From 7ff6d1d25a9ea3a03f795d383889ac34fbc601d5 Mon Sep 17 00:00:00 2001 From: Kent Gibson Date: Mon, 28 Sep 2020 08:28:04 +0800 Subject: tools: gpio: port gpio-hammer to v2 uAPI Port the gpio-hammer tool to the latest GPIO uAPI. Signed-off-by: Kent Gibson Reviewed-by: Andy Shevchenko Signed-off-by: Bartosz Golaszewski --- tools/gpio/gpio-utils.c | 164 +++++++++++++++++++++++++++++++++++++++--------- 1 file changed, 135 insertions(+), 29 deletions(-) (limited to 'tools/gpio/gpio-utils.c') diff --git a/tools/gpio/gpio-utils.c b/tools/gpio/gpio-utils.c index d527980bcb94..37187e056c8b 100644 --- a/tools/gpio/gpio-utils.c +++ b/tools/gpio/gpio-utils.c @@ -100,20 +100,87 @@ exit_free_name: free(chrdev_name); return ret < 0 ? ret : req.fd; } + +/** + * gpiotools_request_line() - request gpio lines in a gpiochip + * @device_name: The name of gpiochip without prefix "/dev/", + * such as "gpiochip0" + * @lines: An array desired lines, specified by offset + * index for the associated GPIO device. + * @num_lines: The number of lines to request. + * @config: The new config for requested gpio. Reference + * "linux/gpio.h" for config details. + * @consumer: The name of consumer, such as "sysfs", + * "powerkey". This is useful for other users to + * know who is using. + * + * Request gpio lines through the ioctl provided by chardev. User + * could call gpiotools_set_values() and gpiotools_get_values() to + * read and write respectively through the returned fd. Call + * gpiotools_release_line() to release these lines after that. + * + * Return: On success return the fd; + * On failure return the errno. + */ +int gpiotools_request_line(const char *device_name, unsigned int *lines, + unsigned int num_lines, + struct gpio_v2_line_config *config, + const char *consumer) +{ + struct gpio_v2_line_request req; + char *chrdev_name; + int fd; + int i; + int ret; + + ret = asprintf(&chrdev_name, "/dev/%s", device_name); + if (ret < 0) + return -ENOMEM; + + fd = open(chrdev_name, 0); + if (fd == -1) { + ret = -errno; + fprintf(stderr, "Failed to open %s, %s\n", + chrdev_name, strerror(errno)); + goto exit_free_name; + } + + memset(&req, 0, sizeof(req)); + for (i = 0; i < num_lines; i++) + req.offsets[i] = lines[i]; + + req.config = *config; + strcpy(req.consumer, consumer); + req.num_lines = num_lines; + + ret = ioctl(fd, GPIO_V2_GET_LINE_IOCTL, &req); + if (ret == -1) { + ret = -errno; + fprintf(stderr, "Failed to issue %s (%d), %s\n", + "GPIO_GET_LINE_IOCTL", ret, strerror(errno)); + } + + if (close(fd) == -1) + perror("Failed to close GPIO character device file"); +exit_free_name: + free(chrdev_name); + return ret < 0 ? ret : req.fd; +} + /** * gpiotools_set_values(): Set the value of gpio(s) * @fd: The fd returned by - * gpiotools_request_linehandle(). - * @data: The array of values want to set. + * gpiotools_request_line(). + * @values: The array of values want to set. * * Return: On success return 0; * On failure return the errno. */ -int gpiotools_set_values(const int fd, struct gpiohandle_data *data) +int gpiotools_set_values(const int fd, struct gpio_v2_line_values *values) { int ret; - ret = ioctl(fd, GPIOHANDLE_SET_LINE_VALUES_IOCTL, data); + ret = ioctl(fd, GPIO_V2_LINE_SET_VALUES_IOCTL, values); if (ret == -1) { ret = -errno; fprintf(stderr, "Failed to issue %s (%d), %s\n", @@ -127,17 +194,17 @@ int gpiotools_set_values(const int fd, struct gpiohandle_data *data) /** * gpiotools_get_values(): Get the value of gpio(s) * @fd: The fd returned by - * gpiotools_request_linehandle(). - * @data: The array of values get from hardware. + * gpiotools_request_line(). + * @values: The array of values get from hardware. * * Return: On success return 0; * On failure return the errno. */ -int gpiotools_get_values(const int fd, struct gpiohandle_data *data) +int gpiotools_get_values(const int fd, struct gpio_v2_line_values *values) { int ret; - ret = ioctl(fd, GPIOHANDLE_GET_LINE_VALUES_IOCTL, data); + ret = ioctl(fd, GPIO_V2_LINE_GET_VALUES_IOCTL, values); if (ret == -1) { ret = -errno; fprintf(stderr, "Failed to issue %s (%d), %s\n", @@ -169,6 +236,27 @@ int gpiotools_release_linehandle(const int fd) return ret; } +/** + * gpiotools_release_line(): Release the line(s) of gpiochip + * @fd: The fd returned by + * gpiotools_request_line(). + * + * Return: On success return 0; + * On failure return the errno. + */ +int gpiotools_release_line(const int fd) +{ + int ret; + + ret = close(fd); + if (ret == -1) { + perror("Failed to close GPIO LINE device file"); + ret = -errno; + } + + return ret; +} + /** * gpiotools_get(): Get value from specific line * @device_name: The name of gpiochip without prefix "/dev/", @@ -180,11 +268,14 @@ int gpiotools_release_linehandle(const int fd) */ int gpiotools_get(const char *device_name, unsigned int line) { - struct gpiohandle_data data; + int ret; + unsigned int value; unsigned int lines[] = {line}; - gpiotools_gets(device_name, lines, 1, &data); - return data.values[0]; + ret = gpiotools_gets(device_name, lines, 1, &value); + if (ret) + return ret; + return value; } @@ -195,27 +286,35 @@ int gpiotools_get(const char *device_name, unsigned int line) * @lines: An array desired lines, specified by offset * index for the associated GPIO device. * @num_lines: The number of lines to request. - * @data: The array of values get from gpiochip. + * @values: The array of values get from gpiochip. * * Return: On success return 0; * On failure return the errno. */ int gpiotools_gets(const char *device_name, unsigned int *lines, - unsigned int num_lines, struct gpiohandle_data *data) + unsigned int num_lines, unsigned int *values) { - int fd; + int fd, i; int ret; int ret_close; + struct gpio_v2_line_config config; + struct gpio_v2_line_values lv; - ret = gpiotools_request_linehandle(device_name, lines, num_lines, - GPIOHANDLE_REQUEST_INPUT, data, - CONSUMER); + memset(&config, 0, sizeof(config)); + config.flags = GPIO_V2_LINE_FLAG_INPUT; + ret = gpiotools_request_line(device_name, lines, num_lines, + &config, CONSUMER); if (ret < 0) return ret; fd = ret; - ret = gpiotools_get_values(fd, data); - ret_close = gpiotools_release_linehandle(fd); + for (i = 0; i < num_lines; i++) + gpiotools_set_bit(&lv.mask, i); + ret = gpiotools_get_values(fd, &lv); + if (!ret) + for (i = 0; i < num_lines; i++) + values[i] = gpiotools_test_bit(lv.bits, i); + ret_close = gpiotools_release_line(fd); return ret < 0 ? ret : ret_close; } @@ -232,11 +331,9 @@ int gpiotools_gets(const char *device_name, unsigned int *lines, int gpiotools_set(const char *device_name, unsigned int line, unsigned int value) { - struct gpiohandle_data data; unsigned int lines[] = {line}; - data.values[0] = value; - return gpiotools_sets(device_name, lines, 1, &data); + return gpiotools_sets(device_name, lines, 1, &value); } /** @@ -246,22 +343,31 @@ int gpiotools_set(const char *device_name, unsigned int line, * @lines: An array desired lines, specified by offset * index for the associated GPIO device. * @num_lines: The number of lines to request. - * @data: The array of values set to gpiochip, must be + * @value: The array of values set to gpiochip, must be * 0(low) or 1(high). * * Return: On success return 0; * On failure return the errno. */ int gpiotools_sets(const char *device_name, unsigned int *lines, - unsigned int num_lines, struct gpiohandle_data *data) + unsigned int num_lines, unsigned int *values) { - int ret; + int ret, i; + struct gpio_v2_line_config config; - ret = gpiotools_request_linehandle(device_name, lines, num_lines, - GPIOHANDLE_REQUEST_OUTPUT, data, - CONSUMER); + memset(&config, 0, sizeof(config)); + config.flags = GPIO_V2_LINE_FLAG_OUTPUT; + config.num_attrs = 1; + config.attrs[0].attr.id = GPIO_V2_LINE_ATTR_ID_OUTPUT_VALUES; + for (i = 0; i < num_lines; i++) { + gpiotools_set_bit(&config.attrs[0].mask, i); + gpiotools_assign_bit(&config.attrs[0].attr.values, + i, values[i]); + } + ret = gpiotools_request_line(device_name, lines, num_lines, + &config, CONSUMER); if (ret < 0) return ret; - return gpiotools_release_linehandle(ret); + return gpiotools_release_line(ret); } -- cgit v1.2.3