The saa7134 driver
==================

Author Gerd Hoffmann


This is a v4l2/oss device driver for saa7130/33/34/35 based capture / TV
boards.  See http://www.semiconductors.philips.com/pip/saa7134hl for a
description.


Status
------

Almost everything is working.  video, sound, tuner, radio, mpeg ts, ...

As with bttv, card-specific tweaks are needed.  Check CARDLIST for a
list of known TV cards and saa7134-cards.c for the drivers card
configuration info.


Build
-----

Pick up videodev + v4l2 patches from http://bytesex.org/patches/.
Configure, build, install + boot the new kernel.  You'll need at least
these config options:

.. code-block:: none

	CONFIG_I2C=m
	CONFIG_VIDEO_DEV=m

Type "make" to build the driver now.  "make install" installs the
driver.  "modprobe saa7134" should load it.  Depending on the card you
might have to pass card=<nr> as insmod option, check CARDLIST for
valid choices.


Changes / Fixes
---------------

Please mail me unified diffs ("diff -u") with your changes, and don't
forget to tell me what it changes / which problem it fixes / whatever
it is good for ...


Known Problems
--------------

* The tuner for the flyvideos isn't detected automatically and the
  default might not work for you depending on which version you have.
  There is a tuner= insmod option to override the driver's default.

Card Variations:
----------------

Cards can use either of these two crystals (xtal):

- 32.11 MHz -> .audio_clock=0x187de7
- 24.576MHz -> .audio_clock=0x200000 (xtal * .audio_clock = 51539600)

Some details about 30/34/35:

- saa7130 - low-price chip, doesn't have mute, that is why all those
  cards should have .mute field defined in their tuner structure.

- saa7134 - usual chip

- saa7133/35 - saa7135 is probably a marketing decision, since all those
  chips identifies itself as 33 on pci.

LifeView GPIOs
--------------

This section was authored by: Peter Missel <peter.missel@onlinehome.de>

- LifeView FlyTV Platinum FM (LR214WF)

    - GP27    MDT2005 PB4 pin 10
    - GP26    MDT2005 PB3 pin 9
    - GP25    MDT2005 PB2 pin 8
    - GP23    MDT2005 PB1 pin 7
    - GP22    MDT2005 PB0 pin 6
    - GP21    MDT2005 PB5 pin 11
    - GP20    MDT2005 PB6 pin 12
    - GP19    MDT2005 PB7 pin 13
    - nc      MDT2005 PA3 pin 2
    - Remote  MDT2005 PA2 pin 1
    - GP18    MDT2005 PA1 pin 18
    - nc      MDT2005 PA0 pin 17 strap low
    - GP17    Strap "GP7"=High
    - GP16    Strap "GP6"=High

	- 0=Radio 1=TV
	- Drives SA630D ENCH1 and HEF4052 A1 pinsto do FM radio through
	  SIF input

    - GP15    nc
    - GP14    nc
    - GP13    nc
    - GP12    Strap "GP5" = High
    - GP11    Strap "GP4" = High
    - GP10    Strap "GP3" = High
    - GP09    Strap "GP2" = Low
    - GP08    Strap "GP1" = Low
    - GP07.00 nc

Credits
-------

andrew.stevens@philips.com + werner.leeb@philips.com for providing
saa7134 hardware specs and sample board.