/** * IBM Accelerator Family 'GenWQE' * * (C) Copyright IBM Corp. 2013 * * Author: Frank Haverkamp * Author: Joerg-Stephan Vogt * Author: Michael Jung * Author: Michael Ruettger * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License (version 2 only) * as published by the Free Software Foundation. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. */ /* * Device Driver Control Block (DDCB) queue support. Definition of * interrupt handlers for queue support as well as triggering the * health monitor code in case of problems. The current hardware uses * an MSI interrupt which is shared between error handling and * functional code. */ #include #include #include #include #include #include #include #include #include #include #include #include "card_ddcb.h" /* * N: next DDCB, this is where the next DDCB will be put. * A: active DDCB, this is where the code will look for the next completion. * x: DDCB is enqueued, we are waiting for its completion. * Situation (1): Empty queue * +---+---+---+---+---+---+---+---+ * | 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | * | | | | | | | | | * +---+---+---+---+---+---+---+---+ * A/N * enqueued_ddcbs = A - N = 2 - 2 = 0 * * Situation (2): Wrapped, N > A * +---+---+---+---+---+---+---+---+ * | 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | * | | | x | x | | | | | * +---+---+---+---+---+---+---+---+ * A N * enqueued_ddcbs = N - A = 4 - 2 = 2 * * Situation (3): Queue wrapped, A > N * +---+---+---+---+---+---+---+---+ * | 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | * | x | x | | | x | x | x | x | * +---+---+---+---+---+---+---+---+ * N A * enqueued_ddcbs = queue_max - (A - N) = 8 - (4 - 2) = 6 * * Situation (4a): Queue full N > A * +---+---+---+---+---+---+---+---+ * | 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | * | x | x | x | x | x | x | x | | * +---+---+---+---+---+---+---+---+ * A N * * enqueued_ddcbs = N - A = 7 - 0 = 7 * * Situation (4a): Queue full A > N * +---+---+---+---+---+---+---+---+ * | 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | * | x | x | x | | x | x | x | x | * +---+---+---+---+---+---+---+---+ * N A * enqueued_ddcbs = queue_max - (A - N) = 8 - (4 - 3) = 7 */ static int queue_empty(struct ddcb_queue *queue) { return queue->ddcb_next == queue->ddcb_act; } static int queue_enqueued_ddcbs(struct ddcb_queue *queue) { if (queue->ddcb_next >= queue->ddcb_act) return queue->ddcb_next - queue->ddcb_act; return queue->ddcb_max - (queue->ddcb_act - queue->ddcb_next); } static int queue_free_ddcbs(struct ddcb_queue *queue) { int free_ddcbs = queue->ddcb_max - queue_enqueued_ddcbs(queue) - 1; if (WARN_ON_ONCE(free_ddcbs < 0)) { /* must never ever happen! */ return 0; } return free_ddcbs; } /* * Use of the PRIV field in the DDCB for queue debugging: * * (1) Trying to get rid of a DDCB which saw a timeout: * pddcb->priv[6] = 0xcc; # cleared * * (2) Append a DDCB via NEXT bit: * pddcb->priv[7] = 0xaa; # appended * * (3) DDCB needed tapping: * pddcb->priv[7] = 0xbb; # tapped * * (4) DDCB marked as correctly finished: * pddcb->priv[6] = 0xff; # finished */ static inline void ddcb_mark_tapped(struct ddcb *pddcb) { pddcb->priv[7] = 0xbb; /* tapped */ } static inline void ddcb_mark_appended(struct ddcb *pddcb) { pddcb->priv[7] = 0xaa; /* appended */ } static inline void ddcb_mark_cleared(struct ddcb *pddcb) { pddcb->priv[6] = 0xcc; /* cleared */ } static inline void ddcb_mark_finished(struct ddcb *pddcb) { pddcb->priv[6] = 0xff; /* finished */ } static inline void ddcb_mark_unused(struct ddcb *pddcb) { pddcb->priv_64 = cpu_to_be64(0); /* not tapped */ } /** * genwqe_crc16() - Generate 16-bit crc as required for DDCBs * @buff: pointer to data buffer * @len: length of data for calculation * @init: initial crc (0xffff at start) * * Polynomial = x^16 + x^12 + x^5 + 1 (0x1021) * Example: 4 bytes 0x01 0x02 0x03 0x04 with init = 0xffff * should result in a crc16 of 0x89c3 * * Return: crc16 checksum in big endian format ! */ static inline u16 genwqe_crc16(const u8 *buff, size_t len, u16 init) { return crc_itu_t(init, buff, len); } static void print_ddcb_info(struct genwqe_dev *cd, struct ddcb_queue *queue) { int i; struct ddcb *pddcb; unsigned long flags; struct pci_dev *pci_dev = cd->pci_dev; spin_lock_irqsave(&cd->print_lock, flags); dev_info(&pci_dev->dev, "DDCB list for card #%d (ddcb_act=%d / ddcb_next=%d):\n", cd->card_idx, queue->ddcb_act, queue->ddcb_next); pddcb = queue->ddcb_vaddr; for (i = 0; i < queue->ddcb_max; i++) { dev_err(&pci_dev->dev, " %c %-3d: RETC=%03x SEQ=%04x " "HSI=%02X SHI=%02x PRIV=%06llx CMD=%03x\n", i == queue->ddcb_act ? '>' : ' ', i, be16_to_cpu(pddcb->retc_16), be16_to_cpu(pddcb->seqnum_16), pddcb->hsi, pddcb->shi, be64_to_cpu(pddcb->priv_64), pddcb->cmd); pddcb++; } spin_unlock_irqrestore(&cd->print_lock, flags); } struct genwqe_ddcb_cmd *ddcb_requ_alloc(void) { struct ddcb_requ *req; req = kzalloc(sizeof(*req), GFP_ATOMIC); if (!req) return NULL; return &req->cmd; } void ddcb_requ_free(struct genwqe_ddcb_cmd *cmd) { struct ddcb_requ *req = container_of(cmd, struct ddcb_requ, cmd); kfree(req); } static inline enum genwqe_requ_state ddcb_requ_get_state(struct ddcb_requ *req) { return req->req_state; } static inline void ddcb_requ_set_state(struct ddcb_requ *req, enum genwqe_requ_state new_state) { req->req_state = new_state; } static inline int ddcb_requ_collect_debug_data(struct ddcb_requ *req) { return req->cmd.ddata_addr != 0x0; } /** * ddcb_requ_finished() - Returns the hardware state of the associated DDCB * @cd: pointer to genwqe device descriptor * @req: DDCB work request * * Status of ddcb_requ mirrors this hardware state, but is copied in * the ddcb_requ on interrupt/polling function. The lowlevel code * should check the hardware state directly, the higher level code * should check the copy. * * This function will also return true if the state of the queue is * not GENWQE_CARD_USED. This enables us to purge all DDCBs in the * shutdown case. */ static int ddcb_requ_finished(struct genwqe_dev *cd, struct ddcb_requ *req) { return (ddcb_requ_get_state(req) == GENWQE_REQU_FINISHED) || (cd->card_state != GENWQE_CARD_USED); } /** * enqueue_ddcb() - Enqueue a DDCB * @cd: pointer to genwqe device descriptor * @queue: queue this operation should be done on * @ddcb_no: pointer to ddcb number being tapped * * Start execution of DDCB by tapping or append to queue via NEXT * bit. This is done by an atomic 'compare and swap' instruction and * checking SHI and HSI of the previous DDCB. * * This function must only be called with ddcb_lock held. * * Return: 1 if new DDCB is appended to previous * 2 if DDCB queue is tapped via register/simulation */ #define RET_DDCB_APPENDED 1 #define RET_DDCB_TAPPED 2 static int enqueue_ddcb(struct genwqe_dev *cd, struct ddcb_queue *queue, struct ddcb *pddcb, int ddcb_no) { unsigned int try; int prev_no; struct ddcb *prev_ddcb; u32 old, new, icrc_hsi_shi; u64 num; /* * For performance checks a Dispatch Timestamp can be put into * DDCB It is supposed to use the SLU's free running counter, * but this requires PCIe cycles. */ ddcb_mark_unused(pddcb); /* check previous DDCB if already fetched */ prev_no = (ddcb_no == 0) ? queue->ddcb_max - 1 : ddcb_no - 1; prev_ddcb = &queue->ddcb_vaddr[prev_no]; /* * It might have happened that the HSI.FETCHED bit is * set. Retry in this case. Therefore I expect maximum 2 times * trying. */ ddcb_mark_appended(pddcb); for (try = 0; try < 2; try++) { old = prev_ddcb->icrc_hsi_shi_32; /* read SHI/HSI in BE32 */ /* try to append via NEXT bit if prev DDCB is not completed */ if ((old & DDCB_COMPLETED_BE32) != 0x00000000) break; new = (old | DDCB_NEXT_BE32); icrc_hsi_shi = cmpxchg(&prev_ddcb->icrc_hsi_shi_32, old, new); if (icrc_hsi_shi == old) return RET_DDCB_APPENDED; /* appended to queue */ } /* Queue must be re-started by updating QUEUE_OFFSET */ ddcb_mark_tapped(pddcb); num = (u64)ddcb_no << 8; __genwqe_writeq(cd, queue->IO_QUEUE_OFFSET, num); /* start queue */ return RET_DDCB_TAPPED; } /** * copy_ddcb_results() - Copy output state from real DDCB to request * * Copy DDCB ASV to request struct. There is no endian * conversion made, since data structure in ASV is still * unknown here. * * This is needed by: * - genwqe_purge_ddcb() * - genwqe_check_ddcb_queue() */ static void copy_ddcb_results(struct ddcb_requ *req, int ddcb_no) { struct ddcb_queue *queue = req->queue; struct ddcb *pddcb = &queue->ddcb_vaddr[req->num]; memcpy(&req->cmd.asv[0], &pddcb->asv[0], DDCB_ASV_LENGTH); /* copy status flags of the variant part */ req->cmd.vcrc = be16_to_cpu(pddcb->vcrc_16); req->cmd.deque_ts = be64_to_cpu(pddcb->deque_ts_64); req->cmd.cmplt_ts = be64_to_cpu(pddcb->cmplt_ts_64); req->cmd.attn = be16_to_cpu(pddcb->attn_16); req->cmd.progress = be32_to_cpu(pddcb->progress_32); req->cmd.retc = be16_to_cpu(pddcb->retc_16); if (ddcb_requ_collect_debug_data(req)) { int prev_no = (ddcb_no == 0) ? queue->ddcb_max - 1 : ddcb_no - 1; struct ddcb *prev_pddcb = &queue->ddcb_vaddr[prev_no]; memcpy(&req->debug_data.ddcb_finished, pddcb, sizeof(req->debug_data.ddcb_finished)); memcpy(&req->debug_data.ddcb_prev, prev_pddcb, sizeof(req->debug_data.ddcb_prev)); } } /** * genwqe_check_ddcb_queue() - Checks DDCB queue for completed work equests. * @cd: pointer to genwqe device descriptor * * Return: Number of DDCBs which were finished */ static int genwqe_check_ddcb_queue(struct genwqe_dev *cd, struct ddcb_queue *queue) { unsigned long flags; int ddcbs_finished = 0; struct pci_dev *pci_dev = cd->pci_dev; spin_lock_irqsave(&queue->ddcb_lock, flags); /* FIXME avoid soft locking CPU */ while (!queue_empty(queue) && (ddcbs_finished < queue->ddcb_max)) { struct ddcb *pddcb; struct ddcb_requ *req; u16 vcrc, vcrc_16, retc_16; pddcb = &queue->ddcb_vaddr[queue->ddcb_act]; if ((pddcb->icrc_hsi_shi_32 & DDCB_COMPLETED_BE32) == 0x00000000) goto go_home; /* not completed, continue waiting */ /* Note: DDCB could be purged */ req = queue->ddcb_req[queue->ddcb_act]; if (req == NULL) { /* this occurs if DDCB is purged, not an error */ /* Move active DDCB further; Nothing to do anymore. */ goto pick_next_one; } /* * HSI=0x44 (fetched and completed), but RETC is * 0x101, or even worse 0x000. * * In case of seeing the queue in inconsistent state * we read the errcnts and the queue status to provide * a trigger for our PCIe analyzer stop capturing. */ retc_16 = be16_to_cpu(pddcb->retc_16); if ((pddcb->hsi == 0x44) && (retc_16 <= 0x101)) { u64 errcnts, status; u64 ddcb_offs = (u64)pddcb - (u64)queue->ddcb_vaddr; errcnts = __genwqe_readq(cd, queue->IO_QUEUE_ERRCNTS); status = __genwqe_readq(cd, queue->IO_QUEUE_STATUS); dev_err(&pci_dev->dev, "[%s] SEQN=%04x HSI=%02x RETC=%03x " " Q_ERRCNTS=%016llx Q_STATUS=%016llx\n" " DDCB_DMA_ADDR=%016llx\n", __func__, be16_to_cpu(pddcb->seqnum_16), pddcb->hsi, retc_16, errcnts, status, queue->ddcb_daddr + ddcb_offs); } copy_ddcb_results(req, queue->ddcb_act); queue->ddcb_req[queue->ddcb_act] = NULL; /* take from queue */ dev_dbg(&pci_dev->dev, "FINISHED DDCB#%d\n", req->num); genwqe_hexdump(pci_dev, pddcb, sizeof(*pddcb)); ddcb_mark_finished(pddcb); /* calculate CRC_16 to see if VCRC is correct */ vcrc = genwqe_crc16(pddcb->asv, VCRC_LENGTH(req->cmd.asv_length), 0xffff); vcrc_16 = be16_to_cpu(pddcb->vcrc_16); if (vcrc != vcrc_16) { printk_ratelimited(KERN_ERR "%s %s: err: wrong VCRC pre=%02x vcrc_len=%d " "bytes vcrc_data=%04x is not vcrc_card=%04x\n", GENWQE_DEVNAME, dev_name(&pci_dev->dev), pddcb->pre, VCRC_LENGTH(req->cmd.asv_length), vcrc, vcrc_16); } ddcb_requ_set_state(req, GENWQE_REQU_FINISHED); queue->ddcbs_completed++; queue->ddcbs_in_flight--; /* wake up process waiting for this DDCB */ wake_up_interruptible(&queue->ddcb_waitqs[queue->ddcb_act]); pick_next_one: queue->ddcb_act = (queue->ddcb_act + 1) % queue->ddcb_max; ddcbs_finished++; } go_home: spin_unlock_irqrestore(&queue->ddcb_lock, flags); return ddcbs_finished; } /** * __genwqe_wait_ddcb(): Waits until DDCB is completed * @cd: pointer to genwqe device descriptor * @req: pointer to requsted DDCB parameters * * The Service Layer will update the RETC in DDCB when processing is * pending or done. * * Return: > 0 remaining jiffies, DDCB completed * -ETIMEDOUT when timeout * -ERESTARTSYS when ^C * -EINVAL when unknown error condition * * When an error is returned the called needs to ensure that * purge_ddcb() is being called to get the &req removed from the * queue. */ int __genwqe_wait_ddcb(struct genwqe_dev *cd, struct ddcb_requ *req) { int rc; unsigned int ddcb_no; struct ddcb_queue *queue; struct pci_dev *pci_dev = cd->pci_dev; if (req == NULL) return -EINVAL; queue = req->queue; if (queue == NULL) return -EINVAL; ddcb_no = req->num; if (ddcb_no >= queue->ddcb_max) return -EINVAL; rc = wait_event_interruptible_timeout(queue->ddcb_waitqs[ddcb_no], ddcb_requ_finished(cd, req), genwqe_ddcb_software_timeout * HZ); /* * We need to distinguish 3 cases here: * 1. rc == 0 timeout occured * 2. rc == -ERESTARTSYS signal received * 3. rc > 0 remaining jiffies condition is true */ if (rc == 0) { struct ddcb_queue *queue = req->queue; struct ddcb *pddcb; /* * Timeout may be caused by long task switching time. * When timeout happens, check if the request has * meanwhile completed. */ genwqe_check_ddcb_queue(cd, req->queue); if (ddcb_requ_finished(cd, req)) return rc; dev_err(&pci_dev->dev, "[%s] err: DDCB#%d timeout rc=%d state=%d req @ %p\n", __func__, req->num, rc, ddcb_requ_get_state(req), req); dev_err(&pci_dev->dev, "[%s] IO_QUEUE_STATUS=0x%016llx\n", __func__, __genwqe_readq(cd, queue->IO_QUEUE_STATUS)); pddcb = &queue->ddcb_vaddr[req->num]; genwqe_hexdump(pci_dev, pddcb, sizeof(*pddcb)); print_ddcb_info(cd, req->queue); return -ETIMEDOUT; } else if (rc == -ERESTARTSYS) { return rc; /* * EINTR: Stops the application * ERESTARTSYS: Restartable systemcall; called again */ } else if (rc < 0) { dev_err(&pci_dev->dev, "[%s] err: DDCB#%d unknown result (rc=%d) %d!\n", __func__, req->num, rc, ddcb_requ_get_state(req)); return -EINVAL; } /* Severe error occured. Driver is forced to stop operation */ if (cd->card_state != GENWQE_CARD_USED) { dev_err(&pci_dev->dev, "[%s] err: DDCB#%d forced to stop (rc=%d)\n", __func__, req->num, rc); return -EIO; } return rc; } /** * get_next_ddcb() - Get next available DDCB * @cd: pointer to genwqe device descriptor * * DDCB's content is completely cleared but presets for PRE and * SEQNUM. This function must only be called when ddcb_lock is held. * * Return: NULL if no empty DDCB available otherwise ptr to next DDCB. */ static struct ddcb *get_next_ddcb(struct genwqe_dev *cd, struct ddcb_queue *queue, int *num) { u64 *pu64; struct ddcb *pddcb; if (queue_free_ddcbs(queue) == 0) /* queue is full */ return NULL; /* find new ddcb */ pddcb = &queue->ddcb_vaddr[queue->ddcb_next]; /* if it is not completed, we are not allowed to use it */ /* barrier(); */ if ((pddcb->icrc_hsi_shi_32 & DDCB_COMPLETED_BE32) == 0x00000000) return NULL; *num = queue->ddcb_next; /* internal DDCB number */ queue->ddcb_next = (queue->ddcb_next + 1) % queue->ddcb_max; /* clear important DDCB fields */ pu64 = (u64 *)pddcb; pu64[0] = 0ULL; /* offs 0x00 (ICRC,HSI,SHI,...) */ pu64[1] = 0ULL; /* offs 0x01 (ACFUNC,CMD...) */ /* destroy previous results in ASV */ pu64[0x80/8] = 0ULL; /* offs 0x80 (ASV + 0) */ pu64[0x88/8] = 0ULL; /* offs 0x88 (ASV + 0x08) */ pu64[0x90/8] = 0ULL; /* offs 0x90 (ASV + 0x10) */ pu64[0x98/8] = 0ULL; /* offs 0x98 (ASV + 0x18) */ pu64[0xd0/8] = 0ULL; /* offs 0xd0 (RETC,ATTN...) */ pddcb->pre = DDCB_PRESET_PRE; /* 128 */ pddcb->seqnum_16 = cpu_to_be16(queue->ddcb_seq++); return pddcb; } /** * __genwqe_purge_ddcb() - Remove a DDCB from the workqueue * @cd: genwqe device descriptor * @req: DDCB request * * This will fail when the request was already FETCHED. In this case * we need to wait until it is finished. Else the DDCB can be * reused. This function also ensures that the request data structure * is removed from ddcb_req[]. * * Do not forget to call this function when genwqe_wait_ddcb() fails, * such that the request gets really removed from ddcb_req[]. * * Return: 0 success */ int __genwqe_purge_ddcb(struct genwqe_dev *cd, struct ddcb_requ *req) { struct ddcb *pddcb = NULL; unsigned int t; unsigned long flags; struct ddcb_queue *queue = req->queue; struct pci_dev *pci_dev = cd->pci_dev; u32 icrc_hsi_shi = 0x0000; u64 queue_status; u32 old, new; /* unsigned long flags; */ if (genwqe_ddcb_software_timeout <= 0) { dev_err(&pci_dev->dev, "[%s] err: software timeout is not set!\n", __func__); return -EFAULT; } pddcb = &queue->ddcb_vaddr[req->num]; for (t = 0; t < genwqe_ddcb_software_timeout * 10; t++) { spin_lock_irqsave(&queue->ddcb_lock, flags); /* Check if req was meanwhile finished */ if (ddcb_requ_get_state(req) == GENWQE_REQU_FINISHED) goto go_home; /* try to set PURGE bit if FETCHED/COMPLETED are not set */ old = pddcb->icrc_hsi_shi_32; /* read SHI/HSI in BE32 */ if ((old & DDCB_FETCHED_BE32) == 0x00000000) { new = (old | DDCB_PURGE_BE32); icrc_hsi_shi = cmpxchg(&pddcb->icrc_hsi_shi_32, old, new); if (icrc_hsi_shi == old) goto finish_ddcb; } /* normal finish with HSI bit */ barrier(); icrc_hsi_shi = pddcb->icrc_hsi_shi_32; if (icrc_hsi_shi & DDCB_COMPLETED_BE32) goto finish_ddcb; spin_unlock_irqrestore(&queue->ddcb_lock, flags); /* * Here the check_ddcb() function will most likely * discover this DDCB to be finished some point in * time. It will mark the req finished and free it up * in the list. */ copy_ddcb_results(req, req->num); /* for the failing case */ msleep(100); /* sleep for 1/10 second and try again */ continue; finish_ddcb: copy_ddcb_results(req, req->num); ddcb_requ_set_state(req, GENWQE_REQU_FINISHED); queue->ddcbs_in_flight--; queue->ddcb_req[req->num] = NULL; /* delete from array */ ddcb_mark_cleared(pddcb); /* Move active DDCB further; Nothing to do here anymore. */ /* * We need to ensure that there is at least one free * DDCB in the queue. To do that, we must update * ddcb_act only if the COMPLETED bit is set for the * DDCB we are working on else we treat that DDCB even * if we PURGED it as occupied (hardware is supposed * to set the COMPLETED bit yet!). */ icrc_hsi_shi = pddcb->icrc_hsi_shi_32; if ((icrc_hsi_shi & DDCB_COMPLETED_BE32) && (queue->ddcb_act == req->num)) { queue->ddcb_act = ((queue->ddcb_act + 1) % queue->ddcb_max); } go_home: spin_unlock_irqrestore(&queue->ddcb_lock, flags); return 0; } /* * If the card is dead and the queue is forced to stop, we * might see this in the queue status register. */ queue_status = __genwqe_readq(cd, queue->IO_QUEUE_STATUS); dev_dbg(&pci_dev->dev, "UN/FINISHED DDCB#%d\n", req->num); genwqe_hexdump(pci_dev, pddcb, sizeof(*pddcb)); dev_err(&pci_dev->dev, "[%s] err: DDCB#%d not purged and not completed " "after %d seconds QSTAT=%016llx!!\n", __func__, req->num, genwqe_ddcb_software_timeout, queue_status); print_ddcb_info(cd, req->queue); return -EFAULT; } int genwqe_init_debug_data(struct genwqe_dev *cd, struct genwqe_debug_data *d) { int len; struct pci_dev *pci_dev = cd->pci_dev; if (d == NULL) { dev_err(&pci_dev->dev, "[%s] err: invalid memory for debug data!\n", __func__); return -EFAULT; } len = sizeof(d->driver_version); snprintf(d->driver_version, len, "%s", DRV_VERS_STRING); d->slu_unitcfg = cd->slu_unitcfg; d->app_unitcfg = cd->app_unitcfg; return 0; } /** * __genwqe_enqueue_ddcb() - Enqueue a DDCB * @cd: pointer to genwqe device descriptor * @req: pointer to DDCB execution request * * Return: 0 if enqueuing succeeded * -EIO if card is unusable/PCIe problems * -EBUSY if enqueuing failed */ int __genwqe_enqueue_ddcb(struct genwqe_dev *cd, struct ddcb_requ *req) { struct ddcb *pddcb; unsigned long flags; struct ddcb_queue *queue; struct pci_dev *pci_dev = cd->pci_dev; u16 icrc; if (cd->card_state != GENWQE_CARD_USED) { printk_ratelimited(KERN_ERR "%s %s: [%s] Card is unusable/PCIe problem Req#%d\n", GENWQE_DEVNAME, dev_name(&pci_dev->dev), __func__, req->num); return -EIO; } queue = req->queue = &cd->queue; /* FIXME circumvention to improve performance when no irq is * there. */ if (genwqe_polling_enabled) genwqe_check_ddcb_queue(cd, queue); /* * It must be ensured to process all DDCBs in successive * order. Use a lock here in order to prevent nested DDCB * enqueuing. */ spin_lock_irqsave(&queue->ddcb_lock, flags); pddcb = get_next_ddcb(cd, queue, &req->num); /* get ptr and num */ if (pddcb == NULL) { spin_unlock_irqrestore(&queue->ddcb_lock, flags); queue->busy++; return -EBUSY; } if (queue->ddcb_req[req->num] != NULL) { spin_unlock_irqrestore(&queue->ddcb_lock, flags); dev_err(&pci_dev->dev, "[%s] picked DDCB %d with req=%p still in use!!\n", __func__, req->num, req); return -EFAULT; } ddcb_requ_set_state(req, GENWQE_REQU_ENQUEUED); queue->ddcb_req[req->num] = req; pddcb->cmdopts_16 = cpu_to_be16(req->cmd.cmdopts); pddcb->cmd = req->cmd.cmd; pddcb->acfunc = req->cmd.acfunc; /* functional unit */ /* * We know that we can get retc 0x104 with CRC error, do not * stop the queue in those cases for this command. XDIR = 1 * does not work for old SLU versions. * * Last bitstream with the old XDIR behavior had SLU_ID * 0x34199. */ if ((cd->slu_unitcfg & 0xFFFF0ull) > 0x34199ull) pddcb->xdir = 0x1; else pddcb->xdir = 0x0; pddcb->psp = (((req->cmd.asiv_length / 8) << 4) | ((req->cmd.asv_length / 8))); pddcb->disp_ts_64 = cpu_to_be64(req->cmd.disp_ts); /* * If copying the whole DDCB_ASIV_LENGTH is impacting * performance we need to change it to * req->cmd.asiv_length. But simulation benefits from some * non-architectured bits behind the architectured content. * * How much data is copied depends on the availability of the * ATS field, which was introduced late. If the ATS field is * supported ASIV is 8 bytes shorter than it used to be. Since * the ATS field is copied too, the code should do exactly * what it did before, but I wanted to make copying of the ATS * field very explicit. */ if (genwqe_get_slu_id(cd) <= 0x2) { memcpy(&pddcb->__asiv[0], /* destination */ &req->cmd.__asiv[0], /* source */ DDCB_ASIV_LENGTH); /* req->cmd.asiv_length */ } else { pddcb->n.ats_64 = req->cmd.ats; memcpy(&pddcb->n.asiv[0], /* destination */ &req->cmd.asiv[0], /* source */ DDCB_ASIV_LENGTH_ATS); /* req->cmd.asiv_length */ } pddcb->icrc_hsi_shi_32 = cpu_to_be32(0x00000000); /* for crc */ /* * Calculate CRC_16 for corresponding range PSP(7:4). Include * empty 4 bytes prior to the data. */ icrc = genwqe_crc16((const u8 *)pddcb, ICRC_LENGTH(req->cmd.asiv_length), 0xffff); pddcb->icrc_hsi_shi_32 = cpu_to_be32((u32)icrc << 16); /* enable DDCB completion irq */ if (!genwqe_polling_enabled) pddcb->icrc_hsi_shi_32 |= DDCB_INTR_BE32; dev_dbg(&pci_dev->dev, "INPUT DDCB#%d\n", req->num); genwqe_hexdump(pci_dev, pddcb, sizeof(*pddcb)); if (ddcb_requ_collect_debug_data(req)) { /* use the kernel copy of debug data. copying back to user buffer happens later */ genwqe_init_debug_data(cd, &req->debug_data); memcpy(&req->debug_data.ddcb_before, pddcb, sizeof(req->debug_data.ddcb_before)); } enqueue_ddcb(cd, queue, pddcb, req->num); queue->ddcbs_in_flight++; if (queue->ddcbs_in_flight > queue->ddcbs_max_in_flight) queue->ddcbs_max_in_flight = queue->ddcbs_in_flight; ddcb_requ_set_state(req, GENWQE_REQU_TAPPED); spin_unlock_irqrestore(&queue->ddcb_lock, flags); wake_up_interruptible(&cd->queue_waitq); return 0; } /** * __genwqe_execute_raw_ddcb() - Setup and execute DDCB * @cd: pointer to genwqe device descriptor * @req: user provided DDCB request */ int __genwqe_execute_raw_ddcb(struct genwqe_dev *cd, struct genwqe_ddcb_cmd *cmd) { int rc = 0; struct pci_dev *pci_dev = cd->pci_dev; struct ddcb_requ *req = container_of(cmd, struct ddcb_requ, cmd); if (cmd->asiv_length > DDCB_ASIV_LENGTH) { dev_err(&pci_dev->dev, "[%s] err: wrong asiv_length of %d\n", __func__, cmd->asiv_length); return -EINVAL; } if (cmd->asv_length > DDCB_ASV_LENGTH) { dev_err(&pci_dev->dev, "[%s] err: wrong asv_length of %d\n", __func__, cmd->asiv_length); return -EINVAL; } rc = __genwqe_enqueue_ddcb(cd, req); if (rc != 0) return rc; rc = __genwqe_wait_ddcb(cd, req); if (rc < 0) /* error or signal interrupt */ goto err_exit; if (ddcb_requ_collect_debug_data(req)) { if (copy_to_user((void __user *)cmd->ddata_addr, &req->debug_data, sizeof(struct genwqe_debug_data))) return -EFAULT; } /* * Higher values than 0x102 indicate completion with faults, * lower values than 0x102 indicate processing faults. Note * that DDCB might have been purged. E.g. Cntl+C. */ if (cmd->retc != DDCB_RETC_COMPLETE) { /* This might happen e.g. flash read, and needs to be handled by the upper layer code. */ rc = -EBADMSG; /* not processed/error retc */ } return rc; err_exit: __genwqe_purge_ddcb(cd, req); if (ddcb_requ_collect_debug_data(req)) { if (copy_to_user((void __user *)cmd->ddata_addr, &req->debug_data, sizeof(struct genwqe_debug_data))) return -EFAULT; } return rc; } /** * genwqe_next_ddcb_ready() - Figure out if the next DDCB is already finished * * We use this as condition for our wait-queue code. */ static int genwqe_next_ddcb_ready(struct genwqe_dev *cd) { unsigned long flags; struct ddcb *pddcb; struct ddcb_queue *queue = &cd->queue; spin_lock_irqsave(&queue->ddcb_lock, flags); if (queue_empty(queue)) { /* emtpy queue */ spin_unlock_irqrestore(&queue->ddcb_lock, flags); return 0; } pddcb = &queue->ddcb_vaddr[queue->ddcb_act]; if (pddcb->icrc_hsi_shi_32 & DDCB_COMPLETED_BE32) { /* ddcb ready */ spin_unlock_irqrestore(&queue->ddcb_lock, flags); return 1; } spin_unlock_irqrestore(&queue->ddcb_lock, flags); return 0; } /** * genwqe_ddcbs_in_flight() - Check how many DDCBs are in flight * * Keep track on the number of DDCBs which ware currently in the * queue. This is needed for statistics as well as conditon if we want * to wait or better do polling in case of no interrupts available. */ int genwqe_ddcbs_in_flight(struct genwqe_dev *cd) { unsigned long flags; int ddcbs_in_flight = 0; struct ddcb_queue *queue = &cd->queue; spin_lock_irqsave(&queue->ddcb_lock, flags); ddcbs_in_flight += queue->ddcbs_in_flight; spin_unlock_irqrestore(&queue->ddcb_lock, flags); return ddcbs_in_flight; } static int setup_ddcb_queue(struct genwqe_dev *cd, struct ddcb_queue *queue) { int rc, i; struct ddcb *pddcb; u64 val64; unsigned int queue_size; struct pci_dev *pci_dev = cd->pci_dev; if (genwqe_ddcb_max < 2) return -EINVAL; queue_size = roundup(genwqe_ddcb_max * sizeof(struct ddcb), PAGE_SIZE); queue->ddcbs_in_flight = 0; /* statistics */ queue->ddcbs_max_in_flight = 0; queue->ddcbs_completed = 0; queue->busy = 0; queue->ddcb_seq = 0x100; /* start sequence number */ queue->ddcb_max = genwqe_ddcb_max; /* module parameter */ queue->ddcb_vaddr = __genwqe_alloc_consistent(cd, queue_size, &queue->ddcb_daddr); if (queue->ddcb_vaddr == NULL) { dev_err(&pci_dev->dev, "[%s] **err: could not allocate DDCB **\n", __func__); return -ENOMEM; } memset(queue->ddcb_vaddr, 0, queue_size); queue->ddcb_req = kzalloc(sizeof(struct ddcb_requ *) * queue->ddcb_max, GFP_KERNEL); if (!queue->ddcb_req) { rc = -ENOMEM; goto free_ddcbs; } queue->ddcb_waitqs = kzalloc(sizeof(wait_queue_head_t) * queue->ddcb_max, GFP_KERNEL); if (!queue->ddcb_waitqs) { rc = -ENOMEM; goto free_requs; } for (i = 0; i < queue->ddcb_max; i++) { pddcb = &queue->ddcb_vaddr[i]; /* DDCBs */ pddcb->icrc_hsi_shi_32 = DDCB_COMPLETED_BE32; pddcb->retc_16 = cpu_to_be16(0xfff); queue->ddcb_req[i] = NULL; /* requests */ init_waitqueue_head(&queue->ddcb_waitqs[i]); /* waitqueues */ } queue->ddcb_act = 0; queue->ddcb_next = 0; /* queue is empty */ spin_lock_init(&queue->ddcb_lock); init_waitqueue_head(&queue->ddcb_waitq); val64 = ((u64)(queue->ddcb_max - 1) << 8); /* lastptr */ __genwqe_writeq(cd, queue->IO_QUEUE_CONFIG, 0x07); /* iCRC/vCRC */ __genwqe_writeq(cd, queue->IO_QUEUE_SEGMENT, queue->ddcb_daddr); __genwqe_writeq(cd, queue->IO_QUEUE_INITSQN, queue->ddcb_seq); __genwqe_writeq(cd, queue->IO_QUEUE_WRAP, val64); return 0; free_requs: kfree(queue->ddcb_req); queue->ddcb_req = NULL; free_ddcbs: __genwqe_free_consistent(cd, queue_size, queue->ddcb_vaddr, queue->ddcb_daddr); queue->ddcb_vaddr = NULL; queue->ddcb_daddr = 0ull; return -ENODEV; } static int ddcb_queue_initialized(struct ddcb_queue *queue) { return queue->ddcb_vaddr != NULL; } static void free_ddcb_queue(struct genwqe_dev *cd, struct ddcb_queue *queue) { unsigned int queue_size; queue_size = roundup(queue->ddcb_max * sizeof(struct ddcb), PAGE_SIZE); kfree(queue->ddcb_req); queue->ddcb_req = NULL; if (queue->ddcb_vaddr) { __genwqe_free_consistent(cd, queue_size, queue->ddcb_vaddr, queue->ddcb_daddr); queue->ddcb_vaddr = NULL; queue->ddcb_daddr = 0ull; } } static irqreturn_t genwqe_pf_isr(int irq, void *dev_id) { u64 gfir; struct genwqe_dev *cd = (struct genwqe_dev *)dev_id; struct pci_dev *pci_dev = cd->pci_dev; /* * In case of fatal FIR error the queue is stopped, such that * we can safely check it without risking anything. */ cd->irqs_processed++; wake_up_interruptible(&cd->queue_waitq); /* * Checking for errors before kicking the queue might be * safer, but slower for the good-case ... See above. */ gfir = __genwqe_readq(cd, IO_SLC_CFGREG_GFIR); if ((gfir & GFIR_ERR_TRIGGER) != 0x0) { wake_up_interruptible(&cd->health_waitq); /* * By default GFIRs causes recovery actions. This * count is just for debug when recovery is masked. */ printk_ratelimited(KERN_ERR "%s %s: [%s] GFIR=%016llx\n", GENWQE_DEVNAME, dev_name(&pci_dev->dev), __func__, gfir); } return IRQ_HANDLED; } static irqreturn_t genwqe_vf_isr(int irq, void *dev_id) { struct genwqe_dev *cd = (struct genwqe_dev *)dev_id; cd->irqs_processed++; wake_up_interruptible(&cd->queue_waitq); return IRQ_HANDLED; } /** * genwqe_card_thread() - Work thread for the DDCB queue * * The idea is to check if there are DDCBs in processing. If there are * some finished DDCBs, we process them and wakeup the * requestors. Otherwise we give other processes time using * cond_resched(). */ static int genwqe_card_thread(void *data) { int should_stop = 0, rc = 0; struct genwqe_dev *cd = (struct genwqe_dev *)data; while (!kthread_should_stop()) { genwqe_check_ddcb_queue(cd, &cd->queue); if (genwqe_polling_enabled) { rc = wait_event_interruptible_timeout( cd->queue_waitq, genwqe_ddcbs_in_flight(cd) || (should_stop = kthread_should_stop()), 1); } else { rc = wait_event_interruptible_timeout( cd->queue_waitq, genwqe_next_ddcb_ready(cd) || (should_stop = kthread_should_stop()), HZ); } if (should_stop) break; /* * Avoid soft lockups on heavy loads; we do not want * to disable our interrupts. */ cond_resched(); } return 0; } /** * genwqe_setup_service_layer() - Setup DDCB queue * @cd: pointer to genwqe device descriptor * * Allocate DDCBs. Configure Service Layer Controller (SLC). * * Return: 0 success */ int genwqe_setup_service_layer(struct genwqe_dev *cd) { int rc; struct ddcb_queue *queue; struct pci_dev *pci_dev = cd->pci_dev; if (genwqe_is_privileged(cd)) { rc = genwqe_card_reset(cd); if (rc < 0) { dev_err(&pci_dev->dev, "[%s] err: reset failed.\n", __func__); return rc; } genwqe_read_softreset(cd); } queue = &cd->queue; queue->IO_QUEUE_CONFIG = IO_SLC_QUEUE_CONFIG; queue->IO_QUEUE_STATUS = IO_SLC_QUEUE_STATUS; queue->IO_QUEUE_SEGMENT = IO_SLC_QUEUE_SEGMENT; queue->IO_QUEUE_INITSQN = IO_SLC_QUEUE_INITSQN; queue->IO_QUEUE_OFFSET = IO_SLC_QUEUE_OFFSET; queue->IO_QUEUE_WRAP = IO_SLC_QUEUE_WRAP; queue->IO_QUEUE_WTIME = IO_SLC_QUEUE_WTIME; queue->IO_QUEUE_ERRCNTS = IO_SLC_QUEUE_ERRCNTS; queue->IO_QUEUE_LRW = IO_SLC_QUEUE_LRW; rc = setup_ddcb_queue(cd, queue); if (rc != 0) { rc = -ENODEV; goto err_out; } init_waitqueue_head(&cd->queue_waitq); cd->card_thread = kthread_run(genwqe_card_thread, cd, GENWQE_DEVNAME "%d_thread", cd->card_idx); if (IS_ERR(cd->card_thread)) { rc = PTR_ERR(cd->card_thread); cd->card_thread = NULL; goto stop_free_queue; } rc = genwqe_set_interrupt_capability(cd, GENWQE_MSI_IRQS); if (rc > 0) rc = genwqe_set_interrupt_capability(cd, rc); if (rc != 0) { rc = -ENODEV; goto stop_kthread; } /* * We must have all wait-queues initialized when we enable the * interrupts. Otherwise we might crash if we get an early * irq. */ init_waitqueue_head(&cd->health_waitq); if (genwqe_is_privileged(cd)) { rc = request_irq(pci_dev->irq, genwqe_pf_isr, IRQF_SHARED, GENWQE_DEVNAME, cd); } else { rc = request_irq(pci_dev->irq, genwqe_vf_isr, IRQF_SHARED, GENWQE_DEVNAME, cd); } if (rc < 0) { dev_err(&pci_dev->dev, "irq %d not free.\n", pci_dev->irq); goto stop_irq_cap; } cd->card_state = GENWQE_CARD_USED; return 0; stop_irq_cap: genwqe_reset_interrupt_capability(cd); stop_kthread: kthread_stop(cd->card_thread); cd->card_thread = NULL; stop_free_queue: free_ddcb_queue(cd, queue); err_out: return rc; } /** * queue_wake_up_all() - Handles fatal error case * * The PCI device got unusable and we have to stop all pending * requests as fast as we can. The code after this must purge the * DDCBs in question and ensure that all mappings are freed. */ static int queue_wake_up_all(struct genwqe_dev *cd) { unsigned int i; unsigned long flags; struct ddcb_queue *queue = &cd->queue; spin_lock_irqsave(&queue->ddcb_lock, flags); for (i = 0; i < queue->ddcb_max; i++) wake_up_interruptible(&queue->ddcb_waitqs[queue->ddcb_act]); spin_unlock_irqrestore(&queue->ddcb_lock, flags); return 0; } /** * genwqe_finish_queue() - Remove any genwqe devices and user-interfaces * * Relies on the pre-condition that there are no users of the card * device anymore e.g. with open file-descriptors. * * This function must be robust enough to be called twice. */ int genwqe_finish_queue(struct genwqe_dev *cd) { int i, rc, in_flight; int waitmax = genwqe_ddcb_software_timeout; struct pci_dev *pci_dev = cd->pci_dev; struct ddcb_queue *queue = &cd->queue; if (!ddcb_queue_initialized(queue)) return 0; /* Do not wipe out the error state. */ if (cd->card_state == GENWQE_CARD_USED) cd->card_state = GENWQE_CARD_UNUSED; /* Wake up all requests in the DDCB queue such that they should be removed nicely. */ queue_wake_up_all(cd); /* We must wait to get rid of the DDCBs in flight */ for (i = 0; i < waitmax; i++) { in_flight = genwqe_ddcbs_in_flight(cd); if (in_flight == 0) break; dev_dbg(&pci_dev->dev, " DEBUG [%d/%d] waiting for queue to get empty: " "%d requests!\n", i, waitmax, in_flight); /* * Severe severe error situation: The card itself has * 16 DDCB queues, each queue has e.g. 32 entries, * each DDBC has a hardware timeout of currently 250 * msec but the PFs have a hardware timeout of 8 sec * ... so I take something large. */ msleep(1000); } if (i == waitmax) { dev_err(&pci_dev->dev, " [%s] err: queue is not empty!!\n", __func__); rc = -EIO; } return rc; } /** * genwqe_release_service_layer() - Shutdown DDCB queue * @cd: genwqe device descriptor * * This function must be robust enough to be called twice. */ int genwqe_release_service_layer(struct genwqe_dev *cd) { struct pci_dev *pci_dev = cd->pci_dev; if (!ddcb_queue_initialized(&cd->queue)) return 1; free_irq(pci_dev->irq, cd); genwqe_reset_interrupt_capability(cd); if (cd->card_thread != NULL) { kthread_stop(cd->card_thread); cd->card_thread = NULL; } free_ddcb_queue(cd, &cd->queue); return 0; }