/* * Driver for Nuvoton Technology Corporation w83667hg/w83677hg-i CIR * * Copyright (C) 2010 Jarod Wilson * Copyright (C) 2009 Nuvoton PS Team * * Special thanks to Nuvoton for providing hardware, spec sheets and * sample code upon which portions of this driver are based. Indirect * thanks also to Maxim Levitsky, whose ene_ir driver this driver is * modeled after. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of the * License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, but * WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 * USA */ #include #include /* platform driver name to register */ #define NVT_DRIVER_NAME "nuvoton-cir" /* debugging module parameter */ static int debug; #define nvt_dbg(text, ...) \ if (debug) \ printk(KERN_DEBUG \ KBUILD_MODNAME ": " text "\n" , ## __VA_ARGS__) #define nvt_dbg_verbose(text, ...) \ if (debug > 1) \ printk(KERN_DEBUG \ KBUILD_MODNAME ": " text "\n" , ## __VA_ARGS__) #define nvt_dbg_wake(text, ...) \ if (debug > 2) \ printk(KERN_DEBUG \ KBUILD_MODNAME ": " text "\n" , ## __VA_ARGS__) /* * Original lirc driver said min value of 76, and recommended value of 256 * for the buffer length, but then used 2048. Never mind that the size of the * RX FIFO is 32 bytes... So I'm using 32 for RX and 256 for TX atm, but I'm * not sure if maybe that TX value is off by a factor of 8 (bits vs. bytes), * and I don't have TX-capable hardware to test/debug on... */ #define TX_BUF_LEN 256 #define RX_BUF_LEN 32 #define SIO_ID_MASK 0xfff0 enum nvt_chip_ver { NVT_UNKNOWN = 0, NVT_W83667HG = 0xa510, NVT_6775F = 0xb470, NVT_6776F = 0xc330, NVT_6779D = 0xc560, NVT_INVALID = 0xffff, }; struct nvt_chip { const char *name; enum nvt_chip_ver chip_ver; }; struct nvt_dev { struct pnp_dev *pdev; struct rc_dev *rdev; spinlock_t nvt_lock; /* for rx */ u8 buf[RX_BUF_LEN]; unsigned int pkts; struct { spinlock_t lock; u8 buf[TX_BUF_LEN]; unsigned int buf_count; unsigned int cur_buf_num; wait_queue_head_t queue; u8 tx_state; } tx; /* EFER Config register index/data pair */ u32 cr_efir; u32 cr_efdr; /* hardware I/O settings */ unsigned long cir_addr; unsigned long cir_wake_addr; int cir_irq; enum nvt_chip_ver chip_ver; /* hardware id */ u8 chip_major; u8 chip_minor; /* hardware features */ bool hw_learning_capable; bool hw_tx_capable; /* rx settings */ bool learning_enabled; /* carrier period = 1 / frequency */ u32 carrier; }; /* send states */ #define ST_TX_NONE 0x0 #define ST_TX_REQUEST 0x2 #define ST_TX_REPLY 0x4 /* buffer packet constants */ #define BUF_PULSE_BIT 0x80 #define BUF_LEN_MASK 0x7f #define BUF_REPEAT_BYTE 0x70 #define BUF_REPEAT_MASK 0xf0 /* CIR settings */ /* total length of CIR and CIR WAKE */ #define CIR_IOREG_LENGTH 0x0f /* RX limit length, 8 high bits for SLCH, 8 low bits for SLCL */ #define CIR_RX_LIMIT_COUNT (IR_DEFAULT_TIMEOUT / US_TO_NS(SAMPLE_PERIOD)) /* CIR Regs */ #define CIR_IRCON 0x00 #define CIR_IRSTS 0x01 #define CIR_IREN 0x02 #define CIR_RXFCONT 0x03 #define CIR_CP 0x04 #define CIR_CC 0x05 #define CIR_SLCH 0x06 #define CIR_SLCL 0x07 #define CIR_FIFOCON 0x08 #define CIR_IRFIFOSTS 0x09 #define CIR_SRXFIFO 0x0a #define CIR_TXFCONT 0x0b #define CIR_STXFIFO 0x0c #define CIR_FCCH 0x0d #define CIR_FCCL 0x0e #define CIR_IRFSM 0x0f /* CIR IRCON settings */ #define CIR_IRCON_RECV 0x80 #define CIR_IRCON_WIREN 0x40 #define CIR_IRCON_TXEN 0x20 #define CIR_IRCON_RXEN 0x10 #define CIR_IRCON_WRXINV 0x08 #define CIR_IRCON_RXINV 0x04 #define CIR_IRCON_SAMPLE_PERIOD_SEL_1 0x00 #define CIR_IRCON_SAMPLE_PERIOD_SEL_25 0x01 #define CIR_IRCON_SAMPLE_PERIOD_SEL_50 0x02 #define CIR_IRCON_SAMPLE_PERIOD_SEL_100 0x03 /* FIXME: make this a runtime option */ /* select sample period as 50us */ #define CIR_IRCON_SAMPLE_PERIOD_SEL CIR_IRCON_SAMPLE_PERIOD_SEL_50 /* CIR IRSTS settings */ #define CIR_IRSTS_RDR 0x80 #define CIR_IRSTS_RTR 0x40 #define CIR_IRSTS_PE 0x20 #define CIR_IRSTS_RFO 0x10 #define CIR_IRSTS_TE 0x08 #define CIR_IRSTS_TTR 0x04 #define CIR_IRSTS_TFU 0x02 #define CIR_IRSTS_GH 0x01 /* CIR IREN settings */ #define CIR_IREN_RDR 0x80 #define CIR_IREN_RTR 0x40 #define CIR_IREN_PE 0x20 #define CIR_IREN_RFO 0x10 #define CIR_IREN_TE 0x08 #define CIR_IREN_TTR 0x04 #define CIR_IREN_TFU 0x02 #define CIR_IREN_GH 0x01 /* CIR FIFOCON settings */ #define CIR_FIFOCON_TXFIFOCLR 0x80 #define CIR_FIFOCON_TX_TRIGGER_LEV_31 0x00 #define CIR_FIFOCON_TX_TRIGGER_LEV_24 0x10 #define CIR_FIFOCON_TX_TRIGGER_LEV_16 0x20 #define CIR_FIFOCON_TX_TRIGGER_LEV_8 0x30 /* FIXME: make this a runtime option */ /* select TX trigger level as 16 */ #define CIR_FIFOCON_TX_TRIGGER_LEV CIR_FIFOCON_TX_TRIGGER_LEV_16 #define CIR_FIFOCON_RXFIFOCLR 0x08 #define CIR_FIFOCON_RX_TRIGGER_LEV_1 0x00 #define CIR_FIFOCON_RX_TRIGGER_LEV_8 0x01 #define CIR_FIFOCON_RX_TRIGGER_LEV_16 0x02 #define CIR_FIFOCON_RX_TRIGGER_LEV_24 0x03 /* FIXME: make this a runtime option */ /* select RX trigger level as 24 */ #define CIR_FIFOCON_RX_TRIGGER_LEV CIR_FIFOCON_RX_TRIGGER_LEV_24 /* CIR IRFIFOSTS settings */ #define CIR_IRFIFOSTS_IR_PENDING 0x80 #define CIR_IRFIFOSTS_RX_GS 0x40 #define CIR_IRFIFOSTS_RX_FTA 0x20 #define CIR_IRFIFOSTS_RX_EMPTY 0x10 #define CIR_IRFIFOSTS_RX_FULL 0x08 #define CIR_IRFIFOSTS_TX_FTA 0x04 #define CIR_IRFIFOSTS_TX_EMPTY 0x02 #define CIR_IRFIFOSTS_TX_FULL 0x01 /* CIR WAKE UP Regs */ #define CIR_WAKE_IRCON 0x00 #define CIR_WAKE_IRSTS 0x01 #define CIR_WAKE_IREN 0x02 #define CIR_WAKE_FIFO_CMP_DEEP 0x03 #define CIR_WAKE_FIFO_CMP_TOL 0x04 #define CIR_WAKE_FIFO_COUNT 0x05 #define CIR_WAKE_SLCH 0x06 #define CIR_WAKE_SLCL 0x07 #define CIR_WAKE_FIFOCON 0x08 #define CIR_WAKE_SRXFSTS 0x09 #define CIR_WAKE_SAMPLE_RX_FIFO 0x0a #define CIR_WAKE_WR_FIFO_DATA 0x0b #define CIR_WAKE_RD_FIFO_ONLY 0x0c #define CIR_WAKE_RD_FIFO_ONLY_IDX 0x0d #define CIR_WAKE_FIFO_IGNORE 0x0e #define CIR_WAKE_IRFSM 0x0f /* CIR WAKE UP IRCON settings */ #define CIR_WAKE_IRCON_DEC_RST 0x80 #define CIR_WAKE_IRCON_MODE1 0x40 #define CIR_WAKE_IRCON_MODE0 0x20 #define CIR_WAKE_IRCON_RXEN 0x10 #define CIR_WAKE_IRCON_R 0x08 #define CIR_WAKE_IRCON_RXINV 0x04 /* FIXME/jarod: make this a runtime option */ /* select a same sample period like cir register */ #define CIR_WAKE_IRCON_SAMPLE_PERIOD_SEL CIR_IRCON_SAMPLE_PERIOD_SEL_50 /* CIR WAKE IRSTS Bits */ #define CIR_WAKE_IRSTS_RDR 0x80 #define CIR_WAKE_IRSTS_RTR 0x40 #define CIR_WAKE_IRSTS_PE 0x20 #define CIR_WAKE_IRSTS_RFO 0x10 #define CIR_WAKE_IRSTS_GH 0x08 #define CIR_WAKE_IRSTS_IR_PENDING 0x01 /* CIR WAKE UP IREN Bits */ #define CIR_WAKE_IREN_RDR 0x80 #define CIR_WAKE_IREN_RTR 0x40 #define CIR_WAKE_IREN_PE 0x20 #define CIR_WAKE_IREN_RFO 0x10 #define CIR_WAKE_IREN_GH 0x08 /* CIR WAKE FIFOCON settings */ #define CIR_WAKE_FIFOCON_RXFIFOCLR 0x08 #define CIR_WAKE_FIFOCON_RX_TRIGGER_LEV_67 0x00 #define CIR_WAKE_FIFOCON_RX_TRIGGER_LEV_66 0x01 #define CIR_WAKE_FIFOCON_RX_TRIGGER_LEV_65 0x02 #define CIR_WAKE_FIFOCON_RX_TRIGGER_LEV_64 0x03 /* FIXME: make this a runtime option */ /* select WAKE UP RX trigger level as 67 */ #define CIR_WAKE_FIFOCON_RX_TRIGGER_LEV CIR_WAKE_FIFOCON_RX_TRIGGER_LEV_67 /* CIR WAKE SRXFSTS settings */ #define CIR_WAKE_IRFIFOSTS_RX_GS 0x80 #define CIR_WAKE_IRFIFOSTS_RX_FTA 0x40 #define CIR_WAKE_IRFIFOSTS_RX_EMPTY 0x20 #define CIR_WAKE_IRFIFOSTS_RX_FULL 0x10 /* * The CIR Wake FIFO buffer is 67 bytes long, but the stock remote wakes * the system comparing only 65 bytes (fails with this set to 67) */ #define CIR_WAKE_FIFO_CMP_BYTES 65 /* CIR Wake byte comparison tolerance */ #define CIR_WAKE_CMP_TOLERANCE 5 /* * Extended Function Enable Registers: * Extended Function Index Register * Extended Function Data Register */ #define CR_EFIR 0x2e #define CR_EFDR 0x2f /* Possible alternate EFER values, depends on how the chip is wired */ #define CR_EFIR2 0x4e #define CR_EFDR2 0x4f /* Extended Function Mode enable/disable magic values */ #define EFER_EFM_ENABLE 0x87 #define EFER_EFM_DISABLE 0xaa /* Config regs we need to care about */ #define CR_SOFTWARE_RESET 0x02 #define CR_LOGICAL_DEV_SEL 0x07 #define CR_CHIP_ID_HI 0x20 #define CR_CHIP_ID_LO 0x21 #define CR_DEV_POWER_DOWN 0x22 /* bit 2 is CIR power, default power on */ #define CR_OUTPUT_PIN_SEL 0x27 #define CR_MULTIFUNC_PIN_SEL 0x2c #define CR_LOGICAL_DEV_EN 0x30 /* valid for all logical devices */ /* next three regs valid for both the CIR and CIR_WAKE logical devices */ #define CR_CIR_BASE_ADDR_HI 0x60 #define CR_CIR_BASE_ADDR_LO 0x61 #define CR_CIR_IRQ_RSRC 0x70 /* next three regs valid only for ACPI logical dev */ #define CR_ACPI_CIR_WAKE 0xe0 #define CR_ACPI_IRQ_EVENTS 0xf6 #define CR_ACPI_IRQ_EVENTS2 0xf7 /* Logical devices that we need to care about */ #define LOGICAL_DEV_LPT 0x01 #define LOGICAL_DEV_CIR 0x06 #define LOGICAL_DEV_ACPI 0x0a #define LOGICAL_DEV_CIR_WAKE 0x0e #define LOGICAL_DEV_DISABLE 0x00 #define LOGICAL_DEV_ENABLE 0x01 #define CIR_WAKE_ENABLE_BIT 0x08 #define PME_INTR_CIR_PASS_BIT 0x08 /* w83677hg CIR pin config */ #define OUTPUT_PIN_SEL_MASK 0xbc #define OUTPUT_ENABLE_CIR 0x01 /* Pin95=CIRRX, Pin96=CIRTX1 */ #define OUTPUT_ENABLE_CIRWB 0x40 /* enable wide-band sensor */ /* w83667hg CIR pin config */ #define MULTIFUNC_PIN_SEL_MASK 0x1f #define MULTIFUNC_ENABLE_CIR 0x80 /* Pin75=CIRRX, Pin76=CIRTX1 */ #define MULTIFUNC_ENABLE_CIRWB 0x20 /* enable wide-band sensor */ /* MCE CIR signal length, related on sample period */ /* MCE CIR controller signal length: about 43ms * 43ms / 50us (sample period) * 0.85 (inaccuracy) */ #define CONTROLLER_BUF_LEN_MIN 830 /* MCE CIR keyboard signal length: about 26ms * 26ms / 50us (sample period) * 0.85 (inaccuracy) */ #define KEYBOARD_BUF_LEN_MAX 650 #define KEYBOARD_BUF_LEN_MIN 610 /* MCE CIR mouse signal length: about 24ms * 24ms / 50us (sample period) * 0.85 (inaccuracy) */ #define MOUSE_BUF_LEN_MIN 565 #define CIR_SAMPLE_PERIOD 50 #define CIR_SAMPLE_LOW_INACCURACY 0.85 /* MAX silence time that driver will sent to lirc */ #define MAX_SILENCE_TIME 60000 #if CIR_IRCON_SAMPLE_PERIOD_SEL == CIR_IRCON_SAMPLE_PERIOD_SEL_100 #define SAMPLE_PERIOD 100 #elif CIR_IRCON_SAMPLE_PERIOD_SEL == CIR_IRCON_SAMPLE_PERIOD_SEL_50 #define SAMPLE_PERIOD 50 #elif CIR_IRCON_SAMPLE_PERIOD_SEL == CIR_IRCON_SAMPLE_PERIOD_SEL_25 #define SAMPLE_PERIOD 25 #else #define SAMPLE_PERIOD 1 #endif /* as VISTA MCE definition, valid carrier value */ #define MAX_CARRIER 60000 #define MIN_CARRIER 30000 /* max wakeup sequence length */ #define WAKEUP_MAX_SIZE 65