From 69b626e68207cf78015ec13f0077af174d710f97 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Mon, 29 Jan 2018 03:05:28 +0000 Subject: ASoC: wm8955: replace codec to component Now we can replace Codec to Component. Let's do it. Note: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 0 -> .idle_bias_on = 1 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto Signed-off-by: Mark Brown --- sound/soc/codecs/wm8955.c | 189 ++++++++++++++++++++++------------------------ 1 file changed, 91 insertions(+), 98 deletions(-) (limited to 'sound') diff --git a/sound/soc/codecs/wm8955.c b/sound/soc/codecs/wm8955.c index 1edc7b1df31d..ba44e3d6c1e0 100644 --- a/sound/soc/codecs/wm8955.c +++ b/sound/soc/codecs/wm8955.c @@ -128,9 +128,9 @@ static bool wm8955_volatile(struct device *dev, unsigned int reg) } } -static int wm8955_reset(struct snd_soc_codec *codec) +static int wm8955_reset(struct snd_soc_component *component) { - return snd_soc_write(codec, WM8955_RESET, 0); + return snd_soc_component_write(component, WM8955_RESET, 0); } struct pll_factors { @@ -242,9 +242,9 @@ static struct { { 11289600, 88200, 0, 31, }, }; -static int wm8955_configure_clocking(struct snd_soc_codec *codec) +static int wm8955_configure_clocking(struct snd_soc_component *component) { - struct wm8955_priv *wm8955 = snd_soc_codec_get_drvdata(codec); + struct wm8955_priv *wm8955 = snd_soc_component_get_drvdata(component); int i, ret, val; int clocking = 0; int srate = 0; @@ -267,7 +267,7 @@ static int wm8955_configure_clocking(struct snd_soc_codec *codec) /* We should never get here with an unsupported sample rate */ if (sr == -1) { - dev_err(codec->dev, "Sample rate %dHz unsupported\n", + dev_err(component->dev, "Sample rate %dHz unsupported\n", wm8955->fs); WARN_ON(sr == -1); return -EINVAL; @@ -282,30 +282,30 @@ static int wm8955_configure_clocking(struct snd_soc_codec *codec) /* Use the last divider configuration we saw for the * sample rate. */ - ret = wm8995_pll_factors(codec->dev, wm8955->mclk_rate, + ret = wm8995_pll_factors(component->dev, wm8955->mclk_rate, clock_cfgs[sr].mclk, &pll); if (ret != 0) { - dev_err(codec->dev, + dev_err(component->dev, "Unable to generate %dHz from %dHz MCLK\n", wm8955->fs, wm8955->mclk_rate); return -EINVAL; } - snd_soc_update_bits(codec, WM8955_PLL_CONTROL_1, + snd_soc_component_update_bits(component, WM8955_PLL_CONTROL_1, WM8955_N_MASK | WM8955_K_21_18_MASK, (pll.n << WM8955_N_SHIFT) | pll.k >> 18); - snd_soc_update_bits(codec, WM8955_PLL_CONTROL_2, + snd_soc_component_update_bits(component, WM8955_PLL_CONTROL_2, WM8955_K_17_9_MASK, (pll.k >> 9) & WM8955_K_17_9_MASK); - snd_soc_update_bits(codec, WM8955_PLL_CONTROL_3, + snd_soc_component_update_bits(component, WM8955_PLL_CONTROL_3, WM8955_K_8_0_MASK, pll.k & WM8955_K_8_0_MASK); if (pll.k) - snd_soc_update_bits(codec, WM8955_PLL_CONTROL_4, + snd_soc_component_update_bits(component, WM8955_PLL_CONTROL_4, WM8955_KEN, WM8955_KEN); else - snd_soc_update_bits(codec, WM8955_PLL_CONTROL_4, + snd_soc_component_update_bits(component, WM8955_PLL_CONTROL_4, WM8955_KEN, 0); if (pll.outdiv) @@ -314,17 +314,17 @@ static int wm8955_configure_clocking(struct snd_soc_codec *codec) val = WM8955_PLL_RB; /* Now start the PLL running */ - snd_soc_update_bits(codec, WM8955_CLOCKING_PLL, + snd_soc_component_update_bits(component, WM8955_CLOCKING_PLL, WM8955_PLL_RB | WM8955_PLLOUTDIV2, val); - snd_soc_update_bits(codec, WM8955_CLOCKING_PLL, + snd_soc_component_update_bits(component, WM8955_CLOCKING_PLL, WM8955_PLLEN, WM8955_PLLEN); } srate = clock_cfgs[sr].usb | (clock_cfgs[sr].sr << WM8955_SR_SHIFT); - snd_soc_update_bits(codec, WM8955_SAMPLE_RATE, + snd_soc_component_update_bits(component, WM8955_SAMPLE_RATE, WM8955_USB | WM8955_SR_MASK, srate); - snd_soc_update_bits(codec, WM8955_CLOCKING_PLL, + snd_soc_component_update_bits(component, WM8955_CLOCKING_PLL, WM8955_MCLKSEL, clocking); return 0; @@ -333,22 +333,22 @@ static int wm8955_configure_clocking(struct snd_soc_codec *codec) static int wm8955_sysclk(struct snd_soc_dapm_widget *w, struct snd_kcontrol *kcontrol, int event) { - struct snd_soc_codec *codec = snd_soc_dapm_to_codec(w->dapm); + struct snd_soc_component *component = snd_soc_dapm_to_component(w->dapm); int ret = 0; /* Always disable the clocks - if we're doing reconfiguration this * avoids misclocking. */ - snd_soc_update_bits(codec, WM8955_POWER_MANAGEMENT_1, + snd_soc_component_update_bits(component, WM8955_POWER_MANAGEMENT_1, WM8955_DIGENB, 0); - snd_soc_update_bits(codec, WM8955_CLOCKING_PLL, + snd_soc_component_update_bits(component, WM8955_CLOCKING_PLL, WM8955_PLL_RB | WM8955_PLLEN, 0); switch (event) { case SND_SOC_DAPM_POST_PMD: break; case SND_SOC_DAPM_PRE_PMU: - ret = wm8955_configure_clocking(codec); + ret = wm8955_configure_clocking(component); break; default: ret = -EINVAL; @@ -360,9 +360,9 @@ static int wm8955_sysclk(struct snd_soc_dapm_widget *w, static int deemph_settings[] = { 0, 32000, 44100, 48000 }; -static int wm8955_set_deemph(struct snd_soc_codec *codec) +static int wm8955_set_deemph(struct snd_soc_component *component) { - struct wm8955_priv *wm8955 = snd_soc_codec_get_drvdata(codec); + struct wm8955_priv *wm8955 = snd_soc_component_get_drvdata(component); int val, i, best; /* If we're using deemphasis select the nearest available sample @@ -381,17 +381,17 @@ static int wm8955_set_deemph(struct snd_soc_codec *codec) val = 0; } - dev_dbg(codec->dev, "Set deemphasis %d\n", val); + dev_dbg(component->dev, "Set deemphasis %d\n", val); - return snd_soc_update_bits(codec, WM8955_DAC_CONTROL, + return snd_soc_component_update_bits(component, WM8955_DAC_CONTROL, WM8955_DEEMPH_MASK, val); } static int wm8955_get_deemph(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol) { - struct snd_soc_codec *codec = snd_soc_kcontrol_codec(kcontrol); - struct wm8955_priv *wm8955 = snd_soc_codec_get_drvdata(codec); + struct snd_soc_component *component = snd_soc_kcontrol_component(kcontrol); + struct wm8955_priv *wm8955 = snd_soc_component_get_drvdata(component); ucontrol->value.integer.value[0] = wm8955->deemph; return 0; @@ -400,8 +400,8 @@ static int wm8955_get_deemph(struct snd_kcontrol *kcontrol, static int wm8955_put_deemph(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol) { - struct snd_soc_codec *codec = snd_soc_kcontrol_codec(kcontrol); - struct wm8955_priv *wm8955 = snd_soc_codec_get_drvdata(codec); + struct snd_soc_component *component = snd_soc_kcontrol_component(kcontrol); + struct wm8955_priv *wm8955 = snd_soc_component_get_drvdata(component); unsigned int deemph = ucontrol->value.integer.value[0]; if (deemph > 1) @@ -409,7 +409,7 @@ static int wm8955_put_deemph(struct snd_kcontrol *kcontrol, wm8955->deemph = deemph; - return wm8955_set_deemph(codec); + return wm8955_set_deemph(component); } static const char *bass_mode_text[] = { @@ -592,8 +592,8 @@ static int wm8955_hw_params(struct snd_pcm_substream *substream, struct snd_pcm_hw_params *params, struct snd_soc_dai *dai) { - struct snd_soc_codec *codec = dai->codec; - struct wm8955_priv *wm8955 = snd_soc_codec_get_drvdata(codec); + struct snd_soc_component *component = dai->component; + struct wm8955_priv *wm8955 = snd_soc_component_get_drvdata(component); int ret; int wl; @@ -613,25 +613,25 @@ static int wm8955_hw_params(struct snd_pcm_substream *substream, default: return -EINVAL; } - snd_soc_update_bits(codec, WM8955_AUDIO_INTERFACE, + snd_soc_component_update_bits(component, WM8955_AUDIO_INTERFACE, WM8955_WL_MASK, wl); wm8955->fs = params_rate(params); - wm8955_set_deemph(codec); + wm8955_set_deemph(component); /* If the chip is clocked then disable the clocks and force a * reconfiguration, otherwise DAPM will power up the * clocks for us later. */ - ret = snd_soc_read(codec, WM8955_POWER_MANAGEMENT_1); + ret = snd_soc_component_read32(component, WM8955_POWER_MANAGEMENT_1); if (ret < 0) return ret; if (ret & WM8955_DIGENB) { - snd_soc_update_bits(codec, WM8955_POWER_MANAGEMENT_1, + snd_soc_component_update_bits(component, WM8955_POWER_MANAGEMENT_1, WM8955_DIGENB, 0); - snd_soc_update_bits(codec, WM8955_CLOCKING_PLL, + snd_soc_component_update_bits(component, WM8955_CLOCKING_PLL, WM8955_PLL_RB | WM8955_PLLEN, 0); - wm8955_configure_clocking(codec); + wm8955_configure_clocking(component); } return 0; @@ -641,8 +641,8 @@ static int wm8955_hw_params(struct snd_pcm_substream *substream, static int wm8955_set_sysclk(struct snd_soc_dai *dai, int clk_id, unsigned int freq, int dir) { - struct snd_soc_codec *codec = dai->codec; - struct wm8955_priv *priv = snd_soc_codec_get_drvdata(codec); + struct snd_soc_component *component = dai->component; + struct wm8955_priv *priv = snd_soc_component_get_drvdata(component); int div; switch (clk_id) { @@ -655,7 +655,7 @@ static int wm8955_set_sysclk(struct snd_soc_dai *dai, int clk_id, div = 0; } - snd_soc_update_bits(codec, WM8955_SAMPLE_RATE, + snd_soc_component_update_bits(component, WM8955_SAMPLE_RATE, WM8955_MCLKDIV2, div); break; @@ -670,7 +670,7 @@ static int wm8955_set_sysclk(struct snd_soc_dai *dai, int clk_id, static int wm8955_set_fmt(struct snd_soc_dai *dai, unsigned int fmt) { - struct snd_soc_codec *codec = dai->codec; + struct snd_soc_component *component = dai->component; u16 aif = 0; switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) { @@ -739,7 +739,7 @@ static int wm8955_set_fmt(struct snd_soc_dai *dai, unsigned int fmt) return -EINVAL; } - snd_soc_update_bits(codec, WM8955_AUDIO_INTERFACE, + snd_soc_component_update_bits(component, WM8955_AUDIO_INTERFACE, WM8955_MS | WM8955_FORMAT_MASK | WM8955_BCLKINV | WM8955_LRP, aif); @@ -749,7 +749,7 @@ static int wm8955_set_fmt(struct snd_soc_dai *dai, unsigned int fmt) static int wm8955_digital_mute(struct snd_soc_dai *codec_dai, int mute) { - struct snd_soc_codec *codec = codec_dai->codec; + struct snd_soc_component *component = codec_dai->component; int val; if (mute) @@ -757,15 +757,15 @@ static int wm8955_digital_mute(struct snd_soc_dai *codec_dai, int mute) else val = 0; - snd_soc_update_bits(codec, WM8955_DAC_CONTROL, WM8955_DACMU, val); + snd_soc_component_update_bits(component, WM8955_DAC_CONTROL, WM8955_DACMU, val); return 0; } -static int wm8955_set_bias_level(struct snd_soc_codec *codec, +static int wm8955_set_bias_level(struct snd_soc_component *component, enum snd_soc_bias_level level) { - struct wm8955_priv *wm8955 = snd_soc_codec_get_drvdata(codec); + struct wm8955_priv *wm8955 = snd_soc_component_get_drvdata(component); int ret; switch (level) { @@ -774,22 +774,22 @@ static int wm8955_set_bias_level(struct snd_soc_codec *codec, case SND_SOC_BIAS_PREPARE: /* VMID resistance 2*50k */ - snd_soc_update_bits(codec, WM8955_POWER_MANAGEMENT_1, + snd_soc_component_update_bits(component, WM8955_POWER_MANAGEMENT_1, WM8955_VMIDSEL_MASK, 0x1 << WM8955_VMIDSEL_SHIFT); /* Default bias current */ - snd_soc_update_bits(codec, WM8955_ADDITIONAL_CONTROL_1, + snd_soc_component_update_bits(component, WM8955_ADDITIONAL_CONTROL_1, WM8955_VSEL_MASK, 0x2 << WM8955_VSEL_SHIFT); break; case SND_SOC_BIAS_STANDBY: - if (snd_soc_codec_get_bias_level(codec) == SND_SOC_BIAS_OFF) { + if (snd_soc_component_get_bias_level(component) == SND_SOC_BIAS_OFF) { ret = regulator_bulk_enable(ARRAY_SIZE(wm8955->supplies), wm8955->supplies); if (ret != 0) { - dev_err(codec->dev, + dev_err(component->dev, "Failed to enable supplies: %d\n", ret); return ret; @@ -798,7 +798,7 @@ static int wm8955_set_bias_level(struct snd_soc_codec *codec, regcache_sync(wm8955->regmap); /* Enable VREF and VMID */ - snd_soc_update_bits(codec, WM8955_POWER_MANAGEMENT_1, + snd_soc_component_update_bits(component, WM8955_POWER_MANAGEMENT_1, WM8955_VREF | WM8955_VMIDSEL_MASK, WM8955_VREF | @@ -808,29 +808,29 @@ static int wm8955_set_bias_level(struct snd_soc_codec *codec, msleep(500); /* High resistance VROI to maintain outputs */ - snd_soc_update_bits(codec, + snd_soc_component_update_bits(component, WM8955_ADDITIONAL_CONTROL_3, WM8955_VROI, WM8955_VROI); } /* Maintain VMID with 2*250k */ - snd_soc_update_bits(codec, WM8955_POWER_MANAGEMENT_1, + snd_soc_component_update_bits(component, WM8955_POWER_MANAGEMENT_1, WM8955_VMIDSEL_MASK, 0x2 << WM8955_VMIDSEL_SHIFT); /* Minimum bias current */ - snd_soc_update_bits(codec, WM8955_ADDITIONAL_CONTROL_1, + snd_soc_component_update_bits(component, WM8955_ADDITIONAL_CONTROL_1, WM8955_VSEL_MASK, 0); break; case SND_SOC_BIAS_OFF: /* Low resistance VROI to help discharge */ - snd_soc_update_bits(codec, + snd_soc_component_update_bits(component, WM8955_ADDITIONAL_CONTROL_3, WM8955_VROI, 0); /* Turn off VMID and VREF */ - snd_soc_update_bits(codec, WM8955_POWER_MANAGEMENT_1, + snd_soc_component_update_bits(component, WM8955_POWER_MANAGEMENT_1, WM8955_VREF | WM8955_VMIDSEL_MASK, 0); @@ -865,70 +865,70 @@ static struct snd_soc_dai_driver wm8955_dai = { .ops = &wm8955_dai_ops, }; -static int wm8955_probe(struct snd_soc_codec *codec) +static int wm8955_probe(struct snd_soc_component *component) { - struct wm8955_priv *wm8955 = snd_soc_codec_get_drvdata(codec); - struct wm8955_pdata *pdata = dev_get_platdata(codec->dev); + struct wm8955_priv *wm8955 = snd_soc_component_get_drvdata(component); + struct wm8955_pdata *pdata = dev_get_platdata(component->dev); int ret, i; for (i = 0; i < ARRAY_SIZE(wm8955->supplies); i++) wm8955->supplies[i].supply = wm8955_supply_names[i]; - ret = devm_regulator_bulk_get(codec->dev, ARRAY_SIZE(wm8955->supplies), + ret = devm_regulator_bulk_get(component->dev, ARRAY_SIZE(wm8955->supplies), wm8955->supplies); if (ret != 0) { - dev_err(codec->dev, "Failed to request supplies: %d\n", ret); + dev_err(component->dev, "Failed to request supplies: %d\n", ret); return ret; } ret = regulator_bulk_enable(ARRAY_SIZE(wm8955->supplies), wm8955->supplies); if (ret != 0) { - dev_err(codec->dev, "Failed to enable supplies: %d\n", ret); + dev_err(component->dev, "Failed to enable supplies: %d\n", ret); return ret; } - ret = wm8955_reset(codec); + ret = wm8955_reset(component); if (ret < 0) { - dev_err(codec->dev, "Failed to issue reset: %d\n", ret); + dev_err(component->dev, "Failed to issue reset: %d\n", ret); goto err_enable; } /* Change some default settings - latch VU and enable ZC */ - snd_soc_update_bits(codec, WM8955_LEFT_DAC_VOLUME, + snd_soc_component_update_bits(component, WM8955_LEFT_DAC_VOLUME, WM8955_LDVU, WM8955_LDVU); - snd_soc_update_bits(codec, WM8955_RIGHT_DAC_VOLUME, + snd_soc_component_update_bits(component, WM8955_RIGHT_DAC_VOLUME, WM8955_RDVU, WM8955_RDVU); - snd_soc_update_bits(codec, WM8955_LOUT1_VOLUME, + snd_soc_component_update_bits(component, WM8955_LOUT1_VOLUME, WM8955_LO1VU | WM8955_LO1ZC, WM8955_LO1VU | WM8955_LO1ZC); - snd_soc_update_bits(codec, WM8955_ROUT1_VOLUME, + snd_soc_component_update_bits(component, WM8955_ROUT1_VOLUME, WM8955_RO1VU | WM8955_RO1ZC, WM8955_RO1VU | WM8955_RO1ZC); - snd_soc_update_bits(codec, WM8955_LOUT2_VOLUME, + snd_soc_component_update_bits(component, WM8955_LOUT2_VOLUME, WM8955_LO2VU | WM8955_LO2ZC, WM8955_LO2VU | WM8955_LO2ZC); - snd_soc_update_bits(codec, WM8955_ROUT2_VOLUME, + snd_soc_component_update_bits(component, WM8955_ROUT2_VOLUME, WM8955_RO2VU | WM8955_RO2ZC, WM8955_RO2VU | WM8955_RO2ZC); - snd_soc_update_bits(codec, WM8955_MONOOUT_VOLUME, + snd_soc_component_update_bits(component, WM8955_MONOOUT_VOLUME, WM8955_MOZC, WM8955_MOZC); /* Also enable adaptive bass boost by default */ - snd_soc_update_bits(codec, WM8955_BASS_CONTROL, WM8955_BB, WM8955_BB); + snd_soc_component_update_bits(component, WM8955_BASS_CONTROL, WM8955_BB, WM8955_BB); /* Set platform data values */ if (pdata) { if (pdata->out2_speaker) - snd_soc_update_bits(codec, WM8955_ADDITIONAL_CONTROL_2, + snd_soc_component_update_bits(component, WM8955_ADDITIONAL_CONTROL_2, WM8955_ROUT2INV, WM8955_ROUT2INV); if (pdata->monoin_diff) - snd_soc_update_bits(codec, WM8955_MONO_OUT_MIX_1, + snd_soc_component_update_bits(component, WM8955_MONO_OUT_MIX_1, WM8955_DMEN, WM8955_DMEN); } - snd_soc_codec_force_bias_level(codec, SND_SOC_BIAS_STANDBY); + snd_soc_component_force_bias_level(component, SND_SOC_BIAS_STANDBY); /* Bias level configuration will have done an extra enable */ regulator_bulk_disable(ARRAY_SIZE(wm8955->supplies), wm8955->supplies); @@ -940,19 +940,20 @@ err_enable: return ret; } -static const struct snd_soc_codec_driver soc_codec_dev_wm8955 = { - .probe = wm8955_probe, - .set_bias_level = wm8955_set_bias_level, - .suspend_bias_off = true, - - .component_driver = { - .controls = wm8955_snd_controls, - .num_controls = ARRAY_SIZE(wm8955_snd_controls), - .dapm_widgets = wm8955_dapm_widgets, - .num_dapm_widgets = ARRAY_SIZE(wm8955_dapm_widgets), - .dapm_routes = wm8955_dapm_routes, - .num_dapm_routes = ARRAY_SIZE(wm8955_dapm_routes), - }, +static const struct snd_soc_component_driver soc_component_dev_wm8955 = { + .probe = wm8955_probe, + .set_bias_level = wm8955_set_bias_level, + .controls = wm8955_snd_controls, + .num_controls = ARRAY_SIZE(wm8955_snd_controls), + .dapm_widgets = wm8955_dapm_widgets, + .num_dapm_widgets = ARRAY_SIZE(wm8955_dapm_widgets), + .dapm_routes = wm8955_dapm_routes, + .num_dapm_routes = ARRAY_SIZE(wm8955_dapm_routes), + .suspend_bias_off = 1, + .idle_bias_on = 1, + .use_pmdown_time = 1, + .endianness = 1, + .non_legacy_dai_naming = 1, }; static const struct regmap_config wm8955_regmap = { @@ -989,19 +990,12 @@ static int wm8955_i2c_probe(struct i2c_client *i2c, i2c_set_clientdata(i2c, wm8955); - ret = snd_soc_register_codec(&i2c->dev, - &soc_codec_dev_wm8955, &wm8955_dai, 1); + ret = devm_snd_soc_register_component(&i2c->dev, + &soc_component_dev_wm8955, &wm8955_dai, 1); return ret; } -static int wm8955_i2c_remove(struct i2c_client *client) -{ - snd_soc_unregister_codec(&client->dev); - - return 0; -} - static const struct i2c_device_id wm8955_i2c_id[] = { { "wm8955", 0 }, { } @@ -1013,7 +1007,6 @@ static struct i2c_driver wm8955_i2c_driver = { .name = "wm8955", }, .probe = wm8955_i2c_probe, - .remove = wm8955_i2c_remove, .id_table = wm8955_i2c_id, }; -- cgit v1.2.3