be ok commented out but the spec suggest this bit * should be set when issuing app commands. * if(cmd->flags & MMC_FLAG_ACMD) * c |= APP_CMD; */ if (data) { c |= DATA_PRESENT; if (data->blocks > 1) { sd_ctrl_write16(host, CTL_STOP_INTERNAL_ACTION, 0x100); c |= TRANSFER_MULTI; /* * Disable auto CMD12 at IO_RW_EXTENDED when * multiple block transfer */ if ((host->pdata->flags & TMIO_MMC_HAVE_CMD12_CTRL) && (cmd->opcode == SD_IO_RW_EXTENDED)) c |= NO_CMD12_ISSUE; } if (data->flags & MMC_DATA_READ) c |= TRANSFER_READ; } if (!host->native_hotplug) irq_mask &= ~(TMIO_STAT_CARD_REMOVE | TMIO_STAT_CARD_INSERT); tmio_mmc_enable_mmc_irqs(host, irq_mask); /* Fire off the command */ sd_ctrl_write32(host, CTL_ARG_REG, cmd->arg); sd_ctrl_write16(host, CTL_SD_CMD, c); return 0; } /* * This chip always returns (at least?) as much data as you ask for. * I'm unsure what happens if you ask for less than a block. This should be * looked into to ensure that a funny length read doesn't hose the controller. */ static void tmio_mmc_pio_irq(struct tmio_mmc_host *host) { struct mmc_data *data = host->data; void *sg_virt; unsigned short *buf; unsigned int count; unsigned long flags; if ((host->chan_tx || host->chan_rx) && !host->force_pio) { pr_err("PIO IRQ in DMA mode!\n"); return; } else if (!data) { pr_debug("Spurious PIO IRQ\n"); return; } sg_virt = tmio_mmc_kmap_atomic(host->sg_ptr, &flags); buf = (unsigned short *)(sg_virt + host->sg_off); count = host->sg_ptr->length - host->sg_off; if (count > data->blksz) count = data->blksz; pr_debug("count: %08x offset: %08x flags %08x\n", count, host->sg_off, data->flags); /* Transfer the data */ if (data->flags & MMC_DATA_READ) sd_ctrl_read16_rep(host, CTL_SD_DATA_PORT, buf, count >> 1); else sd_ctrl_write16_rep(host, CTL_SD_DATA_PORT, buf, count >> 1); host->sg_off += count; tmio_mmc_kunmap_atomic(host->sg_ptr, &flags, sg_virt); if (host->sg_off == host->sg_ptr->length) tmio_mmc_next_sg(host); return; } static void tmio_mmc_check_bounce_buffer(struct tmio_mmc_host *host) { if (host->sg_ptr == &host->bounce_sg) { unsigned long flags; void *sg_vaddr = tmio_mmc_kmap_atomic(host->sg_orig, &flags); memcpy(sg_vaddr, host->bounce_buf, host->bounce_sg.length); tmio_mmc_kunmap_atomic(host->sg_orig, &flags, sg_vaddr); } } /* needs to be called with host->lock held */ void tmio_mmc_do_data_irq(struct tmio_mmc_host *host) { struct mmc_data *data = host->data; struct mmc_command *stop; host->data = NULL; if (!data) { dev_warn(&host->pdev->dev, "Spurious data end IRQ\n"); return; } stop = data->stop; /* FIXME - return correct transfer count on errors */ if (!data->error) data->bytes_xfered = data->blocks * data->blksz; else data->bytes_xfered = 0; pr_debug("Completed data request\n"); /* * FIXME: other drivers allow an optional stop command of any given type * which we dont do, as the chip can auto generate them. * Perhaps we can be smarter about when to use auto CMD12 and * only issue the auto request when we know this is the desired * stop command, allowing fallback to the stop command the * upper layers expect. For now, we do what works. */ if (data->flags & MMC_DATA_READ) { if (host->chan_rx && !host->force_pio) tmio_mmc_check_bounce_buffer(host); dev_dbg(&host->pdev->dev, "Complete Rx request %p\n", host->mrq); } else { dev_dbg(&host->pdev->dev, "Complete Tx request %p\n", host->mrq); } if (stop) { if (stop->opcode == MMC_STOP_TRANSMISSION && !stop->arg) sd_ctrl_write16(host, CTL_STOP_INTERNAL_ACTION, 0x000); else BUG(); } schedule_work(&host->done); } static void tmio_mmc_data_irq(struct tmio_mmc_host *host) { struct mmc_data *data; spin_lock(&host->lock); data = host->data; if (!data) goto out; if (host->chan_tx && (data->flags & MMC_DATA_WRITE) && !host->force_pio) { u32 status = sd_ctrl_read32(host, CTL_STATUS); bool done = false; /* * Has all data been written out yet? Testing on SuperH showed, * that in most cases the first interrupt comes already with the * BUSY status bit clear, but on some operations, like mount or * in the beginning of a write / sync / umount, there is one * DATAEND interrupt with the BUSY bit set, in this cases * waiting for one more interrupt fixes the problem. */ if (host->pdata->flags & TMIO_MMC_HAS_IDLE_WAIT) { if (status & TMIO_STAT_ILL_FUNC) done = true; } else { if (!(status & TMIO_STAT_CMD_BUSY)) done = true; } if (done) { tmio_mmc_disable_mmc_irqs(host, TMIO_STAT_DATAEND); tasklet_schedule(&host->dma_complete); } } else if (host->chan_rx && (data->flags & MMC_DATA_READ) && !host->force_pio) { tmio_mmc_disable_mmc_irqs(host, TMIO_STAT_DATAEND); tasklet_schedule(&host->dma_complete); } else { tmio_mmc_do_data_irq(host); tmio_mmc_disable_mmc_irqs(host, TMIO_MASK_READOP | TMIO_MASK_WRITEOP); } out: spin_unlock(&host->lock); } static void tmio_mmc_cmd_irq(struct tmio_mmc_host *host, unsigned int stat) { struct mmc_command *cmd = host->cmd; int i, addr; spin_lock(&host->lock); if (!host->cmd) { pr_debug("Spurious CMD irq\n"); goto out; } host->cmd = NULL; /* This controller is sicker than the PXA one. Not only do we need to * drop the top 8 bits of the first response word, we also need to * modify the order of the response for short response command types. */ for (i = 3, addr = CTL_RESPONSE ; i >= 0 ; i--, addr += 4) cmd->resp[i] = sd_ctrl_read32(host, addr); if (cmd->flags & MMC_RSP_136) { cmd->resp[0] = (cmd->resp[0] << 8) | (cmd->resp[1] >> 24); cmd->resp[1] = (cmd->resp[1] << 8) | (cmd->resp[2] >> 24); cmd->resp[2] = (cmd->resp[2] << 8) | (cmd->resp[3] >> 24); cmd->resp[3] <<= 8; } else if (cmd->flags & MMC_RSP_R3) { cmd->resp[0] = cmd->resp[3]; } if (stat & TMIO_STAT_CMDTIMEOUT) cmd->error = -ETIMEDOUT; else if (stat & TMIO_STAT_CRCFAIL && cmd->flags & MMC_RSP_CRC) cmd->error = -EILSEQ; /* If there is data to handle we enable data IRQs here, and * we will ultimatley finish the request in the data_end handler. * If theres no data or we encountered an error, finish now. */ if (host->data && !cmd->error) { if (host->data->flags & MMC_DATA_READ) { if (host->force_pio || !host->chan_rx) tmio_mmc_enable_mmc_irqs(host, TMIO_MASK_READOP); else tasklet_schedule(&host->dma_issue); } else { if (host->force_pio || !host->chan_tx) tmio_mmc_enable_mmc_irqs(host, TMIO_MASK_WRITEOP); else tasklet_schedule(&host->dma_issue); } } else { schedule_work(&host->done); } out: spin_unlock(&host->lock); } static void tmio_mmc_card_irq_status(struct tmio_mmc_host *host, int *ireg, int *status) { *status = sd_ctrl_read32(host, CTL_STATUS); *ireg = *status & TMIO_MASK_IRQ & ~host->sdcard_irq_mask; pr_debug_status(*status); pr_debug_status(*ireg); /* Clear the status except the interrupt status */ sd_ctrl_write32(host, CTL_STATUS, TMIO_MASK_IRQ); } static bool __tmio_mmc_card_detect_irq(struct tmio_mmc_host *host, int ireg, int status) { struct mmc_host *mmc = host->mmc; /* Card insert / remove attempts */ if (ireg & (TMIO_STAT_CARD_INSERT | TMIO_STAT_CARD_REMOVE)) { tmio_mmc_ack_mmc_irqs(host, TMIO_STAT_CARD_INSERT | TMIO_STAT_CARD_REMOVE); if ((((ireg & TMIO_STAT_CARD_REMOVE) && mmc->card) || ((ireg & TMIO_STAT_CARD_INSERT) && !mmc->card)) && !work_pending(&mmc->detect.work)) mmc_detect_change(host->mmc, msecs_to_jiffies(100)); return true; } return false; } irqreturn_t tmio_mmc_card_detect_irq(int irq, void *devid) { unsigned int ireg, status; struct tmio_mmc_host *host = devid; tmio_mmc_card_irq_status(host, &ireg, &status); __tmio_mmc_card_detect_irq(host, ireg, status); return IRQ_HANDLED; } EXPORT_SYMBOL(tmio_mmc_card_detect_irq); static bool __tmio_mmc_sdcard_irq(struct tmio_mmc_host *host, int ireg, int status) { /* Command completion */ if (ireg & (TMIO_STAT_CMDRESPEND | TMIO_STAT_CMDTIMEOUT)) { tmio_mmc_ack_mmc_irqs(host, TMIO_STAT_CMDRESPEND | TMIO_STAT_CMDTIMEOUT); tmio_mmc_cmd_irq(host, status); return true; } /* Data transfer */ if (ireg & (TMIO_STAT_RXRDY | TMIO_STAT_TXRQ)) { tmio_mmc_ack_mmc_irqs(host, TMIO_STAT_RXRDY | TMIO_STAT_TXRQ); tmio_mmc_pio_irq(host); return true; } /* Data transfer completion */ if (ireg & TMIO_STAT_DATAEND) { tmio_mmc_ack_mmc_irqs(host, TMIO_STAT_DATAEND); tmio_mmc_data_irq(host); return true; } return false; } irqreturn_t tmio_mmc_sdcard_irq(int irq, void *devid) { unsigned int ireg, status; struct tmio_mmc_host *host = devid; tmio_mmc_card_irq_status(host, &ireg, &status); __tmio_mmc_sdcard_irq(host, ireg, status); return IRQ_HANDLED; } EXPORT_SYMBOL(tmio_mmc_sdcard_irq); irqreturn_t tmio_mmc_sdio_irq(int irq, void *devid) { struct tmio_mmc_host *host = devid; struct mmc_host *mmc = host->mmc; struct tmio_mmc_data *pdata = host->pdata; unsigned int ireg, status; unsigned int sdio_status; if (!(pdata->flags & TMIO_MMC_SDIO_IRQ)) return IRQ_HANDLED; status = sd_ctrl_read16(host, CTL_SDIO_STATUS); ireg = status & TMIO_SDIO_MASK_ALL & ~host->sdcard_irq_mask; sdio_status = status & ~TMIO_SDIO_MASK_ALL; if (pdata->flags & TMIO_MMC_SDIO_STATUS_QUIRK) sdio_status |= 6; sd_ctrl_write16(host, CTL_SDIO_STATUS, sdio_status); if (mmc->caps & MMC_CAP_SDIO_IRQ && ireg & TMIO_SDIO_STAT_IOIRQ) mmc_signal_sdio_irq(mmc); return IRQ_HANDLED; } EXPORT_SYMBOL(tmio_mmc_sdio_irq); irqreturn_t tmio_mmc_irq(int irq, void *devid) { struct tmio_mmc_host *host = devid; unsigned int ireg, status; pr_debug("MMC IRQ begin\n"); tmio_mmc_card_irq_status(host, &ireg, &status); if (__tmio_mmc_card_detect_irq(host, ireg, status)) return IRQ_HANDLED; if (__tmio_mmc_sdcard_irq(host, ireg, status)) return IRQ_HANDLED; tmio_mmc_sdio_irq(irq, devid); return IRQ_HANDLED; } EXPORT_SYMBOL(tmio_mmc_irq); static int tmio_mmc_start_data(struct tmio_mmc_host *host, struct mmc_data *data) { struct tmio_mmc_data *pdata = host->pdata; pr_debug("setup data transfer: blocksize %08x nr_blocks %d\n", data->blksz, data->blocks); /* Some hardware cannot perform 2 byte requests in 4 bit mode */ if (host->mmc->ios.bus_width == MMC_BUS_WIDTH_4) { int blksz_2bytes = pdata->flags & TMIO_MMC_BLKSZ_2BYTES; if (data->blksz < 2 || (data->blksz < 4 && !blksz_2bytes)) { pr_err("%s: %d byte block unsupported in 4 bit mode\n", mmc_hostname(host->mmc), data->blksz); return -EINVAL; } } tmio_mmc_init_sg(host, data); host->data = data; /* Set transfer length / blocksize */ sd_ctrl_write16(host, CTL_SD_XFER_LEN, data->blksz); sd_ctrl_write16(host, CTL_XFER_BLK_COUNT, data->blocks); tmio_mmc_start_dma(host, data); return 0; } /* Process requests from the MMC layer */ static void tmio_mmc_request(struct mmc_host *mmc, struct mmc_request *mrq) { struct tmio_mmc_host *host = mmc_priv(mmc); unsigned long flags; int ret; spin_lock_irqsave(&host->lock, flags); if (host->mrq) { pr_debug("request not null\n"); if (IS_ERR(host->mrq)) { spin_unlock_irqrestore(&host->lock, flags); mrq->cmd->error = -EAGAIN; mmc_request_done(mmc, mrq); return; } } host->last_req_ts = jiffies; wmb(); host->mrq = mrq; spin_unlock_irqrestore(&host->lock, flags); pm_runtime_get_sync(mmc_dev(mmc)); if (mrq->data) { ret = tmio_mmc_start_data(host, mrq->data); if (ret) goto fail; } ret = tmio_mmc_start_command(host, mrq->cmd); if (!ret) { schedule_delayed_work(&host->delayed_reset_work, msecs_to_jiffies(2000)); return; } fail: host->force_pio = false; host->mrq = NULL; mrq->cmd->error = ret; mmc_request_done(mmc, mrq); pm_runtime_mark_last_busy(mmc_dev(mmc)); pm_runtime_put_autosuspend(mmc_dev(mmc)); } static int tmio_mmc_clk_update(struct tmio_mmc_host *host) { struct mmc_host *mmc = host->mmc; struct tmio_mmc_data *pdata = host->pdata; int ret; if (!pdata->clk_enable) return -ENOTSUPP; ret = pdata->clk_enable(host->pdev, &mmc->f_max); if (!ret) mmc->f_min = mmc->f_max / 512; return ret; } static void tmio_mmc_power_on(struct tmio_mmc_host *host, unsigned short vdd) { struct mmc_host *mmc = host->mmc; int ret = 0; /* .set_ios() is returning void, so, no chance to report an error */ if (host->set_pwr) host->set_pwr(host->pdev, 1); if (!IS_ERR(mmc->supply.vmmc)) { ret = mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, vdd); /* * Attention: empiric value. With a b43 WiFi SDIO card this * delay proved necessary for reliable card-insertion probing. * 100us were not enough. Is this the same 140us delay, as in * tmio_mmc_set_ios()? */ udelay(200); } /* * It seems, VccQ should be switched on after Vcc, this is also what the * omap_hsmmc.c driver does. */ if (!IS_ERR(mmc->supply.vqmmc) && !ret) { ret = regulator_enable(mmc->supply.vqmmc); udelay(200); } if (ret < 0) dev_dbg(&host->pdev->dev, "Regulators failed to power up: %d\n", ret); } static void tmio_mmc_power_off(struct tmio_mmc_host *host) { struct mmc_host *mmc = host->mmc; if (!IS_ERR(mmc->supply.vqmmc)) regulator_disable(mmc->supply.vqmmc); if (!IS_ERR(mmc->supply.vmmc)) mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, 0); if (host->set_pwr) host->set_pwr(host->pdev, 0); } static void tmio_mmc_set_bus_width(struct tmio_mmc_host *host, unsigned char bus_width) { switch (bus_width) { case MMC_BUS_WIDTH_1: sd_ctrl_write16(host, CTL_SD_MEM_CARD_OPT, 0x80e0); break; case MMC_BUS_WIDTH_4: sd_ctrl_write16(host, CTL_SD_MEM_CARD_OPT, 0x00e0); break; } } /* Set MMC clock / power. * Note: This controller uses a simple divider scheme therefore it cannot * run a MMC card at full speed (20MHz). The max clock is 24MHz on SD, but as * MMC wont run that fast, it has to be clocked at 12MHz which is the next * slowest setting. */ static void tmio_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) { struct tmio_mmc_host *host = mmc_priv(mmc); struct device *dev = &host->pdev->dev; unsigned long flags; pm_runtime_get_sync(mmc_dev(mmc)); mutex_lock(&host->ios_lock); spin_lock_irqsave(&host->lock, flags); if (host->mrq) { if (IS_ERR(host->mrq)) { dev_dbg(dev, "%s.%d: concurrent .set_ios(), clk %u, mode %u\n", current->comm, task_pid_nr(current), ios->clock, ios->power_mode); host->mrq = ERR_PTR(-EINTR); } else { dev_dbg(dev, "%s.%d: CMD%u active since %lu, now %lu!\n", current->comm, task_pid_nr(current), host->mrq->cmd->opcode, host->last_req_ts, jiffies); } spin_unlock_irqrestore(&host->lock, flags); mutex_unlock(&host->ios_lock); return; } host->mrq = ERR_PTR(-EBUSY); spin_unlock_irqrestore(&host->lock, flags); switch (ios->power_mode) { case MMC_POWER_OFF: tmio_mmc_power_off(host); tmio_mmc_clk_stop(host); break; case MMC_POWER_UP: tmio_mmc_set_clock(host, ios->clock); tmio_mmc_power_on(host, ios->vdd); tmio_mmc_clk_start(host); tmio_mmc_set_bus_width(host, ios->bus_width); break; case MMC_POWER_ON: tmio_mmc_set_clock(host, ios->clock); tmio_mmc_clk_start(host); tmio_mmc_set_bus_width(host, ios->bus_width); break; } /* Let things settle. delay taken from winCE driver */ udelay(140); if (PTR_ERR(host->mrq) == -EINTR) dev_dbg(&host->pdev->dev, "%s.%d: IOS interrupted: clk %u, mode %u", current->comm, task_pid_nr(current), ios->clock, ios->power_mode); host->mrq = NULL; host->clk_cache = ios->clock; mutex_unlock(&host->ios_lock); pm_runtime_mark_last_busy(mmc_dev(mmc)); pm_runtime_put_autosuspend(mmc_dev(mmc)); } static int tmio_mmc_get_ro(struct mmc_host *mmc) { struct tmio_mmc_host *host = mmc_priv(mmc); struct tmio_mmc_data *pdata = host->pdata; int ret = mmc_gpio_get_ro(mmc); if (ret >= 0) return ret; pm_runtime_get_sync(mmc_dev(mmc)); ret = !((pdata->flags & TMIO_MMC_WRPROTECT_DISABLE) || (sd_ctrl_read32(host, CTL_STATUS) & TMIO_STAT_WRPROTECT)); pm_runtime_mark_last_busy(mmc_dev(mmc)); pm_runtime_put_autosuspend(mmc_dev(mmc)); return ret; } static const struct mmc_host_ops tmio_mmc_ops = { .request = tmio_mmc_request, .set_ios = tmio_mmc_set_ios, .get_ro = tmio_mmc_get_ro, .get_cd = mmc_gpio_get_cd, .enable_sdio_irq = tmio_mmc_enable_sdio_irq, }; static int tmio_mmc_init_ocr(struct tmio_mmc_host *host) { struct tmio_mmc_data *pdata = host->pdata; struct mmc_host *mmc = host->mmc; mmc_regulator_get_supply(mmc); /* use ocr_mask if no regulator */ if (!mmc->ocr_avail) mmc->ocr_avail = pdata->ocr_mask; /* * try again. * There is possibility that regulator has not been probed */ if (!mmc->ocr_avail) return -EPROBE_DEFER; return 0; } static void tmio_mmc_of_parse(struct platform_device *pdev, struct tmio_mmc_data *pdata) { const struct device_node *np = pdev->dev.of_node; if (!np) return; if (of_get_property(np, "toshiba,mmc-wrprotect-disable", NULL)) pdata->flags |= TMIO_MMC_WRPROTECT_DISABLE; } int tmio_mmc_host_probe(struct tmio_mmc_host **host, struct platform_device *pdev, struct tmio_mmc_data *pdata) { struct tmio_mmc_host *_host; struct mmc_host *mmc; struct resource *res_ctl; int ret; u32 irq_mask = TMIO_MASK_CMD; tmio_mmc_of_parse(pdev, pdata); if (!(pdata->flags & TMIO_MMC_HAS_IDLE_WAIT)) pdata->write16_hook = NULL; res_ctl = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (!res_ctl) return -EINVAL; mmc = mmc_alloc_host(sizeof(struct tmio_mmc_host), &pdev->dev); if (!mmc) return -ENOMEM; ret = mmc_of_parse(mmc); if (ret < 0) goto host_free; pdata->dev = &pdev->dev; _host = mmc_priv(mmc); _host->pdata = pdata; _host->mmc = mmc; _host->pdev = pdev; platform_set_drvdata(pdev, mmc); _host->set_pwr = pdata->set_pwr; _host->set_clk_div = pdata->set_clk_div; ret = tmio_mmc_init_ocr(_host); if (ret < 0) goto host_free; _host->ctl = ioremap(res_ctl->start, resource_size(res_ctl)); if (!_host->ctl) { ret = -ENOMEM; goto host_free; } mmc->ops = &tmio_mmc_ops; mmc->caps |= MMC_CAP_4_BIT_DATA | pdata->capabilities; mmc->caps2 |= pdata->capabilities2; mmc->max_segs = 32; mmc->max_blk_size = 512; mmc->max_blk_count = (PAGE_CACHE_SIZE / mmc->max_blk_size) * mmc->max_segs; mmc->max_req_size = mmc->max_blk_size * mmc->max_blk_count; mmc->max_seg_size = mmc->max_req_size; _host->native_hotplug = !(pdata->flags & TMIO_MMC_USE_GPIO_CD || mmc->caps & MMC_CAP_NEEDS_POLL || mmc->caps & MMC_CAP_NONREMOVABLE || mmc->slot.cd_irq >= 0); if (tmio_mmc_clk_update(_host) < 0) { mmc->f_max = pdata->hclk; mmc->f_min = mmc->f_max / 512; } /* * While using internal tmio hardware logic for card detection, we need * to ensure it stays powered for it to work. */ if (_host->native_hotplug) pm_runtime_get_noresume(&pdev->dev); tmio_mmc_clk_stop(_host); tmio_mmc_reset(_host); _host->sdcard_irq_mask = sd_ctrl_read32(_host, CTL_IRQ_MASK); tmio_mmc_disable_mmc_irqs(_host, TMIO_MASK_ALL); /* Unmask the IRQs we want to know about */ if (!_host->chan_rx) irq_mask |= TMIO_MASK_READOP; if (!_host->chan_tx) irq_mask |= TMIO_MASK_WRITEOP; if (!_host->native_hotplug) irq_mask &= ~(TMIO_STAT_CARD_REMOVE | TMIO_STAT_CARD_INSERT); _host->sdcard_irq_mask &= ~irq_mask; _host->sdio_irq_enabled = false; if (pdata->flags & TMIO_MMC_SDIO_IRQ) { _host->sdio_irq_mask = TMIO_SDIO_MASK_ALL; sd_ctrl_write16(_host, CTL_SDIO_IRQ_MASK, _host->sdio_irq_mask); sd_ctrl_write16(_host, CTL_TRANSACTION_CTL, 0x0000); } spin_lock_init(&_host->lock); mutex_init(&_host->ios_lock); /* Init delayed work for request timeouts */ INIT_DELAYED_WORK(&_host->delayed_reset_work, tmio_mmc_reset_work); INIT_WORK(&_host->done, tmio_mmc_done_work); /* See if we also get DMA */ tmio_mmc_request_dma(_host, pdata); pm_runtime_set_active(&pdev->dev); pm_runtime_set_autosuspend_delay(&pdev->dev, 50); pm_runtime_use_autosuspend(&pdev->dev); pm_runtime_enable(&pdev->dev); ret = mmc_add_host(mmc); if (ret < 0) { tmio_mmc_host_remove(_host); return ret; } dev_pm_qos_expose_latency_limit(&pdev->dev, 100); if (pdata->flags & TMIO_MMC_USE_GPIO_CD) { ret = mmc_gpio_request_cd(mmc, pdata->cd_gpio, 0); if (ret < 0) { tmio_mmc_host_remove(_host); return ret; } } *host = _host; return 0; host_free: mmc_free_host(mmc); return ret; } EXPORT_SYMBOL(tmio_mmc_host_probe); void tmio_mmc_host_remove(struct tmio_mmc_host *host) { struct platform_device *pdev = host->pdev; struct mmc_host *mmc = host->mmc; if (!host->native_hotplug) pm_runtime_get_sync(&pdev->dev); dev_pm_qos_hide_latency_limit(&pdev->dev); mmc_remove_host(mmc); cancel_work_sync(&host->done); cancel_delayed_work_sync(&host->delayed_reset_work); tmio_mmc_release_dma(host); pm_runtime_put_sync(&pdev->dev); pm_runtime_disable(&pdev->dev); iounmap(host->ctl); mmc_free_host(mmc); } EXPORT_SYMBOL(tmio_mmc_host_remove); #ifdef CONFIG_PM int tmio_mmc_host_runtime_suspend(struct device *dev) { struct mmc_host *mmc = dev_get_drvdata(dev); struct tmio_mmc_host *host = mmc_priv(mmc); tmio_mmc_disable_mmc_irqs(host, TMIO_MASK_ALL); if (host->clk_cache) tmio_mmc_clk_stop(host); if (host->pdata->clk_disable) host->pdata->clk_disable(host->pdev); return 0; } EXPORT_SYMBOL(tmio_mmc_host_runtime_suspend); int tmio_mmc_host_runtime_resume(struct device *dev) { struct mmc_host *mmc = dev_get_drvdata(dev); struct tmio_mmc_host *host = mmc_priv(mmc); tmio_mmc_reset(host); tmio_mmc_clk_update(host); if (host->clk_cache) { tmio_mmc_set_clock(host, host->clk_cache); tmio_mmc_clk_start(host); } tmio_mmc_enable_dma(host, true); return 0; } EXPORT_SYMBOL(tmio_mmc_host_runtime_resume); #endif MODULE_LICENSE("GPL v2");