From 5d81296b5e7849ba3bcc5bf430ffd37bf67ff7dc Mon Sep 17 00:00:00 2001 From: Andrej Krutak Date: Mon, 6 Feb 2017 20:34:58 +0100 Subject: ALSA: line6: Always setup isochronous transfer properties While not all line6 devices currently support PCM, it causes no harm to 'have it prepared'. This also fixes toneport, which only has PCM - in which case we previously skipped the USB transfer properties detection completely. Signed-off-by: Andrej Krutak Signed-off-by: Takashi Iwai --- sound/usb/line6/driver.c | 48 ++++++++++++++++++++++++++---------------------- 1 file changed, 26 insertions(+), 22 deletions(-) (limited to 'sound') diff --git a/sound/usb/line6/driver.c b/sound/usb/line6/driver.c index ab3c280a23d1..0ff5a7d2e19f 100644 --- a/sound/usb/line6/driver.c +++ b/sound/usb/line6/driver.c @@ -492,42 +492,46 @@ static void line6_destruct(struct snd_card *card) usb_put_dev(usbdev); } -/* get data from endpoint descriptor (see usb_maxpacket): */ -static void line6_get_interval(struct usb_line6 *line6) +static void line6_get_usb_properties(struct usb_line6 *line6) { struct usb_device *usbdev = line6->usbdev; const struct line6_properties *properties = line6->properties; int pipe; - struct usb_host_endpoint *ep; + struct usb_host_endpoint *ep = NULL; - if (properties->capabilities & LINE6_CAP_CONTROL_MIDI) { - pipe = - usb_rcvintpipe(line6->usbdev, line6->properties->ep_ctrl_r); - } else { - pipe = - usb_rcvbulkpipe(line6->usbdev, line6->properties->ep_ctrl_r); + if (properties->capabilities & LINE6_CAP_CONTROL) { + if (properties->capabilities & LINE6_CAP_CONTROL_MIDI) { + pipe = usb_rcvintpipe(line6->usbdev, + line6->properties->ep_ctrl_r); + } else { + pipe = usb_rcvbulkpipe(line6->usbdev, + line6->properties->ep_ctrl_r); + } + ep = usbdev->ep_in[usb_pipeendpoint(pipe)]; } - ep = usbdev->ep_in[usb_pipeendpoint(pipe)]; + /* Control data transfer properties */ if (ep) { line6->interval = ep->desc.bInterval; - if (usbdev->speed == USB_SPEED_LOW) { - line6->intervals_per_second = USB_LOW_INTERVALS_PER_SECOND; - line6->iso_buffers = USB_LOW_ISO_BUFFERS; - } else { - line6->intervals_per_second = USB_HIGH_INTERVALS_PER_SECOND; - line6->iso_buffers = USB_HIGH_ISO_BUFFERS; - } - line6->max_packet_size = le16_to_cpu(ep->desc.wMaxPacketSize); } else { - dev_err(line6->ifcdev, - "endpoint not available, using fallback values"); + if (properties->capabilities & LINE6_CAP_CONTROL) { + dev_err(line6->ifcdev, + "endpoint not available, using fallback values"); + } line6->interval = LINE6_FALLBACK_INTERVAL; line6->max_packet_size = LINE6_FALLBACK_MAXPACKETSIZE; } -} + /* Isochronous transfer properties */ + if (usbdev->speed == USB_SPEED_LOW) { + line6->intervals_per_second = USB_LOW_INTERVALS_PER_SECOND; + line6->iso_buffers = USB_LOW_ISO_BUFFERS; + } else { + line6->intervals_per_second = USB_HIGH_INTERVALS_PER_SECOND; + line6->iso_buffers = USB_HIGH_ISO_BUFFERS; + } +} /* Enable buffering of incoming messages, flush the buffer */ static int line6_hwdep_open(struct snd_hwdep *hw, struct file *file) @@ -754,7 +758,7 @@ int line6_probe(struct usb_interface *interface, goto error; } - line6_get_interval(line6); + line6_get_usb_properties(line6); if (properties->capabilities & LINE6_CAP_CONTROL) { ret = line6_init_cap_control(line6); -- cgit v1.2.3