/* drivers/char/ser_a2232.c */ /* $Id: ser_a2232.c,v 0.4 2000/01/25 12:00:00 ehaase Exp $ */ /* Linux serial driver for the Amiga A2232 board */ /* This driver is MAINTAINED. Before applying any changes, please contact * the author. */ /* Copyright (c) 2000-2001 Enver Haase <ehaase@inf.fu-berlin.de> * alias The A2232 driver project <A2232@gmx.net> * All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. * */ /***************************** Documentation ************************/ /* * This driver is in EXPERIMENTAL state. That means I could not find * someone with five A2232 boards with 35 ports running at 19200 bps * at the same time and test the machine's behaviour. * However, I know that you can performance-tweak this driver (see * the source code). * One thing to consider is the time this driver consumes during the * Amiga's vertical blank interrupt. Everything that is to be done * _IS DONE_ when entering the vertical blank interrupt handler of * this driver. * However, it would be more sane to only do the job for only ONE card * instead of ALL cards at a time; or, more generally, to handle only * SOME ports instead of ALL ports at a time. * However, as long as no-one runs into problems I guess I shouldn't * change the driver as it runs fine for me :) . * * Version history of this file: * 0.4 Resolved licensing issues. * 0.3 Inclusion in the Linux/m68k tree, small fixes. * 0.2 Added documentation, minor typo fixes. * 0.1 Initial release. * * TO DO: * - Handle incoming BREAK events. I guess "Stevens: Advanced * Programming in the UNIX(R) Environment" is a good reference * on what is to be done. * - When installing as a module, don't simply 'printk' text, but * send it to the TTY used by the user. * * THANKS TO: * - Jukka Marin (65EC02 code). * - The other NetBSD developers on whose A2232 driver I had a * pretty close look. However, I didn't copy any code so it * is okay to put my code under the GPL and include it into * Linux. */ /***************************** End of Documentation *****************/ /***************************** Defines ******************************/ /* * Enables experimental 115200 (normal) 230400 (turbo) baud rate. * The A2232 specification states it can only operate at speeds up to * 19200 bits per second, and I was not able to send a file via * "sz"/"rz" and a null-modem cable from one A2232 port to another * at 115200 bits per second. * However, this might work for you. */ #undef A2232_SPEEDHACK /* * Default is not to use RTS/CTS so you could be talked to death. */ #define A2232_SUPPRESS_RTSCTS_WARNING /************************* End of Defines ***************************/ /***************************** Includes *****************************/ #include <linux/module.h> #include <linux/types.h> #include <linux/interrupt.h> #include <linux/kernel.h> #include <linux/errno.h> #include <linux/tty.h> #include <asm/setup.h> #include <asm/amigaints.h> #include <asm/amigahw.h> #include <linux/zorro.h> #include <asm/irq.h> #include <linux/mutex.h> #include <linux/delay.h> #include <linux/serial.h> #include <linux/generic_serial.h> #include <linux/tty_flip.h> #include "ser_a2232.h" #include "ser_a2232fw.h" /************************* End of Includes **************************/ /***************************** Prototypes ***************************/ /* The interrupt service routine */ static irqreturn_t a2232_vbl_inter(int irq, void *data); /* Initialize the port structures */ static void a2232_init_portstructs(void); /* Initialize and register TTY drivers. */ /* returns 0 IFF successful */ static int a2232_init_drivers(void); /* BEGIN GENERIC_SERIAL PROTOTYPES */ static void a2232_disable_tx_interrupts(void *ptr); static void a2232_enable_tx_interrupts(void *ptr); static void a2232_disable_rx_interrupts(void *ptr); static void a2232_enable_rx_interrupts(void *ptr); static int a2232_get_CD(void *ptr); static void a2232_shutdown_port(void *ptr); static int a2232_set_real_termios(void *ptr); static int a2232_chars_in_buffer(void *ptr); static void a2232_close(void *ptr); static void a2232_hungup(void *ptr); /* static void a2232_getserial (void *ptr, struct serial_struct *sp); */ /* END GENERIC_SERIAL PROTOTYPES */ /* Functions that the TTY driver struct expects */ static int a2232_ioctl(struct tty_struct *tty, struct file *file, unsigned int cmd, unsigned long arg); static void a2232_throttle(struct tty_struct *tty); static void a2232_unthrottle(struct tty_struct *tty); static int a2232_open(struct tty_struct * tty, struct file * filp); /************************* End of Prototypes ************************/ /***************************** Global variables *********************/ /*--------------------------------------------------------------------------- * Interface from generic_serial.c back here *--------------------------------------------------------------------------*/ static struct real_driver a2232_real_driver = { a2232_disable_tx_interrupts, a2232_enable_tx_interrupts, a2232_disable_rx_interrupts, a2232_enable_rx_interrupts, a2232_get_CD, a2232_shutdown_port, a2232_set_real_termios, a2232_chars_in_buffer, a2232_close, a2232_hungup, NULL /* a2232_getserial */ }; static void *a2232_driver_ID = &a2232_driver_ID; // Some memory address WE own. /* Ports structs */ static struct a2232_port a2232_ports[MAX_A2232_BOARDS*NUMLINES]; /* TTY driver structs */ static struct tty_driver *a2232_driver; /* nr of cards completely (all ports) and correctly configured */ static int nr_a2232; /* zorro_dev structs for the A2232's */ static struct zorro_dev *zd_a2232[MAX_A2232_BOARDS]; /***************************** End of Global variables **************/ /* Helper functions */ static inline volatile struct a2232memory *a2232mem(unsigned int board) { return (volatile struct a2232memory *)ZTWO_VADDR(zd_a2232[board]->resource.start); } static inline volatile struct a2232status *a2232stat(unsigned int board, unsigned int portonboard) { volatile struct a2232memory *mem = a2232mem(board); return &(mem->Status[portonboard]); } static inline void a2232_receive_char(struct a2232_port *port, int ch, int err) { /* Mostly stolen from other drivers. Maybe one could implement a more efficient version by not only transferring one character at a time. */ struct tty_struct *tty = port->gs.port.tty; #if 0 switch(err) { case TTY_BREAK: break; case TTY_PARITY: break; case TTY_OVERRUN: break; case TTY_FRAME: break; } #endif tty_insert_flip_char(tty, ch, err); tty_flip_buffer_push(tty); } /***************************** Functions ****************************/ /*** BEGIN OF REAL_DRIVER FUNCTIONS ***/ static void a2232_disable_tx_interrupts(void *ptr) { struct a2232_port *port; volatile struct a2232status *stat; unsigned long flags; port = ptr; stat = a2232stat(port->which_a2232, port->which_port_on_a2232); stat->OutDisable = -1; /* Does this here really have to be? */ local_irq_save(flags); port->gs.port.flags &= ~GS_TX_INTEN; local_irq_restore(flags); } static void a2232_enable_tx_interrupts(void *ptr) { struct a2232_port *port; volatile struct a2232status *stat; unsigned long flags; port = ptr; stat = a2232stat(port->which_a2232, port->which_port_on_a2232); stat->OutDisable = 0; /* Does this here really have to be? */ local_irq_save(flags); port->gs.port.flags |= GS_TX_INTEN; local_irq_restore(flags); } static void a2232_disable_rx_interrupts(void *ptr) { struct a2232_port *port; port = ptr; port->disable_rx = -1; } static void a2232_enable_rx_interrupts(void *ptr) { struct a2232_port *port; port = ptr; port->disable_rx = 0; } static int a2232_get_CD(void *ptr) { return ((struct a2232_port *) ptr)->cd_status; } static void a2232_shutdown_port(void *ptr) { struct a2232_port *port; volatile struct a2232status *stat; unsigned long flags; port = ptr; stat = a2232stat(port->which_a2232, port->which_port_on_a2232); local_irq_save(flags); port->gs.port.flags &= ~GS_ACTIVE; if (port->gs.port.tty && port->gs.port.tty->termios->c_cflag & HUPCL) { /* Set DTR and RTS to Low, flush output. The NetBSD driver "msc.c" does it this way. */ stat->Command = ( (stat->Command & ~A2232CMD_CMask) | A2232CMD_Close ); stat->OutFlush = -1; stat->Setup = -1; } local_irq_restore(flags); /* After analyzing control flow, I think a2232_shutdown_port is actually the last call from the system when at application level someone issues a "echo Hello >>/dev/ttyY0". Therefore I think the MOD_DEC_USE_COUNT should be here and not in "a2232_close()". See the comment in "sx.c", too. If you run into problems, compile this driver into the kernel instead of compiling it as a module. */ } static int a2232_set_real_termios(void *ptr) { unsigned int cflag, baud, chsize, stopb, parity, softflow; int rate; int a2232_param, a2232_cmd; unsigned long flags; unsigned int i; struct a2232_port *port = ptr; volatile struct a2232status *status; volatile struct a2232memory *mem; if (!port->gs.port.tty || !port->gs.port.tty->termios) return 0; status = a2232stat(port->which_a2232, port->which_port_on_a2232); mem = a2232mem(port->which_a2232); a2232_param = a2232_cmd = 0; // get baud rate baud = port->gs.baud; if (baud == 0) { /* speed == 0 -> drop DTR, do nothing else */ local_irq_save(flags); // Clear DTR (and RTS... mhhh). status->Command = ( (status->Command & ~A2232CMD_CMask) | A2232CMD_Close ); status->OutFlush = -1; status->Setup = -1; local_irq_restore(flags); return 0; } rate = A2232_BAUD_TABLE_NOAVAIL; for (i=0; i < A2232_BAUD_TABLE_NUM_RATES * 3; i += 3){ if (a2232_baud_table[i] == baud){ if (mem->Common.Crystal == A2232_TURBO) rate = a2232_baud_table[i+2]; else rate = a2232_baud_table[i+1]; } } if (rate == A2232_BAUD_TABLE_NOAVAIL){ printk("a2232: Board %d Port %d unsupported baud rate: %d baud. Using another.\n",port->which_a2232,port->which_port_on_a2232,baud); // This is useful for both (turbo or normal) Crystal versions. rate = A2232PARAM_B9600; } a2232_param |= rate; cflag = port->gs.port.tty->termios->c_cflag; // get character size chsize = cflag & CSIZE; switch (chsize){ case CS8: a2232_param |= A2232PARAM_8Bit; break; case CS7: a2232_param |= A2232PARAM_7Bit; break; case CS6: a2232_param |= A2232PARAM_6Bit; break; case CS5: a2232_param |= A2232PARAM_5Bit; break; default: printk("a2232: Board %d Port %d unsupported character size: %d. Using 8 data bits.\n", port->which_a2232,port->which_port_on_a2232,chsize); a2232_param |= A2232PARAM_8Bit; break; } // get number of stop bits stopb = cflag & CSTOPB; if (stopb){ // two stop bits instead of one printk("a2232: Board %d Port %d 2 stop bits unsupported. Using 1 stop bit.\n", port->which_a2232,port->which_port_on_a2232); } // Warn if RTS/CTS not wanted if (!(cflag & CRTSCTS)){ #ifndef A2232_SUPPRESS_RTSCTS_WARNING printk("a2232: Board %d Port %d cannot switch off firmware-implemented RTS/CTS hardware flow control.\n", port->which_a2232,port->which_port_on_a2232); #endif } /* I think this is correct. However, IXOFF means _input_ flow control and I wonder if one should care about IXON _output_ flow control, too. If this makes problems, one should turn the A2232 firmware XON/XOFF "SoftFlow" flow control off and use the conventional way of inserting START/STOP characters by hand in throttle()/unthrottle(). */ softflow = !!( port->gs.port.tty->termios->c_iflag & IXOFF ); // get Parity (Enabled/Disabled? If Enabled, Odd or Even?) parity = cflag & (PARENB | PARODD); if (parity & PARENB){ if (parity & PARODD){ a2232_cmd |= A2232CMD_OddParity; } else{ a2232_cmd |= A2232CMD_EvenParity; } } else a2232_cmd |= A2232CMD_NoParity; /* Hmm. Maybe an own a2232_port structure member would be cleaner? */ if (cflag & CLOCAL) port->gs.port.flags &= ~ASYNC_CHECK_CD; else port->gs.port.flags |= ASYNC_CHECK_CD; /* Now we have all parameters and can go to set them: */ local_irq_save(flags); status->Param = a2232_param | A2232PARAM_RcvBaud; status->Command = a2232_cmd | A2232CMD_Open | A2232CMD_Enable; status->SoftFlow = softflow; status->OutDisable = 0; status->Setup = -1; local_irq_restore(flags); return 0; } static int a2232_chars_in_buffer(void *ptr) { struct a2232_port *port; volatile struct a2232status *status; unsigned char ret; /* we need modulo-256 arithmetics */ port = ptr; status = a2232stat(port->which_a2232, port->which_port_on_a2232); #if A2232_IOBUFLEN != 256 #error "Re-Implement a2232_chars_in_buffer()!" #endif ret = (status->OutHead - status->OutTail); return ret; } static void a2232_close(void *ptr) { a2232_disable_tx_interrupts(ptr); a2232_disable_rx_interrupts(ptr); /* see the comment in a2232_shutdown_port above. */ } static void a2232_hungup(void *ptr) { a2232_close(ptr); } /*** END OF REAL_DRIVER FUNCTIONS ***/ /*** BEGIN FUNCTIONS EXPECTED BY TTY DRIVER STRUCTS ***/ static int a2232_ioctl( struct tty_struct *tty, struct file *file, unsigned int cmd, unsigned long arg) { return -ENOIOCTLCMD; } static void a2232_throttle(struct tty_struct *tty) { /* Throttle: System cannot take another chars: Drop RTS or send the STOP char or whatever. The A2232 firmware does RTS/CTS anyway, and XON/XOFF if switched on. So the only thing we can do at this layer here is not taking any characters out of the A2232 buffer any more. */ struct a2232_port *port = (struct a2232_port *) tty->driver_data; port->throttle_input = -1; } static void a2232_unthrottle(struct tty_struct *tty) { /* Unthrottle: dual to "throttle()" above. */ struct a2232_port *port = (struct a2232_port *) tty->driver_data; port->throttle_input = 0; } static int a2232_open(struct tty_struct * tty, struct file * filp) { /* More or less stolen from other drivers. */ int line; int retval; struct a2232_port *port; line = tty->index; port = &a2232_ports[line]; tty->driver_data = port; port->gs.port.tty = tty; port->gs.port.count++; retval = gs_init_port(&port->gs); if (retval) { port->gs.port.count--; return retval; } port->gs.port.flags |= GS_ACTIVE; retval = gs_block_til_ready(port, filp); if (retval) { port->gs.port.count--; return retval; } a2232_enable_rx_interrupts(port); return 0; } /*** END OF FUNCTIONS EXPECTED BY TTY DRIVER STRUCTS ***/ static irqreturn_t a2232_vbl_inter(int irq, void *data) { #if A2232_IOBUFLEN != 256 #error "Re-Implement a2232_vbl_inter()!" #endif struct a2232_port *port; volatile struct a2232memory *mem; volatile struct a2232status *status; unsigned char newhead; unsigned char bufpos; /* Must be unsigned char. We need the modulo-256 arithmetics */ unsigned char ncd, ocd, ccd; /* names consistent with the NetBSD driver */ volatile u_char *ibuf, *cbuf, *obuf; int ch, err, n, p; for (n = 0; n < nr_a2232; n++){ /* for every completely initialized A2232 board */ mem = a2232mem(n); for (p = 0; p < NUMLINES; p++){ /* for every port on this board */ err = 0; port = &a2232_ports[n*NUMLINES+p]; if ( port->gs.port.flags & GS_ACTIVE ){ /* if the port is used */ status = a2232stat(n,p); if (!port->disable_rx && !port->throttle_input){ /* If input is not disabled */ newhead = status->InHead; /* 65EC02 write pointer */ bufpos = status->InTail; /* check for input for this port */ if (newhead != bufpos) { /* buffer for input chars/events */ ibuf = mem->InBuf[p]; /* data types of bytes in ibuf */ cbuf = mem->InCtl[p]; /* do for all chars */ while (bufpos != newhead) { /* which type of input data? */ switch (cbuf[bufpos]) { /* switch on input event (CD, BREAK, etc.) */ case A2232INCTL_EVENT: switch (ibuf[bufpos++]) { case A2232EVENT_Break: /* TODO: Handle BREAK signal */ break; /* A2232EVENT_CarrierOn and A2232EVENT_CarrierOff are handled in a separate queue and should not occur here. */ case A2232EVENT_Sync: printk("A2232: 65EC02 software sent SYNC event, don't know what to do. Ignoring."); break; default: printk("A2232: 65EC02 software broken, unknown event type %d occurred.\n",ibuf[bufpos-1]); } /* event type switch */ break; case A2232INCTL_CHAR: /* Receive incoming char */ a2232_receive_char(port, ibuf[bufpos], err); bufpos++; break; default: printk("A2232: 65EC02 software broken, unknown data type %d occurred.\n",cbuf[bufpos]); bufpos++; } /* switch on input data type */ } /* while there's something in the buffer */ status->InTail = bufpos; /* tell 65EC02 what we've read */ } /* if there was something in the buffer */ } /* If input is not disabled */ /* Now check if there's something to output */ obuf = mem->OutBuf[p]; bufpos = status->OutHead; while ( (port->gs.xmit_cnt > 0) && (!port->gs.port.tty->stopped) && (!port->gs.port.tty->hw_stopped) ){ /* While there are chars to transmit */ if (((bufpos+1) & A2232_IOBUFLENMASK) != status->OutTail) { /* If the A2232 buffer is not full */ ch = port->gs.xmit_buf[port->gs.xmit_tail]; /* get the next char to transmit */ port->gs.xmit_tail = (port->gs.xmit_tail+1) & (SERIAL_XMIT_SIZE-1); /* modulo-addition for the gs.xmit_buf ring-buffer */ obuf[bufpos++] = ch; /* put it into the A2232 buffer */ port->gs.xmit_cnt--; } else{ /* If A2232 the buffer is full */ break; /* simply stop filling it. */ } } status->OutHead = bufpos; /* WakeUp if output buffer runs low */ if ((port->gs.xmit_cnt <= port->gs.wakeup_chars) && port->gs.port.tty) { tty_wakeup(port->gs.port.tty); } } // if the port is used } // for every port on the board /* Now check the CD message queue */ newhead = mem->Common.CDHead; bufpos = mem->Common.CDTail; if (newhead != bufpos){ /* There are CD events in queue */ ocd = mem->Common.CDStatus; /* get old status bits */ while (newhead != bufpos){ /* read all events */ ncd = mem->CDBuf[bufpos++]; /* get one event */ ccd = ncd ^ ocd; /* mask of changed lines */ ocd = ncd; /* save new status bits */ for(p=0; p < NUMLINES; p++){ /* for all ports */ if (ccd & 1){ /* this one changed */ struct a2232_port *port = &a2232_ports[n*7+p]; port->cd_status = !(ncd & 1); /* ncd&1 <=> CD is now off */ if (!(port->gs.port.flags & ASYNC_CHECK_CD)) ; /* Don't report DCD changes */ else if (port->cd_status) { // if DCD on: DCD went UP! /* Are we blocking in open?*/ wake_up_interruptible(&port->gs.port.open_wait); } else { // if DCD off: DCD went DOWN! if (port->gs.port.tty) tty_hangup (port->gs.port.tty); } } // if CD changed for this port ccd >>= 1; ncd >>= 1; /* Shift bits for next line */ } // for every port } // while CD events in queue mem->Common.CDStatus = ocd; /* save new status */ mem->Common.CDTail = bufpos; /* remove events */ } // if events in CD queue } // for every completely initialized A2232 board return IRQ_HANDLED; } static void a2232_init_portstructs(void) { struct a2232_port *port; int i; for (i = 0; i < MAX_A2232_BOARDS*NUMLINES; i++) { port = a2232_ports + i; port->which_a2232 = i/NUMLINES; port->which_port_on_a2232 = i%NUMLINES; port->disable_rx = port->throttle_input = port->cd_status = 0; port->gs.magic = A2232_MAGIC; port->gs.close_delay = HZ/2; port->gs.closing_wait = 30 * HZ; port->gs.rd = &a2232_real_driver; #ifdef NEW_WRITE_LOCKING mutex_init(&(port->gs.port_write_mutex)); #endif init_waitqueue_head(&port->gs.port.open_wait); init_waitqueue_head(&port->gs.port.close_wait); } } static const struct tty_operations a2232_ops = { .open = a2232_open, .close = gs_close, .write = gs_write, .put_char = gs_put_char, .flush_chars = gs_flush_chars, .write_room = gs_write_room, .chars_in_buffer = gs_chars_in_buffer, .flush_buffer = gs_flush_buffer, .ioctl = a2232_ioctl, .throttle = a2232_throttle, .unthrottle = a2232_unthrottle, .set_termios = gs_set_termios, .stop = gs_stop, .start = gs_start, .hangup = gs_hangup, }; static int a2232_init_drivers(void) { int error; a2232_driver = alloc_tty_driver(NUMLINES * nr_a2232); if (!a2232_driver) return -ENOMEM; a2232_driver->owner = THIS_MODULE; a2232_driver->driver_name = "commodore_a2232"; a2232_driver->name = "ttyY"; a2232_driver->major = A2232_NORMAL_MAJOR; a2232_driver->type = TTY_DRIVER_TYPE_SERIAL; a2232_driver->subtype = SERIAL_TYPE_NORMAL; a2232_driver->init_termios = tty_std_termios; a2232_driver->init_termios.c_cflag = B9600 | CS8 | CREAD | HUPCL | CLOCAL; a2232_driver->init_termios.c_ispeed = 9600; a2232_driver->init_termios.c_ospeed = 9600; a2232_driver->flags = TTY_DRIVER_REAL_RAW; tty_set_operations(a2232_driver, &a2232_ops); if ((error = tty_register_driver(a2232_driver))) { printk(KERN_ERR "A2232: Couldn't register A2232 driver, error = %d\n", error); put_tty_driver(a2232_driver); return 1; } return 0; } static int __init a2232board_init(void) { struct zorro_dev *z; unsigned int boardaddr; int bcount; short start; u_char *from; volatile u_char *to; volatile struct a2232memory *mem; #ifdef CONFIG_SMP return -ENODEV; /* This driver is not SMP aware. Is there an SMP ZorroII-bus-machine? */ #endif if (!MACH_IS_AMIGA){ return -ENODEV; } printk("Commodore A2232 driver initializing.\n"); /* Say that we're alive. */ z = NULL; nr_a2232 = 0; while ( (z = zorro_find_device(ZORRO_WILDCARD, z)) ){ if ( (z->id != ZORRO_PROD_CBM_A2232_PROTOTYPE) && (z->id != ZORRO_PROD_CBM_A2232) ){ continue; // The board found was no A2232 } if (!zorro_request_device(z,"A2232 driver")) continue; printk("Commodore A2232 found (#%d).\n",nr_a2232); zd_a2232[nr_a2232] = z; boardaddr = ZTWO_VADDR( z->resource.start ); printk("Board is located at address 0x%x, size is 0x%x.\n", boardaddr, (unsigned int) ((z->resource.end+1) - (z->resource.start))); mem = (volatile struct a2232memory *) boardaddr; (void) mem->Enable6502Reset; /* copy the code across to the board */ to = (u_char *)mem; from = a2232_65EC02code; bcount = sizeof(a2232_65EC02code) - 2; start = *(short *)from; from += sizeof(start); to += start; while(bcount--) *to++ = *from++; printk("65EC02 software uploaded to the A2232 memory.\n"); mem->Common.Crystal = A2232_UNKNOWN; /* use automatic speed check */ /* start 6502 running */ (void) mem->ResetBoard; printk("A2232's 65EC02 CPU up and running.\n"); /* wait until speed detector has finished */ for (bcount = 0; bcount < 2000; bcount++) { udelay(1000); if (mem->Common.Crystal) break; } printk((mem->Common.Crystal?"A2232 oscillator crystal detected by 65EC02 software: ":"65EC02 software could not determine A2232 oscillator crystal: ")); switch (mem->Common.Crystal){ case A2232_UNKNOWN: printk("Unknown crystal.\n"); break; case A2232_NORMAL: printk ("Normal crystal.\n"); break; case A2232_TURBO: printk ("Turbo crystal.\n"); break; default: printk ("0x%x. Huh?\n",mem->Common.Crystal); } nr_a2232++; } printk("Total: %d A2232 boards initialized.\n", nr_a2232); /* Some status report if no card was found */ a2232_init_portstructs(); /* a2232_init_drivers also registers the drivers. Must be here because all boards have to be detected first. */ if (a2232_init_drivers()) return -ENODEV; // maybe we should use a different -Exxx? request_irq(IRQ_AMIGA_VERTB, a2232_vbl_inter, 0, "A2232 serial VBL", a2232_driver_ID); return 0; } static void __exit a2232board_exit(void) { int i; for (i = 0; i < nr_a2232; i++) { zorro_release_device(zd_a2232[i]); } tty_unregister_driver(a2232_driver); put_tty_driver(a2232_driver); free_irq(IRQ_AMIGA_VERTB, a2232_driver_ID); } module_init(a2232board_init); module_exit(a2232board_exit); MODULE_AUTHOR("Enver Haase"); MODULE_DESCRIPTION("Amiga A2232 multi-serial board driver"); MODULE_LICENSE("GPL");