From ad43d528a7ac5636cf113cb09644d3ec18129123 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Fri, 2 Nov 2018 22:11:33 +0100 Subject: ALSA: usb-audio: Define registers for CM6206 The register map for CM6206 is known and we can define what the values written to the different registers actually mean. I tested to print the hex values before/after this change, there is no functional change. Signed-off-by: Linus Walleij Signed-off-by: Takashi Iwai --- sound/usb/quirks.c | 129 ++++++++++++++++++++++++++++++++++++++++++++++++++--- 1 file changed, 124 insertions(+), 5 deletions(-) (limited to 'sound/usb') diff --git a/sound/usb/quirks.c b/sound/usb/quirks.c index 8a945ece9869..3d0f09108c98 100644 --- a/sound/usb/quirks.c +++ b/sound/usb/quirks.c @@ -19,6 +19,7 @@ #include #include #include +#include #include #include @@ -668,15 +669,133 @@ static int snd_usb_cm106_boot_quirk(struct usb_device *dev) } /* - * C-Media CM6206 is based on CM106 with two additional - * registers that are not documented in the data sheet. - * Values here are chosen based on sniffing USB traffic - * under Windows. + * CM6206 registers from the CM6206 datasheet rev 2.1 */ +#define CM6206_REG0_DMA_MASTER BIT(15) +#define CM6206_REG0_SPDIFO_RATE_48K (2 << 12) +#define CM6206_REG0_SPDIFO_RATE_96K (7 << 12) +/* Bit 4 thru 11 is the S/PDIF category code */ +#define CM6206_REG0_SPDIFO_CAT_CODE_GENERAL (0 << 4) +#define CM6206_REG0_SPDIFO_EMPHASIS_CD BIT(3) +#define CM6206_REG0_SPDIFO_COPYRIGHT_NA BIT(2) +#define CM6206_REG0_SPDIFO_NON_AUDIO BIT(1) +#define CM6206_REG0_SPDIFO_PRO_FORMAT BIT(0) + +#define CM6206_REG1_TEST_SEL_CLK BIT(14) +#define CM6206_REG1_PLLBIN_EN BIT(13) +#define CM6206_REG1_SOFT_MUTE_EN BIT(12) +#define CM6206_REG1_GPIO4_OUT BIT(11) +#define CM6206_REG1_GPIO4_OE BIT(10) +#define CM6206_REG1_GPIO3_OUT BIT(9) +#define CM6206_REG1_GPIO3_OE BIT(8) +#define CM6206_REG1_GPIO2_OUT BIT(7) +#define CM6206_REG1_GPIO2_OE BIT(6) +#define CM6206_REG1_GPIO1_OUT BIT(5) +#define CM6206_REG1_GPIO1_OE BIT(4) +#define CM6206_REG1_SPDIFO_INVALID BIT(3) +#define CM6206_REG1_SPDIF_LOOP_EN BIT(2) +#define CM6206_REG1_SPDIFO_DIS BIT(1) +#define CM6206_REG1_SPDIFI_MIX BIT(0) + +#define CM6206_REG2_DRIVER_ON BIT(15) +#define CM6206_REG2_HEADP_SEL_SIDE_CHANNELS (0 << 13) +#define CM6206_REG2_HEADP_SEL_SURROUND_CHANNELS (1 << 13) +#define CM6206_REG2_HEADP_SEL_CENTER_SUBW (2 << 13) +#define CM6206_REG2_HEADP_SEL_FRONT_CHANNELS (3 << 13) +#define CM6206_REG2_MUTE_HEADPHONE_RIGHT BIT(12) +#define CM6206_REG2_MUTE_HEADPHONE_LEFT BIT(11) +#define CM6206_REG2_MUTE_REAR_SURROUND_RIGHT BIT(10) +#define CM6206_REG2_MUTE_REAR_SURROUND_LEFT BIT(9) +#define CM6206_REG2_MUTE_SIDE_SURROUND_RIGHT BIT(8) +#define CM6206_REG2_MUTE_SIDE_SURROUND_LEFT BIT(7) +#define CM6206_REG2_MUTE_SUBWOOFER BIT(6) +#define CM6206_REG2_MUTE_CENTER BIT(5) +#define CM6206_REG2_MUTE_RIGHT_FRONT BIT(3) +#define CM6206_REG2_MUTE_LEFT_FRONT BIT(3) +#define CM6206_REG2_EN_BTL BIT(2) +#define CM6206_REG2_MCUCLKSEL_1_5_MHZ (0) +#define CM6206_REG2_MCUCLKSEL_3_MHZ (1) +#define CM6206_REG2_MCUCLKSEL_6_MHZ (2) +#define CM6206_REG2_MCUCLKSEL_12_MHZ (3) + +/* Bit 11..13 sets the sensitivity to FLY tuner volume control VP/VD signal */ +#define CM6206_REG3_FLYSPEED_DEFAULT (2 << 11) +#define CM6206_REG3_VRAP25EN BIT(10) +#define CM6206_REG3_MSEL1 BIT(9) +#define CM6206_REG3_SPDIFI_RATE_44_1K BIT(0 << 7) +#define CM6206_REG3_SPDIFI_RATE_48K BIT(2 << 7) +#define CM6206_REG3_SPDIFI_RATE_32K BIT(3 << 7) +#define CM6206_REG3_PINSEL BIT(6) +#define CM6206_REG3_FOE BIT(5) +#define CM6206_REG3_ROE BIT(4) +#define CM6206_REG3_CBOE BIT(3) +#define CM6206_REG3_LOSE BIT(2) +#define CM6206_REG3_HPOE BIT(1) +#define CM6206_REG3_SPDIFI_CANREC BIT(0) + +#define CM6206_REG5_DA_RSTN BIT(13) +#define CM6206_REG5_AD_RSTN BIT(12) +#define CM6206_REG5_SPDIFO_AD2SPDO BIT(12) +#define CM6206_REG5_SPDIFO_SEL_FRONT (0 << 9) +#define CM6206_REG5_SPDIFO_SEL_SIDE_SUR (1 << 9) +#define CM6206_REG5_SPDIFO_SEL_CEN_LFE (2 << 9) +#define CM6206_REG5_SPDIFO_SEL_REAR_SUR (3 << 9) +#define CM6206_REG5_CODECM BIT(8) +#define CM6206_REG5_EN_HPF BIT(7) +#define CM6206_REG5_T_SEL_DSDA4 BIT(6) +#define CM6206_REG5_T_SEL_DSDA3 BIT(5) +#define CM6206_REG5_T_SEL_DSDA2 BIT(4) +#define CM6206_REG5_T_SEL_DSDA1 BIT(3) +#define CM6206_REG5_T_SEL_DSDAD_NORMAL 0 +#define CM6206_REG5_T_SEL_DSDAD_FRONT 4 +#define CM6206_REG5_T_SEL_DSDAD_S_SURROUND 5 +#define CM6206_REG5_T_SEL_DSDAD_CEN_LFE 6 +#define CM6206_REG5_T_SEL_DSDAD_R_SURROUND 7 + static int snd_usb_cm6206_boot_quirk(struct usb_device *dev) { int err = 0, reg; - int val[] = {0x2004, 0x3000, 0xf800, 0x143f, 0x0000, 0x3000}; + int val[] = { + /* + * Values here are chosen based on sniffing USB traffic + * under Windows. + * + * REG0: DAC is master, sample rate 48kHz, no copyright + */ + CM6206_REG0_SPDIFO_RATE_48K | + CM6206_REG0_SPDIFO_COPYRIGHT_NA, + /* + * REG1: PLL binary search enable, soft mute enable. + */ + CM6206_REG1_PLLBIN_EN | + CM6206_REG1_SOFT_MUTE_EN | + /* + * REG2: enable output drivers, + * select front channels to the headphone output, + * then mute the headphone channels, run the MCU + * at 1.5 MHz. + */ + CM6206_REG2_DRIVER_ON | + CM6206_REG2_HEADP_SEL_FRONT_CHANNELS | + CM6206_REG2_MUTE_HEADPHONE_RIGHT | + CM6206_REG2_MUTE_HEADPHONE_LEFT, + /* + * REG3: default flyspeed, set 2.5V mic bias + * enable all line out ports and enable SPDIF + */ + CM6206_REG3_FLYSPEED_DEFAULT | + CM6206_REG3_VRAP25EN | + CM6206_REG3_FOE | + CM6206_REG3_ROE | + CM6206_REG3_CBOE | + CM6206_REG3_LOSE | + CM6206_REG3_HPOE | + CM6206_REG3_SPDIFI_CANREC, + /* REG4 is just a bunch of GPIO lines */ + 0x0000, + /* REG5: de-assert AD/DA reset signals */ + CM6206_REG5_DA_RSTN | + CM6206_REG5_AD_RSTN }; for (reg = 0; reg < ARRAY_SIZE(val); reg++) { err = snd_usb_cm106_write_int_reg(dev, reg, val[reg]); -- cgit v1.2.3