/* * linux/arch/arm/mm/proc-v7.S * * Copyright (C) 2001 Deep Blue Solutions Ltd. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. * * This is the "shell" of the ARMv7 processor support. */ #include #include #include #include #include #include #include #include "proc-macros.S" #ifdef CONFIG_ARM_LPAE #include "proc-v7-3level.S" #else #include "proc-v7-2level.S" #endif ENTRY(cpu_v7_proc_init) mov pc, lr ENDPROC(cpu_v7_proc_init) ENTRY(cpu_v7_proc_fin) mrc p15, 0, r0, c1, c0, 0 @ ctrl register bic r0, r0, #0x1000 @ ...i............ bic r0, r0, #0x0006 @ .............ca. mcr p15, 0, r0, c1, c0, 0 @ disable caches mov pc, lr ENDPROC(cpu_v7_proc_fin) /* * cpu_v7_reset(loc) * * Perform a soft reset of the system. Put the CPU into the * same state as it would be if it had been reset, and branch * to what would be the reset vector. * * - loc - location to jump to for soft reset * * This code must be executed using a flat identity mapping with * caches disabled. */ .align 5 .pushsection .idmap.text, "ax" ENTRY(cpu_v7_reset) mrc p15, 0, r1, c1, c0, 0 @ ctrl register bic r1, r1, #0x1 @ ...............m THUMB( bic r1, r1, #1 << 30 ) @ SCTLR.TE (Thumb exceptions) mcr p15, 0, r1, c1, c0, 0 @ disable MMU isb bx r0 ENDPROC(cpu_v7_reset) .popsection /* * cpu_v7_do_idle() * * Idle the processor (eg, wait for interrupt). * * IRQs are already disabled. */ ENTRY(cpu_v7_do_idle) dsb @ WFI may enter a low-power mode wfi mov pc, lr ENDPROC(cpu_v7_do_idle) ENTRY(cpu_v7_dcache_clean_area) #ifndef TLB_CAN_READ_FROM_L1_CACHE dcache_line_size r2, r3 1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry add r0, r0, r2 subs r1, r1, r2 bhi 1b dsb #endif mov pc, lr ENDPROC(cpu_v7_dcache_clean_area) string cpu_v7_name, "ARMv7 Processor" .align /* Suspend/resume support: derived from arch/arm/mach-s5pv210/sleep.S */ .globl cpu_v7_suspend_size .equ cpu_v7_suspend_size, 4 * 8 #ifdef CONFIG_ARM_CPU_SUSPEND ENTRY(cpu_v7_do_suspend) stmfd sp!, {r4 - r10, lr} mrc p15, 0, r4, c13, c0, 0 @ FCSE/PID mrc p15, 0, r5, c13, c0, 3 @ User r/o thread ID stmia r0!, {r4 - r5} mrc p15, 0, r6, c3, c0, 0 @ Domain ID mrc p15, 0, r7, c2, c0, 1 @ TTB 1 mrc p15, 0, r11, c2, c0, 2 @ TTB control register mrc p15, 0, r8, c1, c0, 0 @ Control register mrc p15, 0, r9, c1, c0, 1 @ Auxiliary control register mrc p15, 0, r10, c1, c0, 2 @ Co-processor access control stmia r0, {r6 - r11} ldmfd sp!, {r4 - r10, pc} ENDPROC(cpu_v7_do_suspend) ENTRY(cpu_v7_do_resume) mov ip, #0 mcr p15, 0, ip, c8, c7, 0 @ invalidate TLBs mcr p15, 0, ip, c7, c5, 0 @ invalidate I cache mcr p15, 0, ip, c13, c0, 1 @ set reserved context ID ldmia r0!, {r4 - r5} mcr p15, 0, r4, c13, c0, 0 @ FCSE/PID mcr p15, 0, r5, c13, c0, 3 @ User r/o thread ID ldmia r0, {r6 - r11} mcr p15, 0, r6, c3, c0, 0 @ Domain ID #ifndef CONFIG_ARM_LPAE ALT_SMP(orr r1, r1, #TTB_FLAGS_SMP) ALT_UP(orr r1, r1, #TTB_FLAGS_UP) #endif mcr p15, 0, r1, c2, c0, 0 @ TTB 0 mcr p15, 0, r7, c2, c0, 1 @ TTB 1 mcr p15, 0, r11, c2, c0, 2 @ TTB control register mrc p15, 0, r4, c1, c0, 1 @ Read Auxiliary control register teq r4, r9 @ Is it already set? mcrne p15, 0, r9, c1, c0, 1 @ No, so write it mcr p15, 0, r10, c1, c0, 2 @ Co-processor access control ldr r4, =PRRR @ PRRR ldr r5, =NMRR @ NMRR mcr p15, 0, r4, c10, c2, 0 @ write PRRR mcr p15, 0, r5, c10, c2, 1 @ write NMRR isb dsb mov r0, r8 @ control register b cpu_resume_mmu ENDPROC(cpu_v7_do_resume) #endif __CPUINIT /* * __v7_setup * * Initialise TLB, Caches, and MMU state ready to switch the MMU * on. Return in r0 the new CP15 C1 control register setting. * * This should be able to cover all ARMv7 cores. * * It is assumed that: * - cache type register is implemented */ __v7_ca5mp_setup: __v7_ca9mp_setup: mov r10, #(1 << 0) @ TLB ops broadcasting b 1f __v7_ca7mp_setup: __v7_ca15mp_setup: mov r10, #0 1: #ifdef CONFIG_SMP ALT_SMP(mrc p15, 0, r0, c1, c0, 1) ALT_UP(mov r0, #(1 << 6)) @ fake it for UP tst r0, #(1 << 6) @ SMP/nAMP mode enabled? orreq r0, r0, #(1 << 6) @ Enable SMP/nAMP mode orreq r0, r0, r10 @ Enable CPU-specific SMP bits mcreq p15, 0, r0, c1, c0, 1 #endif __v7_setup: adr r12, __v7_setup_stack @ the local stack stmia r12, {r0-r5, r7, r9, r11, lr} bl v7_flush_dcache_louis ldmia r12, {r0-r5, r7, r9, r11, lr} mrc p15, 0, r0, c0, c0, 0 @ read main ID register and r10, r0, #0xff000000 @ ARM? teq r10, #0x41000000 bne 3f and r5, r0, #0x00f00000 @ variant and r6, r0, #0x0000000f @ revision orr r6, r6, r5, lsr #20-4 @ combine variant and revision ubfx r0, r0, #4, #12 @ primary part number /* Cortex-A8 Errata */ ldr r10, =0x00000c08 @ Cortex-A8 primary part number teq r0, r10 bne 2f #ifdef CONFIG_ARM_ERRATA_430973 teq r5, #0x00100000 @ only present in r1p* mrceq p15, 0, r10, c1, c0, 1 @ read aux control register orreq r10, r10, #(1 << 6) @ set IBE to 1 mcreq p15, 0, r10, c1, c0, 1 @ write aux control register #endif #ifdef CONFIG_ARM_ERRATA_458693 teq r6, #0x20 @ only present in r2p0 mrceq p15, 0, r10, c1, c0, 1 @ read aux control register orreq r10, r10, #(1 << 5) @ set L1NEON to 1 orreq r10, r10, #(1 << 9) @ set PLDNOP to 1 mcreq p15, 0, r10, c1, c0, 1 @ write aux control register #endif #ifdef CONFIG_ARM_ERRATA_460075 teq r6, #0x20 @ only present in r2p0 mrceq p15, 1, r10, c9, c0, 2 @ read L2 cache aux ctrl register tsteq r10, #1 << 22 orreq r10, r10, #(1 << 22) @ set the Write Allocate disable bit mcreq p15, 1, r10, c9, c0, 2 @ write the L2 cache aux ctrl register #endif b 3f /* Cortex-A9 Errata */ 2: ldr r10, =0x00000c09 @ Cortex-A9 primary part number teq r0, r10 bne 3f #ifdef CONFIG_ARM_ERRATA_742230 cmp r6, #0x22 @ only present up to r2p2 mrcle p15, 0, r10, c15, c0, 1 @ read diagnostic register orrle r10, r10, #1 << 4 @ set bit #4 mcrle p15, 0, r10, c15, c0, 1 @ write diagnostic register #endif #ifdef CONFIG_ARM_ERRATA_742231 teq r6, #0x20 @ present in r2p0 teqne r6, #0x21 @ present in r2p1 teqne r6, #0x22 @ present in r2p2 mrceq p15, 0, r10, c15, c0, 1 @ read diagnostic register orreq r10, r10, #1 << 12 @ set bit #12 orreq r10, r10, #1 << 22 @ set bit #22 mcreq p15, 0, r10, c15, c0, 1 @ write diagnostic register #endif #ifdef CONFIG_ARM_ERRATA_743622 teq r5, #0x00200000 @ only present in r2p* mrceq p15, 0, r10, c15, c0, 1 @ read diagnostic register orreq r10, r10, #1 << 6 @ set bit #6 mcreq p15, 0, r10, c15, c0, 1 @ write diagnostic register #endif #if defined(CONFIG_ARM_ERRATA_751472) && defined(CONFIG_SMP) ALT_SMP(cmp r6, #0x30) @ present prior to r3p0 ALT_UP_B(1f) mrclt p15, 0, r10, c15, c0, 1 @ read diagnostic register orrlt r10, r10, #1 << 11 @ set bit #11 mcrlt p15, 0, r10, c15, c0, 1 @ write diagnostic register 1: #endif 3: mov r10, #0 mcr p15, 0, r10, c7, c5, 0 @ I+BTB cache invalidate dsb #ifdef CONFIG_MMU mcr p15, 0, r10, c8, c7, 0 @ invalidate I + D TLBs v7_ttb_setup r10, r4, r8, r5 @ TTBCR, TTBRx setup ldr r5, =PRRR @ PRRR ldr r6, =NMRR @ NMRR mcr p15, 0, r5, c10, c2, 0 @ write PRRR mcr p15, 0, r6, c10, c2, 1 @ write NMRR #endif #ifndef CONFIG_ARM_THUMBEE mrc p15, 0, r0, c0, c1, 0 @ read ID_PFR0 for ThumbEE and r0, r0, #(0xf << 12) @ ThumbEE enabled field teq r0, #(1 << 12) @ check if ThumbEE is present bne 1f mov r5, #0 mcr p14, 6, r5, c1, c0, 0 @ Initialize TEEHBR to 0 mrc p14, 6, r0, c0, c0, 0 @ load TEECR orr r0, r0, #1 @ set the 1st bit in order to mcr p14, 6, r0, c0, c0, 0 @ stop userspace TEEHBR access 1: #endif adr r5, v7_crval ldmia r5, {r5, r6} #ifdef CONFIG_CPU_ENDIAN_BE8 orr r6, r6, #1 << 25 @ big-endian page tables #endif #ifdef CONFIG_SWP_EMULATE orr r5, r5, #(1 << 10) @ set SW bit in "clear" bic r6, r6, #(1 << 10) @ clear it in "mmuset" #endif mrc p15, 0, r0, c1, c0, 0 @ read control register bic r0, r0, r5 @ clear bits them orr r0, r0, r6 @ set them THUMB( orr r0, r0, #1 << 30 ) @ Thumb exceptions mov pc, lr @ return to head.S:__ret ENDPROC(__v7_setup) .align 2 __v7_setup_stack: .space 4 * 11 @ 11 registers __INITDATA @ define struct processor (see and proc-macros.S) define_processor_functions v7, dabort=v7_early_abort, pabort=v7_pabort, suspend=1 .section ".rodata" string cpu_arch_name, "armv7" string cpu_elf_name, "v7" .align .section ".proc.info.init", #alloc, #execinstr /* * Standard v7 proc info content */ .macro __v7_proc initfunc, mm_mmuflags = 0, io_mmuflags = 0, hwcaps = 0 ALT_SMP(.long PMD_TYPE_SECT | PMD_SECT_AP_WRITE | PMD_SECT_AP_READ | \ PMD_SECT_AF | PMD_FLAGS_SMP | \mm_mmuflags) ALT_UP(.long PMD_TYPE_SECT | PMD_SECT_AP_WRITE | PMD_SECT_AP_READ | \ PMD_SECT_AF | PMD_FLAGS_UP | \mm_mmuflags) .long PMD_TYPE_SECT | PMD_SECT_AP_WRITE | \ PMD_SECT_AP_READ | PMD_SECT_AF | \io_mmuflags W(b) \initfunc .long cpu_arch_name .long cpu_elf_name .long HWCAP_SWP | HWCAP_HALF | HWCAP_THUMB | HWCAP_FAST_MULT | \ HWCAP_EDSP | HWCAP_TLS | \hwcaps .long cpu_v7_name .long v7_processor_functions .long v7wbi_tlb_fns .long v6_user_fns .long v7_cache_fns .endm #ifndef CONFIG_ARM_LPAE /* * ARM Ltd. Cortex A5 processor. */ .type __v7_ca5mp_proc_info, #object __v7_ca5mp_proc_info: .long 0x410fc050 .long 0xff0ffff0 __v7_proc __v7_ca5mp_setup .size __v7_ca5mp_proc_info, . - __v7_ca5mp_proc_info /* * ARM Ltd. Cortex A9 processor. */ .type __v7_ca9mp_proc_info, #object __v7_ca9mp_proc_info: .long 0x410fc090 .long 0xff0ffff0 __v7_proc __v7_ca9mp_setup .size __v7_ca9mp_proc_info, . - __v7_ca9mp_proc_info #endif /* CONFIG_ARM_LPAE */ /* * ARM Ltd. Cortex A7 processor. */ .type __v7_ca7mp_proc_info, #object __v7_ca7mp_proc_info: .long 0x410fc070 .long 0xff0ffff0 __v7_proc __v7_ca7mp_setup, hwcaps = HWCAP_IDIV .size __v7_ca7mp_proc_info, . - __v7_ca7mp_proc_info /* * ARM Ltd. Cortex A15 processor. */ .type __v7_ca15mp_proc_info, #object __v7_ca15mp_proc_info: .long 0x410fc0f0 .long 0xff0ffff0 __v7_proc __v7_ca15mp_setup, hwcaps = HWCAP_IDIV .size __v7_ca15mp_proc_info, . - __v7_ca15mp_proc_info /* * Match any ARMv7 processor core. */ .type __v7_proc_info, #object __v7_proc_info: .long 0x000f0000 @ Required ID value .long 0x000f0000 @ Mask for ID __v7_proc __v7_setup .size __v7_proc_info, . - __v7_proc_info