/* SPDX-License-Identifier: GPL-2.0 */ /* * Copyright C 2016, Oracle and/or its affiliates. All rights reserved. */ .code32 .text #define _pa(x) ((x) - __START_KERNEL_map) #include #include #include #include #include #include #include #include #include __HEAD /* * Entry point for PVH guests. * * Xen ABI specifies the following register state when we come here: * * - `ebx`: contains the physical memory address where the loader has placed * the boot start info structure. * - `cr0`: bit 0 (PE) must be set. All the other writeable bits are cleared. * - `cr4`: all bits are cleared. * - `cs `: must be a 32-bit read/execute code segment with a base of ‘0’ * and a limit of ‘0xFFFFFFFF’. The selector value is unspecified. * - `ds`, `es`: must be a 32-bit read/write data segment with a base of * ‘0’ and a limit of ‘0xFFFFFFFF’. The selector values are all * unspecified. * - `tr`: must be a 32-bit TSS (active) with a base of '0' and a limit * of '0x67'. * - `eflags`: bit 17 (VM) must be cleared. Bit 9 (IF) must be cleared. * Bit 8 (TF) must be cleared. Other bits are all unspecified. * * All other processor registers and flag bits are unspecified. The OS is in * charge of setting up it's own stack, GDT and IDT. */ #define PVH_GDT_ENTRY_CS 1 #define PVH_GDT_ENTRY_DS 2 #define PVH_GDT_ENTRY_CANARY 3 #define PVH_CS_SEL (PVH_GDT_ENTRY_CS * 8) #define PVH_DS_SEL (PVH_GDT_ENTRY_DS * 8) #define PVH_CANARY_SEL (PVH_GDT_ENTRY_CANARY * 8) ENTRY(pvh_start_xen) cld lgdt (_pa(gdt)) mov $PVH_DS_SEL,%eax mov %eax,%ds mov %eax,%es mov %eax,%ss /* Stash hvm_start_info. */ mov $_pa(pvh_start_info), %edi mov %ebx, %esi mov _pa(pvh_start_info_sz), %ecx shr $2,%ecx rep movsl mov $_pa(early_stack_end), %esp /* Enable PAE mode. */ mov %cr4, %eax orl $X86_CR4_PAE, %eax mov %eax, %cr4 #ifdef CONFIG_X86_64 /* Enable Long mode. */ mov $MSR_EFER, %ecx rdmsr btsl $_EFER_LME, %eax wrmsr /* Enable pre-constructed page tables. */ mov $_pa(init_top_pgt), %eax mov %eax, %cr3 mov $(X86_CR0_PG | X86_CR0_PE), %eax mov %eax, %cr0 /* Jump to 64-bit mode. */ ljmp $PVH_CS_SEL, $_pa(1f) /* 64-bit entry point. */ .code64 1: /* Set base address in stack canary descriptor. */ mov $MSR_GS_BASE,%ecx mov $_pa(canary), %eax xor %edx, %edx wrmsr call xen_prepare_pvh /* startup_64 expects boot_params in %rsi. */ mov $_pa(pvh_bootparams), %rsi mov $_pa(startup_64), %rax jmp *%rax #else /* CONFIG_X86_64 */ /* Set base address in stack canary descriptor. */ movl $_pa(gdt_start),%eax movl $_pa(canary),%ecx movw %cx, (PVH_GDT_ENTRY_CANARY * 8) + 2(%eax) shrl $16, %ecx movb %cl, (PVH_GDT_ENTRY_CANARY * 8) + 4(%eax) movb %ch, (PVH_GDT_ENTRY_CANARY * 8) + 7(%eax) mov $PVH_CANARY_SEL,%eax mov %eax,%gs call mk_early_pgtbl_32 mov $_pa(initial_page_table), %eax mov %eax, %cr3 mov %cr0, %eax or $(X86_CR0_PG | X86_CR0_PE), %eax mov %eax, %cr0 ljmp $PVH_CS_SEL, $1f 1: call xen_prepare_pvh mov $_pa(pvh_bootparams), %esi /* startup_32 doesn't expect paging and PAE to be on. */ ljmp $PVH_CS_SEL, $_pa(2f) 2: mov %cr0, %eax and $~X86_CR0_PG, %eax mov %eax, %cr0 mov %cr4, %eax and $~X86_CR4_PAE, %eax mov %eax, %cr4 ljmp $PVH_CS_SEL, $_pa(startup_32) #endif END(pvh_start_xen) .section ".init.data","aw" .balign 8 gdt: .word gdt_end - gdt_start .long _pa(gdt_start) .word 0 gdt_start: .quad 0x0000000000000000 /* NULL descriptor */ #ifdef CONFIG_X86_64 .quad GDT_ENTRY(0xa09a, 0, 0xfffff) /* PVH_CS_SEL */ #else .quad GDT_ENTRY(0xc09a, 0, 0xfffff) /* PVH_CS_SEL */ #endif .quad GDT_ENTRY(0xc092, 0, 0xfffff) /* PVH_DS_SEL */ .quad GDT_ENTRY(0x4090, 0, 0x18) /* PVH_CANARY_SEL */ gdt_end: .balign 16 canary: .fill 48, 1, 0 early_stack: .fill 256, 1, 0 early_stack_end: ELFNOTE(Xen, XEN_ELFNOTE_PHYS32_ENTRY, _ASM_PTR (pvh_start_xen - __START_KERNEL_map))