From d40e3e9e44db4b3c8777f3b515ba6097ba26e3b2 Mon Sep 17 00:00:00 2001 From: "Andrew F. Davis" Date: Fri, 31 Aug 2018 10:14:05 -0500 Subject: ASoC: tas6424: Save last fault register even when clear When there is no fault bit set in a fault register we skip the fault reporting section for that register. This also skips over saving that registers value. We save the value so we will not double report an error, but if an error clears then returns we will also not report it as we did not save the all cleared register value. Fix this by saving the fault register value in the all clear path. Signed-off-by: Andrew F. Davis Signed-off-by: Mark Brown Cc: stable@vger.kernel.org --- sound/soc/codecs/tas6424.c | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-) (limited to 'sound') diff --git a/sound/soc/codecs/tas6424.c b/sound/soc/codecs/tas6424.c index 14999b999fd3..0d6145549a98 100644 --- a/sound/soc/codecs/tas6424.c +++ b/sound/soc/codecs/tas6424.c @@ -424,8 +424,10 @@ static void tas6424_fault_check_work(struct work_struct *work) TAS6424_FAULT_PVDD_UV | TAS6424_FAULT_VBAT_UV; - if (reg) + if (!reg) { + tas6424->last_fault1 = reg; goto check_global_fault2_reg; + } /* * Only flag errors once for a given occurrence. This is needed as @@ -461,8 +463,10 @@ check_global_fault2_reg: TAS6424_FAULT_OTSD_CH3 | TAS6424_FAULT_OTSD_CH4; - if (!reg) + if (!reg) { + tas6424->last_fault2 = reg; goto check_warn_reg; + } if ((reg & TAS6424_FAULT_OTSD) && !(tas6424->last_fault2 & TAS6424_FAULT_OTSD)) dev_crit(dev, "experienced a global overtemp shutdown\n"); @@ -497,8 +501,10 @@ check_warn_reg: TAS6424_WARN_VDD_OTW_CH3 | TAS6424_WARN_VDD_OTW_CH4; - if (!reg) + if (!reg) { + tas6424->last_warn = reg; goto out; + } if ((reg & TAS6424_WARN_VDD_UV) && !(tas6424->last_warn & TAS6424_WARN_VDD_UV)) dev_warn(dev, "experienced a VDD under voltage condition\n"); -- cgit v1.2.3