.. SPDX-License-Identifier: GPL-2.0 =================== ice devlink support =================== This document describes the devlink features implemented by the ``ice`` device driver. Info versions ============= The ``ice`` driver reports the following versions .. list-table:: devlink info versions implemented :widths: 5 5 5 90 * - Name - Type - Example - Description * - ``board.id`` - fixed - K65390-000 - The Product Board Assembly (PBA) identifier of the board. * - ``fw.mgmt`` - running - 2.1.7 - 3-digit version number of the management firmware running on the Embedded Management Processor of the device. It controls the PHY, link, access to device resources, etc. Intel documentation refers to this as the EMP firmware. * - ``fw.mgmt.api`` - running - 1.5.1 - 3-digit version number (major.minor.patch) of the API exported over the AdminQ by the management firmware. Used by the driver to identify what commands are supported. Historical versions of the kernel only displayed a 2-digit version number (major.minor). * - ``fw.mgmt.build`` - running - 0x305d955f - Unique identifier of the source for the management firmware. * - ``fw.undi`` - running - 1.2581.0 - Version of the Option ROM containing the UEFI driver. The version is reported in ``major.minor.patch`` format. The major version is incremented whenever a major breaking change occurs, or when the minor version would overflow. The minor version is incremented for non-breaking changes and reset to 1 when the major version is incremented. The patch version is normally 0 but is incremented when a fix is delivered as a patch against an older base Option ROM. * - ``fw.psid.api`` - running - 0.80 - Version defining the format of the flash contents. * - ``fw.bundle_id`` - running - 0x80002ec0 - Unique identifier of the firmware image file that was loaded onto the device. Also referred to as the EETRACK identifier of the NVM. * - ``fw.app.name`` - running - ICE OS Default Package - The name of the DDP package that is active in the device. The DDP package is loaded by the driver during initialization. Each variation of the DDP package has a unique name. * - ``fw.app`` - running - 1.3.1.0 - The version of the DDP package that is active in the device. Note that both the name (as reported by ``fw.app.name``) and version are required to uniquely identify the package. * - ``fw.app.bundle_id`` - running - 0xc0000001 - Unique identifier for the DDP package loaded in the device. Also referred to as the DDP Track ID. Can be used to uniquely identify the specific DDP package. * - ``fw.netlist`` - running - 1.1.2000-6.7.0 - The version of the netlist module. This module defines the device's Ethernet capabilities and default settings, and is used by the management firmware as part of managing link and device connectivity. * - ``fw.netlist.build`` - running - 0xee16ced7 - The first 4 bytes of the hash of the netlist module contents. Flash Update ============ The ``ice`` driver implements support for flash update using the ``devlink-flash`` interface. It supports updating the device flash using a combined flash image that contains the ``fw.mgmt``, ``fw.undi``, and ``fw.netlist`` components. .. list-table:: List of supported overwrite modes :widths: 5 95 * - Bits - Behavior * - ``DEVLINK_FLASH_OVERWRITE_SETTINGS`` - Do not preserve settings stored in the flash components being updated. This includes overwriting the port configuration that determines the number of physical functions the device will initialize with. * - ``DEVLINK_FLASH_OVERWRITE_SETTINGS`` and ``DEVLINK_FLASH_OVERWRITE_IDENTIFIERS`` - Do not preserve either settings or identifiers. Overwrite everything in the flash with the contents from the provided image, without performing any preservation. This includes overwriting device identifying fields such as the MAC address, VPD area, and device serial number. It is expected that this combination be used with an image customized for the specific device. The ice hardware does not support overwriting only identifiers while preserving settings, and thus ``DEVLINK_FLASH_OVERWRITE_IDENTIFIERS`` on its own will be rejected. If no overwrite mask is provided, the firmware will be instructed to preserve all settings and identifying fields when updating. Reload ====== The ``ice`` driver supports activating new firmware after a flash update using ``DEVLINK_CMD_RELOAD`` with the ``DEVLINK_RELOAD_ACTION_FW_ACTIVATE`` action. .. code:: shell $ devlink dev reload pci/0000:01:00.0 reload action fw_activate The new firmware is activated by issuing a device specific Embedded Management Processor reset which requests the device to reset and reload the EMP firmware image. The driver does not currently support reloading the driver via ``DEVLINK_RELOAD_ACTION_DRIVER_REINIT``. Port split ========== The ``ice`` driver supports port splitting only for port 0, as the FW has a predefined set of available port split options for the whole device. A system reboot is required for port split to be applied. The following command will select the port split option with 4 ports: .. code:: shell $ devlink port split pci/0000:16:00.0/0 count 4 The list of all available port options will be printed to dynamic debug after each ``split`` and ``unsplit`` command. The first option is the default. .. code:: shell ice 0000:16:00.0: Available port split options and max port speeds (Gbps): ice 0000:16:00.0: Status Split Quad 0 Quad 1 ice 0000:16:00.0: count L0 L1 L2 L3 L4 L5 L6 L7 ice 0000:16:00.0: Active 2 100 - - - 100 - - - ice 0000:16:00.0: 2 50 - 50 - - - - - ice 0000:16:00.0: Pending 4 25 25 25 25 - - - - ice 0000:16:00.0: 4 25 25 - - 25 25 - - ice 0000:16:00.0: 8 10 10 10 10 10 10 10 10 ice 0000:16:00.0: 1 100 - - - - - - - There could be multiple FW port options with the same port split count. When the same port split count request is issued again, the next FW port option with the same port split count will be selected. ``devlink port unsplit`` will select the option with a split count of 1. If there is no FW option available with split count 1, you will receive an error. Regions ======= The ``ice`` driver implements the following regions for accessing internal device data. .. list-table:: regions implemented :widths: 15 85 * - Name - Description * - ``nvm-flash`` - The contents of the entire flash chip, sometimes referred to as the device's Non Volatile Memory. * - ``shadow-ram`` - The contents of the Shadow RAM, which is loaded from the beginning of the flash. Although the contents are primarily from the flash, this area also contains data generated during device boot which is not stored in flash. * - ``device-caps`` - The contents of the device firmware's capabilities buffer. Useful to determine the current state and configuration of the device. Both the ``nvm-flash`` and ``shadow-ram`` regions can be accessed without a snapshot. The ``device-caps`` region requires a snapshot as the contents are sent by firmware and can't be split into separate reads. Users can request an immediate capture of a snapshot for all three regions via the ``DEVLINK_CMD_REGION_NEW`` command. .. code:: shell $ devlink region show pci/0000:01:00.0/nvm-flash: size 10485760 snapshot [] max 1 pci/0000:01:00.0/device-caps: size 4096 snapshot [] max 10 $ devlink region new pci/0000:01:00.0/nvm-flash snapshot 1 $ devlink region dump pci/0000:01:00.0/nvm-flash snapshot 1 $ devlink region dump pci/0000:01:00.0/nvm-flash snapshot 1 0000000000000000 0014 95dc 0014 9514 0035 1670 0034 db30 0000000000000010 0000 0000 ffff ff04 0029 8c00 0028 8cc8 0000000000000020 0016 0bb8 0016 1720 0000 0000 c00f 3ffc 0000000000000030 bada cce5 bada cce5 bada cce5 bada cce5 $ devlink region read pci/0000:01:00.0/nvm-flash snapshot 1 address 0 length 16 0000000000000000 0014 95dc 0014 9514 0035 1670 0034 db30 $ devlink region delete pci/0000:01:00.0/nvm-flash snapshot 1 $ devlink region new pci/0000:01:00.0/device-caps snapshot 1 $ devlink region dump pci/0000:01:00.0/device-caps snapshot 1 0000000000000000 01 00 01 00 00 00 00 00 01 00 00 00 00 00 00 00 0000000000000010 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0000000000000020 02 00 02 01 32 03 00 00 0a 00 00 00 25 00 00 00 0000000000000030 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0000000000000040 04 00 01 00 01 00 00 00 00 00 00 00 00 00 00 00 0000000000000050 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0000000000000060 05 00 01 00 03 00 00 00 00 00 00 00 00 00 00 00 0000000000000070 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0000000000000080 06 00 01 00 01 00 00 00 00 00 00 00 00 00 00 00 0000000000000090 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00000000000000a0 08 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00000000000000b0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00000000000000c0 12 00 01 00 01 00 00 00 01 00 01 00 00 00 00 00 00000000000000d0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00000000000000e0 13 00 01 00 00 01 00 00 00 00 00 00 00 00 00 00 00000000000000f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0000000000000100 14 00 01 00 01 00 00 00 00 00 00 00 00 00 00 00 0000000000000110 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0000000000000120 15 00 01 00 01 00 00 00 00 00 00 00 00 00 00 00 0000000000000130 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0000000000000140 16 00 01 00 01 00 00 00 00 00 00 00 00 00 00 00 0000000000000150 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0000000000000160 17 00 01 00 06 00 00 00 00 00 00 00 00 00 00 00 0000000000000170 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0000000000000180 18 00 01 00 01 00 00 00 01 00 00 00 08 00 00 00 0000000000000190 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00000000000001a0 22 00 01 00 01 00 00 00 00 00 00 00 00 00 00 00 00000000000001b0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00000000000001c0 40 00 01 00 00 08 00 00 08 00 00 00 00 00 00 00 00000000000001d0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00000000000001e0 41 00 01 00 00 08 00 00 00 00 00 00 00 00 00 00 00000000000001f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0000000000000200 42 00 01 00 00 08 00 00 00 00 00 00 00 00 00 00 0000000000000210 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 $ devlink region delete pci/0000:01:00.0/device-caps snapshot 1 Devlink Rate ============ The ``ice`` driver implements devlink-rate API. It allows for offload of the Hierarchical QoS to the hardware. It enables user to group Virtual Functions in a tree structure and assign supported parameters: tx_share, tx_max, tx_priority and tx_weight to each node in a tree. So effectively user gains an ability to control how much bandwidth is allocated for each VF group. This is later enforced by the HW. It is assumed that this feature is mutually exclusive with DCB performed in FW and ADQ, or any driver feature that would trigger changes in QoS, for example creation of the new traffic class. The driver will prevent DCB or ADQ configuration if user started making any changes to the nodes using devlink-rate API. To configure those features a driver reload is necessary. Correspondingly if ADQ or DCB will get configured the driver won't export hierarchy at all, or will remove the untouched hierarchy if those features are enabled after the hierarchy is exported, but before any changes are made. This feature is also dependent on switchdev being enabled in the system. It's required bacause devlink-rate requires devlink-port objects to be present, and those objects are only created in switchdev mode. If the driver is set to the switchdev mode, it will export internal hierarchy the moment VF's are created. Root of the tree is always represented by the node_0. This node can't be deleted by the user. Leaf nodes and nodes with children also can't be deleted. .. list-table:: Attributes supported :widths: 15 85 * - Name - Description * - ``tx_max`` - maximum bandwidth to be consumed by the tree Node. Rate Limit is an absolute number specifying a maximum amount of bytes a Node may consume during the course of one second. Rate limit guarantees that a link will not oversaturate the receiver on the remote end and also enforces an SLA between the subscriber and network provider. * - ``tx_share`` - minimum bandwidth allocated to a tree node when it is not blocked. It specifies an absolute BW. While tx_max defines the maximum bandwidth the node may consume, the tx_share marks committed BW for the Node. * - ``tx_priority`` - allows for usage of strict priority arbiter among siblings. This arbitration scheme attempts to schedule nodes based on their priority as long as the nodes remain within their bandwidth limit. Range 0-7. Nodes with priority 7 have the highest priority and are selected first, while nodes with priority 0 have the lowest priority. Nodes that have the same priority are treated equally. * - ``tx_weight`` - allows for usage of Weighted Fair Queuing arbitration scheme among siblings. This arbitration scheme can be used simultaneously with the strict priority. Range 1-200. Only relative values mater for arbitration. ``tx_priority`` and ``tx_weight`` can be used simultaneously. In that case nodes with the same priority form a WFQ subgroup in the sibling group and arbitration among them is based on assigned weights. .. code:: shell # enable switchdev $ devlink dev eswitch set pci/0000:4b:00.0 mode switchdev # at this point driver should export internal hierarchy $ echo 2 > /sys/class/net/ens785np0/device/sriov_numvfs $ devlink port function rate show pci/0000:4b:00.0/node_25: type node parent node_24 pci/0000:4b:00.0/node_24: type node parent node_0 pci/0000:4b:00.0/node_32: type node parent node_31 pci/0000:4b:00.0/node_31: type node parent node_30 pci/0000:4b:00.0/node_30: type node parent node_16 pci/0000:4b:00.0/node_19: type node parent node_18 pci/0000:4b:00.0/node_18: type node parent node_17 pci/0000:4b:00.0/node_17: type node parent node_16 pci/0000:4b:00.0/node_14: type node parent node_5 pci/0000:4b:00.0/node_5: type node parent node_3 pci/0000:4b:00.0/node_13: type node parent node_4 pci/0000:4b:00.0/node_12: type node parent node_4 pci/0000:4b:00.0/node_11: type node parent node_4 pci/0000:4b:00.0/node_10: type node parent node_4 pci/0000:4b:00.0/node_9: type node parent node_4 pci/0000:4b:00.0/node_8: type node parent node_4 pci/0000:4b:00.0/node_7: type node parent node_4 pci/0000:4b:00.0/node_6: type node parent node_4 pci/0000:4b:00.0/node_4: type node parent node_3 pci/0000:4b:00.0/node_3: type node parent node_16 pci/0000:4b:00.0/node_16: type node parent node_15 pci/0000:4b:00.0/node_15: type node parent node_0 pci/0000:4b:00.0/node_2: type node parent node_1 pci/0000:4b:00.0/node_1: type node parent node_0 pci/0000:4b:00.0/node_0: type node pci/0000:4b:00.0/1: type leaf parent node_25 pci/0000:4b:00.0/2: type leaf parent node_25 # let's create some custom node $ devlink port function rate add pci/0000:4b:00.0/node_custom parent node_0 # second custom node $ devlink port function rate add pci/0000:4b:00.0/node_custom_1 parent node_custom # reassign second VF to newly created branch $ devlink port function rate set pci/0000:4b:00.0/2 parent node_custom_1 # assign tx_weight to the VF $ devlink port function rate set pci/0000:4b:00.0/2 tx_weight 5 # assign tx_share to the VF $ devlink port function rate set pci/0000:4b:00.0/2 tx_share 500Mbps