/* * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/ * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. * Based on "omap4.dtsi" */ #include #include #include "skeleton.dtsi" #define MAX_SOURCES 400 / { #address-cells = <1>; #size-cells = <1>; compatible = "ti,dra7xx"; interrupt-parent = <&crossbar_mpu>; aliases { i2c0 = &i2c1; i2c1 = &i2c2; i2c2 = &i2c3; i2c3 = &i2c4; i2c4 = &i2c5; serial0 = &uart1; serial1 = &uart2; serial2 = &uart3; serial3 = &uart4; serial4 = &uart5; serial5 = &uart6; serial6 = &uart7; serial7 = &uart8; serial8 = &uart9; serial9 = &uart10; ethernet0 = &cpsw_emac0; ethernet1 = &cpsw_emac1; d_can0 = &dcan1; d_can1 = &dcan2; }; timer { compatible = "arm,armv7-timer"; interrupts = , , , ; interrupt-parent = <&gic>; }; gic: interrupt-controller@48211000 { compatible = "arm,cortex-a15-gic"; interrupt-controller; #interrupt-cells = <3>; reg = <0x48211000 0x1000>, <0x48212000 0x1000>, <0x48214000 0x2000>, <0x48216000 0x2000>; interrupts = ; interrupt-parent = <&gic>; }; wakeupgen: interrupt-controller@48281000 { compatible = "ti,omap5-wugen-mpu", "ti,omap4-wugen-mpu"; interrupt-controller; #interrupt-cells = <3>; reg = <0x48281000 0x1000>; interrupt-parent = <&gic>; }; /* * The soc node represents the soc top level view. It is used for IPs * that are not memory mapped in the MPU view or for the MPU itself. */ soc { compatible = "ti,omap-infra"; mpu { compatible = "ti,omap5-mpu"; ti,hwmods = "mpu"; }; }; /* * XXX: Use a flat representation of the SOC interconnect. * The real OMAP interconnect network is quite complex. * Since it will not bring real advantage to represent that in DT for * the moment, just use a fake OCP bus entry to represent the whole bus * hierarchy. */ ocp { compatible = "ti,dra7-l3-noc", "simple-bus"; #address-cells = <1>; #size-cells = <1>; ranges; ti,hwmods = "l3_main_1", "l3_main_2"; reg = <0x44000000 0x1000000>, <0x45000000 0x1000>; interrupts-extended = <&crossbar_mpu GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, <&wakeupgen GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; prm: prm@4ae06000 { compatible = "ti,dra7-prm"; reg = <0x4ae06000 0x3000>; interrupts = ; prm_clocks: clocks { #address-cells = <1>; #size-cells = <0>; }; prm_clockdomains: clockdomains { }; }; axi@0 { compatible = "simple-bus"; #size-cells = <1>; #address-cells = <1>; ranges = <0x51000000 0x51000000 0x3000 0x0 0x20000000 0x10000000>; pcie@51000000 { compatible = "ti,dra7-pcie"; reg = <0x51000000 0x2000>, <0x51002000 0x14c>, <0x1000 0x2000>; reg-names = "rc_dbics", "ti_conf", "config"; interrupts = <0 232 0x4>, <0 233 0x4>; #address-cells = <3>; #size-cells = <2>; device_type = "pci"; ranges = <0x81000000 0 0 0x03000 0 0x00010000 0x82000000 0 0x20013000 0x13000 0 0xffed000>; #interrupt-cells = <1>; num-lanes = <1>; ti,hwmods = "pcie1"; phys = <&pcie1_phy>; phy-names = "pcie-phy0"; interrupt-map-mask = <0 0 0 7>; interrupt-map = <0 0 0 1 &pcie1_intc 1>, <0 0 0 2 &pcie1_intc 2>, <0 0 0 3 &pcie1_intc 3>, <0 0 0 4 &pcie1_intc 4>; pcie1_intc: interrupt-controller { interrupt-controller; #address-cells = <0>; #interrupt-cells = <1>; }; }; }; axi@1 { compatible = "simple-bus"; #size-cells = <1>; #address-cells = <1>; ranges = <0x51800000 0x51800000 0x3000 0x0 0x30000000 0x10000000>; status = "disabled"; pcie@51000000 { compatible = "ti,dra7-pcie"; reg = <0x51800000 0x2000>, <0x51802000 0x14c>, <0x1000 0x2000>; reg-names = "rc_dbics", "ti_conf", "config"; interrupts = <0 355 0x4>, <0 356 0x4>; #address-cells = <3>; #size-cells = <2>; device_type = "pci"; ranges = <0x81000000 0 0 0x03000 0 0x00010000 0x82000000 0 0x30013000 0x13000 0 0xffed000>; #interrupt-cells = <1>; num-lanes = <1>; ti,hwmods = "pcie2"; phys = <&pcie2_phy>; phy-names = "pcie-phy0"; interrupt-map-mask = <0 0 0 7>; interrupt-map = <0 0 0 1 &pcie2_intc 1>, <0 0 0 2 &pcie2_intc 2>, <0 0 0 3 &pcie2_intc 3>, <0 0 0 4 &pcie2_intc 4>; pcie2_intc: interrupt-controller { interrupt-controller; #address-cells = <0>; #interrupt-cells = <1>; }; }; }; cm_core_aon: cm_core_aon@4a005000 { compatible = "ti,dra7-cm-core-aon"; reg = <0x4a005000 0x2000>; cm_core_aon_clocks: clocks { #address-cells = <1>; #size-cells = <0>; }; cm_core_aon_clockdomains: clockdomains { }; }; cm_core: cm_core@4a008000 { compatible = "ti,dra7-cm-core"; reg = <0x4a008000 0x3000>; cm_core_clocks: clocks { #address-cells = <1>; #size-cells = <0>; }; cm_core_clockdomains: clockdomains { }; }; counter32k: counter@4ae04000 { compatible = "ti,omap-counter32k"; reg = <0x4ae04000 0x40>; ti,hwmods = "counter_32k"; }; dra7_ctrl_core: ctrl_core@4a002000 { compatible = "syscon"; reg = <0x4a002000 0x6d0>; }; dra7_ctrl_general: tisyscon@4a002e00 { compatible = "syscon"; reg = <0x4a002e00 0x7c>; }; pbias_regulator: pbias_regulator { compatible = "ti,pbias-omap"; reg = <0 0x4>; syscon = <&dra7_ctrl_general>; pbias_mmc_reg: pbias_mmc_omap5 { regulator-name = "pbias_mmc_omap5"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3000000>; }; }; dra7_pmx_core: pinmux@4a003400 { compatible = "ti,dra7-padconf", "pinctrl-single"; reg = <0x4a003400 0x0464>; #address-cells = <1>; #size-cells = <0>; #interrupt-cells = <1>; interrupt-controller; pinctrl-single,register-width = <32>; pinctrl-single,function-mask = <0x3fffffff>; }; sdma: dma-controller@4a056000 { compatible = "ti,omap4430-sdma"; reg = <0x4a056000 0x1000>; interrupts = , , , ; #dma-cells = <1>; dma-channels = <32>; dma-requests = <127>; }; gpio1: gpio@4ae10000 { compatible = "ti,omap4-gpio"; reg = <0x4ae10000 0x200>; interrupts = ; ti,hwmods = "gpio1"; gpio-controller; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; }; gpio2: gpio@48055000 { compatible = "ti,omap4-gpio"; reg = <0x48055000 0x200>; interrupts = ; ti,hwmods = "gpio2"; gpio-controller; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; }; gpio3: gpio@48057000 { compatible = "ti,omap4-gpio"; reg = <0x48057000 0x200>; interrupts = ; ti,hwmods = "gpio3"; gpio-controller; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; }; gpio4: gpio@48059000 { compatible = "ti,omap4-gpio"; reg = <0x48059000 0x200>; interrupts = ; ti,hwmods = "gpio4"; gpio-controller; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; }; gpio5: gpio@4805b000 { compatible = "ti,omap4-gpio"; reg = <0x4805b000 0x200>; interrupts = ; ti,hwmods = "gpio5"; gpio-controller; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; }; gpio6: gpio@4805d000 { compatible = "ti,omap4-gpio"; reg = <0x4805d000 0x200>; interrupts = ; ti,hwmods = "gpio6"; gpio-controller; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; }; gpio7: gpio@48051000 { compatible = "ti,omap4-gpio"; reg = <0x48051000 0x200>; interrupts = ; ti,hwmods = "gpio7"; gpio-controller; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; }; gpio8: gpio@48053000 { compatible = "ti,omap4-gpio"; reg = <0x48053000 0x200>; interrupts = ; ti,hwmods = "gpio8"; gpio-controller; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; }; uart1: serial@4806a000 { compatible = "ti,omap4-uart"; reg = <0x4806a000 0x100>; interrupts-extended = <&crossbar_mpu GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "uart1"; clock-frequency = <48000000>; status = "disabled"; dmas = <&sdma 49>, <&sdma 50>; dma-names = "tx", "rx"; }; uart2: serial@4806c000 { compatible = "ti,omap4-uart"; reg = <0x4806c000 0x100>; interrupts = ; ti,hwmods = "uart2"; clock-frequency = <48000000>; status = "disabled"; dmas = <&sdma 51>, <&sdma 52>; dma-names = "tx", "rx"; }; uart3: serial@48020000 { compatible = "ti,omap4-uart"; reg = <0x48020000 0x100>; interrupts = ; ti,hwmods = "uart3"; clock-frequency = <48000000>; status = "disabled"; dmas = <&sdma 53>, <&sdma 54>; dma-names = "tx", "rx"; }; uart4: serial@4806e000 { compatible = "ti,omap4-uart"; reg = <0x4806e000 0x100>; interrupts = ; ti,hwmods = "uart4"; clock-frequency = <48000000>; status = "disabled"; dmas = <&sdma 55>, <&sdma 56>; dma-names = "tx", "rx"; }; uart5: serial@48066000 { compatible = "ti,omap4-uart"; reg = <0x48066000 0x100>; interrupts = ; ti,hwmods = "uart5"; clock-frequency = <48000000>; status = "disabled"; dmas = <&sdma 63>, <&sdma 64>; dma-names = "tx", "rx"; }; uart6: serial@48068000 { compatible = "ti,omap4-uart"; reg = <0x48068000 0x100>; interrupts = ; ti,hwmods = "uart6"; clock-frequency = <48000000>; status = "disabled"; dmas = <&sdma 79>, <&sdma 80>; dma-names = "tx", "rx"; }; uart7: serial@48420000 { compatible = "ti,omap4-uart"; reg = <0x48420000 0x100>; interrupts = ; ti,hwmods = "uart7"; clock-frequency = <48000000>; status = "disabled"; }; uart8: serial@48422000 { compatible = "ti,omap4-uart"; reg = <0x48422000 0x100>; interrupts = ; ti,hwmods = "uart8"; clock-frequency = <48000000>; status = "disabled"; }; uart9: serial@48424000 { compatible = "ti,omap4-uart"; reg = <0x48424000 0x100>; interrupts = ; ti,hwmods = "uart9"; clock-frequency = <48000000>; status = "disabled"; }; uart10: serial@4ae2b000 { compatible = "ti,omap4-uart"; reg = <0x4ae2b000 0x100>; interrupts = ; ti,hwmods = "uart10"; clock-frequency = <48000000>; status = "disabled"; }; mailbox1: mailbox@4a0f4000 { compatible = "ti,omap4-mailbox"; reg = <0x4a0f4000 0x200>; interrupts = , , ; ti,hwmods = "mailbox1"; #mbox-cells = <1>; ti,mbox-num-users = <3>; ti,mbox-num-fifos = <8>; status = "disabled"; }; mailbox2: mailbox@4883a000 { compatible = "ti,omap4-mailbox"; reg = <0x4883a000 0x200>; interrupts = , , , ; ti,hwmods = "mailbox2"; #mbox-cells = <1>; ti,mbox-num-users = <4>; ti,mbox-num-fifos = <12>; status = "disabled"; }; mailbox3: mailbox@4883c000 { compatible = "ti,omap4-mailbox"; reg = <0x4883c000 0x200>; interrupts = , , , ; ti,hwmods = "mailbox3"; #mbox-cells = <1>; ti,mbox-num-users = <4>; ti,mbox-num-fifos = <12>; status = "disabled"; }; mailbox4: mailbox@4883e000 { compatible = "ti,omap4-mailbox"; reg = <0x4883e000 0x200>; interrupts = , , , ; ti,hwmods = "mailbox4"; #mbox-cells = <1>; ti,mbox-num-users = <4>; ti,mbox-num-fifos = <12>; status = "disabled"; }; mailbox5: mailbox@48840000 { compatible = "ti,omap4-mailbox"; reg = <0x48840000 0x200>; interrupts = , , , ; ti,hwmods = "mailbox5"; #mbox-cells = <1>; ti,mbox-num-users = <4>; ti,mbox-num-fifos = <12>; status = "disabled"; }; mailbox6: mailbox@48842000 { compatible = "ti,omap4-mailbox"; reg = <0x48842000 0x200>; interrupts = , , , ; ti,hwmods = "mailbox6"; #mbox-cells = <1>; ti,mbox-num-users = <4>; ti,mbox-num-fifos = <12>; status = "disabled"; }; mailbox7: mailbox@48844000 { compatible = "ti,omap4-mailbox"; reg = <0x48844000 0x200>; interrupts = , , , ; ti,hwmods = "mailbox7"; #mbox-cells = <1>; ti,mbox-num-users = <4>; ti,mbox-num-fifos = <12>; status = "disabled"; }; mailbox8: mailbox@48846000 { compatible = "ti,omap4-mailbox"; reg = <0x48846000 0x200>; interrupts = , , , ; ti,hwmods = "mailbox8"; #mbox-cells = <1>; ti,mbox-num-users = <4>; ti,mbox-num-fifos = <12>; status = "disabled"; }; mailbox9: mailbox@4885e000 { compatible = "ti,omap4-mailbox"; reg = <0x4885e000 0x200>; interrupts = , , , ; ti,hwmods = "mailbox9"; #mbox-cells = <1>; ti,mbox-num-users = <4>; ti,mbox-num-fifos = <12>; status = "disabled"; }; mailbox10: mailbox@48860000 { compatible = "ti,omap4-mailbox"; reg = <0x48860000 0x200>; interrupts = , , , ; ti,hwmods = "mailbox10"; #mbox-cells = <1>; ti,mbox-num-users = <4>; ti,mbox-num-fifos = <12>; status = "disabled"; }; mailbox11: mailbox@48862000 { compatible = "ti,omap4-mailbox"; reg = <0x48862000 0x200>; interrupts = , , , ; ti,hwmods = "mailbox11"; #mbox-cells = <1>; ti,mbox-num-users = <4>; ti,mbox-num-fifos = <12>; status = "disabled"; }; mailbox12: mailbox@48864000 { compatible = "ti,omap4-mailbox"; reg = <0x48864000 0x200>; interrupts = , , , ; ti,hwmods = "mailbox12"; #mbox-cells = <1>; ti,mbox-num-users = <4>; ti,mbox-num-fifos = <12>; status = "disabled"; }; mailbox13: mailbox@48802000 { compatible = "ti,omap4-mailbox"; reg = <0x48802000 0x200>; interrupts = , , , ; ti,hwmods = "mailbox13"; #mbox-cells = <1>; ti,mbox-num-users = <4>; ti,mbox-num-fifos = <12>; status = "disabled"; }; timer1: timer@4ae18000 { compatible = "ti,omap5430-timer"; reg = <0x4ae18000 0x80>; interrupts = ; ti,hwmods = "timer1"; ti,timer-alwon; }; timer2: timer@48032000 { compatible = "ti,omap5430-timer"; reg = <0x48032000 0x80>; interrupts = ; ti,hwmods = "timer2"; }; timer3: timer@48034000 { compatible = "ti,omap5430-timer"; reg = <0x48034000 0x80>; interrupts = ; ti,hwmods = "timer3"; }; timer4: timer@48036000 { compatible = "ti,omap5430-timer"; reg = <0x48036000 0x80>; interrupts = ; ti,hwmods = "timer4"; }; timer5: timer@48820000 { compatible = "ti,omap5430-timer"; reg = <0x48820000 0x80>; interrupts = ; ti,hwmods = "timer5"; ti,timer-dsp; }; timer6: timer@48822000 { compatible = "ti,omap5430-timer"; reg = <0x48822000 0x80>; interrupts = ; ti,hwmods = "timer6"; ti,timer-dsp; ti,timer-pwm; }; timer7: timer@48824000 { compatible = "ti,omap5430-timer"; reg = <0x48824000 0x80>; interrupts = ; ti,hwmods = "timer7"; ti,timer-dsp; }; timer8: timer@48826000 { compatible = "ti,omap5430-timer"; reg = <0x48826000 0x80>; interrupts = ; ti,hwmods = "timer8"; ti,timer-dsp; ti,timer-pwm; }; timer9: timer@4803e000 { compatible = "ti,omap5430-timer"; reg = <0x4803e000 0x80>; interrupts = ; ti,hwmods = "timer9"; }; timer10: timer@48086000 { compatible = "ti,omap5430-timer"; reg = <0x48086000 0x80>; interrupts = ; ti,hwmods = "timer10"; }; timer11: timer@48088000 { compatible = "ti,omap5430-timer"; reg = <0x48088000 0x80>; interrupts = ; ti,hwmods = "timer11"; ti,timer-pwm; }; timer13: timer@48828000 { compatible = "ti,omap5430-timer"; reg = <0x48828000 0x80>; interrupts = ; ti,hwmods = "timer13"; status = "disabled"; }; timer14: timer@4882a000 { compatible = "ti,omap5430-timer"; reg = <0x4882a000 0x80>; interrupts = ; ti,hwmods = "timer14"; status = "disabled"; }; timer15: timer@4882c000 { compatible = "ti,omap5430-timer"; reg = <0x4882c000 0x80>; interrupts = ; ti,hwmods = "timer15"; status = "disabled"; }; timer16: timer@4882e000 { compatible = "ti,omap5430-timer"; reg = <0x4882e000 0x80>; interrupts = ; ti,hwmods = "timer16"; status = "disabled"; }; wdt2: wdt@4ae14000 { compatible = "ti,omap3-wdt"; reg = <0x4ae14000 0x80>; interrupts = ; ti,hwmods = "wd_timer2"; }; hwspinlock: spinlock@4a0f6000 { compatible = "ti,omap4-hwspinlock"; reg = <0x4a0f6000 0x1000>; ti,hwmods = "spinlock"; #hwlock-cells = <1>; }; dmm@4e000000 { compatible = "ti,omap5-dmm"; reg = <0x4e000000 0x800>; interrupts = ; ti,hwmods = "dmm"; }; i2c1: i2c@48070000 { compatible = "ti,omap4-i2c"; reg = <0x48070000 0x100>; interrupts = ; #address-cells = <1>; #size-cells = <0>; ti,hwmods = "i2c1"; status = "disabled"; }; i2c2: i2c@48072000 { compatible = "ti,omap4-i2c"; reg = <0x48072000 0x100>; interrupts = ; #address-cells = <1>; #size-cells = <0>; ti,hwmods = "i2c2"; status = "disabled"; }; i2c3: i2c@48060000 { compatible = "ti,omap4-i2c"; reg = <0x48060000 0x100>; interrupts = ; #address-cells = <1>; #size-cells = <0>; ti,hwmods = "i2c3"; status = "disabled"; }; i2c4: i2c@4807a000 { compatible = "ti,omap4-i2c"; reg = <0x4807a000 0x100>; interrupts = ; #address-cells = <1>; #size-cells = <0>; ti,hwmods = "i2c4"; status = "disabled"; }; i2c5: i2c@4807c000 { compatible = "ti,omap4-i2c"; reg = <0x4807c000 0x100>; interrupts = ; #address-cells = <1>; #size-cells = <0>; ti,hwmods = "i2c5"; status = "disabled"; }; mmc1: mmc@4809c000 { compatible = "ti,omap4-hsmmc"; reg = <0x4809c000 0x400>; interrupts = ; ti,hwmods = "mmc1"; ti,dual-volt; ti,needs-special-reset; dmas = <&sdma 61>, <&sdma 62>; dma-names = "tx", "rx"; status = "disabled"; pbias-supply = <&pbias_mmc_reg>; }; mmc2: mmc@480b4000 { compatible = "ti,omap4-hsmmc"; reg = <0x480b4000 0x400>; interrupts = ; ti,hwmods = "mmc2"; ti,needs-special-reset; dmas = <&sdma 47>, <&sdma 48>; dma-names = "tx", "rx"; status = "disabled"; }; mmc3: mmc@480ad000 { compatible = "ti,omap4-hsmmc"; reg = <0x480ad000 0x400>; interrupts = ; ti,hwmods = "mmc3"; ti,needs-special-reset; dmas = <&sdma 77>, <&sdma 78>; dma-names = "tx", "rx"; status = "disabled"; }; mmc4: mmc@480d1000 { compatible = "ti,omap4-hsmmc"; reg = <0x480d1000 0x400>; interrupts = ; ti,hwmods = "mmc4"; ti,needs-special-reset; dmas = <&sdma 57>, <&sdma 58>; dma-names = "tx", "rx"; status = "disabled"; }; abb_mpu: regulator-abb-mpu { compatible = "ti,abb-v3"; regulator-name = "abb_mpu"; #address-cells = <0>; #size-cells = <0>; clocks = <&sys_clkin1>; ti,settling-time = <50>; ti,clock-cycles = <16>; reg = <0x4ae07ddc 0x4>, <0x4ae07de0 0x4>, <0x4ae06014 0x4>, <0x4a003b20 0x8>, <0x4ae0c158 0x4>; reg-names = "setup-address", "control-address", "int-address", "efuse-address", "ldo-address"; ti,tranxdone-status-mask = <0x80>; /* LDOVBBMPU_FBB_MUX_CTRL */ ti,ldovbb-override-mask = <0x400>; /* LDOVBBMPU_FBB_VSET_OUT */ ti,ldovbb-vset-mask = <0x1F>; /* * NOTE: only FBB mode used but actual vset will * determine final biasing */ ti,abb_info = < /*uV ABB efuse rbb_m fbb_m vset_m*/ 1060000 0 0x0 0 0x02000000 0x01F00000 1160000 0 0x4 0 0x02000000 0x01F00000 1210000 0 0x8 0 0x02000000 0x01F00000 >; }; abb_ivahd: regulator-abb-ivahd { compatible = "ti,abb-v3"; regulator-name = "abb_ivahd"; #address-cells = <0>; #size-cells = <0>; clocks = <&sys_clkin1>; ti,settling-time = <50>; ti,clock-cycles = <16>; reg = <0x4ae07e34 0x4>, <0x4ae07e24 0x4>, <0x4ae06010 0x4>, <0x4a0025cc 0x8>, <0x4a002470 0x4>; reg-names = "setup-address", "control-address", "int-address", "efuse-address", "ldo-address"; ti,tranxdone-status-mask = <0x40000000>; /* LDOVBBIVA_FBB_MUX_CTRL */ ti,ldovbb-override-mask = <0x400>; /* LDOVBBIVA_FBB_VSET_OUT */ ti,ldovbb-vset-mask = <0x1F>; /* * NOTE: only FBB mode used but actual vset will * determine final biasing */ ti,abb_info = < /*uV ABB efuse rbb_m fbb_m vset_m*/ 1055000 0 0x0 0 0x02000000 0x01F00000 1150000 0 0x4 0 0x02000000 0x01F00000 1250000 0 0x8 0 0x02000000 0x01F00000 >; }; abb_dspeve: regulator-abb-dspeve { compatible = "ti,abb-v3"; regulator-name = "abb_dspeve"; #address-cells = <0>; #size-cells = <0>; clocks = <&sys_clkin1>; ti,settling-time = <50>; ti,clock-cycles = <16>; reg = <0x4ae07e30 0x4>, <0x4ae07e20 0x4>, <0x4ae06010 0x4>, <0x4a0025e0 0x8>, <0x4a00246c 0x4>; reg-names = "setup-address", "control-address", "int-address", "efuse-address", "ldo-address"; ti,tranxdone-status-mask = <0x20000000>; /* LDOVBBDSPEVE_FBB_MUX_CTRL */ ti,ldovbb-override-mask = <0x400>; /* LDOVBBDSPEVE_FBB_VSET_OUT */ ti,ldovbb-vset-mask = <0x1F>; /* * NOTE: only FBB mode used but actual vset will * determine final biasing */ ti,abb_info = < /*uV ABB efuse rbb_m fbb_m vset_m*/ 1055000 0 0x0 0 0x02000000 0x01F00000 1150000 0 0x4 0 0x02000000 0x01F00000 1250000 0 0x8 0 0x02000000 0x01F00000 >; }; abb_gpu: regulator-abb-gpu { compatible = "ti,abb-v3"; regulator-name = "abb_gpu"; #address-cells = <0>; #size-cells = <0>; clocks = <&sys_clkin1>; ti,settling-time = <50>; ti,clock-cycles = <16>; reg = <0x4ae07de4 0x4>, <0x4ae07de8 0x4>, <0x4ae06010 0x4>, <0x4a003b08 0x8>, <0x4ae0c154 0x4>; reg-names = "setup-address", "control-address", "int-address", "efuse-address", "ldo-address"; ti,tranxdone-status-mask = <0x10000000>; /* LDOVBBGPU_FBB_MUX_CTRL */ ti,ldovbb-override-mask = <0x400>; /* LDOVBBGPU_FBB_VSET_OUT */ ti,ldovbb-vset-mask = <0x1F>; /* * NOTE: only FBB mode used but actual vset will * determine final biasing */ ti,abb_info = < /*uV ABB efuse rbb_m fbb_m vset_m*/ 1090000 0 0x0 0 0x02000000 0x01F00000 1210000 0 0x4 0 0x02000000 0x01F00000 1280000 0 0x8 0 0x02000000 0x01F00000 >; }; mcspi1: spi@48098000 { compatible = "ti,omap4-mcspi"; reg = <0x48098000 0x200>; interrupts = ; #address-cells = <1>; #size-cells = <0>; ti,hwmods = "mcspi1"; ti,spi-num-cs = <4>; dmas = <&sdma 35>, <&sdma 36>, <&sdma 37>, <&sdma 38>, <&sdma 39>, <&sdma 40>, <&sdma 41>, <&sdma 42>; dma-names = "tx0", "rx0", "tx1", "rx1", "tx2", "rx2", "tx3", "rx3"; status = "disabled"; }; mcspi2: spi@4809a000 { compatible = "ti,omap4-mcspi"; reg = <0x4809a000 0x200>; interrupts = ; #address-cells = <1>; #size-cells = <0>; ti,hwmods = "mcspi2"; ti,spi-num-cs = <2>; dmas = <&sdma 43>, <&sdma 44>, <&sdma 45>, <&sdma 46>; dma-names = "tx0", "rx0", "tx1", "rx1"; status = "disabled"; }; mcspi3: spi@480b8000 { compatible = "ti,omap4-mcspi"; reg = <0x480b8000 0x200>; interrupts = ; #address-cells = <1>; #size-cells = <0>; ti,hwmods = "mcspi3"; ti,spi-num-cs = <2>; dmas = <&sdma 15>, <&sdma 16>; dma-names = "tx0", "rx0"; status = "disabled"; }; mcspi4: spi@480ba000 { compatible = "ti,omap4-mcspi"; reg = <0x480ba000 0x200>; interrupts = ; #address-cells = <1>; #size-cells = <0>; ti,hwmods = "mcspi4"; ti,spi-num-cs = <1>; dmas = <&sdma 70>, <&sdma 71>; dma-names = "tx0", "rx0"; status = "disabled"; }; qspi: qspi@4b300000 { compatible = "ti,dra7xxx-qspi"; reg = <0x4b300000 0x100>; reg-names = "qspi_base"; #address-cells = <1>; #size-cells = <0>; ti,hwmods = "qspi"; clocks = <&qspi_gfclk_div>; clock-names = "fck"; num-cs = <4>; interrupts = ; status = "disabled"; }; omap_control_sata: control-phy@4a002374 { compatible = "ti,control-phy-pipe3"; reg = <0x4a002374 0x4>; reg-names = "power"; clocks = <&sys_clkin1>; clock-names = "sysclk"; }; /* OCP2SCP3 */ ocp2scp@4a090000 { compatible = "ti,omap-ocp2scp"; #address-cells = <1>; #size-cells = <1>; ranges; reg = <0x4a090000 0x20>; ti,hwmods = "ocp2scp3"; sata_phy: phy@4A096000 { compatible = "ti,phy-pipe3-sata"; reg = <0x4A096000 0x80>, /* phy_rx */ <0x4A096400 0x64>, /* phy_tx */ <0x4A096800 0x40>; /* pll_ctrl */ reg-names = "phy_rx", "phy_tx", "pll_ctrl"; ctrl-module = <&omap_control_sata>; clocks = <&sys_clkin1>, <&sata_ref_clk>; clock-names = "sysclk", "refclk"; #phy-cells = <0>; }; pcie1_phy: pciephy@4a094000 { compatible = "ti,phy-pipe3-pcie"; reg = <0x4a094000 0x80>, /* phy_rx */ <0x4a094400 0x64>; /* phy_tx */ reg-names = "phy_rx", "phy_tx"; ctrl-module = <&omap_control_pcie1phy>; clocks = <&dpll_pcie_ref_ck>, <&dpll_pcie_ref_m2ldo_ck>, <&optfclk_pciephy1_32khz>, <&optfclk_pciephy1_clk>, <&optfclk_pciephy1_div_clk>, <&optfclk_pciephy_div>; clock-names = "dpll_ref", "dpll_ref_m2", "wkupclk", "refclk", "div-clk", "phy-div"; #phy-cells = <0>; }; pcie2_phy: pciephy@4a095000 { compatible = "ti,phy-pipe3-pcie"; reg = <0x4a095000 0x80>, /* phy_rx */ <0x4a095400 0x64>; /* phy_tx */ reg-names = "phy_rx", "phy_tx"; ctrl-module = <&omap_control_pcie2phy>; clocks = <&dpll_pcie_ref_ck>, <&dpll_pcie_ref_m2ldo_ck>, <&optfclk_pciephy2_32khz>, <&optfclk_pciephy2_clk>, <&optfclk_pciephy2_div_clk>, <&optfclk_pciephy_div>; clock-names = "dpll_ref", "dpll_ref_m2", "wkupclk", "refclk", "div-clk", "phy-div"; #phy-cells = <0>; status = "disabled"; }; }; sata: sata@4a141100 { compatible = "snps,dwc-ahci"; reg = <0x4a140000 0x1100>, <0x4a141100 0x7>; interrupts = ; phys = <&sata_phy>; phy-names = "sata-phy"; clocks = <&sata_ref_clk>; ti,hwmods = "sata"; }; omap_control_pcie1phy: control-phy@0x4a003c40 { compatible = "ti,control-phy-pcie"; reg = <0x4a003c40 0x4>, <0x4a003c14 0x4>, <0x4a003c34 0x4>; reg-names = "power", "control_sma", "pcie_pcs"; clocks = <&sys_clkin1>; clock-names = "sysclk"; }; omap_control_pcie2phy: control-pcie@0x4a003c44 { compatible = "ti,control-phy-pcie"; reg = <0x4a003c44 0x4>, <0x4a003c14 0x4>, <0x4a003c34 0x4>; reg-names = "power", "control_sma", "pcie_pcs"; clocks = <&sys_clkin1>; clock-names = "sysclk"; status = "disabled"; }; rtc@48838000 { compatible = "ti,am3352-rtc"; reg = <0x48838000 0x100>; interrupts = , ; ti,hwmods = "rtcss"; clocks = <&sys_32k_ck>; }; omap_control_usb2phy1: control-phy@4a002300 { compatible = "ti,control-phy-usb2"; reg = <0x4a002300 0x4>; reg-names = "power"; }; omap_control_usb3phy1: control-phy@4a002370 { compatible = "ti,control-phy-pipe3"; reg = <0x4a002370 0x4>; reg-names = "power"; }; omap_control_usb2phy2: control-phy@0x4a002e74 { compatible = "ti,control-phy-usb2-dra7"; reg = <0x4a002e74 0x4>; reg-names = "power"; }; /* OCP2SCP1 */ ocp2scp@4a080000 { compatible = "ti,omap-ocp2scp"; #address-cells = <1>; #size-cells = <1>; ranges; reg = <0x4a080000 0x20>; ti,hwmods = "ocp2scp1"; usb2_phy1: phy@4a084000 { compatible = "ti,omap-usb2"; reg = <0x4a084000 0x400>; ctrl-module = <&omap_control_usb2phy1>; clocks = <&usb_phy1_always_on_clk32k>, <&usb_otg_ss1_refclk960m>; clock-names = "wkupclk", "refclk"; #phy-cells = <0>; }; usb2_phy2: phy@4a085000 { compatible = "ti,omap-usb2"; reg = <0x4a085000 0x400>; ctrl-module = <&omap_control_usb2phy2>; clocks = <&usb_phy2_always_on_clk32k>, <&usb_otg_ss2_refclk960m>; clock-names = "wkupclk", "refclk"; #phy-cells = <0>; }; usb3_phy1: phy@4a084400 { compatible = "ti,omap-usb3"; reg = <0x4a084400 0x80>, <0x4a084800 0x64>, <0x4a084c00 0x40>; reg-names = "phy_rx", "phy_tx", "pll_ctrl"; ctrl-module = <&omap_control_usb3phy1>; clocks = <&usb_phy3_always_on_clk32k>, <&sys_clkin1>, <&usb_otg_ss1_refclk960m>; clock-names = "wkupclk", "sysclk", "refclk"; #phy-cells = <0>; }; }; omap_dwc3_1: omap_dwc3_1@48880000 { compatible = "ti,dwc3"; ti,hwmods = "usb_otg_ss1"; reg = <0x48880000 0x10000>; interrupts = ; #address-cells = <1>; #size-cells = <1>; utmi-mode = <2>; ranges; usb1: usb@48890000 { compatible = "snps,dwc3"; reg = <0x48890000 0x17000>; interrupts = ; phys = <&usb2_phy1>, <&usb3_phy1>; phy-names = "usb2-phy", "usb3-phy"; tx-fifo-resize; maximum-speed = "super-speed"; dr_mode = "otg"; snps,dis_u3_susphy_quirk; snps,dis_u2_susphy_quirk; }; }; omap_dwc3_2: omap_dwc3_2@488c0000 { compatible = "ti,dwc3"; ti,hwmods = "usb_otg_ss2"; reg = <0x488c0000 0x10000>; interrupts = ; #address-cells = <1>; #size-cells = <1>; utmi-mode = <2>; ranges; usb2: usb@488d0000 { compatible = "snps,dwc3"; reg = <0x488d0000 0x17000>; interrupts = ; phys = <&usb2_phy2>; phy-names = "usb2-phy"; tx-fifo-resize; maximum-speed = "high-speed"; dr_mode = "otg"; snps,dis_u3_susphy_quirk; snps,dis_u2_susphy_quirk; }; }; /* IRQ for DWC3_3 and DWC3_4 need IRQ crossbar */ omap_dwc3_3: omap_dwc3_3@48900000 { compatible = "ti,dwc3"; ti,hwmods = "usb_otg_ss3"; reg = <0x48900000 0x10000>; interrupts = ; #address-cells = <1>; #size-cells = <1>; utmi-mode = <2>; ranges; status = "disabled"; usb3: usb@48910000 { compatible = "snps,dwc3"; reg = <0x48910000 0x17000>; interrupts = ; tx-fifo-resize; maximum-speed = "high-speed"; dr_mode = "otg"; snps,dis_u3_susphy_quirk; snps,dis_u2_susphy_quirk; }; }; elm: elm@48078000 { compatible = "ti,am3352-elm"; reg = <0x48078000 0xfc0>; /* device IO registers */ interrupts = ; ti,hwmods = "elm"; status = "disabled"; }; gpmc: gpmc@50000000 { compatible = "ti,am3352-gpmc"; ti,hwmods = "gpmc"; reg = <0x50000000 0x37c>; /* device IO registers */ interrupts = ; gpmc,num-cs = <8>; gpmc,num-waitpins = <2>; #address-cells = <2>; #size-cells = <1>; status = "disabled"; }; atl: atl@4843c000 { compatible = "ti,dra7-atl"; reg = <0x4843c000 0x3ff>; ti,hwmods = "atl"; ti,provided-clocks = <&atl_clkin0_ck>, <&atl_clkin1_ck>, <&atl_clkin2_ck>, <&atl_clkin3_ck>; clocks = <&atl_gfclk_mux>; clock-names = "fck"; status = "disabled"; }; crossbar_mpu: crossbar@4a002a48 { compatible = "ti,irq-crossbar"; reg = <0x4a002a48 0x130>; interrupt-controller; interrupt-parent = <&wakeupgen>; #interrupt-cells = <3>; ti,max-irqs = <160>; ti,max-crossbar-sources = ; ti,reg-size = <2>; ti,irqs-reserved = <0 1 2 3 5 6 131 132>; ti,irqs-skip = <10 133 139 140>; ti,irqs-safe-map = <0>; }; mac: ethernet@4a100000 { compatible = "ti,cpsw"; ti,hwmods = "gmac"; clocks = <&dpll_gmac_ck>, <&gmac_gmii_ref_clk_div>; clock-names = "fck", "cpts"; cpdma_channels = <8>; ale_entries = <1024>; bd_ram_size = <0x2000>; no_bd_ram = <0>; rx_descs = <64>; mac_control = <0x20>; slaves = <2>; active_slave = <0>; cpts_clock_mult = <0x80000000>; cpts_clock_shift = <29>; reg = <0x48484000 0x1000 0x48485200 0x2E00>; #address-cells = <1>; #size-cells = <1>; /* * rx_thresh_pend * rx_pend * tx_pend * misc_pend */ interrupts = , , , ; ranges; status = "disabled"; davinci_mdio: mdio@48485000 { compatible = "ti,davinci_mdio"; #address-cells = <1>; #size-cells = <0>; ti,hwmods = "davinci_mdio"; bus_freq = <1000000>; reg = <0x48485000 0x100>; }; cpsw_emac0: slave@48480200 { /* Filled in by U-Boot */ mac-address = [ 00 00 00 00 00 00 ]; }; cpsw_emac1: slave@48480300 { /* Filled in by U-Boot */ mac-address = [ 00 00 00 00 00 00 ]; }; phy_sel: cpsw-phy-sel@4a002554 { compatible = "ti,dra7xx-cpsw-phy-sel"; reg= <0x4a002554 0x4>; reg-names = "gmii-sel"; }; }; dcan1: can@481cc000 { compatible = "ti,dra7-d_can"; ti,hwmods = "dcan1"; reg = <0x4ae3c000 0x2000>; syscon-raminit = <&dra7_ctrl_core 0x558 0>; interrupts = ; clocks = <&dcan1_sys_clk_mux>; status = "disabled"; }; dcan2: can@481d0000 { compatible = "ti,dra7-d_can"; ti,hwmods = "dcan2"; reg = <0x48480000 0x2000>; syscon-raminit = <&dra7_ctrl_core 0x558 1>; interrupts = ; clocks = <&sys_clkin1>; status = "disabled"; }; }; }; /include/ "dra7xx-clocks.dtsi"