From e15c1c1f3f903f679c9782b540f9d52c80c99610 Mon Sep 17 00:00:00 2001 From: Dominik Brodowski Date: Sat, 28 Nov 2009 18:12:06 +0100 Subject: pcmcia: remove unused IRQ_FIRST_SHARED Komuro pointed out that IRQ_FIRST_SHARED is not used at all in the PCMCIA subsystem, so remove it. Also, remove two bogus assignments. CC: Karsten Keil CC: netdev@vger.kernel.org CC: alsa-devel@alsa-project.org CC: Komuro Signed-off-by: Dominik Brodowski --- sound/pcmcia/pdaudiocf/pdaudiocf.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'sound') diff --git a/sound/pcmcia/pdaudiocf/pdaudiocf.c b/sound/pcmcia/pdaudiocf/pdaudiocf.c index 7717e01fc071..edaa729126bb 100644 --- a/sound/pcmcia/pdaudiocf/pdaudiocf.c +++ b/sound/pcmcia/pdaudiocf/pdaudiocf.c @@ -143,7 +143,8 @@ static int snd_pdacf_probe(struct pcmcia_device *link) link->io.NumPorts1 = 16; link->irq.Attributes = IRQ_TYPE_EXCLUSIVE | IRQ_FORCED_PULSE; - // link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING|IRQ_FIRST_SHARED; + /* FIXME: This driver should be updated to allow for dynamic IRQ sharing */ + /* link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING | IRQ_FORCED_PULSE; */ link->irq.Handler = pdacf_interrupt; link->conf.Attributes = CONF_ENABLE_IRQ; -- cgit v1.2.3 From 5a65edbc12b6b34ef912114f1fc8215786f85b25 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Wed, 4 Nov 2009 16:10:51 +0000 Subject: mfd: Convert wm8350 IRQ handlers to irq_handler_t This is done as simple code transformation, the semantics of the IRQ API provided by the core are are still very different to those of genirq (mainly with regard to masking). Signed-off-by: Mark Brown Signed-off-by: Samuel Ortiz --- drivers/mfd/wm8350-irq.c | 6 +++--- drivers/power/wm8350_power.c | 39 +++++++++++++++++++++++------------- drivers/regulator/wm8350-regulator.c | 7 +++++-- drivers/rtc/rtc-wm8350.c | 18 +++++++++++------ include/linux/mfd/wm8350/core.h | 8 ++++---- sound/soc/codecs/wm8350.c | 15 +++++++++----- 6 files changed, 59 insertions(+), 34 deletions(-) (limited to 'sound') diff --git a/drivers/mfd/wm8350-irq.c b/drivers/mfd/wm8350-irq.c index d9abfc94c685..2ea2b8b4c72a 100644 --- a/drivers/mfd/wm8350-irq.c +++ b/drivers/mfd/wm8350-irq.c @@ -371,7 +371,7 @@ static void wm8350_irq_call_handler(struct wm8350 *wm8350, int irq) mutex_lock(&wm8350->irq_mutex); if (wm8350->irq[irq].handler) - wm8350->irq[irq].handler(wm8350, irq, wm8350->irq[irq].data); + wm8350->irq[irq].handler(irq, wm8350->irq[irq].data); else { dev_err(wm8350->dev, "irq %d nobody cared. now masked.\n", irq); @@ -431,8 +431,8 @@ static irqreturn_t wm8350_irq(int irq, void *irq_data) } int wm8350_register_irq(struct wm8350 *wm8350, int irq, - void (*handler) (struct wm8350 *, int, void *), - void *data) + irq_handler_t handler, unsigned long flags, + const char *name, void *data) { if (irq < 0 || irq > WM8350_NUM_IRQ || !handler) return -EINVAL; diff --git a/drivers/power/wm8350_power.c b/drivers/power/wm8350_power.c index 28b0299c0043..6e634cf7fc14 100644 --- a/drivers/power/wm8350_power.c +++ b/drivers/power/wm8350_power.c @@ -184,8 +184,9 @@ static ssize_t charger_state_show(struct device *dev, static DEVICE_ATTR(charger_state, 0444, charger_state_show, NULL); -static void wm8350_charger_handler(struct wm8350 *wm8350, int irq, void *data) +static irqreturn_t wm8350_charger_handler(int irq, void *data) { + struct wm8350 *wm8350 = data; struct wm8350_power *power = &wm8350->power; struct wm8350_charger_policy *policy = power->policy; @@ -238,6 +239,8 @@ static void wm8350_charger_handler(struct wm8350 *wm8350, int irq, void *data) default: dev_err(wm8350->dev, "Unknown interrupt %d\n", irq); } + + return IRQ_HANDLED; } /********************************************************************* @@ -387,45 +390,53 @@ static void wm8350_init_charger(struct wm8350 *wm8350) { /* register our interest in charger events */ wm8350_register_irq(wm8350, WM8350_IRQ_CHG_BAT_HOT, - wm8350_charger_handler, NULL); + wm8350_charger_handler, 0, "Battery hot", wm8350); wm8350_unmask_irq(wm8350, WM8350_IRQ_CHG_BAT_HOT); wm8350_register_irq(wm8350, WM8350_IRQ_CHG_BAT_COLD, - wm8350_charger_handler, NULL); + wm8350_charger_handler, 0, "Battery cold", wm8350); wm8350_unmask_irq(wm8350, WM8350_IRQ_CHG_BAT_COLD); wm8350_register_irq(wm8350, WM8350_IRQ_CHG_BAT_FAIL, - wm8350_charger_handler, NULL); + wm8350_charger_handler, 0, "Battery fail", wm8350); wm8350_unmask_irq(wm8350, WM8350_IRQ_CHG_BAT_FAIL); wm8350_register_irq(wm8350, WM8350_IRQ_CHG_TO, - wm8350_charger_handler, NULL); + wm8350_charger_handler, 0, + "Charger timeout", wm8350); wm8350_unmask_irq(wm8350, WM8350_IRQ_CHG_TO); wm8350_register_irq(wm8350, WM8350_IRQ_CHG_END, - wm8350_charger_handler, NULL); + wm8350_charger_handler, 0, + "Charge end", wm8350); wm8350_unmask_irq(wm8350, WM8350_IRQ_CHG_END); wm8350_register_irq(wm8350, WM8350_IRQ_CHG_START, - wm8350_charger_handler, NULL); + wm8350_charger_handler, 0, + "Charge start", wm8350); wm8350_unmask_irq(wm8350, WM8350_IRQ_CHG_START); wm8350_register_irq(wm8350, WM8350_IRQ_CHG_FAST_RDY, - wm8350_charger_handler, NULL); + wm8350_charger_handler, 0, + "Fast charge ready", wm8350); wm8350_unmask_irq(wm8350, WM8350_IRQ_CHG_FAST_RDY); wm8350_register_irq(wm8350, WM8350_IRQ_CHG_VBATT_LT_3P9, - wm8350_charger_handler, NULL); + wm8350_charger_handler, 0, + "Battery <3.9V", wm8350); wm8350_unmask_irq(wm8350, WM8350_IRQ_CHG_VBATT_LT_3P9); wm8350_register_irq(wm8350, WM8350_IRQ_CHG_VBATT_LT_3P1, - wm8350_charger_handler, NULL); + wm8350_charger_handler, 0, + "Battery <3.1V", wm8350); wm8350_unmask_irq(wm8350, WM8350_IRQ_CHG_VBATT_LT_3P1); wm8350_register_irq(wm8350, WM8350_IRQ_CHG_VBATT_LT_2P85, - wm8350_charger_handler, NULL); + wm8350_charger_handler, 0, + "Battery <2.85V", wm8350); + wm8350_unmask_irq(wm8350, WM8350_IRQ_CHG_VBATT_LT_2P85); /* and supply change events */ wm8350_register_irq(wm8350, WM8350_IRQ_EXT_USB_FB, - wm8350_charger_handler, NULL); + wm8350_charger_handler, 0, "USB", wm8350); wm8350_unmask_irq(wm8350, WM8350_IRQ_EXT_USB_FB); wm8350_register_irq(wm8350, WM8350_IRQ_EXT_WALL_FB, - wm8350_charger_handler, NULL); + wm8350_charger_handler, 0, "Wall", wm8350); wm8350_unmask_irq(wm8350, WM8350_IRQ_EXT_WALL_FB); wm8350_register_irq(wm8350, WM8350_IRQ_EXT_BAT_FB, - wm8350_charger_handler, NULL); + wm8350_charger_handler, 0, "Battery", wm8350); wm8350_unmask_irq(wm8350, WM8350_IRQ_EXT_BAT_FB); } diff --git a/drivers/regulator/wm8350-regulator.c b/drivers/regulator/wm8350-regulator.c index 768bd0e5b48b..8c289fd4add2 100644 --- a/drivers/regulator/wm8350-regulator.c +++ b/drivers/regulator/wm8350-regulator.c @@ -1330,9 +1330,10 @@ static struct regulator_desc wm8350_reg[NUM_WM8350_REGULATORS] = { }, }; -static void pmic_uv_handler(struct wm8350 *wm8350, int irq, void *data) +static irqreturn_t pmic_uv_handler(int irq, void *data) { struct regulator_dev *rdev = (struct regulator_dev *)data; + struct wm8350 *wm8350 = rdev_get_drvdata(rdev); mutex_lock(&rdev->mutex); if (irq == WM8350_IRQ_CS1 || irq == WM8350_IRQ_CS2) @@ -1344,6 +1345,8 @@ static void pmic_uv_handler(struct wm8350 *wm8350, int irq, void *data) REGULATOR_EVENT_UNDER_VOLTAGE, wm8350); mutex_unlock(&rdev->mutex); + + return IRQ_HANDLED; } static int wm8350_regulator_probe(struct platform_device *pdev) @@ -1388,7 +1391,7 @@ static int wm8350_regulator_probe(struct platform_device *pdev) /* register regulator IRQ */ ret = wm8350_register_irq(wm8350, wm8350_reg[pdev->id].irq, - pmic_uv_handler, rdev); + pmic_uv_handler, 0, "UV", rdev); if (ret < 0) { regulator_unregister(rdev); dev_err(&pdev->dev, "failed to register regulator %s IRQ\n", diff --git a/drivers/rtc/rtc-wm8350.c b/drivers/rtc/rtc-wm8350.c index c91edc572eb6..56e56e552813 100644 --- a/drivers/rtc/rtc-wm8350.c +++ b/drivers/rtc/rtc-wm8350.c @@ -315,9 +315,9 @@ static int wm8350_rtc_update_irq_enable(struct device *dev, return 0; } -static void wm8350_rtc_alarm_handler(struct wm8350 *wm8350, int irq, - void *data) +static irqreturn_t wm8350_rtc_alarm_handler(int irq, void *data) { + struct wm8350 *wm8350 = data; struct rtc_device *rtc = wm8350->rtc.rtc; int ret; @@ -330,14 +330,18 @@ static void wm8350_rtc_alarm_handler(struct wm8350 *wm8350, int irq, dev_err(&(wm8350->rtc.pdev->dev), "Failed to disable alarm: %d\n", ret); } + + return IRQ_HANDLED; } -static void wm8350_rtc_update_handler(struct wm8350 *wm8350, int irq, - void *data) +static irqreturn_t wm8350_rtc_update_handler(int irq, void *data) { + struct wm8350 *wm8350 = data; struct rtc_device *rtc = wm8350->rtc.rtc; rtc_update_irq(rtc, 1, RTC_IRQF | RTC_UF); + + return IRQ_HANDLED; } static const struct rtc_class_ops wm8350_rtc_ops = { @@ -459,10 +463,12 @@ static int wm8350_rtc_probe(struct platform_device *pdev) wm8350_mask_irq(wm8350, WM8350_IRQ_RTC_PER); wm8350_register_irq(wm8350, WM8350_IRQ_RTC_SEC, - wm8350_rtc_update_handler, NULL); + wm8350_rtc_update_handler, 0, + "RTC Seconds", wm8350); wm8350_register_irq(wm8350, WM8350_IRQ_RTC_ALM, - wm8350_rtc_alarm_handler, NULL); + wm8350_rtc_alarm_handler, 0, + "RTC Alarm", wm8350); wm8350_unmask_irq(wm8350, WM8350_IRQ_RTC_ALM); return 0; diff --git a/include/linux/mfd/wm8350/core.h b/include/linux/mfd/wm8350/core.h index ffce508a9109..43868899bf49 100644 --- a/include/linux/mfd/wm8350/core.h +++ b/include/linux/mfd/wm8350/core.h @@ -15,7 +15,7 @@ #include #include -#include +#include #include #include @@ -601,7 +601,7 @@ extern const u16 wm8352_mode3_defaults[]; struct wm8350; struct wm8350_irq { - void (*handler) (struct wm8350 *, int, void *); + irq_handler_t handler; void *data; }; @@ -678,8 +678,8 @@ int wm8350_block_write(struct wm8350 *wm8350, int reg, int size, u16 *src); * WM8350 internal interrupts */ int wm8350_register_irq(struct wm8350 *wm8350, int irq, - void (*handler) (struct wm8350 *, int, void *), - void *data); + irq_handler_t handler, unsigned long flags, + const char *name, void *data); int wm8350_free_irq(struct wm8350 *wm8350, int irq); int wm8350_mask_irq(struct wm8350 *wm8350, int irq); int wm8350_unmask_irq(struct wm8350 *wm8350, int irq); diff --git a/sound/soc/codecs/wm8350.c b/sound/soc/codecs/wm8350.c index f82125d9e85a..17a327d67fd5 100644 --- a/sound/soc/codecs/wm8350.c +++ b/sound/soc/codecs/wm8350.c @@ -1340,9 +1340,10 @@ static int wm8350_resume(struct platform_device *pdev) return 0; } -static void wm8350_hp_jack_handler(struct wm8350 *wm8350, int irq, void *data) +static irqreturn_t wm8350_hp_jack_handler(int irq, void *data) { struct wm8350_data *priv = data; + struct wm8350 *wm8350 = priv->codec.control_data; u16 reg; int report; int mask; @@ -1365,7 +1366,7 @@ static void wm8350_hp_jack_handler(struct wm8350 *wm8350, int irq, void *data) if (!jack->jack) { dev_warn(wm8350->dev, "Jack interrupt called with no jack\n"); - return; + return IRQ_NONE; } /* Debounce */ @@ -1378,6 +1379,8 @@ static void wm8350_hp_jack_handler(struct wm8350 *wm8350, int irq, void *data) report = 0; snd_soc_jack_report(jack->jack, report, jack->report); + + return IRQ_HANDLED; } /** @@ -1421,7 +1424,7 @@ int wm8350_hp_jack_detect(struct snd_soc_codec *codec, enum wm8350_jack which, wm8350_set_bits(wm8350, WM8350_JACK_DETECT, ena); /* Sync status */ - wm8350_hp_jack_handler(wm8350, irq, priv); + wm8350_hp_jack_handler(irq, priv); wm8350_unmask_irq(wm8350, irq); @@ -1485,9 +1488,11 @@ static int wm8350_probe(struct platform_device *pdev) wm8350_mask_irq(wm8350, WM8350_IRQ_CODEC_JCK_DET_L); wm8350_mask_irq(wm8350, WM8350_IRQ_CODEC_JCK_DET_R); wm8350_register_irq(wm8350, WM8350_IRQ_CODEC_JCK_DET_L, - wm8350_hp_jack_handler, priv); + wm8350_hp_jack_handler, 0, "Left jack detect", + priv); wm8350_register_irq(wm8350, WM8350_IRQ_CODEC_JCK_DET_R, - wm8350_hp_jack_handler, priv); + wm8350_hp_jack_handler, 0, "Right jack detect", + priv); ret = snd_soc_new_pcms(socdev, SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1); if (ret < 0) { -- cgit v1.2.3 From 6a6127462eb9096419fd4b3115ec5971d83a600f Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Wed, 4 Nov 2009 16:10:52 +0000 Subject: mfd: Mask and unmask wm8350 IRQs on request and free Bring the WM8350 IRQ API more in line with the generic IRQ API by masking and unmasking interrupts as they are requested and freed. This is mostly just a case of deleting the mask and unmask calls from the individual drivers. The RTC driver is changed to mask the periodic IRQ after requesting it rather than only unmasking the alarm IRQ. If the periodic IRQ fires in the period where it is reqested then there will be a spurious notification but there should be no serious consequences from this. The CODEC drive is changed to explicitly disable headphone jack detection prior to requesting the IRQs. This will avoid the IRQ firing with no jack set up. Signed-off-by: Mark Brown Signed-off-by: Samuel Ortiz --- drivers/mfd/wm8350-irq.c | 4 ++++ drivers/power/wm8350_power.c | 26 -------------------------- drivers/regulator/wm8350-regulator.c | 3 --- drivers/rtc/rtc-wm8350.c | 7 +------ sound/soc/codecs/wm8350.c | 10 ++++------ 5 files changed, 9 insertions(+), 41 deletions(-) (limited to 'sound') diff --git a/drivers/mfd/wm8350-irq.c b/drivers/mfd/wm8350-irq.c index 2ea2b8b4c72a..c8df547c4747 100644 --- a/drivers/mfd/wm8350-irq.c +++ b/drivers/mfd/wm8350-irq.c @@ -445,6 +445,8 @@ int wm8350_register_irq(struct wm8350 *wm8350, int irq, wm8350->irq[irq].data = data; mutex_unlock(&wm8350->irq_mutex); + wm8350_unmask_irq(wm8350, irq); + return 0; } EXPORT_SYMBOL_GPL(wm8350_register_irq); @@ -454,6 +456,8 @@ int wm8350_free_irq(struct wm8350 *wm8350, int irq) if (irq < 0 || irq > WM8350_NUM_IRQ) return -EINVAL; + wm8350_mask_irq(wm8350, irq); + mutex_lock(&wm8350->irq_mutex); wm8350->irq[irq].handler = NULL; mutex_unlock(&wm8350->irq_mutex); diff --git a/drivers/power/wm8350_power.c b/drivers/power/wm8350_power.c index 6e634cf7fc14..ad4f071e1287 100644 --- a/drivers/power/wm8350_power.c +++ b/drivers/power/wm8350_power.c @@ -391,80 +391,54 @@ static void wm8350_init_charger(struct wm8350 *wm8350) /* register our interest in charger events */ wm8350_register_irq(wm8350, WM8350_IRQ_CHG_BAT_HOT, wm8350_charger_handler, 0, "Battery hot", wm8350); - wm8350_unmask_irq(wm8350, WM8350_IRQ_CHG_BAT_HOT); wm8350_register_irq(wm8350, WM8350_IRQ_CHG_BAT_COLD, wm8350_charger_handler, 0, "Battery cold", wm8350); - wm8350_unmask_irq(wm8350, WM8350_IRQ_CHG_BAT_COLD); wm8350_register_irq(wm8350, WM8350_IRQ_CHG_BAT_FAIL, wm8350_charger_handler, 0, "Battery fail", wm8350); - wm8350_unmask_irq(wm8350, WM8350_IRQ_CHG_BAT_FAIL); wm8350_register_irq(wm8350, WM8350_IRQ_CHG_TO, wm8350_charger_handler, 0, "Charger timeout", wm8350); - wm8350_unmask_irq(wm8350, WM8350_IRQ_CHG_TO); wm8350_register_irq(wm8350, WM8350_IRQ_CHG_END, wm8350_charger_handler, 0, "Charge end", wm8350); - wm8350_unmask_irq(wm8350, WM8350_IRQ_CHG_END); wm8350_register_irq(wm8350, WM8350_IRQ_CHG_START, wm8350_charger_handler, 0, "Charge start", wm8350); - wm8350_unmask_irq(wm8350, WM8350_IRQ_CHG_START); wm8350_register_irq(wm8350, WM8350_IRQ_CHG_FAST_RDY, wm8350_charger_handler, 0, "Fast charge ready", wm8350); - wm8350_unmask_irq(wm8350, WM8350_IRQ_CHG_FAST_RDY); wm8350_register_irq(wm8350, WM8350_IRQ_CHG_VBATT_LT_3P9, wm8350_charger_handler, 0, "Battery <3.9V", wm8350); - wm8350_unmask_irq(wm8350, WM8350_IRQ_CHG_VBATT_LT_3P9); wm8350_register_irq(wm8350, WM8350_IRQ_CHG_VBATT_LT_3P1, wm8350_charger_handler, 0, "Battery <3.1V", wm8350); - wm8350_unmask_irq(wm8350, WM8350_IRQ_CHG_VBATT_LT_3P1); wm8350_register_irq(wm8350, WM8350_IRQ_CHG_VBATT_LT_2P85, wm8350_charger_handler, 0, "Battery <2.85V", wm8350); - wm8350_unmask_irq(wm8350, WM8350_IRQ_CHG_VBATT_LT_2P85); - /* and supply change events */ wm8350_register_irq(wm8350, WM8350_IRQ_EXT_USB_FB, wm8350_charger_handler, 0, "USB", wm8350); - wm8350_unmask_irq(wm8350, WM8350_IRQ_EXT_USB_FB); wm8350_register_irq(wm8350, WM8350_IRQ_EXT_WALL_FB, wm8350_charger_handler, 0, "Wall", wm8350); - wm8350_unmask_irq(wm8350, WM8350_IRQ_EXT_WALL_FB); wm8350_register_irq(wm8350, WM8350_IRQ_EXT_BAT_FB, wm8350_charger_handler, 0, "Battery", wm8350); - wm8350_unmask_irq(wm8350, WM8350_IRQ_EXT_BAT_FB); } static void free_charger_irq(struct wm8350 *wm8350) { - wm8350_mask_irq(wm8350, WM8350_IRQ_CHG_BAT_HOT); wm8350_free_irq(wm8350, WM8350_IRQ_CHG_BAT_HOT); - wm8350_mask_irq(wm8350, WM8350_IRQ_CHG_BAT_COLD); wm8350_free_irq(wm8350, WM8350_IRQ_CHG_BAT_COLD); - wm8350_mask_irq(wm8350, WM8350_IRQ_CHG_BAT_FAIL); wm8350_free_irq(wm8350, WM8350_IRQ_CHG_BAT_FAIL); - wm8350_mask_irq(wm8350, WM8350_IRQ_CHG_TO); wm8350_free_irq(wm8350, WM8350_IRQ_CHG_TO); - wm8350_mask_irq(wm8350, WM8350_IRQ_CHG_END); wm8350_free_irq(wm8350, WM8350_IRQ_CHG_END); - wm8350_mask_irq(wm8350, WM8350_IRQ_CHG_START); wm8350_free_irq(wm8350, WM8350_IRQ_CHG_START); - wm8350_mask_irq(wm8350, WM8350_IRQ_CHG_VBATT_LT_3P9); wm8350_free_irq(wm8350, WM8350_IRQ_CHG_VBATT_LT_3P9); - wm8350_mask_irq(wm8350, WM8350_IRQ_CHG_VBATT_LT_3P1); wm8350_free_irq(wm8350, WM8350_IRQ_CHG_VBATT_LT_3P1); - wm8350_mask_irq(wm8350, WM8350_IRQ_CHG_VBATT_LT_2P85); wm8350_free_irq(wm8350, WM8350_IRQ_CHG_VBATT_LT_2P85); - wm8350_mask_irq(wm8350, WM8350_IRQ_EXT_USB_FB); wm8350_free_irq(wm8350, WM8350_IRQ_EXT_USB_FB); - wm8350_mask_irq(wm8350, WM8350_IRQ_EXT_WALL_FB); wm8350_free_irq(wm8350, WM8350_IRQ_EXT_WALL_FB); - wm8350_mask_irq(wm8350, WM8350_IRQ_EXT_BAT_FB); wm8350_free_irq(wm8350, WM8350_IRQ_EXT_BAT_FB); } diff --git a/drivers/regulator/wm8350-regulator.c b/drivers/regulator/wm8350-regulator.c index 8c289fd4add2..1bbff099a546 100644 --- a/drivers/regulator/wm8350-regulator.c +++ b/drivers/regulator/wm8350-regulator.c @@ -1399,8 +1399,6 @@ static int wm8350_regulator_probe(struct platform_device *pdev) return ret; } - wm8350_unmask_irq(wm8350, wm8350_reg[pdev->id].irq); - return 0; } @@ -1409,7 +1407,6 @@ static int wm8350_regulator_remove(struct platform_device *pdev) struct regulator_dev *rdev = platform_get_drvdata(pdev); struct wm8350 *wm8350 = rdev_get_drvdata(rdev); - wm8350_mask_irq(wm8350, wm8350_reg[pdev->id].irq); wm8350_free_irq(wm8350, wm8350_reg[pdev->id].irq); regulator_unregister(rdev); diff --git a/drivers/rtc/rtc-wm8350.c b/drivers/rtc/rtc-wm8350.c index 56e56e552813..f16486635a8e 100644 --- a/drivers/rtc/rtc-wm8350.c +++ b/drivers/rtc/rtc-wm8350.c @@ -459,17 +459,14 @@ static int wm8350_rtc_probe(struct platform_device *pdev) return ret; } - wm8350_mask_irq(wm8350, WM8350_IRQ_RTC_SEC); - wm8350_mask_irq(wm8350, WM8350_IRQ_RTC_PER); - wm8350_register_irq(wm8350, WM8350_IRQ_RTC_SEC, wm8350_rtc_update_handler, 0, "RTC Seconds", wm8350); + wm8350_mask_irq(wm8350, WM8350_IRQ_RTC_SEC); wm8350_register_irq(wm8350, WM8350_IRQ_RTC_ALM, wm8350_rtc_alarm_handler, 0, "RTC Alarm", wm8350); - wm8350_unmask_irq(wm8350, WM8350_IRQ_RTC_ALM); return 0; } @@ -479,8 +476,6 @@ static int __devexit wm8350_rtc_remove(struct platform_device *pdev) struct wm8350 *wm8350 = platform_get_drvdata(pdev); struct wm8350_rtc *wm_rtc = &wm8350->rtc; - wm8350_mask_irq(wm8350, WM8350_IRQ_RTC_SEC); - wm8350_free_irq(wm8350, WM8350_IRQ_RTC_SEC); wm8350_free_irq(wm8350, WM8350_IRQ_RTC_ALM); diff --git a/sound/soc/codecs/wm8350.c b/sound/soc/codecs/wm8350.c index 17a327d67fd5..ebbf11b653a4 100644 --- a/sound/soc/codecs/wm8350.c +++ b/sound/soc/codecs/wm8350.c @@ -1426,8 +1426,6 @@ int wm8350_hp_jack_detect(struct snd_soc_codec *codec, enum wm8350_jack which, /* Sync status */ wm8350_hp_jack_handler(irq, priv); - wm8350_unmask_irq(wm8350, irq); - return 0; } EXPORT_SYMBOL_GPL(wm8350_hp_jack_detect); @@ -1485,8 +1483,10 @@ static int wm8350_probe(struct platform_device *pdev) wm8350_set_bits(wm8350, WM8350_ROUT2_VOLUME, WM8350_OUT2_VU | WM8350_OUT2R_MUTE); - wm8350_mask_irq(wm8350, WM8350_IRQ_CODEC_JCK_DET_L); - wm8350_mask_irq(wm8350, WM8350_IRQ_CODEC_JCK_DET_R); + /* Make sure jack detect is disabled to start off with */ + wm8350_clear_bits(wm8350, WM8350_JACK_DETECT, + WM8350_JDL_ENA | WM8350_JDR_ENA); + wm8350_register_irq(wm8350, WM8350_IRQ_CODEC_JCK_DET_L, wm8350_hp_jack_handler, 0, "Left jack detect", priv); @@ -1521,8 +1521,6 @@ static int wm8350_remove(struct platform_device *pdev) WM8350_JDL_ENA | WM8350_JDR_ENA); wm8350_clear_bits(wm8350, WM8350_POWER_MGMT_4, WM8350_TOCLK_ENA); - wm8350_mask_irq(wm8350, WM8350_IRQ_CODEC_JCK_DET_L); - wm8350_mask_irq(wm8350, WM8350_IRQ_CODEC_JCK_DET_R); wm8350_free_irq(wm8350, WM8350_IRQ_CODEC_JCK_DET_L); wm8350_free_irq(wm8350, WM8350_IRQ_CODEC_JCK_DET_R); -- cgit v1.2.3 From b07682b6056eb6701f8cb86aa5800e6f2ea7919b Mon Sep 17 00:00:00 2001 From: Santosh Shilimkar Date: Sun, 13 Dec 2009 20:05:51 +0100 Subject: mfd: Rename twl4030* driver files to enable re-use The upcoming TWL6030 is companion chip for OMAP4 like the current TWL4030 for OMAP3. The common modules like RTC, Regulator creates opportunity to re-use the most of the code from twl4030. This patch renames few common drivers twl4030* files to twl* to enable the code re-use. Signed-off-by: Rajendra Nayak Signed-off-by: Balaji T K Signed-off-by: Santosh Shilimkar Acked-by: Kevin Hilman Signed-off-by: Samuel Ortiz --- arch/arm/mach-omap2/board-2430sdp.c | 2 +- arch/arm/mach-omap2/board-3430sdp.c | 2 +- arch/arm/mach-omap2/board-ldp.c | 2 +- arch/arm/mach-omap2/board-omap3beagle.c | 2 +- arch/arm/mach-omap2/board-omap3pandora.c | 2 +- arch/arm/mach-omap2/board-overo.c | 2 +- drivers/gpio/twl4030-gpio.c | 2 +- drivers/input/keyboard/twl4030_keypad.c | 2 +- drivers/input/misc/twl4030-pwrbutton.c | 2 +- drivers/mfd/Makefile | 2 +- drivers/mfd/twl-core.c | 929 +++++++++++++++++++++++++++++++ drivers/mfd/twl4030-core.c | 929 ------------------------------- drivers/mfd/twl4030-irq.c | 2 +- drivers/mfd/twl4030-power.c | 2 +- drivers/regulator/Makefile | 2 +- drivers/regulator/twl-regulator.c | 500 +++++++++++++++++ drivers/regulator/twl4030-regulator.c | 500 ----------------- drivers/rtc/Makefile | 2 +- drivers/rtc/rtc-twl.c | 540 ++++++++++++++++++ drivers/rtc/rtc-twl4030.c | 540 ------------------ drivers/usb/otg/twl4030-usb.c | 2 +- drivers/video/omap/lcd_2430sdp.c | 2 +- drivers/watchdog/twl4030_wdt.c | 2 +- include/linux/i2c/twl.h | 550 ++++++++++++++++++ include/linux/i2c/twl4030.h | 550 ------------------ sound/soc/codecs/twl4030.c | 2 +- 26 files changed, 2537 insertions(+), 2537 deletions(-) create mode 100644 drivers/mfd/twl-core.c delete mode 100644 drivers/mfd/twl4030-core.c create mode 100644 drivers/regulator/twl-regulator.c delete mode 100644 drivers/regulator/twl4030-regulator.c create mode 100644 drivers/rtc/rtc-twl.c delete mode 100644 drivers/rtc/rtc-twl4030.c create mode 100644 include/linux/i2c/twl.h delete mode 100644 include/linux/i2c/twl4030.h (limited to 'sound') diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c index db9374bc528b..e508904fb67e 100644 --- a/arch/arm/mach-omap2/board-2430sdp.c +++ b/arch/arm/mach-omap2/board-2430sdp.c @@ -19,7 +19,7 @@ #include #include #include -#include +#include #include #include #include diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c index 4cfb7b68dfad..c90b0d0b1927 100644 --- a/arch/arm/mach-omap2/board-3430sdp.c +++ b/arch/arm/mach-omap2/board-3430sdp.c @@ -20,7 +20,7 @@ #include #include #include -#include +#include #include #include #include diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c index 37431738f1c2..995d4a2b2dfd 100644 --- a/arch/arm/mach-omap2/board-ldp.c +++ b/arch/arm/mach-omap2/board-ldp.c @@ -24,7 +24,7 @@ #include #include #include -#include +#include #include #include diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c index 6ada8029f9a8..231cb4ec1847 100644 --- a/arch/arm/mach-omap2/board-omap3beagle.c +++ b/arch/arm/mach-omap2/board-omap3beagle.c @@ -29,7 +29,7 @@ #include #include -#include +#include #include #include diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c index 6f6c601eeab7..ef17cf1ab6d7 100644 --- a/arch/arm/mach-omap2/board-omap3pandora.c +++ b/arch/arm/mach-omap2/board-omap3pandora.c @@ -24,7 +24,7 @@ #include #include #include -#include +#include #include #include #include diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c index 5b78a87217e0..d192dd98a591 100644 --- a/arch/arm/mach-omap2/board-overo.c +++ b/arch/arm/mach-omap2/board-overo.c @@ -26,7 +26,7 @@ #include #include #include -#include +#include #include #include diff --git a/drivers/gpio/twl4030-gpio.c b/drivers/gpio/twl4030-gpio.c index 49384a7c5492..a320d7bfe67c 100644 --- a/drivers/gpio/twl4030-gpio.c +++ b/drivers/gpio/twl4030-gpio.c @@ -34,7 +34,7 @@ #include #include -#include +#include /* diff --git a/drivers/input/keyboard/twl4030_keypad.c b/drivers/input/keyboard/twl4030_keypad.c index 9a2977c21696..1d1536a2fe46 100644 --- a/drivers/input/keyboard/twl4030_keypad.c +++ b/drivers/input/keyboard/twl4030_keypad.c @@ -31,7 +31,7 @@ #include #include #include -#include +#include /* diff --git a/drivers/input/misc/twl4030-pwrbutton.c b/drivers/input/misc/twl4030-pwrbutton.c index f5fc9974a111..a73b889fff79 100644 --- a/drivers/input/misc/twl4030-pwrbutton.c +++ b/drivers/input/misc/twl4030-pwrbutton.c @@ -27,7 +27,7 @@ #include #include #include -#include +#include #define PWR_PWRON_IRQ (1 << 0) diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile index 75638ca8288b..f4d14b7589bf 100644 --- a/drivers/mfd/Makefile +++ b/drivers/mfd/Makefile @@ -26,7 +26,7 @@ obj-$(CONFIG_MFD_WM8350_I2C) += wm8350-i2c.o obj-$(CONFIG_TPS65010) += tps65010.o obj-$(CONFIG_MENELAUS) += menelaus.o -obj-$(CONFIG_TWL4030_CORE) += twl4030-core.o twl4030-irq.o +obj-$(CONFIG_TWL4030_CORE) += twl-core.o twl4030-irq.o obj-$(CONFIG_TWL4030_POWER) += twl4030-power.o obj-$(CONFIG_TWL4030_CODEC) += twl4030-codec.o diff --git a/drivers/mfd/twl-core.c b/drivers/mfd/twl-core.c new file mode 100644 index 000000000000..44714f5cf495 --- /dev/null +++ b/drivers/mfd/twl-core.c @@ -0,0 +1,929 @@ +/* + * twl4030_core.c - driver for TWL4030/TPS659x0 PM and audio CODEC devices + * + * Copyright (C) 2005-2006 Texas Instruments, Inc. + * + * Modifications to defer interrupt handling to a kernel thread: + * Copyright (C) 2006 MontaVista Software, Inc. + * + * Based on tlv320aic23.c: + * Copyright (c) by Kai Svahn + * + * Code cleanup and modifications to IRQ handler. + * by syed khasim + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include + +#include + +#include +#include + +#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) +#include +#endif + +/* + * The TWL4030 "Triton 2" is one of a family of a multi-function "Power + * Management and System Companion Device" chips originally designed for + * use in OMAP2 and OMAP 3 based systems. Its control interfaces use I2C, + * often at around 3 Mbit/sec, including for interrupt handling. + * + * This driver core provides genirq support for the interrupts emitted, + * by the various modules, and exports register access primitives. + * + * FIXME this driver currently requires use of the first interrupt line + * (and associated registers). + */ + +#define DRIVER_NAME "twl4030" + +#if defined(CONFIG_TWL4030_BCI_BATTERY) || \ + defined(CONFIG_TWL4030_BCI_BATTERY_MODULE) +#define twl_has_bci() true +#else +#define twl_has_bci() false +#endif + +#if defined(CONFIG_KEYBOARD_TWL4030) || defined(CONFIG_KEYBOARD_TWL4030_MODULE) +#define twl_has_keypad() true +#else +#define twl_has_keypad() false +#endif + +#if defined(CONFIG_GPIO_TWL4030) || defined(CONFIG_GPIO_TWL4030_MODULE) +#define twl_has_gpio() true +#else +#define twl_has_gpio() false +#endif + +#if defined(CONFIG_REGULATOR_TWL4030) \ + || defined(CONFIG_REGULATOR_TWL4030_MODULE) +#define twl_has_regulator() true +#else +#define twl_has_regulator() false +#endif + +#if defined(CONFIG_TWL4030_MADC) || defined(CONFIG_TWL4030_MADC_MODULE) +#define twl_has_madc() true +#else +#define twl_has_madc() false +#endif + +#ifdef CONFIG_TWL4030_POWER +#define twl_has_power() true +#else +#define twl_has_power() false +#endif + +#if defined(CONFIG_RTC_DRV_TWL4030) || defined(CONFIG_RTC_DRV_TWL4030_MODULE) +#define twl_has_rtc() true +#else +#define twl_has_rtc() false +#endif + +#if defined(CONFIG_TWL4030_USB) || defined(CONFIG_TWL4030_USB_MODULE) +#define twl_has_usb() true +#else +#define twl_has_usb() false +#endif + +#if defined(CONFIG_TWL4030_WATCHDOG) || \ + defined(CONFIG_TWL4030_WATCHDOG_MODULE) +#define twl_has_watchdog() true +#else +#define twl_has_watchdog() false +#endif + +#if defined(CONFIG_TWL4030_CODEC) || defined(CONFIG_TWL4030_CODEC_MODULE) +#define twl_has_codec() true +#else +#define twl_has_codec() false +#endif + +/* Triton Core internal information (BEGIN) */ + +/* Last - for index max*/ +#define TWL4030_MODULE_LAST TWL4030_MODULE_SECURED_REG + +#define TWL4030_NUM_SLAVES 4 + +#if defined(CONFIG_INPUT_TWL4030_PWRBUTTON) \ + || defined(CONFIG_INPUT_TWL4030_PWBUTTON_MODULE) +#define twl_has_pwrbutton() true +#else +#define twl_has_pwrbutton() false +#endif + +/* Base Address defns for twl4030_map[] */ + +/* subchip/slave 0 - USB ID */ +#define TWL4030_BASEADD_USB 0x0000 + +/* subchip/slave 1 - AUD ID */ +#define TWL4030_BASEADD_AUDIO_VOICE 0x0000 +#define TWL4030_BASEADD_GPIO 0x0098 +#define TWL4030_BASEADD_INTBR 0x0085 +#define TWL4030_BASEADD_PIH 0x0080 +#define TWL4030_BASEADD_TEST 0x004C + +/* subchip/slave 2 - AUX ID */ +#define TWL4030_BASEADD_INTERRUPTS 0x00B9 +#define TWL4030_BASEADD_LED 0x00EE +#define TWL4030_BASEADD_MADC 0x0000 +#define TWL4030_BASEADD_MAIN_CHARGE 0x0074 +#define TWL4030_BASEADD_PRECHARGE 0x00AA +#define TWL4030_BASEADD_PWM0 0x00F8 +#define TWL4030_BASEADD_PWM1 0x00FB +#define TWL4030_BASEADD_PWMA 0x00EF +#define TWL4030_BASEADD_PWMB 0x00F1 +#define TWL4030_BASEADD_KEYPAD 0x00D2 + +#define TWL5031_BASEADD_ACCESSORY 0x0074 /* Replaces Main Charge */ +#define TWL5031_BASEADD_INTERRUPTS 0x00B9 /* Different than TWL4030's + one */ + +/* subchip/slave 3 - POWER ID */ +#define TWL4030_BASEADD_BACKUP 0x0014 +#define TWL4030_BASEADD_INT 0x002E +#define TWL4030_BASEADD_PM_MASTER 0x0036 +#define TWL4030_BASEADD_PM_RECEIVER 0x005B +#define TWL4030_BASEADD_RTC 0x001C +#define TWL4030_BASEADD_SECURED_REG 0x0000 + +/* Triton Core internal information (END) */ + + +/* Few power values */ +#define R_CFG_BOOT 0x05 +#define R_PROTECT_KEY 0x0E + +/* access control values for R_PROTECT_KEY */ +#define KEY_UNLOCK1 0xce +#define KEY_UNLOCK2 0xec +#define KEY_LOCK 0x00 + +/* some fields in R_CFG_BOOT */ +#define HFCLK_FREQ_19p2_MHZ (1 << 0) +#define HFCLK_FREQ_26_MHZ (2 << 0) +#define HFCLK_FREQ_38p4_MHZ (3 << 0) +#define HIGH_PERF_SQ (1 << 3) +#define CK32K_LOWPWR_EN (1 << 7) + + +/* chip-specific feature flags, for i2c_device_id.driver_data */ +#define TWL4030_VAUX2 BIT(0) /* pre-5030 voltage ranges */ +#define TPS_SUBSET BIT(1) /* tps659[23]0 have fewer LDOs */ +#define TWL5031 BIT(2) /* twl5031 has different registers */ + +/*----------------------------------------------------------------------*/ + +/* is driver active, bound to a chip? */ +static bool inuse; + +/* Structure for each TWL4030 Slave */ +struct twl4030_client { + struct i2c_client *client; + u8 address; + + /* max numb of i2c_msg required is for read =2 */ + struct i2c_msg xfer_msg[2]; + + /* To lock access to xfer_msg */ + struct mutex xfer_lock; +}; + +static struct twl4030_client twl4030_modules[TWL4030_NUM_SLAVES]; + + +/* mapping the module id to slave id and base address */ +struct twl4030mapping { + unsigned char sid; /* Slave ID */ + unsigned char base; /* base address */ +}; + +static struct twl4030mapping twl4030_map[TWL4030_MODULE_LAST + 1] = { + /* + * NOTE: don't change this table without updating the + * defines for TWL4030_MODULE_* + * so they continue to match the order in this table. + */ + + { 0, TWL4030_BASEADD_USB }, + + { 1, TWL4030_BASEADD_AUDIO_VOICE }, + { 1, TWL4030_BASEADD_GPIO }, + { 1, TWL4030_BASEADD_INTBR }, + { 1, TWL4030_BASEADD_PIH }, + { 1, TWL4030_BASEADD_TEST }, + + { 2, TWL4030_BASEADD_KEYPAD }, + { 2, TWL4030_BASEADD_MADC }, + { 2, TWL4030_BASEADD_INTERRUPTS }, + { 2, TWL4030_BASEADD_LED }, + { 2, TWL4030_BASEADD_MAIN_CHARGE }, + { 2, TWL4030_BASEADD_PRECHARGE }, + { 2, TWL4030_BASEADD_PWM0 }, + { 2, TWL4030_BASEADD_PWM1 }, + { 2, TWL4030_BASEADD_PWMA }, + { 2, TWL4030_BASEADD_PWMB }, + { 2, TWL5031_BASEADD_ACCESSORY }, + { 2, TWL5031_BASEADD_INTERRUPTS }, + + { 3, TWL4030_BASEADD_BACKUP }, + { 3, TWL4030_BASEADD_INT }, + { 3, TWL4030_BASEADD_PM_MASTER }, + { 3, TWL4030_BASEADD_PM_RECEIVER }, + { 3, TWL4030_BASEADD_RTC }, + { 3, TWL4030_BASEADD_SECURED_REG }, +}; + +/*----------------------------------------------------------------------*/ + +/* Exported Functions */ + +/** + * twl4030_i2c_write - Writes a n bit register in TWL4030 + * @mod_no: module number + * @value: an array of num_bytes+1 containing data to write + * @reg: register address (just offset will do) + * @num_bytes: number of bytes to transfer + * + * IMPORTANT: for 'value' parameter: Allocate value num_bytes+1 and + * valid data starts at Offset 1. + * + * Returns the result of operation - 0 is success + */ +int twl4030_i2c_write(u8 mod_no, u8 *value, u8 reg, unsigned num_bytes) +{ + int ret; + int sid; + struct twl4030_client *twl; + struct i2c_msg *msg; + + if (unlikely(mod_no > TWL4030_MODULE_LAST)) { + pr_err("%s: invalid module number %d\n", DRIVER_NAME, mod_no); + return -EPERM; + } + sid = twl4030_map[mod_no].sid; + twl = &twl4030_modules[sid]; + + if (unlikely(!inuse)) { + pr_err("%s: client %d is not initialized\n", DRIVER_NAME, sid); + return -EPERM; + } + mutex_lock(&twl->xfer_lock); + /* + * [MSG1]: fill the register address data + * fill the data Tx buffer + */ + msg = &twl->xfer_msg[0]; + msg->addr = twl->address; + msg->len = num_bytes + 1; + msg->flags = 0; + msg->buf = value; + /* over write the first byte of buffer with the register address */ + *value = twl4030_map[mod_no].base + reg; + ret = i2c_transfer(twl->client->adapter, twl->xfer_msg, 1); + mutex_unlock(&twl->xfer_lock); + + /* i2c_transfer returns number of messages transferred */ + if (ret != 1) { + pr_err("%s: i2c_write failed to transfer all messages\n", + DRIVER_NAME); + if (ret < 0) + return ret; + else + return -EIO; + } else { + return 0; + } +} +EXPORT_SYMBOL(twl4030_i2c_write); + +/** + * twl4030_i2c_read - Reads a n bit register in TWL4030 + * @mod_no: module number + * @value: an array of num_bytes containing data to be read + * @reg: register address (just offset will do) + * @num_bytes: number of bytes to transfer + * + * Returns result of operation - num_bytes is success else failure. + */ +int twl4030_i2c_read(u8 mod_no, u8 *value, u8 reg, unsigned num_bytes) +{ + int ret; + u8 val; + int sid; + struct twl4030_client *twl; + struct i2c_msg *msg; + + if (unlikely(mod_no > TWL4030_MODULE_LAST)) { + pr_err("%s: invalid module number %d\n", DRIVER_NAME, mod_no); + return -EPERM; + } + sid = twl4030_map[mod_no].sid; + twl = &twl4030_modules[sid]; + + if (unlikely(!inuse)) { + pr_err("%s: client %d is not initialized\n", DRIVER_NAME, sid); + return -EPERM; + } + mutex_lock(&twl->xfer_lock); + /* [MSG1] fill the register address data */ + msg = &twl->xfer_msg[0]; + msg->addr = twl->address; + msg->len = 1; + msg->flags = 0; /* Read the register value */ + val = twl4030_map[mod_no].base + reg; + msg->buf = &val; + /* [MSG2] fill the data rx buffer */ + msg = &twl->xfer_msg[1]; + msg->addr = twl->address; + msg->flags = I2C_M_RD; /* Read the register value */ + msg->len = num_bytes; /* only n bytes */ + msg->buf = value; + ret = i2c_transfer(twl->client->adapter, twl->xfer_msg, 2); + mutex_unlock(&twl->xfer_lock); + + /* i2c_transfer returns number of messages transferred */ + if (ret != 2) { + pr_err("%s: i2c_read failed to transfer all messages\n", + DRIVER_NAME); + if (ret < 0) + return ret; + else + return -EIO; + } else { + return 0; + } +} +EXPORT_SYMBOL(twl4030_i2c_read); + +/** + * twl4030_i2c_write_u8 - Writes a 8 bit register in TWL4030 + * @mod_no: module number + * @value: the value to be written 8 bit + * @reg: register address (just offset will do) + * + * Returns result of operation - 0 is success + */ +int twl4030_i2c_write_u8(u8 mod_no, u8 value, u8 reg) +{ + + /* 2 bytes offset 1 contains the data offset 0 is used by i2c_write */ + u8 temp_buffer[2] = { 0 }; + /* offset 1 contains the data */ + temp_buffer[1] = value; + return twl4030_i2c_write(mod_no, temp_buffer, reg, 1); +} +EXPORT_SYMBOL(twl4030_i2c_write_u8); + +/** + * twl4030_i2c_read_u8 - Reads a 8 bit register from TWL4030 + * @mod_no: module number + * @value: the value read 8 bit + * @reg: register address (just offset will do) + * + * Returns result of operation - 0 is success + */ +int twl4030_i2c_read_u8(u8 mod_no, u8 *value, u8 reg) +{ + return twl4030_i2c_read(mod_no, value, reg, 1); +} +EXPORT_SYMBOL(twl4030_i2c_read_u8); + +/*----------------------------------------------------------------------*/ + +static struct device * +add_numbered_child(unsigned chip, const char *name, int num, + void *pdata, unsigned pdata_len, + bool can_wakeup, int irq0, int irq1) +{ + struct platform_device *pdev; + struct twl4030_client *twl = &twl4030_modules[chip]; + int status; + + pdev = platform_device_alloc(name, num); + if (!pdev) { + dev_dbg(&twl->client->dev, "can't alloc dev\n"); + status = -ENOMEM; + goto err; + } + + device_init_wakeup(&pdev->dev, can_wakeup); + pdev->dev.parent = &twl->client->dev; + + if (pdata) { + status = platform_device_add_data(pdev, pdata, pdata_len); + if (status < 0) { + dev_dbg(&pdev->dev, "can't add platform_data\n"); + goto err; + } + } + + if (irq0) { + struct resource r[2] = { + { .start = irq0, .flags = IORESOURCE_IRQ, }, + { .start = irq1, .flags = IORESOURCE_IRQ, }, + }; + + status = platform_device_add_resources(pdev, r, irq1 ? 2 : 1); + if (status < 0) { + dev_dbg(&pdev->dev, "can't add irqs\n"); + goto err; + } + } + + status = platform_device_add(pdev); + +err: + if (status < 0) { + platform_device_put(pdev); + dev_err(&twl->client->dev, "can't add %s dev\n", name); + return ERR_PTR(status); + } + return &pdev->dev; +} + +static inline struct device *add_child(unsigned chip, const char *name, + void *pdata, unsigned pdata_len, + bool can_wakeup, int irq0, int irq1) +{ + return add_numbered_child(chip, name, -1, pdata, pdata_len, + can_wakeup, irq0, irq1); +} + +static struct device * +add_regulator_linked(int num, struct regulator_init_data *pdata, + struct regulator_consumer_supply *consumers, + unsigned num_consumers) +{ + /* regulator framework demands init_data ... */ + if (!pdata) + return NULL; + + if (consumers) { + pdata->consumer_supplies = consumers; + pdata->num_consumer_supplies = num_consumers; + } + + /* NOTE: we currently ignore regulator IRQs, e.g. for short circuits */ + return add_numbered_child(3, "twl4030_reg", num, + pdata, sizeof(*pdata), false, 0, 0); +} + +static struct device * +add_regulator(int num, struct regulator_init_data *pdata) +{ + return add_regulator_linked(num, pdata, NULL, 0); +} + +/* + * NOTE: We know the first 8 IRQs after pdata->base_irq are + * for the PIH, and the next are for the PWR_INT SIH, since + * that's how twl_init_irq() sets things up. + */ + +static int +add_children(struct twl4030_platform_data *pdata, unsigned long features) +{ + struct device *child; + + if (twl_has_bci() && pdata->bci && + !(features & (TPS_SUBSET | TWL5031))) { + child = add_child(3, "twl4030_bci", + pdata->bci, sizeof(*pdata->bci), + false, + /* irq0 = CHG_PRES, irq1 = BCI */ + pdata->irq_base + 8 + 1, pdata->irq_base + 2); + if (IS_ERR(child)) + return PTR_ERR(child); + } + + if (twl_has_gpio() && pdata->gpio) { + child = add_child(1, "twl4030_gpio", + pdata->gpio, sizeof(*pdata->gpio), + false, pdata->irq_base + 0, 0); + if (IS_ERR(child)) + return PTR_ERR(child); + } + + if (twl_has_keypad() && pdata->keypad) { + child = add_child(2, "twl4030_keypad", + pdata->keypad, sizeof(*pdata->keypad), + true, pdata->irq_base + 1, 0); + if (IS_ERR(child)) + return PTR_ERR(child); + } + + if (twl_has_madc() && pdata->madc) { + child = add_child(2, "twl4030_madc", + pdata->madc, sizeof(*pdata->madc), + true, pdata->irq_base + 3, 0); + if (IS_ERR(child)) + return PTR_ERR(child); + } + + if (twl_has_rtc()) { + /* + * REVISIT platform_data here currently might expose the + * "msecure" line ... but for now we just expect board + * setup to tell the chip "it's always ok to SET_TIME". + * Eventually, Linux might become more aware of such + * HW security concerns, and "least privilege". + */ + child = add_child(3, "twl4030_rtc", + NULL, 0, + true, pdata->irq_base + 8 + 3, 0); + if (IS_ERR(child)) + return PTR_ERR(child); + } + + if (twl_has_usb() && pdata->usb) { + + static struct regulator_consumer_supply usb1v5 = { + .supply = "usb1v5", + }; + static struct regulator_consumer_supply usb1v8 = { + .supply = "usb1v8", + }; + static struct regulator_consumer_supply usb3v1 = { + .supply = "usb3v1", + }; + + /* First add the regulators so that they can be used by transceiver */ + if (twl_has_regulator()) { + /* this is a template that gets copied */ + struct regulator_init_data usb_fixed = { + .constraints.valid_modes_mask = + REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .constraints.valid_ops_mask = + REGULATOR_CHANGE_MODE + | REGULATOR_CHANGE_STATUS, + }; + + child = add_regulator_linked(TWL4030_REG_VUSB1V5, + &usb_fixed, &usb1v5, 1); + if (IS_ERR(child)) + return PTR_ERR(child); + + child = add_regulator_linked(TWL4030_REG_VUSB1V8, + &usb_fixed, &usb1v8, 1); + if (IS_ERR(child)) + return PTR_ERR(child); + + child = add_regulator_linked(TWL4030_REG_VUSB3V1, + &usb_fixed, &usb3v1, 1); + if (IS_ERR(child)) + return PTR_ERR(child); + + } + + child = add_child(0, "twl4030_usb", + pdata->usb, sizeof(*pdata->usb), + true, + /* irq0 = USB_PRES, irq1 = USB */ + pdata->irq_base + 8 + 2, pdata->irq_base + 4); + + if (IS_ERR(child)) + return PTR_ERR(child); + + /* we need to connect regulators to this transceiver */ + if (twl_has_regulator() && child) { + usb1v5.dev = child; + usb1v8.dev = child; + usb3v1.dev = child; + } + } + + if (twl_has_watchdog()) { + child = add_child(0, "twl4030_wdt", NULL, 0, false, 0, 0); + if (IS_ERR(child)) + return PTR_ERR(child); + } + + if (twl_has_pwrbutton()) { + child = add_child(1, "twl4030_pwrbutton", + NULL, 0, true, pdata->irq_base + 8 + 0, 0); + if (IS_ERR(child)) + return PTR_ERR(child); + } + + if (twl_has_codec() && pdata->codec) { + child = add_child(1, "twl4030_codec", + pdata->codec, sizeof(*pdata->codec), + false, 0, 0); + if (IS_ERR(child)) + return PTR_ERR(child); + } + + if (twl_has_regulator()) { + child = add_regulator(TWL4030_REG_VPLL1, pdata->vpll1); + if (IS_ERR(child)) + return PTR_ERR(child); + + child = add_regulator(TWL4030_REG_VIO, pdata->vio); + if (IS_ERR(child)) + return PTR_ERR(child); + + child = add_regulator(TWL4030_REG_VDD1, pdata->vdd1); + if (IS_ERR(child)) + return PTR_ERR(child); + + child = add_regulator(TWL4030_REG_VDD2, pdata->vdd2); + if (IS_ERR(child)) + return PTR_ERR(child); + + child = add_regulator(TWL4030_REG_VMMC1, pdata->vmmc1); + if (IS_ERR(child)) + return PTR_ERR(child); + + child = add_regulator(TWL4030_REG_VDAC, pdata->vdac); + if (IS_ERR(child)) + return PTR_ERR(child); + + child = add_regulator((features & TWL4030_VAUX2) + ? TWL4030_REG_VAUX2_4030 + : TWL4030_REG_VAUX2, + pdata->vaux2); + if (IS_ERR(child)) + return PTR_ERR(child); + + child = add_regulator(TWL4030_REG_VINTANA1, pdata->vintana1); + if (IS_ERR(child)) + return PTR_ERR(child); + + child = add_regulator(TWL4030_REG_VINTANA2, pdata->vintana2); + if (IS_ERR(child)) + return PTR_ERR(child); + + child = add_regulator(TWL4030_REG_VINTDIG, pdata->vintdig); + if (IS_ERR(child)) + return PTR_ERR(child); + } + + /* maybe add LDOs that are omitted on cost-reduced parts */ + if (twl_has_regulator() && !(features & TPS_SUBSET)) { + child = add_regulator(TWL4030_REG_VPLL2, pdata->vpll2); + if (IS_ERR(child)) + return PTR_ERR(child); + + child = add_regulator(TWL4030_REG_VMMC2, pdata->vmmc2); + if (IS_ERR(child)) + return PTR_ERR(child); + + child = add_regulator(TWL4030_REG_VSIM, pdata->vsim); + if (IS_ERR(child)) + return PTR_ERR(child); + + child = add_regulator(TWL4030_REG_VAUX1, pdata->vaux1); + if (IS_ERR(child)) + return PTR_ERR(child); + + child = add_regulator(TWL4030_REG_VAUX3, pdata->vaux3); + if (IS_ERR(child)) + return PTR_ERR(child); + + child = add_regulator(TWL4030_REG_VAUX4, pdata->vaux4); + if (IS_ERR(child)) + return PTR_ERR(child); + } + + return 0; +} + +/*----------------------------------------------------------------------*/ + +/* + * These three functions initialize the on-chip clock framework, + * letting it generate the right frequencies for USB, MADC, and + * other purposes. + */ +static inline int __init protect_pm_master(void) +{ + int e = 0; + + e = twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, KEY_LOCK, + R_PROTECT_KEY); + return e; +} + +static inline int __init unprotect_pm_master(void) +{ + int e = 0; + + e |= twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, KEY_UNLOCK1, + R_PROTECT_KEY); + e |= twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, KEY_UNLOCK2, + R_PROTECT_KEY); + return e; +} + +static void clocks_init(struct device *dev, + struct twl4030_clock_init_data *clock) +{ + int e = 0; + struct clk *osc; + u32 rate; + u8 ctrl = HFCLK_FREQ_26_MHZ; + +#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) + if (cpu_is_omap2430()) + osc = clk_get(dev, "osc_ck"); + else + osc = clk_get(dev, "osc_sys_ck"); + + if (IS_ERR(osc)) { + printk(KERN_WARNING "Skipping twl4030 internal clock init and " + "using bootloader value (unknown osc rate)\n"); + return; + } + + rate = clk_get_rate(osc); + clk_put(osc); + +#else + /* REVISIT for non-OMAP systems, pass the clock rate from + * board init code, using platform_data. + */ + osc = ERR_PTR(-EIO); + + printk(KERN_WARNING "Skipping twl4030 internal clock init and " + "using bootloader value (unknown osc rate)\n"); + + return; +#endif + + switch (rate) { + case 19200000: + ctrl = HFCLK_FREQ_19p2_MHZ; + break; + case 26000000: + ctrl = HFCLK_FREQ_26_MHZ; + break; + case 38400000: + ctrl = HFCLK_FREQ_38p4_MHZ; + break; + } + + ctrl |= HIGH_PERF_SQ; + if (clock && clock->ck32k_lowpwr_enable) + ctrl |= CK32K_LOWPWR_EN; + + e |= unprotect_pm_master(); + /* effect->MADC+USB ck en */ + e |= twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, ctrl, R_CFG_BOOT); + e |= protect_pm_master(); + + if (e < 0) + pr_err("%s: clock init err [%d]\n", DRIVER_NAME, e); +} + +/*----------------------------------------------------------------------*/ + +int twl_init_irq(int irq_num, unsigned irq_base, unsigned irq_end); +int twl_exit_irq(void); +int twl_init_chip_irq(const char *chip); + +static int twl4030_remove(struct i2c_client *client) +{ + unsigned i; + int status; + + status = twl_exit_irq(); + if (status < 0) + return status; + + for (i = 0; i < TWL4030_NUM_SLAVES; i++) { + struct twl4030_client *twl = &twl4030_modules[i]; + + if (twl->client && twl->client != client) + i2c_unregister_device(twl->client); + twl4030_modules[i].client = NULL; + } + inuse = false; + return 0; +} + +/* NOTE: this driver only handles a single twl4030/tps659x0 chip */ +static int __init +twl4030_probe(struct i2c_client *client, const struct i2c_device_id *id) +{ + int status; + unsigned i; + struct twl4030_platform_data *pdata = client->dev.platform_data; + + if (!pdata) { + dev_dbg(&client->dev, "no platform data?\n"); + return -EINVAL; + } + + if (i2c_check_functionality(client->adapter, I2C_FUNC_I2C) == 0) { + dev_dbg(&client->dev, "can't talk I2C?\n"); + return -EIO; + } + + if (inuse) { + dev_dbg(&client->dev, "driver is already in use\n"); + return -EBUSY; + } + + for (i = 0; i < TWL4030_NUM_SLAVES; i++) { + struct twl4030_client *twl = &twl4030_modules[i]; + + twl->address = client->addr + i; + if (i == 0) + twl->client = client; + else { + twl->client = i2c_new_dummy(client->adapter, + twl->address); + if (!twl->client) { + dev_err(&client->dev, + "can't attach client %d\n", i); + status = -ENOMEM; + goto fail; + } + } + mutex_init(&twl->xfer_lock); + } + inuse = true; + + /* setup clock framework */ + clocks_init(&client->dev, pdata->clock); + + /* load power event scripts */ + if (twl_has_power() && pdata->power) + twl4030_power_init(pdata->power); + + /* Maybe init the T2 Interrupt subsystem */ + if (client->irq + && pdata->irq_base + && pdata->irq_end > pdata->irq_base) { + twl_init_chip_irq(id->name); + status = twl_init_irq(client->irq, pdata->irq_base, pdata->irq_end); + if (status < 0) + goto fail; + } + + status = add_children(pdata, id->driver_data); +fail: + if (status < 0) + twl4030_remove(client); + return status; +} + +static const struct i2c_device_id twl4030_ids[] = { + { "twl4030", TWL4030_VAUX2 }, /* "Triton 2" */ + { "twl5030", 0 }, /* T2 updated */ + { "twl5031", TWL5031 }, /* TWL5030 updated */ + { "tps65950", 0 }, /* catalog version of twl5030 */ + { "tps65930", TPS_SUBSET }, /* fewer LDOs and DACs; no charger */ + { "tps65920", TPS_SUBSET }, /* fewer LDOs; no codec or charger */ + { /* end of list */ }, +}; +MODULE_DEVICE_TABLE(i2c, twl4030_ids); + +/* One Client Driver , 4 Clients */ +static struct i2c_driver twl4030_driver = { + .driver.name = DRIVER_NAME, + .id_table = twl4030_ids, + .probe = twl4030_probe, + .remove = twl4030_remove, +}; + +static int __init twl4030_init(void) +{ + return i2c_add_driver(&twl4030_driver); +} +subsys_initcall(twl4030_init); + +static void __exit twl4030_exit(void) +{ + i2c_del_driver(&twl4030_driver); +} +module_exit(twl4030_exit); + +MODULE_AUTHOR("Texas Instruments, Inc."); +MODULE_DESCRIPTION("I2C Core interface for TWL4030"); +MODULE_LICENSE("GPL"); diff --git a/drivers/mfd/twl4030-core.c b/drivers/mfd/twl4030-core.c deleted file mode 100644 index 7c2ec0aa9d87..000000000000 --- a/drivers/mfd/twl4030-core.c +++ /dev/null @@ -1,929 +0,0 @@ -/* - * twl4030_core.c - driver for TWL4030/TPS659x0 PM and audio CODEC devices - * - * Copyright (C) 2005-2006 Texas Instruments, Inc. - * - * Modifications to defer interrupt handling to a kernel thread: - * Copyright (C) 2006 MontaVista Software, Inc. - * - * Based on tlv320aic23.c: - * Copyright (c) by Kai Svahn - * - * Code cleanup and modifications to IRQ handler. - * by syed khasim - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#include -#include -#include -#include -#include - -#include - -#include -#include - -#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) -#include -#endif - -/* - * The TWL4030 "Triton 2" is one of a family of a multi-function "Power - * Management and System Companion Device" chips originally designed for - * use in OMAP2 and OMAP 3 based systems. Its control interfaces use I2C, - * often at around 3 Mbit/sec, including for interrupt handling. - * - * This driver core provides genirq support for the interrupts emitted, - * by the various modules, and exports register access primitives. - * - * FIXME this driver currently requires use of the first interrupt line - * (and associated registers). - */ - -#define DRIVER_NAME "twl4030" - -#if defined(CONFIG_TWL4030_BCI_BATTERY) || \ - defined(CONFIG_TWL4030_BCI_BATTERY_MODULE) -#define twl_has_bci() true -#else -#define twl_has_bci() false -#endif - -#if defined(CONFIG_KEYBOARD_TWL4030) || defined(CONFIG_KEYBOARD_TWL4030_MODULE) -#define twl_has_keypad() true -#else -#define twl_has_keypad() false -#endif - -#if defined(CONFIG_GPIO_TWL4030) || defined(CONFIG_GPIO_TWL4030_MODULE) -#define twl_has_gpio() true -#else -#define twl_has_gpio() false -#endif - -#if defined(CONFIG_REGULATOR_TWL4030) \ - || defined(CONFIG_REGULATOR_TWL4030_MODULE) -#define twl_has_regulator() true -#else -#define twl_has_regulator() false -#endif - -#if defined(CONFIG_TWL4030_MADC) || defined(CONFIG_TWL4030_MADC_MODULE) -#define twl_has_madc() true -#else -#define twl_has_madc() false -#endif - -#ifdef CONFIG_TWL4030_POWER -#define twl_has_power() true -#else -#define twl_has_power() false -#endif - -#if defined(CONFIG_RTC_DRV_TWL4030) || defined(CONFIG_RTC_DRV_TWL4030_MODULE) -#define twl_has_rtc() true -#else -#define twl_has_rtc() false -#endif - -#if defined(CONFIG_TWL4030_USB) || defined(CONFIG_TWL4030_USB_MODULE) -#define twl_has_usb() true -#else -#define twl_has_usb() false -#endif - -#if defined(CONFIG_TWL4030_WATCHDOG) || \ - defined(CONFIG_TWL4030_WATCHDOG_MODULE) -#define twl_has_watchdog() true -#else -#define twl_has_watchdog() false -#endif - -#if defined(CONFIG_TWL4030_CODEC) || defined(CONFIG_TWL4030_CODEC_MODULE) -#define twl_has_codec() true -#else -#define twl_has_codec() false -#endif - -/* Triton Core internal information (BEGIN) */ - -/* Last - for index max*/ -#define TWL4030_MODULE_LAST TWL4030_MODULE_SECURED_REG - -#define TWL4030_NUM_SLAVES 4 - -#if defined(CONFIG_INPUT_TWL4030_PWRBUTTON) \ - || defined(CONFIG_INPUT_TWL4030_PWBUTTON_MODULE) -#define twl_has_pwrbutton() true -#else -#define twl_has_pwrbutton() false -#endif - -/* Base Address defns for twl4030_map[] */ - -/* subchip/slave 0 - USB ID */ -#define TWL4030_BASEADD_USB 0x0000 - -/* subchip/slave 1 - AUD ID */ -#define TWL4030_BASEADD_AUDIO_VOICE 0x0000 -#define TWL4030_BASEADD_GPIO 0x0098 -#define TWL4030_BASEADD_INTBR 0x0085 -#define TWL4030_BASEADD_PIH 0x0080 -#define TWL4030_BASEADD_TEST 0x004C - -/* subchip/slave 2 - AUX ID */ -#define TWL4030_BASEADD_INTERRUPTS 0x00B9 -#define TWL4030_BASEADD_LED 0x00EE -#define TWL4030_BASEADD_MADC 0x0000 -#define TWL4030_BASEADD_MAIN_CHARGE 0x0074 -#define TWL4030_BASEADD_PRECHARGE 0x00AA -#define TWL4030_BASEADD_PWM0 0x00F8 -#define TWL4030_BASEADD_PWM1 0x00FB -#define TWL4030_BASEADD_PWMA 0x00EF -#define TWL4030_BASEADD_PWMB 0x00F1 -#define TWL4030_BASEADD_KEYPAD 0x00D2 - -#define TWL5031_BASEADD_ACCESSORY 0x0074 /* Replaces Main Charge */ -#define TWL5031_BASEADD_INTERRUPTS 0x00B9 /* Different than TWL4030's - one */ - -/* subchip/slave 3 - POWER ID */ -#define TWL4030_BASEADD_BACKUP 0x0014 -#define TWL4030_BASEADD_INT 0x002E -#define TWL4030_BASEADD_PM_MASTER 0x0036 -#define TWL4030_BASEADD_PM_RECEIVER 0x005B -#define TWL4030_BASEADD_RTC 0x001C -#define TWL4030_BASEADD_SECURED_REG 0x0000 - -/* Triton Core internal information (END) */ - - -/* Few power values */ -#define R_CFG_BOOT 0x05 -#define R_PROTECT_KEY 0x0E - -/* access control values for R_PROTECT_KEY */ -#define KEY_UNLOCK1 0xce -#define KEY_UNLOCK2 0xec -#define KEY_LOCK 0x00 - -/* some fields in R_CFG_BOOT */ -#define HFCLK_FREQ_19p2_MHZ (1 << 0) -#define HFCLK_FREQ_26_MHZ (2 << 0) -#define HFCLK_FREQ_38p4_MHZ (3 << 0) -#define HIGH_PERF_SQ (1 << 3) -#define CK32K_LOWPWR_EN (1 << 7) - - -/* chip-specific feature flags, for i2c_device_id.driver_data */ -#define TWL4030_VAUX2 BIT(0) /* pre-5030 voltage ranges */ -#define TPS_SUBSET BIT(1) /* tps659[23]0 have fewer LDOs */ -#define TWL5031 BIT(2) /* twl5031 has different registers */ - -/*----------------------------------------------------------------------*/ - -/* is driver active, bound to a chip? */ -static bool inuse; - -/* Structure for each TWL4030 Slave */ -struct twl4030_client { - struct i2c_client *client; - u8 address; - - /* max numb of i2c_msg required is for read =2 */ - struct i2c_msg xfer_msg[2]; - - /* To lock access to xfer_msg */ - struct mutex xfer_lock; -}; - -static struct twl4030_client twl4030_modules[TWL4030_NUM_SLAVES]; - - -/* mapping the module id to slave id and base address */ -struct twl4030mapping { - unsigned char sid; /* Slave ID */ - unsigned char base; /* base address */ -}; - -static struct twl4030mapping twl4030_map[TWL4030_MODULE_LAST + 1] = { - /* - * NOTE: don't change this table without updating the - * defines for TWL4030_MODULE_* - * so they continue to match the order in this table. - */ - - { 0, TWL4030_BASEADD_USB }, - - { 1, TWL4030_BASEADD_AUDIO_VOICE }, - { 1, TWL4030_BASEADD_GPIO }, - { 1, TWL4030_BASEADD_INTBR }, - { 1, TWL4030_BASEADD_PIH }, - { 1, TWL4030_BASEADD_TEST }, - - { 2, TWL4030_BASEADD_KEYPAD }, - { 2, TWL4030_BASEADD_MADC }, - { 2, TWL4030_BASEADD_INTERRUPTS }, - { 2, TWL4030_BASEADD_LED }, - { 2, TWL4030_BASEADD_MAIN_CHARGE }, - { 2, TWL4030_BASEADD_PRECHARGE }, - { 2, TWL4030_BASEADD_PWM0 }, - { 2, TWL4030_BASEADD_PWM1 }, - { 2, TWL4030_BASEADD_PWMA }, - { 2, TWL4030_BASEADD_PWMB }, - { 2, TWL5031_BASEADD_ACCESSORY }, - { 2, TWL5031_BASEADD_INTERRUPTS }, - - { 3, TWL4030_BASEADD_BACKUP }, - { 3, TWL4030_BASEADD_INT }, - { 3, TWL4030_BASEADD_PM_MASTER }, - { 3, TWL4030_BASEADD_PM_RECEIVER }, - { 3, TWL4030_BASEADD_RTC }, - { 3, TWL4030_BASEADD_SECURED_REG }, -}; - -/*----------------------------------------------------------------------*/ - -/* Exported Functions */ - -/** - * twl4030_i2c_write - Writes a n bit register in TWL4030 - * @mod_no: module number - * @value: an array of num_bytes+1 containing data to write - * @reg: register address (just offset will do) - * @num_bytes: number of bytes to transfer - * - * IMPORTANT: for 'value' parameter: Allocate value num_bytes+1 and - * valid data starts at Offset 1. - * - * Returns the result of operation - 0 is success - */ -int twl4030_i2c_write(u8 mod_no, u8 *value, u8 reg, unsigned num_bytes) -{ - int ret; - int sid; - struct twl4030_client *twl; - struct i2c_msg *msg; - - if (unlikely(mod_no > TWL4030_MODULE_LAST)) { - pr_err("%s: invalid module number %d\n", DRIVER_NAME, mod_no); - return -EPERM; - } - sid = twl4030_map[mod_no].sid; - twl = &twl4030_modules[sid]; - - if (unlikely(!inuse)) { - pr_err("%s: client %d is not initialized\n", DRIVER_NAME, sid); - return -EPERM; - } - mutex_lock(&twl->xfer_lock); - /* - * [MSG1]: fill the register address data - * fill the data Tx buffer - */ - msg = &twl->xfer_msg[0]; - msg->addr = twl->address; - msg->len = num_bytes + 1; - msg->flags = 0; - msg->buf = value; - /* over write the first byte of buffer with the register address */ - *value = twl4030_map[mod_no].base + reg; - ret = i2c_transfer(twl->client->adapter, twl->xfer_msg, 1); - mutex_unlock(&twl->xfer_lock); - - /* i2c_transfer returns number of messages transferred */ - if (ret != 1) { - pr_err("%s: i2c_write failed to transfer all messages\n", - DRIVER_NAME); - if (ret < 0) - return ret; - else - return -EIO; - } else { - return 0; - } -} -EXPORT_SYMBOL(twl4030_i2c_write); - -/** - * twl4030_i2c_read - Reads a n bit register in TWL4030 - * @mod_no: module number - * @value: an array of num_bytes containing data to be read - * @reg: register address (just offset will do) - * @num_bytes: number of bytes to transfer - * - * Returns result of operation - num_bytes is success else failure. - */ -int twl4030_i2c_read(u8 mod_no, u8 *value, u8 reg, unsigned num_bytes) -{ - int ret; - u8 val; - int sid; - struct twl4030_client *twl; - struct i2c_msg *msg; - - if (unlikely(mod_no > TWL4030_MODULE_LAST)) { - pr_err("%s: invalid module number %d\n", DRIVER_NAME, mod_no); - return -EPERM; - } - sid = twl4030_map[mod_no].sid; - twl = &twl4030_modules[sid]; - - if (unlikely(!inuse)) { - pr_err("%s: client %d is not initialized\n", DRIVER_NAME, sid); - return -EPERM; - } - mutex_lock(&twl->xfer_lock); - /* [MSG1] fill the register address data */ - msg = &twl->xfer_msg[0]; - msg->addr = twl->address; - msg->len = 1; - msg->flags = 0; /* Read the register value */ - val = twl4030_map[mod_no].base + reg; - msg->buf = &val; - /* [MSG2] fill the data rx buffer */ - msg = &twl->xfer_msg[1]; - msg->addr = twl->address; - msg->flags = I2C_M_RD; /* Read the register value */ - msg->len = num_bytes; /* only n bytes */ - msg->buf = value; - ret = i2c_transfer(twl->client->adapter, twl->xfer_msg, 2); - mutex_unlock(&twl->xfer_lock); - - /* i2c_transfer returns number of messages transferred */ - if (ret != 2) { - pr_err("%s: i2c_read failed to transfer all messages\n", - DRIVER_NAME); - if (ret < 0) - return ret; - else - return -EIO; - } else { - return 0; - } -} -EXPORT_SYMBOL(twl4030_i2c_read); - -/** - * twl4030_i2c_write_u8 - Writes a 8 bit register in TWL4030 - * @mod_no: module number - * @value: the value to be written 8 bit - * @reg: register address (just offset will do) - * - * Returns result of operation - 0 is success - */ -int twl4030_i2c_write_u8(u8 mod_no, u8 value, u8 reg) -{ - - /* 2 bytes offset 1 contains the data offset 0 is used by i2c_write */ - u8 temp_buffer[2] = { 0 }; - /* offset 1 contains the data */ - temp_buffer[1] = value; - return twl4030_i2c_write(mod_no, temp_buffer, reg, 1); -} -EXPORT_SYMBOL(twl4030_i2c_write_u8); - -/** - * twl4030_i2c_read_u8 - Reads a 8 bit register from TWL4030 - * @mod_no: module number - * @value: the value read 8 bit - * @reg: register address (just offset will do) - * - * Returns result of operation - 0 is success - */ -int twl4030_i2c_read_u8(u8 mod_no, u8 *value, u8 reg) -{ - return twl4030_i2c_read(mod_no, value, reg, 1); -} -EXPORT_SYMBOL(twl4030_i2c_read_u8); - -/*----------------------------------------------------------------------*/ - -static struct device * -add_numbered_child(unsigned chip, const char *name, int num, - void *pdata, unsigned pdata_len, - bool can_wakeup, int irq0, int irq1) -{ - struct platform_device *pdev; - struct twl4030_client *twl = &twl4030_modules[chip]; - int status; - - pdev = platform_device_alloc(name, num); - if (!pdev) { - dev_dbg(&twl->client->dev, "can't alloc dev\n"); - status = -ENOMEM; - goto err; - } - - device_init_wakeup(&pdev->dev, can_wakeup); - pdev->dev.parent = &twl->client->dev; - - if (pdata) { - status = platform_device_add_data(pdev, pdata, pdata_len); - if (status < 0) { - dev_dbg(&pdev->dev, "can't add platform_data\n"); - goto err; - } - } - - if (irq0) { - struct resource r[2] = { - { .start = irq0, .flags = IORESOURCE_IRQ, }, - { .start = irq1, .flags = IORESOURCE_IRQ, }, - }; - - status = platform_device_add_resources(pdev, r, irq1 ? 2 : 1); - if (status < 0) { - dev_dbg(&pdev->dev, "can't add irqs\n"); - goto err; - } - } - - status = platform_device_add(pdev); - -err: - if (status < 0) { - platform_device_put(pdev); - dev_err(&twl->client->dev, "can't add %s dev\n", name); - return ERR_PTR(status); - } - return &pdev->dev; -} - -static inline struct device *add_child(unsigned chip, const char *name, - void *pdata, unsigned pdata_len, - bool can_wakeup, int irq0, int irq1) -{ - return add_numbered_child(chip, name, -1, pdata, pdata_len, - can_wakeup, irq0, irq1); -} - -static struct device * -add_regulator_linked(int num, struct regulator_init_data *pdata, - struct regulator_consumer_supply *consumers, - unsigned num_consumers) -{ - /* regulator framework demands init_data ... */ - if (!pdata) - return NULL; - - if (consumers) { - pdata->consumer_supplies = consumers; - pdata->num_consumer_supplies = num_consumers; - } - - /* NOTE: we currently ignore regulator IRQs, e.g. for short circuits */ - return add_numbered_child(3, "twl4030_reg", num, - pdata, sizeof(*pdata), false, 0, 0); -} - -static struct device * -add_regulator(int num, struct regulator_init_data *pdata) -{ - return add_regulator_linked(num, pdata, NULL, 0); -} - -/* - * NOTE: We know the first 8 IRQs after pdata->base_irq are - * for the PIH, and the next are for the PWR_INT SIH, since - * that's how twl_init_irq() sets things up. - */ - -static int -add_children(struct twl4030_platform_data *pdata, unsigned long features) -{ - struct device *child; - - if (twl_has_bci() && pdata->bci && - !(features & (TPS_SUBSET | TWL5031))) { - child = add_child(3, "twl4030_bci", - pdata->bci, sizeof(*pdata->bci), - false, - /* irq0 = CHG_PRES, irq1 = BCI */ - pdata->irq_base + 8 + 1, pdata->irq_base + 2); - if (IS_ERR(child)) - return PTR_ERR(child); - } - - if (twl_has_gpio() && pdata->gpio) { - child = add_child(1, "twl4030_gpio", - pdata->gpio, sizeof(*pdata->gpio), - false, pdata->irq_base + 0, 0); - if (IS_ERR(child)) - return PTR_ERR(child); - } - - if (twl_has_keypad() && pdata->keypad) { - child = add_child(2, "twl4030_keypad", - pdata->keypad, sizeof(*pdata->keypad), - true, pdata->irq_base + 1, 0); - if (IS_ERR(child)) - return PTR_ERR(child); - } - - if (twl_has_madc() && pdata->madc) { - child = add_child(2, "twl4030_madc", - pdata->madc, sizeof(*pdata->madc), - true, pdata->irq_base + 3, 0); - if (IS_ERR(child)) - return PTR_ERR(child); - } - - if (twl_has_rtc()) { - /* - * REVISIT platform_data here currently might expose the - * "msecure" line ... but for now we just expect board - * setup to tell the chip "it's always ok to SET_TIME". - * Eventually, Linux might become more aware of such - * HW security concerns, and "least privilege". - */ - child = add_child(3, "twl4030_rtc", - NULL, 0, - true, pdata->irq_base + 8 + 3, 0); - if (IS_ERR(child)) - return PTR_ERR(child); - } - - if (twl_has_usb() && pdata->usb) { - - static struct regulator_consumer_supply usb1v5 = { - .supply = "usb1v5", - }; - static struct regulator_consumer_supply usb1v8 = { - .supply = "usb1v8", - }; - static struct regulator_consumer_supply usb3v1 = { - .supply = "usb3v1", - }; - - /* First add the regulators so that they can be used by transceiver */ - if (twl_has_regulator()) { - /* this is a template that gets copied */ - struct regulator_init_data usb_fixed = { - .constraints.valid_modes_mask = - REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .constraints.valid_ops_mask = - REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }; - - child = add_regulator_linked(TWL4030_REG_VUSB1V5, - &usb_fixed, &usb1v5, 1); - if (IS_ERR(child)) - return PTR_ERR(child); - - child = add_regulator_linked(TWL4030_REG_VUSB1V8, - &usb_fixed, &usb1v8, 1); - if (IS_ERR(child)) - return PTR_ERR(child); - - child = add_regulator_linked(TWL4030_REG_VUSB3V1, - &usb_fixed, &usb3v1, 1); - if (IS_ERR(child)) - return PTR_ERR(child); - - } - - child = add_child(0, "twl4030_usb", - pdata->usb, sizeof(*pdata->usb), - true, - /* irq0 = USB_PRES, irq1 = USB */ - pdata->irq_base + 8 + 2, pdata->irq_base + 4); - - if (IS_ERR(child)) - return PTR_ERR(child); - - /* we need to connect regulators to this transceiver */ - if (twl_has_regulator() && child) { - usb1v5.dev = child; - usb1v8.dev = child; - usb3v1.dev = child; - } - } - - if (twl_has_watchdog()) { - child = add_child(0, "twl4030_wdt", NULL, 0, false, 0, 0); - if (IS_ERR(child)) - return PTR_ERR(child); - } - - if (twl_has_pwrbutton()) { - child = add_child(1, "twl4030_pwrbutton", - NULL, 0, true, pdata->irq_base + 8 + 0, 0); - if (IS_ERR(child)) - return PTR_ERR(child); - } - - if (twl_has_codec() && pdata->codec) { - child = add_child(1, "twl4030_codec", - pdata->codec, sizeof(*pdata->codec), - false, 0, 0); - if (IS_ERR(child)) - return PTR_ERR(child); - } - - if (twl_has_regulator()) { - child = add_regulator(TWL4030_REG_VPLL1, pdata->vpll1); - if (IS_ERR(child)) - return PTR_ERR(child); - - child = add_regulator(TWL4030_REG_VIO, pdata->vio); - if (IS_ERR(child)) - return PTR_ERR(child); - - child = add_regulator(TWL4030_REG_VDD1, pdata->vdd1); - if (IS_ERR(child)) - return PTR_ERR(child); - - child = add_regulator(TWL4030_REG_VDD2, pdata->vdd2); - if (IS_ERR(child)) - return PTR_ERR(child); - - child = add_regulator(TWL4030_REG_VMMC1, pdata->vmmc1); - if (IS_ERR(child)) - return PTR_ERR(child); - - child = add_regulator(TWL4030_REG_VDAC, pdata->vdac); - if (IS_ERR(child)) - return PTR_ERR(child); - - child = add_regulator((features & TWL4030_VAUX2) - ? TWL4030_REG_VAUX2_4030 - : TWL4030_REG_VAUX2, - pdata->vaux2); - if (IS_ERR(child)) - return PTR_ERR(child); - - child = add_regulator(TWL4030_REG_VINTANA1, pdata->vintana1); - if (IS_ERR(child)) - return PTR_ERR(child); - - child = add_regulator(TWL4030_REG_VINTANA2, pdata->vintana2); - if (IS_ERR(child)) - return PTR_ERR(child); - - child = add_regulator(TWL4030_REG_VINTDIG, pdata->vintdig); - if (IS_ERR(child)) - return PTR_ERR(child); - } - - /* maybe add LDOs that are omitted on cost-reduced parts */ - if (twl_has_regulator() && !(features & TPS_SUBSET)) { - child = add_regulator(TWL4030_REG_VPLL2, pdata->vpll2); - if (IS_ERR(child)) - return PTR_ERR(child); - - child = add_regulator(TWL4030_REG_VMMC2, pdata->vmmc2); - if (IS_ERR(child)) - return PTR_ERR(child); - - child = add_regulator(TWL4030_REG_VSIM, pdata->vsim); - if (IS_ERR(child)) - return PTR_ERR(child); - - child = add_regulator(TWL4030_REG_VAUX1, pdata->vaux1); - if (IS_ERR(child)) - return PTR_ERR(child); - - child = add_regulator(TWL4030_REG_VAUX3, pdata->vaux3); - if (IS_ERR(child)) - return PTR_ERR(child); - - child = add_regulator(TWL4030_REG_VAUX4, pdata->vaux4); - if (IS_ERR(child)) - return PTR_ERR(child); - } - - return 0; -} - -/*----------------------------------------------------------------------*/ - -/* - * These three functions initialize the on-chip clock framework, - * letting it generate the right frequencies for USB, MADC, and - * other purposes. - */ -static inline int __init protect_pm_master(void) -{ - int e = 0; - - e = twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, KEY_LOCK, - R_PROTECT_KEY); - return e; -} - -static inline int __init unprotect_pm_master(void) -{ - int e = 0; - - e |= twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, KEY_UNLOCK1, - R_PROTECT_KEY); - e |= twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, KEY_UNLOCK2, - R_PROTECT_KEY); - return e; -} - -static void clocks_init(struct device *dev, - struct twl4030_clock_init_data *clock) -{ - int e = 0; - struct clk *osc; - u32 rate; - u8 ctrl = HFCLK_FREQ_26_MHZ; - -#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) - if (cpu_is_omap2430()) - osc = clk_get(dev, "osc_ck"); - else - osc = clk_get(dev, "osc_sys_ck"); - - if (IS_ERR(osc)) { - printk(KERN_WARNING "Skipping twl4030 internal clock init and " - "using bootloader value (unknown osc rate)\n"); - return; - } - - rate = clk_get_rate(osc); - clk_put(osc); - -#else - /* REVISIT for non-OMAP systems, pass the clock rate from - * board init code, using platform_data. - */ - osc = ERR_PTR(-EIO); - - printk(KERN_WARNING "Skipping twl4030 internal clock init and " - "using bootloader value (unknown osc rate)\n"); - - return; -#endif - - switch (rate) { - case 19200000: - ctrl = HFCLK_FREQ_19p2_MHZ; - break; - case 26000000: - ctrl = HFCLK_FREQ_26_MHZ; - break; - case 38400000: - ctrl = HFCLK_FREQ_38p4_MHZ; - break; - } - - ctrl |= HIGH_PERF_SQ; - if (clock && clock->ck32k_lowpwr_enable) - ctrl |= CK32K_LOWPWR_EN; - - e |= unprotect_pm_master(); - /* effect->MADC+USB ck en */ - e |= twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, ctrl, R_CFG_BOOT); - e |= protect_pm_master(); - - if (e < 0) - pr_err("%s: clock init err [%d]\n", DRIVER_NAME, e); -} - -/*----------------------------------------------------------------------*/ - -int twl_init_irq(int irq_num, unsigned irq_base, unsigned irq_end); -int twl_exit_irq(void); -int twl_init_chip_irq(const char *chip); - -static int twl4030_remove(struct i2c_client *client) -{ - unsigned i; - int status; - - status = twl_exit_irq(); - if (status < 0) - return status; - - for (i = 0; i < TWL4030_NUM_SLAVES; i++) { - struct twl4030_client *twl = &twl4030_modules[i]; - - if (twl->client && twl->client != client) - i2c_unregister_device(twl->client); - twl4030_modules[i].client = NULL; - } - inuse = false; - return 0; -} - -/* NOTE: this driver only handles a single twl4030/tps659x0 chip */ -static int __init -twl4030_probe(struct i2c_client *client, const struct i2c_device_id *id) -{ - int status; - unsigned i; - struct twl4030_platform_data *pdata = client->dev.platform_data; - - if (!pdata) { - dev_dbg(&client->dev, "no platform data?\n"); - return -EINVAL; - } - - if (i2c_check_functionality(client->adapter, I2C_FUNC_I2C) == 0) { - dev_dbg(&client->dev, "can't talk I2C?\n"); - return -EIO; - } - - if (inuse) { - dev_dbg(&client->dev, "driver is already in use\n"); - return -EBUSY; - } - - for (i = 0; i < TWL4030_NUM_SLAVES; i++) { - struct twl4030_client *twl = &twl4030_modules[i]; - - twl->address = client->addr + i; - if (i == 0) - twl->client = client; - else { - twl->client = i2c_new_dummy(client->adapter, - twl->address); - if (!twl->client) { - dev_err(&client->dev, - "can't attach client %d\n", i); - status = -ENOMEM; - goto fail; - } - } - mutex_init(&twl->xfer_lock); - } - inuse = true; - - /* setup clock framework */ - clocks_init(&client->dev, pdata->clock); - - /* load power event scripts */ - if (twl_has_power() && pdata->power) - twl4030_power_init(pdata->power); - - /* Maybe init the T2 Interrupt subsystem */ - if (client->irq - && pdata->irq_base - && pdata->irq_end > pdata->irq_base) { - twl_init_chip_irq(id->name); - status = twl_init_irq(client->irq, pdata->irq_base, pdata->irq_end); - if (status < 0) - goto fail; - } - - status = add_children(pdata, id->driver_data); -fail: - if (status < 0) - twl4030_remove(client); - return status; -} - -static const struct i2c_device_id twl4030_ids[] = { - { "twl4030", TWL4030_VAUX2 }, /* "Triton 2" */ - { "twl5030", 0 }, /* T2 updated */ - { "twl5031", TWL5031 }, /* TWL5030 updated */ - { "tps65950", 0 }, /* catalog version of twl5030 */ - { "tps65930", TPS_SUBSET }, /* fewer LDOs and DACs; no charger */ - { "tps65920", TPS_SUBSET }, /* fewer LDOs; no codec or charger */ - { /* end of list */ }, -}; -MODULE_DEVICE_TABLE(i2c, twl4030_ids); - -/* One Client Driver , 4 Clients */ -static struct i2c_driver twl4030_driver = { - .driver.name = DRIVER_NAME, - .id_table = twl4030_ids, - .probe = twl4030_probe, - .remove = twl4030_remove, -}; - -static int __init twl4030_init(void) -{ - return i2c_add_driver(&twl4030_driver); -} -subsys_initcall(twl4030_init); - -static void __exit twl4030_exit(void) -{ - i2c_del_driver(&twl4030_driver); -} -module_exit(twl4030_exit); - -MODULE_AUTHOR("Texas Instruments, Inc."); -MODULE_DESCRIPTION("I2C Core interface for TWL4030"); -MODULE_LICENSE("GPL"); diff --git a/drivers/mfd/twl4030-irq.c b/drivers/mfd/twl4030-irq.c index 3f7e93ca0514..c4528db549c6 100644 --- a/drivers/mfd/twl4030-irq.c +++ b/drivers/mfd/twl4030-irq.c @@ -32,7 +32,7 @@ #include #include -#include +#include /* diff --git a/drivers/mfd/twl4030-power.c b/drivers/mfd/twl4030-power.c index 3048f18e0419..424b255d6f92 100644 --- a/drivers/mfd/twl4030-power.c +++ b/drivers/mfd/twl4030-power.c @@ -26,7 +26,7 @@ #include #include -#include +#include #include #include diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile index 4257a8683778..9ae3cc44e668 100644 --- a/drivers/regulator/Makefile +++ b/drivers/regulator/Makefile @@ -11,7 +11,7 @@ obj-$(CONFIG_REGULATOR_USERSPACE_CONSUMER) += userspace-consumer.o obj-$(CONFIG_REGULATOR_BQ24022) += bq24022.o obj-$(CONFIG_REGULATOR_LP3971) += lp3971.o obj-$(CONFIG_REGULATOR_MAX1586) += max1586.o -obj-$(CONFIG_REGULATOR_TWL4030) += twl4030-regulator.o +obj-$(CONFIG_REGULATOR_TWL4030) += twl-regulator.o obj-$(CONFIG_REGULATOR_WM831X) += wm831x-dcdc.o obj-$(CONFIG_REGULATOR_WM831X) += wm831x-isink.o obj-$(CONFIG_REGULATOR_WM831X) += wm831x-ldo.o diff --git a/drivers/regulator/twl-regulator.c b/drivers/regulator/twl-regulator.c new file mode 100644 index 000000000000..c8a6e583d773 --- /dev/null +++ b/drivers/regulator/twl-regulator.c @@ -0,0 +1,500 @@ +/* + * twl4030-regulator.c -- support regulators in twl4030 family chips + * + * Copyright (C) 2008 David Brownell + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include +#include +#include +#include +#include +#include +#include + + +/* + * The TWL4030/TW5030/TPS659x0 family chips include power management, a + * USB OTG transceiver, an RTC, ADC, PWM, and lots more. Some versions + * include an audio codec, battery charger, and more voltage regulators. + * These chips are often used in OMAP-based systems. + * + * This driver implements software-based resource control for various + * voltage regulators. This is usually augmented with state machine + * based control. + */ + +struct twlreg_info { + /* start of regulator's PM_RECEIVER control register bank */ + u8 base; + + /* twl4030 resource ID, for resource control state machine */ + u8 id; + + /* voltage in mV = table[VSEL]; table_len must be a power-of-two */ + u8 table_len; + const u16 *table; + + /* chip constraints on regulator behavior */ + u16 min_mV; + + /* used by regulator core */ + struct regulator_desc desc; +}; + + +/* LDO control registers ... offset is from the base of its register bank. + * The first three registers of all power resource banks help hardware to + * manage the various resource groups. + */ +#define VREG_GRP 0 +#define VREG_TYPE 1 +#define VREG_REMAP 2 +#define VREG_DEDICATED 3 /* LDO control */ + + +static inline int +twl4030reg_read(struct twlreg_info *info, unsigned offset) +{ + u8 value; + int status; + + status = twl4030_i2c_read_u8(TWL4030_MODULE_PM_RECEIVER, + &value, info->base + offset); + return (status < 0) ? status : value; +} + +static inline int +twl4030reg_write(struct twlreg_info *info, unsigned offset, u8 value) +{ + return twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, + value, info->base + offset); +} + +/*----------------------------------------------------------------------*/ + +/* generic power resource operations, which work on all regulators */ + +static int twl4030reg_grp(struct regulator_dev *rdev) +{ + return twl4030reg_read(rdev_get_drvdata(rdev), VREG_GRP); +} + +/* + * Enable/disable regulators by joining/leaving the P1 (processor) group. + * We assume nobody else is updating the DEV_GRP registers. + */ + +#define P3_GRP BIT(7) /* "peripherals" */ +#define P2_GRP BIT(6) /* secondary processor, modem, etc */ +#define P1_GRP BIT(5) /* CPU/Linux */ + +static int twl4030reg_is_enabled(struct regulator_dev *rdev) +{ + int state = twl4030reg_grp(rdev); + + if (state < 0) + return state; + + return (state & P1_GRP) != 0; +} + +static int twl4030reg_enable(struct regulator_dev *rdev) +{ + struct twlreg_info *info = rdev_get_drvdata(rdev); + int grp; + + grp = twl4030reg_read(info, VREG_GRP); + if (grp < 0) + return grp; + + grp |= P1_GRP; + return twl4030reg_write(info, VREG_GRP, grp); +} + +static int twl4030reg_disable(struct regulator_dev *rdev) +{ + struct twlreg_info *info = rdev_get_drvdata(rdev); + int grp; + + grp = twl4030reg_read(info, VREG_GRP); + if (grp < 0) + return grp; + + grp &= ~P1_GRP; + return twl4030reg_write(info, VREG_GRP, grp); +} + +static int twl4030reg_get_status(struct regulator_dev *rdev) +{ + int state = twl4030reg_grp(rdev); + + if (state < 0) + return state; + state &= 0x0f; + + /* assume state != WARM_RESET; we'd not be running... */ + if (!state) + return REGULATOR_STATUS_OFF; + return (state & BIT(3)) + ? REGULATOR_STATUS_NORMAL + : REGULATOR_STATUS_STANDBY; +} + +static int twl4030reg_set_mode(struct regulator_dev *rdev, unsigned mode) +{ + struct twlreg_info *info = rdev_get_drvdata(rdev); + unsigned message; + int status; + + /* We can only set the mode through state machine commands... */ + switch (mode) { + case REGULATOR_MODE_NORMAL: + message = MSG_SINGULAR(DEV_GRP_P1, info->id, RES_STATE_ACTIVE); + break; + case REGULATOR_MODE_STANDBY: + message = MSG_SINGULAR(DEV_GRP_P1, info->id, RES_STATE_SLEEP); + break; + default: + return -EINVAL; + } + + /* Ensure the resource is associated with some group */ + status = twl4030reg_grp(rdev); + if (status < 0) + return status; + if (!(status & (P3_GRP | P2_GRP | P1_GRP))) + return -EACCES; + + status = twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, + message >> 8, 0x15 /* PB_WORD_MSB */ ); + if (status >= 0) + return status; + + return twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, + message, 0x16 /* PB_WORD_LSB */ ); +} + +/*----------------------------------------------------------------------*/ + +/* + * Support for adjustable-voltage LDOs uses a four bit (or less) voltage + * select field in its control register. We use tables indexed by VSEL + * to record voltages in milliVolts. (Accuracy is about three percent.) + * + * Note that VSEL values for VAUX2 changed in twl5030 and newer silicon; + * currently handled by listing two slightly different VAUX2 regulators, + * only one of which will be configured. + * + * VSEL values documented as "TI cannot support these values" are flagged + * in these tables as UNSUP() values; we normally won't assign them. + * + * VAUX3 at 3V is incorrectly listed in some TI manuals as unsupported. + * TI are revising the twl5030/tps659x0 specs to support that 3.0V setting. + */ +#ifdef CONFIG_TWL4030_ALLOW_UNSUPPORTED +#define UNSUP_MASK 0x0000 +#else +#define UNSUP_MASK 0x8000 +#endif + +#define UNSUP(x) (UNSUP_MASK | (x)) +#define IS_UNSUP(x) (UNSUP_MASK & (x)) +#define LDO_MV(x) (~UNSUP_MASK & (x)) + + +static const u16 VAUX1_VSEL_table[] = { + UNSUP(1500), UNSUP(1800), 2500, 2800, + 3000, 3000, 3000, 3000, +}; +static const u16 VAUX2_4030_VSEL_table[] = { + UNSUP(1000), UNSUP(1000), UNSUP(1200), 1300, + 1500, 1800, UNSUP(1850), 2500, + UNSUP(2600), 2800, UNSUP(2850), UNSUP(3000), + UNSUP(3150), UNSUP(3150), UNSUP(3150), UNSUP(3150), +}; +static const u16 VAUX2_VSEL_table[] = { + 1700, 1700, 1900, 1300, + 1500, 1800, 2000, 2500, + 2100, 2800, 2200, 2300, + 2400, 2400, 2400, 2400, +}; +static const u16 VAUX3_VSEL_table[] = { + 1500, 1800, 2500, 2800, + 3000, 3000, 3000, 3000, +}; +static const u16 VAUX4_VSEL_table[] = { + 700, 1000, 1200, UNSUP(1300), + 1500, 1800, UNSUP(1850), 2500, + UNSUP(2600), 2800, UNSUP(2850), UNSUP(3000), + UNSUP(3150), UNSUP(3150), UNSUP(3150), UNSUP(3150), +}; +static const u16 VMMC1_VSEL_table[] = { + 1850, 2850, 3000, 3150, +}; +static const u16 VMMC2_VSEL_table[] = { + UNSUP(1000), UNSUP(1000), UNSUP(1200), UNSUP(1300), + UNSUP(1500), UNSUP(1800), 1850, UNSUP(2500), + 2600, 2800, 2850, 3000, + 3150, 3150, 3150, 3150, +}; +static const u16 VPLL1_VSEL_table[] = { + 1000, 1200, 1300, 1800, + UNSUP(2800), UNSUP(3000), UNSUP(3000), UNSUP(3000), +}; +static const u16 VPLL2_VSEL_table[] = { + 700, 1000, 1200, 1300, + UNSUP(1500), 1800, UNSUP(1850), UNSUP(2500), + UNSUP(2600), UNSUP(2800), UNSUP(2850), UNSUP(3000), + UNSUP(3150), UNSUP(3150), UNSUP(3150), UNSUP(3150), +}; +static const u16 VSIM_VSEL_table[] = { + UNSUP(1000), UNSUP(1200), UNSUP(1300), 1800, + 2800, 3000, 3000, 3000, +}; +static const u16 VDAC_VSEL_table[] = { + 1200, 1300, 1800, 1800, +}; + + +static int twl4030ldo_list_voltage(struct regulator_dev *rdev, unsigned index) +{ + struct twlreg_info *info = rdev_get_drvdata(rdev); + int mV = info->table[index]; + + return IS_UNSUP(mV) ? 0 : (LDO_MV(mV) * 1000); +} + +static int +twl4030ldo_set_voltage(struct regulator_dev *rdev, int min_uV, int max_uV) +{ + struct twlreg_info *info = rdev_get_drvdata(rdev); + int vsel; + + for (vsel = 0; vsel < info->table_len; vsel++) { + int mV = info->table[vsel]; + int uV; + + if (IS_UNSUP(mV)) + continue; + uV = LDO_MV(mV) * 1000; + + /* REVISIT for VAUX2, first match may not be best/lowest */ + + /* use the first in-range value */ + if (min_uV <= uV && uV <= max_uV) + return twl4030reg_write(info, VREG_DEDICATED, vsel); + } + + return -EDOM; +} + +static int twl4030ldo_get_voltage(struct regulator_dev *rdev) +{ + struct twlreg_info *info = rdev_get_drvdata(rdev); + int vsel = twl4030reg_read(info, VREG_DEDICATED); + + if (vsel < 0) + return vsel; + + vsel &= info->table_len - 1; + return LDO_MV(info->table[vsel]) * 1000; +} + +static struct regulator_ops twl4030ldo_ops = { + .list_voltage = twl4030ldo_list_voltage, + + .set_voltage = twl4030ldo_set_voltage, + .get_voltage = twl4030ldo_get_voltage, + + .enable = twl4030reg_enable, + .disable = twl4030reg_disable, + .is_enabled = twl4030reg_is_enabled, + + .set_mode = twl4030reg_set_mode, + + .get_status = twl4030reg_get_status, +}; + +/*----------------------------------------------------------------------*/ + +/* + * Fixed voltage LDOs don't have a VSEL field to update. + */ +static int twl4030fixed_list_voltage(struct regulator_dev *rdev, unsigned index) +{ + struct twlreg_info *info = rdev_get_drvdata(rdev); + + return info->min_mV * 1000; +} + +static int twl4030fixed_get_voltage(struct regulator_dev *rdev) +{ + struct twlreg_info *info = rdev_get_drvdata(rdev); + + return info->min_mV * 1000; +} + +static struct regulator_ops twl4030fixed_ops = { + .list_voltage = twl4030fixed_list_voltage, + + .get_voltage = twl4030fixed_get_voltage, + + .enable = twl4030reg_enable, + .disable = twl4030reg_disable, + .is_enabled = twl4030reg_is_enabled, + + .set_mode = twl4030reg_set_mode, + + .get_status = twl4030reg_get_status, +}; + +/*----------------------------------------------------------------------*/ + +#define TWL_ADJUSTABLE_LDO(label, offset, num) { \ + .base = offset, \ + .id = num, \ + .table_len = ARRAY_SIZE(label##_VSEL_table), \ + .table = label##_VSEL_table, \ + .desc = { \ + .name = #label, \ + .id = TWL4030_REG_##label, \ + .n_voltages = ARRAY_SIZE(label##_VSEL_table), \ + .ops = &twl4030ldo_ops, \ + .type = REGULATOR_VOLTAGE, \ + .owner = THIS_MODULE, \ + }, \ + } + +#define TWL_FIXED_LDO(label, offset, mVolts, num) { \ + .base = offset, \ + .id = num, \ + .min_mV = mVolts, \ + .desc = { \ + .name = #label, \ + .id = TWL4030_REG_##label, \ + .n_voltages = 1, \ + .ops = &twl4030fixed_ops, \ + .type = REGULATOR_VOLTAGE, \ + .owner = THIS_MODULE, \ + }, \ + } + +/* + * We list regulators here if systems need some level of + * software control over them after boot. + */ +static struct twlreg_info twl4030_regs[] = { + TWL_ADJUSTABLE_LDO(VAUX1, 0x17, 1), + TWL_ADJUSTABLE_LDO(VAUX2_4030, 0x1b, 2), + TWL_ADJUSTABLE_LDO(VAUX2, 0x1b, 2), + TWL_ADJUSTABLE_LDO(VAUX3, 0x1f, 3), + TWL_ADJUSTABLE_LDO(VAUX4, 0x23, 4), + TWL_ADJUSTABLE_LDO(VMMC1, 0x27, 5), + TWL_ADJUSTABLE_LDO(VMMC2, 0x2b, 6), + /* + TWL_ADJUSTABLE_LDO(VPLL1, 0x2f, 7), + */ + TWL_ADJUSTABLE_LDO(VPLL2, 0x33, 8), + TWL_ADJUSTABLE_LDO(VSIM, 0x37, 9), + TWL_ADJUSTABLE_LDO(VDAC, 0x3b, 10), + /* + TWL_ADJUSTABLE_LDO(VINTANA1, 0x3f, 11), + TWL_ADJUSTABLE_LDO(VINTANA2, 0x43, 12), + TWL_ADJUSTABLE_LDO(VINTDIG, 0x47, 13), + TWL_SMPS(VIO, 0x4b, 14), + TWL_SMPS(VDD1, 0x55, 15), + TWL_SMPS(VDD2, 0x63, 16), + */ + TWL_FIXED_LDO(VUSB1V5, 0x71, 1500, 17), + TWL_FIXED_LDO(VUSB1V8, 0x74, 1800, 18), + TWL_FIXED_LDO(VUSB3V1, 0x77, 3100, 19), + /* VUSBCP is managed *only* by the USB subchip */ +}; + +static int twl4030reg_probe(struct platform_device *pdev) +{ + int i; + struct twlreg_info *info; + struct regulator_init_data *initdata; + struct regulation_constraints *c; + struct regulator_dev *rdev; + + for (i = 0, info = NULL; i < ARRAY_SIZE(twl4030_regs); i++) { + if (twl4030_regs[i].desc.id != pdev->id) + continue; + info = twl4030_regs + i; + break; + } + if (!info) + return -ENODEV; + + initdata = pdev->dev.platform_data; + if (!initdata) + return -EINVAL; + + /* Constrain board-specific capabilities according to what + * this driver and the chip itself can actually do. + */ + c = &initdata->constraints; + c->valid_modes_mask &= REGULATOR_MODE_NORMAL | REGULATOR_MODE_STANDBY; + c->valid_ops_mask &= REGULATOR_CHANGE_VOLTAGE + | REGULATOR_CHANGE_MODE + | REGULATOR_CHANGE_STATUS; + + rdev = regulator_register(&info->desc, &pdev->dev, initdata, info); + if (IS_ERR(rdev)) { + dev_err(&pdev->dev, "can't register %s, %ld\n", + info->desc.name, PTR_ERR(rdev)); + return PTR_ERR(rdev); + } + platform_set_drvdata(pdev, rdev); + + /* NOTE: many regulators support short-circuit IRQs (presentable + * as REGULATOR_OVER_CURRENT notifications?) configured via: + * - SC_CONFIG + * - SC_DETECT1 (vintana2, vmmc1/2, vaux1/2/3/4) + * - SC_DETECT2 (vusb, vdac, vio, vdd1/2, vpll2) + * - IT_CONFIG + */ + + return 0; +} + +static int __devexit twl4030reg_remove(struct platform_device *pdev) +{ + regulator_unregister(platform_get_drvdata(pdev)); + return 0; +} + +MODULE_ALIAS("platform:twl4030_reg"); + +static struct platform_driver twl4030reg_driver = { + .probe = twl4030reg_probe, + .remove = __devexit_p(twl4030reg_remove), + /* NOTE: short name, to work around driver model truncation of + * "twl4030_regulator.12" (and friends) to "twl4030_regulator.1". + */ + .driver.name = "twl4030_reg", + .driver.owner = THIS_MODULE, +}; + +static int __init twl4030reg_init(void) +{ + return platform_driver_register(&twl4030reg_driver); +} +subsys_initcall(twl4030reg_init); + +static void __exit twl4030reg_exit(void) +{ + platform_driver_unregister(&twl4030reg_driver); +} +module_exit(twl4030reg_exit) + +MODULE_DESCRIPTION("TWL4030 regulator driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/regulator/twl4030-regulator.c b/drivers/regulator/twl4030-regulator.c deleted file mode 100644 index e2032fb60b55..000000000000 --- a/drivers/regulator/twl4030-regulator.c +++ /dev/null @@ -1,500 +0,0 @@ -/* - * twl4030-regulator.c -- support regulators in twl4030 family chips - * - * Copyright (C) 2008 David Brownell - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#include -#include -#include -#include -#include -#include -#include - - -/* - * The TWL4030/TW5030/TPS659x0 family chips include power management, a - * USB OTG transceiver, an RTC, ADC, PWM, and lots more. Some versions - * include an audio codec, battery charger, and more voltage regulators. - * These chips are often used in OMAP-based systems. - * - * This driver implements software-based resource control for various - * voltage regulators. This is usually augmented with state machine - * based control. - */ - -struct twlreg_info { - /* start of regulator's PM_RECEIVER control register bank */ - u8 base; - - /* twl4030 resource ID, for resource control state machine */ - u8 id; - - /* voltage in mV = table[VSEL]; table_len must be a power-of-two */ - u8 table_len; - const u16 *table; - - /* chip constraints on regulator behavior */ - u16 min_mV; - - /* used by regulator core */ - struct regulator_desc desc; -}; - - -/* LDO control registers ... offset is from the base of its register bank. - * The first three registers of all power resource banks help hardware to - * manage the various resource groups. - */ -#define VREG_GRP 0 -#define VREG_TYPE 1 -#define VREG_REMAP 2 -#define VREG_DEDICATED 3 /* LDO control */ - - -static inline int -twl4030reg_read(struct twlreg_info *info, unsigned offset) -{ - u8 value; - int status; - - status = twl4030_i2c_read_u8(TWL4030_MODULE_PM_RECEIVER, - &value, info->base + offset); - return (status < 0) ? status : value; -} - -static inline int -twl4030reg_write(struct twlreg_info *info, unsigned offset, u8 value) -{ - return twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, - value, info->base + offset); -} - -/*----------------------------------------------------------------------*/ - -/* generic power resource operations, which work on all regulators */ - -static int twl4030reg_grp(struct regulator_dev *rdev) -{ - return twl4030reg_read(rdev_get_drvdata(rdev), VREG_GRP); -} - -/* - * Enable/disable regulators by joining/leaving the P1 (processor) group. - * We assume nobody else is updating the DEV_GRP registers. - */ - -#define P3_GRP BIT(7) /* "peripherals" */ -#define P2_GRP BIT(6) /* secondary processor, modem, etc */ -#define P1_GRP BIT(5) /* CPU/Linux */ - -static int twl4030reg_is_enabled(struct regulator_dev *rdev) -{ - int state = twl4030reg_grp(rdev); - - if (state < 0) - return state; - - return (state & P1_GRP) != 0; -} - -static int twl4030reg_enable(struct regulator_dev *rdev) -{ - struct twlreg_info *info = rdev_get_drvdata(rdev); - int grp; - - grp = twl4030reg_read(info, VREG_GRP); - if (grp < 0) - return grp; - - grp |= P1_GRP; - return twl4030reg_write(info, VREG_GRP, grp); -} - -static int twl4030reg_disable(struct regulator_dev *rdev) -{ - struct twlreg_info *info = rdev_get_drvdata(rdev); - int grp; - - grp = twl4030reg_read(info, VREG_GRP); - if (grp < 0) - return grp; - - grp &= ~P1_GRP; - return twl4030reg_write(info, VREG_GRP, grp); -} - -static int twl4030reg_get_status(struct regulator_dev *rdev) -{ - int state = twl4030reg_grp(rdev); - - if (state < 0) - return state; - state &= 0x0f; - - /* assume state != WARM_RESET; we'd not be running... */ - if (!state) - return REGULATOR_STATUS_OFF; - return (state & BIT(3)) - ? REGULATOR_STATUS_NORMAL - : REGULATOR_STATUS_STANDBY; -} - -static int twl4030reg_set_mode(struct regulator_dev *rdev, unsigned mode) -{ - struct twlreg_info *info = rdev_get_drvdata(rdev); - unsigned message; - int status; - - /* We can only set the mode through state machine commands... */ - switch (mode) { - case REGULATOR_MODE_NORMAL: - message = MSG_SINGULAR(DEV_GRP_P1, info->id, RES_STATE_ACTIVE); - break; - case REGULATOR_MODE_STANDBY: - message = MSG_SINGULAR(DEV_GRP_P1, info->id, RES_STATE_SLEEP); - break; - default: - return -EINVAL; - } - - /* Ensure the resource is associated with some group */ - status = twl4030reg_grp(rdev); - if (status < 0) - return status; - if (!(status & (P3_GRP | P2_GRP | P1_GRP))) - return -EACCES; - - status = twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, - message >> 8, 0x15 /* PB_WORD_MSB */ ); - if (status >= 0) - return status; - - return twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, - message, 0x16 /* PB_WORD_LSB */ ); -} - -/*----------------------------------------------------------------------*/ - -/* - * Support for adjustable-voltage LDOs uses a four bit (or less) voltage - * select field in its control register. We use tables indexed by VSEL - * to record voltages in milliVolts. (Accuracy is about three percent.) - * - * Note that VSEL values for VAUX2 changed in twl5030 and newer silicon; - * currently handled by listing two slightly different VAUX2 regulators, - * only one of which will be configured. - * - * VSEL values documented as "TI cannot support these values" are flagged - * in these tables as UNSUP() values; we normally won't assign them. - * - * VAUX3 at 3V is incorrectly listed in some TI manuals as unsupported. - * TI are revising the twl5030/tps659x0 specs to support that 3.0V setting. - */ -#ifdef CONFIG_TWL4030_ALLOW_UNSUPPORTED -#define UNSUP_MASK 0x0000 -#else -#define UNSUP_MASK 0x8000 -#endif - -#define UNSUP(x) (UNSUP_MASK | (x)) -#define IS_UNSUP(x) (UNSUP_MASK & (x)) -#define LDO_MV(x) (~UNSUP_MASK & (x)) - - -static const u16 VAUX1_VSEL_table[] = { - UNSUP(1500), UNSUP(1800), 2500, 2800, - 3000, 3000, 3000, 3000, -}; -static const u16 VAUX2_4030_VSEL_table[] = { - UNSUP(1000), UNSUP(1000), UNSUP(1200), 1300, - 1500, 1800, UNSUP(1850), 2500, - UNSUP(2600), 2800, UNSUP(2850), UNSUP(3000), - UNSUP(3150), UNSUP(3150), UNSUP(3150), UNSUP(3150), -}; -static const u16 VAUX2_VSEL_table[] = { - 1700, 1700, 1900, 1300, - 1500, 1800, 2000, 2500, - 2100, 2800, 2200, 2300, - 2400, 2400, 2400, 2400, -}; -static const u16 VAUX3_VSEL_table[] = { - 1500, 1800, 2500, 2800, - 3000, 3000, 3000, 3000, -}; -static const u16 VAUX4_VSEL_table[] = { - 700, 1000, 1200, UNSUP(1300), - 1500, 1800, UNSUP(1850), 2500, - UNSUP(2600), 2800, UNSUP(2850), UNSUP(3000), - UNSUP(3150), UNSUP(3150), UNSUP(3150), UNSUP(3150), -}; -static const u16 VMMC1_VSEL_table[] = { - 1850, 2850, 3000, 3150, -}; -static const u16 VMMC2_VSEL_table[] = { - UNSUP(1000), UNSUP(1000), UNSUP(1200), UNSUP(1300), - UNSUP(1500), UNSUP(1800), 1850, UNSUP(2500), - 2600, 2800, 2850, 3000, - 3150, 3150, 3150, 3150, -}; -static const u16 VPLL1_VSEL_table[] = { - 1000, 1200, 1300, 1800, - UNSUP(2800), UNSUP(3000), UNSUP(3000), UNSUP(3000), -}; -static const u16 VPLL2_VSEL_table[] = { - 700, 1000, 1200, 1300, - UNSUP(1500), 1800, UNSUP(1850), UNSUP(2500), - UNSUP(2600), UNSUP(2800), UNSUP(2850), UNSUP(3000), - UNSUP(3150), UNSUP(3150), UNSUP(3150), UNSUP(3150), -}; -static const u16 VSIM_VSEL_table[] = { - UNSUP(1000), UNSUP(1200), UNSUP(1300), 1800, - 2800, 3000, 3000, 3000, -}; -static const u16 VDAC_VSEL_table[] = { - 1200, 1300, 1800, 1800, -}; - - -static int twl4030ldo_list_voltage(struct regulator_dev *rdev, unsigned index) -{ - struct twlreg_info *info = rdev_get_drvdata(rdev); - int mV = info->table[index]; - - return IS_UNSUP(mV) ? 0 : (LDO_MV(mV) * 1000); -} - -static int -twl4030ldo_set_voltage(struct regulator_dev *rdev, int min_uV, int max_uV) -{ - struct twlreg_info *info = rdev_get_drvdata(rdev); - int vsel; - - for (vsel = 0; vsel < info->table_len; vsel++) { - int mV = info->table[vsel]; - int uV; - - if (IS_UNSUP(mV)) - continue; - uV = LDO_MV(mV) * 1000; - - /* REVISIT for VAUX2, first match may not be best/lowest */ - - /* use the first in-range value */ - if (min_uV <= uV && uV <= max_uV) - return twl4030reg_write(info, VREG_DEDICATED, vsel); - } - - return -EDOM; -} - -static int twl4030ldo_get_voltage(struct regulator_dev *rdev) -{ - struct twlreg_info *info = rdev_get_drvdata(rdev); - int vsel = twl4030reg_read(info, VREG_DEDICATED); - - if (vsel < 0) - return vsel; - - vsel &= info->table_len - 1; - return LDO_MV(info->table[vsel]) * 1000; -} - -static struct regulator_ops twl4030ldo_ops = { - .list_voltage = twl4030ldo_list_voltage, - - .set_voltage = twl4030ldo_set_voltage, - .get_voltage = twl4030ldo_get_voltage, - - .enable = twl4030reg_enable, - .disable = twl4030reg_disable, - .is_enabled = twl4030reg_is_enabled, - - .set_mode = twl4030reg_set_mode, - - .get_status = twl4030reg_get_status, -}; - -/*----------------------------------------------------------------------*/ - -/* - * Fixed voltage LDOs don't have a VSEL field to update. - */ -static int twl4030fixed_list_voltage(struct regulator_dev *rdev, unsigned index) -{ - struct twlreg_info *info = rdev_get_drvdata(rdev); - - return info->min_mV * 1000; -} - -static int twl4030fixed_get_voltage(struct regulator_dev *rdev) -{ - struct twlreg_info *info = rdev_get_drvdata(rdev); - - return info->min_mV * 1000; -} - -static struct regulator_ops twl4030fixed_ops = { - .list_voltage = twl4030fixed_list_voltage, - - .get_voltage = twl4030fixed_get_voltage, - - .enable = twl4030reg_enable, - .disable = twl4030reg_disable, - .is_enabled = twl4030reg_is_enabled, - - .set_mode = twl4030reg_set_mode, - - .get_status = twl4030reg_get_status, -}; - -/*----------------------------------------------------------------------*/ - -#define TWL_ADJUSTABLE_LDO(label, offset, num) { \ - .base = offset, \ - .id = num, \ - .table_len = ARRAY_SIZE(label##_VSEL_table), \ - .table = label##_VSEL_table, \ - .desc = { \ - .name = #label, \ - .id = TWL4030_REG_##label, \ - .n_voltages = ARRAY_SIZE(label##_VSEL_table), \ - .ops = &twl4030ldo_ops, \ - .type = REGULATOR_VOLTAGE, \ - .owner = THIS_MODULE, \ - }, \ - } - -#define TWL_FIXED_LDO(label, offset, mVolts, num) { \ - .base = offset, \ - .id = num, \ - .min_mV = mVolts, \ - .desc = { \ - .name = #label, \ - .id = TWL4030_REG_##label, \ - .n_voltages = 1, \ - .ops = &twl4030fixed_ops, \ - .type = REGULATOR_VOLTAGE, \ - .owner = THIS_MODULE, \ - }, \ - } - -/* - * We list regulators here if systems need some level of - * software control over them after boot. - */ -static struct twlreg_info twl4030_regs[] = { - TWL_ADJUSTABLE_LDO(VAUX1, 0x17, 1), - TWL_ADJUSTABLE_LDO(VAUX2_4030, 0x1b, 2), - TWL_ADJUSTABLE_LDO(VAUX2, 0x1b, 2), - TWL_ADJUSTABLE_LDO(VAUX3, 0x1f, 3), - TWL_ADJUSTABLE_LDO(VAUX4, 0x23, 4), - TWL_ADJUSTABLE_LDO(VMMC1, 0x27, 5), - TWL_ADJUSTABLE_LDO(VMMC2, 0x2b, 6), - /* - TWL_ADJUSTABLE_LDO(VPLL1, 0x2f, 7), - */ - TWL_ADJUSTABLE_LDO(VPLL2, 0x33, 8), - TWL_ADJUSTABLE_LDO(VSIM, 0x37, 9), - TWL_ADJUSTABLE_LDO(VDAC, 0x3b, 10), - /* - TWL_ADJUSTABLE_LDO(VINTANA1, 0x3f, 11), - TWL_ADJUSTABLE_LDO(VINTANA2, 0x43, 12), - TWL_ADJUSTABLE_LDO(VINTDIG, 0x47, 13), - TWL_SMPS(VIO, 0x4b, 14), - TWL_SMPS(VDD1, 0x55, 15), - TWL_SMPS(VDD2, 0x63, 16), - */ - TWL_FIXED_LDO(VUSB1V5, 0x71, 1500, 17), - TWL_FIXED_LDO(VUSB1V8, 0x74, 1800, 18), - TWL_FIXED_LDO(VUSB3V1, 0x77, 3100, 19), - /* VUSBCP is managed *only* by the USB subchip */ -}; - -static int twl4030reg_probe(struct platform_device *pdev) -{ - int i; - struct twlreg_info *info; - struct regulator_init_data *initdata; - struct regulation_constraints *c; - struct regulator_dev *rdev; - - for (i = 0, info = NULL; i < ARRAY_SIZE(twl4030_regs); i++) { - if (twl4030_regs[i].desc.id != pdev->id) - continue; - info = twl4030_regs + i; - break; - } - if (!info) - return -ENODEV; - - initdata = pdev->dev.platform_data; - if (!initdata) - return -EINVAL; - - /* Constrain board-specific capabilities according to what - * this driver and the chip itself can actually do. - */ - c = &initdata->constraints; - c->valid_modes_mask &= REGULATOR_MODE_NORMAL | REGULATOR_MODE_STANDBY; - c->valid_ops_mask &= REGULATOR_CHANGE_VOLTAGE - | REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS; - - rdev = regulator_register(&info->desc, &pdev->dev, initdata, info); - if (IS_ERR(rdev)) { - dev_err(&pdev->dev, "can't register %s, %ld\n", - info->desc.name, PTR_ERR(rdev)); - return PTR_ERR(rdev); - } - platform_set_drvdata(pdev, rdev); - - /* NOTE: many regulators support short-circuit IRQs (presentable - * as REGULATOR_OVER_CURRENT notifications?) configured via: - * - SC_CONFIG - * - SC_DETECT1 (vintana2, vmmc1/2, vaux1/2/3/4) - * - SC_DETECT2 (vusb, vdac, vio, vdd1/2, vpll2) - * - IT_CONFIG - */ - - return 0; -} - -static int __devexit twl4030reg_remove(struct platform_device *pdev) -{ - regulator_unregister(platform_get_drvdata(pdev)); - return 0; -} - -MODULE_ALIAS("platform:twl4030_reg"); - -static struct platform_driver twl4030reg_driver = { - .probe = twl4030reg_probe, - .remove = __devexit_p(twl4030reg_remove), - /* NOTE: short name, to work around driver model truncation of - * "twl4030_regulator.12" (and friends) to "twl4030_regulator.1". - */ - .driver.name = "twl4030_reg", - .driver.owner = THIS_MODULE, -}; - -static int __init twl4030reg_init(void) -{ - return platform_driver_register(&twl4030reg_driver); -} -subsys_initcall(twl4030reg_init); - -static void __exit twl4030reg_exit(void) -{ - platform_driver_unregister(&twl4030reg_driver); -} -module_exit(twl4030reg_exit) - -MODULE_DESCRIPTION("TWL4030 regulator driver"); -MODULE_LICENSE("GPL"); diff --git a/drivers/rtc/Makefile b/drivers/rtc/Makefile index af1ba7ae2857..7da6efb3e953 100644 --- a/drivers/rtc/Makefile +++ b/drivers/rtc/Makefile @@ -80,7 +80,7 @@ obj-$(CONFIG_RTC_DRV_STK17TA8) += rtc-stk17ta8.o obj-$(CONFIG_RTC_DRV_STMP) += rtc-stmp3xxx.o obj-$(CONFIG_RTC_DRV_SUN4V) += rtc-sun4v.o obj-$(CONFIG_RTC_DRV_TEST) += rtc-test.o -obj-$(CONFIG_RTC_DRV_TWL4030) += rtc-twl4030.o +obj-$(CONFIG_RTC_DRV_TWL4030) += rtc-twl.o obj-$(CONFIG_RTC_DRV_TX4939) += rtc-tx4939.o obj-$(CONFIG_RTC_DRV_V3020) += rtc-v3020.o obj-$(CONFIG_RTC_DRV_VR41XX) += rtc-vr41xx.o diff --git a/drivers/rtc/rtc-twl.c b/drivers/rtc/rtc-twl.c new file mode 100644 index 000000000000..93565be12fae --- /dev/null +++ b/drivers/rtc/rtc-twl.c @@ -0,0 +1,540 @@ +/* + * rtc-twl4030.c -- TWL4030 Real Time Clock interface + * + * Copyright (C) 2007 MontaVista Software, Inc + * Author: Alexandre Rusev + * + * Based on original TI driver twl4030-rtc.c + * Copyright (C) 2006 Texas Instruments, Inc. + * + * Based on rtc-omap.c + * Copyright (C) 2003 MontaVista Software, Inc. + * Author: George G. Davis or + * Copyright (C) 2006 David Brownell + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include + + +/* + * RTC block register offsets (use TWL_MODULE_RTC) + */ +#define REG_SECONDS_REG 0x00 +#define REG_MINUTES_REG 0x01 +#define REG_HOURS_REG 0x02 +#define REG_DAYS_REG 0x03 +#define REG_MONTHS_REG 0x04 +#define REG_YEARS_REG 0x05 +#define REG_WEEKS_REG 0x06 + +#define REG_ALARM_SECONDS_REG 0x07 +#define REG_ALARM_MINUTES_REG 0x08 +#define REG_ALARM_HOURS_REG 0x09 +#define REG_ALARM_DAYS_REG 0x0A +#define REG_ALARM_MONTHS_REG 0x0B +#define REG_ALARM_YEARS_REG 0x0C + +#define REG_RTC_CTRL_REG 0x0D +#define REG_RTC_STATUS_REG 0x0E +#define REG_RTC_INTERRUPTS_REG 0x0F + +#define REG_RTC_COMP_LSB_REG 0x10 +#define REG_RTC_COMP_MSB_REG 0x11 + +/* RTC_CTRL_REG bitfields */ +#define BIT_RTC_CTRL_REG_STOP_RTC_M 0x01 +#define BIT_RTC_CTRL_REG_ROUND_30S_M 0x02 +#define BIT_RTC_CTRL_REG_AUTO_COMP_M 0x04 +#define BIT_RTC_CTRL_REG_MODE_12_24_M 0x08 +#define BIT_RTC_CTRL_REG_TEST_MODE_M 0x10 +#define BIT_RTC_CTRL_REG_SET_32_COUNTER_M 0x20 +#define BIT_RTC_CTRL_REG_GET_TIME_M 0x40 + +/* RTC_STATUS_REG bitfields */ +#define BIT_RTC_STATUS_REG_RUN_M 0x02 +#define BIT_RTC_STATUS_REG_1S_EVENT_M 0x04 +#define BIT_RTC_STATUS_REG_1M_EVENT_M 0x08 +#define BIT_RTC_STATUS_REG_1H_EVENT_M 0x10 +#define BIT_RTC_STATUS_REG_1D_EVENT_M 0x20 +#define BIT_RTC_STATUS_REG_ALARM_M 0x40 +#define BIT_RTC_STATUS_REG_POWER_UP_M 0x80 + +/* RTC_INTERRUPTS_REG bitfields */ +#define BIT_RTC_INTERRUPTS_REG_EVERY_M 0x03 +#define BIT_RTC_INTERRUPTS_REG_IT_TIMER_M 0x04 +#define BIT_RTC_INTERRUPTS_REG_IT_ALARM_M 0x08 + + +/* REG_SECONDS_REG through REG_YEARS_REG is how many registers? */ +#define ALL_TIME_REGS 6 + +/*----------------------------------------------------------------------*/ + +/* + * Supports 1 byte read from TWL4030 RTC register. + */ +static int twl4030_rtc_read_u8(u8 *data, u8 reg) +{ + int ret; + + ret = twl4030_i2c_read_u8(TWL4030_MODULE_RTC, data, reg); + if (ret < 0) + pr_err("twl4030_rtc: Could not read TWL4030" + "register %X - error %d\n", reg, ret); + return ret; +} + +/* + * Supports 1 byte write to TWL4030 RTC registers. + */ +static int twl4030_rtc_write_u8(u8 data, u8 reg) +{ + int ret; + + ret = twl4030_i2c_write_u8(TWL4030_MODULE_RTC, data, reg); + if (ret < 0) + pr_err("twl4030_rtc: Could not write TWL4030" + "register %X - error %d\n", reg, ret); + return ret; +} + +/* + * Cache the value for timer/alarm interrupts register; this is + * only changed by callers holding rtc ops lock (or resume). + */ +static unsigned char rtc_irq_bits; + +/* + * Enable 1/second update and/or alarm interrupts. + */ +static int set_rtc_irq_bit(unsigned char bit) +{ + unsigned char val; + int ret; + + val = rtc_irq_bits | bit; + val &= ~BIT_RTC_INTERRUPTS_REG_EVERY_M; + ret = twl4030_rtc_write_u8(val, REG_RTC_INTERRUPTS_REG); + if (ret == 0) + rtc_irq_bits = val; + + return ret; +} + +/* + * Disable update and/or alarm interrupts. + */ +static int mask_rtc_irq_bit(unsigned char bit) +{ + unsigned char val; + int ret; + + val = rtc_irq_bits & ~bit; + ret = twl4030_rtc_write_u8(val, REG_RTC_INTERRUPTS_REG); + if (ret == 0) + rtc_irq_bits = val; + + return ret; +} + +static int twl4030_rtc_alarm_irq_enable(struct device *dev, unsigned enabled) +{ + int ret; + + if (enabled) + ret = set_rtc_irq_bit(BIT_RTC_INTERRUPTS_REG_IT_ALARM_M); + else + ret = mask_rtc_irq_bit(BIT_RTC_INTERRUPTS_REG_IT_ALARM_M); + + return ret; +} + +static int twl4030_rtc_update_irq_enable(struct device *dev, unsigned enabled) +{ + int ret; + + if (enabled) + ret = set_rtc_irq_bit(BIT_RTC_INTERRUPTS_REG_IT_TIMER_M); + else + ret = mask_rtc_irq_bit(BIT_RTC_INTERRUPTS_REG_IT_TIMER_M); + + return ret; +} + +/* + * Gets current TWL4030 RTC time and date parameters. + * + * The RTC's time/alarm representation is not what gmtime(3) requires + * Linux to use: + * + * - Months are 1..12 vs Linux 0-11 + * - Years are 0..99 vs Linux 1900..N (we assume 21st century) + */ +static int twl4030_rtc_read_time(struct device *dev, struct rtc_time *tm) +{ + unsigned char rtc_data[ALL_TIME_REGS + 1]; + int ret; + u8 save_control; + + ret = twl4030_rtc_read_u8(&save_control, REG_RTC_CTRL_REG); + if (ret < 0) + return ret; + + save_control |= BIT_RTC_CTRL_REG_GET_TIME_M; + + ret = twl4030_rtc_write_u8(save_control, REG_RTC_CTRL_REG); + if (ret < 0) + return ret; + + ret = twl4030_i2c_read(TWL4030_MODULE_RTC, rtc_data, + REG_SECONDS_REG, ALL_TIME_REGS); + + if (ret < 0) { + dev_err(dev, "rtc_read_time error %d\n", ret); + return ret; + } + + tm->tm_sec = bcd2bin(rtc_data[0]); + tm->tm_min = bcd2bin(rtc_data[1]); + tm->tm_hour = bcd2bin(rtc_data[2]); + tm->tm_mday = bcd2bin(rtc_data[3]); + tm->tm_mon = bcd2bin(rtc_data[4]) - 1; + tm->tm_year = bcd2bin(rtc_data[5]) + 100; + + return ret; +} + +static int twl4030_rtc_set_time(struct device *dev, struct rtc_time *tm) +{ + unsigned char save_control; + unsigned char rtc_data[ALL_TIME_REGS + 1]; + int ret; + + rtc_data[1] = bin2bcd(tm->tm_sec); + rtc_data[2] = bin2bcd(tm->tm_min); + rtc_data[3] = bin2bcd(tm->tm_hour); + rtc_data[4] = bin2bcd(tm->tm_mday); + rtc_data[5] = bin2bcd(tm->tm_mon + 1); + rtc_data[6] = bin2bcd(tm->tm_year - 100); + + /* Stop RTC while updating the TC registers */ + ret = twl4030_rtc_read_u8(&save_control, REG_RTC_CTRL_REG); + if (ret < 0) + goto out; + + save_control &= ~BIT_RTC_CTRL_REG_STOP_RTC_M; + twl4030_rtc_write_u8(save_control, REG_RTC_CTRL_REG); + if (ret < 0) + goto out; + + /* update all the time registers in one shot */ + ret = twl4030_i2c_write(TWL4030_MODULE_RTC, rtc_data, + REG_SECONDS_REG, ALL_TIME_REGS); + if (ret < 0) { + dev_err(dev, "rtc_set_time error %d\n", ret); + goto out; + } + + /* Start back RTC */ + save_control |= BIT_RTC_CTRL_REG_STOP_RTC_M; + ret = twl4030_rtc_write_u8(save_control, REG_RTC_CTRL_REG); + +out: + return ret; +} + +/* + * Gets current TWL4030 RTC alarm time. + */ +static int twl4030_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alm) +{ + unsigned char rtc_data[ALL_TIME_REGS + 1]; + int ret; + + ret = twl4030_i2c_read(TWL4030_MODULE_RTC, rtc_data, + REG_ALARM_SECONDS_REG, ALL_TIME_REGS); + if (ret < 0) { + dev_err(dev, "rtc_read_alarm error %d\n", ret); + return ret; + } + + /* some of these fields may be wildcard/"match all" */ + alm->time.tm_sec = bcd2bin(rtc_data[0]); + alm->time.tm_min = bcd2bin(rtc_data[1]); + alm->time.tm_hour = bcd2bin(rtc_data[2]); + alm->time.tm_mday = bcd2bin(rtc_data[3]); + alm->time.tm_mon = bcd2bin(rtc_data[4]) - 1; + alm->time.tm_year = bcd2bin(rtc_data[5]) + 100; + + /* report cached alarm enable state */ + if (rtc_irq_bits & BIT_RTC_INTERRUPTS_REG_IT_ALARM_M) + alm->enabled = 1; + + return ret; +} + +static int twl4030_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alm) +{ + unsigned char alarm_data[ALL_TIME_REGS + 1]; + int ret; + + ret = twl4030_rtc_alarm_irq_enable(dev, 0); + if (ret) + goto out; + + alarm_data[1] = bin2bcd(alm->time.tm_sec); + alarm_data[2] = bin2bcd(alm->time.tm_min); + alarm_data[3] = bin2bcd(alm->time.tm_hour); + alarm_data[4] = bin2bcd(alm->time.tm_mday); + alarm_data[5] = bin2bcd(alm->time.tm_mon + 1); + alarm_data[6] = bin2bcd(alm->time.tm_year - 100); + + /* update all the alarm registers in one shot */ + ret = twl4030_i2c_write(TWL4030_MODULE_RTC, alarm_data, + REG_ALARM_SECONDS_REG, ALL_TIME_REGS); + if (ret) { + dev_err(dev, "rtc_set_alarm error %d\n", ret); + goto out; + } + + if (alm->enabled) + ret = twl4030_rtc_alarm_irq_enable(dev, 1); +out: + return ret; +} + +static irqreturn_t twl4030_rtc_interrupt(int irq, void *rtc) +{ + unsigned long events = 0; + int ret = IRQ_NONE; + int res; + u8 rd_reg; + +#ifdef CONFIG_LOCKDEP + /* WORKAROUND for lockdep forcing IRQF_DISABLED on us, which + * we don't want and can't tolerate. Although it might be + * friendlier not to borrow this thread context... + */ + local_irq_enable(); +#endif + + res = twl4030_rtc_read_u8(&rd_reg, REG_RTC_STATUS_REG); + if (res) + goto out; + /* + * Figure out source of interrupt: ALARM or TIMER in RTC_STATUS_REG. + * only one (ALARM or RTC) interrupt source may be enabled + * at time, we also could check our results + * by reading RTS_INTERRUPTS_REGISTER[IT_TIMER,IT_ALARM] + */ + if (rd_reg & BIT_RTC_STATUS_REG_ALARM_M) + events |= RTC_IRQF | RTC_AF; + else + events |= RTC_IRQF | RTC_UF; + + res = twl4030_rtc_write_u8(rd_reg | BIT_RTC_STATUS_REG_ALARM_M, + REG_RTC_STATUS_REG); + if (res) + goto out; + + /* Clear on Read enabled. RTC_IT bit of TWL4030_INT_PWR_ISR1 + * needs 2 reads to clear the interrupt. One read is done in + * do_twl4030_pwrirq(). Doing the second read, to clear + * the bit. + * + * FIXME the reason PWR_ISR1 needs an extra read is that + * RTC_IF retriggered until we cleared REG_ALARM_M above. + * But re-reading like this is a bad hack; by doing so we + * risk wrongly clearing status for some other IRQ (losing + * the interrupt). Be smarter about handling RTC_UF ... + */ + res = twl4030_i2c_read_u8(TWL4030_MODULE_INT, + &rd_reg, TWL4030_INT_PWR_ISR1); + if (res) + goto out; + + /* Notify RTC core on event */ + rtc_update_irq(rtc, 1, events); + + ret = IRQ_HANDLED; +out: + return ret; +} + +static struct rtc_class_ops twl4030_rtc_ops = { + .read_time = twl4030_rtc_read_time, + .set_time = twl4030_rtc_set_time, + .read_alarm = twl4030_rtc_read_alarm, + .set_alarm = twl4030_rtc_set_alarm, + .alarm_irq_enable = twl4030_rtc_alarm_irq_enable, + .update_irq_enable = twl4030_rtc_update_irq_enable, +}; + +/*----------------------------------------------------------------------*/ + +static int __devinit twl4030_rtc_probe(struct platform_device *pdev) +{ + struct rtc_device *rtc; + int ret = 0; + int irq = platform_get_irq(pdev, 0); + u8 rd_reg; + + if (irq <= 0) + return -EINVAL; + + rtc = rtc_device_register(pdev->name, + &pdev->dev, &twl4030_rtc_ops, THIS_MODULE); + if (IS_ERR(rtc)) { + ret = PTR_ERR(rtc); + dev_err(&pdev->dev, "can't register RTC device, err %ld\n", + PTR_ERR(rtc)); + goto out0; + + } + + platform_set_drvdata(pdev, rtc); + + ret = twl4030_rtc_read_u8(&rd_reg, REG_RTC_STATUS_REG); + if (ret < 0) + goto out1; + + if (rd_reg & BIT_RTC_STATUS_REG_POWER_UP_M) + dev_warn(&pdev->dev, "Power up reset detected.\n"); + + if (rd_reg & BIT_RTC_STATUS_REG_ALARM_M) + dev_warn(&pdev->dev, "Pending Alarm interrupt detected.\n"); + + /* Clear RTC Power up reset and pending alarm interrupts */ + ret = twl4030_rtc_write_u8(rd_reg, REG_RTC_STATUS_REG); + if (ret < 0) + goto out1; + + ret = request_irq(irq, twl4030_rtc_interrupt, + IRQF_TRIGGER_RISING, + dev_name(&rtc->dev), rtc); + if (ret < 0) { + dev_err(&pdev->dev, "IRQ is not free.\n"); + goto out1; + } + + /* Check RTC module status, Enable if it is off */ + ret = twl4030_rtc_read_u8(&rd_reg, REG_RTC_CTRL_REG); + if (ret < 0) + goto out2; + + if (!(rd_reg & BIT_RTC_CTRL_REG_STOP_RTC_M)) { + dev_info(&pdev->dev, "Enabling TWL4030-RTC.\n"); + rd_reg = BIT_RTC_CTRL_REG_STOP_RTC_M; + ret = twl4030_rtc_write_u8(rd_reg, REG_RTC_CTRL_REG); + if (ret < 0) + goto out2; + } + + /* init cached IRQ enable bits */ + ret = twl4030_rtc_read_u8(&rtc_irq_bits, REG_RTC_INTERRUPTS_REG); + if (ret < 0) + goto out2; + + return ret; + +out2: + free_irq(irq, rtc); +out1: + rtc_device_unregister(rtc); +out0: + return ret; +} + +/* + * Disable all TWL4030 RTC module interrupts. + * Sets status flag to free. + */ +static int __devexit twl4030_rtc_remove(struct platform_device *pdev) +{ + /* leave rtc running, but disable irqs */ + struct rtc_device *rtc = platform_get_drvdata(pdev); + int irq = platform_get_irq(pdev, 0); + + mask_rtc_irq_bit(BIT_RTC_INTERRUPTS_REG_IT_ALARM_M); + mask_rtc_irq_bit(BIT_RTC_INTERRUPTS_REG_IT_TIMER_M); + + free_irq(irq, rtc); + + rtc_device_unregister(rtc); + platform_set_drvdata(pdev, NULL); + return 0; +} + +static void twl4030_rtc_shutdown(struct platform_device *pdev) +{ + /* mask timer interrupts, but leave alarm interrupts on to enable + power-on when alarm is triggered */ + mask_rtc_irq_bit(BIT_RTC_INTERRUPTS_REG_IT_TIMER_M); +} + +#ifdef CONFIG_PM + +static unsigned char irqstat; + +static int twl4030_rtc_suspend(struct platform_device *pdev, pm_message_t state) +{ + irqstat = rtc_irq_bits; + + mask_rtc_irq_bit(BIT_RTC_INTERRUPTS_REG_IT_TIMER_M); + return 0; +} + +static int twl4030_rtc_resume(struct platform_device *pdev) +{ + set_rtc_irq_bit(irqstat); + return 0; +} + +#else +#define twl4030_rtc_suspend NULL +#define twl4030_rtc_resume NULL +#endif + +MODULE_ALIAS("platform:twl4030_rtc"); + +static struct platform_driver twl4030rtc_driver = { + .probe = twl4030_rtc_probe, + .remove = __devexit_p(twl4030_rtc_remove), + .shutdown = twl4030_rtc_shutdown, + .suspend = twl4030_rtc_suspend, + .resume = twl4030_rtc_resume, + .driver = { + .owner = THIS_MODULE, + .name = "twl4030_rtc", + }, +}; + +static int __init twl4030_rtc_init(void) +{ + return platform_driver_register(&twl4030rtc_driver); +} +module_init(twl4030_rtc_init); + +static void __exit twl4030_rtc_exit(void) +{ + platform_driver_unregister(&twl4030rtc_driver); +} +module_exit(twl4030_rtc_exit); + +MODULE_AUTHOR("Texas Instruments, MontaVista Software"); +MODULE_LICENSE("GPL"); diff --git a/drivers/rtc/rtc-twl4030.c b/drivers/rtc/rtc-twl4030.c deleted file mode 100644 index 9c8c70c497dc..000000000000 --- a/drivers/rtc/rtc-twl4030.c +++ /dev/null @@ -1,540 +0,0 @@ -/* - * rtc-twl4030.c -- TWL4030 Real Time Clock interface - * - * Copyright (C) 2007 MontaVista Software, Inc - * Author: Alexandre Rusev - * - * Based on original TI driver twl4030-rtc.c - * Copyright (C) 2006 Texas Instruments, Inc. - * - * Based on rtc-omap.c - * Copyright (C) 2003 MontaVista Software, Inc. - * Author: George G. Davis or - * Copyright (C) 2006 David Brownell - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include - - -/* - * RTC block register offsets (use TWL_MODULE_RTC) - */ -#define REG_SECONDS_REG 0x00 -#define REG_MINUTES_REG 0x01 -#define REG_HOURS_REG 0x02 -#define REG_DAYS_REG 0x03 -#define REG_MONTHS_REG 0x04 -#define REG_YEARS_REG 0x05 -#define REG_WEEKS_REG 0x06 - -#define REG_ALARM_SECONDS_REG 0x07 -#define REG_ALARM_MINUTES_REG 0x08 -#define REG_ALARM_HOURS_REG 0x09 -#define REG_ALARM_DAYS_REG 0x0A -#define REG_ALARM_MONTHS_REG 0x0B -#define REG_ALARM_YEARS_REG 0x0C - -#define REG_RTC_CTRL_REG 0x0D -#define REG_RTC_STATUS_REG 0x0E -#define REG_RTC_INTERRUPTS_REG 0x0F - -#define REG_RTC_COMP_LSB_REG 0x10 -#define REG_RTC_COMP_MSB_REG 0x11 - -/* RTC_CTRL_REG bitfields */ -#define BIT_RTC_CTRL_REG_STOP_RTC_M 0x01 -#define BIT_RTC_CTRL_REG_ROUND_30S_M 0x02 -#define BIT_RTC_CTRL_REG_AUTO_COMP_M 0x04 -#define BIT_RTC_CTRL_REG_MODE_12_24_M 0x08 -#define BIT_RTC_CTRL_REG_TEST_MODE_M 0x10 -#define BIT_RTC_CTRL_REG_SET_32_COUNTER_M 0x20 -#define BIT_RTC_CTRL_REG_GET_TIME_M 0x40 - -/* RTC_STATUS_REG bitfields */ -#define BIT_RTC_STATUS_REG_RUN_M 0x02 -#define BIT_RTC_STATUS_REG_1S_EVENT_M 0x04 -#define BIT_RTC_STATUS_REG_1M_EVENT_M 0x08 -#define BIT_RTC_STATUS_REG_1H_EVENT_M 0x10 -#define BIT_RTC_STATUS_REG_1D_EVENT_M 0x20 -#define BIT_RTC_STATUS_REG_ALARM_M 0x40 -#define BIT_RTC_STATUS_REG_POWER_UP_M 0x80 - -/* RTC_INTERRUPTS_REG bitfields */ -#define BIT_RTC_INTERRUPTS_REG_EVERY_M 0x03 -#define BIT_RTC_INTERRUPTS_REG_IT_TIMER_M 0x04 -#define BIT_RTC_INTERRUPTS_REG_IT_ALARM_M 0x08 - - -/* REG_SECONDS_REG through REG_YEARS_REG is how many registers? */ -#define ALL_TIME_REGS 6 - -/*----------------------------------------------------------------------*/ - -/* - * Supports 1 byte read from TWL4030 RTC register. - */ -static int twl4030_rtc_read_u8(u8 *data, u8 reg) -{ - int ret; - - ret = twl4030_i2c_read_u8(TWL4030_MODULE_RTC, data, reg); - if (ret < 0) - pr_err("twl4030_rtc: Could not read TWL4030" - "register %X - error %d\n", reg, ret); - return ret; -} - -/* - * Supports 1 byte write to TWL4030 RTC registers. - */ -static int twl4030_rtc_write_u8(u8 data, u8 reg) -{ - int ret; - - ret = twl4030_i2c_write_u8(TWL4030_MODULE_RTC, data, reg); - if (ret < 0) - pr_err("twl4030_rtc: Could not write TWL4030" - "register %X - error %d\n", reg, ret); - return ret; -} - -/* - * Cache the value for timer/alarm interrupts register; this is - * only changed by callers holding rtc ops lock (or resume). - */ -static unsigned char rtc_irq_bits; - -/* - * Enable 1/second update and/or alarm interrupts. - */ -static int set_rtc_irq_bit(unsigned char bit) -{ - unsigned char val; - int ret; - - val = rtc_irq_bits | bit; - val &= ~BIT_RTC_INTERRUPTS_REG_EVERY_M; - ret = twl4030_rtc_write_u8(val, REG_RTC_INTERRUPTS_REG); - if (ret == 0) - rtc_irq_bits = val; - - return ret; -} - -/* - * Disable update and/or alarm interrupts. - */ -static int mask_rtc_irq_bit(unsigned char bit) -{ - unsigned char val; - int ret; - - val = rtc_irq_bits & ~bit; - ret = twl4030_rtc_write_u8(val, REG_RTC_INTERRUPTS_REG); - if (ret == 0) - rtc_irq_bits = val; - - return ret; -} - -static int twl4030_rtc_alarm_irq_enable(struct device *dev, unsigned enabled) -{ - int ret; - - if (enabled) - ret = set_rtc_irq_bit(BIT_RTC_INTERRUPTS_REG_IT_ALARM_M); - else - ret = mask_rtc_irq_bit(BIT_RTC_INTERRUPTS_REG_IT_ALARM_M); - - return ret; -} - -static int twl4030_rtc_update_irq_enable(struct device *dev, unsigned enabled) -{ - int ret; - - if (enabled) - ret = set_rtc_irq_bit(BIT_RTC_INTERRUPTS_REG_IT_TIMER_M); - else - ret = mask_rtc_irq_bit(BIT_RTC_INTERRUPTS_REG_IT_TIMER_M); - - return ret; -} - -/* - * Gets current TWL4030 RTC time and date parameters. - * - * The RTC's time/alarm representation is not what gmtime(3) requires - * Linux to use: - * - * - Months are 1..12 vs Linux 0-11 - * - Years are 0..99 vs Linux 1900..N (we assume 21st century) - */ -static int twl4030_rtc_read_time(struct device *dev, struct rtc_time *tm) -{ - unsigned char rtc_data[ALL_TIME_REGS + 1]; - int ret; - u8 save_control; - - ret = twl4030_rtc_read_u8(&save_control, REG_RTC_CTRL_REG); - if (ret < 0) - return ret; - - save_control |= BIT_RTC_CTRL_REG_GET_TIME_M; - - ret = twl4030_rtc_write_u8(save_control, REG_RTC_CTRL_REG); - if (ret < 0) - return ret; - - ret = twl4030_i2c_read(TWL4030_MODULE_RTC, rtc_data, - REG_SECONDS_REG, ALL_TIME_REGS); - - if (ret < 0) { - dev_err(dev, "rtc_read_time error %d\n", ret); - return ret; - } - - tm->tm_sec = bcd2bin(rtc_data[0]); - tm->tm_min = bcd2bin(rtc_data[1]); - tm->tm_hour = bcd2bin(rtc_data[2]); - tm->tm_mday = bcd2bin(rtc_data[3]); - tm->tm_mon = bcd2bin(rtc_data[4]) - 1; - tm->tm_year = bcd2bin(rtc_data[5]) + 100; - - return ret; -} - -static int twl4030_rtc_set_time(struct device *dev, struct rtc_time *tm) -{ - unsigned char save_control; - unsigned char rtc_data[ALL_TIME_REGS + 1]; - int ret; - - rtc_data[1] = bin2bcd(tm->tm_sec); - rtc_data[2] = bin2bcd(tm->tm_min); - rtc_data[3] = bin2bcd(tm->tm_hour); - rtc_data[4] = bin2bcd(tm->tm_mday); - rtc_data[5] = bin2bcd(tm->tm_mon + 1); - rtc_data[6] = bin2bcd(tm->tm_year - 100); - - /* Stop RTC while updating the TC registers */ - ret = twl4030_rtc_read_u8(&save_control, REG_RTC_CTRL_REG); - if (ret < 0) - goto out; - - save_control &= ~BIT_RTC_CTRL_REG_STOP_RTC_M; - twl4030_rtc_write_u8(save_control, REG_RTC_CTRL_REG); - if (ret < 0) - goto out; - - /* update all the time registers in one shot */ - ret = twl4030_i2c_write(TWL4030_MODULE_RTC, rtc_data, - REG_SECONDS_REG, ALL_TIME_REGS); - if (ret < 0) { - dev_err(dev, "rtc_set_time error %d\n", ret); - goto out; - } - - /* Start back RTC */ - save_control |= BIT_RTC_CTRL_REG_STOP_RTC_M; - ret = twl4030_rtc_write_u8(save_control, REG_RTC_CTRL_REG); - -out: - return ret; -} - -/* - * Gets current TWL4030 RTC alarm time. - */ -static int twl4030_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alm) -{ - unsigned char rtc_data[ALL_TIME_REGS + 1]; - int ret; - - ret = twl4030_i2c_read(TWL4030_MODULE_RTC, rtc_data, - REG_ALARM_SECONDS_REG, ALL_TIME_REGS); - if (ret < 0) { - dev_err(dev, "rtc_read_alarm error %d\n", ret); - return ret; - } - - /* some of these fields may be wildcard/"match all" */ - alm->time.tm_sec = bcd2bin(rtc_data[0]); - alm->time.tm_min = bcd2bin(rtc_data[1]); - alm->time.tm_hour = bcd2bin(rtc_data[2]); - alm->time.tm_mday = bcd2bin(rtc_data[3]); - alm->time.tm_mon = bcd2bin(rtc_data[4]) - 1; - alm->time.tm_year = bcd2bin(rtc_data[5]) + 100; - - /* report cached alarm enable state */ - if (rtc_irq_bits & BIT_RTC_INTERRUPTS_REG_IT_ALARM_M) - alm->enabled = 1; - - return ret; -} - -static int twl4030_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alm) -{ - unsigned char alarm_data[ALL_TIME_REGS + 1]; - int ret; - - ret = twl4030_rtc_alarm_irq_enable(dev, 0); - if (ret) - goto out; - - alarm_data[1] = bin2bcd(alm->time.tm_sec); - alarm_data[2] = bin2bcd(alm->time.tm_min); - alarm_data[3] = bin2bcd(alm->time.tm_hour); - alarm_data[4] = bin2bcd(alm->time.tm_mday); - alarm_data[5] = bin2bcd(alm->time.tm_mon + 1); - alarm_data[6] = bin2bcd(alm->time.tm_year - 100); - - /* update all the alarm registers in one shot */ - ret = twl4030_i2c_write(TWL4030_MODULE_RTC, alarm_data, - REG_ALARM_SECONDS_REG, ALL_TIME_REGS); - if (ret) { - dev_err(dev, "rtc_set_alarm error %d\n", ret); - goto out; - } - - if (alm->enabled) - ret = twl4030_rtc_alarm_irq_enable(dev, 1); -out: - return ret; -} - -static irqreturn_t twl4030_rtc_interrupt(int irq, void *rtc) -{ - unsigned long events = 0; - int ret = IRQ_NONE; - int res; - u8 rd_reg; - -#ifdef CONFIG_LOCKDEP - /* WORKAROUND for lockdep forcing IRQF_DISABLED on us, which - * we don't want and can't tolerate. Although it might be - * friendlier not to borrow this thread context... - */ - local_irq_enable(); -#endif - - res = twl4030_rtc_read_u8(&rd_reg, REG_RTC_STATUS_REG); - if (res) - goto out; - /* - * Figure out source of interrupt: ALARM or TIMER in RTC_STATUS_REG. - * only one (ALARM or RTC) interrupt source may be enabled - * at time, we also could check our results - * by reading RTS_INTERRUPTS_REGISTER[IT_TIMER,IT_ALARM] - */ - if (rd_reg & BIT_RTC_STATUS_REG_ALARM_M) - events |= RTC_IRQF | RTC_AF; - else - events |= RTC_IRQF | RTC_UF; - - res = twl4030_rtc_write_u8(rd_reg | BIT_RTC_STATUS_REG_ALARM_M, - REG_RTC_STATUS_REG); - if (res) - goto out; - - /* Clear on Read enabled. RTC_IT bit of TWL4030_INT_PWR_ISR1 - * needs 2 reads to clear the interrupt. One read is done in - * do_twl4030_pwrirq(). Doing the second read, to clear - * the bit. - * - * FIXME the reason PWR_ISR1 needs an extra read is that - * RTC_IF retriggered until we cleared REG_ALARM_M above. - * But re-reading like this is a bad hack; by doing so we - * risk wrongly clearing status for some other IRQ (losing - * the interrupt). Be smarter about handling RTC_UF ... - */ - res = twl4030_i2c_read_u8(TWL4030_MODULE_INT, - &rd_reg, TWL4030_INT_PWR_ISR1); - if (res) - goto out; - - /* Notify RTC core on event */ - rtc_update_irq(rtc, 1, events); - - ret = IRQ_HANDLED; -out: - return ret; -} - -static struct rtc_class_ops twl4030_rtc_ops = { - .read_time = twl4030_rtc_read_time, - .set_time = twl4030_rtc_set_time, - .read_alarm = twl4030_rtc_read_alarm, - .set_alarm = twl4030_rtc_set_alarm, - .alarm_irq_enable = twl4030_rtc_alarm_irq_enable, - .update_irq_enable = twl4030_rtc_update_irq_enable, -}; - -/*----------------------------------------------------------------------*/ - -static int __devinit twl4030_rtc_probe(struct platform_device *pdev) -{ - struct rtc_device *rtc; - int ret = 0; - int irq = platform_get_irq(pdev, 0); - u8 rd_reg; - - if (irq <= 0) - return -EINVAL; - - rtc = rtc_device_register(pdev->name, - &pdev->dev, &twl4030_rtc_ops, THIS_MODULE); - if (IS_ERR(rtc)) { - ret = PTR_ERR(rtc); - dev_err(&pdev->dev, "can't register RTC device, err %ld\n", - PTR_ERR(rtc)); - goto out0; - - } - - platform_set_drvdata(pdev, rtc); - - ret = twl4030_rtc_read_u8(&rd_reg, REG_RTC_STATUS_REG); - if (ret < 0) - goto out1; - - if (rd_reg & BIT_RTC_STATUS_REG_POWER_UP_M) - dev_warn(&pdev->dev, "Power up reset detected.\n"); - - if (rd_reg & BIT_RTC_STATUS_REG_ALARM_M) - dev_warn(&pdev->dev, "Pending Alarm interrupt detected.\n"); - - /* Clear RTC Power up reset and pending alarm interrupts */ - ret = twl4030_rtc_write_u8(rd_reg, REG_RTC_STATUS_REG); - if (ret < 0) - goto out1; - - ret = request_irq(irq, twl4030_rtc_interrupt, - IRQF_TRIGGER_RISING, - dev_name(&rtc->dev), rtc); - if (ret < 0) { - dev_err(&pdev->dev, "IRQ is not free.\n"); - goto out1; - } - - /* Check RTC module status, Enable if it is off */ - ret = twl4030_rtc_read_u8(&rd_reg, REG_RTC_CTRL_REG); - if (ret < 0) - goto out2; - - if (!(rd_reg & BIT_RTC_CTRL_REG_STOP_RTC_M)) { - dev_info(&pdev->dev, "Enabling TWL4030-RTC.\n"); - rd_reg = BIT_RTC_CTRL_REG_STOP_RTC_M; - ret = twl4030_rtc_write_u8(rd_reg, REG_RTC_CTRL_REG); - if (ret < 0) - goto out2; - } - - /* init cached IRQ enable bits */ - ret = twl4030_rtc_read_u8(&rtc_irq_bits, REG_RTC_INTERRUPTS_REG); - if (ret < 0) - goto out2; - - return ret; - -out2: - free_irq(irq, rtc); -out1: - rtc_device_unregister(rtc); -out0: - return ret; -} - -/* - * Disable all TWL4030 RTC module interrupts. - * Sets status flag to free. - */ -static int __devexit twl4030_rtc_remove(struct platform_device *pdev) -{ - /* leave rtc running, but disable irqs */ - struct rtc_device *rtc = platform_get_drvdata(pdev); - int irq = platform_get_irq(pdev, 0); - - mask_rtc_irq_bit(BIT_RTC_INTERRUPTS_REG_IT_ALARM_M); - mask_rtc_irq_bit(BIT_RTC_INTERRUPTS_REG_IT_TIMER_M); - - free_irq(irq, rtc); - - rtc_device_unregister(rtc); - platform_set_drvdata(pdev, NULL); - return 0; -} - -static void twl4030_rtc_shutdown(struct platform_device *pdev) -{ - /* mask timer interrupts, but leave alarm interrupts on to enable - power-on when alarm is triggered */ - mask_rtc_irq_bit(BIT_RTC_INTERRUPTS_REG_IT_TIMER_M); -} - -#ifdef CONFIG_PM - -static unsigned char irqstat; - -static int twl4030_rtc_suspend(struct platform_device *pdev, pm_message_t state) -{ - irqstat = rtc_irq_bits; - - mask_rtc_irq_bit(BIT_RTC_INTERRUPTS_REG_IT_TIMER_M); - return 0; -} - -static int twl4030_rtc_resume(struct platform_device *pdev) -{ - set_rtc_irq_bit(irqstat); - return 0; -} - -#else -#define twl4030_rtc_suspend NULL -#define twl4030_rtc_resume NULL -#endif - -MODULE_ALIAS("platform:twl4030_rtc"); - -static struct platform_driver twl4030rtc_driver = { - .probe = twl4030_rtc_probe, - .remove = __devexit_p(twl4030_rtc_remove), - .shutdown = twl4030_rtc_shutdown, - .suspend = twl4030_rtc_suspend, - .resume = twl4030_rtc_resume, - .driver = { - .owner = THIS_MODULE, - .name = "twl4030_rtc", - }, -}; - -static int __init twl4030_rtc_init(void) -{ - return platform_driver_register(&twl4030rtc_driver); -} -module_init(twl4030_rtc_init); - -static void __exit twl4030_rtc_exit(void) -{ - platform_driver_unregister(&twl4030rtc_driver); -} -module_exit(twl4030_rtc_exit); - -MODULE_AUTHOR("Texas Instruments, MontaVista Software"); -MODULE_LICENSE("GPL"); diff --git a/drivers/usb/otg/twl4030-usb.c b/drivers/usb/otg/twl4030-usb.c index bd9883f41e63..3acbdb82bcf9 100644 --- a/drivers/usb/otg/twl4030-usb.c +++ b/drivers/usb/otg/twl4030-usb.c @@ -33,7 +33,7 @@ #include #include #include -#include +#include #include #include diff --git a/drivers/video/omap/lcd_2430sdp.c b/drivers/video/omap/lcd_2430sdp.c index 760645d9dbb6..3764a36d9142 100644 --- a/drivers/video/omap/lcd_2430sdp.c +++ b/drivers/video/omap/lcd_2430sdp.c @@ -25,7 +25,7 @@ #include #include #include -#include +#include #include #include diff --git a/drivers/watchdog/twl4030_wdt.c b/drivers/watchdog/twl4030_wdt.c index cb46556f2973..20968b2aadef 100644 --- a/drivers/watchdog/twl4030_wdt.c +++ b/drivers/watchdog/twl4030_wdt.c @@ -26,7 +26,7 @@ #include #include #include -#include +#include #define TWL4030_WATCHDOG_CFG_REG_OFFS 0x3 diff --git a/include/linux/i2c/twl.h b/include/linux/i2c/twl.h new file mode 100644 index 000000000000..a50bcf8a4048 --- /dev/null +++ b/include/linux/i2c/twl.h @@ -0,0 +1,550 @@ +/* + * twl4030.h - header for TWL4030 PM and audio CODEC device + * + * Copyright (C) 2005-2006 Texas Instruments, Inc. + * + * Based on tlv320aic23.c: + * Copyright (c) by Kai Svahn + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#ifndef __TWL4030_H_ +#define __TWL4030_H_ + +#include +#include + +/* + * Using the twl4030 core we address registers using a pair + * { module id, relative register offset } + * which that core then maps to the relevant + * { i2c slave, absolute register address } + * + * The module IDs are meaningful only to the twl4030 core code, + * which uses them as array indices to look up the first register + * address each module uses within a given i2c slave. + */ + +/* Slave 0 (i2c address 0x48) */ +#define TWL4030_MODULE_USB 0x00 + +/* Slave 1 (i2c address 0x49) */ +#define TWL4030_MODULE_AUDIO_VOICE 0x01 +#define TWL4030_MODULE_GPIO 0x02 +#define TWL4030_MODULE_INTBR 0x03 +#define TWL4030_MODULE_PIH 0x04 +#define TWL4030_MODULE_TEST 0x05 + +/* Slave 2 (i2c address 0x4a) */ +#define TWL4030_MODULE_KEYPAD 0x06 +#define TWL4030_MODULE_MADC 0x07 +#define TWL4030_MODULE_INTERRUPTS 0x08 +#define TWL4030_MODULE_LED 0x09 +#define TWL4030_MODULE_MAIN_CHARGE 0x0A +#define TWL4030_MODULE_PRECHARGE 0x0B +#define TWL4030_MODULE_PWM0 0x0C +#define TWL4030_MODULE_PWM1 0x0D +#define TWL4030_MODULE_PWMA 0x0E +#define TWL4030_MODULE_PWMB 0x0F + +#define TWL5031_MODULE_ACCESSORY 0x10 +#define TWL5031_MODULE_INTERRUPTS 0x11 + +/* Slave 3 (i2c address 0x4b) */ +#define TWL4030_MODULE_BACKUP 0x12 +#define TWL4030_MODULE_INT 0x13 +#define TWL4030_MODULE_PM_MASTER 0x14 +#define TWL4030_MODULE_PM_RECEIVER 0x15 +#define TWL4030_MODULE_RTC 0x16 +#define TWL4030_MODULE_SECURED_REG 0x17 + +/* + * Read and write single 8-bit registers + */ +int twl4030_i2c_write_u8(u8 mod_no, u8 val, u8 reg); +int twl4030_i2c_read_u8(u8 mod_no, u8 *val, u8 reg); + +/* + * Read and write several 8-bit registers at once. + * + * IMPORTANT: For twl4030_i2c_write(), allocate num_bytes + 1 + * for the value, and populate your data starting at offset 1. + */ +int twl4030_i2c_write(u8 mod_no, u8 *value, u8 reg, unsigned num_bytes); +int twl4030_i2c_read(u8 mod_no, u8 *value, u8 reg, unsigned num_bytes); + +/*----------------------------------------------------------------------*/ + +/* + * NOTE: at up to 1024 registers, this is a big chip. + * + * Avoid putting register declarations in this file, instead of into + * a driver-private file, unless some of the registers in a block + * need to be shared with other drivers. One example is blocks that + * have Secondary IRQ Handler (SIH) registers. + */ + +#define TWL4030_SIH_CTRL_EXCLEN_MASK BIT(0) +#define TWL4030_SIH_CTRL_PENDDIS_MASK BIT(1) +#define TWL4030_SIH_CTRL_COR_MASK BIT(2) + +/*----------------------------------------------------------------------*/ + +/* + * GPIO Block Register offsets (use TWL4030_MODULE_GPIO) + */ + +#define REG_GPIODATAIN1 0x0 +#define REG_GPIODATAIN2 0x1 +#define REG_GPIODATAIN3 0x2 +#define REG_GPIODATADIR1 0x3 +#define REG_GPIODATADIR2 0x4 +#define REG_GPIODATADIR3 0x5 +#define REG_GPIODATAOUT1 0x6 +#define REG_GPIODATAOUT2 0x7 +#define REG_GPIODATAOUT3 0x8 +#define REG_CLEARGPIODATAOUT1 0x9 +#define REG_CLEARGPIODATAOUT2 0xA +#define REG_CLEARGPIODATAOUT3 0xB +#define REG_SETGPIODATAOUT1 0xC +#define REG_SETGPIODATAOUT2 0xD +#define REG_SETGPIODATAOUT3 0xE +#define REG_GPIO_DEBEN1 0xF +#define REG_GPIO_DEBEN2 0x10 +#define REG_GPIO_DEBEN3 0x11 +#define REG_GPIO_CTRL 0x12 +#define REG_GPIOPUPDCTR1 0x13 +#define REG_GPIOPUPDCTR2 0x14 +#define REG_GPIOPUPDCTR3 0x15 +#define REG_GPIOPUPDCTR4 0x16 +#define REG_GPIOPUPDCTR5 0x17 +#define REG_GPIO_ISR1A 0x19 +#define REG_GPIO_ISR2A 0x1A +#define REG_GPIO_ISR3A 0x1B +#define REG_GPIO_IMR1A 0x1C +#define REG_GPIO_IMR2A 0x1D +#define REG_GPIO_IMR3A 0x1E +#define REG_GPIO_ISR1B 0x1F +#define REG_GPIO_ISR2B 0x20 +#define REG_GPIO_ISR3B 0x21 +#define REG_GPIO_IMR1B 0x22 +#define REG_GPIO_IMR2B 0x23 +#define REG_GPIO_IMR3B 0x24 +#define REG_GPIO_EDR1 0x28 +#define REG_GPIO_EDR2 0x29 +#define REG_GPIO_EDR3 0x2A +#define REG_GPIO_EDR4 0x2B +#define REG_GPIO_EDR5 0x2C +#define REG_GPIO_SIH_CTRL 0x2D + +/* Up to 18 signals are available as GPIOs, when their + * pins are not assigned to another use (such as ULPI/USB). + */ +#define TWL4030_GPIO_MAX 18 + +/*----------------------------------------------------------------------*/ + +/* + * Keypad register offsets (use TWL4030_MODULE_KEYPAD) + * ... SIH/interrupt only + */ + +#define TWL4030_KEYPAD_KEYP_ISR1 0x11 +#define TWL4030_KEYPAD_KEYP_IMR1 0x12 +#define TWL4030_KEYPAD_KEYP_ISR2 0x13 +#define TWL4030_KEYPAD_KEYP_IMR2 0x14 +#define TWL4030_KEYPAD_KEYP_SIR 0x15 /* test register */ +#define TWL4030_KEYPAD_KEYP_EDR 0x16 +#define TWL4030_KEYPAD_KEYP_SIH_CTRL 0x17 + +/*----------------------------------------------------------------------*/ + +/* + * Multichannel ADC register offsets (use TWL4030_MODULE_MADC) + * ... SIH/interrupt only + */ + +#define TWL4030_MADC_ISR1 0x61 +#define TWL4030_MADC_IMR1 0x62 +#define TWL4030_MADC_ISR2 0x63 +#define TWL4030_MADC_IMR2 0x64 +#define TWL4030_MADC_SIR 0x65 /* test register */ +#define TWL4030_MADC_EDR 0x66 +#define TWL4030_MADC_SIH_CTRL 0x67 + +/*----------------------------------------------------------------------*/ + +/* + * Battery charger register offsets (use TWL4030_MODULE_INTERRUPTS) + */ + +#define TWL4030_INTERRUPTS_BCIISR1A 0x0 +#define TWL4030_INTERRUPTS_BCIISR2A 0x1 +#define TWL4030_INTERRUPTS_BCIIMR1A 0x2 +#define TWL4030_INTERRUPTS_BCIIMR2A 0x3 +#define TWL4030_INTERRUPTS_BCIISR1B 0x4 +#define TWL4030_INTERRUPTS_BCIISR2B 0x5 +#define TWL4030_INTERRUPTS_BCIIMR1B 0x6 +#define TWL4030_INTERRUPTS_BCIIMR2B 0x7 +#define TWL4030_INTERRUPTS_BCISIR1 0x8 /* test register */ +#define TWL4030_INTERRUPTS_BCISIR2 0x9 /* test register */ +#define TWL4030_INTERRUPTS_BCIEDR1 0xa +#define TWL4030_INTERRUPTS_BCIEDR2 0xb +#define TWL4030_INTERRUPTS_BCIEDR3 0xc +#define TWL4030_INTERRUPTS_BCISIHCTRL 0xd + +/*----------------------------------------------------------------------*/ + +/* + * Power Interrupt block register offsets (use TWL4030_MODULE_INT) + */ + +#define TWL4030_INT_PWR_ISR1 0x0 +#define TWL4030_INT_PWR_IMR1 0x1 +#define TWL4030_INT_PWR_ISR2 0x2 +#define TWL4030_INT_PWR_IMR2 0x3 +#define TWL4030_INT_PWR_SIR 0x4 /* test register */ +#define TWL4030_INT_PWR_EDR1 0x5 +#define TWL4030_INT_PWR_EDR2 0x6 +#define TWL4030_INT_PWR_SIH_CTRL 0x7 + +/*----------------------------------------------------------------------*/ + +/* + * Accessory Interrupts + */ +#define TWL5031_ACIIMR_LSB 0x05 +#define TWL5031_ACIIMR_MSB 0x06 +#define TWL5031_ACIIDR_LSB 0x07 +#define TWL5031_ACIIDR_MSB 0x08 +#define TWL5031_ACCISR1 0x0F +#define TWL5031_ACCIMR1 0x10 +#define TWL5031_ACCISR2 0x11 +#define TWL5031_ACCIMR2 0x12 +#define TWL5031_ACCSIR 0x13 +#define TWL5031_ACCEDR1 0x14 +#define TWL5031_ACCSIHCTRL 0x15 + +/*----------------------------------------------------------------------*/ + +/* + * Battery Charger Controller + */ + +#define TWL5031_INTERRUPTS_BCIISR1 0x0 +#define TWL5031_INTERRUPTS_BCIIMR1 0x1 +#define TWL5031_INTERRUPTS_BCIISR2 0x2 +#define TWL5031_INTERRUPTS_BCIIMR2 0x3 +#define TWL5031_INTERRUPTS_BCISIR 0x4 +#define TWL5031_INTERRUPTS_BCIEDR1 0x5 +#define TWL5031_INTERRUPTS_BCIEDR2 0x6 +#define TWL5031_INTERRUPTS_BCISIHCTRL 0x7 + +/*----------------------------------------------------------------------*/ + +/* Power bus message definitions */ + +/* The TWL4030/5030 splits its power-management resources (the various + * regulators, clock and reset lines) into 3 processor groups - P1, P2 and + * P3. These groups can then be configured to transition between sleep, wait-on + * and active states by sending messages to the power bus. See Section 5.4.2 + * Power Resources of TWL4030 TRM + */ + +/* Processor groups */ +#define DEV_GRP_NULL 0x0 +#define DEV_GRP_P1 0x1 /* P1: all OMAP devices */ +#define DEV_GRP_P2 0x2 /* P2: all Modem devices */ +#define DEV_GRP_P3 0x4 /* P3: all peripheral devices */ + +/* Resource groups */ +#define RES_GRP_RES 0x0 /* Reserved */ +#define RES_GRP_PP 0x1 /* Power providers */ +#define RES_GRP_RC 0x2 /* Reset and control */ +#define RES_GRP_PP_RC 0x3 +#define RES_GRP_PR 0x4 /* Power references */ +#define RES_GRP_PP_PR 0x5 +#define RES_GRP_RC_PR 0x6 +#define RES_GRP_ALL 0x7 /* All resource groups */ + +#define RES_TYPE2_R0 0x0 + +#define RES_TYPE_ALL 0x7 + +/* Resource states */ +#define RES_STATE_WRST 0xF +#define RES_STATE_ACTIVE 0xE +#define RES_STATE_SLEEP 0x8 +#define RES_STATE_OFF 0x0 + +/* Power resources */ + +/* Power providers */ +#define RES_VAUX1 1 +#define RES_VAUX2 2 +#define RES_VAUX3 3 +#define RES_VAUX4 4 +#define RES_VMMC1 5 +#define RES_VMMC2 6 +#define RES_VPLL1 7 +#define RES_VPLL2 8 +#define RES_VSIM 9 +#define RES_VDAC 10 +#define RES_VINTANA1 11 +#define RES_VINTANA2 12 +#define RES_VINTDIG 13 +#define RES_VIO 14 +#define RES_VDD1 15 +#define RES_VDD2 16 +#define RES_VUSB_1V5 17 +#define RES_VUSB_1V8 18 +#define RES_VUSB_3V1 19 +#define RES_VUSBCP 20 +#define RES_REGEN 21 +/* Reset and control */ +#define RES_NRES_PWRON 22 +#define RES_CLKEN 23 +#define RES_SYSEN 24 +#define RES_HFCLKOUT 25 +#define RES_32KCLKOUT 26 +#define RES_RESET 27 +/* Power Reference */ +#define RES_Main_Ref 28 + +#define TOTAL_RESOURCES 28 +/* + * Power Bus Message Format ... these can be sent individually by Linux, + * but are usually part of downloaded scripts that are run when various + * power events are triggered. + * + * Broadcast Message (16 Bits): + * DEV_GRP[15:13] MT[12] RES_GRP[11:9] RES_TYPE2[8:7] RES_TYPE[6:4] + * RES_STATE[3:0] + * + * Singular Message (16 Bits): + * DEV_GRP[15:13] MT[12] RES_ID[11:4] RES_STATE[3:0] + */ + +#define MSG_BROADCAST(devgrp, grp, type, type2, state) \ + ( (devgrp) << 13 | 1 << 12 | (grp) << 9 | (type2) << 7 \ + | (type) << 4 | (state)) + +#define MSG_SINGULAR(devgrp, id, state) \ + ((devgrp) << 13 | 0 << 12 | (id) << 4 | (state)) + +/*----------------------------------------------------------------------*/ + +struct twl4030_clock_init_data { + bool ck32k_lowpwr_enable; +}; + +struct twl4030_bci_platform_data { + int *battery_tmp_tbl; + unsigned int tblsize; +}; + +/* TWL4030_GPIO_MAX (18) GPIOs, with interrupts */ +struct twl4030_gpio_platform_data { + int gpio_base; + unsigned irq_base, irq_end; + + /* package the two LED signals as output-only GPIOs? */ + bool use_leds; + + /* gpio-n should control VMMC(n+1) if BIT(n) in mmc_cd is set */ + u8 mmc_cd; + + /* if BIT(N) is set, or VMMC(n+1) is linked, debounce GPIO-N */ + u32 debounce; + + /* For gpio-N, bit (1 << N) in "pullups" is set if that pullup + * should be enabled. Else, if that bit is set in "pulldowns", + * that pulldown is enabled. Don't waste power by letting any + * digital inputs float... + */ + u32 pullups; + u32 pulldowns; + + int (*setup)(struct device *dev, + unsigned gpio, unsigned ngpio); + int (*teardown)(struct device *dev, + unsigned gpio, unsigned ngpio); +}; + +struct twl4030_madc_platform_data { + int irq_line; +}; + +/* Boards have uniqe mappings of {row, col} --> keycode. + * Column and row are 8 bits each, but range only from 0..7. + * a PERSISTENT_KEY is "always on" and never reported. + */ +#define PERSISTENT_KEY(r, c) KEY((r), (c), KEY_RESERVED) + +struct twl4030_keypad_data { + const struct matrix_keymap_data *keymap_data; + unsigned rows; + unsigned cols; + bool rep; +}; + +enum twl4030_usb_mode { + T2_USB_MODE_ULPI = 1, + T2_USB_MODE_CEA2011_3PIN = 2, +}; + +struct twl4030_usb_data { + enum twl4030_usb_mode usb_mode; +}; + +struct twl4030_ins { + u16 pmb_message; + u8 delay; +}; + +struct twl4030_script { + struct twl4030_ins *script; + unsigned size; + u8 flags; +#define TWL4030_WRST_SCRIPT (1<<0) +#define TWL4030_WAKEUP12_SCRIPT (1<<1) +#define TWL4030_WAKEUP3_SCRIPT (1<<2) +#define TWL4030_SLEEP_SCRIPT (1<<3) +}; + +struct twl4030_resconfig { + u8 resource; + u8 devgroup; /* Processor group that Power resource belongs to */ + u8 type; /* Power resource addressed, 6 / broadcast message */ + u8 type2; /* Power resource addressed, 3 / broadcast message */ + u8 remap_off; /* off state remapping */ + u8 remap_sleep; /* sleep state remapping */ +}; + +struct twl4030_power_data { + struct twl4030_script **scripts; + unsigned num; + struct twl4030_resconfig *resource_config; +#define TWL4030_RESCONFIG_UNDEF ((u8)-1) +}; + +extern void twl4030_power_init(struct twl4030_power_data *triton2_scripts); + +struct twl4030_codec_audio_data { + unsigned int audio_mclk; + unsigned int ramp_delay_value; + unsigned int hs_extmute:1; + void (*set_hs_extmute)(int mute); +}; + +struct twl4030_codec_vibra_data { + unsigned int audio_mclk; + unsigned int coexist; +}; + +struct twl4030_codec_data { + unsigned int audio_mclk; + struct twl4030_codec_audio_data *audio; + struct twl4030_codec_vibra_data *vibra; +}; + +struct twl4030_platform_data { + unsigned irq_base, irq_end; + struct twl4030_clock_init_data *clock; + struct twl4030_bci_platform_data *bci; + struct twl4030_gpio_platform_data *gpio; + struct twl4030_madc_platform_data *madc; + struct twl4030_keypad_data *keypad; + struct twl4030_usb_data *usb; + struct twl4030_power_data *power; + struct twl4030_codec_data *codec; + + /* LDO regulators */ + struct regulator_init_data *vdac; + struct regulator_init_data *vpll1; + struct regulator_init_data *vpll2; + struct regulator_init_data *vmmc1; + struct regulator_init_data *vmmc2; + struct regulator_init_data *vsim; + struct regulator_init_data *vaux1; + struct regulator_init_data *vaux2; + struct regulator_init_data *vaux3; + struct regulator_init_data *vaux4; + struct regulator_init_data *vio; + struct regulator_init_data *vdd1; + struct regulator_init_data *vdd2; + struct regulator_init_data *vintana1; + struct regulator_init_data *vintana2; + struct regulator_init_data *vintdig; +}; + +/*----------------------------------------------------------------------*/ + +int twl4030_sih_setup(int module); + +/* Offsets to Power Registers */ +#define TWL4030_VDAC_DEV_GRP 0x3B +#define TWL4030_VDAC_DEDICATED 0x3E +#define TWL4030_VAUX1_DEV_GRP 0x17 +#define TWL4030_VAUX1_DEDICATED 0x1A +#define TWL4030_VAUX2_DEV_GRP 0x1B +#define TWL4030_VAUX2_DEDICATED 0x1E +#define TWL4030_VAUX3_DEV_GRP 0x1F +#define TWL4030_VAUX3_DEDICATED 0x22 + +#if defined(CONFIG_TWL4030_BCI_BATTERY) || \ + defined(CONFIG_TWL4030_BCI_BATTERY_MODULE) + extern int twl4030charger_usb_en(int enable); +#else + static inline int twl4030charger_usb_en(int enable) { return 0; } +#endif + +/*----------------------------------------------------------------------*/ + +/* Linux-specific regulator identifiers ... for now, we only support + * the LDOs, and leave the three buck converters alone. VDD1 and VDD2 + * need to tie into hardware based voltage scaling (cpufreq etc), while + * VIO is generally fixed. + */ + +/* EXTERNAL dc-to-dc buck converters */ +#define TWL4030_REG_VDD1 0 +#define TWL4030_REG_VDD2 1 +#define TWL4030_REG_VIO 2 + +/* EXTERNAL LDOs */ +#define TWL4030_REG_VDAC 3 +#define TWL4030_REG_VPLL1 4 +#define TWL4030_REG_VPLL2 5 /* not on all chips */ +#define TWL4030_REG_VMMC1 6 +#define TWL4030_REG_VMMC2 7 /* not on all chips */ +#define TWL4030_REG_VSIM 8 /* not on all chips */ +#define TWL4030_REG_VAUX1 9 /* not on all chips */ +#define TWL4030_REG_VAUX2_4030 10 /* (twl4030-specific) */ +#define TWL4030_REG_VAUX2 11 /* (twl5030 and newer) */ +#define TWL4030_REG_VAUX3 12 /* not on all chips */ +#define TWL4030_REG_VAUX4 13 /* not on all chips */ + +/* INTERNAL LDOs */ +#define TWL4030_REG_VINTANA1 14 +#define TWL4030_REG_VINTANA2 15 +#define TWL4030_REG_VINTDIG 16 +#define TWL4030_REG_VUSB1V5 17 +#define TWL4030_REG_VUSB1V8 18 +#define TWL4030_REG_VUSB3V1 19 + +#endif /* End of __TWL4030_H */ diff --git a/include/linux/i2c/twl4030.h b/include/linux/i2c/twl4030.h deleted file mode 100644 index a50bcf8a4048..000000000000 --- a/include/linux/i2c/twl4030.h +++ /dev/null @@ -1,550 +0,0 @@ -/* - * twl4030.h - header for TWL4030 PM and audio CODEC device - * - * Copyright (C) 2005-2006 Texas Instruments, Inc. - * - * Based on tlv320aic23.c: - * Copyright (c) by Kai Svahn - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - */ - -#ifndef __TWL4030_H_ -#define __TWL4030_H_ - -#include -#include - -/* - * Using the twl4030 core we address registers using a pair - * { module id, relative register offset } - * which that core then maps to the relevant - * { i2c slave, absolute register address } - * - * The module IDs are meaningful only to the twl4030 core code, - * which uses them as array indices to look up the first register - * address each module uses within a given i2c slave. - */ - -/* Slave 0 (i2c address 0x48) */ -#define TWL4030_MODULE_USB 0x00 - -/* Slave 1 (i2c address 0x49) */ -#define TWL4030_MODULE_AUDIO_VOICE 0x01 -#define TWL4030_MODULE_GPIO 0x02 -#define TWL4030_MODULE_INTBR 0x03 -#define TWL4030_MODULE_PIH 0x04 -#define TWL4030_MODULE_TEST 0x05 - -/* Slave 2 (i2c address 0x4a) */ -#define TWL4030_MODULE_KEYPAD 0x06 -#define TWL4030_MODULE_MADC 0x07 -#define TWL4030_MODULE_INTERRUPTS 0x08 -#define TWL4030_MODULE_LED 0x09 -#define TWL4030_MODULE_MAIN_CHARGE 0x0A -#define TWL4030_MODULE_PRECHARGE 0x0B -#define TWL4030_MODULE_PWM0 0x0C -#define TWL4030_MODULE_PWM1 0x0D -#define TWL4030_MODULE_PWMA 0x0E -#define TWL4030_MODULE_PWMB 0x0F - -#define TWL5031_MODULE_ACCESSORY 0x10 -#define TWL5031_MODULE_INTERRUPTS 0x11 - -/* Slave 3 (i2c address 0x4b) */ -#define TWL4030_MODULE_BACKUP 0x12 -#define TWL4030_MODULE_INT 0x13 -#define TWL4030_MODULE_PM_MASTER 0x14 -#define TWL4030_MODULE_PM_RECEIVER 0x15 -#define TWL4030_MODULE_RTC 0x16 -#define TWL4030_MODULE_SECURED_REG 0x17 - -/* - * Read and write single 8-bit registers - */ -int twl4030_i2c_write_u8(u8 mod_no, u8 val, u8 reg); -int twl4030_i2c_read_u8(u8 mod_no, u8 *val, u8 reg); - -/* - * Read and write several 8-bit registers at once. - * - * IMPORTANT: For twl4030_i2c_write(), allocate num_bytes + 1 - * for the value, and populate your data starting at offset 1. - */ -int twl4030_i2c_write(u8 mod_no, u8 *value, u8 reg, unsigned num_bytes); -int twl4030_i2c_read(u8 mod_no, u8 *value, u8 reg, unsigned num_bytes); - -/*----------------------------------------------------------------------*/ - -/* - * NOTE: at up to 1024 registers, this is a big chip. - * - * Avoid putting register declarations in this file, instead of into - * a driver-private file, unless some of the registers in a block - * need to be shared with other drivers. One example is blocks that - * have Secondary IRQ Handler (SIH) registers. - */ - -#define TWL4030_SIH_CTRL_EXCLEN_MASK BIT(0) -#define TWL4030_SIH_CTRL_PENDDIS_MASK BIT(1) -#define TWL4030_SIH_CTRL_COR_MASK BIT(2) - -/*----------------------------------------------------------------------*/ - -/* - * GPIO Block Register offsets (use TWL4030_MODULE_GPIO) - */ - -#define REG_GPIODATAIN1 0x0 -#define REG_GPIODATAIN2 0x1 -#define REG_GPIODATAIN3 0x2 -#define REG_GPIODATADIR1 0x3 -#define REG_GPIODATADIR2 0x4 -#define REG_GPIODATADIR3 0x5 -#define REG_GPIODATAOUT1 0x6 -#define REG_GPIODATAOUT2 0x7 -#define REG_GPIODATAOUT3 0x8 -#define REG_CLEARGPIODATAOUT1 0x9 -#define REG_CLEARGPIODATAOUT2 0xA -#define REG_CLEARGPIODATAOUT3 0xB -#define REG_SETGPIODATAOUT1 0xC -#define REG_SETGPIODATAOUT2 0xD -#define REG_SETGPIODATAOUT3 0xE -#define REG_GPIO_DEBEN1 0xF -#define REG_GPIO_DEBEN2 0x10 -#define REG_GPIO_DEBEN3 0x11 -#define REG_GPIO_CTRL 0x12 -#define REG_GPIOPUPDCTR1 0x13 -#define REG_GPIOPUPDCTR2 0x14 -#define REG_GPIOPUPDCTR3 0x15 -#define REG_GPIOPUPDCTR4 0x16 -#define REG_GPIOPUPDCTR5 0x17 -#define REG_GPIO_ISR1A 0x19 -#define REG_GPIO_ISR2A 0x1A -#define REG_GPIO_ISR3A 0x1B -#define REG_GPIO_IMR1A 0x1C -#define REG_GPIO_IMR2A 0x1D -#define REG_GPIO_IMR3A 0x1E -#define REG_GPIO_ISR1B 0x1F -#define REG_GPIO_ISR2B 0x20 -#define REG_GPIO_ISR3B 0x21 -#define REG_GPIO_IMR1B 0x22 -#define REG_GPIO_IMR2B 0x23 -#define REG_GPIO_IMR3B 0x24 -#define REG_GPIO_EDR1 0x28 -#define REG_GPIO_EDR2 0x29 -#define REG_GPIO_EDR3 0x2A -#define REG_GPIO_EDR4 0x2B -#define REG_GPIO_EDR5 0x2C -#define REG_GPIO_SIH_CTRL 0x2D - -/* Up to 18 signals are available as GPIOs, when their - * pins are not assigned to another use (such as ULPI/USB). - */ -#define TWL4030_GPIO_MAX 18 - -/*----------------------------------------------------------------------*/ - -/* - * Keypad register offsets (use TWL4030_MODULE_KEYPAD) - * ... SIH/interrupt only - */ - -#define TWL4030_KEYPAD_KEYP_ISR1 0x11 -#define TWL4030_KEYPAD_KEYP_IMR1 0x12 -#define TWL4030_KEYPAD_KEYP_ISR2 0x13 -#define TWL4030_KEYPAD_KEYP_IMR2 0x14 -#define TWL4030_KEYPAD_KEYP_SIR 0x15 /* test register */ -#define TWL4030_KEYPAD_KEYP_EDR 0x16 -#define TWL4030_KEYPAD_KEYP_SIH_CTRL 0x17 - -/*----------------------------------------------------------------------*/ - -/* - * Multichannel ADC register offsets (use TWL4030_MODULE_MADC) - * ... SIH/interrupt only - */ - -#define TWL4030_MADC_ISR1 0x61 -#define TWL4030_MADC_IMR1 0x62 -#define TWL4030_MADC_ISR2 0x63 -#define TWL4030_MADC_IMR2 0x64 -#define TWL4030_MADC_SIR 0x65 /* test register */ -#define TWL4030_MADC_EDR 0x66 -#define TWL4030_MADC_SIH_CTRL 0x67 - -/*----------------------------------------------------------------------*/ - -/* - * Battery charger register offsets (use TWL4030_MODULE_INTERRUPTS) - */ - -#define TWL4030_INTERRUPTS_BCIISR1A 0x0 -#define TWL4030_INTERRUPTS_BCIISR2A 0x1 -#define TWL4030_INTERRUPTS_BCIIMR1A 0x2 -#define TWL4030_INTERRUPTS_BCIIMR2A 0x3 -#define TWL4030_INTERRUPTS_BCIISR1B 0x4 -#define TWL4030_INTERRUPTS_BCIISR2B 0x5 -#define TWL4030_INTERRUPTS_BCIIMR1B 0x6 -#define TWL4030_INTERRUPTS_BCIIMR2B 0x7 -#define TWL4030_INTERRUPTS_BCISIR1 0x8 /* test register */ -#define TWL4030_INTERRUPTS_BCISIR2 0x9 /* test register */ -#define TWL4030_INTERRUPTS_BCIEDR1 0xa -#define TWL4030_INTERRUPTS_BCIEDR2 0xb -#define TWL4030_INTERRUPTS_BCIEDR3 0xc -#define TWL4030_INTERRUPTS_BCISIHCTRL 0xd - -/*----------------------------------------------------------------------*/ - -/* - * Power Interrupt block register offsets (use TWL4030_MODULE_INT) - */ - -#define TWL4030_INT_PWR_ISR1 0x0 -#define TWL4030_INT_PWR_IMR1 0x1 -#define TWL4030_INT_PWR_ISR2 0x2 -#define TWL4030_INT_PWR_IMR2 0x3 -#define TWL4030_INT_PWR_SIR 0x4 /* test register */ -#define TWL4030_INT_PWR_EDR1 0x5 -#define TWL4030_INT_PWR_EDR2 0x6 -#define TWL4030_INT_PWR_SIH_CTRL 0x7 - -/*----------------------------------------------------------------------*/ - -/* - * Accessory Interrupts - */ -#define TWL5031_ACIIMR_LSB 0x05 -#define TWL5031_ACIIMR_MSB 0x06 -#define TWL5031_ACIIDR_LSB 0x07 -#define TWL5031_ACIIDR_MSB 0x08 -#define TWL5031_ACCISR1 0x0F -#define TWL5031_ACCIMR1 0x10 -#define TWL5031_ACCISR2 0x11 -#define TWL5031_ACCIMR2 0x12 -#define TWL5031_ACCSIR 0x13 -#define TWL5031_ACCEDR1 0x14 -#define TWL5031_ACCSIHCTRL 0x15 - -/*----------------------------------------------------------------------*/ - -/* - * Battery Charger Controller - */ - -#define TWL5031_INTERRUPTS_BCIISR1 0x0 -#define TWL5031_INTERRUPTS_BCIIMR1 0x1 -#define TWL5031_INTERRUPTS_BCIISR2 0x2 -#define TWL5031_INTERRUPTS_BCIIMR2 0x3 -#define TWL5031_INTERRUPTS_BCISIR 0x4 -#define TWL5031_INTERRUPTS_BCIEDR1 0x5 -#define TWL5031_INTERRUPTS_BCIEDR2 0x6 -#define TWL5031_INTERRUPTS_BCISIHCTRL 0x7 - -/*----------------------------------------------------------------------*/ - -/* Power bus message definitions */ - -/* The TWL4030/5030 splits its power-management resources (the various - * regulators, clock and reset lines) into 3 processor groups - P1, P2 and - * P3. These groups can then be configured to transition between sleep, wait-on - * and active states by sending messages to the power bus. See Section 5.4.2 - * Power Resources of TWL4030 TRM - */ - -/* Processor groups */ -#define DEV_GRP_NULL 0x0 -#define DEV_GRP_P1 0x1 /* P1: all OMAP devices */ -#define DEV_GRP_P2 0x2 /* P2: all Modem devices */ -#define DEV_GRP_P3 0x4 /* P3: all peripheral devices */ - -/* Resource groups */ -#define RES_GRP_RES 0x0 /* Reserved */ -#define RES_GRP_PP 0x1 /* Power providers */ -#define RES_GRP_RC 0x2 /* Reset and control */ -#define RES_GRP_PP_RC 0x3 -#define RES_GRP_PR 0x4 /* Power references */ -#define RES_GRP_PP_PR 0x5 -#define RES_GRP_RC_PR 0x6 -#define RES_GRP_ALL 0x7 /* All resource groups */ - -#define RES_TYPE2_R0 0x0 - -#define RES_TYPE_ALL 0x7 - -/* Resource states */ -#define RES_STATE_WRST 0xF -#define RES_STATE_ACTIVE 0xE -#define RES_STATE_SLEEP 0x8 -#define RES_STATE_OFF 0x0 - -/* Power resources */ - -/* Power providers */ -#define RES_VAUX1 1 -#define RES_VAUX2 2 -#define RES_VAUX3 3 -#define RES_VAUX4 4 -#define RES_VMMC1 5 -#define RES_VMMC2 6 -#define RES_VPLL1 7 -#define RES_VPLL2 8 -#define RES_VSIM 9 -#define RES_VDAC 10 -#define RES_VINTANA1 11 -#define RES_VINTANA2 12 -#define RES_VINTDIG 13 -#define RES_VIO 14 -#define RES_VDD1 15 -#define RES_VDD2 16 -#define RES_VUSB_1V5 17 -#define RES_VUSB_1V8 18 -#define RES_VUSB_3V1 19 -#define RES_VUSBCP 20 -#define RES_REGEN 21 -/* Reset and control */ -#define RES_NRES_PWRON 22 -#define RES_CLKEN 23 -#define RES_SYSEN 24 -#define RES_HFCLKOUT 25 -#define RES_32KCLKOUT 26 -#define RES_RESET 27 -/* Power Reference */ -#define RES_Main_Ref 28 - -#define TOTAL_RESOURCES 28 -/* - * Power Bus Message Format ... these can be sent individually by Linux, - * but are usually part of downloaded scripts that are run when various - * power events are triggered. - * - * Broadcast Message (16 Bits): - * DEV_GRP[15:13] MT[12] RES_GRP[11:9] RES_TYPE2[8:7] RES_TYPE[6:4] - * RES_STATE[3:0] - * - * Singular Message (16 Bits): - * DEV_GRP[15:13] MT[12] RES_ID[11:4] RES_STATE[3:0] - */ - -#define MSG_BROADCAST(devgrp, grp, type, type2, state) \ - ( (devgrp) << 13 | 1 << 12 | (grp) << 9 | (type2) << 7 \ - | (type) << 4 | (state)) - -#define MSG_SINGULAR(devgrp, id, state) \ - ((devgrp) << 13 | 0 << 12 | (id) << 4 | (state)) - -/*----------------------------------------------------------------------*/ - -struct twl4030_clock_init_data { - bool ck32k_lowpwr_enable; -}; - -struct twl4030_bci_platform_data { - int *battery_tmp_tbl; - unsigned int tblsize; -}; - -/* TWL4030_GPIO_MAX (18) GPIOs, with interrupts */ -struct twl4030_gpio_platform_data { - int gpio_base; - unsigned irq_base, irq_end; - - /* package the two LED signals as output-only GPIOs? */ - bool use_leds; - - /* gpio-n should control VMMC(n+1) if BIT(n) in mmc_cd is set */ - u8 mmc_cd; - - /* if BIT(N) is set, or VMMC(n+1) is linked, debounce GPIO-N */ - u32 debounce; - - /* For gpio-N, bit (1 << N) in "pullups" is set if that pullup - * should be enabled. Else, if that bit is set in "pulldowns", - * that pulldown is enabled. Don't waste power by letting any - * digital inputs float... - */ - u32 pullups; - u32 pulldowns; - - int (*setup)(struct device *dev, - unsigned gpio, unsigned ngpio); - int (*teardown)(struct device *dev, - unsigned gpio, unsigned ngpio); -}; - -struct twl4030_madc_platform_data { - int irq_line; -}; - -/* Boards have uniqe mappings of {row, col} --> keycode. - * Column and row are 8 bits each, but range only from 0..7. - * a PERSISTENT_KEY is "always on" and never reported. - */ -#define PERSISTENT_KEY(r, c) KEY((r), (c), KEY_RESERVED) - -struct twl4030_keypad_data { - const struct matrix_keymap_data *keymap_data; - unsigned rows; - unsigned cols; - bool rep; -}; - -enum twl4030_usb_mode { - T2_USB_MODE_ULPI = 1, - T2_USB_MODE_CEA2011_3PIN = 2, -}; - -struct twl4030_usb_data { - enum twl4030_usb_mode usb_mode; -}; - -struct twl4030_ins { - u16 pmb_message; - u8 delay; -}; - -struct twl4030_script { - struct twl4030_ins *script; - unsigned size; - u8 flags; -#define TWL4030_WRST_SCRIPT (1<<0) -#define TWL4030_WAKEUP12_SCRIPT (1<<1) -#define TWL4030_WAKEUP3_SCRIPT (1<<2) -#define TWL4030_SLEEP_SCRIPT (1<<3) -}; - -struct twl4030_resconfig { - u8 resource; - u8 devgroup; /* Processor group that Power resource belongs to */ - u8 type; /* Power resource addressed, 6 / broadcast message */ - u8 type2; /* Power resource addressed, 3 / broadcast message */ - u8 remap_off; /* off state remapping */ - u8 remap_sleep; /* sleep state remapping */ -}; - -struct twl4030_power_data { - struct twl4030_script **scripts; - unsigned num; - struct twl4030_resconfig *resource_config; -#define TWL4030_RESCONFIG_UNDEF ((u8)-1) -}; - -extern void twl4030_power_init(struct twl4030_power_data *triton2_scripts); - -struct twl4030_codec_audio_data { - unsigned int audio_mclk; - unsigned int ramp_delay_value; - unsigned int hs_extmute:1; - void (*set_hs_extmute)(int mute); -}; - -struct twl4030_codec_vibra_data { - unsigned int audio_mclk; - unsigned int coexist; -}; - -struct twl4030_codec_data { - unsigned int audio_mclk; - struct twl4030_codec_audio_data *audio; - struct twl4030_codec_vibra_data *vibra; -}; - -struct twl4030_platform_data { - unsigned irq_base, irq_end; - struct twl4030_clock_init_data *clock; - struct twl4030_bci_platform_data *bci; - struct twl4030_gpio_platform_data *gpio; - struct twl4030_madc_platform_data *madc; - struct twl4030_keypad_data *keypad; - struct twl4030_usb_data *usb; - struct twl4030_power_data *power; - struct twl4030_codec_data *codec; - - /* LDO regulators */ - struct regulator_init_data *vdac; - struct regulator_init_data *vpll1; - struct regulator_init_data *vpll2; - struct regulator_init_data *vmmc1; - struct regulator_init_data *vmmc2; - struct regulator_init_data *vsim; - struct regulator_init_data *vaux1; - struct regulator_init_data *vaux2; - struct regulator_init_data *vaux3; - struct regulator_init_data *vaux4; - struct regulator_init_data *vio; - struct regulator_init_data *vdd1; - struct regulator_init_data *vdd2; - struct regulator_init_data *vintana1; - struct regulator_init_data *vintana2; - struct regulator_init_data *vintdig; -}; - -/*----------------------------------------------------------------------*/ - -int twl4030_sih_setup(int module); - -/* Offsets to Power Registers */ -#define TWL4030_VDAC_DEV_GRP 0x3B -#define TWL4030_VDAC_DEDICATED 0x3E -#define TWL4030_VAUX1_DEV_GRP 0x17 -#define TWL4030_VAUX1_DEDICATED 0x1A -#define TWL4030_VAUX2_DEV_GRP 0x1B -#define TWL4030_VAUX2_DEDICATED 0x1E -#define TWL4030_VAUX3_DEV_GRP 0x1F -#define TWL4030_VAUX3_DEDICATED 0x22 - -#if defined(CONFIG_TWL4030_BCI_BATTERY) || \ - defined(CONFIG_TWL4030_BCI_BATTERY_MODULE) - extern int twl4030charger_usb_en(int enable); -#else - static inline int twl4030charger_usb_en(int enable) { return 0; } -#endif - -/*----------------------------------------------------------------------*/ - -/* Linux-specific regulator identifiers ... for now, we only support - * the LDOs, and leave the three buck converters alone. VDD1 and VDD2 - * need to tie into hardware based voltage scaling (cpufreq etc), while - * VIO is generally fixed. - */ - -/* EXTERNAL dc-to-dc buck converters */ -#define TWL4030_REG_VDD1 0 -#define TWL4030_REG_VDD2 1 -#define TWL4030_REG_VIO 2 - -/* EXTERNAL LDOs */ -#define TWL4030_REG_VDAC 3 -#define TWL4030_REG_VPLL1 4 -#define TWL4030_REG_VPLL2 5 /* not on all chips */ -#define TWL4030_REG_VMMC1 6 -#define TWL4030_REG_VMMC2 7 /* not on all chips */ -#define TWL4030_REG_VSIM 8 /* not on all chips */ -#define TWL4030_REG_VAUX1 9 /* not on all chips */ -#define TWL4030_REG_VAUX2_4030 10 /* (twl4030-specific) */ -#define TWL4030_REG_VAUX2 11 /* (twl5030 and newer) */ -#define TWL4030_REG_VAUX3 12 /* not on all chips */ -#define TWL4030_REG_VAUX4 13 /* not on all chips */ - -/* INTERNAL LDOs */ -#define TWL4030_REG_VINTANA1 14 -#define TWL4030_REG_VINTANA2 15 -#define TWL4030_REG_VINTDIG 16 -#define TWL4030_REG_VUSB1V5 17 -#define TWL4030_REG_VUSB1V8 18 -#define TWL4030_REG_VUSB3V1 19 - -#endif /* End of __TWL4030_H */ diff --git a/sound/soc/codecs/twl4030.c b/sound/soc/codecs/twl4030.c index 5f1681f6ca76..c3a6ceb542cb 100644 --- a/sound/soc/codecs/twl4030.c +++ b/sound/soc/codecs/twl4030.c @@ -26,7 +26,7 @@ #include #include #include -#include +#include #include #include #include -- cgit v1.2.3 From fc7b92fca4e546184557f1c53f84ad57c66b7695 Mon Sep 17 00:00:00 2001 From: Balaji T K Date: Sun, 13 Dec 2009 21:23:33 +0100 Subject: mfd: Rename all twl4030_i2c* This patch renames function names like twl4030_i2c_write_u8, twl4030_i2c_read_u8 to twl_i2c_write_u8, twl_i2c_read_u8 and also common variable in twl-core.c Signed-off-by: Rajendra Nayak Signed-off-by: Balaji T K Signed-off-by: Santosh Shilimkar Acked-by: Kevin Hilman Signed-off-by: Samuel Ortiz --- drivers/gpio/twl4030-gpio.c | 18 ++--- drivers/input/keyboard/twl4030_keypad.c | 4 +- drivers/input/misc/twl4030-pwrbutton.c | 2 +- drivers/mfd/twl-core.c | 136 +++++++++++++++++--------------- drivers/mfd/twl4030-irq.c | 18 ++--- drivers/mfd/twl4030-power.c | 68 ++++++++-------- drivers/regulator/twl-regulator.c | 8 +- drivers/rtc/rtc-twl.c | 14 ++-- drivers/usb/otg/twl4030-usb.c | 36 ++++----- drivers/video/omap/lcd_2430sdp.c | 2 +- drivers/watchdog/twl4030_wdt.c | 2 +- include/linux/i2c/twl.h | 31 ++++++-- sound/soc/codecs/twl4030.c | 8 +- 13 files changed, 187 insertions(+), 160 deletions(-) (limited to 'sound') diff --git a/drivers/gpio/twl4030-gpio.c b/drivers/gpio/twl4030-gpio.c index a320d7bfe67c..7fe881e2bdfb 100644 --- a/drivers/gpio/twl4030-gpio.c +++ b/drivers/gpio/twl4030-gpio.c @@ -80,7 +80,7 @@ static unsigned int gpio_usage_count; */ static inline int gpio_twl4030_write(u8 address, u8 data) { - return twl4030_i2c_write_u8(TWL4030_MODULE_GPIO, data, address); + return twl_i2c_write_u8(TWL4030_MODULE_GPIO, data, address); } /*----------------------------------------------------------------------*/ @@ -117,7 +117,7 @@ static inline int gpio_twl4030_read(u8 address) u8 data; int ret = 0; - ret = twl4030_i2c_read_u8(TWL4030_MODULE_GPIO, &data, address); + ret = twl_i2c_read_u8(TWL4030_MODULE_GPIO, &data, address); return (ret < 0) ? ret : data; } @@ -142,7 +142,7 @@ static void twl4030_led_set_value(int led, int value) cached_leden &= ~mask; else cached_leden |= mask; - status = twl4030_i2c_write_u8(TWL4030_MODULE_LED, cached_leden, + status = twl_i2c_write_u8(TWL4030_MODULE_LED, cached_leden, TWL4030_LED_LEDEN); mutex_unlock(&gpio_lock); } @@ -223,23 +223,23 @@ static int twl_request(struct gpio_chip *chip, unsigned offset) } /* initialize PWM to always-drive */ - status = twl4030_i2c_write_u8(module, 0x7f, + status = twl_i2c_write_u8(module, 0x7f, TWL4030_PWMx_PWMxOFF); if (status < 0) goto done; - status = twl4030_i2c_write_u8(module, 0x7f, + status = twl_i2c_write_u8(module, 0x7f, TWL4030_PWMx_PWMxON); if (status < 0) goto done; /* init LED to not-driven (high) */ module = TWL4030_MODULE_LED; - status = twl4030_i2c_read_u8(module, &cached_leden, + status = twl_i2c_read_u8(module, &cached_leden, TWL4030_LED_LEDEN); if (status < 0) goto done; cached_leden &= ~ledclr_mask; - status = twl4030_i2c_write_u8(module, cached_leden, + status = twl_i2c_write_u8(module, cached_leden, TWL4030_LED_LEDEN); if (status < 0) goto done; @@ -370,7 +370,7 @@ static int __devinit gpio_twl4030_pulls(u32 ups, u32 downs) message[i] = bit_mask; } - return twl4030_i2c_write(TWL4030_MODULE_GPIO, message, + return twl_i2c_write(TWL4030_MODULE_GPIO, message, REG_GPIOPUPDCTR1, 5); } @@ -387,7 +387,7 @@ static int __devinit gpio_twl4030_debounce(u32 debounce, u8 mmc_cd) debounce >>= 8; message[3] = (debounce & 0x03); - return twl4030_i2c_write(TWL4030_MODULE_GPIO, message, + return twl_i2c_write(TWL4030_MODULE_GPIO, message, REG_GPIO_DEBEN1, 3); } diff --git a/drivers/input/keyboard/twl4030_keypad.c b/drivers/input/keyboard/twl4030_keypad.c index 1d1536a2fe46..eeaa7acb9cfc 100644 --- a/drivers/input/keyboard/twl4030_keypad.c +++ b/drivers/input/keyboard/twl4030_keypad.c @@ -133,7 +133,7 @@ struct twl4030_keypad { static int twl4030_kpread(struct twl4030_keypad *kp, u8 *data, u32 reg, u8 num_bytes) { - int ret = twl4030_i2c_read(TWL4030_MODULE_KEYPAD, data, reg, num_bytes); + int ret = twl_i2c_read(TWL4030_MODULE_KEYPAD, data, reg, num_bytes); if (ret < 0) dev_warn(kp->dbg_dev, @@ -145,7 +145,7 @@ static int twl4030_kpread(struct twl4030_keypad *kp, static int twl4030_kpwrite_u8(struct twl4030_keypad *kp, u8 data, u32 reg) { - int ret = twl4030_i2c_write_u8(TWL4030_MODULE_KEYPAD, data, reg); + int ret = twl_i2c_write_u8(TWL4030_MODULE_KEYPAD, data, reg); if (ret < 0) dev_warn(kp->dbg_dev, diff --git a/drivers/input/misc/twl4030-pwrbutton.c b/drivers/input/misc/twl4030-pwrbutton.c index a73b889fff79..bdde5c889035 100644 --- a/drivers/input/misc/twl4030-pwrbutton.c +++ b/drivers/input/misc/twl4030-pwrbutton.c @@ -49,7 +49,7 @@ static irqreturn_t powerbutton_irq(int irq, void *_pwr) local_irq_enable(); #endif - err = twl4030_i2c_read_u8(TWL4030_MODULE_PM_MASTER, &value, + err = twl_i2c_read_u8(TWL4030_MODULE_PM_MASTER, &value, STS_HW_CONDITIONS); if (!err) { input_report_key(pwr, KEY_POWER, value & PWR_PWRON_IRQ); diff --git a/drivers/mfd/twl-core.c b/drivers/mfd/twl-core.c index 44714f5cf495..9021f44de2a4 100644 --- a/drivers/mfd/twl-core.c +++ b/drivers/mfd/twl-core.c @@ -1,5 +1,6 @@ /* - * twl4030_core.c - driver for TWL4030/TPS659x0 PM and audio CODEC devices + * twl_core.c - driver for TWL4030/TWL5030/TWL60X0/TPS659x0 PM + * and audio CODEC devices * * Copyright (C) 2005-2006 Texas Instruments, Inc. * @@ -55,7 +56,7 @@ * (and associated registers). */ -#define DRIVER_NAME "twl4030" +#define DRIVER_NAME "twl" #if defined(CONFIG_TWL4030_BCI_BATTERY) || \ defined(CONFIG_TWL4030_BCI_BATTERY_MODULE) @@ -125,7 +126,7 @@ /* Last - for index max*/ #define TWL4030_MODULE_LAST TWL4030_MODULE_SECURED_REG -#define TWL4030_NUM_SLAVES 4 +#define TWL_NUM_SLAVES 4 #if defined(CONFIG_INPUT_TWL4030_PWRBUTTON) \ || defined(CONFIG_INPUT_TWL4030_PWBUTTON_MODULE) @@ -134,6 +135,13 @@ #define twl_has_pwrbutton() false #endif +#define SUB_CHIP_ID0 0 +#define SUB_CHIP_ID1 1 +#define SUB_CHIP_ID2 2 +#define SUB_CHIP_ID3 3 + +#define TWL_MODULE_LAST TWL4030_MODULE_LAST + /* Base Address defns for twl4030_map[] */ /* subchip/slave 0 - USB ID */ @@ -201,7 +209,7 @@ static bool inuse; /* Structure for each TWL4030 Slave */ -struct twl4030_client { +struct twl_client { struct i2c_client *client; u8 address; @@ -212,16 +220,16 @@ struct twl4030_client { struct mutex xfer_lock; }; -static struct twl4030_client twl4030_modules[TWL4030_NUM_SLAVES]; +static struct twl_client twl_modules[TWL_NUM_SLAVES]; /* mapping the module id to slave id and base address */ -struct twl4030mapping { +struct twl_mapping { unsigned char sid; /* Slave ID */ unsigned char base; /* base address */ }; -static struct twl4030mapping twl4030_map[TWL4030_MODULE_LAST + 1] = { +static struct twl_mapping twl4030_map[TWL4030_MODULE_LAST + 1] = { /* * NOTE: don't change this table without updating the * defines for TWL4030_MODULE_* @@ -262,7 +270,7 @@ static struct twl4030mapping twl4030_map[TWL4030_MODULE_LAST + 1] = { /* Exported Functions */ /** - * twl4030_i2c_write - Writes a n bit register in TWL4030 + * twl_i2c_write - Writes a n bit register in TWL4030/TWL5030/TWL60X0 * @mod_no: module number * @value: an array of num_bytes+1 containing data to write * @reg: register address (just offset will do) @@ -273,19 +281,19 @@ static struct twl4030mapping twl4030_map[TWL4030_MODULE_LAST + 1] = { * * Returns the result of operation - 0 is success */ -int twl4030_i2c_write(u8 mod_no, u8 *value, u8 reg, unsigned num_bytes) +int twl_i2c_write(u8 mod_no, u8 *value, u8 reg, unsigned num_bytes) { int ret; int sid; - struct twl4030_client *twl; + struct twl_client *twl; struct i2c_msg *msg; - if (unlikely(mod_no > TWL4030_MODULE_LAST)) { + if (unlikely(mod_no > TWL_MODULE_LAST)) { pr_err("%s: invalid module number %d\n", DRIVER_NAME, mod_no); return -EPERM; } sid = twl4030_map[mod_no].sid; - twl = &twl4030_modules[sid]; + twl = &twl_modules[sid]; if (unlikely(!inuse)) { pr_err("%s: client %d is not initialized\n", DRIVER_NAME, sid); @@ -318,10 +326,10 @@ int twl4030_i2c_write(u8 mod_no, u8 *value, u8 reg, unsigned num_bytes) return 0; } } -EXPORT_SYMBOL(twl4030_i2c_write); +EXPORT_SYMBOL(twl_i2c_write); /** - * twl4030_i2c_read - Reads a n bit register in TWL4030 + * twl_i2c_read - Reads a n bit register in TWL4030/TWL5030/TWL60X0 * @mod_no: module number * @value: an array of num_bytes containing data to be read * @reg: register address (just offset will do) @@ -329,20 +337,20 @@ EXPORT_SYMBOL(twl4030_i2c_write); * * Returns result of operation - num_bytes is success else failure. */ -int twl4030_i2c_read(u8 mod_no, u8 *value, u8 reg, unsigned num_bytes) +int twl_i2c_read(u8 mod_no, u8 *value, u8 reg, unsigned num_bytes) { int ret; u8 val; int sid; - struct twl4030_client *twl; + struct twl_client *twl; struct i2c_msg *msg; - if (unlikely(mod_no > TWL4030_MODULE_LAST)) { + if (unlikely(mod_no > TWL_MODULE_LAST)) { pr_err("%s: invalid module number %d\n", DRIVER_NAME, mod_no); return -EPERM; } sid = twl4030_map[mod_no].sid; - twl = &twl4030_modules[sid]; + twl = &twl_modules[sid]; if (unlikely(!inuse)) { pr_err("%s: client %d is not initialized\n", DRIVER_NAME, sid); @@ -377,40 +385,40 @@ int twl4030_i2c_read(u8 mod_no, u8 *value, u8 reg, unsigned num_bytes) return 0; } } -EXPORT_SYMBOL(twl4030_i2c_read); +EXPORT_SYMBOL(twl_i2c_read); /** - * twl4030_i2c_write_u8 - Writes a 8 bit register in TWL4030 + * twl_i2c_write_u8 - Writes a 8 bit register in TWL4030/TWL5030/TWL60X0 * @mod_no: module number * @value: the value to be written 8 bit * @reg: register address (just offset will do) * * Returns result of operation - 0 is success */ -int twl4030_i2c_write_u8(u8 mod_no, u8 value, u8 reg) +int twl_i2c_write_u8(u8 mod_no, u8 value, u8 reg) { /* 2 bytes offset 1 contains the data offset 0 is used by i2c_write */ u8 temp_buffer[2] = { 0 }; /* offset 1 contains the data */ temp_buffer[1] = value; - return twl4030_i2c_write(mod_no, temp_buffer, reg, 1); + return twl_i2c_write(mod_no, temp_buffer, reg, 1); } -EXPORT_SYMBOL(twl4030_i2c_write_u8); +EXPORT_SYMBOL(twl_i2c_write_u8); /** - * twl4030_i2c_read_u8 - Reads a 8 bit register from TWL4030 + * twl_i2c_read_u8 - Reads a 8 bit register from TWL4030/TWL5030/TWL60X0 * @mod_no: module number * @value: the value read 8 bit * @reg: register address (just offset will do) * * Returns result of operation - 0 is success */ -int twl4030_i2c_read_u8(u8 mod_no, u8 *value, u8 reg) +int twl_i2c_read_u8(u8 mod_no, u8 *value, u8 reg) { - return twl4030_i2c_read(mod_no, value, reg, 1); + return twl_i2c_read(mod_no, value, reg, 1); } -EXPORT_SYMBOL(twl4030_i2c_read_u8); +EXPORT_SYMBOL(twl_i2c_read_u8); /*----------------------------------------------------------------------*/ @@ -420,7 +428,7 @@ add_numbered_child(unsigned chip, const char *name, int num, bool can_wakeup, int irq0, int irq1) { struct platform_device *pdev; - struct twl4030_client *twl = &twl4030_modules[chip]; + struct twl_client *twl = &twl_modules[chip]; int status; pdev = platform_device_alloc(name, num); @@ -515,23 +523,24 @@ add_children(struct twl4030_platform_data *pdata, unsigned long features) pdata->bci, sizeof(*pdata->bci), false, /* irq0 = CHG_PRES, irq1 = BCI */ - pdata->irq_base + 8 + 1, pdata->irq_base + 2); + pdata->irq_base + BCI_PRES_INTR_OFFSET, + pdata->irq_base + BCI_INTR_OFFSET); if (IS_ERR(child)) return PTR_ERR(child); } if (twl_has_gpio() && pdata->gpio) { - child = add_child(1, "twl4030_gpio", + child = add_child(SUB_CHIP_ID1, "twl4030_gpio", pdata->gpio, sizeof(*pdata->gpio), - false, pdata->irq_base + 0, 0); + false, pdata->irq_base + GPIO_INTR_OFFSET, 0); if (IS_ERR(child)) return PTR_ERR(child); } if (twl_has_keypad() && pdata->keypad) { - child = add_child(2, "twl4030_keypad", + child = add_child(SUB_CHIP_ID2, "twl4030_keypad", pdata->keypad, sizeof(*pdata->keypad), - true, pdata->irq_base + 1, 0); + true, pdata->irq_base + KEYPAD_INTR_OFFSET, 0); if (IS_ERR(child)) return PTR_ERR(child); } @@ -539,7 +548,7 @@ add_children(struct twl4030_platform_data *pdata, unsigned long features) if (twl_has_madc() && pdata->madc) { child = add_child(2, "twl4030_madc", pdata->madc, sizeof(*pdata->madc), - true, pdata->irq_base + 3, 0); + true, pdata->irq_base + MADC_INTR_OFFSET, 0); if (IS_ERR(child)) return PTR_ERR(child); } @@ -554,7 +563,7 @@ add_children(struct twl4030_platform_data *pdata, unsigned long features) */ child = add_child(3, "twl4030_rtc", NULL, 0, - true, pdata->irq_base + 8 + 3, 0); + true, pdata->irq_base + RTC_INTR_OFFSET, 0); if (IS_ERR(child)) return PTR_ERR(child); } @@ -604,7 +613,8 @@ add_children(struct twl4030_platform_data *pdata, unsigned long features) pdata->usb, sizeof(*pdata->usb), true, /* irq0 = USB_PRES, irq1 = USB */ - pdata->irq_base + 8 + 2, pdata->irq_base + 4); + pdata->irq_base + USB_PRES_INTR_OFFSET, + pdata->irq_base + USB_INTR_OFFSET); if (IS_ERR(child)) return PTR_ERR(child); @@ -724,7 +734,7 @@ static inline int __init protect_pm_master(void) { int e = 0; - e = twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, KEY_LOCK, + e = twl_i2c_write_u8(TWL_MODULE_PM_MASTER, KEY_LOCK, R_PROTECT_KEY); return e; } @@ -733,9 +743,9 @@ static inline int __init unprotect_pm_master(void) { int e = 0; - e |= twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, KEY_UNLOCK1, + e |= twl_i2c_write_u8(TWL_MODULE_PM_MASTER, KEY_UNLOCK1, R_PROTECT_KEY); - e |= twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, KEY_UNLOCK2, + e |= twl_i2c_write_u8(TWL_MODULE_PM_MASTER, KEY_UNLOCK2, R_PROTECT_KEY); return e; } @@ -755,7 +765,7 @@ static void clocks_init(struct device *dev, osc = clk_get(dev, "osc_sys_ck"); if (IS_ERR(osc)) { - printk(KERN_WARNING "Skipping twl4030 internal clock init and " + printk(KERN_WARNING "Skipping twl internal clock init and " "using bootloader value (unknown osc rate)\n"); return; } @@ -769,7 +779,7 @@ static void clocks_init(struct device *dev, */ osc = ERR_PTR(-EIO); - printk(KERN_WARNING "Skipping twl4030 internal clock init and " + printk(KERN_WARNING "Skipping twl internal clock init and " "using bootloader value (unknown osc rate)\n"); return; @@ -793,7 +803,7 @@ static void clocks_init(struct device *dev, e |= unprotect_pm_master(); /* effect->MADC+USB ck en */ - e |= twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, ctrl, R_CFG_BOOT); + e |= twl_i2c_write_u8(TWL_MODULE_PM_MASTER, ctrl, R_CFG_BOOT); e |= protect_pm_master(); if (e < 0) @@ -806,7 +816,7 @@ int twl_init_irq(int irq_num, unsigned irq_base, unsigned irq_end); int twl_exit_irq(void); int twl_init_chip_irq(const char *chip); -static int twl4030_remove(struct i2c_client *client) +static int twl_remove(struct i2c_client *client) { unsigned i; int status; @@ -815,12 +825,12 @@ static int twl4030_remove(struct i2c_client *client) if (status < 0) return status; - for (i = 0; i < TWL4030_NUM_SLAVES; i++) { - struct twl4030_client *twl = &twl4030_modules[i]; + for (i = 0; i < TWL_NUM_SLAVES; i++) { + struct twl_client *twl = &twl_modules[i]; if (twl->client && twl->client != client) i2c_unregister_device(twl->client); - twl4030_modules[i].client = NULL; + twl_modules[i].client = NULL; } inuse = false; return 0; @@ -828,7 +838,7 @@ static int twl4030_remove(struct i2c_client *client) /* NOTE: this driver only handles a single twl4030/tps659x0 chip */ static int __init -twl4030_probe(struct i2c_client *client, const struct i2c_device_id *id) +twl_probe(struct i2c_client *client, const struct i2c_device_id *id) { int status; unsigned i; @@ -849,8 +859,8 @@ twl4030_probe(struct i2c_client *client, const struct i2c_device_id *id) return -EBUSY; } - for (i = 0; i < TWL4030_NUM_SLAVES; i++) { - struct twl4030_client *twl = &twl4030_modules[i]; + for (i = 0; i < TWL_NUM_SLAVES; i++) { + struct twl_client *twl = &twl_modules[i]; twl->address = client->addr + i; if (i == 0) @@ -889,11 +899,11 @@ twl4030_probe(struct i2c_client *client, const struct i2c_device_id *id) status = add_children(pdata, id->driver_data); fail: if (status < 0) - twl4030_remove(client); + twl_remove(client); return status; } -static const struct i2c_device_id twl4030_ids[] = { +static const struct i2c_device_id twl_ids[] = { { "twl4030", TWL4030_VAUX2 }, /* "Triton 2" */ { "twl5030", 0 }, /* T2 updated */ { "twl5031", TWL5031 }, /* TWL5030 updated */ @@ -902,28 +912,28 @@ static const struct i2c_device_id twl4030_ids[] = { { "tps65920", TPS_SUBSET }, /* fewer LDOs; no codec or charger */ { /* end of list */ }, }; -MODULE_DEVICE_TABLE(i2c, twl4030_ids); +MODULE_DEVICE_TABLE(i2c, twl_ids); /* One Client Driver , 4 Clients */ -static struct i2c_driver twl4030_driver = { +static struct i2c_driver twl_driver = { .driver.name = DRIVER_NAME, - .id_table = twl4030_ids, - .probe = twl4030_probe, - .remove = twl4030_remove, + .id_table = twl_ids, + .probe = twl_probe, + .remove = twl_remove, }; -static int __init twl4030_init(void) +static int __init twl_init(void) { - return i2c_add_driver(&twl4030_driver); + return i2c_add_driver(&twl_driver); } -subsys_initcall(twl4030_init); +subsys_initcall(twl_init); -static void __exit twl4030_exit(void) +static void __exit twl_exit(void) { - i2c_del_driver(&twl4030_driver); + i2c_del_driver(&twl_driver); } -module_exit(twl4030_exit); +module_exit(twl_exit); MODULE_AUTHOR("Texas Instruments, Inc."); -MODULE_DESCRIPTION("I2C Core interface for TWL4030"); +MODULE_DESCRIPTION("I2C Core interface for TWL"); MODULE_LICENSE("GPL"); diff --git a/drivers/mfd/twl4030-irq.c b/drivers/mfd/twl4030-irq.c index c4528db549c6..5a62cf916987 100644 --- a/drivers/mfd/twl4030-irq.c +++ b/drivers/mfd/twl4030-irq.c @@ -296,7 +296,7 @@ static int twl4030_irq_thread(void *data) /* Wait for IRQ, then read PIH irq status (also blocking) */ wait_for_completion_interruptible(&irq_event); - ret = twl4030_i2c_read_u8(TWL4030_MODULE_PIH, &pih_isr, + ret = twl_i2c_read_u8(TWL4030_MODULE_PIH, &pih_isr, REG_PIH_ISR_P1); if (ret) { pr_warning("twl4030: I2C error %d reading PIH ISR\n", @@ -396,7 +396,7 @@ static int twl4030_init_sih_modules(unsigned line) if (sih->irq_lines <= line) continue; - status = twl4030_i2c_write(sih->module, buf, + status = twl_i2c_write(sih->module, buf, sih->mask[line].imr_offset, sih->bytes_ixr); if (status < 0) pr_err("twl4030: err %d initializing %s %s\n", @@ -410,7 +410,7 @@ static int twl4030_init_sih_modules(unsigned line) * And for PWR_INT it's not documented... */ if (sih->set_cor) { - status = twl4030_i2c_write_u8(sih->module, + status = twl_i2c_write_u8(sih->module, TWL4030_SIH_CTRL_COR_MASK, sih->control_offset); if (status < 0) @@ -438,14 +438,14 @@ static int twl4030_init_sih_modules(unsigned line) * uncommon with PWR_INT.PWRON. */ for (j = 0; j < 2; j++) { - status = twl4030_i2c_read(sih->module, rxbuf, + status = twl_i2c_read(sih->module, rxbuf, sih->mask[line].isr_offset, sih->bytes_ixr); if (status < 0) pr_err("twl4030: err %d initializing %s %s\n", status, sih->name, "ISR"); if (!sih->set_cor) - status = twl4030_i2c_write(sih->module, buf, + status = twl_i2c_write(sih->module, buf, sih->mask[line].isr_offset, sih->bytes_ixr); /* else COR=1 means read sufficed. @@ -514,7 +514,7 @@ static void twl4030_sih_do_mask(struct work_struct *work) return; /* write the whole mask ... simpler than subsetting it */ - status = twl4030_i2c_write(sih->module, imr.bytes, + status = twl_i2c_write(sih->module, imr.bytes, sih->mask[irq_line].imr_offset, sih->bytes_ixr); if (status) pr_err("twl4030: %s, %s --> %d\n", __func__, @@ -545,7 +545,7 @@ static void twl4030_sih_do_edge(struct work_struct *work) * any processor on the other IRQ line, EDR registers are * shared. */ - status = twl4030_i2c_read(sih->module, bytes + 1, + status = twl_i2c_read(sih->module, bytes + 1, sih->edr_offset, sih->bytes_edr); if (status) { pr_err("twl4030: %s, %s --> %d\n", __func__, @@ -579,7 +579,7 @@ static void twl4030_sih_do_edge(struct work_struct *work) } /* Write */ - status = twl4030_i2c_write(sih->module, bytes, + status = twl_i2c_write(sih->module, bytes, sih->edr_offset, sih->bytes_edr); if (status) pr_err("twl4030: %s, %s --> %d\n", __func__, @@ -664,7 +664,7 @@ static inline int sih_read_isr(const struct sih *sih) /* FIXME need retry-on-error ... */ isr.word = 0; - status = twl4030_i2c_read(sih->module, isr.bytes, + status = twl_i2c_read(sih->module, isr.bytes, sih->mask[irq_line].isr_offset, sih->bytes_ixr); return (status < 0) ? status : le32_to_cpu(isr.word); diff --git a/drivers/mfd/twl4030-power.c b/drivers/mfd/twl4030-power.c index 424b255d6f92..0815292fdafc 100644 --- a/drivers/mfd/twl4030-power.c +++ b/drivers/mfd/twl4030-power.c @@ -131,11 +131,11 @@ static int __init twl4030_write_script_byte(u8 address, u8 byte) { int err; - err = twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, address, + err = twl_i2c_write_u8(TWL4030_MODULE_PM_MASTER, address, R_MEMORY_ADDRESS); if (err) goto out; - err = twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, byte, + err = twl_i2c_write_u8(TWL4030_MODULE_PM_MASTER, byte, R_MEMORY_DATA); out: return err; @@ -192,18 +192,18 @@ static int __init twl4030_config_wakeup3_sequence(u8 address) u8 data; /* Set SLEEP to ACTIVE SEQ address for P3 */ - err = twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, address, + err = twl_i2c_write_u8(TWL4030_MODULE_PM_MASTER, address, R_SEQ_ADD_S2A3); if (err) goto out; /* P3 LVL_WAKEUP should be on LEVEL */ - err = twl4030_i2c_read_u8(TWL4030_MODULE_PM_MASTER, &data, + err = twl_i2c_read_u8(TWL4030_MODULE_PM_MASTER, &data, R_P3_SW_EVENTS); if (err) goto out; data |= LVL_WAKEUP; - err = twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, data, + err = twl_i2c_write_u8(TWL4030_MODULE_PM_MASTER, data, R_P3_SW_EVENTS); out: if (err) @@ -217,42 +217,42 @@ static int __init twl4030_config_wakeup12_sequence(u8 address) u8 data; /* Set SLEEP to ACTIVE SEQ address for P1 and P2 */ - err = twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, address, + err = twl_i2c_write_u8(TWL4030_MODULE_PM_MASTER, address, R_SEQ_ADD_S2A12); if (err) goto out; /* P1/P2 LVL_WAKEUP should be on LEVEL */ - err = twl4030_i2c_read_u8(TWL4030_MODULE_PM_MASTER, &data, + err = twl_i2c_read_u8(TWL4030_MODULE_PM_MASTER, &data, R_P1_SW_EVENTS); if (err) goto out; data |= LVL_WAKEUP; - err = twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, data, + err = twl_i2c_write_u8(TWL4030_MODULE_PM_MASTER, data, R_P1_SW_EVENTS); if (err) goto out; - err = twl4030_i2c_read_u8(TWL4030_MODULE_PM_MASTER, &data, + err = twl_i2c_read_u8(TWL4030_MODULE_PM_MASTER, &data, R_P2_SW_EVENTS); if (err) goto out; data |= LVL_WAKEUP; - err = twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, data, + err = twl_i2c_write_u8(TWL4030_MODULE_PM_MASTER, data, R_P2_SW_EVENTS); if (err) goto out; if (machine_is_omap_3430sdp() || machine_is_omap_ldp()) { /* Disabling AC charger effect on sleep-active transitions */ - err = twl4030_i2c_read_u8(TWL4030_MODULE_PM_MASTER, &data, + err = twl_i2c_read_u8(TWL4030_MODULE_PM_MASTER, &data, R_CFG_P1_TRANSITION); if (err) goto out; data &= ~(1<<1); - err = twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, data , + err = twl_i2c_write_u8(TWL4030_MODULE_PM_MASTER, data , R_CFG_P1_TRANSITION); if (err) goto out; @@ -270,7 +270,7 @@ static int __init twl4030_config_sleep_sequence(u8 address) int err; /* Set ACTIVE to SLEEP SEQ address in T2 memory*/ - err = twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, address, + err = twl_i2c_write_u8(TWL4030_MODULE_PM_MASTER, address, R_SEQ_ADD_A2S); if (err) @@ -285,41 +285,41 @@ static int __init twl4030_config_warmreset_sequence(u8 address) u8 rd_data; /* Set WARM RESET SEQ address for P1 */ - err = twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, address, + err = twl_i2c_write_u8(TWL4030_MODULE_PM_MASTER, address, R_SEQ_ADD_WARM); if (err) goto out; /* P1/P2/P3 enable WARMRESET */ - err = twl4030_i2c_read_u8(TWL4030_MODULE_PM_MASTER, &rd_data, + err = twl_i2c_read_u8(TWL4030_MODULE_PM_MASTER, &rd_data, R_P1_SW_EVENTS); if (err) goto out; rd_data |= ENABLE_WARMRESET; - err = twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, rd_data, + err = twl_i2c_write_u8(TWL4030_MODULE_PM_MASTER, rd_data, R_P1_SW_EVENTS); if (err) goto out; - err = twl4030_i2c_read_u8(TWL4030_MODULE_PM_MASTER, &rd_data, + err = twl_i2c_read_u8(TWL4030_MODULE_PM_MASTER, &rd_data, R_P2_SW_EVENTS); if (err) goto out; rd_data |= ENABLE_WARMRESET; - err = twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, rd_data, + err = twl_i2c_write_u8(TWL4030_MODULE_PM_MASTER, rd_data, R_P2_SW_EVENTS); if (err) goto out; - err = twl4030_i2c_read_u8(TWL4030_MODULE_PM_MASTER, &rd_data, + err = twl_i2c_read_u8(TWL4030_MODULE_PM_MASTER, &rd_data, R_P3_SW_EVENTS); if (err) goto out; rd_data |= ENABLE_WARMRESET; - err = twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, rd_data, + err = twl_i2c_write_u8(TWL4030_MODULE_PM_MASTER, rd_data, R_P3_SW_EVENTS); out: if (err) @@ -344,8 +344,8 @@ static int __init twl4030_configure_resource(struct twl4030_resconfig *rconfig) rconfig_addr = res_config_addrs[rconfig->resource]; /* Set resource group */ - err = twl4030_i2c_read_u8(TWL4030_MODULE_PM_RECEIVER, &grp, - rconfig_addr + DEV_GRP_OFFSET); + err = twl_i2c_read_u8(TWL4030_MODULE_PM_RECEIVER, &grp, + rconfig_addr + DEV_GRP_OFFSET); if (err) { pr_err("TWL4030 Resource %d group could not be read\n", rconfig->resource); @@ -355,8 +355,8 @@ static int __init twl4030_configure_resource(struct twl4030_resconfig *rconfig) if (rconfig->devgroup != TWL4030_RESCONFIG_UNDEF) { grp &= ~DEV_GRP_MASK; grp |= rconfig->devgroup << DEV_GRP_SHIFT; - err = twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, - grp, rconfig_addr + DEV_GRP_OFFSET); + err = twl_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, + grp, rconfig_addr + DEV_GRP_OFFSET); if (err < 0) { pr_err("TWL4030 failed to program devgroup\n"); return err; @@ -364,7 +364,7 @@ static int __init twl4030_configure_resource(struct twl4030_resconfig *rconfig) } /* Set resource types */ - err = twl4030_i2c_read_u8(TWL4030_MODULE_PM_RECEIVER, &type, + err = twl_i2c_read_u8(TWL4030_MODULE_PM_RECEIVER, &type, rconfig_addr + TYPE_OFFSET); if (err < 0) { pr_err("TWL4030 Resource %d type could not be read\n", @@ -382,7 +382,7 @@ static int __init twl4030_configure_resource(struct twl4030_resconfig *rconfig) type |= rconfig->type2 << TYPE2_SHIFT; } - err = twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, + err = twl_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, type, rconfig_addr + TYPE_OFFSET); if (err < 0) { pr_err("TWL4030 failed to program resource type\n"); @@ -390,8 +390,8 @@ static int __init twl4030_configure_resource(struct twl4030_resconfig *rconfig) } /* Set remap states */ - err = twl4030_i2c_read_u8(TWL4030_MODULE_PM_RECEIVER, &remap, - rconfig_addr + REMAP_OFFSET); + err = twl_i2c_read_u8(TWL4030_MODULE_PM_RECEIVER, &remap, + rconfig_addr + REMAP_OFFSET); if (err < 0) { pr_err("TWL4030 Resource %d remap could not be read\n", rconfig->resource); @@ -408,9 +408,9 @@ static int __init twl4030_configure_resource(struct twl4030_resconfig *rconfig) remap |= rconfig->remap_off << SLEEP_STATE_SHIFT; } - err = twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, - remap, - rconfig_addr + REMAP_OFFSET); + err = twl_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, + remap, + rconfig_addr + REMAP_OFFSET); if (err < 0) { pr_err("TWL4030 failed to program remap\n"); return err; @@ -468,12 +468,12 @@ void __init twl4030_power_init(struct twl4030_power_data *twl4030_scripts) struct twl4030_resconfig *resconfig; u8 address = twl4030_start_script_address; - err = twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, R_KEY_1, + err = twl_i2c_write_u8(TWL4030_MODULE_PM_MASTER, R_KEY_1, R_PROTECT_KEY); if (err) goto unlock; - err = twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, R_KEY_2, + err = twl_i2c_write_u8(TWL4030_MODULE_PM_MASTER, R_KEY_2, R_PROTECT_KEY); if (err) goto unlock; @@ -496,7 +496,7 @@ void __init twl4030_power_init(struct twl4030_power_data *twl4030_scripts) } } - err = twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, 0, R_PROTECT_KEY); + err = twl_i2c_write_u8(TWL4030_MODULE_PM_MASTER, 0, R_PROTECT_KEY); if (err) pr_err("TWL4030 Unable to relock registers\n"); return; diff --git a/drivers/regulator/twl-regulator.c b/drivers/regulator/twl-regulator.c index c8a6e583d773..8cc46e99ccca 100644 --- a/drivers/regulator/twl-regulator.c +++ b/drivers/regulator/twl-regulator.c @@ -64,7 +64,7 @@ twl4030reg_read(struct twlreg_info *info, unsigned offset) u8 value; int status; - status = twl4030_i2c_read_u8(TWL4030_MODULE_PM_RECEIVER, + status = twl_i2c_read_u8(TWL4030_MODULE_PM_RECEIVER, &value, info->base + offset); return (status < 0) ? status : value; } @@ -72,7 +72,7 @@ twl4030reg_read(struct twlreg_info *info, unsigned offset) static inline int twl4030reg_write(struct twlreg_info *info, unsigned offset, u8 value) { - return twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, + return twl_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, value, info->base + offset); } @@ -171,12 +171,12 @@ static int twl4030reg_set_mode(struct regulator_dev *rdev, unsigned mode) if (!(status & (P3_GRP | P2_GRP | P1_GRP))) return -EACCES; - status = twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, + status = twl_i2c_write_u8(TWL4030_MODULE_PM_MASTER, message >> 8, 0x15 /* PB_WORD_MSB */ ); if (status >= 0) return status; - return twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, + return twl_i2c_write_u8(TWL4030_MODULE_PM_MASTER, message, 0x16 /* PB_WORD_LSB */ ); } diff --git a/drivers/rtc/rtc-twl.c b/drivers/rtc/rtc-twl.c index 93565be12fae..6119712cc8de 100644 --- a/drivers/rtc/rtc-twl.c +++ b/drivers/rtc/rtc-twl.c @@ -92,7 +92,7 @@ static int twl4030_rtc_read_u8(u8 *data, u8 reg) { int ret; - ret = twl4030_i2c_read_u8(TWL4030_MODULE_RTC, data, reg); + ret = twl_i2c_read_u8(TWL4030_MODULE_RTC, data, reg); if (ret < 0) pr_err("twl4030_rtc: Could not read TWL4030" "register %X - error %d\n", reg, ret); @@ -106,7 +106,7 @@ static int twl4030_rtc_write_u8(u8 data, u8 reg) { int ret; - ret = twl4030_i2c_write_u8(TWL4030_MODULE_RTC, data, reg); + ret = twl_i2c_write_u8(TWL4030_MODULE_RTC, data, reg); if (ret < 0) pr_err("twl4030_rtc: Could not write TWL4030" "register %X - error %d\n", reg, ret); @@ -201,7 +201,7 @@ static int twl4030_rtc_read_time(struct device *dev, struct rtc_time *tm) if (ret < 0) return ret; - ret = twl4030_i2c_read(TWL4030_MODULE_RTC, rtc_data, + ret = twl_i2c_read(TWL4030_MODULE_RTC, rtc_data, REG_SECONDS_REG, ALL_TIME_REGS); if (ret < 0) { @@ -243,7 +243,7 @@ static int twl4030_rtc_set_time(struct device *dev, struct rtc_time *tm) goto out; /* update all the time registers in one shot */ - ret = twl4030_i2c_write(TWL4030_MODULE_RTC, rtc_data, + ret = twl_i2c_write(TWL4030_MODULE_RTC, rtc_data, REG_SECONDS_REG, ALL_TIME_REGS); if (ret < 0) { dev_err(dev, "rtc_set_time error %d\n", ret); @@ -266,7 +266,7 @@ static int twl4030_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alm) unsigned char rtc_data[ALL_TIME_REGS + 1]; int ret; - ret = twl4030_i2c_read(TWL4030_MODULE_RTC, rtc_data, + ret = twl_i2c_read(TWL4030_MODULE_RTC, rtc_data, REG_ALARM_SECONDS_REG, ALL_TIME_REGS); if (ret < 0) { dev_err(dev, "rtc_read_alarm error %d\n", ret); @@ -305,7 +305,7 @@ static int twl4030_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alm) alarm_data[6] = bin2bcd(alm->time.tm_year - 100); /* update all the alarm registers in one shot */ - ret = twl4030_i2c_write(TWL4030_MODULE_RTC, alarm_data, + ret = twl_i2c_write(TWL4030_MODULE_RTC, alarm_data, REG_ALARM_SECONDS_REG, ALL_TIME_REGS); if (ret) { dev_err(dev, "rtc_set_alarm error %d\n", ret); @@ -363,7 +363,7 @@ static irqreturn_t twl4030_rtc_interrupt(int irq, void *rtc) * risk wrongly clearing status for some other IRQ (losing * the interrupt). Be smarter about handling RTC_UF ... */ - res = twl4030_i2c_read_u8(TWL4030_MODULE_INT, + res = twl_i2c_read_u8(TWL4030_MODULE_INT, &rd_reg, TWL4030_INT_PWR_ISR1); if (res) goto out; diff --git a/drivers/usb/otg/twl4030-usb.c b/drivers/usb/otg/twl4030-usb.c index 3acbdb82bcf9..2be9f2fa41f9 100644 --- a/drivers/usb/otg/twl4030-usb.c +++ b/drivers/usb/otg/twl4030-usb.c @@ -276,16 +276,16 @@ static int twl4030_i2c_write_u8_verify(struct twl4030_usb *twl, { u8 check; - if ((twl4030_i2c_write_u8(module, data, address) >= 0) && - (twl4030_i2c_read_u8(module, &check, address) >= 0) && + if ((twl_i2c_write_u8(module, data, address) >= 0) && + (twl_i2c_read_u8(module, &check, address) >= 0) && (check == data)) return 0; dev_dbg(twl->dev, "Write%d[%d,0x%x] wrote %02x but read %02x\n", 1, module, address, check, data); /* Failed once: Try again */ - if ((twl4030_i2c_write_u8(module, data, address) >= 0) && - (twl4030_i2c_read_u8(module, &check, address) >= 0) && + if ((twl_i2c_write_u8(module, data, address) >= 0) && + (twl_i2c_read_u8(module, &check, address) >= 0) && (check == data)) return 0; dev_dbg(twl->dev, "Write%d[%d,0x%x] wrote %02x but read %02x\n", @@ -303,7 +303,7 @@ static inline int twl4030_usb_write(struct twl4030_usb *twl, { int ret = 0; - ret = twl4030_i2c_write_u8(TWL4030_MODULE_USB, data, address); + ret = twl_i2c_write_u8(TWL4030_MODULE_USB, data, address); if (ret < 0) dev_dbg(twl->dev, "TWL4030:USB:Write[0x%x] Error %d\n", address, ret); @@ -315,7 +315,7 @@ static inline int twl4030_readb(struct twl4030_usb *twl, u8 module, u8 address) u8 data; int ret = 0; - ret = twl4030_i2c_read_u8(module, &data, address); + ret = twl_i2c_read_u8(module, &data, address); if (ret >= 0) ret = data; else @@ -462,7 +462,7 @@ static void twl4030_phy_power(struct twl4030_usb *twl, int on) * SLEEP. We work around this by clearing the bit after usv3v1 * is re-activated. This ensures that VUSB3V1 is really active. */ - twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0, + twl_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0, VUSB_DEDICATED2); regulator_enable(twl->usb1v5); pwr &= ~PHY_PWR_PHYPWD; @@ -505,44 +505,44 @@ static void twl4030_phy_resume(struct twl4030_usb *twl) static int twl4030_usb_ldo_init(struct twl4030_usb *twl) { /* Enable writing to power configuration registers */ - twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, 0xC0, PROTECT_KEY); - twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, 0x0C, PROTECT_KEY); + twl_i2c_write_u8(TWL4030_MODULE_PM_MASTER, 0xC0, PROTECT_KEY); + twl_i2c_write_u8(TWL4030_MODULE_PM_MASTER, 0x0C, PROTECT_KEY); /* put VUSB3V1 LDO in active state */ - twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0, VUSB_DEDICATED2); + twl_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0, VUSB_DEDICATED2); /* input to VUSB3V1 LDO is from VBAT, not VBUS */ - twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0x14, VUSB_DEDICATED1); + twl_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0x14, VUSB_DEDICATED1); /* Initialize 3.1V regulator */ - twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0, VUSB3V1_DEV_GRP); + twl_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0, VUSB3V1_DEV_GRP); twl->usb3v1 = regulator_get(twl->dev, "usb3v1"); if (IS_ERR(twl->usb3v1)) return -ENODEV; - twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0, VUSB3V1_TYPE); + twl_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0, VUSB3V1_TYPE); /* Initialize 1.5V regulator */ - twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0, VUSB1V5_DEV_GRP); + twl_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0, VUSB1V5_DEV_GRP); twl->usb1v5 = regulator_get(twl->dev, "usb1v5"); if (IS_ERR(twl->usb1v5)) goto fail1; - twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0, VUSB1V5_TYPE); + twl_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0, VUSB1V5_TYPE); /* Initialize 1.8V regulator */ - twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0, VUSB1V8_DEV_GRP); + twl_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0, VUSB1V8_DEV_GRP); twl->usb1v8 = regulator_get(twl->dev, "usb1v8"); if (IS_ERR(twl->usb1v8)) goto fail2; - twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0, VUSB1V8_TYPE); + twl_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0, VUSB1V8_TYPE); /* disable access to power configuration registers */ - twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, 0, PROTECT_KEY); + twl_i2c_write_u8(TWL4030_MODULE_PM_MASTER, 0, PROTECT_KEY); return 0; diff --git a/drivers/video/omap/lcd_2430sdp.c b/drivers/video/omap/lcd_2430sdp.c index 3764a36d9142..e3eccc9af78e 100644 --- a/drivers/video/omap/lcd_2430sdp.c +++ b/drivers/video/omap/lcd_2430sdp.c @@ -52,7 +52,7 @@ static unsigned enable_gpio; #define TWL4030_VPLL2_DEV_GRP 0x33 #define TWL4030_VPLL2_DEDICATED 0x36 -#define t2_out(c, r, v) twl4030_i2c_write_u8(c, r, v) +#define t2_out(c, r, v) twl_i2c_write_u8(c, r, v) static int sdp2430_panel_init(struct lcd_panel *panel, diff --git a/drivers/watchdog/twl4030_wdt.c b/drivers/watchdog/twl4030_wdt.c index 20968b2aadef..8162a40d1522 100644 --- a/drivers/watchdog/twl4030_wdt.c +++ b/drivers/watchdog/twl4030_wdt.c @@ -48,7 +48,7 @@ MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started " static int twl4030_wdt_write(unsigned char val) { - return twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, val, + return twl_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, val, TWL4030_WATCHDOG_CFG_REG_OFFS); } diff --git a/include/linux/i2c/twl.h b/include/linux/i2c/twl.h index a50bcf8a4048..0f812f5aa723 100644 --- a/include/linux/i2c/twl.h +++ b/include/linux/i2c/twl.h @@ -22,8 +22,8 @@ * */ -#ifndef __TWL4030_H_ -#define __TWL4030_H_ +#ifndef __TWL_H_ +#define __TWL_H_ #include #include @@ -72,20 +72,37 @@ #define TWL4030_MODULE_RTC 0x16 #define TWL4030_MODULE_SECURED_REG 0x17 +#define TWL_MODULE_USB TWL4030_MODULE_USB +#define TWL_MODULE_AUDIO_VOICE TWL4030_MODULE_AUDIO_VOICE +#define TWL_MODULE_PIH TWL4030_MODULE_PIH +#define TWL_MODULE_MADC TWL4030_MODULE_MADC +#define TWL_MODULE_MAIN_CHARGE TWL4030_MODULE_MAIN_CHARGE +#define TWL_MODULE_PM_MASTER TWL4030_MODULE_PM_MASTER +#define TWL_MODULE_PM_RECEIVER TWL4030_MODULE_PM_RECEIVER +#define TWL_MODULE_RTC TWL4030_MODULE_RTC + +#define GPIO_INTR_OFFSET 0 +#define KEYPAD_INTR_OFFSET 1 +#define BCI_INTR_OFFSET 2 +#define MADC_INTR_OFFSET 3 +#define USB_INTR_OFFSET 4 +#define BCI_PRES_INTR_OFFSET 9 +#define USB_PRES_INTR_OFFSET 10 +#define RTC_INTR_OFFSET 11 /* * Read and write single 8-bit registers */ -int twl4030_i2c_write_u8(u8 mod_no, u8 val, u8 reg); -int twl4030_i2c_read_u8(u8 mod_no, u8 *val, u8 reg); +int twl_i2c_write_u8(u8 mod_no, u8 val, u8 reg); +int twl_i2c_read_u8(u8 mod_no, u8 *val, u8 reg); /* * Read and write several 8-bit registers at once. * - * IMPORTANT: For twl4030_i2c_write(), allocate num_bytes + 1 + * IMPORTANT: For twl_i2c_write(), allocate num_bytes + 1 * for the value, and populate your data starting at offset 1. */ -int twl4030_i2c_write(u8 mod_no, u8 *value, u8 reg, unsigned num_bytes); -int twl4030_i2c_read(u8 mod_no, u8 *value, u8 reg, unsigned num_bytes); +int twl_i2c_write(u8 mod_no, u8 *value, u8 reg, unsigned num_bytes); +int twl_i2c_read(u8 mod_no, u8 *value, u8 reg, unsigned num_bytes); /*----------------------------------------------------------------------*/ diff --git a/sound/soc/codecs/twl4030.c b/sound/soc/codecs/twl4030.c index c3a6ceb542cb..2a27f7b56726 100644 --- a/sound/soc/codecs/twl4030.c +++ b/sound/soc/codecs/twl4030.c @@ -175,7 +175,7 @@ static int twl4030_write(struct snd_soc_codec *codec, { twl4030_write_reg_cache(codec, reg, value); if (likely(reg < TWL4030_REG_SW_SHADOW)) - return twl4030_i2c_write_u8(TWL4030_MODULE_AUDIO_VOICE, value, + return twl_i2c_write_u8(TWL4030_MODULE_AUDIO_VOICE, value, reg); else return 0; @@ -261,7 +261,7 @@ static void twl4030_power_up(struct snd_soc_codec *codec) do { /* this takes a little while, so don't slam i2c */ udelay(2000); - twl4030_i2c_read_u8(TWL4030_MODULE_AUDIO_VOICE, &byte, + twl_i2c_read_u8(TWL4030_MODULE_AUDIO_VOICE, &byte, TWL4030_REG_ANAMICL); } while ((i++ < 100) && ((byte & TWL4030_CNCL_OFFSET_START) == @@ -542,7 +542,7 @@ static int pin_name##pga_event(struct snd_soc_dapm_widget *w, \ break; \ case SND_SOC_DAPM_POST_PMD: \ reg_val = twl4030_read_reg_cache(w->codec, reg); \ - twl4030_i2c_write_u8(TWL4030_MODULE_AUDIO_VOICE, \ + twl_i2c_write_u8(TWL4030_MODULE_AUDIO_VOICE, \ reg_val & (~mask), \ reg); \ break; \ @@ -679,7 +679,7 @@ static void headset_ramp(struct snd_soc_codec *codec, int ramp) mdelay((ramp_base[(hs_pop & TWL4030_RAMP_DELAY) >> 2] / twl4030->sysclk) + 1); /* Bypass the reg_cache to mute the headset */ - twl4030_i2c_write_u8(TWL4030_MODULE_AUDIO_VOICE, + twl_i2c_write_u8(TWL4030_MODULE_AUDIO_VOICE, hs_gain & (~0x0f), TWL4030_REG_HS_GAIN_SET); -- cgit v1.2.3 From 0d64b568fcd48b133721c1d322e7c51d85eb12df Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Sun, 13 Dec 2009 12:42:56 +0100 Subject: ALSA: sound/isa/gus: Correct code taking the size of a pointer sizeof(share_id) is just the size of the pointer. On the other hand, block->share_id is an array, so its size seems more appropriate. A simplified version of the semantic patch that finds this problem is as follows: (http://coccinelle.lip6.fr/) // @@ expression *x; expression f; type T; @@ *f(...,(T)x,...) // Signed-off-by: Julia Lawall Signed-off-by: Takashi Iwai --- sound/isa/gus/gus_mem.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'sound') diff --git a/sound/isa/gus/gus_mem.c b/sound/isa/gus/gus_mem.c index 661205c4dcea..af888a022fc0 100644 --- a/sound/isa/gus/gus_mem.c +++ b/sound/isa/gus/gus_mem.c @@ -127,7 +127,8 @@ static struct snd_gf1_mem_block *snd_gf1_mem_share(struct snd_gf1_mem * alloc, !share_id[2] && !share_id[3]) return NULL; for (block = alloc->first; block; block = block->next) - if (!memcmp(share_id, block->share_id, sizeof(share_id))) + if (!memcmp(share_id, block->share_id, + sizeof(block->share_id))) return block; return NULL; } -- cgit v1.2.3 From bc2580061e42c323d7777029f01318f395edac0d Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Sun, 13 Dec 2009 12:43:15 +0100 Subject: ASoC: Correct code taking the size of a pointer sizeof(codec->reg_cache) is just the size of the pointer. Elsewhere in the file, codec->reg_cache is used with sizeof(wm8900_reg_defaults), so the code is changed to do the same here. A simplified version of the semantic patch that finds this problem is as follows: (http://coccinelle.lip6.fr/) // @@ expression *x; expression f; type T; @@ *f(...,(T)x,...) // Signed-off-by: Julia Lawall Acked-by: Liam Girdwood Signed-off-by: Mark Brown --- sound/soc/codecs/wm8900.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'sound') diff --git a/sound/soc/codecs/wm8900.c b/sound/soc/codecs/wm8900.c index c9438dd62df3..dbc368c08263 100644 --- a/sound/soc/codecs/wm8900.c +++ b/sound/soc/codecs/wm8900.c @@ -199,7 +199,7 @@ static void wm8900_reset(struct snd_soc_codec *codec) snd_soc_write(codec, WM8900_REG_RESET, 0); memcpy(codec->reg_cache, wm8900_reg_defaults, - sizeof(codec->reg_cache)); + sizeof(wm8900_reg_defaults)); } static int wm8900_hp_event(struct snd_soc_dapm_widget *w, -- cgit v1.2.3 From 1cf86f6f9b000e98c1b7f866f99633ae67464e2f Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Tue, 15 Dec 2009 15:54:21 +0900 Subject: ASoC: ak4642: Add default return value in ak4642_modinit If ak4642 driver was compiled without I2C configs, ak4642_modinit return value will become un-stable. This patch modify this bug Reported-by: Magnus Damm Signed-off-by: Kuninori Morimoto Acked-by: Liam Girdwood Signed-off-by: Mark Brown --- sound/soc/codecs/ak4642.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'sound') diff --git a/sound/soc/codecs/ak4642.c b/sound/soc/codecs/ak4642.c index b69861d52161..3ef16bbc8c83 100644 --- a/sound/soc/codecs/ak4642.c +++ b/sound/soc/codecs/ak4642.c @@ -470,7 +470,7 @@ EXPORT_SYMBOL_GPL(soc_codec_dev_ak4642); static int __init ak4642_modinit(void) { - int ret; + int ret = 0; #if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE) ret = i2c_add_driver(&ak4642_i2c_driver); #endif -- cgit v1.2.3 From 471452104b8520337ae2fb48c4e61cd4896e025d Mon Sep 17 00:00:00 2001 From: Alexey Dobriyan Date: Mon, 14 Dec 2009 18:00:08 -0800 Subject: const: constify remaining dev_pm_ops Signed-off-by: Alexey Dobriyan Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/arm/plat-omap/debug-leds.c | 2 +- arch/arm/plat-omap/gpio.c | 2 +- arch/s390/appldata/appldata_base.c | 2 +- drivers/block/floppy.c | 2 +- drivers/char/hvc_iucv.c | 2 +- drivers/dma/at_hdmac.c | 2 +- drivers/dma/dw_dmac.c | 2 +- drivers/dma/txx9dmac.c | 2 +- drivers/hwmon/applesmc.c | 2 +- drivers/i2c/busses/i2c-pxa.c | 2 +- drivers/i2c/busses/i2c-s3c2410.c | 2 +- drivers/i2c/busses/i2c-sh_mobile.c | 2 +- drivers/input/keyboard/adp5588-keys.c | 2 +- drivers/input/keyboard/sh_keysc.c | 2 +- drivers/input/misc/bfin_rotary.c | 2 +- drivers/input/misc/pcspkr.c | 2 +- drivers/input/touchscreen/pcap_ts.c | 2 +- drivers/media/video/davinci/vpfe_capture.c | 2 +- drivers/media/video/davinci/vpif_capture.c | 2 +- drivers/media/video/sh_mobile_ceu_camera.c | 2 +- drivers/mmc/host/pxamci.c | 2 +- drivers/mmc/host/s3cmci.c | 2 +- drivers/mtd/nand/nomadik_nand.c | 2 +- drivers/net/3c59x.c | 2 +- drivers/net/dm9000.c | 2 +- drivers/net/r8169.c | 2 +- drivers/net/smsc911x.c | 2 +- drivers/net/vmxnet3/vmxnet3_drv.c | 2 +- drivers/pci/pcie/portdrv_pci.c | 2 +- drivers/pcmcia/pxa2xx_base.c | 2 +- drivers/pcmcia/yenta_socket.c | 2 +- drivers/platform/x86/acerhdf.c | 2 +- drivers/platform/x86/eeepc-laptop.c | 2 +- drivers/platform/x86/hp-wmi.c | 2 +- drivers/power/wm97xx_battery.c | 2 +- drivers/rtc/rtc-pxa.c | 2 +- drivers/rtc/rtc-sa1100.c | 2 +- drivers/rtc/rtc-sh.c | 2 +- drivers/rtc/rtc-wm831x.c | 2 +- drivers/s390/block/dcssblk.c | 2 +- drivers/s390/block/xpram.c | 2 +- drivers/s390/char/monreader.c | 2 +- drivers/s390/char/monwriter.c | 2 +- drivers/s390/char/sclp.c | 2 +- drivers/s390/char/sclp_cmd.c | 2 +- drivers/s390/char/vmlogrdr.c | 2 +- drivers/s390/cio/ccwgroup.c | 2 +- drivers/s390/cio/css.c | 2 +- drivers/s390/cio/device.c | 2 +- drivers/s390/net/netiucv.c | 2 +- drivers/s390/net/smsgiucv.c | 2 +- drivers/serial/pxa.c | 2 +- drivers/serial/sh-sci.c | 2 +- drivers/spi/pxa2xx_spi.c | 2 +- drivers/spi/spi_s3c24xx.c | 2 +- drivers/uio/uio_pdrv_genirq.c | 2 +- drivers/usb/core/hcd-pci.c | 2 +- drivers/usb/core/hcd.h | 2 +- drivers/usb/core/usb.c | 2 +- drivers/usb/host/ehci-au1xxx.c | 2 +- drivers/usb/host/ohci-au1xxx.c | 2 +- drivers/usb/host/ohci-pxa27x.c | 2 +- drivers/usb/host/r8a66597-hcd.c | 2 +- drivers/usb/musb/musb_core.c | 2 +- drivers/video/backlight/da903x_bl.c | 2 +- drivers/video/hitfb.c | 2 +- drivers/video/pxafb.c | 2 +- drivers/video/sh_mobile_lcdcfb.c | 2 +- drivers/watchdog/adx_wdt.c | 2 +- include/linux/pm.h | 2 +- net/iucv/af_iucv.c | 2 +- net/iucv/iucv.c | 2 +- sound/arm/pxa2xx-ac97.c | 2 +- sound/soc/s3c24xx/s3c24xx_simtec.c | 2 +- sound/soc/s3c24xx/s3c24xx_simtec.h | 2 +- sound/soc/soc-core.c | 2 +- 76 files changed, 76 insertions(+), 76 deletions(-) (limited to 'sound') diff --git a/arch/arm/plat-omap/debug-leds.c b/arch/arm/plat-omap/debug-leds.c index 6c768b71ad64..53fcef7c5201 100644 --- a/arch/arm/plat-omap/debug-leds.c +++ b/arch/arm/plat-omap/debug-leds.c @@ -293,7 +293,7 @@ static int fpga_resume_noirq(struct device *dev) return 0; } -static struct dev_pm_ops fpga_dev_pm_ops = { +static const struct dev_pm_ops fpga_dev_pm_ops = { .suspend_noirq = fpga_suspend_noirq, .resume_noirq = fpga_resume_noirq, }; diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c index 055160e0620e..04846811d0aa 100644 --- a/arch/arm/plat-omap/gpio.c +++ b/arch/arm/plat-omap/gpio.c @@ -1431,7 +1431,7 @@ static int omap_mpuio_resume_noirq(struct device *dev) return 0; } -static struct dev_pm_ops omap_mpuio_dev_pm_ops = { +static const struct dev_pm_ops omap_mpuio_dev_pm_ops = { .suspend_noirq = omap_mpuio_suspend_noirq, .resume_noirq = omap_mpuio_resume_noirq, }; diff --git a/arch/s390/appldata/appldata_base.c b/arch/s390/appldata/appldata_base.c index 495589950dc7..5c91995b74e4 100644 --- a/arch/s390/appldata/appldata_base.c +++ b/arch/s390/appldata/appldata_base.c @@ -551,7 +551,7 @@ static int appldata_thaw(struct device *dev) return appldata_restore(dev); } -static struct dev_pm_ops appldata_pm_ops = { +static const struct dev_pm_ops appldata_pm_ops = { .freeze = appldata_freeze, .thaw = appldata_thaw, .restore = appldata_restore, diff --git a/drivers/block/floppy.c b/drivers/block/floppy.c index 5c01f747571b..d41d7f018549 100644 --- a/drivers/block/floppy.c +++ b/drivers/block/floppy.c @@ -4162,7 +4162,7 @@ static int floppy_resume(struct device *dev) return 0; } -static struct dev_pm_ops floppy_pm_ops = { +static const struct dev_pm_ops floppy_pm_ops = { .resume = floppy_resume, .restore = floppy_resume, }; diff --git a/drivers/char/hvc_iucv.c b/drivers/char/hvc_iucv.c index b8a5d654d3d0..fe62bd0e17b7 100644 --- a/drivers/char/hvc_iucv.c +++ b/drivers/char/hvc_iucv.c @@ -931,7 +931,7 @@ static struct hv_ops hvc_iucv_ops = { }; /* Suspend / resume device operations */ -static struct dev_pm_ops hvc_iucv_pm_ops = { +static const struct dev_pm_ops hvc_iucv_pm_ops = { .freeze = hvc_iucv_pm_freeze, .thaw = hvc_iucv_pm_restore_thaw, .restore = hvc_iucv_pm_restore_thaw, diff --git a/drivers/dma/at_hdmac.c b/drivers/dma/at_hdmac.c index c52ac9efd0bf..f15112569c1d 100644 --- a/drivers/dma/at_hdmac.c +++ b/drivers/dma/at_hdmac.c @@ -1188,7 +1188,7 @@ static int at_dma_resume_noirq(struct device *dev) return 0; } -static struct dev_pm_ops at_dma_dev_pm_ops = { +static const struct dev_pm_ops at_dma_dev_pm_ops = { .suspend_noirq = at_dma_suspend_noirq, .resume_noirq = at_dma_resume_noirq, }; diff --git a/drivers/dma/dw_dmac.c b/drivers/dma/dw_dmac.c index 2eea823516a7..285bed0fe17b 100644 --- a/drivers/dma/dw_dmac.c +++ b/drivers/dma/dw_dmac.c @@ -1427,7 +1427,7 @@ static int dw_resume_noirq(struct device *dev) return 0; } -static struct dev_pm_ops dw_dev_pm_ops = { +static const struct dev_pm_ops dw_dev_pm_ops = { .suspend_noirq = dw_suspend_noirq, .resume_noirq = dw_resume_noirq, }; diff --git a/drivers/dma/txx9dmac.c b/drivers/dma/txx9dmac.c index fb6bb64e8861..3ebc61067e54 100644 --- a/drivers/dma/txx9dmac.c +++ b/drivers/dma/txx9dmac.c @@ -1313,7 +1313,7 @@ static int txx9dmac_resume_noirq(struct device *dev) } -static struct dev_pm_ops txx9dmac_dev_pm_ops = { +static const struct dev_pm_ops txx9dmac_dev_pm_ops = { .suspend_noirq = txx9dmac_suspend_noirq, .resume_noirq = txx9dmac_resume_noirq, }; diff --git a/drivers/hwmon/applesmc.c b/drivers/hwmon/applesmc.c index 7ea6a8f66056..c1605b528e8f 100644 --- a/drivers/hwmon/applesmc.c +++ b/drivers/hwmon/applesmc.c @@ -518,7 +518,7 @@ static int applesmc_pm_restore(struct device *dev) return applesmc_pm_resume(dev); } -static struct dev_pm_ops applesmc_pm_ops = { +static const struct dev_pm_ops applesmc_pm_ops = { .resume = applesmc_pm_resume, .restore = applesmc_pm_restore, }; diff --git a/drivers/i2c/busses/i2c-pxa.c b/drivers/i2c/busses/i2c-pxa.c index 049555777f67..7647a20523a0 100644 --- a/drivers/i2c/busses/i2c-pxa.c +++ b/drivers/i2c/busses/i2c-pxa.c @@ -1155,7 +1155,7 @@ static int i2c_pxa_resume_noirq(struct device *dev) return 0; } -static struct dev_pm_ops i2c_pxa_dev_pm_ops = { +static const struct dev_pm_ops i2c_pxa_dev_pm_ops = { .suspend_noirq = i2c_pxa_suspend_noirq, .resume_noirq = i2c_pxa_resume_noirq, }; diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c index 96aafb91b69a..1d8c98613fa0 100644 --- a/drivers/i2c/busses/i2c-s3c2410.c +++ b/drivers/i2c/busses/i2c-s3c2410.c @@ -967,7 +967,7 @@ static int s3c24xx_i2c_resume(struct device *dev) return 0; } -static struct dev_pm_ops s3c24xx_i2c_dev_pm_ops = { +static const struct dev_pm_ops s3c24xx_i2c_dev_pm_ops = { .suspend_noirq = s3c24xx_i2c_suspend_noirq, .resume = s3c24xx_i2c_resume, }; diff --git a/drivers/i2c/busses/i2c-sh_mobile.c b/drivers/i2c/busses/i2c-sh_mobile.c index 86a9d4e81472..ccc46418ef7f 100644 --- a/drivers/i2c/busses/i2c-sh_mobile.c +++ b/drivers/i2c/busses/i2c-sh_mobile.c @@ -647,7 +647,7 @@ static int sh_mobile_i2c_runtime_nop(struct device *dev) return 0; } -static struct dev_pm_ops sh_mobile_i2c_dev_pm_ops = { +static const struct dev_pm_ops sh_mobile_i2c_dev_pm_ops = { .runtime_suspend = sh_mobile_i2c_runtime_nop, .runtime_resume = sh_mobile_i2c_runtime_nop, }; diff --git a/drivers/input/keyboard/adp5588-keys.c b/drivers/input/keyboard/adp5588-keys.c index d48c808d5928..1edb596d927b 100644 --- a/drivers/input/keyboard/adp5588-keys.c +++ b/drivers/input/keyboard/adp5588-keys.c @@ -319,7 +319,7 @@ static int adp5588_resume(struct device *dev) return 0; } -static struct dev_pm_ops adp5588_dev_pm_ops = { +static const struct dev_pm_ops adp5588_dev_pm_ops = { .suspend = adp5588_suspend, .resume = adp5588_resume, }; diff --git a/drivers/input/keyboard/sh_keysc.c b/drivers/input/keyboard/sh_keysc.c index 076111fc72d2..8e9380bfed40 100644 --- a/drivers/input/keyboard/sh_keysc.c +++ b/drivers/input/keyboard/sh_keysc.c @@ -295,7 +295,7 @@ static int sh_keysc_resume(struct device *dev) return 0; } -static struct dev_pm_ops sh_keysc_dev_pm_ops = { +static const struct dev_pm_ops sh_keysc_dev_pm_ops = { .suspend = sh_keysc_suspend, .resume = sh_keysc_resume, }; diff --git a/drivers/input/misc/bfin_rotary.c b/drivers/input/misc/bfin_rotary.c index 690f3fafa03b..61d10177fa83 100644 --- a/drivers/input/misc/bfin_rotary.c +++ b/drivers/input/misc/bfin_rotary.c @@ -247,7 +247,7 @@ static int bfin_rotary_resume(struct device *dev) return 0; } -static struct dev_pm_ops bfin_rotary_pm_ops = { +static const struct dev_pm_ops bfin_rotary_pm_ops = { .suspend = bfin_rotary_suspend, .resume = bfin_rotary_resume, }; diff --git a/drivers/input/misc/pcspkr.c b/drivers/input/misc/pcspkr.c index 21cb755a54fb..ea4e1fd12651 100644 --- a/drivers/input/misc/pcspkr.c +++ b/drivers/input/misc/pcspkr.c @@ -127,7 +127,7 @@ static void pcspkr_shutdown(struct platform_device *dev) pcspkr_event(NULL, EV_SND, SND_BELL, 0); } -static struct dev_pm_ops pcspkr_pm_ops = { +static const struct dev_pm_ops pcspkr_pm_ops = { .suspend = pcspkr_suspend, }; diff --git a/drivers/input/touchscreen/pcap_ts.c b/drivers/input/touchscreen/pcap_ts.c index 67fcd33595de..b79097e3028a 100644 --- a/drivers/input/touchscreen/pcap_ts.c +++ b/drivers/input/touchscreen/pcap_ts.c @@ -233,7 +233,7 @@ static int pcap_ts_resume(struct device *dev) return 0; } -static struct dev_pm_ops pcap_ts_pm_ops = { +static const struct dev_pm_ops pcap_ts_pm_ops = { .suspend = pcap_ts_suspend, .resume = pcap_ts_resume, }; diff --git a/drivers/media/video/davinci/vpfe_capture.c b/drivers/media/video/davinci/vpfe_capture.c index 12a1b3d7132d..c3916a42668e 100644 --- a/drivers/media/video/davinci/vpfe_capture.c +++ b/drivers/media/video/davinci/vpfe_capture.c @@ -2127,7 +2127,7 @@ vpfe_resume(struct device *dev) return -1; } -static struct dev_pm_ops vpfe_dev_pm_ops = { +static const struct dev_pm_ops vpfe_dev_pm_ops = { .suspend = vpfe_suspend, .resume = vpfe_resume, }; diff --git a/drivers/media/video/davinci/vpif_capture.c b/drivers/media/video/davinci/vpif_capture.c index d947ee5e4eb4..78130721f578 100644 --- a/drivers/media/video/davinci/vpif_capture.c +++ b/drivers/media/video/davinci/vpif_capture.c @@ -2107,7 +2107,7 @@ vpif_resume(struct device *dev) return -1; } -static struct dev_pm_ops vpif_dev_pm_ops = { +static const struct dev_pm_ops vpif_dev_pm_ops = { .suspend = vpif_suspend, .resume = vpif_resume, }; diff --git a/drivers/media/video/sh_mobile_ceu_camera.c b/drivers/media/video/sh_mobile_ceu_camera.c index a4f3472d4db8..961e4484d721 100644 --- a/drivers/media/video/sh_mobile_ceu_camera.c +++ b/drivers/media/video/sh_mobile_ceu_camera.c @@ -1825,7 +1825,7 @@ static int sh_mobile_ceu_runtime_nop(struct device *dev) return 0; } -static struct dev_pm_ops sh_mobile_ceu_dev_pm_ops = { +static const struct dev_pm_ops sh_mobile_ceu_dev_pm_ops = { .runtime_suspend = sh_mobile_ceu_runtime_nop, .runtime_resume = sh_mobile_ceu_runtime_nop, }; diff --git a/drivers/mmc/host/pxamci.c b/drivers/mmc/host/pxamci.c index bb47ff465c04..0d783f3e79ed 100644 --- a/drivers/mmc/host/pxamci.c +++ b/drivers/mmc/host/pxamci.c @@ -828,7 +828,7 @@ static int pxamci_resume(struct device *dev) return ret; } -static struct dev_pm_ops pxamci_pm_ops = { +static const struct dev_pm_ops pxamci_pm_ops = { .suspend = pxamci_suspend, .resume = pxamci_resume, }; diff --git a/drivers/mmc/host/s3cmci.c b/drivers/mmc/host/s3cmci.c index 941a4d35ef8d..ec15f1bbf8b9 100644 --- a/drivers/mmc/host/s3cmci.c +++ b/drivers/mmc/host/s3cmci.c @@ -1892,7 +1892,7 @@ static int s3cmci_resume(struct device *dev) return mmc_resume_host(mmc); } -static struct dev_pm_ops s3cmci_pm = { +static const struct dev_pm_ops s3cmci_pm = { .suspend = s3cmci_suspend, .resume = s3cmci_resume, }; diff --git a/drivers/mtd/nand/nomadik_nand.c b/drivers/mtd/nand/nomadik_nand.c index 7c302d55910e..66123419f65d 100644 --- a/drivers/mtd/nand/nomadik_nand.c +++ b/drivers/mtd/nand/nomadik_nand.c @@ -216,7 +216,7 @@ static int nomadik_nand_resume(struct device *dev) return 0; } -static struct dev_pm_ops nomadik_nand_pm_ops = { +static const struct dev_pm_ops nomadik_nand_pm_ops = { .suspend = nomadik_nand_suspend, .resume = nomadik_nand_resume, }; diff --git a/drivers/net/3c59x.c b/drivers/net/3c59x.c index 78b7167a8ce3..39db0e96815d 100644 --- a/drivers/net/3c59x.c +++ b/drivers/net/3c59x.c @@ -837,7 +837,7 @@ static int vortex_resume(struct device *dev) return 0; } -static struct dev_pm_ops vortex_pm_ops = { +static const struct dev_pm_ops vortex_pm_ops = { .suspend = vortex_suspend, .resume = vortex_resume, .freeze = vortex_suspend, diff --git a/drivers/net/dm9000.c b/drivers/net/dm9000.c index 0cbe3c0e7c06..b37730065688 100644 --- a/drivers/net/dm9000.c +++ b/drivers/net/dm9000.c @@ -1646,7 +1646,7 @@ dm9000_drv_resume(struct device *dev) return 0; } -static struct dev_pm_ops dm9000_drv_pm_ops = { +static const struct dev_pm_ops dm9000_drv_pm_ops = { .suspend = dm9000_drv_suspend, .resume = dm9000_drv_resume, }; diff --git a/drivers/net/r8169.c b/drivers/net/r8169.c index acfc5a3aa490..60f96c468a24 100644 --- a/drivers/net/r8169.c +++ b/drivers/net/r8169.c @@ -4859,7 +4859,7 @@ out: return 0; } -static struct dev_pm_ops rtl8169_pm_ops = { +static const struct dev_pm_ops rtl8169_pm_ops = { .suspend = rtl8169_suspend, .resume = rtl8169_resume, .freeze = rtl8169_suspend, diff --git a/drivers/net/smsc911x.c b/drivers/net/smsc911x.c index 20d6095cf411..494cd91ea39c 100644 --- a/drivers/net/smsc911x.c +++ b/drivers/net/smsc911x.c @@ -2154,7 +2154,7 @@ static int smsc911x_resume(struct device *dev) return (to == 0) ? -EIO : 0; } -static struct dev_pm_ops smsc911x_pm_ops = { +static const struct dev_pm_ops smsc911x_pm_ops = { .suspend = smsc911x_suspend, .resume = smsc911x_resume, }; diff --git a/drivers/net/vmxnet3/vmxnet3_drv.c b/drivers/net/vmxnet3/vmxnet3_drv.c index 1ceb9d0f8b97..9cc438282d77 100644 --- a/drivers/net/vmxnet3/vmxnet3_drv.c +++ b/drivers/net/vmxnet3/vmxnet3_drv.c @@ -2689,7 +2689,7 @@ vmxnet3_resume(struct device *device) return 0; } -static struct dev_pm_ops vmxnet3_pm_ops = { +static const struct dev_pm_ops vmxnet3_pm_ops = { .suspend = vmxnet3_suspend, .resume = vmxnet3_resume, }; diff --git a/drivers/pci/pcie/portdrv_pci.c b/drivers/pci/pcie/portdrv_pci.c index ce52ea34fee5..a49452e2aed9 100644 --- a/drivers/pci/pcie/portdrv_pci.c +++ b/drivers/pci/pcie/portdrv_pci.c @@ -43,7 +43,7 @@ static int pcie_portdrv_restore_config(struct pci_dev *dev) } #ifdef CONFIG_PM -static struct dev_pm_ops pcie_portdrv_pm_ops = { +static const struct dev_pm_ops pcie_portdrv_pm_ops = { .suspend = pcie_port_device_suspend, .resume = pcie_port_device_resume, .freeze = pcie_port_device_suspend, diff --git a/drivers/pcmcia/pxa2xx_base.c b/drivers/pcmcia/pxa2xx_base.c index da346eb7e77e..3aabf1e37988 100644 --- a/drivers/pcmcia/pxa2xx_base.c +++ b/drivers/pcmcia/pxa2xx_base.c @@ -336,7 +336,7 @@ static int pxa2xx_drv_pcmcia_resume(struct device *dev) return pcmcia_socket_dev_resume(dev); } -static struct dev_pm_ops pxa2xx_drv_pcmcia_pm_ops = { +static const struct dev_pm_ops pxa2xx_drv_pcmcia_pm_ops = { .suspend = pxa2xx_drv_pcmcia_suspend, .resume = pxa2xx_drv_pcmcia_resume, }; diff --git a/drivers/pcmcia/yenta_socket.c b/drivers/pcmcia/yenta_socket.c index fe02cfd4b5e9..e4d12acdd525 100644 --- a/drivers/pcmcia/yenta_socket.c +++ b/drivers/pcmcia/yenta_socket.c @@ -1330,7 +1330,7 @@ static int yenta_dev_resume(struct device *dev) return 0; } -static struct dev_pm_ops yenta_pm_ops = { +static const struct dev_pm_ops yenta_pm_ops = { .suspend_noirq = yenta_dev_suspend_noirq, .resume_noirq = yenta_dev_resume_noirq, .resume = yenta_dev_resume, diff --git a/drivers/platform/x86/acerhdf.c b/drivers/platform/x86/acerhdf.c index ab64522aaa64..be27aa47e810 100644 --- a/drivers/platform/x86/acerhdf.c +++ b/drivers/platform/x86/acerhdf.c @@ -460,7 +460,7 @@ static int acerhdf_remove(struct platform_device *device) return 0; } -static struct dev_pm_ops acerhdf_pm_ops = { +static const struct dev_pm_ops acerhdf_pm_ops = { .suspend = acerhdf_suspend, .freeze = acerhdf_suspend, }; diff --git a/drivers/platform/x86/eeepc-laptop.c b/drivers/platform/x86/eeepc-laptop.c index 4226e5352738..e647a856b9bf 100644 --- a/drivers/platform/x86/eeepc-laptop.c +++ b/drivers/platform/x86/eeepc-laptop.c @@ -154,7 +154,7 @@ static struct eeepc_hotk *ehotk; static int eeepc_hotk_thaw(struct device *device); static int eeepc_hotk_restore(struct device *device); -static struct dev_pm_ops eeepc_pm_ops = { +static const struct dev_pm_ops eeepc_pm_ops = { .thaw = eeepc_hotk_thaw, .restore = eeepc_hotk_restore, }; diff --git a/drivers/platform/x86/hp-wmi.c b/drivers/platform/x86/hp-wmi.c index c2842171cec6..f00a71c58e69 100644 --- a/drivers/platform/x86/hp-wmi.c +++ b/drivers/platform/x86/hp-wmi.c @@ -94,7 +94,7 @@ static struct rfkill *wifi_rfkill; static struct rfkill *bluetooth_rfkill; static struct rfkill *wwan_rfkill; -static struct dev_pm_ops hp_wmi_pm_ops = { +static const struct dev_pm_ops hp_wmi_pm_ops = { .resume = hp_wmi_resume_handler, .restore = hp_wmi_resume_handler, }; diff --git a/drivers/power/wm97xx_battery.c b/drivers/power/wm97xx_battery.c index f2bfd296dbae..fa39e759a275 100644 --- a/drivers/power/wm97xx_battery.c +++ b/drivers/power/wm97xx_battery.c @@ -157,7 +157,7 @@ static int wm97xx_bat_resume(struct device *dev) return 0; } -static struct dev_pm_ops wm97xx_bat_pm_ops = { +static const struct dev_pm_ops wm97xx_bat_pm_ops = { .suspend = wm97xx_bat_suspend, .resume = wm97xx_bat_resume, }; diff --git a/drivers/rtc/rtc-pxa.c b/drivers/rtc/rtc-pxa.c index 747ca194fad4..e6351b743da6 100644 --- a/drivers/rtc/rtc-pxa.c +++ b/drivers/rtc/rtc-pxa.c @@ -456,7 +456,7 @@ static int pxa_rtc_resume(struct device *dev) return 0; } -static struct dev_pm_ops pxa_rtc_pm_ops = { +static const struct dev_pm_ops pxa_rtc_pm_ops = { .suspend = pxa_rtc_suspend, .resume = pxa_rtc_resume, }; diff --git a/drivers/rtc/rtc-sa1100.c b/drivers/rtc/rtc-sa1100.c index 29f98a70586e..e4a44b641702 100644 --- a/drivers/rtc/rtc-sa1100.c +++ b/drivers/rtc/rtc-sa1100.c @@ -407,7 +407,7 @@ static int sa1100_rtc_resume(struct device *dev) return 0; } -static struct dev_pm_ops sa1100_rtc_pm_ops = { +static const struct dev_pm_ops sa1100_rtc_pm_ops = { .suspend = sa1100_rtc_suspend, .resume = sa1100_rtc_resume, }; diff --git a/drivers/rtc/rtc-sh.c b/drivers/rtc/rtc-sh.c index e6ed5404bca0..e95cc6f8d61e 100644 --- a/drivers/rtc/rtc-sh.c +++ b/drivers/rtc/rtc-sh.c @@ -826,7 +826,7 @@ static int sh_rtc_resume(struct device *dev) return 0; } -static struct dev_pm_ops sh_rtc_dev_pm_ops = { +static const struct dev_pm_ops sh_rtc_dev_pm_ops = { .suspend = sh_rtc_suspend, .resume = sh_rtc_resume, }; diff --git a/drivers/rtc/rtc-wm831x.c b/drivers/rtc/rtc-wm831x.c index 79795cdf6ed8..000c7e481e59 100644 --- a/drivers/rtc/rtc-wm831x.c +++ b/drivers/rtc/rtc-wm831x.c @@ -485,7 +485,7 @@ static int __devexit wm831x_rtc_remove(struct platform_device *pdev) return 0; } -static struct dev_pm_ops wm831x_rtc_pm_ops = { +static const struct dev_pm_ops wm831x_rtc_pm_ops = { .suspend = wm831x_rtc_suspend, .resume = wm831x_rtc_resume, diff --git a/drivers/s390/block/dcssblk.c b/drivers/s390/block/dcssblk.c index f76f4bd82b9f..9b43ae94beba 100644 --- a/drivers/s390/block/dcssblk.c +++ b/drivers/s390/block/dcssblk.c @@ -1005,7 +1005,7 @@ static int dcssblk_thaw(struct device *dev) return 0; } -static struct dev_pm_ops dcssblk_pm_ops = { +static const struct dev_pm_ops dcssblk_pm_ops = { .freeze = dcssblk_freeze, .thaw = dcssblk_thaw, .restore = dcssblk_restore, diff --git a/drivers/s390/block/xpram.c b/drivers/s390/block/xpram.c index 116d1b3eeb15..118de392af63 100644 --- a/drivers/s390/block/xpram.c +++ b/drivers/s390/block/xpram.c @@ -407,7 +407,7 @@ static int xpram_restore(struct device *dev) return 0; } -static struct dev_pm_ops xpram_pm_ops = { +static const struct dev_pm_ops xpram_pm_ops = { .restore = xpram_restore, }; diff --git a/drivers/s390/char/monreader.c b/drivers/s390/char/monreader.c index 60473f86e1f9..33e96484d54f 100644 --- a/drivers/s390/char/monreader.c +++ b/drivers/s390/char/monreader.c @@ -529,7 +529,7 @@ static int monreader_restore(struct device *dev) return monreader_thaw(dev); } -static struct dev_pm_ops monreader_pm_ops = { +static const struct dev_pm_ops monreader_pm_ops = { .freeze = monreader_freeze, .thaw = monreader_thaw, .restore = monreader_restore, diff --git a/drivers/s390/char/monwriter.c b/drivers/s390/char/monwriter.c index 6532ed8b4afa..668a0579b26b 100644 --- a/drivers/s390/char/monwriter.c +++ b/drivers/s390/char/monwriter.c @@ -323,7 +323,7 @@ static int monwriter_thaw(struct device *dev) return monwriter_restore(dev); } -static struct dev_pm_ops monwriter_pm_ops = { +static const struct dev_pm_ops monwriter_pm_ops = { .freeze = monwriter_freeze, .thaw = monwriter_thaw, .restore = monwriter_restore, diff --git a/drivers/s390/char/sclp.c b/drivers/s390/char/sclp.c index a983f5086788..ec88c59842e3 100644 --- a/drivers/s390/char/sclp.c +++ b/drivers/s390/char/sclp.c @@ -1019,7 +1019,7 @@ static int sclp_restore(struct device *dev) return sclp_undo_suspend(SCLP_PM_EVENT_RESTORE); } -static struct dev_pm_ops sclp_pm_ops = { +static const struct dev_pm_ops sclp_pm_ops = { .freeze = sclp_freeze, .thaw = sclp_thaw, .restore = sclp_restore, diff --git a/drivers/s390/char/sclp_cmd.c b/drivers/s390/char/sclp_cmd.c index 28b5afc129c3..b3beab610da4 100644 --- a/drivers/s390/char/sclp_cmd.c +++ b/drivers/s390/char/sclp_cmd.c @@ -547,7 +547,7 @@ struct read_storage_sccb { u32 entries[0]; } __packed; -static struct dev_pm_ops sclp_mem_pm_ops = { +static const struct dev_pm_ops sclp_mem_pm_ops = { .freeze = sclp_mem_freeze, }; diff --git a/drivers/s390/char/vmlogrdr.c b/drivers/s390/char/vmlogrdr.c index 899aa795bf38..7dfa5412d5a8 100644 --- a/drivers/s390/char/vmlogrdr.c +++ b/drivers/s390/char/vmlogrdr.c @@ -675,7 +675,7 @@ static int vmlogrdr_pm_prepare(struct device *dev) } -static struct dev_pm_ops vmlogrdr_pm_ops = { +static const struct dev_pm_ops vmlogrdr_pm_ops = { .prepare = vmlogrdr_pm_prepare, }; diff --git a/drivers/s390/cio/ccwgroup.c b/drivers/s390/cio/ccwgroup.c index a5a62f1f7747..5f97ea2ee6b1 100644 --- a/drivers/s390/cio/ccwgroup.c +++ b/drivers/s390/cio/ccwgroup.c @@ -560,7 +560,7 @@ static int ccwgroup_pm_restore(struct device *dev) return gdrv->restore ? gdrv->restore(gdev) : 0; } -static struct dev_pm_ops ccwgroup_pm_ops = { +static const struct dev_pm_ops ccwgroup_pm_ops = { .prepare = ccwgroup_pm_prepare, .complete = ccwgroup_pm_complete, .freeze = ccwgroup_pm_freeze, diff --git a/drivers/s390/cio/css.c b/drivers/s390/cio/css.c index 92ff88ac1107..7679aee6fa14 100644 --- a/drivers/s390/cio/css.c +++ b/drivers/s390/cio/css.c @@ -1148,7 +1148,7 @@ static int css_pm_restore(struct device *dev) return drv->restore ? drv->restore(sch) : 0; } -static struct dev_pm_ops css_pm_ops = { +static const struct dev_pm_ops css_pm_ops = { .prepare = css_pm_prepare, .complete = css_pm_complete, .freeze = css_pm_freeze, diff --git a/drivers/s390/cio/device.c b/drivers/s390/cio/device.c index 9fecfb4223a8..73901c9e260f 100644 --- a/drivers/s390/cio/device.c +++ b/drivers/s390/cio/device.c @@ -1904,7 +1904,7 @@ out_unlock: return ret; } -static struct dev_pm_ops ccw_pm_ops = { +static const struct dev_pm_ops ccw_pm_ops = { .prepare = ccw_device_pm_prepare, .complete = ccw_device_pm_complete, .freeze = ccw_device_pm_freeze, diff --git a/drivers/s390/net/netiucv.c b/drivers/s390/net/netiucv.c index 98c04cac43c1..65ebee0a3266 100644 --- a/drivers/s390/net/netiucv.c +++ b/drivers/s390/net/netiucv.c @@ -159,7 +159,7 @@ static void netiucv_pm_complete(struct device *); static int netiucv_pm_freeze(struct device *); static int netiucv_pm_restore_thaw(struct device *); -static struct dev_pm_ops netiucv_pm_ops = { +static const struct dev_pm_ops netiucv_pm_ops = { .prepare = netiucv_pm_prepare, .complete = netiucv_pm_complete, .freeze = netiucv_pm_freeze, diff --git a/drivers/s390/net/smsgiucv.c b/drivers/s390/net/smsgiucv.c index 3012355f8304..67f2485d2372 100644 --- a/drivers/s390/net/smsgiucv.c +++ b/drivers/s390/net/smsgiucv.c @@ -168,7 +168,7 @@ static int smsg_pm_restore_thaw(struct device *dev) return 0; } -static struct dev_pm_ops smsg_pm_ops = { +static const struct dev_pm_ops smsg_pm_ops = { .freeze = smsg_pm_freeze, .thaw = smsg_pm_restore_thaw, .restore = smsg_pm_restore_thaw, diff --git a/drivers/serial/pxa.c b/drivers/serial/pxa.c index 4a821046baae..56ee082157aa 100644 --- a/drivers/serial/pxa.c +++ b/drivers/serial/pxa.c @@ -756,7 +756,7 @@ static int serial_pxa_resume(struct device *dev) return 0; } -static struct dev_pm_ops serial_pxa_pm_ops = { +static const struct dev_pm_ops serial_pxa_pm_ops = { .suspend = serial_pxa_suspend, .resume = serial_pxa_resume, }; diff --git a/drivers/serial/sh-sci.c b/drivers/serial/sh-sci.c index ff38dbdb5c6e..7e3f4ff58cfd 100644 --- a/drivers/serial/sh-sci.c +++ b/drivers/serial/sh-sci.c @@ -1312,7 +1312,7 @@ static int sci_resume(struct device *dev) return 0; } -static struct dev_pm_ops sci_dev_pm_ops = { +static const struct dev_pm_ops sci_dev_pm_ops = { .suspend = sci_suspend, .resume = sci_resume, }; diff --git a/drivers/spi/pxa2xx_spi.c b/drivers/spi/pxa2xx_spi.c index c8c2b693ffac..c2f707e5ce74 100644 --- a/drivers/spi/pxa2xx_spi.c +++ b/drivers/spi/pxa2xx_spi.c @@ -1709,7 +1709,7 @@ static int pxa2xx_spi_resume(struct device *dev) return 0; } -static struct dev_pm_ops pxa2xx_spi_pm_ops = { +static const struct dev_pm_ops pxa2xx_spi_pm_ops = { .suspend = pxa2xx_spi_suspend, .resume = pxa2xx_spi_resume, }; diff --git a/drivers/spi/spi_s3c24xx.c b/drivers/spi/spi_s3c24xx.c index 33d94f76b9ef..276591569c8b 100644 --- a/drivers/spi/spi_s3c24xx.c +++ b/drivers/spi/spi_s3c24xx.c @@ -489,7 +489,7 @@ static int s3c24xx_spi_resume(struct device *dev) return 0; } -static struct dev_pm_ops s3c24xx_spi_pmops = { +static const struct dev_pm_ops s3c24xx_spi_pmops = { .suspend = s3c24xx_spi_suspend, .resume = s3c24xx_spi_resume, }; diff --git a/drivers/uio/uio_pdrv_genirq.c b/drivers/uio/uio_pdrv_genirq.c index aa53db9f2e88..1ef3b8fc50b3 100644 --- a/drivers/uio/uio_pdrv_genirq.c +++ b/drivers/uio/uio_pdrv_genirq.c @@ -210,7 +210,7 @@ static int uio_pdrv_genirq_runtime_nop(struct device *dev) return 0; } -static struct dev_pm_ops uio_pdrv_genirq_dev_pm_ops = { +static const struct dev_pm_ops uio_pdrv_genirq_dev_pm_ops = { .runtime_suspend = uio_pdrv_genirq_runtime_nop, .runtime_resume = uio_pdrv_genirq_runtime_nop, }; diff --git a/drivers/usb/core/hcd-pci.c b/drivers/usb/core/hcd-pci.c index 91f2885b6ee1..2dcf906df569 100644 --- a/drivers/usb/core/hcd-pci.c +++ b/drivers/usb/core/hcd-pci.c @@ -363,7 +363,7 @@ static int hcd_pci_restore(struct device *dev) return resume_common(dev, true); } -struct dev_pm_ops usb_hcd_pci_pm_ops = { +const struct dev_pm_ops usb_hcd_pci_pm_ops = { .suspend = hcd_pci_suspend, .suspend_noirq = hcd_pci_suspend_noirq, .resume_noirq = hcd_pci_resume_noirq, diff --git a/drivers/usb/core/hcd.h b/drivers/usb/core/hcd.h index d8b43aee581e..bbe2b924aae8 100644 --- a/drivers/usb/core/hcd.h +++ b/drivers/usb/core/hcd.h @@ -330,7 +330,7 @@ extern void usb_hcd_pci_remove(struct pci_dev *dev); extern void usb_hcd_pci_shutdown(struct pci_dev *dev); #ifdef CONFIG_PM_SLEEP -extern struct dev_pm_ops usb_hcd_pci_pm_ops; +extern const struct dev_pm_ops usb_hcd_pci_pm_ops; #endif #endif /* CONFIG_PCI */ diff --git a/drivers/usb/core/usb.c b/drivers/usb/core/usb.c index 4e2c6df8d3cc..043fa833eeca 100644 --- a/drivers/usb/core/usb.c +++ b/drivers/usb/core/usb.c @@ -320,7 +320,7 @@ static int usb_dev_restore(struct device *dev) return usb_resume(dev, PMSG_RESTORE); } -static struct dev_pm_ops usb_device_pm_ops = { +static const struct dev_pm_ops usb_device_pm_ops = { .prepare = usb_dev_prepare, .complete = usb_dev_complete, .suspend = usb_dev_suspend, diff --git a/drivers/usb/host/ehci-au1xxx.c b/drivers/usb/host/ehci-au1xxx.c index ed77be76d6bb..dbfb482a94e3 100644 --- a/drivers/usb/host/ehci-au1xxx.c +++ b/drivers/usb/host/ehci-au1xxx.c @@ -297,7 +297,7 @@ static int ehci_hcd_au1xxx_drv_resume(struct device *dev) return 0; } -static struct dev_pm_ops au1xxx_ehci_pmops = { +static const struct dev_pm_ops au1xxx_ehci_pmops = { .suspend = ehci_hcd_au1xxx_drv_suspend, .resume = ehci_hcd_au1xxx_drv_resume, }; diff --git a/drivers/usb/host/ohci-au1xxx.c b/drivers/usb/host/ohci-au1xxx.c index e4380082ebb1..17a6043c1fa0 100644 --- a/drivers/usb/host/ohci-au1xxx.c +++ b/drivers/usb/host/ohci-au1xxx.c @@ -294,7 +294,7 @@ static int ohci_hcd_au1xxx_drv_resume(struct device *dev) return 0; } -static struct dev_pm_ops au1xxx_ohci_pmops = { +static const struct dev_pm_ops au1xxx_ohci_pmops = { .suspend = ohci_hcd_au1xxx_drv_suspend, .resume = ohci_hcd_au1xxx_drv_resume, }; diff --git a/drivers/usb/host/ohci-pxa27x.c b/drivers/usb/host/ohci-pxa27x.c index f1c06202fdf2..a18debdd79b8 100644 --- a/drivers/usb/host/ohci-pxa27x.c +++ b/drivers/usb/host/ohci-pxa27x.c @@ -518,7 +518,7 @@ static int ohci_hcd_pxa27x_drv_resume(struct device *dev) return 0; } -static struct dev_pm_ops ohci_hcd_pxa27x_pm_ops = { +static const struct dev_pm_ops ohci_hcd_pxa27x_pm_ops = { .suspend = ohci_hcd_pxa27x_drv_suspend, .resume = ohci_hcd_pxa27x_drv_resume, }; diff --git a/drivers/usb/host/r8a66597-hcd.c b/drivers/usb/host/r8a66597-hcd.c index 41dbc70ae752..b7a661c02bcd 100644 --- a/drivers/usb/host/r8a66597-hcd.c +++ b/drivers/usb/host/r8a66597-hcd.c @@ -2353,7 +2353,7 @@ static int r8a66597_resume(struct device *dev) return 0; } -static struct dev_pm_ops r8a66597_dev_pm_ops = { +static const struct dev_pm_ops r8a66597_dev_pm_ops = { .suspend = r8a66597_suspend, .resume = r8a66597_resume, .poweroff = r8a66597_suspend, diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c index 49f2346afad3..bfe08f4975a3 100644 --- a/drivers/usb/musb/musb_core.c +++ b/drivers/usb/musb/musb_core.c @@ -2214,7 +2214,7 @@ static int musb_resume_noirq(struct device *dev) return 0; } -static struct dev_pm_ops musb_dev_pm_ops = { +static const struct dev_pm_ops musb_dev_pm_ops = { .suspend = musb_suspend, .resume_noirq = musb_resume_noirq, }; diff --git a/drivers/video/backlight/da903x_bl.c b/drivers/video/backlight/da903x_bl.c index 7fcb0eb54c60..f2d76dae1eb3 100644 --- a/drivers/video/backlight/da903x_bl.c +++ b/drivers/video/backlight/da903x_bl.c @@ -177,7 +177,7 @@ static int da903x_backlight_resume(struct device *dev) return 0; } -static struct dev_pm_ops da903x_backlight_pm_ops = { +static const struct dev_pm_ops da903x_backlight_pm_ops = { .suspend = da903x_backlight_suspend, .resume = da903x_backlight_resume, }; diff --git a/drivers/video/hitfb.c b/drivers/video/hitfb.c index e7116a6d82d3..73c83a8de2d3 100644 --- a/drivers/video/hitfb.c +++ b/drivers/video/hitfb.c @@ -456,7 +456,7 @@ static int hitfb_resume(struct device *dev) return 0; } -static struct dev_pm_ops hitfb_dev_pm_ops = { +static const struct dev_pm_ops hitfb_dev_pm_ops = { .suspend = hitfb_suspend, .resume = hitfb_resume, }; diff --git a/drivers/video/pxafb.c b/drivers/video/pxafb.c index f58a3aae6ea6..b7e58059b592 100644 --- a/drivers/video/pxafb.c +++ b/drivers/video/pxafb.c @@ -1667,7 +1667,7 @@ static int pxafb_resume(struct device *dev) return 0; } -static struct dev_pm_ops pxafb_pm_ops = { +static const struct dev_pm_ops pxafb_pm_ops = { .suspend = pxafb_suspend, .resume = pxafb_resume, }; diff --git a/drivers/video/sh_mobile_lcdcfb.c b/drivers/video/sh_mobile_lcdcfb.c index b4b5de930cf5..8a65fb6648a6 100644 --- a/drivers/video/sh_mobile_lcdcfb.c +++ b/drivers/video/sh_mobile_lcdcfb.c @@ -890,7 +890,7 @@ static int sh_mobile_lcdc_runtime_resume(struct device *dev) return 0; } -static struct dev_pm_ops sh_mobile_lcdc_dev_pm_ops = { +static const struct dev_pm_ops sh_mobile_lcdc_dev_pm_ops = { .suspend = sh_mobile_lcdc_suspend, .resume = sh_mobile_lcdc_resume, .runtime_suspend = sh_mobile_lcdc_runtime_suspend, diff --git a/drivers/watchdog/adx_wdt.c b/drivers/watchdog/adx_wdt.c index 77afb0acc500..9c6594473d3b 100644 --- a/drivers/watchdog/adx_wdt.c +++ b/drivers/watchdog/adx_wdt.c @@ -314,7 +314,7 @@ static int adx_wdt_resume(struct device *dev) return 0; } -static struct dev_pm_ops adx_wdt_pm_ops = { +static const struct dev_pm_ops adx_wdt_pm_ops = { .suspend = adx_wdt_suspend, .resume = adx_wdt_resume, }; diff --git a/include/linux/pm.h b/include/linux/pm.h index 0d65934246af..198b8f9fe05e 100644 --- a/include/linux/pm.h +++ b/include/linux/pm.h @@ -219,7 +219,7 @@ struct dev_pm_ops { * to RAM and hibernation. */ #define SIMPLE_DEV_PM_OPS(name, suspend_fn, resume_fn) \ -struct dev_pm_ops name = { \ +const struct dev_pm_ops name = { \ .suspend = suspend_fn, \ .resume = resume_fn, \ .freeze = suspend_fn, \ diff --git a/net/iucv/af_iucv.c b/net/iucv/af_iucv.c index 1e428863574f..c18286a2167b 100644 --- a/net/iucv/af_iucv.c +++ b/net/iucv/af_iucv.c @@ -221,7 +221,7 @@ static int afiucv_pm_restore_thaw(struct device *dev) return 0; } -static struct dev_pm_ops afiucv_pm_ops = { +static const struct dev_pm_ops afiucv_pm_ops = { .prepare = afiucv_pm_prepare, .complete = afiucv_pm_complete, .freeze = afiucv_pm_freeze, diff --git a/net/iucv/iucv.c b/net/iucv/iucv.c index 3b1f5f5f8de7..fd8b28361a64 100644 --- a/net/iucv/iucv.c +++ b/net/iucv/iucv.c @@ -93,7 +93,7 @@ static int iucv_pm_freeze(struct device *); static int iucv_pm_thaw(struct device *); static int iucv_pm_restore(struct device *); -static struct dev_pm_ops iucv_pm_ops = { +static const struct dev_pm_ops iucv_pm_ops = { .prepare = iucv_pm_prepare, .complete = iucv_pm_complete, .freeze = iucv_pm_freeze, diff --git a/sound/arm/pxa2xx-ac97.c b/sound/arm/pxa2xx-ac97.c index b4b48afb6de6..5d9411839cd7 100644 --- a/sound/arm/pxa2xx-ac97.c +++ b/sound/arm/pxa2xx-ac97.c @@ -159,7 +159,7 @@ static int pxa2xx_ac97_resume(struct device *dev) return ret; } -static struct dev_pm_ops pxa2xx_ac97_pm_ops = { +static const struct dev_pm_ops pxa2xx_ac97_pm_ops = { .suspend = pxa2xx_ac97_suspend, .resume = pxa2xx_ac97_resume, }; diff --git a/sound/soc/s3c24xx/s3c24xx_simtec.c b/sound/soc/s3c24xx/s3c24xx_simtec.c index d441c3b64631..4984754f3298 100644 --- a/sound/soc/s3c24xx/s3c24xx_simtec.c +++ b/sound/soc/s3c24xx/s3c24xx_simtec.c @@ -312,7 +312,7 @@ int simtec_audio_resume(struct device *dev) return 0; } -struct dev_pm_ops simtec_audio_pmops = { +const struct dev_pm_ops simtec_audio_pmops = { .resume = simtec_audio_resume, }; EXPORT_SYMBOL_GPL(simtec_audio_pmops); diff --git a/sound/soc/s3c24xx/s3c24xx_simtec.h b/sound/soc/s3c24xx/s3c24xx_simtec.h index 2714203af161..e18faee30cce 100644 --- a/sound/soc/s3c24xx/s3c24xx_simtec.h +++ b/sound/soc/s3c24xx/s3c24xx_simtec.h @@ -15,7 +15,7 @@ extern int simtec_audio_core_probe(struct platform_device *pdev, extern int simtec_audio_remove(struct platform_device *pdev); #ifdef CONFIG_PM -extern struct dev_pm_ops simtec_audio_pmops; +extern const struct dev_pm_ops simtec_audio_pmops; #define simtec_audio_pm &simtec_audio_pmops #else #define simtec_audio_pm NULL diff --git a/sound/soc/soc-core.c b/sound/soc/soc-core.c index ef8f28284cb9..0a6440c6f54a 100644 --- a/sound/soc/soc-core.c +++ b/sound/soc/soc-core.c @@ -1236,7 +1236,7 @@ static int soc_poweroff(struct device *dev) return 0; } -static struct dev_pm_ops soc_pm_ops = { +static const struct dev_pm_ops soc_pm_ops = { .suspend = soc_suspend, .resume = soc_resume, .poweroff = soc_poweroff, -- cgit v1.2.3 From 3c55494670745e523f69b56edb66ca0b50a470c2 Mon Sep 17 00:00:00 2001 From: Andres Salomon Date: Mon, 14 Dec 2009 18:00:36 -0800 Subject: ALSA: cs5535audio: free OLPC quirks from reliance on MGEODE_LX cpu optimization Previously, OLPC support for the mic extensions was only enabled in the ALSA driver if CONFIG_OLPC and CONFIG_MGEODE_LX were both set. This was because the old geode GPIO code was written in a manner that assumed CONFIG_MGEODE_LX. With the new cs553x-gpio driver, this is no longer the case; as such, we can drop the requirement on CONFIG_MGEODE_LX and instead include a requirement on GPIOLIB. We use the generic GPIO API rather than the cs553x-specific API. Signed-off-by: Andres Salomon Cc: Takashi Iwai Cc: Jordan Crouse Cc: David Brownell Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/x86/Kconfig | 1 + arch/x86/include/asm/olpc.h | 2 +- sound/pci/cs5535audio/Makefile | 2 -- sound/pci/cs5535audio/cs5535audio.c | 1 + sound/pci/cs5535audio/cs5535audio.h | 4 +++- sound/pci/cs5535audio/cs5535audio_olpc.c | 26 +++++++++++++++++++------- 6 files changed, 25 insertions(+), 11 deletions(-) (limited to 'sound') diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index 32a1918e1b88..6ad0985e8d76 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -2024,6 +2024,7 @@ config GEODE_MFGPT_TIMER config OLPC bool "One Laptop Per Child support" + select GPIOLIB default n ---help--- Add support for detecting the unique features of the OLPC diff --git a/arch/x86/include/asm/olpc.h b/arch/x86/include/asm/olpc.h index 834a30295fab..3a57385d9fa7 100644 --- a/arch/x86/include/asm/olpc.h +++ b/arch/x86/include/asm/olpc.h @@ -120,7 +120,7 @@ extern int olpc_ec_mask_unset(uint8_t bits); /* GPIO assignments */ -#define OLPC_GPIO_MIC_AC geode_gpio(1) +#define OLPC_GPIO_MIC_AC 1 #define OLPC_GPIO_DCON_IRQ geode_gpio(7) #define OLPC_GPIO_THRM_ALRM geode_gpio(10) #define OLPC_GPIO_SMB_CLK geode_gpio(14) diff --git a/sound/pci/cs5535audio/Makefile b/sound/pci/cs5535audio/Makefile index fda7a94c992f..ccc642269b9e 100644 --- a/sound/pci/cs5535audio/Makefile +++ b/sound/pci/cs5535audio/Makefile @@ -4,9 +4,7 @@ snd-cs5535audio-y := cs5535audio.o cs5535audio_pcm.o snd-cs5535audio-$(CONFIG_PM) += cs5535audio_pm.o -ifdef CONFIG_MGEODE_LX snd-cs5535audio-$(CONFIG_OLPC) += cs5535audio_olpc.o -endif # Toplevel Module Dependency obj-$(CONFIG_SND_CS5535AUDIO) += snd-cs5535audio.o diff --git a/sound/pci/cs5535audio/cs5535audio.c b/sound/pci/cs5535audio/cs5535audio.c index 05f56e04849b..91e7faf69bbb 100644 --- a/sound/pci/cs5535audio/cs5535audio.c +++ b/sound/pci/cs5535audio/cs5535audio.c @@ -389,6 +389,7 @@ probefail_out: static void __devexit snd_cs5535audio_remove(struct pci_dev *pci) { + olpc_quirks_cleanup(); snd_card_free(pci_get_drvdata(pci)); pci_set_drvdata(pci, NULL); } diff --git a/sound/pci/cs5535audio/cs5535audio.h b/sound/pci/cs5535audio/cs5535audio.h index 7a298ac662e3..51966d782a3c 100644 --- a/sound/pci/cs5535audio/cs5535audio.h +++ b/sound/pci/cs5535audio/cs5535audio.h @@ -99,10 +99,11 @@ int snd_cs5535audio_suspend(struct pci_dev *pci, pm_message_t state); int snd_cs5535audio_resume(struct pci_dev *pci); #endif -#if defined(CONFIG_OLPC) && defined(CONFIG_MGEODE_LX) +#ifdef CONFIG_OLPC void __devinit olpc_prequirks(struct snd_card *card, struct snd_ac97_template *ac97); int __devinit olpc_quirks(struct snd_card *card, struct snd_ac97 *ac97); +void __devexit olpc_quirks_cleanup(void); void olpc_analog_input(struct snd_ac97 *ac97, int on); void olpc_mic_bias(struct snd_ac97 *ac97, int on); @@ -128,6 +129,7 @@ static inline int olpc_quirks(struct snd_card *card, struct snd_ac97 *ac97) { return 0; } +static inline void olpc_quirks_cleanup(void) { } static inline void olpc_analog_input(struct snd_ac97 *ac97, int on) { } static inline void olpc_mic_bias(struct snd_ac97 *ac97, int on) { } static inline void olpc_capture_open(struct snd_ac97 *ac97) { } diff --git a/sound/pci/cs5535audio/cs5535audio_olpc.c b/sound/pci/cs5535audio/cs5535audio_olpc.c index 5c6814335cd7..50da49be9ae5 100644 --- a/sound/pci/cs5535audio/cs5535audio_olpc.c +++ b/sound/pci/cs5535audio/cs5535audio_olpc.c @@ -13,10 +13,13 @@ #include #include #include +#include #include #include "cs5535audio.h" +#define DRV_NAME "cs5535audio-olpc" + /* * OLPC has an additional feature on top of the regular AD1888 codec features. * It has an Analog Input mode that is switched into (after disabling the @@ -38,10 +41,7 @@ void olpc_analog_input(struct snd_ac97 *ac97, int on) } /* set Analog Input through GPIO */ - if (on) - geode_gpio_set(OLPC_GPIO_MIC_AC, GPIO_OUTPUT_VAL); - else - geode_gpio_clear(OLPC_GPIO_MIC_AC, GPIO_OUTPUT_VAL); + gpio_set_value(OLPC_GPIO_MIC_AC, on); } /* @@ -73,8 +73,7 @@ static int olpc_dc_info(struct snd_kcontrol *kctl, static int olpc_dc_get(struct snd_kcontrol *kctl, struct snd_ctl_elem_value *v) { - v->value.integer.value[0] = geode_gpio_isset(OLPC_GPIO_MIC_AC, - GPIO_OUTPUT_VAL); + v->value.integer.value[0] = gpio_get_value(OLPC_GPIO_MIC_AC); return 0; } @@ -153,6 +152,12 @@ int __devinit olpc_quirks(struct snd_card *card, struct snd_ac97 *ac97) if (!machine_is_olpc()) return 0; + if (gpio_request(OLPC_GPIO_MIC_AC, DRV_NAME)) { + printk(KERN_ERR DRV_NAME ": unable to allocate MIC GPIO\n"); + return -EIO; + } + gpio_direction_output(OLPC_GPIO_MIC_AC, 0); + /* drop the original AD1888 HPF control */ memset(&elem, 0, sizeof(elem)); elem.iface = SNDRV_CTL_ELEM_IFACE_MIXER; @@ -169,11 +174,18 @@ int __devinit olpc_quirks(struct snd_card *card, struct snd_ac97 *ac97) for (i = 0; i < ARRAY_SIZE(olpc_cs5535audio_ctls); i++) { err = snd_ctl_add(card, snd_ctl_new1(&olpc_cs5535audio_ctls[i], ac97->private_data)); - if (err < 0) + if (err < 0) { + gpio_free(OLPC_GPIO_MIC_AC); return err; + } } /* turn off the mic by default */ olpc_mic_bias(ac97, 0); return 0; } + +void __devexit olpc_quirks_cleanup(void) +{ + gpio_free(OLPC_GPIO_MIC_AC); +} -- cgit v1.2.3 From e7d2860b690d4f3bed6824757c540579638e3d1e Mon Sep 17 00:00:00 2001 From: André Goddard Rosa Date: Mon, 14 Dec 2009 18:01:06 -0800 Subject: tree-wide: convert open calls to remove spaces to skip_spaces() lib function MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Makes use of skip_spaces() defined in lib/string.c for removing leading spaces from strings all over the tree. It decreases lib.a code size by 47 bytes and reuses the function tree-wide: text data bss dec hex filename 64688 584 592 65864 10148 (TOTALS-BEFORE) 64641 584 592 65817 10119 (TOTALS-AFTER) Also, while at it, if we see (*str && isspace(*str)), we can be sure to remove the first condition (*str) as the second one (isspace(*str)) also evaluates to 0 whenever *str == 0, making it redundant. In other words, "a char equals zero is never a space". Julia Lawall tried the semantic patch (http://coccinelle.lip6.fr) below, and found occurrences of this pattern on 3 more files: drivers/leds/led-class.c drivers/leds/ledtrig-timer.c drivers/video/output.c @@ expression str; @@ ( // ignore skip_spaces cases while (*str && isspace(*str)) { \(str++;\|++str;\) } | - *str && isspace(*str) ) Signed-off-by: André Goddard Rosa Cc: Julia Lawall Cc: Martin Schwidefsky Cc: Jeff Dike Cc: Ingo Molnar Cc: Thomas Gleixner Cc: "H. Peter Anvin" Cc: Richard Purdie Cc: Neil Brown Cc: Kyle McMartin Cc: Henrique de Moraes Holschuh Cc: David Howells Cc: Cc: Samuel Ortiz Cc: Patrick McHardy Cc: Takashi Iwai Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/s390/kernel/debug.c | 3 ++- arch/um/drivers/mconsole_kern.c | 16 +++++++--------- arch/x86/kernel/cpu/mtrr/if.c | 11 ++++------- drivers/leds/led-class.c | 2 +- drivers/leds/ledtrig-timer.c | 4 ++-- drivers/md/dm-table.c | 6 ++---- drivers/md/md.c | 4 ++-- drivers/parisc/pdc_stable.c | 9 +++------ drivers/platform/x86/thinkpad_acpi.c | 7 ++----- drivers/pnp/interface.c | 36 ++++++++++------------------------- drivers/s390/block/dasd_proc.c | 5 +++-- drivers/video/backlight/lcd.c | 4 ++-- drivers/video/display/display-sysfs.c | 2 +- drivers/video/output.c | 2 +- fs/cachefiles/daemon.c | 4 ++-- fs/ext4/super.c | 7 ++----- kernel/params.c | 8 +++----- lib/argv_split.c | 13 +++---------- lib/dynamic_debug.c | 4 ++-- lib/vsprintf.c | 15 ++++----------- net/irda/irnet/irnet.h | 1 + net/irda/irnet/irnet_ppp.c | 8 +++----- net/netfilter/xt_recent.c | 3 +-- sound/pci/hda/hda_hwdep.c | 7 +++---- 24 files changed, 66 insertions(+), 115 deletions(-) (limited to 'sound') diff --git a/arch/s390/kernel/debug.c b/arch/s390/kernel/debug.c index 071c81f179ef..0168472b2fdf 100644 --- a/arch/s390/kernel/debug.c +++ b/arch/s390/kernel/debug.c @@ -18,6 +18,7 @@ #include #include #include +#include #include #include #include @@ -1178,7 +1179,7 @@ debug_get_uint(char *buf) { int rc; - for(; isspace(*buf); buf++); + buf = skip_spaces(buf); rc = simple_strtoul(buf, &buf, 10); if(*buf){ rc = -EINVAL; diff --git a/arch/um/drivers/mconsole_kern.c b/arch/um/drivers/mconsole_kern.c index f0fa47f10e6c..51069245b79a 100644 --- a/arch/um/drivers/mconsole_kern.c +++ b/arch/um/drivers/mconsole_kern.c @@ -6,6 +6,7 @@ #include #include +#include #include #include #include @@ -131,7 +132,7 @@ void mconsole_proc(struct mc_request *req) char *ptr = req->request.data, *buf; ptr += strlen("proc"); - while (isspace(*ptr)) ptr++; + ptr = skip_spaces(ptr); proc = get_fs_type("proc"); if (proc == NULL) { @@ -212,8 +213,7 @@ void mconsole_proc(struct mc_request *req) char *ptr = req->request.data; ptr += strlen("proc"); - while (isspace(*ptr)) - ptr++; + ptr = skip_spaces(ptr); snprintf(path, sizeof(path), "/proc/%s", ptr); fd = sys_open(path, 0, 0); @@ -560,8 +560,7 @@ void mconsole_config(struct mc_request *req) int err; ptr += strlen("config"); - while (isspace(*ptr)) - ptr++; + ptr = skip_spaces(ptr); dev = mconsole_find_dev(ptr); if (dev == NULL) { mconsole_reply(req, "Bad configuration option", 1, 0); @@ -588,7 +587,7 @@ void mconsole_remove(struct mc_request *req) int err, start, end, n; ptr += strlen("remove"); - while (isspace(*ptr)) ptr++; + ptr = skip_spaces(ptr); dev = mconsole_find_dev(ptr); if (dev == NULL) { mconsole_reply(req, "Bad remove option", 1, 0); @@ -712,7 +711,7 @@ void mconsole_sysrq(struct mc_request *req) char *ptr = req->request.data; ptr += strlen("sysrq"); - while (isspace(*ptr)) ptr++; + ptr = skip_spaces(ptr); /* * With 'b', the system will shut down without a chance to reply, @@ -757,8 +756,7 @@ void mconsole_stack(struct mc_request *req) */ ptr += strlen("stack"); - while (isspace(*ptr)) - ptr++; + ptr = skip_spaces(ptr); /* * Should really check for multiple pids or reject bad args here diff --git a/arch/x86/kernel/cpu/mtrr/if.c b/arch/x86/kernel/cpu/mtrr/if.c index 3c1b12d461d1..e006e56f699c 100644 --- a/arch/x86/kernel/cpu/mtrr/if.c +++ b/arch/x86/kernel/cpu/mtrr/if.c @@ -4,6 +4,7 @@ #include #include #include +#include #include #define LINE_SIZE 80 @@ -133,8 +134,7 @@ mtrr_write(struct file *file, const char __user *buf, size_t len, loff_t * ppos) return -EINVAL; base = simple_strtoull(line + 5, &ptr, 0); - while (isspace(*ptr)) - ptr++; + ptr = skip_spaces(ptr); if (strncmp(ptr, "size=", 5)) return -EINVAL; @@ -142,14 +142,11 @@ mtrr_write(struct file *file, const char __user *buf, size_t len, loff_t * ppos) size = simple_strtoull(ptr + 5, &ptr, 0); if ((base & 0xfff) || (size & 0xfff)) return -EINVAL; - while (isspace(*ptr)) - ptr++; + ptr = skip_spaces(ptr); if (strncmp(ptr, "type=", 5)) return -EINVAL; - ptr += 5; - while (isspace(*ptr)) - ptr++; + ptr = skip_spaces(ptr + 5); for (i = 0; i < MTRR_NUM_TYPES; ++i) { if (strcmp(ptr, mtrr_strings[i])) diff --git a/drivers/leds/led-class.c b/drivers/leds/led-class.c index f2cc13d76810..782f95822eab 100644 --- a/drivers/leds/led-class.c +++ b/drivers/leds/led-class.c @@ -50,7 +50,7 @@ static ssize_t led_brightness_store(struct device *dev, unsigned long state = simple_strtoul(buf, &after, 10); size_t count = after - buf; - if (*after && isspace(*after)) + if (isspace(*after)) count++; if (count == size) { diff --git a/drivers/leds/ledtrig-timer.c b/drivers/leds/ledtrig-timer.c index 3b83406de752..38b3378be442 100644 --- a/drivers/leds/ledtrig-timer.c +++ b/drivers/leds/ledtrig-timer.c @@ -83,7 +83,7 @@ static ssize_t led_delay_on_store(struct device *dev, unsigned long state = simple_strtoul(buf, &after, 10); size_t count = after - buf; - if (*after && isspace(*after)) + if (isspace(*after)) count++; if (count == size) { @@ -127,7 +127,7 @@ static ssize_t led_delay_off_store(struct device *dev, unsigned long state = simple_strtoul(buf, &after, 10); size_t count = after - buf; - if (*after && isspace(*after)) + if (isspace(*after)) count++; if (count == size) { diff --git a/drivers/md/dm-table.c b/drivers/md/dm-table.c index 1a6cb3c7822e..91976e8fae5f 100644 --- a/drivers/md/dm-table.c +++ b/drivers/md/dm-table.c @@ -12,6 +12,7 @@ #include #include #include +#include #include #include #include @@ -600,11 +601,8 @@ int dm_split_args(int *argc, char ***argvp, char *input) return -ENOMEM; while (1) { - start = end; - /* Skip whitespace */ - while (*start && isspace(*start)) - start++; + start = skip_spaces(end); if (!*start) break; /* success, we hit the end */ diff --git a/drivers/md/md.c b/drivers/md/md.c index e1f3c1715cca..6f9148623a4d 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -39,6 +39,7 @@ #include /* for invalidate_bdev */ #include #include +#include #include #include #include @@ -3439,8 +3440,7 @@ bitmap_store(mddev_t *mddev, const char *buf, size_t len) } if (*end && !isspace(*end)) break; bitmap_dirty_bits(mddev->bitmap, chunk, end_chunk); - buf = end; - while (isspace(*buf)) buf++; + buf = skip_spaces(end); } bitmap_unplug(mddev->bitmap); /* flush the bits to disk */ out: diff --git a/drivers/parisc/pdc_stable.c b/drivers/parisc/pdc_stable.c index 13a64bc081b6..0bc5d474b168 100644 --- a/drivers/parisc/pdc_stable.c +++ b/drivers/parisc/pdc_stable.c @@ -779,12 +779,9 @@ static ssize_t pdcs_auto_write(struct kobject *kobj, read_unlock(&pathentry->rw_lock); DPRINTK("%s: flags before: 0x%X\n", __func__, flags); - - temp = in; - - while (*temp && isspace(*temp)) - temp++; - + + temp = skip_spaces(in); + c = *temp++ - '0'; if ((c != 0) && (c != 1)) goto parse_error; diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c index 0ed84806f8ae..cf61d6a8ef6f 100644 --- a/drivers/platform/x86/thinkpad_acpi.c +++ b/drivers/platform/x86/thinkpad_acpi.c @@ -1006,11 +1006,8 @@ static int parse_strtoul(const char *buf, { char *endp; - while (*buf && isspace(*buf)) - buf++; - *value = simple_strtoul(buf, &endp, 0); - while (*endp && isspace(*endp)) - endp++; + *value = simple_strtoul(skip_spaces(buf), &endp, 0); + endp = skip_spaces(endp); if (*endp || *value > max) return -EINVAL; diff --git a/drivers/pnp/interface.c b/drivers/pnp/interface.c index c3f1c8e9d254..68b0c04987e4 100644 --- a/drivers/pnp/interface.c +++ b/drivers/pnp/interface.c @@ -310,8 +310,7 @@ static ssize_t pnp_set_current_resources(struct device *dmdev, goto done; } - while (isspace(*buf)) - ++buf; + buf = skip_spaces(buf); if (!strnicmp(buf, "disable", 7)) { retval = pnp_disable_dev(dev); goto done; @@ -353,19 +352,13 @@ static ssize_t pnp_set_current_resources(struct device *dmdev, pnp_init_resources(dev); mutex_lock(&pnp_res_mutex); while (1) { - while (isspace(*buf)) - ++buf; + buf = skip_spaces(buf); if (!strnicmp(buf, "io", 2)) { - buf += 2; - while (isspace(*buf)) - ++buf; + buf = skip_spaces(buf + 2); start = simple_strtoul(buf, &buf, 0); - while (isspace(*buf)) - ++buf; + buf = skip_spaces(buf); if (*buf == '-') { - buf += 1; - while (isspace(*buf)) - ++buf; + buf = skip_spaces(buf + 1); end = simple_strtoul(buf, &buf, 0); } else end = start; @@ -373,16 +366,11 @@ static ssize_t pnp_set_current_resources(struct device *dmdev, continue; } if (!strnicmp(buf, "mem", 3)) { - buf += 3; - while (isspace(*buf)) - ++buf; + buf = skip_spaces(buf + 3); start = simple_strtoul(buf, &buf, 0); - while (isspace(*buf)) - ++buf; + buf = skip_spaces(buf); if (*buf == '-') { - buf += 1; - while (isspace(*buf)) - ++buf; + buf = skip_spaces(buf + 1); end = simple_strtoul(buf, &buf, 0); } else end = start; @@ -390,17 +378,13 @@ static ssize_t pnp_set_current_resources(struct device *dmdev, continue; } if (!strnicmp(buf, "irq", 3)) { - buf += 3; - while (isspace(*buf)) - ++buf; + buf = skip_spaces(buf + 3); start = simple_strtoul(buf, &buf, 0); pnp_add_irq_resource(dev, start, 0); continue; } if (!strnicmp(buf, "dma", 3)) { - buf += 3; - while (isspace(*buf)) - ++buf; + buf = skip_spaces(buf + 3); start = simple_strtoul(buf, &buf, 0); pnp_add_dma_resource(dev, start, 0); continue; diff --git a/drivers/s390/block/dasd_proc.c b/drivers/s390/block/dasd_proc.c index 5f23eca82804..6315fbd8e68b 100644 --- a/drivers/s390/block/dasd_proc.c +++ b/drivers/s390/block/dasd_proc.c @@ -14,6 +14,7 @@ #define KMSG_COMPONENT "dasd" #include +#include #include #include #include @@ -272,10 +273,10 @@ dasd_statistics_write(struct file *file, const char __user *user_buf, DBF_EVENT(DBF_DEBUG, "/proc/dasd/statictics: '%s'\n", buffer); /* check for valid verbs */ - for (str = buffer; isspace(*str); str++); + str = skip_spaces(buffer); if (strncmp(str, "set", 3) == 0 && isspace(str[3])) { /* 'set xxx' was given */ - for (str = str + 4; isspace(*str); str++); + str = skip_spaces(str + 4); if (strcmp(str, "on") == 0) { /* switch on statistics profiling */ dasd_profile_level = DASD_PROFILE_ON; diff --git a/drivers/video/backlight/lcd.c b/drivers/video/backlight/lcd.c index a482dd7b0311..9b3be74cee5a 100644 --- a/drivers/video/backlight/lcd.c +++ b/drivers/video/backlight/lcd.c @@ -101,7 +101,7 @@ static ssize_t lcd_store_power(struct device *dev, int power = simple_strtoul(buf, &endp, 0); size_t size = endp - buf; - if (*endp && isspace(*endp)) + if (isspace(*endp)) size++; if (size != count) return -EINVAL; @@ -140,7 +140,7 @@ static ssize_t lcd_store_contrast(struct device *dev, int contrast = simple_strtoul(buf, &endp, 0); size_t size = endp - buf; - if (*endp && isspace(*endp)) + if (isspace(*endp)) size++; if (size != count) return -EINVAL; diff --git a/drivers/video/display/display-sysfs.c b/drivers/video/display/display-sysfs.c index 4830b1bf51e5..80abbf323b99 100644 --- a/drivers/video/display/display-sysfs.c +++ b/drivers/video/display/display-sysfs.c @@ -67,7 +67,7 @@ static ssize_t display_store_contrast(struct device *dev, contrast = simple_strtoul(buf, &endp, 0); size = endp - buf; - if (*endp && isspace(*endp)) + if (isspace(*endp)) size++; if (size != count) diff --git a/drivers/video/output.c b/drivers/video/output.c index 5e6439ae7394..5137aa016b83 100644 --- a/drivers/video/output.c +++ b/drivers/video/output.c @@ -50,7 +50,7 @@ static ssize_t video_output_store_state(struct device *dev, int request_state = simple_strtoul(buf,&endp,0); size_t size = endp - buf; - if (*endp && isspace(*endp)) + if (isspace(*endp)) size++; if (size != count) return -EINVAL; diff --git a/fs/cachefiles/daemon.c b/fs/cachefiles/daemon.c index 4618516dd994..c2413561ea75 100644 --- a/fs/cachefiles/daemon.c +++ b/fs/cachefiles/daemon.c @@ -21,6 +21,7 @@ #include #include #include +#include #include #include "internal.h" @@ -257,8 +258,7 @@ static ssize_t cachefiles_daemon_write(struct file *file, if (args == data) goto error; *args = '\0'; - for (args++; isspace(*args); args++) - continue; + args = skip_spaces(++args); } /* run the appropriate command handler */ diff --git a/fs/ext4/super.c b/fs/ext4/super.c index 768c111a77ec..827bde1f2594 100644 --- a/fs/ext4/super.c +++ b/fs/ext4/super.c @@ -2137,11 +2137,8 @@ static int parse_strtoul(const char *buf, { char *endp; - while (*buf && isspace(*buf)) - buf++; - *value = simple_strtoul(buf, &endp, 0); - while (*endp && isspace(*endp)) - endp++; + *value = simple_strtoul(skip_spaces(buf), &endp, 0); + endp = skip_spaces(endp); if (*endp || *value > max) return -EINVAL; diff --git a/kernel/params.c b/kernel/params.c index d656c276508d..cf1b69183127 100644 --- a/kernel/params.c +++ b/kernel/params.c @@ -24,6 +24,7 @@ #include #include #include +#include #if 0 #define DEBUGP printk @@ -122,9 +123,7 @@ static char *next_arg(char *args, char **param, char **val) next = args + i; /* Chew up trailing spaces. */ - while (isspace(*next)) - next++; - return next; + return skip_spaces(next); } /* Args looks like "foo=bar,bar2 baz=fuz wiz". */ @@ -139,8 +138,7 @@ int parse_args(const char *name, DEBUGP("Parsing ARGS: %s\n", args); /* Chew leading spaces */ - while (isspace(*args)) - args++; + args = skip_spaces(args); while (*args) { int ret; diff --git a/lib/argv_split.c b/lib/argv_split.c index 5205a8dae5bc..4b1b083f219c 100644 --- a/lib/argv_split.c +++ b/lib/argv_split.c @@ -4,17 +4,10 @@ #include #include +#include #include #include -static const char *skip_sep(const char *cp) -{ - while (*cp && isspace(*cp)) - cp++; - - return cp; -} - static const char *skip_arg(const char *cp) { while (*cp && !isspace(*cp)) @@ -28,7 +21,7 @@ static int count_argc(const char *str) int count = 0; while (*str) { - str = skip_sep(str); + str = skip_spaces(str); if (*str) { count++; str = skip_arg(str); @@ -82,7 +75,7 @@ char **argv_split(gfp_t gfp, const char *str, int *argcp) argvp = argv; while (*str) { - str = skip_sep(str); + str = skip_spaces(str); if (*str) { const char *p = str; diff --git a/lib/dynamic_debug.c b/lib/dynamic_debug.c index e22c148e4b7f..f93502915988 100644 --- a/lib/dynamic_debug.c +++ b/lib/dynamic_debug.c @@ -21,6 +21,7 @@ #include #include #include +#include #include #include #include @@ -209,8 +210,7 @@ static int ddebug_tokenize(char *buf, char *words[], int maxwords) char *end; /* Skip leading whitespace */ - while (*buf && isspace(*buf)) - buf++; + buf = skip_spaces(buf); if (!*buf) break; /* oh, it was trailing whitespace */ diff --git a/lib/vsprintf.c b/lib/vsprintf.c index c50733a690f0..7857d4dd62d3 100644 --- a/lib/vsprintf.c +++ b/lib/vsprintf.c @@ -1766,13 +1766,6 @@ EXPORT_SYMBOL_GPL(bprintf); #endif /* CONFIG_BINARY_PRINTF */ -static noinline char *skip_space(const char *str) -{ - while (isspace(*str)) - ++str; - return (char *)str; -} - /** * vsscanf - Unformat a buffer into a list of arguments * @buf: input buffer @@ -1794,8 +1787,8 @@ int vsscanf(const char *buf, const char *fmt, va_list args) * white space, including none, in the input. */ if (isspace(*fmt)) { - fmt = skip_space(fmt); - str = skip_space(str); + fmt = skip_spaces(++fmt); + str = skip_spaces(str); } /* anything that is not a conversion must match exactly */ @@ -1865,7 +1858,7 @@ int vsscanf(const char *buf, const char *fmt, va_list args) if (field_width == -1) field_width = INT_MAX; /* first, skip leading white space in buffer */ - str = skip_space(str); + str = skip_spaces(str); /* now copy until next white space */ while (*str && !isspace(*str) && field_width--) @@ -1907,7 +1900,7 @@ int vsscanf(const char *buf, const char *fmt, va_list args) /* have some sort of integer conversion. * first, skip white space in buffer. */ - str = skip_space(str); + str = skip_spaces(str); digit = *str; if (is_sign && digit == '-') diff --git a/net/irda/irnet/irnet.h b/net/irda/irnet/irnet.h index b001c361ad30..4300df35d37d 100644 --- a/net/irda/irnet/irnet.h +++ b/net/irda/irnet/irnet.h @@ -249,6 +249,7 @@ #include #include #include /* isspace() */ +#include /* skip_spaces() */ #include #include diff --git a/net/irda/irnet/irnet_ppp.c b/net/irda/irnet/irnet_ppp.c index 7dea882dbb75..156020d138b5 100644 --- a/net/irda/irnet/irnet_ppp.c +++ b/net/irda/irnet/irnet_ppp.c @@ -76,9 +76,8 @@ irnet_ctrl_write(irnet_socket * ap, /* Look at the next command */ start = next; - /* Scrap whitespaces before the command */ - while(isspace(*start)) - start++; + /* Scrap whitespaces before the command */ + start = skip_spaces(start); /* ',' is our command separator */ next = strchr(start, ','); @@ -133,8 +132,7 @@ irnet_ctrl_write(irnet_socket * ap, char * endp; /* Scrap whitespaces before the command */ - while(isspace(*begp)) - begp++; + begp = skip_spaces(begp); /* Convert argument to a number (last arg is the base) */ addr = simple_strtoul(begp, &endp, 16); diff --git a/net/netfilter/xt_recent.c b/net/netfilter/xt_recent.c index eb0ceb846527..fc70a49c0afd 100644 --- a/net/netfilter/xt_recent.c +++ b/net/netfilter/xt_recent.c @@ -482,8 +482,7 @@ static ssize_t recent_old_proc_write(struct file *file, if (copy_from_user(buf, input, size)) return -EFAULT; - while (isspace(*c)) - c++; + c = skip_spaces(c); if (size - (c - buf) < 5) return c - buf; diff --git a/sound/pci/hda/hda_hwdep.c b/sound/pci/hda/hda_hwdep.c index d24328661c6a..40ccb419b6e9 100644 --- a/sound/pci/hda/hda_hwdep.c +++ b/sound/pci/hda/hda_hwdep.c @@ -24,6 +24,7 @@ #include #include #include +#include #include #include #include "hda_codec.h" @@ -428,8 +429,7 @@ static int parse_hints(struct hda_codec *codec, const char *buf) char *key, *val; struct hda_hint *hint; - while (isspace(*buf)) - buf++; + buf = skip_spaces(buf); if (!*buf || *buf == '#' || *buf == '\n') return 0; if (*buf == '=') @@ -444,8 +444,7 @@ static int parse_hints(struct hda_codec *codec, const char *buf) return -EINVAL; } *val++ = 0; - while (isspace(*val)) - val++; + val = skip_spaces(val); remove_trail_spaces(key); remove_trail_spaces(val); hint = get_hint(codec, key); -- cgit v1.2.3 From 75b46c1321785c29cfbc4f839b6dc031428734ad Mon Sep 17 00:00:00 2001 From: Jon Smirl Date: Tue, 15 Dec 2009 20:53:44 -0500 Subject: ASoC: Fix disable of SPDIF on STAC9766 codec Change code so that switching to playing music through the analog output disables SPDIF out instead of disabling it when stream ends. Signed-off-by: Jon Smirl Acked-by: Mark Brown --- sound/soc/codecs/stac9766.c | 18 +----------------- 1 file changed, 1 insertion(+), 17 deletions(-) (limited to 'sound') diff --git a/sound/soc/codecs/stac9766.c b/sound/soc/codecs/stac9766.c index bbc72c2ddfca..81b8c9dfe7fc 100644 --- a/sound/soc/codecs/stac9766.c +++ b/sound/soc/codecs/stac9766.c @@ -191,6 +191,7 @@ static int ac97_analog_prepare(struct snd_pcm_substream *substream, vra = stac9766_ac97_read(codec, AC97_EXTENDED_STATUS); vra |= 0x1; /* enable variable rate audio */ + vra &= ~0x4; /* disable SPDIF output */ stac9766_ac97_write(codec, AC97_EXTENDED_STATUS, vra); @@ -221,22 +222,6 @@ static int ac97_digital_prepare(struct snd_pcm_substream *substream, return stac9766_ac97_write(codec, reg, runtime->rate); } -static int ac97_digital_trigger(struct snd_pcm_substream *substream, - int cmd, struct snd_soc_dai *dai) -{ - struct snd_soc_codec *codec = dai->codec; - unsigned short vra; - - switch (cmd) { - case SNDRV_PCM_TRIGGER_STOP: - vra = stac9766_ac97_read(codec, AC97_EXTENDED_STATUS); - vra &= !0x04; - stac9766_ac97_write(codec, AC97_EXTENDED_STATUS, vra); - break; - } - return 0; -} - static int stac9766_set_bias_level(struct snd_soc_codec *codec, enum snd_soc_bias_level level) { @@ -315,7 +300,6 @@ static struct snd_soc_dai_ops stac9766_dai_ops_analog = { static struct snd_soc_dai_ops stac9766_dai_ops_digital = { .prepare = ac97_digital_prepare, - .trigger = ac97_digital_trigger, }; struct snd_soc_dai stac9766_dai[] = { -- cgit v1.2.3 From ebeb53e1e1f11a51d8a93843a437f516e3528bfa Mon Sep 17 00:00:00 2001 From: Balaji T K Date: Tue, 15 Dec 2009 20:09:02 +0530 Subject: mfd: twl: fix twl4030 rename for remaining driver, board files Recent drivers/mfd/twl4030* renames to twl broke compile for various boards as the series was missing a patch to change the board-*.c files. This patch renames include twl4030.h to include twl.h and also renames twl4030_i2c_ routines. Signed-off-by: Balaji T K Acked-by: Mark Brown Reviewed-by: Felipe Balbi Cc: Samuel Ortiz Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/board-cm-t35.c | 2 +- arch/arm/mach-omap2/board-igep0020.c | 2 +- arch/arm/mach-omap2/board-omap3evm.c | 2 +- arch/arm/mach-omap2/board-omap3touchbook.c | 2 +- arch/arm/mach-omap2/board-rx51-peripherals.c | 2 +- arch/arm/mach-omap2/board-zoom-peripherals.c | 2 +- drivers/video/omap/lcd_ldp.c | 4 ++-- drivers/video/omap/lcd_omap2evm.c | 10 +++++----- drivers/video/omap/lcd_omap3beagle.c | 2 +- drivers/video/omap/lcd_omap3evm.c | 10 +++++----- drivers/video/omap/lcd_overo.c | 2 +- sound/soc/omap/sdp3430.c | 6 +++--- 12 files changed, 23 insertions(+), 23 deletions(-) (limited to 'sound') diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c index 1591aae64500..2626a9f8a73a 100644 --- a/arch/arm/mach-omap2/board-cm-t35.c +++ b/arch/arm/mach-omap2/board-cm-t35.c @@ -29,7 +29,7 @@ #include #include -#include +#include #include #include diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c index 44239e3ec02e..117b8fd7e3a6 100644 --- a/arch/arm/mach-omap2/board-igep0020.c +++ b/arch/arm/mach-omap2/board-igep0020.c @@ -19,7 +19,7 @@ #include #include -#include +#include #include #include diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c index 18913e96e34d..34de17851572 100644 --- a/arch/arm/mach-omap2/board-omap3evm.c +++ b/arch/arm/mach-omap2/board-omap3evm.c @@ -26,7 +26,7 @@ #include #include -#include +#include #include #include diff --git a/arch/arm/mach-omap2/board-omap3touchbook.c b/arch/arm/mach-omap2/board-omap3touchbook.c index c9e5ebb4d91d..fe3d22cb2457 100644 --- a/arch/arm/mach-omap2/board-omap3touchbook.c +++ b/arch/arm/mach-omap2/board-omap3touchbook.c @@ -34,7 +34,7 @@ #include #include -#include +#include #include #include diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c index 17f3c91231db..acafdbc8aa16 100644 --- a/arch/arm/mach-omap2/board-rx51-peripherals.c +++ b/arch/arm/mach-omap2/board-rx51-peripherals.c @@ -16,7 +16,7 @@ #include #include #include -#include +#include #include #include #include diff --git a/arch/arm/mach-omap2/board-zoom-peripherals.c b/arch/arm/mach-omap2/board-zoom-peripherals.c index 258794db488f..8dd277c36661 100755 --- a/arch/arm/mach-omap2/board-zoom-peripherals.c +++ b/arch/arm/mach-omap2/board-zoom-peripherals.c @@ -14,7 +14,7 @@ #include #include #include -#include +#include #include #include diff --git a/drivers/video/omap/lcd_ldp.c b/drivers/video/omap/lcd_ldp.c index 5bb7f6f14601..0f5952cae85e 100644 --- a/drivers/video/omap/lcd_ldp.c +++ b/drivers/video/omap/lcd_ldp.c @@ -24,7 +24,7 @@ #include #include #include -#include +#include #include #include @@ -59,7 +59,7 @@ #define TWL4030_VPLL2_DEV_GRP 0x33 #define TWL4030_VPLL2_DEDICATED 0x36 -#define t2_out(c, r, v) twl4030_i2c_write_u8(c, r, v) +#define t2_out(c, r, v) twl_i2c_write_u8(c, r, v) static int ldp_panel_init(struct lcd_panel *panel, diff --git a/drivers/video/omap/lcd_omap2evm.c b/drivers/video/omap/lcd_omap2evm.c index 006c2fe7360e..7e7a65c08452 100644 --- a/drivers/video/omap/lcd_omap2evm.c +++ b/drivers/video/omap/lcd_omap2evm.c @@ -24,7 +24,7 @@ #include #include #include -#include +#include #include #include @@ -61,9 +61,9 @@ static int omap2evm_panel_init(struct lcd_panel *panel, gpio_direction_output(LCD_PANEL_LR, 1); gpio_direction_output(LCD_PANEL_UD, 1); - twl4030_i2c_write_u8(TWL4030_MODULE_LED, 0x11, TWL_LED_LEDEN); - twl4030_i2c_write_u8(TWL4030_MODULE_PWMA, 0x01, TWL_PWMA_PWMAON); - twl4030_i2c_write_u8(TWL4030_MODULE_PWMA, 0x02, TWL_PWMA_PWMAOFF); + twl_i2c_write_u8(TWL4030_MODULE_LED, 0x11, TWL_LED_LEDEN); + twl_i2c_write_u8(TWL4030_MODULE_PWMA, 0x01, TWL_PWMA_PWMAON); + twl_i2c_write_u8(TWL4030_MODULE_PWMA, 0x02, TWL_PWMA_PWMAOFF); bklight_level = 100; return 0; @@ -101,7 +101,7 @@ static int omap2evm_bklight_setlevel(struct lcd_panel *panel, u8 c; if ((level >= 0) && (level <= 100)) { c = (125 * (100 - level)) / 100 + 2; - twl4030_i2c_write_u8(TWL4030_MODULE_PWMA, c, TWL_PWMA_PWMAOFF); + twl_i2c_write_u8(TWL4030_MODULE_PWMA, c, TWL_PWMA_PWMAOFF); bklight_level = level; } return 0; diff --git a/drivers/video/omap/lcd_omap3beagle.c b/drivers/video/omap/lcd_omap3beagle.c index fc503d8f3c24..ca75cc2a87a5 100644 --- a/drivers/video/omap/lcd_omap3beagle.c +++ b/drivers/video/omap/lcd_omap3beagle.c @@ -23,7 +23,7 @@ #include #include #include -#include +#include #include #include diff --git a/drivers/video/omap/lcd_omap3evm.c b/drivers/video/omap/lcd_omap3evm.c index ae2edc4081a8..06840da0b094 100644 --- a/drivers/video/omap/lcd_omap3evm.c +++ b/drivers/video/omap/lcd_omap3evm.c @@ -23,7 +23,7 @@ #include #include #include -#include +#include #include #include @@ -63,9 +63,9 @@ static int omap3evm_panel_init(struct lcd_panel *panel, gpio_direction_output(LCD_PANEL_LR, 1); gpio_direction_output(LCD_PANEL_UD, 1); - twl4030_i2c_write_u8(TWL4030_MODULE_LED, 0x11, TWL_LED_LEDEN); - twl4030_i2c_write_u8(TWL4030_MODULE_PWMA, 0x01, TWL_PWMA_PWMAON); - twl4030_i2c_write_u8(TWL4030_MODULE_PWMA, 0x02, TWL_PWMA_PWMAOFF); + twl_i2c_write_u8(TWL4030_MODULE_LED, 0x11, TWL_LED_LEDEN); + twl_i2c_write_u8(TWL4030_MODULE_PWMA, 0x01, TWL_PWMA_PWMAON); + twl_i2c_write_u8(TWL4030_MODULE_PWMA, 0x02, TWL_PWMA_PWMAOFF); bklight_level = 100; return 0; @@ -102,7 +102,7 @@ static int omap3evm_bklight_setlevel(struct lcd_panel *panel, u8 c; if ((level >= 0) && (level <= 100)) { c = (125 * (100 - level)) / 100 + 2; - twl4030_i2c_write_u8(TWL4030_MODULE_PWMA, c, TWL_PWMA_PWMAOFF); + twl_i2c_write_u8(TWL4030_MODULE_PWMA, c, TWL_PWMA_PWMAOFF); bklight_level = level; } return 0; diff --git a/drivers/video/omap/lcd_overo.c b/drivers/video/omap/lcd_overo.c index 56ee192e9ee2..564933ffac6e 100644 --- a/drivers/video/omap/lcd_overo.c +++ b/drivers/video/omap/lcd_overo.c @@ -21,7 +21,7 @@ #include #include -#include +#include #include #include diff --git a/sound/soc/omap/sdp3430.c b/sound/soc/omap/sdp3430.c index c071f9603a38..3c85c0f92823 100644 --- a/sound/soc/omap/sdp3430.c +++ b/sound/soc/omap/sdp3430.c @@ -24,7 +24,7 @@ #include #include -#include +#include #include #include #include @@ -321,11 +321,11 @@ static int __init sdp3430_soc_init(void) *(unsigned int *)sdp3430_dai[1].cpu_dai->private_data = 2; /* McBSP3 */ /* Set TWL4030 GPIO6 as EXTMUTE signal */ - twl4030_i2c_read_u8(TWL4030_MODULE_INTBR, &pin_mux, + twl_i2c_read_u8(TWL4030_MODULE_INTBR, &pin_mux, TWL4030_INTBR_PMBR1); pin_mux &= ~TWL4030_GPIO6_PWM0_MUTE(0x03); pin_mux |= TWL4030_GPIO6_PWM0_MUTE(0x02); - twl4030_i2c_write_u8(TWL4030_MODULE_INTBR, pin_mux, + twl_i2c_write_u8(TWL4030_MODULE_INTBR, pin_mux, TWL4030_INTBR_PMBR1); ret = platform_device_add(sdp3430_snd_device); -- cgit v1.2.3 From 2fbe74b90bafebce615466b4c20f96b0465df1ae Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Wed, 16 Dec 2009 16:54:43 +0100 Subject: sound/oss/pss: Fix test of unsigned in pss_reset_dsp() and pss_download_boot() limit and jiffies are unsigned so the test did not work. Signed-off-by: Roel Kluin Signed-off-by: Takashi Iwai --- sound/oss/pss.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'sound') diff --git a/sound/oss/pss.c b/sound/oss/pss.c index 83f5ee236b12..e19dd5dcc2de 100644 --- a/sound/oss/pss.c +++ b/sound/oss/pss.c @@ -269,7 +269,7 @@ static int pss_reset_dsp(pss_confdata * devc) unsigned long i, limit = jiffies + HZ/10; outw(0x2000, REG(PSS_CONTROL)); - for (i = 0; i < 32768 && (limit-jiffies >= 0); i++) + for (i = 0; i < 32768 && time_after_eq(limit, jiffies); i++) inw(REG(PSS_CONTROL)); outw(0x0000, REG(PSS_CONTROL)); return 1; @@ -369,11 +369,11 @@ static int pss_download_boot(pss_confdata * devc, unsigned char *block, int size outw(0, REG(PSS_DATA)); limit = jiffies + HZ/10; - for (i = 0; i < 32768 && (limit - jiffies >= 0); i++) + for (i = 0; i < 32768 && time_after_eq(limit, jiffies); i++) val = inw(REG(PSS_STATUS)); limit = jiffies + HZ/10; - for (i = 0; i < 32768 && (limit-jiffies >= 0); i++) + for (i = 0; i < 32768 && time_after_eq(limit, jiffies); i++) { val = inw(REG(PSS_STATUS)); if (val & 0x4000) -- cgit v1.2.3 From 3e85fd614c7b6bb7f33bb04a0dcb5a3bfca4c0fe Mon Sep 17 00:00:00 2001 From: Clemens Ladisch Date: Fri, 18 Dec 2009 09:27:24 +0100 Subject: sound: sgio2audio/pdaudiocf/usb-audio: initialize PCM buffer When allocating the PCM buffer, use vmalloc_user() instead of vmalloc(). Otherwise, it would be possible for applications to play the previous contents of the kernel memory to the speakers, or to read it directly if the buffer is exported to userspace. Signed-off-by: Clemens Ladisch Cc: Signed-off-by: Takashi Iwai --- sound/mips/sgio2audio.c | 2 +- sound/pcmcia/pdaudiocf/pdaudiocf_pcm.c | 2 +- sound/usb/usbaudio.c | 2 +- 3 files changed, 3 insertions(+), 3 deletions(-) (limited to 'sound') diff --git a/sound/mips/sgio2audio.c b/sound/mips/sgio2audio.c index 8691f4cf6191..f1d9d16b5486 100644 --- a/sound/mips/sgio2audio.c +++ b/sound/mips/sgio2audio.c @@ -609,7 +609,7 @@ static int snd_sgio2audio_pcm_hw_params(struct snd_pcm_substream *substream, /* alloc virtual 'dma' area */ if (runtime->dma_area) vfree(runtime->dma_area); - runtime->dma_area = vmalloc(size); + runtime->dma_area = vmalloc_user(size); if (runtime->dma_area == NULL) return -ENOMEM; runtime->dma_bytes = size; diff --git a/sound/pcmcia/pdaudiocf/pdaudiocf_pcm.c b/sound/pcmcia/pdaudiocf/pdaudiocf_pcm.c index d057e6489643..5cfa608823f7 100644 --- a/sound/pcmcia/pdaudiocf/pdaudiocf_pcm.c +++ b/sound/pcmcia/pdaudiocf/pdaudiocf_pcm.c @@ -51,7 +51,7 @@ static int snd_pcm_alloc_vmalloc_buffer(struct snd_pcm_substream *subs, size_t s return 0; /* already enough large */ vfree(runtime->dma_area); } - runtime->dma_area = vmalloc_32(size); + runtime->dma_area = vmalloc_32_user(size); if (! runtime->dma_area) return -ENOMEM; runtime->dma_bytes = size; diff --git a/sound/usb/usbaudio.c b/sound/usb/usbaudio.c index b074a594c595..4963defee18a 100644 --- a/sound/usb/usbaudio.c +++ b/sound/usb/usbaudio.c @@ -752,7 +752,7 @@ static int snd_pcm_alloc_vmalloc_buffer(struct snd_pcm_substream *subs, size_t s return 0; /* already large enough */ vfree(runtime->dma_area); } - runtime->dma_area = vmalloc(size); + runtime->dma_area = vmalloc_user(size); if (!runtime->dma_area) return -ENOMEM; runtime->dma_bytes = size; -- cgit v1.2.3 From 48c03ce72f2665f79a3fe54fc6d71b8cc3d30803 Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Thu, 17 Dec 2009 14:51:35 +0100 Subject: ASoC: wm8974: fix a wrong bit definition The wm8974 datasheet defines BUFIOEN as bit 2. Signed-off-by: Guennadi Liakhovetski Acked-by: Liam Girdwood Signed-off-by: Mark Brown Cc: stable@kernel.org --- sound/soc/codecs/wm8974.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'sound') diff --git a/sound/soc/codecs/wm8974.c b/sound/soc/codecs/wm8974.c index 81c57b5c591c..a808675388fc 100644 --- a/sound/soc/codecs/wm8974.c +++ b/sound/soc/codecs/wm8974.c @@ -47,7 +47,7 @@ static const u16 wm8974_reg[WM8974_CACHEREGNUM] = { }; #define WM8974_POWER1_BIASEN 0x08 -#define WM8974_POWER1_BUFIOEN 0x10 +#define WM8974_POWER1_BUFIOEN 0x04 struct wm8974_priv { struct snd_soc_codec codec; -- cgit v1.2.3 From d49464318a7c51676c44cbd1e2480f651cc43807 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Fri, 18 Dec 2009 20:25:30 +0100 Subject: ALSA: aaci - Fix a typo Fixed a typo of the max buffer size specified for buffer allocation changed in the commit d6797322231af98b9bb4afb175dd614cf511e5f7. Signed-off-by: Takashi Iwai --- sound/arm/aaci.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'sound') diff --git a/sound/arm/aaci.c b/sound/arm/aaci.c index 1497dce1b04a..ae38f2c342cc 100644 --- a/sound/arm/aaci.c +++ b/sound/arm/aaci.c @@ -1028,7 +1028,7 @@ static int __devinit aaci_init_pcm(struct aaci *aaci) snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_PLAYBACK, &aaci_playback_ops); snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_CAPTURE, &aaci_capture_ops); snd_pcm_lib_preallocate_pages_for_all(pcm, SNDRV_DMA_TYPE_DEV, - NULL, 0, 64 * 104); + NULL, 0, 64 * 1024); } return ret; -- cgit v1.2.3 From 6ca867c827c84d21316e9dc4035abe9480f8347c Mon Sep 17 00:00:00 2001 From: Russell King Date: Fri, 18 Dec 2009 17:48:35 +0000 Subject: ALSA: AACI: simplify codec rate information There's no need for a specific rule; ALSA's generic AC'97 support calculates the necessary rate constraint information itself, and we can use this directly. Signed-off-by: Russell King Signed-off-by: Takashi Iwai --- sound/arm/aaci.c | 75 +++----------------------------------------------------- 1 file changed, 3 insertions(+), 72 deletions(-) (limited to 'sound') diff --git a/sound/arm/aaci.c b/sound/arm/aaci.c index ae38f2c342cc..ea3be874c84f 100644 --- a/sound/arm/aaci.c +++ b/sound/arm/aaci.c @@ -330,63 +330,6 @@ static irqreturn_t aaci_irq(int irq, void *devid) /* * ALSA support. */ - -struct aaci_stream { - unsigned char codec_idx; - unsigned char rate_idx; -}; - -static struct aaci_stream aaci_streams[] = { - [ACSTREAM_FRONT] = { - .codec_idx = 0, - .rate_idx = AC97_RATES_FRONT_DAC, - }, - [ACSTREAM_SURROUND] = { - .codec_idx = 0, - .rate_idx = AC97_RATES_SURR_DAC, - }, - [ACSTREAM_LFE] = { - .codec_idx = 0, - .rate_idx = AC97_RATES_LFE_DAC, - }, -}; - -static inline unsigned int aaci_rate_mask(struct aaci *aaci, int streamid) -{ - struct aaci_stream *s = aaci_streams + streamid; - return aaci->ac97_bus->codec[s->codec_idx]->rates[s->rate_idx]; -} - -static unsigned int rate_list[] = { - 5512, 8000, 11025, 16000, 22050, 32000, 44100, - 48000, 64000, 88200, 96000, 176400, 192000 -}; - -/* - * Double-rate rule: we can support double rate iff channels == 2 - * (unimplemented) - */ -static int -aaci_rule_rate_by_channels(struct snd_pcm_hw_params *p, struct snd_pcm_hw_rule *rule) -{ - struct aaci *aaci = rule->private; - unsigned int rate_mask = SNDRV_PCM_RATE_8000_48000|SNDRV_PCM_RATE_5512; - struct snd_interval *c = hw_param_interval(p, SNDRV_PCM_HW_PARAM_CHANNELS); - - switch (c->max) { - case 6: - rate_mask &= aaci_rate_mask(aaci, ACSTREAM_LFE); - case 4: - rate_mask &= aaci_rate_mask(aaci, ACSTREAM_SURROUND); - case 2: - rate_mask &= aaci_rate_mask(aaci, ACSTREAM_FRONT); - } - - return snd_interval_list(hw_param_interval(p, rule->var), - ARRAY_SIZE(rate_list), rate_list, - rate_mask); -} - static struct snd_pcm_hardware aaci_hw_info = { .info = SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_MMAP_VALID | @@ -400,10 +343,7 @@ static struct snd_pcm_hardware aaci_hw_info = { */ .formats = SNDRV_PCM_FMTBIT_S16_LE, - /* should this be continuous or knot? */ - .rates = SNDRV_PCM_RATE_CONTINUOUS, - .rate_max = 48000, - .rate_min = 4000, + /* rates are setup from the AC'97 codec */ .channels_min = 2, .channels_max = 6, .buffer_bytes_max = 64 * 1024, @@ -423,6 +363,8 @@ static int __aaci_pcm_open(struct aaci *aaci, aacirun->substream = substream; runtime->private_data = aacirun; runtime->hw = aaci_hw_info; + runtime->hw.rates = aacirun->pcm->rates; + snd_pcm_limit_hw_rates(runtime); /* * FIXME: ALSA specifies fifo_size in bytes. If we're in normal @@ -433,17 +375,6 @@ static int __aaci_pcm_open(struct aaci *aaci, */ runtime->hw.fifo_size = aaci->fifosize * 2; - /* - * Add rule describing hardware rate dependency - * on the number of channels. - */ - ret = snd_pcm_hw_rule_add(runtime, 0, SNDRV_PCM_HW_PARAM_RATE, - aaci_rule_rate_by_channels, aaci, - SNDRV_PCM_HW_PARAM_CHANNELS, - SNDRV_PCM_HW_PARAM_RATE, -1); - if (ret) - goto out; - ret = request_irq(aaci->dev->irq[0], aaci_irq, IRQF_SHARED|IRQF_DISABLED, DRIVER_NAME, aaci); if (ret) -- cgit v1.2.3 From 4e30b69108b20eca80f1a323f969bf7629c7795f Mon Sep 17 00:00:00 2001 From: Russell King Date: Fri, 18 Dec 2009 17:48:37 +0000 Subject: ALSA: AACI: cleanup aaci_pcm_hw_params Since the recording and playback paths are now the same, eliminate the needless conditionals. Signed-off-by: Russell King Signed-off-by: Takashi Iwai --- sound/arm/aaci.c | 18 +++++++----------- 1 file changed, 7 insertions(+), 11 deletions(-) (limited to 'sound') diff --git a/sound/arm/aaci.c b/sound/arm/aaci.c index ea3be874c84f..2e28748a3d8d 100644 --- a/sound/arm/aaci.c +++ b/sound/arm/aaci.c @@ -438,18 +438,14 @@ static int aaci_pcm_hw_params(struct snd_pcm_substream *substream, err = snd_pcm_lib_malloc_pages(substream, params_buffer_bytes(params)); - if (err < 0) - goto out; - - err = snd_ac97_pcm_open(aacirun->pcm, params_rate(params), - params_channels(params), - aacirun->pcm->r[0].slots); - if (err) - goto out; + if (err >= 0) { + err = snd_ac97_pcm_open(aacirun->pcm, params_rate(params), + params_channels(params), + aacirun->pcm->r[0].slots); - aacirun->pcm_open = 1; + aacirun->pcm_open = err == 0; + } - out: return err; } @@ -458,7 +454,7 @@ static int aaci_pcm_prepare(struct snd_pcm_substream *substream) struct snd_pcm_runtime *runtime = substream->runtime; struct aaci_runtime *aacirun = runtime->private_data; - aacirun->start = (void *)runtime->dma_area; + aacirun->start = runtime->dma_area; aacirun->end = aacirun->start + snd_pcm_lib_buffer_bytes(substream); aacirun->ptr = aacirun->start; aacirun->period = -- cgit v1.2.3 From d3aee7996c30f928bbbbfd0994148e35d2e83084 Mon Sep 17 00:00:00 2001 From: Russell King Date: Fri, 18 Dec 2009 17:48:40 +0000 Subject: ALSA: AACI: factor common hw_params logic into aaci_pcm_hw_params Signed-off-by: Russell King Signed-off-by: Takashi Iwai --- sound/arm/aaci.c | 22 +++++++--------------- 1 file changed, 7 insertions(+), 15 deletions(-) (limited to 'sound') diff --git a/sound/arm/aaci.c b/sound/arm/aaci.c index 2e28748a3d8d..b88bbded2f4f 100644 --- a/sound/arm/aaci.c +++ b/sound/arm/aaci.c @@ -444,6 +444,11 @@ static int aaci_pcm_hw_params(struct snd_pcm_substream *substream, aacirun->pcm->r[0].slots); aacirun->pcm_open = err == 0; + aacirun->cr = CR_FEN | CR_COMPACT | CR_SZ16; + aacirun->fifosz = aaci->fifosize * 4; + + if (aacirun->cr & CR_COMPACT) + aacirun->fifosz >>= 1; } return err; @@ -554,14 +559,9 @@ static int aaci_pcm_playback_hw_params(struct snd_pcm_substream *substream, * Enable FIFO, compact mode, 16 bits per sample. * FIXME: double rate slots? */ - if (ret >= 0) { - aacirun->cr = CR_FEN | CR_COMPACT | CR_SZ16; + if (ret >= 0) aacirun->cr |= channels_to_txmask[channels]; - aacirun->fifosz = aaci->fifosize * 4; - if (aacirun->cr & CR_COMPACT) - aacirun->fifosz >>= 1; - } return ret; } @@ -648,18 +648,10 @@ static int aaci_pcm_capture_hw_params(struct snd_pcm_substream *substream, int ret; ret = aaci_pcm_hw_params(substream, aacirun, params); - - if (ret >= 0) { - aacirun->cr = CR_FEN | CR_COMPACT | CR_SZ16; - + if (ret >= 0) /* Line in record: slot 3 and 4 */ aacirun->cr |= CR_SL3 | CR_SL4; - aacirun->fifosz = aaci->fifosize * 4; - - if (aacirun->cr & CR_COMPACT) - aacirun->fifosz >>= 1; - } return ret; } -- cgit v1.2.3 From a08d56583f6b87e2981d1b6e9ee891bdc741cc44 Mon Sep 17 00:00:00 2001 From: Russell King Date: Fri, 18 Dec 2009 17:48:45 +0000 Subject: ALSA: AACI: add double-rate support Signed-off-by: Russell King Signed-off-by: Takashi Iwai --- sound/arm/aaci.c | 17 +++++++++++++++-- 1 file changed, 15 insertions(+), 2 deletions(-) (limited to 'sound') diff --git a/sound/arm/aaci.c b/sound/arm/aaci.c index b88bbded2f4f..b377370af2d7 100644 --- a/sound/arm/aaci.c +++ b/sound/arm/aaci.c @@ -366,6 +366,10 @@ static int __aaci_pcm_open(struct aaci *aaci, runtime->hw.rates = aacirun->pcm->rates; snd_pcm_limit_hw_rates(runtime); + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK && + aacirun->pcm->r[1].slots) + snd_ac97_pcm_double_rate_rules(runtime); + /* * FIXME: ALSA specifies fifo_size in bytes. If we're in normal * mode, each 32-bit word contains one sample. If we're in @@ -439,9 +443,12 @@ static int aaci_pcm_hw_params(struct snd_pcm_substream *substream, err = snd_pcm_lib_malloc_pages(substream, params_buffer_bytes(params)); if (err >= 0) { - err = snd_ac97_pcm_open(aacirun->pcm, params_rate(params), + unsigned int rate = params_rate(params); + int dbl = rate > 48000; + + err = snd_ac97_pcm_open(aacirun->pcm, rate, params_channels(params), - aacirun->pcm->r[0].slots); + aacirun->pcm->r[dbl].slots); aacirun->pcm_open = err == 0; aacirun->cr = CR_FEN | CR_COMPACT | CR_SZ16; @@ -808,6 +815,12 @@ static struct ac97_pcm ac97_defs[] __devinitdata = { (1 << AC97_SLOT_PCM_SRIGHT) | (1 << AC97_SLOT_LFE), }, + [1] = { + .slots = (1 << AC97_SLOT_PCM_LEFT) | + (1 << AC97_SLOT_PCM_RIGHT) | + (1 << AC97_SLOT_PCM_LEFT_0) | + (1 << AC97_SLOT_PCM_RIGHT_0), + }, }, }, [1] = { /* PCM in */ -- cgit v1.2.3 From d6a89fefa50feda5516cd5210ad0008a44632b52 Mon Sep 17 00:00:00 2001 From: Russell King Date: Fri, 18 Dec 2009 17:48:50 +0000 Subject: ALSA: AACI: switch to per-pcm locking We can use finer-grained locking, which makes things easier when we gain DMA support. Signed-off-by: Russell King Signed-off-by: Takashi Iwai --- sound/arm/aaci.c | 49 +++++++++++++++++++++++++++++-------------------- sound/arm/aaci.h | 2 +- 2 files changed, 30 insertions(+), 21 deletions(-) (limited to 'sound') diff --git a/sound/arm/aaci.c b/sound/arm/aaci.c index b377370af2d7..c5699863643b 100644 --- a/sound/arm/aaci.c +++ b/sound/arm/aaci.c @@ -172,14 +172,15 @@ static unsigned short aaci_ac97_read(struct snd_ac97 *ac97, unsigned short reg) return v; } -static inline void aaci_chan_wait_ready(struct aaci_runtime *aacirun) +static inline void +aaci_chan_wait_ready(struct aaci_runtime *aacirun, unsigned long mask) { u32 val; int timeout = 5000; do { val = readl(aacirun->base + AACI_SR); - } while (val & (SR_TXB|SR_RXB) && timeout--); + } while (val & mask && timeout--); } @@ -208,8 +209,10 @@ static void aaci_fifo_irq(struct aaci *aaci, int channel, u32 mask) writel(0, aacirun->base + AACI_IE); return; } - ptr = aacirun->ptr; + spin_lock(&aacirun->lock); + + ptr = aacirun->ptr; do { unsigned int len = aacirun->fifosz; u32 val; @@ -217,9 +220,9 @@ static void aaci_fifo_irq(struct aaci *aaci, int channel, u32 mask) if (aacirun->bytes <= 0) { aacirun->bytes += aacirun->period; aacirun->ptr = ptr; - spin_unlock(&aaci->lock); + spin_unlock(&aacirun->lock); snd_pcm_period_elapsed(aacirun->substream); - spin_lock(&aaci->lock); + spin_lock(&aacirun->lock); } if (!(aacirun->cr & CR_EN)) break; @@ -245,7 +248,10 @@ static void aaci_fifo_irq(struct aaci *aaci, int channel, u32 mask) ptr = aacirun->start; } } while(1); + aacirun->ptr = ptr; + + spin_unlock(&aacirun->lock); } if (mask & ISR_URINTR) { @@ -263,6 +269,8 @@ static void aaci_fifo_irq(struct aaci *aaci, int channel, u32 mask) return; } + spin_lock(&aacirun->lock); + ptr = aacirun->ptr; do { unsigned int len = aacirun->fifosz; @@ -271,9 +279,9 @@ static void aaci_fifo_irq(struct aaci *aaci, int channel, u32 mask) if (aacirun->bytes <= 0) { aacirun->bytes += aacirun->period; aacirun->ptr = ptr; - spin_unlock(&aaci->lock); + spin_unlock(&aacirun->lock); snd_pcm_period_elapsed(aacirun->substream); - spin_lock(&aaci->lock); + spin_lock(&aacirun->lock); } if (!(aacirun->cr & CR_EN)) break; @@ -301,6 +309,8 @@ static void aaci_fifo_irq(struct aaci *aaci, int channel, u32 mask) } while (1); aacirun->ptr = ptr; + + spin_unlock(&aacirun->lock); } } @@ -310,7 +320,6 @@ static irqreturn_t aaci_irq(int irq, void *devid) u32 mask; int i; - spin_lock(&aaci->lock); mask = readl(aaci->base + AACI_ALLINTS); if (mask) { u32 m = mask; @@ -320,7 +329,6 @@ static irqreturn_t aaci_irq(int irq, void *devid) } } } - spin_unlock(&aaci->lock); return mask ? IRQ_HANDLED : IRQ_NONE; } @@ -580,7 +588,7 @@ static void aaci_pcm_playback_stop(struct aaci_runtime *aacirun) ie &= ~(IE_URIE|IE_TXIE); writel(ie, aacirun->base + AACI_IE); aacirun->cr &= ~CR_EN; - aaci_chan_wait_ready(aacirun); + aaci_chan_wait_ready(aacirun, SR_TXB); writel(aacirun->cr, aacirun->base + AACI_TXCR); } @@ -588,7 +596,7 @@ static void aaci_pcm_playback_start(struct aaci_runtime *aacirun) { u32 ie; - aaci_chan_wait_ready(aacirun); + aaci_chan_wait_ready(aacirun, SR_TXB); aacirun->cr |= CR_EN; ie = readl(aacirun->base + AACI_IE); @@ -599,12 +607,12 @@ static void aaci_pcm_playback_start(struct aaci_runtime *aacirun) static int aaci_pcm_playback_trigger(struct snd_pcm_substream *substream, int cmd) { - struct aaci *aaci = substream->private_data; struct aaci_runtime *aacirun = substream->runtime->private_data; unsigned long flags; int ret = 0; - spin_lock_irqsave(&aaci->lock, flags); + spin_lock_irqsave(&aacirun->lock, flags); + switch (cmd) { case SNDRV_PCM_TRIGGER_START: aaci_pcm_playback_start(aacirun); @@ -631,7 +639,8 @@ static int aaci_pcm_playback_trigger(struct snd_pcm_substream *substream, int cm default: ret = -EINVAL; } - spin_unlock_irqrestore(&aaci->lock, flags); + + spin_unlock_irqrestore(&aacirun->lock, flags); return ret; } @@ -666,7 +675,7 @@ static void aaci_pcm_capture_stop(struct aaci_runtime *aacirun) { u32 ie; - aaci_chan_wait_ready(aacirun); + aaci_chan_wait_ready(aacirun, SR_RXB); ie = readl(aacirun->base + AACI_IE); ie &= ~(IE_ORIE | IE_RXIE); @@ -681,7 +690,7 @@ static void aaci_pcm_capture_start(struct aaci_runtime *aacirun) { u32 ie; - aaci_chan_wait_ready(aacirun); + aaci_chan_wait_ready(aacirun, SR_RXB); #ifdef DEBUG /* RX Timeout value: bits 28:17 in RXCR */ @@ -698,12 +707,11 @@ static void aaci_pcm_capture_start(struct aaci_runtime *aacirun) static int aaci_pcm_capture_trigger(struct snd_pcm_substream *substream, int cmd) { - struct aaci *aaci = substream->private_data; struct aaci_runtime *aacirun = substream->runtime->private_data; unsigned long flags; int ret = 0; - spin_lock_irqsave(&aaci->lock, flags); + spin_lock_irqsave(&aacirun->lock, flags); switch (cmd) { case SNDRV_PCM_TRIGGER_START: @@ -732,7 +740,7 @@ static int aaci_pcm_capture_trigger(struct snd_pcm_substream *substream, int cmd ret = -EINVAL; } - spin_unlock_irqrestore(&aaci->lock, flags); + spin_unlock_irqrestore(&aacirun->lock, flags); return ret; } @@ -933,7 +941,6 @@ static struct aaci * __devinit aaci_init_card(struct amba_device *dev) aaci = card->private_data; mutex_init(&aaci->ac97_sem); - spin_lock_init(&aaci->lock); aaci->card = card; aaci->dev = dev; @@ -1020,12 +1027,14 @@ static int __devinit aaci_probe(struct amba_device *dev, struct amba_id *id) /* * Playback uses AACI channel 0 */ + spin_lock_init(&aaci->playback.lock); aaci->playback.base = aaci->base + AACI_CSCH1; aaci->playback.fifo = aaci->base + AACI_DR1; /* * Capture uses AACI channel 0 */ + spin_lock_init(&aaci->capture.lock); aaci->capture.base = aaci->base + AACI_CSCH1; aaci->capture.fifo = aaci->base + AACI_DR1; diff --git a/sound/arm/aaci.h b/sound/arm/aaci.h index 924f69c1c44c..6a4a2eebdda1 100644 --- a/sound/arm/aaci.h +++ b/sound/arm/aaci.h @@ -202,6 +202,7 @@ struct aaci_runtime { void __iomem *base; void __iomem *fifo; + spinlock_t lock; struct ac97_pcm *pcm; int pcm_open; @@ -232,7 +233,6 @@ struct aaci { struct snd_ac97 *ac97; u32 maincr; - spinlock_t lock; struct aaci_runtime playback; struct aaci_runtime capture; -- cgit v1.2.3 From ef86f581f7e8b29cb58d7f4e892e1a91b3805124 Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Sat, 19 Dec 2009 08:18:03 +0100 Subject: ALSA: Use kzalloc for allocating only one thing Use kzalloc rather than kcalloc(1,...) The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // @@ @@ - kcalloc(1, + kzalloc( ...) // Signed-off-by: Julia Lawall Signed-off-by: Takashi Iwai --- sound/isa/msnd/msnd_midi.c | 2 +- sound/pci/hda/patch_realtek.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'sound') diff --git a/sound/isa/msnd/msnd_midi.c b/sound/isa/msnd/msnd_midi.c index cb9aa4c4edd0..4be562b2cf21 100644 --- a/sound/isa/msnd/msnd_midi.c +++ b/sound/isa/msnd/msnd_midi.c @@ -162,7 +162,7 @@ int snd_msndmidi_new(struct snd_card *card, int device) err = snd_rawmidi_new(card, "MSND-MIDI", device, 1, 1, &rmidi); if (err < 0) return err; - mpu = kcalloc(1, sizeof(*mpu), GFP_KERNEL); + mpu = kzalloc(sizeof(*mpu), GFP_KERNEL); if (mpu == NULL) { snd_device_free(card, rmidi); return -ENOMEM; diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index aeed4cc5aa79..20c1828e4bac 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -12857,7 +12857,7 @@ static int patch_alc268(struct hda_codec *codec) int board_config; int i, has_beep, err; - spec = kcalloc(1, sizeof(*spec), GFP_KERNEL); + spec = kzalloc(sizeof(*spec), GFP_KERNEL); if (spec == NULL) return -ENOMEM; -- cgit v1.2.3 From e2595322a3a353a59cecd7f57e7aa421ecb02d12 Mon Sep 17 00:00:00 2001 From: Daniel T Chen Date: Sat, 19 Dec 2009 18:19:02 -0500 Subject: ALSA: hda: Set Front Mic to input vref 50% for Lenovo 3000 Y410 BugLink: https://bugs.launchpad.net/bugs/479373 The OR has verified with hda-verb that the internal microphone needs VREF50 set for audible capture. Signed-off-by: Daniel T Chen Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) (limited to 'sound') diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 84bc2c7c4421..1554c3a6fd2e 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -10686,6 +10686,13 @@ static struct hda_verb alc262_lenovo_3000_unsol_verbs[] = { {} }; +static struct hda_verb alc262_lenovo_3000_init_verbs[] = { + /* Front Mic pin: input vref at 50% */ + {0x19, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF50}, + {0x19, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE}, + {} +}; + static struct hda_input_mux alc262_fujitsu_capture_source = { .num_items = 3, .items = { @@ -11728,7 +11735,8 @@ static struct alc_config_preset alc262_presets[] = { [ALC262_LENOVO_3000] = { .mixers = { alc262_lenovo_3000_mixer }, .init_verbs = { alc262_init_verbs, alc262_EAPD_verbs, - alc262_lenovo_3000_unsol_verbs }, + alc262_lenovo_3000_unsol_verbs, + alc262_lenovo_3000_init_verbs }, .num_dacs = ARRAY_SIZE(alc262_dac_nids), .dac_nids = alc262_dac_nids, .hp_nid = 0x03, -- cgit v1.2.3 From 0f86a228f4a4639b3142ce0dad208433b2db377a Mon Sep 17 00:00:00 2001 From: Hector Martin Date: Sun, 20 Dec 2009 22:51:18 +0100 Subject: ALSA: HDA: simplify Aspire 8930G verb array This patch just simplifies the 8930G verb array a bit. Just use the common ALC889 EAPD verb array to make things more consistent. The file is already huge enough already. Signed-off-by: Hector Martin Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) (limited to 'sound') diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 1554c3a6fd2e..cb97323acc17 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -1665,9 +1665,6 @@ static struct hda_verb alc889_acer_aspire_8930g_verbs[] = { /* some bit here disables the other DACs. Init=0x4900 */ {0x20, AC_VERB_SET_COEF_INDEX, 0x08}, {0x20, AC_VERB_SET_PROC_COEF, 0x0000}, -/* Enable amplifiers */ - {0x14, AC_VERB_SET_EAPD_BTLENABLE, 0x02}, - {0x15, AC_VERB_SET_EAPD_BTLENABLE, 0x02}, /* DMIC fix * This laptop has a stereo digital microphone. The mics are only 1cm apart * which makes the stereo useless. However, either the mic or the ALC889 @@ -9386,7 +9383,8 @@ static struct alc_config_preset alc882_presets[] = { .mixers = { alc888_base_mixer, alc883_chmode_mixer }, .init_verbs = { alc883_init_verbs, alc880_gpio1_init_verbs, - alc889_acer_aspire_8930g_verbs }, + alc889_acer_aspire_8930g_verbs, + alc889_eapd_verbs}, .num_dacs = ARRAY_SIZE(alc883_dac_nids), .dac_nids = alc883_dac_nids, .num_adc_nids = ARRAY_SIZE(alc889_adc_nids), -- cgit v1.2.3 From 556eea9a926bff8f014b4f80522b4de97ae84213 Mon Sep 17 00:00:00 2001 From: Hector Martin Date: Sun, 20 Dec 2009 22:51:23 +0100 Subject: ALSA: HDA: remove useless mixers on Aspire 8930G This patch removes some extra mixers that do nothing on the Acer Aspire 8930G. The CD mixer is useless because the SATA DVD/Blu-Ray drive has no analog audio output, and the Side mixer is useless because we max out at 6ch anyway. Signed-off-by: Hector Martin Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 21 ++++++++++++++++++++- 1 file changed, 20 insertions(+), 1 deletion(-) (limited to 'sound') diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index cb97323acc17..faeb74f28207 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -1777,6 +1777,25 @@ static struct snd_kcontrol_new alc888_base_mixer[] = { { } /* end */ }; +static struct snd_kcontrol_new alc889_acer_aspire_8930g_mixer[] = { + HDA_CODEC_VOLUME("Front Playback Volume", 0x0c, 0x0, HDA_OUTPUT), + HDA_BIND_MUTE("Front Playback Switch", 0x0c, 2, HDA_INPUT), + HDA_CODEC_VOLUME("Surround Playback Volume", 0x0d, 0x0, HDA_OUTPUT), + HDA_BIND_MUTE("Surround Playback Switch", 0x0d, 2, HDA_INPUT), + HDA_CODEC_VOLUME_MONO("Center Playback Volume", 0x0e, 1, 0x0, + HDA_OUTPUT), + HDA_CODEC_VOLUME_MONO("LFE Playback Volume", 0x0e, 2, 0x0, HDA_OUTPUT), + HDA_BIND_MUTE_MONO("Center Playback Switch", 0x0e, 1, 2, HDA_INPUT), + HDA_BIND_MUTE_MONO("LFE Playback Switch", 0x0e, 2, 2, HDA_INPUT), + HDA_CODEC_VOLUME("Line Playback Volume", 0x0b, 0x02, HDA_INPUT), + HDA_CODEC_MUTE("Line Playback Switch", 0x0b, 0x02, HDA_INPUT), + HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x0, HDA_INPUT), + HDA_CODEC_VOLUME("Mic Boost", 0x18, 0, HDA_INPUT), + HDA_CODEC_MUTE("Mic Playback Switch", 0x0b, 0x0, HDA_INPUT), + { } /* end */ +}; + + static void alc888_acer_aspire_4930g_setup(struct hda_codec *codec) { struct alc_spec *spec = codec->spec; @@ -9380,7 +9399,7 @@ static struct alc_config_preset alc882_presets[] = { .init_hook = alc_automute_amp, }, [ALC888_ACER_ASPIRE_8930G] = { - .mixers = { alc888_base_mixer, + .mixers = { alc889_acer_aspire_8930g_mixer, alc883_chmode_mixer }, .init_verbs = { alc883_init_verbs, alc880_gpio1_init_verbs, alc889_acer_aspire_8930g_verbs, -- cgit v1.2.3 From f5de24b06aa46427500d0fdbe8616b73a71d8c28 Mon Sep 17 00:00:00 2001 From: Hector Martin Date: Sun, 20 Dec 2009 22:51:31 +0100 Subject: ALSA: HDA: add powersaving hook for Realtek The current Realtek code makes no specific provision for turning stuff off. The codec chip is placed into low-power mode generically, but this doesn't turn off any external hardware connected to it, in particular external amplifiers. This patch creates a hook function that is called by the codec suspend/resume functions. It ought to disable any external hardware in a device-specific way. I've implemented a generic ALC889 function that sets the EAPD pin properly, and used it for the Acer Aspire 8930G which can benefit from this feature. On my laptop, this results in ~0.5W extra savings. Signed-off-by: Hector Martin Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 36 ++++++++++++++++++++++++++++++++++++ 1 file changed, 36 insertions(+) (limited to 'sound') diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index faeb74f28207..b3abe9ca826d 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -337,6 +337,9 @@ struct alc_spec { /* hooks */ void (*init_hook)(struct hda_codec *codec); void (*unsol_event)(struct hda_codec *codec, unsigned int res); +#ifdef CONFIG_SND_HDA_POWER_SAVE + void (*power_hook)(struct hda_codec *codec, int power); +#endif /* for pin sensing */ unsigned int sense_updated: 1; @@ -388,6 +391,7 @@ struct alc_config_preset { void (*init_hook)(struct hda_codec *); #ifdef CONFIG_SND_HDA_POWER_SAVE struct hda_amp_list *loopbacks; + void (*power_hook)(struct hda_codec *codec, int power); #endif }; @@ -900,6 +904,7 @@ static void setup_preset(struct hda_codec *codec, spec->unsol_event = preset->unsol_event; spec->init_hook = preset->init_hook; #ifdef CONFIG_SND_HDA_POWER_SAVE + spec->power_hook = preset->power_hook; spec->loopback.amplist = preset->loopbacks; #endif @@ -1826,6 +1831,16 @@ static void alc889_acer_aspire_8930g_setup(struct hda_codec *codec) spec->autocfg.speaker_pins[2] = 0x1b; } +#ifdef CONFIG_SND_HDA_POWER_SAVE +static void alc889_power_eapd(struct hda_codec *codec, int power) +{ + snd_hda_codec_write(codec, 0x14, 0, + AC_VERB_SET_EAPD_BTLENABLE, power ? 2 : 0); + snd_hda_codec_write(codec, 0x15, 0, + AC_VERB_SET_EAPD_BTLENABLE, power ? 2 : 0); +} +#endif + /* * ALC880 3-stack model * @@ -3619,12 +3634,29 @@ static void alc_free(struct hda_codec *codec) snd_hda_detach_beep_device(codec); } +#ifdef CONFIG_SND_HDA_POWER_SAVE +static int alc_suspend(struct hda_codec *codec, pm_message_t state) +{ + struct alc_spec *spec = codec->spec; + if (spec && spec->power_hook) + spec->power_hook(codec, 0); + return 0; +} +#endif + #ifdef SND_HDA_NEEDS_RESUME static int alc_resume(struct hda_codec *codec) { +#ifdef CONFIG_SND_HDA_POWER_SAVE + struct alc_spec *spec = codec->spec; +#endif codec->patch_ops.init(codec); snd_hda_codec_resume_amp(codec); snd_hda_codec_resume_cache(codec); +#ifdef CONFIG_SND_HDA_POWER_SAVE + if (spec && spec->power_hook) + spec->power_hook(codec, 1); +#endif return 0; } #endif @@ -3641,6 +3673,7 @@ static struct hda_codec_ops alc_patch_ops = { .resume = alc_resume, #endif #ifdef CONFIG_SND_HDA_POWER_SAVE + .suspend = alc_suspend, .check_power_status = alc_check_power_status, #endif }; @@ -9420,6 +9453,9 @@ static struct alc_config_preset alc882_presets[] = { .unsol_event = alc_automute_amp_unsol_event, .setup = alc889_acer_aspire_8930g_setup, .init_hook = alc_automute_amp, +#ifdef CONFIG_SND_HDA_POWER_SAVE + .power_hook = alc889_power_eapd, +#endif }, [ALC888_ACER_ASPIRE_7730G] = { .mixers = { alc883_3ST_6ch_mixer, -- cgit v1.2.3 From 40962d7c741de1c21b6ce8516c1d9f8836fb383e Mon Sep 17 00:00:00 2001 From: Krzysztof Helt Date: Sat, 19 Dec 2009 18:31:04 +0100 Subject: ALSA: fix incorrect rounding direction in snd_interval_ratnum() The direction of rounding is incorrect in the snd_interval_ratnum() It was detected with following parameters (sb8 driver playing 8kHz stereo file): - num is always 1000000 - requested frequency rate is from 7999 to 7999 (single frequency) The first loop calculates div_down(num, freq->min) which is 125. Thus, a frequency range's minimum value is 1000000 / 125 = 8000 Hz. The second loop calculates div_up(num, freq->max) which is 126 The frequency range's maximum value is 1000000 / 126 = 7936 Hz. The range maximum is lower than the range minimum so the function fails due to empty result range. Signed-off-by: Krzysztof Helt Signed-off-by: Takashi Iwai --- sound/core/pcm_lib.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'sound') diff --git a/sound/core/pcm_lib.c b/sound/core/pcm_lib.c index 30f410832a25..a27545b23ee9 100644 --- a/sound/core/pcm_lib.c +++ b/sound/core/pcm_lib.c @@ -758,7 +758,7 @@ int snd_interval_ratnum(struct snd_interval *i, int diff; if (q == 0) q = 1; - den = div_down(num, q); + den = div_up(num, q); if (den < rats[k].den_min) continue; if (den > rats[k].den_max) @@ -794,7 +794,7 @@ int snd_interval_ratnum(struct snd_interval *i, i->empty = 1; return -EINVAL; } - den = div_up(num, q); + den = div_down(num, q); if (den > rats[k].den_max) continue; if (den < rats[k].den_min) -- cgit v1.2.3 From db8cf334f66bdf1ba2b3d2f7128095fc9b7a6e2b Mon Sep 17 00:00:00 2001 From: Krzysztof Helt Date: Sun, 20 Dec 2009 20:15:19 +0100 Subject: ALSA: sbawe: fix memory detection Memory amount is increased before a successful write-read sequence is done. Thus, 512 kB of onboard memory is detected on memoryless cards like SB32. Move the increasing of memory counter after successful read is done. Signed-off-by: Krzysztof Helt Signed-off-by: Takashi Iwai --- sound/isa/sb/emu8000.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'sound') diff --git a/sound/isa/sb/emu8000.c b/sound/isa/sb/emu8000.c index 96678d5d3834..751762f1c59a 100644 --- a/sound/isa/sb/emu8000.c +++ b/sound/isa/sb/emu8000.c @@ -393,8 +393,6 @@ size_dram(struct snd_emu8000 *emu) while (size < EMU8000_MAX_DRAM) { - size += 512 * 1024; /* increment 512kbytes */ - /* Write a unique data on the test address. * if the address is out of range, the data is written on * 0x200000(=EMU8000_DRAM_OFFSET). Then the id word is @@ -414,7 +412,9 @@ size_dram(struct snd_emu8000 *emu) /*snd_emu8000_read_wait(emu);*/ EMU8000_SMLD_READ(emu); /* discard stale data */ if (EMU8000_SMLD_READ(emu) != UNIQUE_ID2) - break; /* we must have wrapped around */ + break; /* no memory at this address */ + + size += 512 * 1024; /* increment 512kbytes */ snd_emu8000_read_wait(emu); -- cgit v1.2.3 From d8d881dd2c814e1500558889d800cf78d11cf898 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Tue, 22 Dec 2009 07:52:49 +0100 Subject: ALSA: hda - Fix NULL dereference with enable_beep=0 option Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_sigmatel.c | 19 ++++++++++--------- 1 file changed, 10 insertions(+), 9 deletions(-) (limited to 'sound') diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c index 3d59f8325848..417fb22ae83c 100644 --- a/sound/pci/hda/patch_sigmatel.c +++ b/sound/pci/hda/patch_sigmatel.c @@ -3779,15 +3779,16 @@ static int stac92xx_parse_auto_config(struct hda_codec *codec, hda_nid_t dig_out err = snd_hda_attach_beep_device(codec, nid); if (err < 0) return err; - /* IDT/STAC codecs have linear beep tone parameter */ - codec->beep->linear_tone = 1; - /* if no beep switch is available, make its own one */ - caps = query_amp_caps(codec, nid, HDA_OUTPUT); - if (codec->beep && - !((caps & AC_AMPCAP_MUTE) >> AC_AMPCAP_MUTE_SHIFT)) { - err = stac92xx_beep_switch_ctl(codec); - if (err < 0) - return err; + if (codec->beep) { + /* IDT/STAC codecs have linear beep tone parameter */ + codec->beep->linear_tone = 1; + /* if no beep switch is available, make its own one */ + caps = query_amp_caps(codec, nid, HDA_OUTPUT); + if (!(caps & AC_AMPCAP_MUTE)) { + err = stac92xx_beep_switch_ctl(codec); + if (err < 0) + return err; + } } } #endif -- cgit v1.2.3 From 1a5ba2e9fc7999b8de2a71c7e7b9f58d752c05e4 Mon Sep 17 00:00:00 2001 From: Rafael Avila de Espindola Date: Tue, 22 Dec 2009 07:59:37 +0100 Subject: ALSA: hda - Add support for the new 27 inch IMacs With the attached patch I am able to use the sound on a new IMac 27. What works: *) Internal speakers *) Internal microphone *) Headphone I don't have an external mic or a SPDIF device to test the rest. Signed-off-by: Rafael Avila de Espindola Signed-off-by: Takashi Iwai --- Documentation/sound/alsa/HD-Audio-Models.txt | 1 + sound/pci/hda/patch_cirrus.c | 22 +++++++++++++++++++++- 2 files changed, 22 insertions(+), 1 deletion(-) (limited to 'sound') diff --git a/Documentation/sound/alsa/HD-Audio-Models.txt b/Documentation/sound/alsa/HD-Audio-Models.txt index e93affff3af8..e72cee9e2a71 100644 --- a/Documentation/sound/alsa/HD-Audio-Models.txt +++ b/Documentation/sound/alsa/HD-Audio-Models.txt @@ -403,4 +403,5 @@ STAC9872 Cirrus Logic CS4206/4207 ======================== mbp55 MacBook Pro 5,5 + imac27 IMac 27 Inch auto BIOS setup (default) diff --git a/sound/pci/hda/patch_cirrus.c b/sound/pci/hda/patch_cirrus.c index 4b200da1bd18..fe0423c39598 100644 --- a/sound/pci/hda/patch_cirrus.c +++ b/sound/pci/hda/patch_cirrus.c @@ -66,6 +66,7 @@ struct cs_spec { /* available models */ enum { CS420X_MBP55, + CS420X_IMAC27, CS420X_AUTO, CS420X_MODELS }; @@ -827,7 +828,8 @@ static void cs_automute(struct hda_codec *codec) AC_VERB_SET_PIN_WIDGET_CONTROL, hp_present ? 0 : PIN_OUT); } - if (spec->board_config == CS420X_MBP55) { + if (spec->board_config == CS420X_MBP55 || + spec->board_config == CS420X_IMAC27) { unsigned int gpio = hp_present ? 0x02 : 0x08; snd_hda_codec_write(codec, 0x01, 0, AC_VERB_SET_GPIO_DATA, gpio); @@ -1069,12 +1071,14 @@ static int cs_parse_auto_config(struct hda_codec *codec) static const char *cs420x_models[CS420X_MODELS] = { [CS420X_MBP55] = "mbp55", + [CS420X_IMAC27] = "imac27", [CS420X_AUTO] = "auto", }; static struct snd_pci_quirk cs420x_cfg_tbl[] = { SND_PCI_QUIRK(0x10de, 0xcb79, "MacBookPro 5,5", CS420X_MBP55), + SND_PCI_QUIRK(0x8086, 0x7270, "IMac 27 Inch", CS420X_IMAC27), {} /* terminator */ }; @@ -1097,8 +1101,23 @@ static struct cs_pincfg mbp55_pincfgs[] = { {} /* terminator */ }; +static struct cs_pincfg imac27_pincfgs[] = { + { 0x09, 0x012b4050 }, + { 0x0a, 0x90100140 }, + { 0x0b, 0x90100142 }, + { 0x0c, 0x018b3020 }, + { 0x0d, 0x90a00110 }, + { 0x0e, 0x400000f0 }, + { 0x0f, 0x01cbe030 }, + { 0x10, 0x014be060 }, + { 0x12, 0x01ab9070 }, + { 0x15, 0x400000f0 }, + {} /* terminator */ +}; + static struct cs_pincfg *cs_pincfgs[CS420X_MODELS] = { [CS420X_MBP55] = mbp55_pincfgs, + [CS420X_IMAC27] = imac27_pincfgs, }; static void fix_pincfg(struct hda_codec *codec, int model) @@ -1128,6 +1147,7 @@ static int patch_cs420x(struct hda_codec *codec) fix_pincfg(codec, spec->board_config); switch (spec->board_config) { + case CS420X_IMAC27: case CS420X_MBP55: /* GPIO1 = headphones */ /* GPIO3 = speakers */ -- cgit v1.2.3 From 9dc8398bab52931435fce403ce2eaf5822f28e58 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Tue, 22 Dec 2009 08:15:01 +0100 Subject: ALSA: hda - Add MSI blacklist A machine with AMD CPU with Nvidia board doesn't work with MSI. Reported-by: Robert J. King Signed-off-by: Takashi Iwai --- sound/pci/hda/hda_intel.c | 1 + 1 file changed, 1 insertion(+) (limited to 'sound') diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c index 9b56f937913e..ff8ad46cc50e 100644 --- a/sound/pci/hda/hda_intel.c +++ b/sound/pci/hda/hda_intel.c @@ -2322,6 +2322,7 @@ static void __devinit check_probe_mask(struct azx *chip, int dev) * white/black-list for enable_msi */ static struct snd_pci_quirk msi_black_list[] __devinitdata = { + SND_PCI_QUIRK(0x1043, 0x81f2, "ASUS", 0), /* Athlon64 X2 + nvidia */ {} }; -- cgit v1.2.3 From a9605391cfab2bf9a73e51faac5147622f73c6d5 Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Mon, 21 Dec 2009 16:36:10 -0800 Subject: ALSA: sound/core/pcm_timer.c: use lib/gcd.c Make sound/core/pcm_timer.c use lib/gcd.c Signed-off-by: Florian Fainelli Signed-off-by: Andrew Morton Signed-off-by: Takashi Iwai --- sound/core/Kconfig | 1 + sound/core/pcm_timer.c | 17 +---------------- 2 files changed, 2 insertions(+), 16 deletions(-) (limited to 'sound') diff --git a/sound/core/Kconfig b/sound/core/Kconfig index c15682a2f9db..475455c76610 100644 --- a/sound/core/Kconfig +++ b/sound/core/Kconfig @@ -5,6 +5,7 @@ config SND_TIMER config SND_PCM tristate select SND_TIMER + select GCD config SND_HWDEP tristate diff --git a/sound/core/pcm_timer.c b/sound/core/pcm_timer.c index ca8068b63d6c..b01d9481d632 100644 --- a/sound/core/pcm_timer.c +++ b/sound/core/pcm_timer.c @@ -20,6 +20,7 @@ */ #include +#include #include #include #include @@ -28,22 +29,6 @@ * Timer functions */ -/* Greatest common divisor */ -static unsigned long gcd(unsigned long a, unsigned long b) -{ - unsigned long r; - if (a < b) { - r = a; - a = b; - b = r; - } - while ((r = a % b) != 0) { - a = b; - b = r; - } - return b; -} - void snd_pcm_timer_resolution_change(struct snd_pcm_substream *substream) { unsigned long rate, mult, fsize, l, post; -- cgit v1.2.3 From b6aa179334743c6152bd63f1fa368d6db3720db9 Mon Sep 17 00:00:00 2001 From: Uwe Kleine-König Date: Wed, 16 Dec 2009 17:10:09 +0100 Subject: ASoC: sh: FSI:: don't check platform_get_irq's return value against zero MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit platform_get_irq returns -ENXIO on failure, so !irq was probably always true. Better use (int)irq <= 0. Note that a return value of zero is still handled as error even though this could mean irq0. This is a followup to 305b3228f9ff4d59f49e6d34a7034d44ee8ce2f0 that changed the return value of platform_get_irq from 0 to -ENXIO on error. Signed-off-by: Uwe Kleine-König Acked-by: Liam Girdwood Signed-off-by: Mark Brown --- sound/soc/sh/fsi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'sound') diff --git a/sound/soc/sh/fsi.c b/sound/soc/sh/fsi.c index 9c49c11c43ce..42813b808389 100644 --- a/sound/soc/sh/fsi.c +++ b/sound/soc/sh/fsi.c @@ -876,7 +876,7 @@ static int fsi_probe(struct platform_device *pdev) res = platform_get_resource(pdev, IORESOURCE_MEM, 0); irq = platform_get_irq(pdev, 0); - if (!res || !irq) { + if (!res || (int)irq <= 0) { dev_err(&pdev->dev, "Not enough FSI platform resources.\n"); ret = -ENODEV; goto exit; -- cgit v1.2.3 From 1628af5adf64cc2960bce81009f119de822f876e Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Tue, 22 Dec 2009 09:26:10 +0100 Subject: ASoC: add missing parameter to mx27vis_hifi_hw_free() Commit 2ccafed4 added an extra parameter to the DAI .set_pll() method, but it missed this call in sound/soc/imx/mx27vis_wm8974.c. Signed-off-by: Guennadi Liakhovetski Acked-by: Liam Girdwood Signed-off-by: Mark Brown --- sound/soc/imx/mx27vis_wm8974.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'sound') diff --git a/sound/soc/imx/mx27vis_wm8974.c b/sound/soc/imx/mx27vis_wm8974.c index 0267d2d91685..07d2a248438c 100644 --- a/sound/soc/imx/mx27vis_wm8974.c +++ b/sound/soc/imx/mx27vis_wm8974.c @@ -180,7 +180,8 @@ static int mx27vis_hifi_hw_free(struct snd_pcm_substream *substream) struct snd_soc_dai *codec_dai = rtd->dai->codec_dai; /* disable the PLL */ - return codec_dai->ops->set_pll(codec_dai, IGNORED_ARG, 0, 0); + return codec_dai->ops->set_pll(codec_dai, IGNORED_ARG, IGNORED_ARG, + 0, 0); } /* -- cgit v1.2.3 From f62faedbed546f4e0c1ba204999e7c206059f305 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Wed, 23 Dec 2009 09:27:51 +0100 Subject: ALSA: hda - Set mixer name after codec patch Postpone the mixer name setup after the codec patch since the codec patch may change the codec name string in itself. Signed-off-by: Takashi Iwai --- sound/pci/hda/hda_codec.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) (limited to 'sound') diff --git a/sound/pci/hda/hda_codec.c b/sound/pci/hda/hda_codec.c index 9cfdb771928c..950ee5cfcacf 100644 --- a/sound/pci/hda/hda_codec.c +++ b/sound/pci/hda/hda_codec.c @@ -1086,11 +1086,6 @@ int snd_hda_codec_configure(struct hda_codec *codec) if (err < 0) return err; } - /* audio codec should override the mixer name */ - if (codec->afg || !*codec->bus->card->mixername) - snprintf(codec->bus->card->mixername, - sizeof(codec->bus->card->mixername), - "%s %s", codec->vendor_name, codec->chip_name); if (is_generic_config(codec)) { err = snd_hda_parse_generic_codec(codec); @@ -1109,6 +1104,11 @@ int snd_hda_codec_configure(struct hda_codec *codec) patched: if (!err && codec->patch_ops.unsol_event) err = init_unsol_queue(codec->bus); + /* audio codec should override the mixer name */ + if (!err && (codec->afg || !*codec->bus->card->mixername)) + snprintf(codec->bus->card->mixername, + sizeof(codec->bus->card->mixername), + "%s %s", codec->vendor_name, codec->chip_name); return err; } EXPORT_SYMBOL_HDA(snd_hda_codec_configure); -- cgit v1.2.3 From 48e3cbb3f67a27d9c2db075f3d0f700246c40caa Mon Sep 17 00:00:00 2001 From: Eric Millbrandt Date: Tue, 22 Dec 2009 10:13:24 -0500 Subject: ASoC: Do not write to invalid registers on the wm9712. This patch fixes a bug where "virtual" registers were being written to the ac97 bus. This was causing unrelated registers to become corrupted (headphone 0x04, touchscreen 0x78, etc). This patch duplicates protection that was included in the wm9713 driver. Signed-off-by: Eric Millbrandt Acked-by: Liam Girdwood Signed-off-by: Mark Brown Cc: stable@kernel.org --- sound/soc/codecs/wm9712.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'sound') diff --git a/sound/soc/codecs/wm9712.c b/sound/soc/codecs/wm9712.c index 0ac1215dcd9b..e237bf615129 100644 --- a/sound/soc/codecs/wm9712.c +++ b/sound/soc/codecs/wm9712.c @@ -463,7 +463,8 @@ static int ac97_write(struct snd_soc_codec *codec, unsigned int reg, { u16 *cache = codec->reg_cache; - soc_ac97_ops.write(codec->ac97, reg, val); + if (reg < 0x7c) + soc_ac97_ops.write(codec->ac97, reg, val); reg = reg >> 1; if (reg < (ARRAY_SIZE(wm9712_reg))) cache[reg] = val; -- cgit v1.2.3 From 95e70e87533f9d117d369495ee633cb7d18dc802 Mon Sep 17 00:00:00 2001 From: Anisse Astier Date: Wed, 23 Dec 2009 17:28:45 +0100 Subject: ALSA: hda - Add STAC9205 PCI_QUIRK for Dell Vostro 1700 Signed-off-by: Anisse Astier Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_sigmatel.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'sound') diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c index 417fb22ae83c..eeda7beeb57a 100644 --- a/sound/pci/hda/patch_sigmatel.c +++ b/sound/pci/hda/patch_sigmatel.c @@ -2104,6 +2104,7 @@ static unsigned int ref9205_pin_configs[12] = { 10280204 1028021F 10280228 (Dell Vostro 1500) + 10280229 (Dell Vostro 1700) */ static unsigned int dell_9205_m42_pin_configs[12] = { 0x0321101F, 0x03A11020, 0x400003FA, 0x90170310, @@ -2189,6 +2190,8 @@ static struct snd_pci_quirk stac9205_cfg_tbl[] = { "Dell Inspiron", STAC_9205_DELL_M44), SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x0228, "Dell Vostro 1500", STAC_9205_DELL_M42), + SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x0229, + "Dell Vostro 1700", STAC_9205_DELL_M42), /* Gateway */ SND_PCI_QUIRK(0x107b, 0x0560, "Gateway T6834c", STAC_9205_EAPD), SND_PCI_QUIRK(0x107b, 0x0565, "Gateway T1616", STAC_9205_EAPD), -- cgit v1.2.3 From 18f98ab54735f66ea84bf679b70fcec5e8b3df66 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Mon, 14 Dec 2009 13:22:04 +0900 Subject: ASoC: fsi-ak4642: Remove ak4642_add_i2c_device I2C devices should be registered when platform board setting in latest ASoC. Signed-off-by: Kuninori Morimoto Signed-off-by: Mark Brown --- sound/soc/sh/fsi-ak4642.c | 30 ------------------------------ 1 file changed, 30 deletions(-) (limited to 'sound') diff --git a/sound/soc/sh/fsi-ak4642.c b/sound/soc/sh/fsi-ak4642.c index c7af09729c6e..5263ab18f827 100644 --- a/sound/soc/sh/fsi-ak4642.c +++ b/sound/soc/sh/fsi-ak4642.c @@ -42,42 +42,12 @@ static struct snd_soc_device fsi_snd_devdata = { .codec_dev = &soc_codec_dev_ak4642, }; -#define AK4642_BUS 0 -#define AK4642_ADR 0x12 -static int ak4642_add_i2c_device(void) -{ - struct i2c_board_info info; - struct i2c_adapter *adapter; - struct i2c_client *client; - - memset(&info, 0, sizeof(struct i2c_board_info)); - info.addr = AK4642_ADR; - strlcpy(info.type, "ak4642", I2C_NAME_SIZE); - - adapter = i2c_get_adapter(AK4642_BUS); - if (!adapter) { - printk(KERN_DEBUG "can't get i2c adapter\n"); - return -ENODEV; - } - - client = i2c_new_device(adapter, &info); - i2c_put_adapter(adapter); - if (!client) { - printk(KERN_DEBUG "can't add i2c device\n"); - return -ENODEV; - } - - return 0; -} - static struct platform_device *fsi_snd_device; static int __init fsi_ak4642_init(void) { int ret = -ENOMEM; - ak4642_add_i2c_device(); - fsi_snd_device = platform_device_alloc("soc-audio", -1); if (!fsi_snd_device) goto out; -- cgit v1.2.3 From b3172f222ab5afdc91ea058bd11c42cf169728f3 Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Thu, 24 Dec 2009 01:13:51 +0100 Subject: ASoC: fix params_rate() macro use in several codecs Sevelar ASoC codec drivers wrongly assume, that the params_rate() macro returns one of SNDRV_PCM_RATE_* defines instead of the actual numerical sampling rate. Fix them. Signed-off-by: Guennadi Liakhovetski Acked-by: Liam Girdwood Signed-off-by: Mark Brown Cc: stable@kernel.org --- sound/soc/codecs/wm8510.c | 14 +++++++------- sound/soc/codecs/wm8940.c | 14 +++++++------- sound/soc/codecs/wm8974.c | 14 +++++++------- 3 files changed, 21 insertions(+), 21 deletions(-) (limited to 'sound') diff --git a/sound/soc/codecs/wm8510.c b/sound/soc/codecs/wm8510.c index 265e68c75df8..af8cb6995a1f 100644 --- a/sound/soc/codecs/wm8510.c +++ b/sound/soc/codecs/wm8510.c @@ -424,23 +424,23 @@ static int wm8510_pcm_hw_params(struct snd_pcm_substream *substream, /* filter coefficient */ switch (params_rate(params)) { - case SNDRV_PCM_RATE_8000: + case 8000: adn |= 0x5 << 1; break; - case SNDRV_PCM_RATE_11025: + case 11025: adn |= 0x4 << 1; break; - case SNDRV_PCM_RATE_16000: + case 16000: adn |= 0x3 << 1; break; - case SNDRV_PCM_RATE_22050: + case 22050: adn |= 0x2 << 1; break; - case SNDRV_PCM_RATE_32000: + case 32000: adn |= 0x1 << 1; break; - case SNDRV_PCM_RATE_44100: - case SNDRV_PCM_RATE_48000: + case 44100: + case 48000: break; } diff --git a/sound/soc/codecs/wm8940.c b/sound/soc/codecs/wm8940.c index 3d850b97037a..31e39ffd1d8e 100644 --- a/sound/soc/codecs/wm8940.c +++ b/sound/soc/codecs/wm8940.c @@ -378,23 +378,23 @@ static int wm8940_i2s_hw_params(struct snd_pcm_substream *substream, iface |= (1 << 9); switch (params_rate(params)) { - case SNDRV_PCM_RATE_8000: + case 8000: addcntrl |= (0x5 << 1); break; - case SNDRV_PCM_RATE_11025: + case 11025: addcntrl |= (0x4 << 1); break; - case SNDRV_PCM_RATE_16000: + case 16000: addcntrl |= (0x3 << 1); break; - case SNDRV_PCM_RATE_22050: + case 22050: addcntrl |= (0x2 << 1); break; - case SNDRV_PCM_RATE_32000: + case 32000: addcntrl |= (0x1 << 1); break; - case SNDRV_PCM_RATE_44100: - case SNDRV_PCM_RATE_48000: + case 44100: + case 48000: break; } ret = snd_soc_write(codec, WM8940_ADDCNTRL, addcntrl); diff --git a/sound/soc/codecs/wm8974.c b/sound/soc/codecs/wm8974.c index a808675388fc..8812751da8c9 100644 --- a/sound/soc/codecs/wm8974.c +++ b/sound/soc/codecs/wm8974.c @@ -482,23 +482,23 @@ static int wm8974_pcm_hw_params(struct snd_pcm_substream *substream, /* filter coefficient */ switch (params_rate(params)) { - case SNDRV_PCM_RATE_8000: + case 8000: adn |= 0x5 << 1; break; - case SNDRV_PCM_RATE_11025: + case 11025: adn |= 0x4 << 1; break; - case SNDRV_PCM_RATE_16000: + case 16000: adn |= 0x3 << 1; break; - case SNDRV_PCM_RATE_22050: + case 22050: adn |= 0x2 << 1; break; - case SNDRV_PCM_RATE_32000: + case 32000: adn |= 0x1 << 1; break; - case SNDRV_PCM_RATE_44100: - case SNDRV_PCM_RATE_48000: + case 44100: + case 48000: break; } -- cgit v1.2.3 From 8b90ca08821fee79e181bfcbc3bbd41ef5637136 Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Thu, 24 Dec 2009 01:17:46 +0100 Subject: ALSA: Fix indentation in pcm_native.c Signed-off-by: Guennadi Liakhovetski Signed-off-by: Takashi Iwai --- sound/core/pcm_native.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'sound') diff --git a/sound/core/pcm_native.c b/sound/core/pcm_native.c index 29ab46a12e11..25b0641e6b8c 100644 --- a/sound/core/pcm_native.c +++ b/sound/core/pcm_native.c @@ -1918,13 +1918,13 @@ int snd_pcm_hw_constraints_complete(struct snd_pcm_substream *substream) err = snd_pcm_hw_constraint_minmax(runtime, SNDRV_PCM_HW_PARAM_RATE, hw->rate_min, hw->rate_max); - if (err < 0) - return err; + if (err < 0) + return err; err = snd_pcm_hw_constraint_minmax(runtime, SNDRV_PCM_HW_PARAM_PERIOD_BYTES, hw->period_bytes_min, hw->period_bytes_max); - if (err < 0) - return err; + if (err < 0) + return err; err = snd_pcm_hw_constraint_minmax(runtime, SNDRV_PCM_HW_PARAM_PERIODS, hw->periods_min, hw->periods_max); -- cgit v1.2.3 From ef18beded8ddbaafdf4914bab209f77e60ae3a18 Mon Sep 17 00:00:00 2001 From: Wu Fengguang Date: Fri, 25 Dec 2009 13:14:27 +0800 Subject: ALSA: hda - HDMI sticky stream tag support When we run the following commands in turn (with CONFIG_SND_HDA_POWER_SAVE_DEFAULT=0), speaker-test -Dhw:0,3 -c2 -twav # HDMI speaker-test -Dhw:0,0 -c2 -twav # Analog The second command will produce sound in the analog lineout _as well as_ HDMI sink. The root cause is, device 0 "reuses" the same stream tag that was used by device 3, and the "intelhdmi - sticky stream id" patch leaves the HDMI codec in a functional state. So the HDMI codec happily accepts the audio samples which reuse its stream tag. The proposed solution is to remember the last device each azx_dev was assigned to, and prefer to 1) reuse the azx_dev (and hence the stream tag) the HDMI codec last used 2) or assign a never-used azx_dev for HDMI With this patch and the above two speaker-test commands, HDMI codec will use stream tag 8 and Analog codec will use 5. The stream tag used by HDMI codec won't be reused by others, as long as we don't run out of the 4 playback azx_dev's. The legacy Analog codec will continue to use stream tag 5 because its device id is 0 (this is a bit tricky). Signed-off-by: Wu Fengguang Signed-off-by: Takashi Iwai --- sound/pci/hda/hda_intel.c | 21 +++++++++++++++------ 1 file changed, 15 insertions(+), 6 deletions(-) (limited to 'sound') diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c index ff8ad46cc50e..ec9c348336cc 100644 --- a/sound/pci/hda/hda_intel.c +++ b/sound/pci/hda/hda_intel.c @@ -356,6 +356,7 @@ struct azx_dev { */ unsigned char stream_tag; /* assigned stream */ unsigned char index; /* stream index */ + int device; /* last device number assigned to */ unsigned int opened :1; unsigned int running :1; @@ -1441,10 +1442,13 @@ static int __devinit azx_codec_configure(struct azx *chip) */ /* assign a stream for the PCM */ -static inline struct azx_dev *azx_assign_device(struct azx *chip, int stream) +static inline struct azx_dev * +azx_assign_device(struct azx *chip, struct snd_pcm_substream *substream) { int dev, i, nums; - if (stream == SNDRV_PCM_STREAM_PLAYBACK) { + struct azx_dev *res = NULL; + + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) { dev = chip->playback_index_offset; nums = chip->playback_streams; } else { @@ -1453,10 +1457,15 @@ static inline struct azx_dev *azx_assign_device(struct azx *chip, int stream) } for (i = 0; i < nums; i++, dev++) if (!chip->azx_dev[dev].opened) { - chip->azx_dev[dev].opened = 1; - return &chip->azx_dev[dev]; + res = &chip->azx_dev[dev]; + if (res->device == substream->pcm->device) + break; } - return NULL; + if (res) { + res->opened = 1; + res->device = substream->pcm->device; + } + return res; } /* release the assigned stream */ @@ -1505,7 +1514,7 @@ static int azx_pcm_open(struct snd_pcm_substream *substream) int err; mutex_lock(&chip->open_mutex); - azx_dev = azx_assign_device(chip, substream->stream); + azx_dev = azx_assign_device(chip, substream); if (azx_dev == NULL) { mutex_unlock(&chip->open_mutex); return -EBUSY; -- cgit v1.2.3 From 729d55ba972348234759f8e40abf8de020f0d505 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Fri, 25 Dec 2009 22:49:01 +0100 Subject: ALSA: hda - Disable tigger at pin-sensing on AD codecs Analog Device codecs seem to have problems with the triggering of pin-sensing although their pincaps give the trigger requirements. Some reported that constant CPU load on HP laptops with AD codecs. For avoiding this regression, add a flag to codec struct to notify explicitly that the codec doesn't suppot the trigger at pin-sensing. Tested-by: Maciej Rutecki Signed-off-by: Takashi Iwai --- sound/pci/hda/hda_codec.c | 10 ++++++---- sound/pci/hda/hda_codec.h | 1 + sound/pci/hda/patch_analog.c | 16 ++++++++++++++++ 3 files changed, 23 insertions(+), 4 deletions(-) (limited to 'sound') diff --git a/sound/pci/hda/hda_codec.c b/sound/pci/hda/hda_codec.c index 950ee5cfcacf..f98b47cd6cfb 100644 --- a/sound/pci/hda/hda_codec.c +++ b/sound/pci/hda/hda_codec.c @@ -1327,11 +1327,13 @@ EXPORT_SYMBOL_HDA(snd_hda_query_pin_caps); */ u32 snd_hda_pin_sense(struct hda_codec *codec, hda_nid_t nid) { - u32 pincap = snd_hda_query_pin_caps(codec, nid); - - if (pincap & AC_PINCAP_TRIG_REQ) /* need trigger? */ - snd_hda_codec_read(codec, nid, 0, AC_VERB_SET_PIN_SENSE, 0); + u32 pincap; + if (!codec->no_trigger_sense) { + pincap = snd_hda_query_pin_caps(codec, nid); + if (pincap & AC_PINCAP_TRIG_REQ) /* need trigger? */ + snd_hda_codec_read(codec, nid, 0, AC_VERB_SET_PIN_SENSE, 0); + } return snd_hda_codec_read(codec, nid, 0, AC_VERB_GET_PIN_SENSE, 0); } diff --git a/sound/pci/hda/hda_codec.h b/sound/pci/hda/hda_codec.h index 1d541b7f5547..0a770a28e71f 100644 --- a/sound/pci/hda/hda_codec.h +++ b/sound/pci/hda/hda_codec.h @@ -817,6 +817,7 @@ struct hda_codec { unsigned int pin_amp_workaround:1; /* pin out-amp takes index * (e.g. Conexant codecs) */ + unsigned int no_trigger_sense:1; /* don't trigger at pin-sensing */ #ifdef CONFIG_SND_HDA_POWER_SAVE unsigned int power_on :1; /* current (global) power-state */ unsigned int power_transition :1; /* power-state in transition */ diff --git a/sound/pci/hda/patch_analog.c b/sound/pci/hda/patch_analog.c index 1a36137e13ec..69a941c7b158 100644 --- a/sound/pci/hda/patch_analog.c +++ b/sound/pci/hda/patch_analog.c @@ -1186,6 +1186,8 @@ static int patch_ad1986a(struct hda_codec *codec) */ spec->multiout.no_share_stream = 1; + codec->no_trigger_sense = 1; + return 0; } @@ -1371,6 +1373,8 @@ static int patch_ad1983(struct hda_codec *codec) codec->patch_ops = ad198x_patch_ops; + codec->no_trigger_sense = 1; + return 0; } @@ -1813,6 +1817,9 @@ static int patch_ad1981(struct hda_codec *codec) codec->patch_ops.unsol_event = ad1981_hp_unsol_event; break; } + + codec->no_trigger_sense = 1; + return 0; } @@ -3118,6 +3125,8 @@ static int patch_ad1988(struct hda_codec *codec) #endif spec->vmaster_nid = 0x04; + codec->no_trigger_sense = 1; + return 0; } @@ -3330,6 +3339,8 @@ static int patch_ad1884(struct hda_codec *codec) codec->patch_ops = ad198x_patch_ops; + codec->no_trigger_sense = 1; + return 0; } @@ -4287,6 +4298,8 @@ static int patch_ad1884a(struct hda_codec *codec) break; } + codec->no_trigger_sense = 1; + return 0; } @@ -4623,6 +4636,9 @@ static int patch_ad1882(struct hda_codec *codec) spec->mixers[2] = ad1882_6stack_mixers; break; } + + codec->no_trigger_sense = 1; + return 0; } -- cgit v1.2.3 From a252c81a69c4f9a5a8782f33b91bd837e9dcd406 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Fri, 25 Dec 2009 22:56:20 +0100 Subject: ALSA: hda - use snd_hda_jack_detect() again in patch_sigmatel.c Use snd_hda_jack_detect() again for jack-sensing. The triggering problem can be worked around with codec->no_trigger_sense flag now. Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_sigmatel.c | 18 ++++++++++-------- 1 file changed, 10 insertions(+), 8 deletions(-) (limited to 'sound') diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c index eeda7beeb57a..2291a8396817 100644 --- a/sound/pci/hda/patch_sigmatel.c +++ b/sound/pci/hda/patch_sigmatel.c @@ -4453,14 +4453,7 @@ static inline int get_pin_presence(struct hda_codec *codec, hda_nid_t nid) { if (!nid) return 0; - /* NOTE: we can't use snd_hda_jack_detect() here because STAC/IDT - * codecs behave wrongly when SET_PIN_SENSE is triggered, although - * the pincap gives TRIG_REQ bit. - */ - if (snd_hda_codec_read(codec, nid, 0, AC_VERB_GET_PIN_SENSE, 0) & - AC_PINSENSE_PRESENCE) - return 1; - return 0; + return snd_hda_jack_detect(codec, nid); } static void stac92xx_line_out_detect(struct hda_codec *codec, @@ -4962,6 +4955,7 @@ static int patch_stac9200(struct hda_codec *codec) if (spec == NULL) return -ENOMEM; + codec->no_trigger_sense = 1; codec->spec = spec; spec->num_pins = ARRAY_SIZE(stac9200_pin_nids); spec->pin_nids = stac9200_pin_nids; @@ -5024,6 +5018,7 @@ static int patch_stac925x(struct hda_codec *codec) if (spec == NULL) return -ENOMEM; + codec->no_trigger_sense = 1; codec->spec = spec; spec->num_pins = ARRAY_SIZE(stac925x_pin_nids); spec->pin_nids = stac925x_pin_nids; @@ -5108,6 +5103,7 @@ static int patch_stac92hd73xx(struct hda_codec *codec) if (spec == NULL) return -ENOMEM; + codec->no_trigger_sense = 1; codec->spec = spec; codec->slave_dig_outs = stac92hd73xx_slave_dig_outs; spec->num_pins = ARRAY_SIZE(stac92hd73xx_pin_nids); @@ -5255,6 +5251,7 @@ static int patch_stac92hd83xxx(struct hda_codec *codec) if (spec == NULL) return -ENOMEM; + codec->no_trigger_sense = 1; codec->spec = spec; codec->slave_dig_outs = stac92hd83xxx_slave_dig_outs; spec->digbeep_nid = 0x21; @@ -5418,6 +5415,7 @@ static int patch_stac92hd71bxx(struct hda_codec *codec) if (spec == NULL) return -ENOMEM; + codec->no_trigger_sense = 1; codec->spec = spec; codec->patch_ops = stac92xx_patch_ops; spec->num_pins = STAC92HD71BXX_NUM_PINS; @@ -5661,6 +5659,7 @@ static int patch_stac922x(struct hda_codec *codec) if (spec == NULL) return -ENOMEM; + codec->no_trigger_sense = 1; codec->spec = spec; spec->num_pins = ARRAY_SIZE(stac922x_pin_nids); spec->pin_nids = stac922x_pin_nids; @@ -5764,6 +5763,7 @@ static int patch_stac927x(struct hda_codec *codec) if (spec == NULL) return -ENOMEM; + codec->no_trigger_sense = 1; codec->spec = spec; codec->slave_dig_outs = stac927x_slave_dig_outs; spec->num_pins = ARRAY_SIZE(stac927x_pin_nids); @@ -5898,6 +5898,7 @@ static int patch_stac9205(struct hda_codec *codec) if (spec == NULL) return -ENOMEM; + codec->no_trigger_sense = 1; codec->spec = spec; spec->num_pins = ARRAY_SIZE(stac9205_pin_nids); spec->pin_nids = stac9205_pin_nids; @@ -6053,6 +6054,7 @@ static int patch_stac9872(struct hda_codec *codec) spec = kzalloc(sizeof(*spec), GFP_KERNEL); if (spec == NULL) return -ENOMEM; + codec->no_trigger_sense = 1; codec->spec = spec; spec->num_pins = ARRAY_SIZE(stac9872_pin_nids); spec->pin_nids = stac9872_pin_nids; -- cgit v1.2.3 From 903b0eb39e3284cbf4d5a3773858e9586d16cbda Mon Sep 17 00:00:00 2001 From: Peter Huewe Date: Sat, 26 Dec 2009 03:27:45 +0100 Subject: ALSA: sound/arm: Fix build failure caused by missing struct aaci definition This patch fixes a build failure introduced by the patch ALSA: AACI: factor common hw_params logic into aaci_pcm_hw_params [1] by adding/moving the aaci struct to the right position. The patch mentioned above merged common source parts into one function, but unfortunately left out the aaci struct and consequently caused a build failure e.g. for arm versatile_config [2] References: [1] http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commitdiff;h=d3aee7996c30f928bbbbfd0994148e35d2e83084 [2] http://kisskb.ellerman.id.au/kisskb/buildresult/1893605/ Patch against Linus' tree. Signed-off-by: Peter Huewe Signed-off-by: Takashi Iwai --- sound/arm/aaci.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'sound') diff --git a/sound/arm/aaci.c b/sound/arm/aaci.c index c5699863643b..656e474dca47 100644 --- a/sound/arm/aaci.c +++ b/sound/arm/aaci.c @@ -441,6 +441,7 @@ static int aaci_pcm_hw_params(struct snd_pcm_substream *substream, struct snd_pcm_hw_params *params) { int err; + struct aaci *aaci = substream->private_data; aaci_pcm_hw_free(substream); if (aacirun->pcm_open) { @@ -560,7 +561,6 @@ static int aaci_pcm_open(struct snd_pcm_substream *substream) static int aaci_pcm_playback_hw_params(struct snd_pcm_substream *substream, struct snd_pcm_hw_params *params) { - struct aaci *aaci = substream->private_data; struct aaci_runtime *aacirun = substream->runtime->private_data; unsigned int channels = params_channels(params); int ret; @@ -659,7 +659,6 @@ static struct snd_pcm_ops aaci_playback_ops = { static int aaci_pcm_capture_hw_params(struct snd_pcm_substream *substream, struct snd_pcm_hw_params *params) { - struct aaci *aaci = substream->private_data; struct aaci_runtime *aacirun = substream->runtime->private_data; int ret; -- cgit v1.2.3 From 411fe85c7653f51403c2a6fd9026b0db2ab19478 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Sun, 27 Dec 2009 10:25:58 +0100 Subject: ALSA: hda - Don't cache beep controls The beep control verbs don't need to be cached for resume. Signed-off-by: Takashi Iwai --- sound/pci/hda/hda_beep.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'sound') diff --git a/sound/pci/hda/hda_beep.c b/sound/pci/hda/hda_beep.c index 5fe34a8d8c81..ca3c57a5f888 100644 --- a/sound/pci/hda/hda_beep.c +++ b/sound/pci/hda/hda_beep.c @@ -42,7 +42,7 @@ static void snd_hda_generate_beep(struct work_struct *work) return; /* generate tone */ - snd_hda_codec_write_cache(codec, beep->nid, 0, + snd_hda_codec_write(codec, beep->nid, 0, AC_VERB_SET_BEEP_CONTROL, beep->tone); } @@ -119,7 +119,7 @@ static void snd_hda_do_detach(struct hda_beep *beep) beep->dev = NULL; cancel_work_sync(&beep->beep_work); /* turn off beep for sure */ - snd_hda_codec_write_cache(beep->codec, beep->nid, 0, + snd_hda_codec_write(beep->codec, beep->nid, 0, AC_VERB_SET_BEEP_CONTROL, 0); } @@ -192,7 +192,7 @@ int snd_hda_enable_beep_device(struct hda_codec *codec, int enable) beep->enabled = enable; if (!enable) { /* turn off beep */ - snd_hda_codec_write_cache(beep->codec, beep->nid, 0, + snd_hda_codec_write(beep->codec, beep->nid, 0, AC_VERB_SET_BEEP_CONTROL, 0); } if (beep->mode == HDA_BEEP_MODE_SWREG) { -- cgit v1.2.3 From 54f7190b23080c7ac32078ed6a346bdc591ebef1 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Sun, 27 Dec 2009 13:27:39 +0100 Subject: ALSA: hda - Fix Oops at reloading beep devices The recent change for supporting dynamic beep device allocation caused a problem resulting in Oops at reloading the driver. Also, it ignores the error from input device registration. This patch fixes the wrong check in snd_hda_detach_beep_device(), and returns an error when the input device registration fails properly. Signed-off-by: Takashi Iwai --- sound/pci/hda/hda_beep.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) (limited to 'sound') diff --git a/sound/pci/hda/hda_beep.c b/sound/pci/hda/hda_beep.c index ca3c57a5f888..e4581a42ace5 100644 --- a/sound/pci/hda/hda_beep.c +++ b/sound/pci/hda/hda_beep.c @@ -239,8 +239,12 @@ int snd_hda_attach_beep_device(struct hda_codec *codec, int nid) mutex_init(&beep->mutex); if (beep->mode == HDA_BEEP_MODE_ON) { - beep->enabled = 1; - snd_hda_do_register(&beep->register_work); + int err = snd_hda_do_attach(beep); + if (err < 0) { + kfree(beep); + codec->beep = NULL; + return err; + } } return 0; @@ -253,7 +257,7 @@ void snd_hda_detach_beep_device(struct hda_codec *codec) if (beep) { cancel_work_sync(&beep->register_work); cancel_delayed_work(&beep->unregister_work); - if (beep->enabled) + if (beep->dev) snd_hda_do_detach(beep); codec->beep = NULL; kfree(beep); -- cgit v1.2.3 From ecbec242961ec66e900b5649ded1e40f5d5edc41 Mon Sep 17 00:00:00 2001 From: Manuel Lauss Date: Mon, 4 Jan 2010 16:29:49 +0100 Subject: ASoC: fixup oops in generic AC97 codec glue Initialize the glue by calling snd_soc_new_ac97_codec() as is done in other ASoC AC97 codecs. Fixes an oops caused by dereferencing uninitialized members in snd_soc_new_pcms(). Run-tested on Au1250. Signed-off-by: Manuel Lauss Acked-by: Liam Girdwood Signed-off-by: Mark Brown --- sound/soc/codecs/ac97.c | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'sound') diff --git a/sound/soc/codecs/ac97.c b/sound/soc/codecs/ac97.c index 69bd0acc81c8..a1bbe16b7f96 100644 --- a/sound/soc/codecs/ac97.c +++ b/sound/soc/codecs/ac97.c @@ -102,6 +102,12 @@ static int ac97_soc_probe(struct platform_device *pdev) INIT_LIST_HEAD(&codec->dapm_widgets); INIT_LIST_HEAD(&codec->dapm_paths); + ret = snd_soc_new_ac97_codec(codec, &soc_ac97_ops, 0); + if (ret < 0) { + printk(KERN_ERR "ASoC: failed to init gen ac97 glue\n"); + goto err; + } + /* register pcms */ ret = snd_soc_new_pcms(socdev, SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1); if (ret < 0) -- cgit v1.2.3