/* * Header file for the Atmel AHB DMA Controller driver * * Copyright (C) 2008 Atmel Corporation * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. */ #ifndef AT_HDMAC_REGS_H #define AT_HDMAC_REGS_H #include <linux/platform_data/dma-atmel.h> #define AT_DMA_MAX_NR_CHANNELS 8 #define AT_DMA_GCFG 0x00 /* Global Configuration Register */ #define AT_DMA_IF_BIGEND(i) (0x1 << (i)) /* AHB-Lite Interface i in Big-endian mode */ #define AT_DMA_ARB_CFG (0x1 << 4) /* Arbiter mode. */ #define AT_DMA_ARB_CFG_FIXED (0x0 << 4) #define AT_DMA_ARB_CFG_ROUND_ROBIN (0x1 << 4) #define AT_DMA_EN 0x04 /* Controller Enable Register */ #define AT_DMA_ENABLE (0x1 << 0) #define AT_DMA_SREQ 0x08 /* Software Single Request Register */ #define AT_DMA_SSREQ(x) (0x1 << ((x) << 1)) /* Request a source single transfer on channel x */ #define AT_DMA_DSREQ(x) (0x1 << (1 + ((x) << 1))) /* Request a destination single transfer on channel x */ #define AT_DMA_CREQ 0x0C /* Software Chunk Transfer Request Register */ #define AT_DMA_SCREQ(x) (0x1 << ((x) << 1)) /* Request a source chunk transfer on channel x */ #define AT_DMA_DCREQ(x) (0x1 << (1 + ((x) << 1))) /* Request a destination chunk transfer on channel x */ #define AT_DMA_LAST 0x10 /* Software Last Transfer Flag Register */ #define AT_DMA_SLAST(x) (0x1 << ((x) << 1)) /* This src rq is last tx of buffer on channel x */ #define AT_DMA_DLAST(x) (0x1 << (1 + ((x) << 1))) /* This dst rq is last tx of buffer on channel x */ #define AT_DMA_SYNC 0x14 /* Request Synchronization Register */ #define AT_DMA_SYR(h) (0x1 << (h)) /* Synchronize handshake line h */ /* Error, Chained Buffer transfer completed and Buffer transfer completed Interrupt registers */ #define AT_DMA_EBCIER 0x18 /* Enable register */ #define AT_DMA_EBCIDR 0x1C /* Disable register */ #define AT_DMA_EBCIMR 0x20 /* Mask Register */ #define AT_DMA_EBCISR 0x24 /* Status Register */ #define AT_DMA_CBTC_OFFSET 8 #define AT_DMA_ERR_OFFSET 16 #define AT_DMA_BTC(x) (0x1 << (x)) #define AT_DMA_CBTC(x) (0x1 << (AT_DMA_CBTC_OFFSET + (x))) #define AT_DMA_ERR(x) (0x1 << (AT_DMA_ERR_OFFSET + (x))) #define AT_DMA_CHER 0x28 /* Channel Handler Enable Register */ #define AT_DMA_ENA(x) (0x1 << (x)) #define AT_DMA_SUSP(x) (0x1 << ( 8 + (x))) #define AT_DMA_KEEP(x) (0x1 << (24 + (x))) #define AT_DMA_CHDR 0x2C /* Channel Handler Disable Register */ #define AT_DMA_DIS(x) (0x1 << (x)) #define AT_DMA_RES(x) (0x1 << ( 8 + (x))) #define AT_DMA_CHSR 0x30 /* Channel Handler Status Register */ #define AT_DMA_EMPT(x) (0x1 << (16 + (x))) #define AT_DMA_STAL(x) (0x1 << (24 + (x))) #define AT_DMA_CH_REGS_BASE 0x3C /* Channel registers base address */ #define ch_regs(x) (AT_DMA_CH_REGS_BASE + (x) * 0x28) /* Channel x base addr */ /* Hardware register offset for each channel */ #define ATC_SADDR_OFFSET 0x00 /* Source Address Register */ #define ATC_DADDR_OFFSET 0x04 /* Destination Address Register */ #define ATC_DSCR_OFFSET 0x08 /* Descriptor Address Register */ #define ATC_CTRLA_OFFSET 0x0C /* Control A Register */ #define ATC_CTRLB_OFFSET 0x10 /* Control B Register */ #define ATC_CFG_OFFSET 0x14 /* Configuration Register */ #define ATC_SPIP_OFFSET 0x18 /* Src PIP Configuration Register */ #define ATC_DPIP_OFFSET 0x1C /* Dst PIP Configuration Register */ /* Bitfield definitions */ /* Bitfields in DSCR */ #define ATC_DSCR_IF(i) (0x3 & (i)) /* Dsc feched via AHB-Lite Interface i */ /* Bitfields in CTRLA */ #define ATC_BTSIZE_MAX 0xFFFFUL /* Maximum Buffer Transfer Size */ #define ATC_BTSIZE(x) (ATC_BTSIZE_MAX & (x)) /* Buffer Transfer Size */ #define ATC_SCSIZE_MASK (0x7 << 16) /* Source Chunk Transfer Size */ #define ATC_SCSIZE(x) (ATC_SCSIZE_MASK & ((x) << 16)) #define ATC_SCSIZE_1 (0x0 << 16) #define ATC_SCSIZE_4 (0x1 << 16) #define ATC_SCSIZE_8 (0x2 << 16) #define ATC_SCSIZE_16 (0x3 << 16) #define ATC_SCSIZE_32 (0x4 << 16) #define ATC_SCSIZE_64 (0x5 << 16) #define ATC_SCSIZE_128 (0x6 << 16) #define ATC_SCSIZE_256 (0x7 << 16) #define ATC_DCSIZE_MASK (0x7 << 20) /* Destination Chunk Transfer Size */ #define ATC_DCSIZE(x) (ATC_DCSIZE_MASK & ((x) << 20)) #define ATC_DCSIZE_1 (0x0 << 20) #define ATC_DCSIZE_4 (0x1 << 20) #define ATC_DCSIZE_8 (0x2 << 20) #define ATC_DCSIZE_16 (0x3 << 20) #define ATC_DCSIZE_32 (0x4 << 20) #define ATC_DCSIZE_64 (0x5 << 20) #define ATC_DCSIZE_128 (0x6 << 20) #define ATC_DCSIZE_256 (0x7 << 20) #define ATC_SRC_WIDTH_MASK (0x3 << 24) /* Source Single Transfer Size */ #define ATC_SRC_WIDTH(x) ((x) << 24) #define ATC_SRC_WIDTH_BYTE (0x0 << 24) #define ATC_SRC_WIDTH_HALFWORD (0x1 << 24) #define ATC_SRC_WIDTH_WORD (0x2 << 24) #define ATC_REG_TO_SRC_WIDTH(r) (((r) >> 24) & 0x3) #define ATC_DST_WIDTH_MASK (0x3 << 28) /* Destination Single Transfer Size */ #define ATC_DST_WIDTH(x) ((x) << 28) #define ATC_DST_WIDTH_BYTE (0x0 << 28) #define ATC_DST_WIDTH_HALFWORD (0x1 << 28) #define ATC_DST_WIDTH_WORD (0x2 << 28) #define ATC_DONE (0x1 << 31) /* Tx Done (only written back in descriptor) */ /* Bitfields in CTRLB */ #define ATC_SIF(i) (0x3 & (i)) /* Src tx done via AHB-Lite Interface i */ #define ATC_DIF(i) ((0x3 & (i)) << 4) /* Dst tx done via AHB-Lite Interface i */ /* Specify AHB interfaces */ #define AT_DMA_MEM_IF 0 /* interface 0 as memory interface */ #define AT_DMA_PER_IF 1 /* interface 1 as peripheral interface */ #define ATC_SRC_PIP (0x1 << 8) /* Source Picture-in-Picture enabled */ #define ATC_DST_PIP (0x1 << 12) /* Destination Picture-in-Picture enabled */ #define ATC_SRC_DSCR_DIS (0x1 << 16) /* Src Descriptor fetch disable */ #define ATC_DST_DSCR_DIS (0x1 << 20) /* Dst Descriptor fetch disable */ #define ATC_FC_MASK (0x7 << 21) /* Choose Flow Controller */ #define ATC_FC_MEM2MEM (0x0 << 21) /* Mem-to-Mem (DMA) */ #define ATC_FC_MEM2PER (0x1 << 21) /* Mem-to-Periph (DMA) */ #define ATC_FC_PER2MEM (0x2 << 21) /* Periph-to-Mem (DMA) */ #define ATC_FC_PER2PER (0x3 << 21) /* Periph-to-Periph (DMA) */ #define ATC_FC_PER2MEM_PER (0x4 << 21) /* Periph-to-Mem (Peripheral) */ #define ATC_FC_MEM2PER_PER (0x5 << 21) /* Mem-to-Periph (Peripheral) */ #define ATC_FC_PER2PER_SRCPER (0x6 << 21) /* Periph-to-Periph (Src Peripheral) */ #define ATC_FC_PER2PER_DSTPER (0x7 << 21) /* Periph-to-Periph (Dst Peripheral) */ #define ATC_SRC_ADDR_MODE_MASK (0x3 << 24) #define ATC_SRC_ADDR_MODE_INCR (0x0 << 24) /* Incrementing Mode */ #define ATC_SRC_ADDR_MODE_DECR (0x1 << 24) /* Decrementing Mode */ #define ATC_SRC_ADDR_MODE_FIXED (0x2 << 24) /* Fixed Mode */ #define ATC_DST_ADDR_MODE_MASK (0x3 << 28) #define ATC_DST_ADDR_MODE_INCR (0x0 << 28) /* Incrementing Mode */ #define ATC_DST_ADDR_MODE_DECR (0x1 << 28) /* Decrementing Mode */ #define ATC_DST_ADDR_MODE_FIXED (0x2 << 28) /* Fixed Mode */ #define ATC_IEN (0x1 << 30) /* BTC interrupt enable (active low) */ #define ATC_AUTO (0x1 << 31) /* Auto multiple buffer tx enable */ /* Bitfields in CFG */ /* are in at_hdmac.h */ /* Bitfields in SPIP */ #define ATC_SPIP_HOLE(x) (0xFFFFU & (x)) #define ATC_SPIP_BOUNDARY(x) ((0x3FF & (x)) << 16) /* Bitfields in DPIP */ #define ATC_DPIP_HOLE(x) (0xFFFFU & (x)) #define ATC_DPIP_BOUNDARY(x) ((0x3FF & (x)) << 16) /*-- descriptors -----------------------------------------------------*/ /* LLI == Linked List Item; aka DMA buffer descriptor */ struct at_lli { /* values that are not changed by hardware */ dma_addr_t saddr; dma_addr_t daddr; /* value that may get written back: */ u32 ctrla; /* more values that are not changed by hardware */ u32 ctrlb; dma_addr_t dscr; /* chain to next lli */ }; /** * struct at_desc - software descriptor * @at_lli: hardware lli structure * @txd: support for the async_tx api * @desc_node: node on the channed descriptors list * @len: descriptor byte count * @total_len: total transaction byte count */ struct at_desc { /* FIRST values the hardware uses */ struct at_lli lli; /* THEN values for driver housekeeping */ struct list_head tx_list; struct dma_async_tx_descriptor txd; struct list_head desc_node; size_t len; size_t total_len; /* Interleaved data */ size_t boundary; size_t dst_hole; size_t src_hole; /* Memset temporary buffer */ bool memset_buffer; dma_addr_t memset_paddr; int *memset_vaddr; }; static inline struct at_desc * txd_to_at_desc(struct dma_async_tx_descriptor *txd) { return container_of(txd, struct at_desc, txd); } /*-- Channels --------------------------------------------------------*/ /** * atc_status - information bits stored in channel status flag * * Manipulated with atomic operations. */ enum atc_status { ATC_IS_ERROR = 0, ATC_IS_PAUSED = 1, ATC_IS_CYCLIC = 24, }; /** * struct at_dma_chan - internal representation of an Atmel HDMAC channel * @chan_common: common dmaengine channel object members * @device: parent device * @ch_regs: memory mapped register base * @mask: channel index in a mask * @per_if: peripheral interface * @mem_if: memory interface * @status: transmit status information from irq/prep* functions * to tasklet (use atomic operations) * @tasklet: bottom half to finish transaction work * @save_cfg: configuration register that is saved on suspend/resume cycle * @save_dscr: for cyclic operations, preserve next descriptor address in * the cyclic list on suspend/resume cycle * @dma_sconfig: configuration for slave transfers, passed via * .device_config * @lock: serializes enqueue/dequeue operations to descriptors lists * @active_list: list of descriptors dmaengine is being running on * @queue: list of descriptors ready to be submitted to engine * @free_list: list of descriptors usable by the channel * @descs_allocated: records the actual size of the descriptor pool */ struct at_dma_chan { struct dma_chan chan_common; struct at_dma *device; void __iomem *ch_regs; u8 mask; u8 per_if; u8 mem_if; unsigned long status; struct tasklet_struct tasklet; u32 save_cfg; u32 save_dscr; struct dma_slave_config dma_sconfig; spinlock_t lock; /* these other elements are all protected by lock */ struct list_head active_list; struct list_head queue; struct list_head free_list; unsigned int descs_allocated; }; #define channel_readl(atchan, name) \ __raw_readl((atchan)->ch_regs + ATC_##name##_OFFSET) #define channel_writel(atchan, name, val) \ __raw_writel((val), (atchan)->ch_regs + ATC_##name##_OFFSET) static inline struct at_dma_chan *to_at_dma_chan(struct dma_chan *dchan) { return container_of(dchan, struct at_dma_chan, chan_common); } /* * Fix sconfig's burst size according to at_hdmac. We need to convert them as: * 1 -> 0, 4 -> 1, 8 -> 2, 16 -> 3, 32 -> 4, 64 -> 5, 128 -> 6, 256 -> 7. * * This can be done by finding most significant bit set. */ static inline void convert_burst(u32 *maxburst) { if (*maxburst > 1) *maxburst = fls(*maxburst) - 2; else *maxburst = 0; } /* * Fix sconfig's bus width according to at_hdmac. * 1 byte -> 0, 2 bytes -> 1, 4 bytes -> 2. */ static inline u8 convert_buswidth(enum dma_slave_buswidth addr_width) { switch (addr_width) { case DMA_SLAVE_BUSWIDTH_2_BYTES: return 1; case DMA_SLAVE_BUSWIDTH_4_BYTES: return 2; default: /* For 1 byte width or fallback */ return 0; } } /*-- Controller ------------------------------------------------------*/ /** * struct at_dma - internal representation of an Atmel HDMA Controller * @chan_common: common dmaengine dma_device object members * @atdma_devtype: identifier of DMA controller compatibility * @ch_regs: memory mapped register base * @clk: dma controller clock * @save_imr: interrupt mask register that is saved on suspend/resume cycle * @all_chan_mask: all channels availlable in a mask * @dma_desc_pool: base of DMA descriptor region (DMA address) * @chan: channels table to store at_dma_chan structures */ struct at_dma { struct dma_device dma_common; void __iomem *regs; struct clk *clk; u32 save_imr; u8 all_chan_mask; struct dma_pool *dma_desc_pool; struct dma_pool *memset_pool; /* AT THE END channels table */ struct at_dma_chan chan[0]; }; #define dma_readl(atdma, name) \ __raw_readl((atdma)->regs + AT_DMA_##name) #define dma_writel(atdma, name, val) \ __raw_writel((val), (atdma)->regs + AT_DMA_##name) static inline struct at_dma *to_at_dma(struct dma_device *ddev) { return container_of(ddev, struct at_dma, dma_common); } /*-- Helper functions ------------------------------------------------*/ static struct device *chan2dev(struct dma_chan *chan) { return &chan->dev->device; } #if defined(VERBOSE_DEBUG) static void vdbg_dump_regs(struct at_dma_chan *atchan) { struct at_dma *atdma = to_at_dma(atchan->chan_common.device); dev_err(chan2dev(&atchan->chan_common), " channel %d : imr = 0x%x, chsr = 0x%x\n", atchan->chan_common.chan_id, dma_readl(atdma, EBCIMR), dma_readl(atdma, CHSR)); dev_err(chan2dev(&atchan->chan_common), " channel: s0x%x d0x%x ctrl0x%x:0x%x cfg0x%x l0x%x\n", channel_readl(atchan, SADDR), channel_readl(atchan, DADDR), channel_readl(atchan, CTRLA), channel_readl(atchan, CTRLB), channel_readl(atchan, CFG), channel_readl(atchan, DSCR)); } #else static void vdbg_dump_regs(struct at_dma_chan *atchan) {} #endif static void atc_dump_lli(struct at_dma_chan *atchan, struct at_lli *lli) { dev_crit(chan2dev(&atchan->chan_common), " desc: s%pad d%pad ctrl0x%x:0x%x l0x%pad\n", &lli->saddr, &lli->daddr, lli->ctrla, lli->ctrlb, &lli->dscr); } static void atc_setup_irq(struct at_dma *atdma, int chan_id, int on) { u32 ebci; /* enable interrupts on buffer transfer completion & error */ ebci = AT_DMA_BTC(chan_id) | AT_DMA_ERR(chan_id); if (on) dma_writel(atdma, EBCIER, ebci); else dma_writel(atdma, EBCIDR, ebci); } static void atc_enable_chan_irq(struct at_dma *atdma, int chan_id) { atc_setup_irq(atdma, chan_id, 1); } static void atc_disable_chan_irq(struct at_dma *atdma, int chan_id) { atc_setup_irq(atdma, chan_id, 0); } /** * atc_chan_is_enabled - test if given channel is enabled * @atchan: channel we want to test status */ static inline int atc_chan_is_enabled(struct at_dma_chan *atchan) { struct at_dma *atdma = to_at_dma(atchan->chan_common.device); return !!(dma_readl(atdma, CHSR) & atchan->mask); } /** * atc_chan_is_paused - test channel pause/resume status * @atchan: channel we want to test status */ static inline int atc_chan_is_paused(struct at_dma_chan *atchan) { return test_bit(ATC_IS_PAUSED, &atchan->status); } /** * atc_chan_is_cyclic - test if given channel has cyclic property set * @atchan: channel we want to test status */ static inline int atc_chan_is_cyclic(struct at_dma_chan *atchan) { return test_bit(ATC_IS_CYCLIC, &atchan->status); } /** * set_desc_eol - set end-of-link to descriptor so it will end transfer * @desc: descriptor, signle or at the end of a chain, to end chain on */ static void set_desc_eol(struct at_desc *desc) { u32 ctrlb = desc->lli.ctrlb; ctrlb &= ~ATC_IEN; ctrlb |= ATC_SRC_DSCR_DIS | ATC_DST_DSCR_DIS; desc->lli.ctrlb = ctrlb; desc->lli.dscr = 0; } #endif /* AT_HDMAC_REGS_H */