/* * Copyright 2013 Maxime Ripard * * Maxime Ripard * * The code contained herein is licensed under the GNU General Public * License. You may obtain a copy of the GNU General Public License * Version 2 or later at the following locations: * * http://www.opensource.org/licenses/gpl-license.html * http://www.gnu.org/copyleft/gpl.html */ /include/ "skeleton.dtsi" / { interrupt-parent = <&gic>; aliases { serial0 = &uart0; serial1 = &uart1; serial2 = &uart2; serial3 = &uart3; serial4 = &uart4; serial5 = &uart5; }; cpus { #address-cells = <1>; #size-cells = <0>; cpu@0 { compatible = "arm,cortex-a7"; device_type = "cpu"; reg = <0>; }; cpu@1 { compatible = "arm,cortex-a7"; device_type = "cpu"; reg = <1>; }; cpu@2 { compatible = "arm,cortex-a7"; device_type = "cpu"; reg = <2>; }; cpu@3 { compatible = "arm,cortex-a7"; device_type = "cpu"; reg = <3>; }; }; memory { reg = <0x40000000 0x80000000>; }; clocks { #address-cells = <1>; #size-cells = <1>; ranges; osc24M: osc24M { #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <24000000>; }; osc32k: clk@0 { #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <32768>; clock-output-names = "osc32k"; }; pll1: clk@01c20000 { #clock-cells = <0>; compatible = "allwinner,sun6i-a31-pll1-clk"; reg = <0x01c20000 0x4>; clocks = <&osc24M>; clock-output-names = "pll1"; }; pll6: clk@01c20028 { #clock-cells = <0>; compatible = "allwinner,sun6i-a31-pll6-clk"; reg = <0x01c20028 0x4>; clocks = <&osc24M>; clock-output-names = "pll6"; }; cpu: cpu@01c20050 { #clock-cells = <0>; compatible = "allwinner,sun4i-a10-cpu-clk"; reg = <0x01c20050 0x4>; /* * PLL1 is listed twice here. * While it looks suspicious, it's actually documented * that way both in the datasheet and in the code from * Allwinner. */ clocks = <&osc32k>, <&osc24M>, <&pll1>, <&pll1>; clock-output-names = "cpu"; }; axi: axi@01c20050 { #clock-cells = <0>; compatible = "allwinner,sun4i-a10-axi-clk"; reg = <0x01c20050 0x4>; clocks = <&cpu>; clock-output-names = "axi"; }; ahb1_mux: ahb1_mux@01c20054 { #clock-cells = <0>; compatible = "allwinner,sun6i-a31-ahb1-mux-clk"; reg = <0x01c20054 0x4>; clocks = <&osc32k>, <&osc24M>, <&axi>, <&pll6>; clock-output-names = "ahb1_mux"; }; ahb1: ahb1@01c20054 { #clock-cells = <0>; compatible = "allwinner,sun4i-a10-ahb-clk"; reg = <0x01c20054 0x4>; clocks = <&ahb1_mux>; clock-output-names = "ahb1"; }; ahb1_gates: clk@01c20060 { #clock-cells = <1>; compatible = "allwinner,sun6i-a31-ahb1-gates-clk"; reg = <0x01c20060 0x8>; clocks = <&ahb1>; clock-output-names = "ahb1_mipidsi", "ahb1_ss", "ahb1_dma", "ahb1_mmc0", "ahb1_mmc1", "ahb1_mmc2", "ahb1_mmc3", "ahb1_nand1", "ahb1_nand0", "ahb1_sdram", "ahb1_gmac", "ahb1_ts", "ahb1_hstimer", "ahb1_spi0", "ahb1_spi1", "ahb1_spi2", "ahb1_spi3", "ahb1_otg", "ahb1_ehci0", "ahb1_ehci1", "ahb1_ohci0", "ahb1_ohci1", "ahb1_ohci2", "ahb1_ve", "ahb1_lcd0", "ahb1_lcd1", "ahb1_csi", "ahb1_hdmi", "ahb1_de0", "ahb1_de1", "ahb1_fe0", "ahb1_fe1", "ahb1_mp", "ahb1_gpu", "ahb1_deu0", "ahb1_deu1", "ahb1_drc0", "ahb1_drc1"; }; apb1: apb1@01c20054 { #clock-cells = <0>; compatible = "allwinner,sun4i-a10-apb0-clk"; reg = <0x01c20054 0x4>; clocks = <&ahb1>; clock-output-names = "apb1"; }; apb1_gates: clk@01c20068 { #clock-cells = <1>; compatible = "allwinner,sun6i-a31-apb1-gates-clk"; reg = <0x01c20068 0x4>; clocks = <&apb1>; clock-output-names = "apb1_codec", "apb1_digital_mic", "apb1_pio", "apb1_daudio0", "apb1_daudio1"; }; apb2_mux: apb2_mux@01c20058 { #clock-cells = <0>; compatible = "allwinner,sun4i-a10-apb1-mux-clk"; reg = <0x01c20058 0x4>; clocks = <&osc32k>, <&osc24M>, <&pll6>, <&pll6>; clock-output-names = "apb2_mux"; }; apb2: apb2@01c20058 { #clock-cells = <0>; compatible = "allwinner,sun6i-a31-apb2-div-clk"; reg = <0x01c20058 0x4>; clocks = <&apb2_mux>; clock-output-names = "apb2"; }; apb2_gates: clk@01c2006c { #clock-cells = <1>; compatible = "allwinner,sun6i-a31-apb2-gates-clk"; reg = <0x01c2006c 0x4>; clocks = <&apb2>; clock-output-names = "apb2_i2c0", "apb2_i2c1", "apb2_i2c2", "apb2_i2c3", "apb2_uart0", "apb2_uart1", "apb2_uart2", "apb2_uart3", "apb2_uart4", "apb2_uart5"; }; spi0_clk: clk@01c200a0 { #clock-cells = <0>; compatible = "allwinner,sun4i-a10-mod0-clk"; reg = <0x01c200a0 0x4>; clocks = <&osc24M>, <&pll6>; clock-output-names = "spi0"; }; spi1_clk: clk@01c200a4 { #clock-cells = <0>; compatible = "allwinner,sun4i-a10-mod0-clk"; reg = <0x01c200a4 0x4>; clocks = <&osc24M>, <&pll6>; clock-output-names = "spi1"; }; spi2_clk: clk@01c200a8 { #clock-cells = <0>; compatible = "allwinner,sun4i-a10-mod0-clk"; reg = <0x01c200a8 0x4>; clocks = <&osc24M>, <&pll6>; clock-output-names = "spi2"; }; spi3_clk: clk@01c200ac { #clock-cells = <0>; compatible = "allwinner,sun4i-a10-mod0-clk"; reg = <0x01c200ac 0x4>; clocks = <&osc24M>, <&pll6>; clock-output-names = "spi3"; }; }; soc@01c00000 { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; ranges; pio: pinctrl@01c20800 { compatible = "allwinner,sun6i-a31-pinctrl"; reg = <0x01c20800 0x400>; interrupts = <0 11 4>, <0 15 4>, <0 16 4>, <0 17 4>; clocks = <&apb1_gates 5>; gpio-controller; interrupt-controller; #address-cells = <1>; #size-cells = <0>; #gpio-cells = <3>; uart0_pins_a: uart0@0 { allwinner,pins = "PH20", "PH21"; allwinner,function = "uart0"; allwinner,drive = <0>; allwinner,pull = <0>; }; i2c0_pins_a: i2c0@0 { allwinner,pins = "PH14", "PH15"; allwinner,function = "i2c0"; allwinner,drive = <0>; allwinner,pull = <0>; }; i2c1_pins_a: i2c1@0 { allwinner,pins = "PH16", "PH17"; allwinner,function = "i2c1"; allwinner,drive = <0>; allwinner,pull = <0>; }; i2c2_pins_a: i2c2@0 { allwinner,pins = "PH18", "PH19"; allwinner,function = "i2c2"; allwinner,drive = <0>; allwinner,pull = <0>; }; }; ahb1_rst: reset@01c202c0 { #reset-cells = <1>; compatible = "allwinner,sun6i-a31-ahb1-reset"; reg = <0x01c202c0 0xc>; }; apb1_rst: reset@01c202d0 { #reset-cells = <1>; compatible = "allwinner,sun6i-a31-clock-reset"; reg = <0x01c202d0 0x4>; }; apb2_rst: reset@01c202d8 { #reset-cells = <1>; compatible = "allwinner,sun6i-a31-clock-reset"; reg = <0x01c202d8 0x4>; }; timer@01c20c00 { compatible = "allwinner,sun4i-timer"; reg = <0x01c20c00 0xa0>; interrupts = <0 18 4>, <0 19 4>, <0 20 4>, <0 21 4>, <0 22 4>; clocks = <&osc24M>; }; wdt1: watchdog@01c20ca0 { compatible = "allwinner,sun6i-a31-wdt"; reg = <0x01c20ca0 0x20>; }; uart0: serial@01c28000 { compatible = "snps,dw-apb-uart"; reg = <0x01c28000 0x400>; interrupts = <0 0 4>; reg-shift = <2>; reg-io-width = <4>; clocks = <&apb2_gates 16>; resets = <&apb2_rst 16>; status = "disabled"; }; uart1: serial@01c28400 { compatible = "snps,dw-apb-uart"; reg = <0x01c28400 0x400>; interrupts = <0 1 4>; reg-shift = <2>; reg-io-width = <4>; clocks = <&apb2_gates 17>; resets = <&apb2_rst 17>; status = "disabled"; }; uart2: serial@01c28800 { compatible = "snps,dw-apb-uart"; reg = <0x01c28800 0x400>; interrupts = <0 2 4>; reg-shift = <2>; reg-io-width = <4>; clocks = <&apb2_gates 18>; resets = <&apb2_rst 18>; status = "disabled"; }; uart3: serial@01c28c00 { compatible = "snps,dw-apb-uart"; reg = <0x01c28c00 0x400>; interrupts = <0 3 4>; reg-shift = <2>; reg-io-width = <4>; clocks = <&apb2_gates 19>; resets = <&apb2_rst 19>; status = "disabled"; }; uart4: serial@01c29000 { compatible = "snps,dw-apb-uart"; reg = <0x01c29000 0x400>; interrupts = <0 4 4>; reg-shift = <2>; reg-io-width = <4>; clocks = <&apb2_gates 20>; resets = <&apb2_rst 20>; status = "disabled"; }; uart5: serial@01c29400 { compatible = "snps,dw-apb-uart"; reg = <0x01c29400 0x400>; interrupts = <0 5 4>; reg-shift = <2>; reg-io-width = <4>; clocks = <&apb2_gates 21>; resets = <&apb2_rst 21>; status = "disabled"; }; i2c0: i2c@01c2ac00 { compatible = "allwinner,sun6i-a31-i2c"; reg = <0x01c2ac00 0x400>; interrupts = <0 6 4>; clocks = <&apb2_gates 0>; clock-frequency = <100000>; resets = <&apb2_rst 0>; status = "disabled"; }; i2c1: i2c@01c2b000 { compatible = "allwinner,sun6i-a31-i2c"; reg = <0x01c2b000 0x400>; interrupts = <0 7 4>; clocks = <&apb2_gates 1>; clock-frequency = <100000>; resets = <&apb2_rst 1>; status = "disabled"; }; i2c2: i2c@01c2b400 { compatible = "allwinner,sun6i-a31-i2c"; reg = <0x01c2b400 0x400>; interrupts = <0 8 4>; clocks = <&apb2_gates 2>; clock-frequency = <100000>; resets = <&apb2_rst 2>; status = "disabled"; }; i2c3: i2c@01c2b800 { compatible = "allwinner,sun6i-a31-i2c"; reg = <0x01c2b800 0x400>; interrupts = <0 9 4>; clocks = <&apb2_gates 3>; clock-frequency = <100000>; resets = <&apb2_rst 3>; status = "disabled"; }; spi0: spi@01c68000 { compatible = "allwinner,sun6i-a31-spi"; reg = <0x01c68000 0x1000>; interrupts = <0 65 4>; clocks = <&ahb1_gates 20>, <&spi0_clk>; clock-names = "ahb", "mod"; resets = <&ahb1_rst 20>; status = "disabled"; }; spi1: spi@01c69000 { compatible = "allwinner,sun6i-a31-spi"; reg = <0x01c69000 0x1000>; interrupts = <0 66 4>; clocks = <&ahb1_gates 21>, <&spi1_clk>; clock-names = "ahb", "mod"; resets = <&ahb1_rst 21>; status = "disabled"; }; spi2: spi@01c6a000 { compatible = "allwinner,sun6i-a31-spi"; reg = <0x01c6a000 0x1000>; interrupts = <0 67 4>; clocks = <&ahb1_gates 22>, <&spi2_clk>; clock-names = "ahb", "mod"; resets = <&ahb1_rst 22>; status = "disabled"; }; spi3: spi@01c6b000 { compatible = "allwinner,sun6i-a31-spi"; reg = <0x01c6b000 0x1000>; interrupts = <0 68 4>; clocks = <&ahb1_gates 23>, <&spi3_clk>; clock-names = "ahb", "mod"; resets = <&ahb1_rst 23>; status = "disabled"; }; gic: interrupt-controller@01c81000 { compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic"; reg = <0x01c81000 0x1000>, <0x01c82000 0x1000>, <0x01c84000 0x2000>, <0x01c86000 0x2000>; interrupt-controller; #interrupt-cells = <3>; interrupts = <1 9 0xf04>; }; cpucfg@01f01c00 { compatible = "allwinner,sun6i-a31-cpuconfig"; reg = <0x01f01c00 0x300>; }; prcm@01f01c00 { compatible = "allwinner,sun6i-a31-prcm"; reg = <0x01f01400 0x200>; }; }; };