From 8af3aeb498197f6fdf5acc913ffe8a392cb921c9 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Wed, 18 Nov 2009 14:23:37 +0100 Subject: ALSA: hda - Fix detection of dual headphones The dual-headphone mode with STAC/IDT codecs is useful only for machines that have two (or more) built-in headphones. But, some HP laptops give multiple headphone pin configs, one for the built-in and another for the separate (likely a docking station) one. This results in a missing speaker volume control. This patch adds more check for the dual-headphone mode to avoid this problem. Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_sigmatel.c | 23 +++++++++++++++++++++-- 1 file changed, 21 insertions(+), 2 deletions(-) (limited to 'sound') diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c index d83649c25fb2..39001c47e627 100644 --- a/sound/pci/hda/patch_sigmatel.c +++ b/sound/pci/hda/patch_sigmatel.c @@ -3635,6 +3635,26 @@ static void stac92xx_auto_init_hp_out(struct hda_codec *codec) } } +static int is_dual_headphones(struct hda_codec *codec) +{ + struct sigmatel_spec *spec = codec->spec; + int i, valid_hps; + + if (spec->autocfg.line_out_type != AUTO_PIN_SPEAKER_OUT || + spec->autocfg.hp_outs <= 1) + return 0; + valid_hps = 0; + for (i = 0; i < spec->autocfg.hp_outs; i++) { + hda_nid_t nid = spec->autocfg.hp_pins[i]; + unsigned int cfg = snd_hda_codec_get_pincfg(codec, nid); + if (get_defcfg_location(cfg) & AC_JACK_LOC_SEPARATE) + continue; + valid_hps++; + } + return (valid_hps > 1); +} + + static int stac92xx_parse_auto_config(struct hda_codec *codec, hda_nid_t dig_out, hda_nid_t dig_in) { struct sigmatel_spec *spec = codec->spec; @@ -3651,8 +3671,7 @@ static int stac92xx_parse_auto_config(struct hda_codec *codec, hda_nid_t dig_out /* If we have no real line-out pin and multiple hp-outs, HPs should * be set up as multi-channel outputs. */ - if (spec->autocfg.line_out_type == AUTO_PIN_SPEAKER_OUT && - spec->autocfg.hp_outs > 1) { + if (is_dual_headphones(codec)) { /* Copy hp_outs to line_outs, backup line_outs in * speaker_outs so that the following routines can handle * HP pins as primary outputs. -- cgit v1.2.3